Directorate Of Municipal Administration Tender

HPT004 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates [Raft] M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD Common S.R Vol-1, 2023-24 Rate Item No.2.4.4, P.No.16)

HPT005 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates [Raft] M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD Common S.R Vol-1, 2023-24 Rate Item No.2.4.4, P.No.16)

HPT006 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M30 Design Mix Using 20 mm and down size graded crushed coarse aggregates RCC Wall(PWD Common S.R Vol-1, 2023-24 Rate Item No.2.5.3, P.No.16)

HPT007 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M30 Design Mix Using 20 mm and down size graded crushed coarse aggregates Beam(PWD Common S.R Vol-1, 2023-24 Rate Item No.2.5.3, P.No.16)

HPT008 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M30 Design Mix Using 20 mm and down size graded crushed coarse aggregates Slab(PWD Common S.R Vol-1, 2023-24 Rate Item No.2.5.3, P.No.16)

HPT009 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately) . M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. [Chejja](PWD Common S.R Vol-1, 2023-24 Rate Item No.2.5.2, P.No.16)

HPT010 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification and with a 10 years warranty on product and work from certified manufacturers as per the direction of the Engineer In charge. (PWD Common S.R Vol-2, 2023-24 Rate Item No.15.1, P.No.149)

HPT011 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. [Ceiling](PWD Common S.R Vol-2, 2023-24 Rate Item No.8.4.1, P.No.41)

HPT012 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.[Inside Walls](PWD Common S.R Vol-2, 2023-24 Rate Item No.8.2.1, P.No.41)

HPT013 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. [Outside Wall] (PWD Common S.R Vol-2, 2023-24 Rate Item No.8.3.1, P.No.41)

HPT014 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD Common S.R Vol-2, 2023-24 Rate Item No.11.34B, P.No.86)

HPT015 - Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including cost of materials, labour, usage charges of machinery complete as per specifications. (PWD Common S.R Vol-2, 2023-24 Rate Item No.11.31, P.No.86)

HPT016 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.(PWD Common S.R Vol-2, 2023-24 Rate Item No.11.5.1, P.No.183)

HPT017 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification, h) All other type of structures(PWD Common S.R Vol-1, 2023-24 Rate Item No.2.11h, P.No.18)

HPT018 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Inside and Ceiling)(PWD Common S.R Vol-2, 2023-24 Rate Item No.8.51, P.No.50)

HPT019 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications.(Inside and Ceiling)(PWD Common S.R Vol-2, 2023-24 Rate Item No.8.39, P.No.48)

HPT020 - Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge.(PWD Common S.R Vol-2, 2023-24 Rate Item No.8.55.2, P.No.51)

HPT021 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Outside wall)(PWD Common S.R Vol-2, 2023-24 Rate Item No.8.29, P.No.45)

HPT22 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common S.R Vol-2, 2023-24 Rate Item No.8.41, P.No.48)

HPT23 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labor, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD Common S.R Vol-2, 2023-24 Rate Item No.11.6.1, P.No.78)

HPT24 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.(PWD Common S.R Vol-2, 2023-24 Rate Item No.11.2, P.No.77)

HPT25 - Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials,conveying to work spot with all lead and lifts etc.complete. For double flanged CI pipes of 300mm dia.(PWD Common S.R Vol-5, 2023-24 Rate Item No.7.6.6, P.No.86)

HPT26 - Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments.(PWD Common S.R Vol-5, 2023-24 Rate Item No.13.47, P.No.158)

HPT028 - Guide pipe holder - MS

HPT029 - MS auto rail guide pipe-50mm minimum.

HPT030 - D.I Dismantling joint-150 mm dia

HPT031 - M.S Chain-8 mm thick

HPT032 - Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendments only. The stem sealing should be with toroidal sealing rings (minimum 2 " O " rings). Body and bonnet should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For PN-10: (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc. complete For sluice Valve of PN10.0 and 150mm

HPT033 - NON RETURN BALL VALVE: Supply and delviery at site brand new D.I Ball valve suitable for handling water containing fibrous materials and solids of 80mm a)150mm dia P.N. 1.0

