Karnataka Cooperative Milk Producers Federation Limited Tender

code04 - Providing and fixing of flooring using 50mm x 50mm 14 gauge pipe frame of platform & 18mm Fiber cement sheet is fixed to metal frame & over the fiber cement sheet 1.5mm thick Vinyl Flooring will be done. Cost of work includes materials, transportation, labour, HOM, tools & tackles, ect all complete.

code05 - Display Name board - Providing ACP(Providing and fixing of of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/ beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501 1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reversesides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete.For Straight Portion(Vol-II, 2024 SR,P-71, I-10.15 )for two sides) with pressed letter having the lights within the letters 10 " x 20& quot;EUROBOND ACP 3 mm thick (Market rate)

code06 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements forinside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Vol-II, 2024 SR,P-76, I- 11.6.1)

code07 - Providing and fixing of Toughened glass 12 mm thickness with hole and fixing it to the existing wall/ceiling including cost of materials,labour,and complete as per specifications. AS PER REQUREMENT . (Iteam No Material971)

code08 - Providing and fixing of 19mm thick 710 grade F R P grade playWood and fixing it to the existing wall/ceiling including cost of materials,labour,and complete as per specifications. AS PER REQUREMENT .

code09 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Vol-II, 2024 SR,P-48, I- 8.41)

code10 - 40Kg/m Density 50mm thk PU Sandwich panel with 0.4mm Galvnused MS Sheet on both sides . Cost of work includes transportation , fixing , HOM, tools & tackles, etcall complete.

code11 - Supplying and drawing Flexible Multicore Cable manufactured withelectrolytic grade flexible copper with low conductor confirming toIS 8130-1984 and (Virgin) PVC insulation sheathed suitable forworking voltage upto 1100 Volts as per IS-694:1990(P. No. 6, I.No. 2.5.2) 3C x 1.5 mm2

code12 - Supplying and drawing Flexible Multicore Cable manufactured withelectrolytic grade flexible copper with low conductor confirming toIS 8130-1984 and (Virgin) PVC insulation sheathed suitable forworking voltage upto 1100 Volts as per IS-694:1990(P. No. 6, I.No. 2.5.2)3C x 2.5 mm2

code13 - Supplying and drawing Flexible Multicore Cable manufactured withelectrolytic grade flexible copper with low conductor confirming toIS 8130-1984 and (Virgin) PVC insulation sheathed suitable forworking voltage upto 1100 Volts as per IS-694:1990(P. No. 6, I.No. 2.5.2)3C x 4 mm2

code14 - Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (P.No. VOL 6 78., I.No. 2.2.1) Short point upto 3Mtr from tapping point to out

code15 - Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (P.No. VOL 6 78., I.No. 2.2.1)Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box

code16 - Supplying and fixing electro mechanical / Pneumatic timeswitches. (P No15 I No6.21)

code17 - Supplying and fixing of metal clad industrial plugs and sockets.(P No15 I No3.13.1, 3.13.2) 32Amps Flush / Projected type DP switch

code18 - Supplying and fixing of metal clad industrial plugs and sockets.(P No15 I No3.13.1, 3.13.2)16 Amps Flush type Universal socket

code19 - Supplying and fixing capacitor's (of approved make) for window/split air conditioners 80 to 200mfd starting capacitor. (P.No. 47, I.No.6.16.2)5-32 Amps DP

code20 - Supplying of 4 feet - LED PVC square batten 28 W with high quality diffuser with life of 25000 burning hours & 70 % lumen maintenance with CRI Power input: 220-240v @ 50 Hz & Power factor greater than 0.9 80. along with CE approved drivers. 5 Years warranty against any manufacturing defect working under standard Electrical condition.28W 5700K suitable for indoor LED fitting. (P.No. 25, I-12.51.6)

code21 - Fixing all types and all capacities of fluorescent /false ceiling / spotlight / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders (P.No. 56, I.No. 13.7.1)

code22 - Providing And Fixing Clip On Boards with Light of Nandini Mik And Milk Products Branding for The Nandini Parlour

code23 - Providing And Fixing Awning for the Nandini Parlour with Approved fabric and Colour of White and Blue, (Single Side Strips)Work Includes of Transportation,Materials, Labours and HOM

code24 - Providing Power sanction, service main works including UG cable, Energy Meter, MCB, and ELCB mounted in metal box, DG Point 30 in Earthling Work etc. complete.

code25 - Providing water supply from nearby point including laying of CPVC pipe, Sanitary pipe lines etc.,