Bhabha Atomic Research Centre Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Bhabha Atomic Research Centre - BARC Tender
Electrical Goods and Equipments
Electrical and Electronics
Eprocure
Opening Date2 Apr 2024
Closing Date21 May 2024
Tender Amount₹ 3,30,00,000
Costs
EMD
₹ 6,60,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BARC_802757_1Bid Award Id
ViewTender No
BARC/SMFC/2022/FMF/EL/001Tender Authority
Bhabha Atomic Research Centre ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Main Lighting Emergency Distribution Panel
--Incomer - 2 No's of Electrically Interlocked 4-Pole, 630A, 25kA, MCCBs with LSIG Protection
--Outgoings -2 No's 200A MCCB, 2 No's 100A MCCB, 5 No's 63 Amps MCCB's - All MCCB's are 25kA, LSIG Protection
-- All MCCb's Shall be Icu=100%of Ics
1
-
-
Installation of Item No-1.03 Main Lighting Emergency Distribution Panel
1
-
-
Local Lighting Distribution Panel of Type-1
--Incomer - 1 No's of 4-Pole, 160A, 25kA, MCCB with LSIG Protection
--Outgoings - 1 No's of 100A MCCB, 5 No's of 63 Amps MCCB's - All MCCB's are 25kA, LSIG Protection -- All MCCb's Shall be Icu=100%of Ics
3
-
-
Installation of Item No -1.05 Local Lighting Distribution Panel of Type-1
3
-
-
Multi Area Lighting Distribution Panel of Type-2
--Incomer - 1 No's of 4-Pole, 200A, 25kA, MCCB with LSIG Protection
--Outgoings -2 No's of 100 Amps MCCB's, 10 No's of 63 Amps MCCB's - All MCCB's are 25kA, LSIG Protection -- All MCCb's Shall be Icu=100%of Ics
1
-
-
Installation of Item No -1.07 Multi Area Lighting Distribution Panel of Type-2
1
-
-
Multi Area Emergency Lighting Distribution Panel Type2
--Incomer - 1 No's of 4-Pole, 200 A, 25kA, MCCB with LSIG Protection
--Outgoings - 2 No's of 100 Amps MCCB's, 10 No's of 63 Amps MCCB's - All MCCB's are 25kA, LSIG Protection -- All MCCb's Shall be Icu=100%of Ics
1
-
-
Installation of Item No -1.09Multi Area Emergency Lighting Distribution Panel Type2
1
-
-
UPS Distribution Panel
Design, Fabrication, supply, installation, testing & commissioning of single front, Self Standing, Compartmentalised, Non-Draw out Distribution Panels as per IS 8623/IEC 60439 With Form-3b Separation, Fabricated out of 2 mm thick CRCA sheet having Colour coded and insulated Busbar as per Technical specifications and approved GA Drawing. -- All Panels shall have Digital MFM for all Incomers
-- Analaog Voltmeter and ammeter for Incomers along with MFM
-- Outgoings Shall have Digital meter
-- All incoming and outgoing breakers shall have ON/OFF/Trip Indication
Refer Technical Specifications for Complete Details
-
-
-
Mains UPS Distribution Panel
--Incomer - 1 No's of 4-Pole, 250A, 25kA, MCCB with LSIG Protection
--Outgoings - 2 No's of 160 Amps MCCB's, 7 No's of 63 Amps MCCB's- All MCCB's are 25kA, LSIG Protection
-- All MCCb's Shall be Icu=100%of Ics
1
-
-
Installation of Item No -2.01 Mains UPS Distribution Panel
1
-
-
Multi Area UPS Distribution Panel
--Incomer - 1 No's of 4-Pole, 160A, 25kA, MCCB with LSIG Protection
--Outgoings - 2 No's of 100 Amps MCCB's, 10 No's of 63 Amps MCCB's - All MCCB's are 25kA, LSIG Protection
-- All MCCb's Shall be Icu=100%of Ics
1
-
-
Installation of Item No -2.03-Multi Area UPS Distribution Panel
1
-
-
Lighting and Socket Distribution Boards Supply , installation , Testing and commissioning of 415V / 230V , 50 Hz TPN Seven segment wall mounting/Surface Mounting type MCB distribution boards made out of 14 G CRCA sheet with complete internal wiring and ferruling and all required accessories to complete the work as per standard engineering practice
--Chipping of wall/Concrete for fixing DB along with encloser, Disposal of wall material, Neat finishing, painting same as existing wall with all required civil works shall be carried out at no extra cost