HPT034 - Delivery pipes and specials:Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-7322:1985 with latest amendments and including perfect linking and welding of joints to correct position includng cost and conveyance of materials with all lead and lifts, cost all labour and giving satisfactory hydraulic test as per IS:3589:2001 with latest amendments for test pressure and working pressure both at factory and site etc. complete as per detailed specifications with inside lining two coat of food grade epoxy painting of approved make with Each coat of 250 micron thick (after dry) over one coat of food grade epoxy primer of approved make with minium of 50 micron thick (after dry) and outside 25mm thick coating in CM 1:3 by providing 50x50mm weld mesh including loading and unloading of the pipes for the following category to suit PSC / MS / CI / AC / DI / PVC pipes. The weight of MS shell only by considered before lining and coating for arriving at the rate. The thickness of plate will be specified by the engineer. (Contractor will make his own arrangements for procuring water for testing for: Note: 1) For small works where the C.M. lining is not practicable for inside surface of the pipe, food grade expoxy painting of two coat over one coat of epoxy primer may be proposed and got approved. 2) The above rates are applicable only for pipe works etc. complete Pipe bends,branches, tail pieces, reducers etc. for upto 500mm dia pipes(Vol.5, Page No: 71 Iteam No: 5.37.1)

HPT035 - PRESSURE GAUGE: Supply and delivery at site brand new 150mm dia Board approved make suitable dia sealed precision tube glycerine filled stainless steel pressure guage with stop cock, two way cock, nipple and required length of copper tube etc., complete suitable for counting onthe delivery of the above pump.

HPT037 - Transformer : Supply, erection, electrification and commissioning at site, brand new Board approved make or any other make to be approved by the Board Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 25 kVA, Aluminum Wdg, Star 2 (5 Star ) B. CABLE ENTRY TYPE (ESCOMs SR 2023-24 Vol No: 6, Page No: 7, Iteam No: 12.12 )

HPT038 - Load break switch for transformers(ESCOMs SR 2023-24 Vol No: 6, Page No: 17, Iteam No: 41.01 )

HPT039 - 8 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 (Refer Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)(ESCOMs SR 2023-24 Vol No: 6, Page No: 17, Iteam No: 41.01 )

HPT040 - Main side cable:- 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm)(ESCOMs SR 2023-24 Vol No: 6, Page No: 13, Iteam No: 32.11 )

HPT041 - Load side cable:- Supply and deliverty at site brand new Board approved make or any other make to be approved by the Board Aluminium satndard conductors PVC insutated, sheathed steel tape/wire armoured , PVC outer sheated 1.1 KV class UG Cable conforming to the lateat ISS 1554.3x 10 Sq mm(ESCOMs SR 2023-24 Vol No: 6, Page No: 13, Iteam No: 32.03 )

HPT042 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) 6 Sqmm, 2 Core, (24 GI Wire - 1.4 mm)(ESCOMs SR 2023-24 Vol No: 6, Page No: 13, Iteam No: 32.01 )

HPT043 - 11 KV HT XLPE CABLE: Supply and laying of new Board approved make or any other make to be approved by the Board 3 x 95 sqmm aluminium, earthed, round armoured XLPE HT cable for the purpose of connecting from pole structure to metering cubical and metering cubical and matering cubical to pole structure(ESCOMs SR 2023-24 Vol No: 6, Page No: 15, Iteam No: 36.01 )

HPT044 - Construction of platforms (1.5x1.5x1.2) mtr in size stone, for erection of 25 KVA transformer and LBS including all materials, labour.Excavation of (1.5x1.5x1) mt pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 1cm thick layers, well compacted curing etc., complete providing and construction of stone masonary 0.9m below ground level and 1.2m above ground level neatly hammer dressed in cement mortor 1:6 cutting complete providing pointing to stone masonary in cement morter 1:3 after racking joint and nisely lining curing etc., plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc., curing at every stages complete and with MS rail embeded on the top of the platform, hoisting the transformer for the erection on the above platform and erection of the transformer on the platform including the cost of all the materials required labour etc., complete with supply and spreading of 40 mm down size jelly all round the transformer substation including transporation and erection of transformer using crane or other means including cost of all materials and labour required for erection of the above with all lead and lift etc., complete

HPT045 - Erection of control panel, auxilary panel, carrier cabinet, marshalling bay kiosk etc., alignment and fixing properly to foundation base including movement from the point of unloading to the point of erection(KPTCL SCHEDULE OF RATES 2023-24 Page 120. Iteam No: 23.a )

HPT046 - Erection of pumpsets: Laying and jointing of pipes and specials, lowering of pumpset into the wetwell and jointing delivery pipes, guide rail system, MS chains and lowering into the wetwell upto the floor level. etc ., complete using bolts and nuts, packing, fixing clamps, providing pipe supports wherever necessary including cabling etc., complete. The pump should be provided with suitable foundations including cost of all materials etc., complete.

