Karnataka Power Transmission Corporation Limited Tender

Providing Ceramic tiles of approved make, shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing using white cement using colour pigment, including cost of materials, labour, curing, complete as per specifications.for Ceramic Tiles 30cmx60mm 6mm thick on a bed of 20 mm thick

Providing and laying flooring for corridors/lobbies using combination of pre polished 19mm thick water cut/gang saw Grey Granite, Black Granite, and strips of 50mm wide pre flammed grey granite using pre polished grey granite 19mm thick 76%, pre polished black granite 19mm thick @2% and preflamed 19mm thick grey granite @22% over existing cement concrete bed in CM 1:4 average 20mm thick pointed with white cement/colour pigment etc., complete.using 19mm thick granite width not less than 1200mm for fixing of wash basins, for providing vertical in between gents urinals

Constructing brick masonry inspection chamber 450x300mm and 450 mm depth (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I. cover withframe (light duty) 450x300mm. internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg), R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications

Providng and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kg / sq.cm working pressure chemp plast / wavin or eqvivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of materials, labour charges, HOM of equipments and testing complete as per speicifications. with 110mm outer dia

Providing and fixing white vitreous china clay, water closet European type (Pedestal type, P-trap) with black solid plastic seat and lid, C.P. brass hings, rubber buffers. 10 litre low level, P.V.C. flushing clistern (all are approved make) with fittings, C.I. / M.S. brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing white vitreous china clay, flat back, lipped front urinal basin of 430x260x350mm with 5 litres PVC automatic flushing cistern, C.I. / M.S. brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

Providing and fixing white vitreous china clay, flat back wash basin 630x450mm with a single 15mm C.P. brass pillar tap with C.I. /M.S. brackets, 32 mm C.P. brass waste of standard pattern, including Brass stop cock, 32mm PVC connection painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

ISOPROOF SEALER Providing waterproof treatment to roof slab using 2 coats of acrylic co polymer elastomeric ISOPROOF sealer & protector. The surface shall be prepared free of tar, dust, fungus, loose particles etc.,The surface shall be applied with basecoat of crystallization liquid and then ISOPROOF, wetting agent and liquid (1:1:6) over the prepared surface. In addition the surface shall be provided with polysulphide/ acrylic sealant to V groves, making haunch at junction of parapet and roof slab and at damaged portion using patching mortar to drain off rain water. Over this one coat of flexible cementatious membrane (FCM), Spreading 2 layers of 40 gsm non woven geotextile membrane as reinforcing material (over FCM) with one primer coat of ISOPROOF & applying second coat of ISOPROOF liquid over the primer coat - conforming to ASTM D 412 - 1992. The work shall be carried out as per the directions of the Engineer in charge

Providing and fixing 4mm thick glass panes to steel windows including T.W. beading of 10 mm thick and 2 coats of approved paints.including cost of materials, labour, HOM complete as per specifications

Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32 mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V. stabilized Isopthalic Gelcoat and one layer of 45 gsm E-Glass Chopped strand Mat (CSM). Impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc., shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in cofirmation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of suppy of shutters to respective work spot

Repairs to alluminium door shutter & window shelter with necessary rubber/PVC gasket, hydrolic door closer, necessaray alluminium clips, window handles etc., complete as per directions of engineer incharge of work

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for not and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (Internal work exposed on on wall) 20mm nominal OD pipes

Providing and fixing C.P. brass towel rail 600mm length, 20mm dia with C.P. brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications

Providing and fixing 1500x450mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications

Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after throughly brooming the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. with primer

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications

Providing and applying enamel painting two coats over one coat of primer of approved colour and make to wood/matel surface and / or wood based surface after preparing the surface after throughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting liquid wood filler, for varnish including cost of materials, labour, complete as per specifications

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of materials, cost of labour and scaffolding etc., complete as per the specifications

Cleaning of glazed tiles including cost of materials. Labour, HOM complete as per specifications

Cleaning glass with chemicals including cost of materials. Labour, HOM complete as per specifications