--Shall be of IP 43 protection and as per IEC 61439-3 --Separate compartment for incomer, sub incomer and outgoing devices
--100 A Copper Bus bar for each phase with neutral bar, earth bar and cable ties -- Fully insulated bus bar and shrouded Neutral Bars
Technical Specifications - As per meioned in Chapter -3
-
-
-
Seven Segment TPN IP-43 8 Way Distribution Board consisting --63/100 A 4-Pole DX3 MCB- 1 No's - as incomer
--2 Pole, 32/40 A, 100mA RCBO - 3 No's - as sub incomer
--16/20A SP MCB Outgoings - 24 No's - outgoings
15
-
-
Installation of Item No -3.01- Seven Segment TPN IP-43 8 Way Distribution Board
15
-
-
Seven Segment TPN IP-43 12 Way Distribution Board consisting )
--63/100 A 4-Pole DX3 MCB- 1 No's - as incomer
--2 Pole, 32/40/63 A, 100/300mA RCBO - 3 No's - as sub incomer
--16/20A SP MCB Outgoings - 36 No's - as outgoings
8
-
-
Installation of Item No -3.03 - Seven Segment TPN IP-43 12 Way Distribution Board
8
-
-
Enclosures for DB's Supply of MS box made out of 16 SWG to be embedded in the wall and by mounting above DB's with two sections of which one with 63A/ 100A MCCB with R/Y/B Indicating lamps, and other section with above DB's similar to tender drawing for all necessary fixing and mounting arrangements with approved colour shade for EB DB's, Emergency DB's and UPS DB's
-
-
-
Metal Enclosure suitable for 8 way Seven segment above DB with 63/100A MCCB Similar to uploaded drawing
15
-
-
Installation of Item No -4.01- Metal Enclosure suitable for 8 way Seven segment above DB
15
-
-
Metal Enclosure suitable for 12 way Seven segment above DB with 63/100A MCCB Similar to uploaded drawing
8
-
-
Installation of Item No -4.03- Metal Enclosure suitable for 12 way Seven segment above DB
8
-
-
MCB Control DB's For Control of Highbay and other Lights
-
-
-
Supply 8 Module Power Distribution board with IP - 40 having Transparent Crystal clear Door with 16/20A DP MCB's - 8 No's Suitable for Surface or Flush mounting including all required accessories and required civil work
15
-
-
Installation of Item No -5.01 - 8 Module Power Distribution board with IP - 40
15
-
-
Supply Installation of 16 Module Power Distribution board with IP - 40 having Transparent Crystal clear Door with 16/20A DP MCB's - 8 No's Suitable for Surface or Flush mounting including all required accessories and required civil work
15
-
-
Installation of Item No -5.03 -16 Module Power Distribution board with IP - 40
15
-
-
Supply installation of 8 Module Weather proof Power Distribution board with IP - 65 having Transparent Crystal clear Door with Suitable MCB's including all required accessories and required civil work similar
15
-
-
Installation of Item No -5.05 - 8 Module Power Distribution board with IP - 40
15
-
-
Illumination System
-- All Lights shall be of 4 Years On Site Warranty from the date of handing over. Warranty Certificate Shall be provided and issued by OEM
-- However, Contractor shall replace or repair within defect liability/Warranty Period within the allotted time
-- Illumination design with suitable model numbers of lights from BOQ shall be designed by OEM representative of lights/ Vetted by OEM representative
-- Illumination drawing shall be submitted, wherever changes required as per directions of EIC shall be incorporated
-- Suitable area of functionality operational area, IP rating shall be satisfied while designing, supply and installation of lights
--Ladder, Tools etc wherever required shall be included in contractor scope for carrying out works
-- Necessary Civil works i.e cutting and neat finishing of false ceiling etc
-- LED shall produce Glare & Flicker free illumination with appropriate Surge devises, IP rating, Diffuser in order to ful fill the working environment.