HPT047 - The works shall include digging of trenches size of 0.60 Mtrs. deep & 1.0 Mtrs. wide providing sand bedding to the cables laying the cable in trench providing cable marking bricks refilling, consolidation the soil etc., complete including the cost of all the materials required for laying the cable as per IE rules labour etc., complete. 3x 95 Sqmm 11 KV Class

HPT048 - The works shall include digging of trenches size of 0.60 Mtrs. deep & 1.0 Mtrs. wide providing sand bedding to the cables laying the cable in trench providing cable marking bricks refilling, consolidation the soil etc., complete including the cost of all the materials required for laying the cable as per IE rules labour etc., complete. 3.5 x 50 sqmm 1.1 kV class

HPT049 - GI Pipe B - Class as per IS-1239 100 mm (ESCOMs SR 2021-22 Vol.6, Page No 38 I no 48.08)

HPT050 - LAYING IN G.I PIPE: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 3x95 to 150 (ESCOMs SR 2023-24 Vol.6, Page No 52 I no 21.01)

HPT051 - LAYING IN G.I PIPE: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 3.5 x 50 sqmm 11 kV class (ESCOMs SR 2023-24 Vol.6, Page No 52 I no 21.01)

HPT052 - Laying of load side cable: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm a) 3x 10 Sq mm (ESCOMs SR 2023-24 Vol.6, Page No 52 I no 21.06)

HPT053 - Laying of load side cable: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm b) 3x 6 Sq mm (ESCOMs SR 2023-24 Vol.6, Page No 52 I no 21.06)

HPT054 - 2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 600 x 50 mm ( PWD Ele SR 2-23-24 Page No: 55 Iteam No: 12.59.4 )

HPT055 - EARTHING: Supplying fixing andwiring earth electrode for groundingof lifts, transformers, DGsetsetc. using 40mmdia2.9mm thick2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a C C chamber of 400x400x400mmwith a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. (PWD ELE SR 2023-24 Page No 54 I no 12.57)

HPT056 - Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay (non modular) bricks of class designation 3.5 (PWD SR 2023-24 Vol.2, Page No 125 I no 13.51)

HPT057 - GI/Copper strips for grounding connections, using necessary fixing materials as required (PWD ELE SR 2023-24 Page No 55 I no 12.58.5)

HPT058 - Laying and jointing of MS pipes and specials for suction & delivery connections of the pump using suitable size bolts, nuts, packing etc., complete including fixing foot valve, all types of valves, gauges, strainers, delivery & suction manifold. The work shall include providing pipe supports, thrusts block in CC 1:2:4 prop., wherever necessary upto the end of the delivery manIfold, using all the requied materials such as sand, cement jelly including making holes in sump, pump house for laying suction and devliery pipes, packing of holes with CC 1:2:4 etc., complete. (all lead and lift) the works also includes construction of necessary thrust blocks required for delivery manifold arrangement.

HPT059 - Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuction : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved, 1YearWarranty.with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall, labour, usage charges of machinery complete as per specifications. complete (PWD Ele SR 2023-24 Vol.6, Page No 73 I no 15.35)

HPT060 - Supplying of first aid box. Complete (PWD Ele SR 2023-24 Vol.6, Page No 93 I no 15.114)

HPT061 - Supplying of four bucket stand alongwith buckets. Complete (PWD Ele SR 2023-24 Vol.6, Page No 93 I no 15.111)

HPT062 - Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinerycomplete as per specifications.(PWD Ele SR 2023-24 Vol.6, Page No 93 I no 15.117)

HPT063 - Supplying of Hand gloves. Complete (PWD Ele SR 2023-24 Vol.6, Page No 93 I no 15.113)

HPT064 - Tool Kit: Supply and delivery at site best Taparia/or any other Board approved make and other reputed make tool sets for operation and maintenance of the above pumpsets comprising of the following.a) Double end spanner 1/4" to 1" 1 set b) Screw driver insulated 11" - 1 No c) Screw driver insulated 8" - 1 No d) Cutting puller insulated 8" - 1 No e) Hammer with handle 1 Kg - 1 No f) Pipe wrench 24" 1 No g) Pipe wrench 18" 1 No h) Pipe wrench 12" 1 No i) Hammer with handle 5Kgs 1 No j) Grease gun - 1 No k) Ring spanners 1/4" to 1" - 1 set l) Tongue tester-1No m) Multimeter-1No.( eletromechanical type) n) Megger-500v of MECO or any other approved make-1No.

