Directorate Of Municipal Administration Tender

code04 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two coats on new work over an under coatof suitable shade with ordinary paint of approved brand and manufature after throughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per direction of Engineer-in-charge.PWD CSR 2023-24, I.NO.8.41 P.NO.48 VOLUME NO.2

code05 - Earth work excavation by manual means for drains canals waste weir draft approach channels key trenches foundation of Buildin and bridges and such simillar works in all kinds of soils as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools and other appurtenaces required to complete the work. PWD CSR 2023-24 I.NO.1.4.1 P.NO.5, VOLUME NO.1.

code06 - Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead & lifts cost of all materials of quality labour Usage charges of machineries curing and all the other appurtenances required to complete the work as per technical specifications. Mix1:3:6 Usin 40mm nominal size graded crushed coarse aggregates. PWD CSR 2023-24 I.NO.2.1.3 P.NO.15 VOLUME NO.1. M10 concrete.

code07 - Supplying fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping/welding joints tying with binding wire/soft annealed steel wire and other anclary operations complete as per drawing and technical specification. h.All other type of structures. PWD CSR 2023-24 I.NO.2.11h P.NO.18 VOLUME NO.1

code08 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works Sub structure works of bridges Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators providing weep holes wherever necesary including all lead and lifts cost of all materials of quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.PWD CSR2023-24 I.NO. 2.4.2 P.NO.16 VOLUME NO.1

code09 - Supply of Exhaust fans in Indira Canteen

code10 - Fixing of MS Menu Board of size 5feet 8feet 90kg each Board including Painting and Writing.

code11 - Fixing of MS Name Board of size 13Feet x 2Feet and 15 Feet Pole C or H Channel 140kgs including Painting and Writing.

code12 - Supply of LED floodlight luminaire with pressure dia cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 CCT 5500K IP 66 optical and electrical compartment and impact resistance of complete luminaire IK08. Power Factor 0.9 with mains Surge Protection Min 5KV along with Over voltage Overload short circuit miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598 LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 1301m/w nominal CRI 75. Luminaire manufacturer should have in house facility accredited by NABL CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree/Nichia/ Lumileds/Osram make LED Source LED Floodlight 150W Vol6 ELECTRICAL DSR. 2023-24 P No 46 I.No 11.9.4.

code13 - Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCBs single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.Vol-6 ELECTRICAL DSR. 2023-24 P No: 18 I No :5.19.2

code14 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts bolts and washers.Vol-6 ELECTRICAL DSR. 2023-24 P No:14 Item No :5.7.4

code15 - Supplying and fixing Microprocessor based Electronic timer (without contactor Din Mounting using necessary bolts nuts and washers etc) 3-120sec setting.Vol-6 ELECTRICAL DSR. 2023-24 P No 21I No 5.47

code16 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:1990g to GTP of GROUP-A 4C X 6Sq.mm. Vol-6 ELECTRICAL DSR. 2023-24 P No: 6 I No:2.5.23.

code17 - Concealed Conduit System Supplying 20/25/32 mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends metal/PVC junction boxes adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick. Vol-6 ELECTRICAL DSR. 2023-24 P No 2 Item No 1.2.2