-- Lights shall be supplied with hanging GI rods, and other required accessories etc at no extra cost
-- All Lights shall be of same make and shall be manufactured by same supplier for easy functional requirement unless approved by EIC
-
-
-
High Efficient High Bay Light LED Fittings (Height Up to 14 Meters)
-
-
-
Supply of 200 Watts LED IP65 in High Bay areas (Up to 14 Meters Height) with robust housing design, with modular lens Optics for optimized Lighting distribution, High efficiency driver circuit to deliver 150 Lumens/Watt operational efficiency having Flicker free illumination suitable for adverse industrial environments including GI hanging rods up to 3 meters length, screws, bolts and all required accessories for fixing of the Fixture
-- Lights shall have Minium 4kV inbuild surge protection and 10kV external Surge protection
-- Efficiency shall be of minimum 150 lumens/Watt
-- Installation of Height of Lights is up to 14 Meters
-- Spare Drivers 5% of Total Quantity Shall be Supplied shall be provided at quoted rate
-- Illumination design for each building shall be submitted
150
-
-
Installation of Item No -6.011 - 200 Watts LED IP65 in High Bay areas (Up to 14 Meters Height)
150
-
-
Explosion Proof Fittings in High Bay or Battery Areas
-
-
-
Supply of 60W Explosion proof LED of well glass in die cast Al housing with heat resistant toughened glass suitable for Gas/Vapor/flammable areas classified group of IIA & IIB and Zone 1 & 2 with IP65 protection including hanging rods up to 3 meters length, screws, bolts and all required accessories for fixing of the Fixture and LED
-- Installation of Height of Lights is up to 14 Meters
-- Minimum 100 Lumens / watt
20
-
-
Installation of Item No 6.021 - 60W Explosion proof LED
20
-
-
Supply of certified 2 X 18W LED flameproof batten with Twin LED tube suitable for Gas/Vapor group of IIA & IIB and Zone 1 & 2 with IP65 Protection including hanging rods up to 3 meters length, screws, bolts and all required accessories for fixing of the Fixture
-- Installation of Height of Lights is up to 14 Meters
-- Minimum 100 Lumens / watt
--Quoted rate shall include 3 No's of suitable spare drivers suitable for the supplied LED's
20
-
-
Installation of Item No -6.023 - 20W LED flameproof
20
-
-
Medium High Bay LED Fittings (Height Up to 10 Meters)
-
-
-
Supply of 80W LED for Medium Bay with IP65 protection delivering Minimum 130 Lumens/Watt a with Symmetric illumination with up to 4 meters down rods for efficient illumination as per site condition as instructed EIC with screws, bolts and all required accessories for fixing of the Fixture
-- Minimum 4kV Inbuilt surge protection and Suitable external surge protection as applicable
-- Installation of Height of Lights is up to 10 Meters
--Minimum 130 Lumens/Watt efficacy
--Quoted rate shall include 5 No's of suitable spare drivers suitable for the supplied LED's
65
-
-
Installation of Item No -6.031 - 80W LED for Medium Bay with IP65
65
-
-
Suspended Type Fittings (Up to Height of 10 Meters)
-
-
-
Supply of 80W LED for Medium Bay with IP65 protection delivering Minimum 130 Lumens/Watt a with Symmetric illumination with up to 4 meters down rods for efficient illumination as per site condition as instructed EIC with screws, bolts and all required accessories for fixing of the Fixture
-- Minimum 4kV Inbuilt surge protection and Suitable external surge protection as applicable
-- Installation of Height of Lights is up to 10 Meters
--Minimum 130 Lumens/Watt efficacy
--Quoted rate shall include 5 No's of suitable spare drivers suitable for the supplied LED's
40
-
-
Installation of Item No -6.041 - Suspended type 40W LED
40
-
-
Indoor Lights
-
-
-
Supply of Minimum 36 W LED Recess Mounting type Slim LED Suitable to fit in recess mounting false ceiling 2 X 2 ft, modern look for office areas , Deep drawn CRCA housing , Designed with low glare and comfortable experience through its classic design & glare free soft illumination. With all necessary Civil/Electrical works as approved by EIC
--Minimum 36W LED with minimum 100 Lumens / watt
--Quoted rate shall include 10 No's of suitable spare drivers suitable for the supplied LED's
150
-
-
Installation of Item No -6.051 - 36 W LED Recess Mounting type Slim LED
150
-
-
Supply of Minimum 36 W LED Surface/Wall mounted type LED Batten/Square Light suitable for Indoor Applications with flicker free illumination and high efficiency driver with bolts, nuts, clips, clamps and all required mounting arrangement accessories --LED shall be of minimum 100 Lumens / watt
--Quoted rate shall include 10 No's of suitable spare drivers suitable for the supplied LED's
100
-
-
Installation of Item No -6.053 - 36 W LED Surface/Wall mounted type LED
100
-
-
Supply of Minimum 20 W LED Surface/Wall mounted type LED Batten/Square suitable for Indoor Applications with flicker free illumination and high efficiency driver with bolts, nuts, clips, clamps and all required mounting arrangement accessories
--LED shall be of minimum 100 Lumens / watt
-- Quoted rate shall include 10 No's of suitable spare drivers suitable for the supplied LED's
100
-
-
Installation of Item No -6.055 - 20 W LED Surface/Wall mounted type LED
100
-
-
Supply of Minimum 18 W LED Recess/Surface Mounting Decorative type Slim LED with all necessary accessories. Fitting shall be similar to Philips SM251C LED20S- 6500 PSU WH or equivalent as approved by EIC
--Minimum 36W LED with minimum 100 Lumens / watt
Quoted rate shall include 7 No's of suitable spare drivers suitable for the supplied LED's
70
-
-
Installation of Item No -6.058 - 18 W LED Recess/Surface Mounting Decorative type Slim LED
70
-
-
Supply, of Minimum 12 W LED Recess/Surface Mounting Decorative type Slim LED with all necessary accessories.