HPT27 - PUMPSETS Supply and delivery at site brand new board approved makes non-clong sewage submersible pump coupled to Board approved makes squirrel cage induction motor of suitable 10HP 'F' class insulation capable of delivering the duty condition as specified. The pumpset should operate in full range of discharge and should have the following accessories specified in the following detailed specification. (Detail specification is attached in Bid document )

HPT36 - Control Panel Board for pumps +APFC panel Supply, delivery and commissing at site brand new board approved make or equivalent floor mounting, free standing, cubicle type control panel board unit suitable for operation on 3 phase 50 cycles 400/440 volts AC supply fitted with the following: 160 amps MCCB with fixed and moving contracts fitted with U/V release, shunt release and with suitable thermal release.- 1 No.32 amps TP MCCB with fixed and moving contracts fitted with U/V release, shunt release and with suitable thermal release.- 2 No. 32amps MCCB with fixed and moving contracts fitted with U/V release, shunt release and with suitable thermal release.- 3 Nos with interlock system. Phase indicating lamps with switches of L&T/ BCH/ GE make or any other make approved by the Board - 1 set. MS air insulated bus bar chamber with 4 Nos. 100 Amps. 5 MVA Air insulated bus bar made of high conductivity, high strength aluminium alloy complying with the requirements of grade E91, E of IS 5082, suitably braced with non-hygroscopic SMS supports. Provision shall be made in the bus bar chamber for one incoming and Six outgoing feeders. The bus bar chamber should be of adequate capacity to handle the incoming and out-going cable and for fixing the witchgears as per requirement-1No. Multi parameter such as current, kwhr, Voltage, KVA reading digital meter of prok devices or any other Board approved make - 5 Nos. Cable entries and terminals suitable for numbers, type and size of aluminium conductor power cables, etc 32 Amps DP load break heavy duty switch fuse unit with rewireable fuses in sheet metal enclosure conforming to the latest ISS 4064 for lighting circuit BCH / control switch gear make or any other make approved by Board- 1 Nos. 2 Nos of 3 element aux relay for alarm and trip indication of transformer. The following protections shall be provided in the panel for each pumpset ( pump monitor unit) Overload protection, Seal monitor relay for tripping the pumpset in case of failure of mechanical seal. Winding overheating protection for tripping the pumpsets in case of overheating of windings due to clogging of impeller or any other variation in voltage and frequency. Reverse rotation protection to cut off the supply in case of reverse rotation.The pumps shall be controlled by the automatic liquid level controller while the pumps run in auto mode. The electrodes shall be fixed in the wetwell and the connection from the electrode shall be made to the starter panel through the cable duct for stopping the pumpset automatically.Star delta Starter: - Supply and Delivery at site push button operated, fully automatic air break contactor operated star delta Starter with thermal over load relay and delay timer in sheet housing of Board approved make or aequivalent along with suitable capacity air break contractor with HRC fuse for make and break etc., complete for 10 HP- 3 nos (Minimum) NOTE: 1) The panel board shall be complete with all other required fittings and shall be fabricated using 2mm thick sheet steel and suitable size copper cable/copper wire painted with two coats of a highly corrosion resistant primer applied wet on wet and a finishing coat of synthetic enamel paint of the ash greay shade. 2) The internal wiring shall be done using adequate size insulated electrotinned copper strip or cable of 1.1 KV grade. 3) Manufacturers test certificate is to be furnished to E.E before dispatching the materials to the work site. If any discrepancies are noticed apart from tender specification, suitable action as per tender condition will be taken against the tenderer including black listing of the tenderer.4) The bus bar chamber should be adequate size to accomadate all incoming, outgoing cable and required switchgear. (Detail specification attached in Bid documnet)

HPT65 - Servicing and commissioning: The pumpsets along with all other elecrical equipments shall be serviced and commissioned in the presence of the Engineer-in-charge of work including trail running for a period of 90 days. The work shall include the following.Providing operating and maintenance manuals of the pumps and allied equipments to the operating personnel. Giving trail run of the pumpsets for a period of 90 days from the date of successful commissioning. The contractor should employ personnel to operate & maintain the pumpset and accessories during the trial run period and should train the Board/Municipal Staff to operate the pumpsets. NOTE: 1. The energy and sewage will be provided by the Board free of cost. 2. The pumpsets along with all the electrical equipments shall be commissioned only when the performance of switch gears, relays are wittnessed by the Executive Engineer in charge of the work and Asst. Executive Engineer of the Board.

HPT66 - For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring Clamps, B&N and all other accessories required. With CT Ratio 50/5 for 15/25 kVA DTC (ESCOMs SR 2023-24 Vol.6, Page No 28 I no 64.01)

HPT67 - Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.(PWD Ele SR 2023-24 Vol.6, Page No 19 I no 5.31)