Directorate Of Municipal Administration Tender

Addendum-I of vol 01, Sl no 03 of pg no 111 - Centering Work Centering, shuttering, formwork for foundation,sub structure of cross drainages. 5% of the finished concrete item rate ( Addendum-I of vol 01, Sl no 03 of pg no 111)

PWD SR 2023-24 Vol No.01 P.No.15 SI No. 2.1.6) - Concerete Providing and laying in position Reinforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) M20 design mix using 20mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24 Vol No.01 P.No.15 SI No. 2.1.6))

PWD Ele SR 2023-24 Page No.5 Item code 2.3.4 - Copper wire Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.3.4) 4 mm2 PWD Ele SR 2023-24 Page No.5 Item code 2.3.4

PWD Ele SR 2023-24 Page No.5 Item code 2.5.16 - Flexible Multicore Cable Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 2.5.16) 4C x 4 mm2 PWD Ele SR 2023-24 Page No.5 Item code 2.5.16

PWD Ele SR 2023-24 Page No.9 Item code 3.9 - Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. PWD Ele SR 2023-24 Page No.9 Item code 3.9

PWD Ele SR 2023-24 Page No.13 Item code 5.7.2 - Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32Amps PWD Ele SR 2023-24 Page No.13 Item code 5.7.2

PWD Ele SR 2023-24 Page No.14 Item code 5.13.2 - Contactor Switch Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 5.13.2) 40 Amps PWD Ele SR 2023-24 Page No.14 Item code 5.13.2

PWD Ele SR 2023-24 Page No.16 Item code 5.18.8 - MCB Switch Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5.18.8) 40A TPN PWD Ele SR 2023-24 Page No.16 Item code 5.18.8

PWD Ele SR 2023-24 Page No.20 Item code 5.47 - Timer Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. PWD Ele SR 2023-24 Page No.20 Item code 5.47

PWD Ele SR 2023-24 Page No.20 Item code 5.42.2 - MS Box Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements,with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 5.42.2) 16SWG PWD Ele SR 2023-24 Page No.20 Item code 5.42.2

PWD Ele SR 2023-24 Page No.2 Item code1.2.4 - PVC Pipe Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 1.2.4) 40 mm dia 2.5 mm thick PWD Ele SR 2023-24 Page No.2 Item code1.2.4

ESCOMs SR 2023-24 - UG Cable Sl No 32) 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 Material cost item no. 32.05) 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) ESCOMs SR 2023-24

ESCOMs SR 2023-24 Item code 21.05 - UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 21.05) 2.5 to 25 Sqmm ESCOMs SR 2023-24 Item code 21.05 (Labour Cost)

Sl No Item No 1.6.1. PWD Civil SR vol 1 page no 6 - Digging Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. 1.6.1) In all kinds of soils. Depth upto 1.50m Sl No Item No 1.6.1. PWD Civil SR vol 1 page no 6

ESCOMs SR 2023-24 - Earthing Sl No 32) Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified Material cost item no. ESCOMs SR 2023-24

ESCOMs SR 2023-24 - Earthing Sl No 1.6 ) Digging of Pit for providing GI Pipe type Earthing specified 1.6.1) Ordinary Soil Labour cost item no. 1.6.1 ESCOMs SR 2023-24

Approved Rate Item No 31 - Realeseing refixing commissioning testing of 16Mtrs long dip galvanised octogonal pole using suitable capacity crane including panel board wiring,transpoort,labour,etc and providing suitable sizegalvanized J bolts and all necessary items (excluding foundation)dismantling existing foundation etc coplete as directed by engineer incharge for 16mtrs octogonal pole Highmast along with fixtures arm and wiring (Approved Rate Item No 31

Approved Rates - Supplying and Fixing of 6mm steel rope