--Minimum 12 W LED with minimum 100 Lumens / watt
--3 No's of spare drivers shall be supplied and Quoted rate shall include them
30
-
-
Installation of Item No -6.059 12 W LED Recess/Surface Mounting Decorative type Slim LED
30
-
-
Supply of Recessed mounted type 5 Watts spot lamps of approved temperature range suitable for conference room as per directions of EIC
50
-
-
Installation of Item No -6.061 - 5 Watts spot lamps
50
-
-
Indoor Clean Room Lighting
-
-
-
Supply of Minimum 36 W LED 2 X 2 Recess Mounting type Slim LED with IP54, white powder coated CRCA Housing designed for sensitive areas / labs with all necessary Civil/Electrical works as approved by EIC
--Minimum 36W LED with minimum 100 Lumens / watt
--LED shall produce Glare & Flicker free illumination
50
-
-
Installation of Item No -6.071 - 36 W LED 2 X 2 Recess Mounting type Slim LED
50
-
-
OUTDOOR Type Lights
-
-
-
Supply of Minimum 36 W LED IP65 Surface/Wall mounted/Suspended type LED Batten Light with flicker free illumination PC Diffuser, weatherproof LED batten Luminaire with minimum 100Lm/w efficacy ,Equipped with 4kv inbuilt surge protection, Durable industrial lighting solution luminaire with integrated LED channel with bolts, nuts, clips, clamps and all required mounting arrangement accessories as per directions of EIC
40
-
-
Installation of Item No -6.081 - 36 W LED IP65 Surface/Wall mounted/Suspended type LED
40
-
-
OUTDOOR Type Lights - Area Lighting
-
-
-
Supply of Minimum 200 W LED for outdoor area lighting height of approximately 14 Meters height, Floodlight luminaire with polycarbonate optics pressure diecast housing, IP 66 ingress protection, minimum 100 lm/watt efficacy, 4 kV inbuilt and 10 kV external surge protection with clips, clamps and all other necessary fixing accessories as instructed by EIC along with all necessary minor civil/Electrical works as per directions of EIC
-- 2 No's of Spare drivers shall be provided at no extra cost
20
-
-
Installation of Item No -6.091 - 200 W LED for outdoor area lighting
20
-
-
Supply of Minimum 70 W LED suitable for outdoor area lighting / Floodlight luminaire with polycarbonate optics, pressure die-cast housing along with IP66 ingress protection, 4kV inbuilt surge protection on existing Building at a height of approximately 10 Meters height with clips, clamps and all other necessary fixing accessories as instructed by EIC along with all necessary minor civil/Electrical works --LED shall be minimum of IP66 with 3 No's of Spare drivers
20
-
-
Installation of Item No -6.093 - 70 W LED suitable for outdoor area lighting
20
-
-
EMERGENCY EXIT LAMPS
-
-
-
Supply of 2 -sided FIRE Emergency Exist Boards with Illumination EXIT Signage in Red/Approved Colour with suitable in built battery to run on 230V AC Single phase supply with backup of 2 Hr on full charge with suitable hanging chain and all other required accessories
30
-
-
Installation of Item No -6.11 - FIRE Emergency Exist Boards
30
-
-
Conduiting Part- Supply and installation of GI Conduit Pipe hot-dip galvanised straight blister free Pipes in standard lengths of 3/3.75 meters, threaded at both ends with Junction Boxes of 3 way/4 way with GI couplers, bends, screws, clips, clamps and other required accessories as per requirement of site and as instructed by EIC
-- Chipping/ cutting of wall installation of conduit and final finish of civil works including paint with neat finish shall be carried out at no extra cost wherever it is applicable
-- Installation shall be of along the wall, cable trays, ground, Perlin up to 14 Meters height
-- Conduits shall be cut, threatened from 3 Meters standard length as per requirement of site
-- Wastages shall be included in quoted rate, No extra payment will be made
-- All accessories clips, clamps, screws etc shall be included in quoted rate
-- Conduits shall have smooth galvanized process fabrication
-- Junction Boxes installed in Outdoor Areas Shall have IP-55 protection
-- All conduits shall be of same make unless approved by EIC for functional requirement.
