Karnataka Power Transmission Corporation Limited Tender

Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards. Including cost of materials, labour, HOM complete as per specification.(pg no 267/I no 37.12)

Providing and applying painting two coats( Excluding Priming Coat ) On New wood Surface and / or wood based surface with enamel paint to give an even shade cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of material DSR P.No.119 item No.15.60.1

Providing and fixing 4mm thick glass panes to steel windows and frames including T.W beading of 10mm thick and 2 coats of approved paint item no 37.16 pg.no 267

Providing and laying in position plain cement concrete of mix M15 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.(PG NO 13/I NO 4.6)

Providing applying two coats of wall care putty to inside plastered walls & celing using white cement putty.Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers ,including cost of all materials ,cost of labour and scaffolding etc.,complete as per specifications SR item 15.106 Pg-128

Providing and applying two coats with Plastic emulsion paint of approved brand and shade on wall surface to give an even shade after throughly brushing the surface free from marter drops and other fore matter including preparing the surface even and sand paper smooth cost of material, labour, complete as per specifications. SR Page NO 119 Item No 15.51.2 with primer

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of aproved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other forgien matter cost of materials, labour, complete as per specifications. with primer I.No.15.104 pg. 127

Providing, fabricating, assembling and fixing in position aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg/ m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to length joint metred corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sectionstreated for removal of any rust and prevention of further rust formation,and coated with greasy materials for non-adherance of mortars or anyother sticky materials; the assembled frame fitted with the corner angles,strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C.columns or masonry on sides. beams and flooring in bottom. includingcutting, chistling and making good with cement mortar to match thesurface; all the frames throughly cleaned free from rust, scale, or dirtincluding cost of materials, fixtures, labour and HOM of machinerycomplete as per specifications.(pg no 38/i no 7.17)

Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm working pressure 25mm outside diameterchemp plast / Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications.(pg no 96/i no 13.76)

Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements,making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications. ( For 1000 litre capacity ) Specification No. KBS 13.22 P.No 96 / item 13.78

Stop cock(pg no CCVI/I NO 677)

Hudrolic drilling machine installing pipe including GST all materials,labours,transportation,etc(MR)

Rewiring :Electrification open conduit system:Supplying heavy gauge PVC conduit pipe ……….dia confirmingto IS 2509 with suitable size bends, junction boxes adhesive paste etc,.& fixing using inverted wood plugs in case of RCC ceiling & RCC wall stone structure or rawl plugs in case of brickwalls & cement plastring damaged portion using heavy gaugesaddles at an interval of 700mm using NF screws.(25 mm dia 2mm thick) pg no-2 item no 1.1 25mm dia 2mm thick

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. Pg no 6 item no 2.6 a.1 sqmm

b. 2.5 Sqmm

c. 4.00 sqmm

Supplying & fixing/replacing of 6/16/32 Amps electrical accessories on existing switch board SR item no.3.14 P.No.11 a. 6 Amps 3 way 5 pin socket

b. 16/6 Amps combined plug and socket with control ewitch

c. stepped fan regulator

d. 32 Amps backlite DP

e. 6 Amps lamp holder

f. 6 Amps SP switch

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Bricks/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete item no.3.3 pg no.9 a. 1-3 Way

b. 6 Way

c. 10-12 Way

supplying and fixing of modular MCB Devices (tripper) with breaking capacity of 6 KA 16-32 amps DSR P.NO.31 I.NO.5.46.1

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-3741979 and with double ball bearing system.(PG NO 46/I NO 7.3) a. 48" Sweep (1200mm) Regular model

Supply of round square recess surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input 220-240V 50 60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition(pg no 65 i no a LED square or round down light 5 6 W