Directorate Of Municipal Administration Tender

004 - LT UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) ESCOMs SR 2023-24 Page No 349 Item No 32.07

005 - Laying of cable in Existing Trench/GI pipe/Stoneware/RCC Hume pipe using wooden/Aluminium Rollers as directed by department staff. 2.5 to 25Sqmm. ESCOMs SR 2023-24 Page No 388 Item No 21.05

006 - Earth work excavation For UG Cable In all kinds of soils Depth upto 1.50 m Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work PWD Civil SR Vol-1 Page No 6 Item No 1.17.1

007 - Pothead Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm ESCOMs SR 2023-24 Page No 351 Item No 35.01

008 - GI Pipe B - Class as per IS-1239 GI Pipe - 20 mm Dia BESCOM SR 2021-22 Page No 16 Item No 49.01

009 - HDPE PLB Pipe 40/33 mm ESCOMs SR 2023-24 Page No 366 Item No 66.05"

010 - MCB Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898 6-32 A DP PWD Ele SR 2-23-24 Page No. 17 IItem code 5.18.4

011 - MCB Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898 6-32 A SP PWD Ele SR 2-23-24 Page No. 17 IItem code 5.18.1

012 - Earth excavation Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. in all kinds of soil depth upto 1.5m (.PWD SR 2023-24 Vol No.01 Page No.5 SI No. 1.4.1)

013 - Base Concerete Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:4:8 (M5) using 40mm nominal size graded crushed coarse aggregate PWD SR 2023-24 Vol No.01 P.No.15 SI No. 2.1.2)

014 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. PWD SR 2023-24 Vol No.01 Page No.18 SI No. 2.11(H)

015 - Providing and laying in position Reniforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers,well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per techinical specification.(The cost of steel reniforcement & formwork shall be paid seperately) M20 design mix using 20MM nominal size graded crushed course aggregates. (PWD SR 2023-24 Vol No.01 Page No.16 Sl No.2.3.1) Dimension -0.47x0.47x1.50=0.33

016 - LED Flood lights 70 W Supply of LED luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with . W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above shouldbe given by LED manufacturer & Cree/Nichia/ LED Flood Lights 70 W PWD Ele SR 2-23-24 Page No 46 Item No 11.9.2

017 - Control Box Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300 mm x 300 mm x 214 mm PWD Ele SR 2-23-24 Page No 21 Item No 5.44.1

018 - Hylum Sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. Dimension 46x32=1472 PWD Ele SR 2-23-24 Page:9 Item no 3.9

019 - Fuse Supplying & fixing of Porcelain fuse channel withcut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A PWD Ele SR 2-23-24 Page No.14 Item code 5.7.3

020 - Wood Board Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs 10x 8 x 1.5 PWD Ele SR 2-23-24 Page No.14 Item code 5.6.2

021 - Fixing Charges Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. PWD Ele SR 2-23-24 Page No 56 Item No 13.5

022 - LED Flood lights 100 W Supply of LED luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with . W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above shouldbe given by LED manufacturer & Cree/Nichia/ LED Flood Lights 100 PWD Ele SR 2-23-24 Page No 46 Item No 11.9.2

023 - Octagonal Poles 3 Mtrs Fabricating, supplying and erection of . ms long hot dip GalvanizedOctagonal hot dip Pole with BSEN 10025 grade S 355 JO steel platefor shaft, IS 2062 for base plate with door opening arrangements,including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom . mm , top. mm with 3 mm thick, suitable base plate and 4Nos of . long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 3 m - Top 70 mm and Bottom 130 mm dia PWD Ele SR 2-23-24 Page No. 11 IItem code 4.2.1"

024 - LED Street lights 40 W Supply of LED luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with . W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above shouldbe given by LED manufacturer & Cree/Nichia/ LED Street Lights 40 W PWD Ele SR 2-23-24 Page No 46 Item No 11.9.2

025 - LT 2 Pin Cross Arm - GI ESCOMs SR 2023-24 [Pg.No:340 I.No:2.08]"

026 - Fixing of 2 Pin & 4 Pin cross arm with Insulator and Braces fixing ESCOMs SR 2023-24 [Pg.No: 381 I.No:5.01

027 - No. 8 Strain Insulator ESCOMs SR 2023-24 [Pg.No:2 I.No:6.07)]"

028 - Rabbit Conductor (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM ESCOMs SR 2023-24 [Pg.No:341 I.No:7.02)"

029 - Stringing of Conductor Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps. ESCOMs SR 2023-24 [Pg.No: 382 I.No:6.01"

030 - Guy Wire & GI Wire as per IS-2141 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM ESCOMs SR 2023-24 [Pg.No:341 I.No:8.01]"

031 - Guy Clamp - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) ESCOMs SR 2023-24 [Pg.No:341 I.No:5.09]"

032 - Turn Buckle (GI) (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) ESCOMs SR 2023-24 [Pg.No:341 I.No:5.11]"

033 - Anchor Rod using 12 mm rounds/Guy Rod - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) ESCOMs SR 2023-24 [Pg.No:341 I.No:5.12]"

034 - Digging of Pit for GUY SET ordinary soil ESCOMs SR 2023-24 Page No 380 . Item No 1.7.1"

035 - Bend Clamp Supplying and Fixing.mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. PWD Ele SR 2-23-24 Page No 56 Item No 13.2