-
-
-
20 MM, 16 SWG, GI Conduit
5000
-
-
Installation of Item No -7.01 - 20 MM, 16 SWG, GI Conduit
5000
-
-
25 MM, 16 SWG, GI Conduit
5000
-
-
Installation of Item No -7.03 - 25 MM, 16 SWG, GI Conduit
5000
-
-
40 MM, 14 SWG, GI Conduit
500
-
-
Installation of Item No -7.05 - 40 MM, 14 SWG, GI Conduit
500
-
-
Supply of 25/40mm PVC Casing and capping or pipe suitable for electrical wiring along the wall surface with all necessary fixing arrangements
200
-
-
Installation of Item No -7.07 - 25/40mm PVC Casing and capping
200
-
-
Wiring Part: Supply and pulling of 1100V grade PVC insulated FRLSH compounded multistrand flexible High grade copper conductor of class-5 as per IS 8130/2013 and latest amendments single core industrial wires as per IS 694 : 2010 and latest modifications
--Insulation as per TYPE-D as per IS 5831/1984 and latest modifications as applicable
--Necessary test certificates for FRLS properties as per IS standard shall be submitted, EIC may instruct for testing of any part/lot of the wires if required. The contractor shall make necessary arrangements for testing of the same at no extra cost. contractor shall consider the necessary requirements before submission of bid.
-- OEM of wire manufacturing shall have in house testing facilities, relevant certificates as required Instructed by EIC shall be given
-- Wires Colours Phase R/Y/B/, Neutral-Black, Green-Earth as per standards shall be followed for balanced load.
-- All wires shall be terminated at MCB/Sockets/Switchboard etc properly with necessary lugs by crimping only as per industrial practice unless Instructed by EIC Contractor shall quote accordingly no extra payments will be made
--NO wastage of wires will be paid, wire shall have ISI marked as applicable
-- Each colour shall be supplied in bundles of 90/180 Meters or above (Measurement as actuals). -- No joints shall be allowed except as instructed by EIC and Jointing at T junctions to be done with proper terminal connectors
-- No Wastage of wires will be paid so quoted rates shall be inclusive of wastage
-- Pulling of wires shall be carried out only after smoothing of GI pipe/Trays Etc
-- Up to 10-12 No's of Wires shall be pulled as per directions of EIC In each Conduit
-- All wires shall be of same make
-
-
-
2 Runs of 1.5 Sqmm (R/Y/B for Phase + Black For Neutral) and 1 Run of 1.5 Green Wire for Earthing --1 RMT of measurement Shall Consists of Phase wire, Neutral wire and earth wire each of one meter length i.e total 3 meters.
10000
-
-
Installation of Item No -8.01 - 2 Runs of 1.5 Sqmm (R/Y/B for Phase + Black For Neutral) and 1 Run of 1.5 Green Wire for Earthing
10000
-
-
2 Runs of 2.5 Sqmm (R/Y/B for Phase + Black For Neutral) and 1 Run of 1.5 Green Wire for Earthing
--1 RMT of measurement Shall Consists of Phase wire, Neutral wire and earth wire each of one meter length i.e total 3 meters.
10000
-
-
Installation of Item No -8.03 - 2 Runs of 2.5 Sqmm (R/Y/B for Phase + Black For Neutral) and 1 Run of 1.5 Green Wire for Earthing
10000
-
-
2 Runs of 4 Sqmm ( R/Y/B for Phase + Black for Neutral ) and 1 Run of 2.5 Green wire for Earthing --1 RMT of measurement Shall Consists of Phase wire, Neutral wire and earth wire each of one meter length i.e total 3 meters.
