Directorate Of Municipal Administration Tender

NO 4 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (KPWD SR 2023-24 Vol-1. Item no.2.2.1 of page no.15) Add 3% For form work

NO 5 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (KPWD SR 2023-24 Vol-1. Item no.2.2.1 of page no.15)

NO 6 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings (KPWD SR 2023-24 Vol-1. Item no.2.11a of page no.18)

NO 7 - Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards,Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for …….Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom …..mm, top….mm with 3mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.9 m - Top 70 mm and Bottom 155 mm dia (KPWD SR 2023-24 Vol-6. Item no.2.4.6 of page no.11)

NO 8 - Supply of LED Street light luminaire with pressure diecast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection molded polycarbonate material, delivering superior light output Rated lifeBurning Hrs50000hr@Lumen Maintenance of 70%, maximum light intensity should be between 60degrees to 70degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection-Min 5KV along with Over voltage / Overload, shortcircuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40 mm to 50mm. Universa lVoltage driver to operate wide voltage range from 100V to 270V 50/60 Hz application. Compliance to IS10322/IEC60598, LM79&LM 80 Adherence with RoHS. UL approved MCPCB. Top access streetlight with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with........W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008 . Housing with supplier word mark/names hall be Engraved/Embos sing on the diecast housing/Body part. Warranty of 2 Years against any manufacturing defect working understandard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. LED Streetlight 120 W (KPWD SR 2023-24 Vol-6. Item no.11.8.5 of page no.46)

NO 9 - Fabrication, Supplying, Erection, Testing and Commissioning of...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data . (KPWD SR KPTCL VOL-6 2023-24 Item no.4.5 of page no.13)

NO 10 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT greater than5500K, IP 66optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains,Surge protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 130lm/w,nominal CRI greater than 75. Luminaire manufacturer should have inhouse facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.LED Floodlight 120W (KPWD SR KPTCL VOL-6 2023-24 Item no.11.9.3 of page no.46)

NO 11 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., Double Arm Bracket with 1500 mm Standard 40/50 mm dia (KPWD SR KPTCL VOL-6 2023-24. Item no.4.6.5 of page no.13)

NO 12 - Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (KPWD SR KPTCL VOL-6 2023-24. Item no.13.5 of page no.56)

NO 13 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. (KPWD SR KPTCL VOL-6 2023-24 Item no.32.05 of page no.56)

NO 14 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable ,2.5 to 25 Sqmm (KPWD SR KPTCL VOL-6 2023-24 Item no.21.05 of page no.52)

NO 15 - 1.1 Open Conduit System Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs incase of RCC ceiling and RCC wall/stone structure or rawl plugs incase of brick wall sand cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. (KPWD SR KPTCL VOL-6 2023-24 Item no.1.1.3 of page no.52) 32 mm dia 2.5 mm thick

NO 16 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 (KPWD SR KPTCL VOL-6 2023-24 Vol-1. Item no.2.5.8 of page no.6) 3C x 2.5 mm2

NO 17 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 (KPWD SR KPTCL VOL-6 2023-24 Vol-1. Item no.2.5.8 of page no.6)3C x 4 mm2

NO 18 - Wiring for lighting/power circui tusing one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 (KPWD SR KPTCL VOL-6 2023-24 Item no.2.3.6 of page no.05) 10 mm2

NO 19 - 5.35 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5to32/63A three phase 4 wire whole current class-1 Accuracy Energy Meter. (KPWD SR KPTCL VOL-6 2023-24 Item no.5.35 of page no.19) Energy meter

NO 20 - Supply and Installation /Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Poly carbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gas ket on both lid and flap suitable to fix Single Phase/Three Phase Energy Meter insuitable base plate and having a provision for Fuse/ MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600 mm x 600 mm x 170 mm (KPWD SR KPTCL VOL-6 2023-24 Item no.5.44.4 of page no.21)

NO 21 - 5.41 Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. And M.S.Flat...... With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 40 x 40 x 6 mm (KPWD SR KPTCL VOL-6 2023-24 Item no.5.41.1 of page no.20)

NO 22 - 5.48 Supplying and fixing Microprocess or Based Astronomical timer Switch with using necessary bolts, nuts and washers. (KPWD SR KPTCL VOL-6 2023-24 Item no.5.48 of page no.21)

NO 23 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.. 5.14.5 65 A (KPWD SR KPTCL VOL-6 2023-24 Item no.5.14.5 of page no.16)

NO 24 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC-60898. 40A TPN (KPWD SR KPTCL VOL-6 2023-24 Item no.5.18.8 of page no.17)

NO 25 - Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers. 100A (KPWD SR KPTCL VOL-6 2023-24 Item no.5.7.4 of page no.17)

NO 26 - Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. (KPWD SR VOL-5 2023-24 Item no.13.39 of page no.157)

NO 27 - 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM (KPWD SR KPTCL VOL-6 2023-24 Item no.8.02 of page no.5)

NO 28 - GI Pipe B - Class as per IS-1239. I Pipe - 25 mm Dia (KPWD SR KPTCL VOL-6 2023-24 Item no.48.02 of page no.38)