Directorate Of Municipal Administration Tender

code11 - Fixingaceiling /wall mounting fanof all capacities and all types, with necessary clamps and 'S' hookmadeoutof15mmdiaMSrod, with5A. ceiling roseofapproved qualitywithnecessarylengthof 23/0.0076inchPVCinsulatedtwintwistedwireofapprovedquality, mounted on a suitable size wooden board and wired. (PWD ele CSR 2023-24 page No.57 Item No.13.11 VOL-6)

code16 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(PWD SR 2023-24 Vol.02 items.13.34 p.no.121)

code07 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. PWD DSR 2023-24 I.NO 12.54 vol 2

code19 - Camera ,internet, electrical work, and computer set,furniture work(Tables,chairs,sofaas)

code13 - Supplying&fixingof retrofit type-LEDbulb...... should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.18W, 6500K(KPTCL SR 2023-24 Vol.06 Electrical items.11.11.7 p.no.47)

code04 - polyurethane based single Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof urface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2, having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification.(PWD SR 2023-24 Vol.02 items.15.2 p.no.148)

code06 - White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps SR 2023-24 Vol.02 items.14.7.1 p.no.132)

code14 - Providing and fixing brass bib cock of approved quality : 15 mm nominal bore..(PWD SR 2023-24 Vol.02 items.13.2.1 p.no.117)

code02 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete.PWD DSR 2023-24 VOL-2, P.NO.-70, I.NO-10.14

code18 - Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge.PWD DSR 2023-24 Vol.2 I.no.8.54.1 P.no.50

code12 - Fixing one exhaust fan inthenitchalready left inthewallwithbolts andnuts and5A. ceiling rose with sufficient lengthof 23/0.0076 inch PVC insulated twin core wire. (PWD ele CSR 2023-24 page No.57 Item No.13.14 VOL-6)

code05 - Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.(PWD SR 2023-24 Vol.02 items.14.35.1 p.no.137)

code08 - Repairing door and window frames with available wood to the required size. PWD DSR 2023-24 I.NO 20.103 p.no.207 vol 2

code09 - Providing and fixing glass wool slab 12mm thick resin bonded slab with density 48kg/m3 for insulation of cavity wall, fixed using GI wire 200 SWG, GI chicken mesh 12.50mm x 24 SWG including necessary criss-cross GI wire mesh,raw plugs, adhesive etc., complete. PWD DSR 2023-24 I.NO 203 p.no.A-18 vol 2

code17 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/e fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia PipesPWD DSR 2023-24 I.NO 13.32.2 Vol 2 p.no.122

code01 - Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 500x500 mm(PWD SR Vol.2 2023-24 it.no 9.17.1 p.no.61 )