4000
-
-
Installation of Item No -8.05- 2 Runs of 4 Sqmm ( R/Y/B for Phase + Black for Neutral ) and 1 Run of 2.5 Green wire for Earthing
4000
-
-
1.1kV LT Power Cables
Supply & laying (all modes-inside Industrial Buildings) of 1.1 KV grade L.T AL/ Copper Power Cables as per technical specifications & approved data sheets and of following sizes including required dressing hardware's .Cables to be laid in ground trench , the excavation work will be included in civil works for outdoor cable laying. All cable shall be of same make.
-- Cable shall be as per IS:7098 (part-1)-1988 and latest amendments, H4 grade Class-2 aluminium conductor as per IS 8130/2013, Insulation as per IS – 7098 (Pt-1)/88 Latest.
--Necessary test certificates as per IS standard shall be submitted, EIC may instruct for testing of any part/lot of the wires if required. The contractor shall make necessary arrangements for testing of the same at no extra cost. contractor shall consider the necessary requirements before submission of bid.
-- OEM of cable shall have in house testing facilities, relevant certificates.
-- Refer technical specifications for all details
-
-
-
4 Cx 16 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
500
-
-
Installation of Item No -9.01 - 4 Cx 16 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Al uminium
500
-
-
4 Cx 25 Sq.mm, Armoured 1.1 kV grade XLPE FRLS,Aluminium
500
-
-
Installation of Item No -9.03 - 4 Cx 25 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Al uminium
500
-
-
3.5 Cx 50 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
500
-
-
Installation of Item No -9.05 - 3.5 Cx 50 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Al uminium
500
-
-
3.5 Cx 95 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
500
-
-
Installation of Item No 9.07 - 3.5 Cx 95 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Al uminium
500
-
-
3.5C X 240 Sqmm, Armoured 1.1 kV grade XLPE FRLS, Aluminium (Including cable joint of 3M or Raychem as applicable)
1000
-
-
Installation of Item No -9.09 - 3.5 Cx 240 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Al uminium
1000
-
-
1.1kV LT Cable Termination - Terminations for cables above including supply of Single/Double compression type Glands, lugs, Termination materials as per requirement as per relevant IS/IEC standards
-
-
-
4 Cx 16 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
50
-
-
Installation of Item No -10.01 - 4 Cx 16 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
50
-
-
4 Cx 25 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
50
-
-
Installation of Item No -10.03- 4 Cx 50 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
50
-
-
4 Cx 50 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
50
-
-
Installation of Item No -10.05 - 3.5 Cx 50 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
50
-
-
4 Cx 95 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
50
-
-
Installation of Item No -10.07 - 3.5 Cx 95 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
50
-
-
4 Cx 185 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Aluminium
20
-
-
Installation of Item No -10.09 - 3.5 Cx 185 Sq.mm, Armoured 1.1 kV grade XLPE FRLS, Al uminium
20
-
-
Switches Sockets: Supply and Fixing of concealed /surface mounted Modular type polycarbonate covers/Plate/GI box/Socket/Suitable Switch with suitable earthing screws, Mounting and all other required accessories as per specifications and approved GA drawings -- All sockets/switches, plates shall be of modern design, applicable IP rating , necessary strength as per relevant IS/IEC standards -- All sockets/switches/plates/frame/GI box etc shall be of same make in order to ensure the maximum functionality unless approved by EIC
--Necessary Test certificate shall be submitted as per directions of EIC
-- Colours/design/model shall be as per directions of EIC for functional suitability and maximum life
-- All equipment shall be supplied with required necessary accessories
-
-
-
Supply of 2 Modular Plate + Frame+ White/Graphite Polycarbonate cover with Suitable Metal Flush Box
70
-
-
Installation of Item no. 11.01- 2 Modular Plate + Frame+ White/Graphite Polycarbonate cover with Suitable Metal Flush Box
70
-
-
Supply of 4 Modular Plate + Frame+ White/Graphite Polycarbonate cover with Suitable Metal Flush Box
70
-
-
Installation of Item No -11.03 - 4 Modular Plate + Frame+ White/Graphite
70
-
-
Supply of 6 Modular Plate + Frame+ White/Graphite Polycarbonate cover with Suitable Metal Flush Box
50
-
-
Installation of Item No -11.05 - 6 Modular Plate + Frame+ White/Graphite
50
-
-
Supply of 8 Modular Plate + Frame+ White/Graphite Polycarbonate cover with Suitable GI Box
40
-
-
Installation of Item No -11.07 - 8 Modular Plate + Frame+ White/Graphite
40
-
-
Supply of 12 ( 6 X 2) Modular Plate + Frame+ White/Graphite Polycarbonate cover with Suitable GI/Metal Flush Box
50
-
-
Installation of Item No -11.09 - 12 Modular Plate + Frame+ White/Graphite
50
-
-
Supply of 1 Module Modular Switch White/Graphite
400
-
-
Installation of Item No -11.12 - 1 Module Modular Switch White/Graphite
400
-
-
Supply of 1 Module Modular 2 way Switch White/Graphite
30
-
-
Installation of Item No -11.14 - 1 Module Modular 2 way Switch
30
-
-
Supply of 1 Module Modular Dummy Plate White/Graphite to suitable for above
400
-
-
Installation of Item No -11.16 - 1 Module Modular Dummy Plate
400
-
-
Supply of 6A or 16 A 5 Pin Socket of 2 Module with safety Shutter As per approved GA drawing suitable for above Legrand 5736 71
200
-
-
Installation of Item No -11.18 - 6A or 16 A 5 Pin Socket
200
-
-
Supply of 16 A Switch with ON/OFF with Indicator suitable for above - 5725 63
50
-
-
Installation of Item No -11.2 - 16 A Switch with ON/OFF
50
-
-
Supply of Metal Plug Socket DB with Neutral Links for A/C devices as per IEC 61439-3 Suitable for Flush/Surface Mounting with 20A TP (3P + E ) MCB including socket,MCB and plug with all necessary fixing and other accessories
30
-
-
Installation of Item No -11.22 - Metal Plug Socket DB with Neutral Links
30
-
-
Earthing / Lighting Part
-
-
-
MAINTENANCE FREE EARTHING SYSTEM
Supply,installation,testing & commissioning of 3.0Mts X15mm dia (10' X 5/8'') molecular bonded copper rod configured for TRIPOLAR type earthing system with 3 bags of Ground Enhancing Material, earth rod clamp, Earth pit chamber made out of brick masonary with a 25mm dia PVC conduit for earth wire entry and covered with GI lid cover of size 450 X 450 mm. The system shall confirm with IS- 3043 and IEC-62561-7. Recommended make: ERICO or equivalent make. - 150mm dia bore well digging suitable in Hard rock area.
- Providing & making concrete chamber (1:2:4) of size 600 x 600 x 600 mm (inside dimension) with
10 mm thick MS hinged cover mounted - Chemical mixed compound in order to produce low earthpit values (5 ohm) as per IS 3043
- Finishing with civil work , painting and numbering as per Directions of EIC
-- Installation of earth rods including making pit/drilling suitable size bore holes in normal soil/hard rock as per manufacturer's recommendations & design.
-- Exothermic welding of joints between earth electrode & GI / tinned Cu strip and between GI / tinned Cu strips, used for interconnection of earth electrodes.
15
-
-
Installation of Item No -12.01 - MAINTENANCE FREE EARTHING SYSTEM
15
-
-
Supply Installation in all modes Ground/Trays/ Cable trench/ Surface etc 25X 3 Copper Strip for earthing connections etc as per directions of EIC
- Including Suitable Green/Black Colour Sleeve
- Copper Clips, Clamps and other required connectors as per site condition
-- Necessary Test certificate shall be submitted wherever required as instructed by EIC
300
-
-
Installation of Item No -12.03- in all modes Ground/Trays/ Cable trench/ Surface etc 25X 3 Copper Strip
300
-
-
Supply in all modes Ground/Trays/ Cable trench/ Surface etc 14 SWG Copper Wire for earthing connections etc as per directions of EIC
- Including Suitable Green/Black Colour Sleeve wherever required
- Copper Clips, Clamps and other required connectors as per site condition
-- Necessary Test certificate shall be submitted wherever required as instructed by EIC
2000
-
-
Installation of Item No -12.05 - in all modes Ground/Trays/ Cable trench/ Surface etc 14 SWG Copper Wire
2000
-
-
Cable Trays: Supply & erection (In cable trench, Along Surface, wall, etc) of the following sizes ladder type cable tray made of 16SWG Gi sheets and finished with two coats of good quality weather proof epoxy paint. The rate shall include all accessories (like bends, tees etc) as required. Necessary supports. brackets, angle iron, suspension are to be included in this item.
-
-
-
450 X 50 X 2.5 mm wide Cable Tray
300
-
-
Installation of Item No -13.01 - 450 X 50 X 2.5 mm wide Cable Tray
300
-
-
300 X 50 X 2.5 mm wide
300
-
-
Installation of Item No -13.03 - 300 X 50 X 2.5 mm wide Cable Tray
300
-
-
150 X 50 X 2.5 mm wide
300
-
-
Installation of Item No -13.05 - 150 X 50 X 2.5 mm wide Cable Tray
300
-
-
50 X 50 X 2.5 mm wide Ladder/Perforated
300
-
-
Installation of Item No -13.07 - 50 X 50 X 2.5 mm wide Cable Tray
300
-
-
MS Item For Panel Support
-
-
-
Supply , Fabrication and installation of MS items like ISMC-100/ISA - 50/ 5 mm Chequered plate, panel supports . The fabricate items shall have one coat of red oxide primer and two coats of enamel paints as approved by Engineer in charge- MS Items shall be of SAIL/ TATA make
3000
-
-
Installation of Item No -14.01 - MS items
3000
-
-
Cable Trench and related work Earth work
-
-
-
Construction of cable trench in ground including hard rock area, work includes excavation in all type of soil at 1000mm depth, 500 mm width, applying of 50mm sand layer at top and bottom of cable and placing of brick by all sides and top of cable.
800
-
-
Installation of Item No -15.01 - Construction of cable trench
800
-
-
Air conditioning Units
-
-
-
Supply of 2 Ton 5 Star (as per BEE-2022 or latest) High Energy efficient DC Inverter type Copper coil air conditioners with suitable voltage stabilizer with all required fixing accessories including ODU stand etc as required
-- Average length of copper pipes and cable between indoor and outdoor to be considered approximately 10 Meters -- Height of fixing of ODU is up to 14 meters with all safety tools
-- necessary ladder/Mobile crane shall be considered
-- Air conditioner system shall have 5 years OEM manufacturing onsite warranty including PCB, 10 Years compressor warranty from the date of installation
-- Necessary warranty certificate shall be submitted
20
-
-
Installation of Item No -16.01 - Air conditioning Units
20
-
-
Miscellaneous items:
-
-
-
Supply of Rubber mats of 1.1 KV grade 2 Mtrs x 1 Mtrs and of sufficient thickness (2.0mm) confirming to IS:15652, made of Dielectric “Elastomer” which possess elastic properties and may be natural or synthetic in nature. Typically a combination of rubber & Synthetic Polymers. The same should be antiskid
15
-
-
Supply and Fixing of 1200 Mm Sweep Ceiling Mounted 320rpm Fan including remote with down rods, fixing arrangements, modular 1 Module speed controller with all fixing and necessary accessories
20
-
-
Installation of Item No -17.02 - 1200 Mm Sweep Ceiling Mounted 320rpm Fan
20
-
-
Supply of 400 Mm Sweep Wall Mounted/ Self Standing Fans with remote Equivalent with Suitable Speed controller
30
-
-
Installation of Item No -17.04 - 400 Mm Sweep Wall Mounted/ Self Standing Fans
30
-
-
Supply of 300mm Sweep Exhaust Fans,1400 rpm noise free operation for Washrooms with metal blades and bird mesh with all suitable accessories
30
-
-
Installation of Item No -17.06 - 300mm Sweep Exhaust Fans
30
-
-
Supply and Fixing of A3 Size 200GSM Paper Glossy Print colour SLD with Fully laminated as per directions of EIC
10
-
-
Supply and fixing of High quality colour printout A0 Size SLD's with metal on a suitable board as per Directions of EIC
5
-
-
Supply and fixing of A4 Size High Quality Electrical Danger Boards/ Authorized Personnel Sticker etc as per Directions of EIC as per relevant standards
30
-
-
Supply Installation of fire retardant paint for cables at terminations , in cable trays, race ways, wall etc as per directions of EIC
50
-
-
Installation of Item No -17.11 - Fire Retardant Paint
50
-
-
Supply of Digital timer circuit with suitable inbuilt battery/Contactor including all required accessories, suitable for various applications as required as per directions of EIC
10
-
-
Installation of Item No -17.13 - Digital Timer Circuit
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements