State Building Construction Corporation Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_JSBCC_96136_1Tender No
NIQ. No-07/2024-25Tender Authority
State Building Construction Corporation Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing and fixing SS sliding tower bolt with required fastners (Screws) complete:
-
-
-
250x10 mm
-
-
-
600 mm
-
-
-
Providing and fixing SS handles "D" type with required fastners (Screws) complete:
-
-
-
250x19 mm (Pipe dia)
-
-
-
200x19 mm (Pipe dia)
-
-
-
Providing and fixing SS hanging floor door stopper with necessary screws etc.complete: 150 mm Rubber Stopper
-
-
-
Providing and fixing SS door latch with necessary screws etc. complete. 250x12 mm
-
-
-
Providing and fixing SS sliding baby latch with required fastners (Screws) complete:
-
-
-
100 x 10 mm
-
-
-
Providing & Fixing Wall mounted door Buffer
-
-
-
Providing & Fixing dormakaba floor spring BTS 75V EN 1-4 with std. spindle and cover plate. The floor spring with backcheck and adjustable closing speed from 175°. . With 90°. hold open. As per EN 1154. (not suitable for fire doors) Finish: Satin stainless steel. Application - Aluminum Doors
-
-
-
Providing & Fixing dormakaba rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Silver finish. As per EN 1154.
-
-
-
Providing & Fixing dormakaba rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver finish. As per EN 1154.
-
-
-
Providing & Fixing dormakaba Pure Lever handle 8100 lever with roses, 7122 WC Indicator and spindle 8mm x 8mm x 110mm in satin stainless steel. Complete set including the fixing accessories for 50 mm thick door.
-
-
-
Providing & Fixing Mortice dead lock 388a with 55mm backset, 20mm square forend prepared for europrofile cylinder including strike plate. deadbolt, Forend Material: SS 316. as per EN 12209, CE Marked, Fire Rated, Grade 3 Robust, Durability - 200,000 Cycles, Grade 6 High-Security Deadbolt with Anti-Saw Pins,8mm Square hole Clamp Follower, Corrosive resistance - Very High
-
-
-
Providing & Fixing dormakaba 4014 Wall mounted door stop with coat hook in SSS finish
-
-
-
Providing & Fixing dormakaba pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
-
-
-
Providing & Fixing TGDI D type Offset Pull Handle 350 x 25 mm, CTC - 350 mm, D - 25 mm,Back to back fixing with suitable fixing accessories , SS 304, Finish : Satin
-
-
-
Providing & Fixing Male /Female sign plate 3020-M /3030-F , for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black
-
-
-
Providing & Fixing dormakaba lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin chrome
-
-
-
Providing & Fixing dormakaba 4012 wall mounted door stop dome with 60mm length with fixing accessories
-
-
-
Providing & Fixing dormakaba floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
-
-
-
Providing & Fixing dormakaba DEC 6Plus 6 Pin Euro Profile Single Cylinder with Single side key operation Under Master Key system.Total Length = 43mm.Change Keys - 3 Nos.Finish - Nickel Plated
-
-
-
Providing & Fixing dormakaba lever action flush bolt with 19mm projecting bolt L=300 mm for wood door in satin chrome
-
-
-
Providing & Fixing Disable sign plate 3040-D for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black
-
-
-
Providing & Fixing dormakaba Pure Lever handle 8100 lever with roses, escutcheons prepared for Euro profile cylinder and spindle 8mm x 8mm x 110mm in satin stainless steel. Complete set including the fixing accessories for 50 mm thick door.
-
-
-
Supply and placing of stainless steel centrifugal air curtain having following specification. The product should be made up stainless steel 304Grade having 4 Blowers(in M. Steel), 2 Motors operating on three phase , Power =2200 Watt having RPM (Max/Min = 2700) and having CFM of 3680. Overall Dimension of 1523X345X351(mm) with Noise level 68 db. Air Curtain should be provided with velocity control switch and a Door sensor. The product should carry manufacturers warranty of one year from the Date of Supply alongwith Tin Sheet as cover, Bracked and screws
*Variations acceptable in parameters above - 5-10%
The Product should be complete in all aspect as per Engineer incharge instructions.
-
-
-
Supplying of Queue Manager madeup up of stainless steel material.The pole measures 1130 mm in height and 350 mm in diameter at the base. The belt measures 2 metres in length between the poles and weighs 9.1 kg with the queue manager.Blue, Black, and Red are the available belt colours.
-
-
-
Supply of Fully Automated Shoe Cover Dispenser Machine with Automatic Shoe Counting Function. The machine needs a voltage of 220/50Hz and a rated power of 20W. The machine should have the following dimensions: 750 x 300 x 630 mm.The product will have a one-year general warranty.
-
-
-
Supplying of INTERCONNECTED ROLLING - ALUMINIUM MATTING -5 YEARS WARRANTYProfile Colors : Silver or Black, Position of Matting : Inside/Foyer Area, Material : Aluminium Profile with Carpet, Area : High Traffic,Trolley Crossings : Heavy Trolley, Maintenance : Easy to clean, Application : Recessed / Surface, Warranty : 36 Months
-
-
-
Supply of Powder Coated Galvanized Steel Fire hose cabinet doors. Door frames to be Single rebate profile of 90 x 45 mm manufactured from 1.6mm galvanized steel sheet, profile to have bending radius of 1.4 mm supplied in assembled form ready to install at site. Door Shutter manufactured from single sheet thickness 1.6mm galvanized steel sheet complete with 4mm thick glass with rubber gasket and beading with screw, locking arrangements with Allen key, hinges and flush handle etc. The door frames and shutter should be finished with powder coating with 50- 80micron in desired shade as per direction of Engineer- incharge.
Door size: 1500mm x 750mm
-
-
-
Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction : 35 mm thick including Stainless Steel butt hinges with necessary screws.
-
-
-
P/F lead lined door 1200mm x 2100mm , the frame for the door is second class teak wood (ivory cost ) properly seasoned wood of section 100*60mm with a coat of viper make primer and paint. 44mm thick doors shutter are made out of 34mm thick BWP grade board door shutter sandwiching 2mm thick lead sheet of radiation control, 6 mm thick commercial ply and 1mm thick laminate in shuede finish on both the faces of shutter lead lining to be done for frame and shutter both with 2mm thick lead sheet of radiation control. The frames are fitted in masonary opening with the help of anchor fastners of Hilti/Ficher make of size 10*100/10*120mm. 8mm thick Lead and lined glass Hardware for the doors are inclusive and includes - stainless steel SS ball bearing hinges 100*75*3 mm of beaker of equivalent make, Dead lock with both side key opration of Becker or equivalent make back to back D handels of size 19*300 mm stainless steel grade of Becker or equivalent make, Face mounted Tower bolt 300 mm long of Becker or equivalent make, face mounted door closer of Becker or equivalent make, all work is being carried out under the direction of Engineer in charge.
-
-
-
roviding and fixing of Clean room doors - 1200mm x 2100mm of Navair/Godrej/Kutty make. The Door is made out of GPSP sheet of Zinc coating not less than 90 GSM. The frame is made out of 1.2 mm thick GPSP sheet having section 10057 mm. Doors shutters are made out of 0.8 mm thick GPSP sheet and having insulation of resin bonded honey comb craft paper. All frames and shutters are finished with Polyester coating of thickness 60-80 micron. The rates also includes the provision of Door hardware like Stainless steel SS ball bearing hinges 100753 mm of Becker of equivalent make, Dead lock with both side key operation of Becker or equivalent make, Back to Back D handles of size 19300 mm stainless steel grade of Becker or equivalent make, concealed flush bolt 300 mm long of Becker or equivalent make, Face mounted door closer of Becker or equivalent make,Both side flush type Vision panel Fitted with 5 mm thick Toughened glass with 20 mm black border, P type seal on perimeter of frame, Door bottom Drop seal of Enviro/Raven make all work is being carried out under the directions of engineer incharge.
-
-
-
Providing & Fixing flexible Conductive PVC sheet flooring of Armstrong/ Forbo/ Polyflor having a total thickness of 2mm and weight of 3kg/m².Colors and pattern detail shall be dispersed throughout the thickness of the wear layer. It shall conform to Group P of Wear Resistance as per EN 649, Flammability of class Bfl-s1 as per EN 13501-1, Slip resistance as per DIN 51130 group of R9 , having REACH Registration No, 1907/2006 contains no substance mentioned in SVHC list. Impact sound reduction of 3 dB as per ISO 140-8, Residual indentation of 0.05 mm as per EN 433, Color fastness rating ≥6 as per ISO 105-B02, Vertical resistance(R1) less than 1 x 10⁶- 1x 10⁸Ω as per EN 1081, and surface resistance less than 1 x 10⁶- 1x 10⁸ Electrical insulation to ground greater than 50 kΩ as per VDE 0100, Static electrical charge of ≤2.0kV as per EN 1815, Thermal resistance of 0.04m²K/W as per EN 12667, Thermal conductivity of 0.25 W/mK. Equivalent to Armstrong PASTELL. Installation:It is important to ensure the sub floor on which the sheet is being laid is smooth, flat & hard & free from moisture, grease, etc. In case of uneven sub floor the
-
-
-
The moisture level present in the subfloor should be less than 8% before installation of the floor. The sheet should be laid using adhesive recommended by company.Each row of tiles/strip of floor covering must be linked crosswise with a continuous copper strip. Individual rows/strips must be at least 3 m² in size and linked to the rest of the area with a copper tape. In rooms of up to 40 m², connection points for equipotential bonding should be provided in at least one point in the room.
-
-
-
Supply and installation of PVC sheet flooring 2 metre wide and overall thickness of 2mm of Armstrong/ Forbo/ Polyflor. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVCwith DIAMOND 10 technology, Plasticizers without DOP, Urethane, color pigments and filler calendered to form a sheet. Product shall conform to group "T" wear resistance as per EN 649, Flammability resistance of class Bfl-s1 as per EN13501-1, Dynamic coefficient of friction of class DS as per EN 13893, Impact sound reduction of 3dB as per ISO 10140, Slip Resistance of class R9 as per DIN 51130, Color fastness rating of ≥6 as per ISO 105-B02, total weight being 3.3 kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria,resistance to chemical, resistance to staining,suitability to castor chair.
-
-
-
Installation- It is important to ensure the subfloor on which the sheet is being laid is smooth, flat, hard and free from moisture, grease etc. In case of uneven subfloor the same should be levelled using self leveling compound which will charged extra. The moisture present in the subfloor should be less than 8% before installation of the floor. dhesive. The installation shall be undertaken as per manufacturers installation instructions.
-
-
-
Providing and laying of 2 - 3 mm average thick layer of cementations smoothening compound of UZIN NC 149 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer over and including a priming compound of UZIN PE 360 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer and installation team on concrete surface to provide a smooth & homogenous surface for laying of vinyl sheet flooring complete to the entire satisfaction of Engineer-in-charge.
-
-
-
Providing and injection chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, alongwith the external perimetre of building, expansion joints surrounding of pipes and conduite etc, complete (plinth area of the building at ground floor only shall be measured) Aldrin Embulsifiable concentrate (0.5%)
-
-
-
Extra for vaccum dewatering the concrete floors using TREMIX or equivalent over P.C.C layer i/c finishing the top surface to required level/ slope and grade with rough / polish finish using power trowels (both fan & disc) of standard make including curing, cutting of groove of grid size 4m x 4m with, mixing of nonMTR.allic hardening compound (3.0 Kg/SQM of Fosroc or approved make) ,cutting of VDF floor with Diamond Saw System (disposal of debris to be included in the quoted rate)as per specification etc. complete as per specification and drawing. (Maximum thickness of RCC flooring shall be of 150 mm) At all heights / depths and levels. Extra for filling grooves with polysulphide 6mm wide, 20mm deep.
-
-
-
P&F flexible PVC sheet wall cladding in 1.00 mm thickness in the size of 1.5 x20mtr with PUR treatment. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments and filler calendared to form a sheet. Colors shall be dispersed throughout the thickness of the wear layer. It should conform to Group M of Wear Resistance as per EN 660-2, Fire resistance of group 2 as per AS/NZS3837, Residual indentation of ≤0.10mm as per EN433, curling after exposure to moisture ≤8mm as per EN434, Seam strength of mean≥240N/50mm as per EN684. Equivalent to Armstrong Walldesign.
-
-
-
Providing and supplying Armstrong ‘Optra Acoustical Wall Panelling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size 2100x600 or 600x600 mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer .
-
-
-
Providing & Fixing of Linear Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, with resilient waterproof backing, anti allergic which is certified by British allergy foundation, with ten year replacement guarantee. The carpet should have permanent static control & should be fixed with powder coated aluminum angles as per detail. The work should be carried out by the authorized installer of the Company in India.
-
-
-
Basement waterproofing:(Treatment below Raft) 1) Clean all dirt, loose material and kept dry. In case of pot holes/cracks, the same shall be repaired with cement putty using Dr. Fixit Pidicrete URP. (Sand cement to be provided free of cost at site)
-
-
-
Below Raft - Supplying and installing 1.5 mm composite thick self adhesive fully bonded HDPE membrane, Dr.Fixit Prebond having tensile strength of 25 MPa as per ASTM D 412, elongation of 500% as per ASTM D 412, puncture resistance of 1000 N as per ASTM E 154, UV resistant up to 45 days and conforming requirements of UG waterproofing structures, as per manufacturer's recommendation. The membrane should be minimum 2.4mx20m to reduce the number of joints, minimum 75mm factory made selvedges and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self adhesive polymer layer. The waterproofing system should be applied by the manufacturer approved partner applicator with 10 years of warranty against leakage. Products made in India will be given preference.All vertical surfaces will be fixed using prefixed gaskets etc. complete as per manufactures specification.
-
-
-
Supply & installation of 180 gsm geotextile as a protection layer. Protecting the membrane with 50mm thick Screed (P.C.C)
-
-
-
Retaining Wall :- Providing and laying of minimum 1.5 mm thick SBS modified self adhesive waterproofing membrane topped with cross laminated HDPE valeron film, Dr. Fixit Samshield XL1500, having tensile strength of 3.5 N/mm2 and with minimum elongation (L/T) of 180% (as per ASTM D 882). The membrane shall have puncture resistance of 200 N (as per ASTM D 412 -06). The system includes base preparation of cleaning, brushing and removal of flacky materials, grouting the porous area with cementitious grout, proper coving between slab and wall junctions and priming the surface with cold applied bituminous primer, Dr. Fixit Torchshield primer (or equivalent), followed by installation of waterproofing membrane. The SBS membrane should be sealed properly at joints & maintaining 75 mm overlap between the membrane selvedge & 100 mm overlap on the end joints of the membrane over the surface etc. The waterproofing system should be applied by the manufacturer approved partner applicator with 10 years of warranty against leakage. Products made in India will be given preference.All vertical surfaces will be fixed using prefixed gaskets etc. complete as per manufactures specification.
-
-
-
a) Providing protection board of geodrain boad of 10mm thick fixed on to the membrane complete as per the specification and drawing. (In client's Scope)
-
-
-
Termination at vertical
3) Use a C- Shaped aluminium flashing strip or tuck it into a concrete wall of a groove of 12mmx12mm .T he aluminium flashing can be fitted to press the membrane into the groove and then be filled with a single component Dr. fixit PU sealant .
-
-
-
Providing & fixing Rockfone Stonewool Acotsical Ceiling PACIFIC High NRC (0.80), Fire Rating A1 (EN 13501-1), RH 100% (No visible deflection in high humidity), Superior Class Light Reflection, Sag Resistant 12mm thick Ceiling Tiles of size 600x600 A-Edge (Square) with AntiBacterial Properties & M1 Class Emission Certification made up with Natural Stone (Bassalt Rock) a complete Green Product & perfect suitable for any kind of False Ceiling application in builiding & costruction. The Visible side is a smooth white painted fleece, the Rear side: back fleece with complete
-
-
-
U Baffle open ceiling with fixed and demountable Torsion Spring. (Hunter Douglas/Armstrong/Knauf)
Supply & Installation of torsion spring U-Baffle Ceiling System in Wooden Finish color, comprising of baffle width of 50mm and height of 150mm manufactured out of 0.6mm thick Coil Coated Aluminium of alloy AA 3105 at a module of 250mm. The baffle shall be manufactured on high speed, high precision roll forming machine with ARKU SIX Hi configuration roller levelling process to ensure the flatness and to avoid the failure of metal at corners which may occur normally on press brake machine. The coil is coated on a continuous paint line double baked and shall be stove enamelled in a continuous coil coating process of the approved colour on the exposed side and the reverse side with polyester primer. The U Baffle ceiling panels shall be mounted on coil coated customised Hat type Aluminium carrier of size 60mm * 30mm * 0.9mm thk. The customised carrier shall be suitable for both torsion spring based & standard fixed Baffle panels. The carrier shall be suspended with M6 Threaded rod hangers spaced at 1200mm c/c. Maximum upto 20% of the Total ceiling area, based on client requirement, shall be demountable torsion spring-based panels. The length of the panel shall be upto 2400mm. Suspension System: As per manufacturer standard it is recommend to have minimum gap of 250mm between plenum and its baffle top surface height for easy engagement of spring.
-
-
-
Providing & Fixing laminated wooden false ceiling , made in 50x50mm Hard wood frame (Mirandi) center to center 600mm both ways, hang to ceiling with help of hanger support 'L' type G.I angle (25x25mm) and anchor bolt etc. over fixed 11mm thick ply board with 10x8mm deep groove finish with lacqure polish, 1.0 mm thick approved shade laminate to fixed on ply board, defects free bubbles free with help of adhesive. as per drawing and to the entire satisfaction of Engineer in charge. ( ply Boad & Laminate Make Green ply/Century /Merino or Equivalent ,Adhesive make Pidilite or equivalent)
-
-
-
Automated Glass door Supply and fixing of Automatic frameless sliding door and operator, modular design including internal cover with operator dimensions (H X T) not exceeding 120mm x 175mm and of length required to suit the opening size given below: Clear opening of size 2500mm X 2400mm: GEZE EC Drive, compact linear sliding door automatic, with self cleaning rollers, TUV type tested as per DIN 18650. In general, the sliding door consists of 16 bit Microprocessor Control unit, monitoring of closing force, automatic reverse on contact with obstruction, operator commissioning without any additional instrumentation and self-teaching. Operating Modes: Continuous open, automatic operation, closing time, night lock, multi-sensor detector(radar motion detector with direction detection and self-monitoring, (light barrier) for convenient safeguarding of the opening width),(Option: Electromagnetic locking, integrated in the drive unit, with manual emergency unlocking.) The operator will be provided with short circuit proof power supply unit 220 / 240 V, 50 / 60 hz (power point shall be made available at site by electrical contractor). Operator shall have opening speed adjustable from 10 to 60 cm / sec / leaf, closing speed adjustable from 10 to 55 cm / sec / leaf, adjustable creep speed 3 - 9 cm / sec / leaf and adjustable hold open time 0 - 180 seconds all confirming to manufacturers specification. Rate is not included for providing 12mm thick clear toughened glass sliding shutter as per design, handling, loading and unloading, installation, power required for erection, protecting the module and glass till handing over, testing, commissioning all necessary hardware’s and the module to be erected with the structural supports etc. complete and all as per manufacturers specifications as directed: ( 12mm thick toughened glass shutter shall be paid extra.) (Makes GEZE ,SIO, Dorma, or Equivalent)
-
-
-
Supply and Installation of Vertical Louvers, CS- 200 Vertical Fin system components has to be in Aluminum extrusion Alloy 6063-T5/T6/1100/3000 Series, with minimum thickness of the extruded minimum 1.5 mm, with Blades Multi tube tapered from 27” down to 10” projection, extruded aluminum rectangular tube design. Tubes shall be factory assembled to outriggers using stainless steel, type F, thread cutting screws through internal screw slots in blades. Welding is not acceptable. Blades to be mechanically secured to allow for replacement in case of damage. Fasteners to be hex head. All the fasteners used shall be of Stainless steel for the construction of the louvers and should be mechanically fastened. Louver must be factory fabricated and finish so that only assembly/ installation will be done at the site. Finish will as per the approved RAL color in Super durable Powder Coat System, Complying with AAMA-2604 standards. Finish thickness to be minimum 2 mils.
-
-
-
Providing and fixing ARCHETON terracotta facade of U-Value 0.8 & R value of 1.25 and dimension 304*594*18 mm with modules of 300*600 with Q3** resistance to impacts (classification as per French standards) with wind resistance to positive/ negative pressure 6500 / 4500 Pa, weight of 27.13 kg per m2 which conform to standard NF EN 539-2, water absorption to be between 8% - 10% conforming to EN ISO 10545-3 § 5.1.1, bending strength not to exceed 1400 Newton conforming to EN ISO 10545-4. Installation of terracotta panels to be done by securing to the vertical T-shaped aluminium profile using the fixing clips fastened with 2 self-tapping stainless steel screws. Vertical aluminium T-shaped profiles are to be pre-punched hole with vertical spacing of 25mm. The terracotta tile is to be well-supported on four points by the clips and on its two smaller sides by the rubber gasket so as to have a very good wind load resistance of more than 6500 PA positive wind load pressure and a negative wind load pressure of 4500 PA and flexural strength of 135 da N. The total thickness cladding system is not to be more than 110 mm. The quantity of products per sq.m are to be 5.56 tiles, with quantity of profiles per main course sq.m to be 1.67 lm/m2, with quantity of clips to be 11.11 nos. per sq.m . Scaffolding and electricity for fixing to be provided by GC Approved Makes – Hunter Douglas, Soladrilho
-
-
-
Providing and fixing of Glass Fiber Reinforced Concrete (GFRC) Column in approved size, pattern, Design, thickness and color. The Column should be made From 53 grade white Portland cement/ 43 grade OPC or PPC gray cement manufactured by J.K. Cement or equivalent having minimum compressive Strength of 40N/mSQM, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by Sant Gobain, Owens corning or equivalent, super plasticizers and polymers manufactured by BASF, Sika, MYK Schomburg or equivalent. The material casting should take place in Synthetic Rubber / FRP Mould manufactured by Reckli or equivalent. The Fixing of Column should be Dry Fixing i.e. to be done with Stainless Steel (SS-304)/ MS Frames, dash fasteners, Self-screw and pins. GFRC Column (35-40 mm thick) as per design with GFRC capitals. Note :- MS frame Structure for GFRC column to be provided as per design.
-
-
-
Providing and fixing in position about 50mm thick border and 35mm thick design Jali at all levels made from Glass fibre reinforced concrete (GRC) using white cement, Quartz Sand, AR Fibres, Water Plasticizers & pigments in approved shape, size and length as per the design and drawings and as per specifications, mix design and test results given below. The typical Screen should be of sizes as per the drawings. Fixing of GRC Jali shall be with help of S.S. Screws Fixtures, M.S Angle Cleats, Fissure Plug, and Dowel Pin proper alignment as per drawings (Shop drawings to be Submitted by the contractor before the work start). As per approved paint, shade & Finishing with GRC powder & filling the joints with Epoxy sealant neatly between GRC screen and primary structures. The Screen should be in absolute straight plumb line and length and joins between channels should be neatly filed to make seamless uniform surface across the entire elevation of the building without any visibility to joints. Any framework to be paid extra as per item.(GRC Screen)
-
-
-
Supplying, installation, testing & commissioning of MACHINE ROOM LESS 20 passenger lift /1360kg/1.25 m/s speed / 8 floor / 8 stops / stainless steel ( 1.5mm ) Car cabin, Differently Abled people friendly. Provisions of General CPWD specifications for lift works are to be followed.
Controller - Micro processer based AC variable voltage & variable frequency Control
Automatic rescue device complete with dry maintenance free batteries as required.
Operation - Microprocessor based Simplex Full Collective without attendant.
Power - 415 V ±10%, 3 Phase, 50 H
Car door - Power operated centre opening horizontal sliding stainless steel Scratch resistant Door operation - Full Height Infra-red cross-multi beam Landing doors - Centre opening, stainless steel scratch resistant at all floors. It must be fire-rated for minimum 1-Hrs and supplier must provide the certificate for the same along with material supply.
Car operating Panel / Landing operating panel - Only Emergency button Inside the Car
Hand rail - Shall be SS finish fixed above 900mm from the car-floor level on rear-wall or side wall.
Voice announcement system - In car to announce the position of the elevator in hoist way as the car passes or stop at a floor served by the elevator
Intercom system - 3-way intercom Clear Opening of Doors - 1000 X 2000 mm (Wide x Height). Makes - Johnson, Kone, TKE, Schindler
-
-
-
Supplying, installation, testing & commissioning of MACHINE ROOM LESS 26 passenger lift /1768 kg/1.25 m/s speed / 7 floor / 7 stops / stainless steel (1.5mm) Car cabin, Differently Abled people friendly. Provisions of General CPWD specifications for lift works are to be followed.
Controller - Micro processer based AC variable voltage & variable frequency Control
Automatic rescue device complete with dry maintenance free batteries as required.
Operation - Microprocessor based Simplex Full Collective without attendant.
Power - 415 V ±10%, 3 Phase, 50 H
Car door - Power operated centre opening horizontal sliding stainless steel Scratch resistant Door operation - Full Height Infra-red cross-multi beam Landing doors - Centre opening, stainless steel scratch resistant at all floors. It must be fire-rated for minimum 1-Hrs and supplier must provide the certificate for the same along with material supply.
Car operating Panel / Landing operating panel - Only Emergency button Inside the Car
Hand rail - Shall be SS finish fixed above 900mm from the car-floor level on rear-wall or side wall.
Voice announcement system - In car to announce the position of the elevator in hoist way as the car passes or stop at a floor served by the elevator
Intercom system - 3-way intercom Clear Opening of Doors - 1000 X 2000 mm (Wide x Height). Makes - Johnson, Kone, TKE, Schindler
-
-
-
Design, supply, installation, testing and commissioning of Heavy Duty Indoor type Escalator reversible type capable of operating safely & smoothly for a period of not less than 20 hours a day, seven days a week, at an operating speed of 0.5m/sec, with width not less than 1000 mtr between interior panels, with 4 Nos. flat steps at both ends, with inclination 30 degree, rise from floor to floor up to 6.0mtrs, with electric motor, control panel, latest safety devices, cable for connections including stainless steel cladding as required, for operations on 415 volts, 3phase, 50 HZ AC with auto start and stop etc. as per detailed technical specifications with approval of Employer/Engineer-in-charge including 2 years comprehensive warranty for the complete Escalator. Makes - Johnson, Kone, TKE, Schindler
-
-
-
Providing and fixing automatic bi-parting sliding doors with 12mm clear toughened glass for doors. Automatic sliding door operator - supply of automatic sliding door Set 1 operator as per approved dwg. Compliant with european standards and produced according to the guidelines for power-operated windows, doors and gates, BGR 232, the UVV and the VDE regulations. TÜV design tested, tested according to the low voltage guidelines, fulfils DIN 18650 standards Standards for Pedestrian Safety, TUV Design Tested for Durability of 1 Million Cycles. The track profile should be separate from the main profile for enabling reduction in vibration insulation. Operator length = 4150 mm, Maximum clear passage opening width = 2000 mm, clear passage height = 2500 mm, includes micro processor controlled drive unit, with self learning mechanism, program selector with knob, motion detector Nemo Motion + Nemo Dual ( Safety& Motion) Combo Pack. Silver (for Inside & Outside)*, mechanical components, toothed belt, cover profile, floor guide for frameless glass (02 nos), Five Position Program Switch with knob, safety device-light barrier (01 pair). EM Lock - Fail Safe, Body finish : standard silver anodised operator profil. UPS of 750 VA shall be provided by others, which will give power backup of 20 min. Only & if the duration of power cut to the operator is more than 30 min.,then separate arrangement needs to be done for the same as automatic operator requires uninterrupted stabilized power supply. The above work complete in all respect as per approved drawings and to the satisfaction of engineerin-charge / architect consultant.
-
-
-
Providing and fixing Rolling Shutter Industries make special for rolling shutter, made out of polycarbonate section made 304.8 X 98.3 X 5 mm, corner edge, with insert hollow 166 mm x 0.9 mm MS pipe in each section till the end opening, with nylon end lock at end both side for interlocking, special 35x35x5mm angle at bottom plate with bolt, 75 mm x 2.0 mm special guide channel, rolling shaft made out of (grade no-2 ) wire spring (make Jindal make or Usha Martin ), operation with mechanical device RAMA/Gandhi make gear box, Cast iron gear rolling shaft, with 22 mm solid rod system complete or auto operation RAMA- Jailong/Gandhi automatic motor system for rolling shutter, single phase, 230 V, input power from 320 (W) to 1768 (W) NM torque 225 to 1617, lifting force from 400 kg to 1500 kg, RPM- 4.2 TO 3.3, 50 Hz, manual chain in case of power failure and control switch.
-
-
-
Providing & fixing smoke seal at floor level comprising of 50mm thick Rock wool of density 48kg cum as manufactured by UP Twiga Fibre Glass limited or equivalent with one side tissue and the other side with aluminium foil fixed on to the aluminium frame by stainless steel screws including G.I. sheet powder coated or galvanized fixed between glass and insulation panel.
-
-
-
Providing Design, Detailed Engineering, Supply, Fabrication, Erection, Installation and placing in position of Architectural Membrane Primary MS Steel Structure Work. Using Min 210 MPa Yield Strength Mild Steel built up tubular trusses (Plates, CHS/ RHS/ SHS ERW M.S. tube as per Indian Standards and as per approved specifications Make ISI Marked with MTC Certificate.) including cutting, hoisting fixing in position. Such as Structure are welded and bolted including special shaped washers etc. complete. Hot Finished welded type tubes in Complete and direction of Engineer-In-Charge. MS ERW CHS Pipes as per specification under "IS 1239 (Part-1, 2004), YST 210"; SHS/RHS Pipes as per specification under "IS 4923 (2009), YST 210 MPa" and MS Plate as per specification under "IS 2062, YST 210 MPa". Steel Qty. as per Final Design & Drawing Approve.
Note : - Approximate Steel Consumption 3kg/ sqft.
Make APOLLO/JINDAL/BHUSHAN/TATA/SAIL/ISI Mark & Equivalent
-
-
-
Providing and Applying the complete structure to be Two Coat of Enamel Paint over one coat of Red Oxide primer in required DFT of (dense film thickness) for each coat in total DFT of 60 microns. The work is to be executed as per technical specification and direction of Engineer-In-Charge.(Make: - ASIAN/ MRF/ BERGER/ NEROLAC/ JOTUN & Equivalent).
-
-
-
Providing, fabricating, assembling and erection of TENSILE Membrane Fabric structure with TENSILE fabric having a minimum weight of 900g/sqm ,Tensile strength 4300/4200N/5cm ,tear strength 500/500N as per particular specification with a 10 years warranty etc. over steel frames with all fittings and fixtures such as Galvanized MS Membrane /End Plate, Shackles, Rigging Screws, Turnbuckles, swedge, fork, kedar rods & galvanized MS strands/cables with stainless steel end terminals complete by a specialized sub-contractor. Rate includes cost of fabric , shop drawings, patterning, forming, cutting, fabrication, hot weld stitch of fabric, , assembling and installation with GI cables, hardware ,Aluminum flat, EPDM gasket and required accessories wherever required complete including, tools and plants, etc. Required for all operations in all respect complete as per drawing, design, specifications and as directed by Engineer-in-charge.
NOTE: fabric area to be measured.
WARRANTY ON FABRIC 10 YEARS ON PRO-RATA BASIS
AS REQUIRED Providing & Supplying of GI Cable with MS End Terminals & MS Nut & washer, Diameter as per Design, Type of cable is 6x19 strands of required length of Grade1570 steel core as per specification under "IS 2266 (2002), with MS end terminals at both ends of required length as per approved drawings as Under Membrane Cables complete in all respect as per direction Of Engineer-In-Charge.
-
-
-
Supply and Installation of polycarbonate multi-layer, multi-cell connectible modular panel system, a complete assembly of co-extruded UV protected polycarbonate panels incorporated into a complete system. Standing seam polycarbonate panel shall be 25mm thick (Min.) in uniform colour with an integral truss bridge structure core. In a cross section, the core shall be constructed of six walls, five cells with vertical separator in between like truss bracing structure to provide better strength to the panel. Panels shall be fixed on MS supporting structure (will be paid Separately) with 3 numbers of self-drilling screws and trapezoidal SS fasteners ensure a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005. Panels junctions shall be covered with interlocking connectible connectors running lengthwise at both sides of the panel with grip-lock double tooth locking mechanism. The panels shall be solo opaque type in opaque and clear combination of louvers in single panel with seven layers to get required lux level with improved shading coefficient for Indian tropical condition and better lumen efficacy. Panels with more layers will be preferred for better insulation and improved shading coefficient. Panel shall have a minimum modular width of 1200 mm for minim junctions.U value shall not be more than 1.6 Watt/m2K as per EN ISO 1077-2:2018 and respective third-Party test certificate shall be produced before procurement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155.Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. Panel shall be with additional End cap/Aluminum U/F profile/ Glazing Bar (all aluminium shall be factory / mill finish) for ends as required. Panel shall be fixed over MS supporting structural (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory nominated applicators with supervision to complete the entire panel installation as per drawing and direction of the engineering in charge.
-
-
-
Providing and Fixing reception backdrop panneling 150mm thick size as per drawing , made in hard wood frame(mirandi wood) 50mm x 50mm thick & c/c 600mm maximun both ways joint rigidly horizontally & vertically with nails, screws etc. fixed to wall/ceiling & columns with wooden plugs. 11 mm thick MDF Board is to be fixed on top of frame with 10x8 mm deep grooves on both sides of the center panel. 11mm MDF Board is to finished with laminate on both side of approved design and all groves to be finished with laminate shade. Center panel is of 19mm MDF jali /Engg. stone cladding of aprooved design and of size: The visible part through MDF Jali is to be finished with lacqured glass of approved design. All work is to be carried out as per drawing and instructions of engineer in charge. ( MDF Board/ MDF Jali & Laminate Make Green ply/Century /Merino or Equivalent ), (Adhesive make Pidilite or equivalent)
-
-
-
Providing and fixing factory made 30MM (18MM Flutes + 12 MM Base) thick Homogeneous HDHMR pasted on a 12 MM thick HDHMR Plain Board with a second Generation alumnimum polymer based hybrid All surface sealant, pressed in Temperature & Pressure controlled press, Solid Dark Green Colour board Fluting Panel, with CNC (Computer Numeric Control) Routed of approved design (Rectangular or Arched or both) by Engineer-in-charge which are machine cut for Panelling/Partitioning and acoustic Purposes comprising of Wood Fibre/Wood chips & synthetic thermosetting resin, having a minimum density of 820 kg/cum and screw Withdrawal strength of 1500 N (Face), 1250 N (Edge), Modulus of Elasticity average, 3200N/mm2, Modulus of rupture average 3200N/mm2 with properties of being termite/borer proof, moisture/water Wall Paneling: Providing and fixing factory made 30MM (18MM Flutes + 12 MM Base) thick Homogeneous HDHMR pasted on a 12 MM thick HDHMR Plain Board with a second Generation alumnimum polymer based hybrid All surface sealant, pressed in Temperature & Pressure controlled press, Solid Dark Green Colour board Fluting Panel, with CNC (Computer Numeric Control) Routed of approved design (Rectangular or Arched or both) by Engineer-in-charge which are machine cut for Panelling/Partitioning and acoustic Purposes comprising of Wood Fibre/Wood chips & synthetic thermosetting resin, having a minimum density of 820 kg/cum and screw Withdrawal strength of 1500 N (Face), 1250 N (Edge), Modulus of Elasticity average, 3200N/mm2, Modulus of rupture average 3200N/mm2 with properties of being termite/borer proof, moisture/water proof and fixing on Alumnimum frame made of 50 X 50 X 1.5 MM Square Hollow Box section and screws etc., all complete as per direction of Engineer – in – charge. (Note; Alumnimum framework shall be paid separately). (Make Greenlam, Ecoste, Century, Merlin Ply-la)
-
-
-
Providing and Fixing reception backdrop panneling 150mm thick size as per drawing , made in hard wood frame(mirandi wood) 50mm x 50mm thick & c/c 600mm maximun both ways joint rigidly horizontally & vertically with nails, screws etc. fixed to wall/ceiling & columns with wooden plugs. 11 mm thick MDF Board is to be fixed on top of frame with 10x8 mm deep grooves on both sides of the center panel. 11mm MDF Board is to finished with 4mm veneer on both side of approved design and all groves to be finished with shade. Center panel is of Engg. stone cladding of aprooved design and of size: The visible part finish with melamine polish and mirror polish of approved design. All work is to be carried out as per drawing and instructions of engineer in charge. ( MDF Board/ MDF Jali & veneer Make Green ply/Century /Merino or Equivalent ), (Adhesive make Pidilite or equivalent)
-
-
-
Providing & Fixing wall planter base pots in high quality unbreakable plasic in stackable mechanism which allows cascading iriigation method. The cost includes instlattion of different plant species as per direction of engg-incharge or by architect. The whole integrated system shall include the installation of framework, plants, irrigation system, HDPE drip pipe, Lateral dipper, Filters , joints & Auotmation timer etc. Make Wonderwall, Four leaf, Bio Vertical
-
-
-
P/Fixing Wall paper as per approved brand and manufacture to give an even shade and color as approved by architect. & instructionof Engineer in charge. Makes - D Décor or equivalent
-
-
-
Providing and Fixing MDF Wall Panneling made in hard wood frame (mirandi) 35mm x 50mm thick c/c 600mm horizontally & vertically, fixed to wall/columns with wooden plugs,then 11 mm thick Medium Density Fiber Board fixed on top of frame with 10x8 mm deep Groove & same finished with 1.0 mm thick laminate of approved quality pasted with the help of adhesive with provision of pin up board for backlit , making of niche as /dwg fixed nails screws etc. All grooves to be finished with lacquer polish maching with laminate shade as per Technical specification, drawing and instructions of Engineer in charge. (MDF Board & Laminate Make Green ply/Century /Merino or Equivalent, Adhesive make Pidilite or equivalent)
-
-
-
Providing & Fixing Translucent Roller Blinds Over Window Opening With Arrangement Of Closing & Opening With G -String, Complete In All Respects As Per Design And Instruction Of Engineer In Charge. (Make Vista / Mac Or Equivalent,Fabric Model No. Equivalent To Echo (Vista) / Abstract /Silky/ Ribcord/Drizzle/Trans)
-
-
-
Providing and Fixing MDF Jali with frame of size as/drawing made in 19mm mdf board, to be cut in a disffernt shape and pattern as per design approved by architect & the same jali is to be finished with high gloss Duco paint (both sides)as/colour approved on mdf surface brushing the surface free from foreign matter, sand papering smooth, filling in all holes and applying surface and sealer for base preparation before coting selected color high gloss Duco complete as per specifications, and then fixed with in the existing mdf frame work with nails, screws etc.to entire satisfaction of Engg in charge/ Architect matching with veneer shade. All work is to be carried out as per drawing and instructions of engineer in charge.
-
-
-
ELECTRICAL WORK
-
-
-
Supply & Laying of following sizes of 1.1KV grade multistranded copper conductor PVC insulated cable including termination complete as required in existing cable tray.
-
-
-
1C x 35 sq.mm PVC Insulated cu wire including termination etc.
-
-
-
1C x 16 sq.mm PVC Insulated cu wire including termination etc.
-
-
-
11 KV H.T. CABLE:
-
-
-
Supplying of 11 KV grade aluminium conductor, cross linked polyethylene (XLPE) insulated individual core screened, flat steel/strip armoured PVC sheathed cable complete as required. 3C x 300 Sqmm, 11 KV XLPE
-
-
-
Supply & Laying of following sizes of 1.1KV grade Copper conductor XLPE insulated and FRLS PVC sheathed armoured control cable including termination conforming to relevant IS.
-
-
-
4 core, 2.5 sq.mm.
-
-
-
10 core, 2.5 sq.mm.
-
-
-
12 core, 2.5 sq.mm.
-
-
-
Supply, Installation, Testing & Commissioning of following End Feed Unit housing fabricated out of 14G CRCA powder coated (as approved) sheet steel for the Rising Mains fitted with following ACB. The End Feed Unit should complete with solid aluminium links of rated capacity of ACB to Rising Mains. The End Feed Unit should be complete with suitable size of glands plate for incoming cables. All MCCB / ACB shall have Ics value of 50 KA. Each end feed unit shall have a set of 3 nos. phase LED Type indicating lights with control fuses.
-
-
-
1000A TPN MDO ACB, 50 KA
-
-
-
Supply, erection, testing and commissioning of following sizes of TV splitter of aluminium die cast body in suitable size of G.I. Box. 4 way
-
-
-
Supply, erection, testing and commissioning of following co-axial cable in existing conduit. RG-11
-
-
-
Supply & installation of 32 Amp 3 phase, 415 volt, 50 Hz water tight (IP-55) socket outlet with interlocking switch complete with all fixing accessories.
-
-
-
Supply & installation of 32 Amp single phase 240 Volt, 50 Hz, water tight (IP-55) socket outlet with interlocking switch complete with all the fixing accessories as below.
-
-
-
Supply & fixing of following size (GP RACEWAY- Fabricated from GP Sheet) race ways for electrical & LV wiring including neoprene gasket in joints, cutting the floor & jaming the race way / hanging in ceiling, supporting arrangement as approved by consultant / architect with all necssary hard ware (including civil work) as per site requirement. The thickness of raceway & cover shall be as per technical specification.
-
-
-
100 mm wide x 40 mm deep.
-
-
-
150 mm wide x 40 mm deep.
-
-
-
200 mm wide x 40 mm deep.
-
-
-
250 mm wide x 40 mm deep.
-
-
-
300 mm wide x 40 mm deep.
-
-
-
Supply & fixing of following size of Raceway Junction Box made out of GP Sheet for electrical & LV wiring including, cutting the floor & jaming the junction box / hanging in ceiling, supporting arrangement as approved by consultant / architect with all necssary hard ware (including civil work).(Junction box to be provided as per drawing/ as per site requirement & as per specification). The thickness of junction box shall be a as per thechnical specification.
-
-
-
150 mm wide x 50 mm deep.
-
-
-
200 mm wide x 50 mm deep.
-
-
-
250 mm wide x 50 mm deep.
-
-
-
300 mm wide x 50 mm deep.
-
-
-
350 mm wide x 50 mm deep.
-
-
-
Supply, Installation, Testing & Commissioning of Earthing Junction Box size - 400mm x 300mm x 80mm made out of 16 SWG CRCA sheet with seven tank process & powder coating, earthing link (32mm x 6mm copper strip) front door with glass as complete as required.
-
-
-
Supply & Fixing of Rubber mat 1000 mm. Wide to withstand 1.1 KV dielectric strength as per latest IS 15652-2006.
-
-
-
Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd.
-
-
-
Supplying & Placing of First aid box as approved by St.John Ambulance Brigade /Indian Red Cross society conforming to IS : 2217 - 1963 etc as reqd.
-
-
-
Supplying & Installation of Shock treatment chart duly mounted on a wooden frame with glass on, as required in 2 languages (Hindi & English) etc. as reqd
-
-
-
Supply, installation, testing and commissioning of addressable monitor module complete as per specification.
-
-
-
Supply Installation, Testing & Commissioning of fire fighter main console at control room including power supply and accessories.
-
-
-
Supplying, installation, testing & commissioning of digital audio amplifier 480 Watt, supply complete as required.
-
-
-
DATA, TELEPHONE SYSTEM INCLUDING ACTIVE COMPONENTS
-
-
-
Supply, Installation, Testing & Commissioning of Patch Panel Cat 6 U/FTP 24 Port- Loaded as per technical specification.
-
-
-
Supply, Installation, Testing & Commissioning of Patch Panel Cat 6 U/FTP 48 Port- Loaded as per technical specification.
-
-
-
Supply, Installation, Testing & Commissioning of Patch Cord Cat 6 U/FTP 3 feet as per technical specification.
-
-
-
Supply, Installation, Testing & Commissioning of Patch Cord Cat 6 U/FTP 7 feet as per technical specification.
-
-
-
Supply, Installation, Testing, Commissioning of Cat 6, 10G, U/FTP, Information Outlet including G.I. Box and modular cover plate as per technical specification.
-
-
-
Supply , Installtion , Testing and comissioning of 15U wall mount rack with fans , 2 cable managers, satationary shelf , 2 Nos of hardware pkts as per technical specification.
-
-
-
Supply, Installation, Testing & Commissioning of Network Rack 42 U with below included: Network Rack 800W x 2000H x 800D, Top cover with 4 x cutout, 2 x cutout for cable entry. Bottom cover with 4 x cutout for cable entry. All cutouts blanked with Plastic caps. 2 pairs, 42 U 19" Profile Type angle,Front & etc. complete as per technical specification.
-
-
-
Supply, Installation, Testing & Commissioning of 24 port 10/100/1000Mbps, 4SFP module, L-2 Switch, POE as per technical specifications.
-
-
-
Supply, Installation, Testing & Commissioning of 48 port 10/100/1000Mbps, 4 SFP Module, L-2 Switch, POE as per technical specifications.
-
-
-
Supply, Installation, Testing & Commissioning of IP Based voice Communication System with 04 Port Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30 Ch) Circuit with CLIP Facility , 800 IP users License ,01 Nos. IP Operator Console, 30 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, - Redundant server in active-Active mode as per technical specification.
-
-
-
Supply, Installation, Testing & Commissioning of Type 1 IP Phone . Graphic LCD display with backlight 3 user accounts with multi-line appearance keys Local and company-wide phone directories.
-
-
-
Supply, Installation, Testing & Commissioning of Type Basic Phone account , Full duplex speaker phone, .
-
-
-
Supply, Installation, Testing & Commissioning of Core Switch 24 1Gb/10GBASE-T ports, 2 10Gb/40Gb QSFP+ ports, 4 10Gb/25Gb/40Gb/50Gb/100Gb capable QSFP28 ports, 2 populated power supplies slots, with suitabe fan module slots, supporting RIP, OSPF, VRRP L3 protocols from day one as per technical specification.
-
-
-
Supply, Installation, Testing & Commissioning of SFP+ 10GBASE-SR 10 Gigabit Ethernet Optics, 850 nm for up to 300 m,transmission on multimode fiber (MMF).
-
-
-
Supply, Installation, Testing & Commissioning of 6 Core OM4 Multimode Fiber Cable as per technical specification.
-
-
-
Supply, Installation, Testing & Commissioning of 24 Port LC multimode loaded LIU.
-
-
-
Supply , Installtion , Testing and comissioning of 48 port loaded LIU for core switch to access switch connectivity over fiber.
-
-
-
Supply, Installation, Testing & Commissioning of LC - LC Fiber patch cord OM4, 3 Mtrs.
-
-
-
Supply, Installation, Testing & Commissioning of 6 Core, Single Mode, OS2 as complete as required.
-
-
-
Supply, Installation, Testing & Commissioning of wifi Access point as complete as required.
-
-
-
IP CCTV SYSTEM
-
-
-
Supplying, installation, testing & commissioning of 4MP or better IP Network TDN Low-Light IR Rugged Dome Camera, 1/3" CMOS or better, 4MP (2592 x 1520) @ 20fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.01 lux @ F2.0 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 30m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 55db, Shutter Speed 1 - 1/100,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, , Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL.
-
-
-
Supplying, installation, testing & commissioning of 4MP IP Network TDN Low-Light IR Rugged Bullet Camera, 1/2.7" CMOS or better, 4MP (2592 x 1944) @ 25fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.008 lux @ F1.6 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, 2.7 to 13.5mm 5X motorized focus & zoom lens, Field of View FoV H:85°-24°, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Motion Detection, Face Detection, 4Privacy Mask, 4 Region Of Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL
-
-
-
Supplying, installation, testing & commissioning of Outdoor 1/2.8 inch CMOS 2MP or better, IR PTZ Camera ; 40x Optical Zoom & 16x Digital Zoom, tripple stream; IR distance: 200 meter or better; Lens 4 -175mm Motorized Auto focus zoom lens; Memory card slot: Min 256GB support. Minimum Illumination- Sense up on- Color: 0.001 lux color, B/W: 0 lux IR On, WDR 120dB, Edge Video Analysis Video Motion Detection, Intrusion, Lioter, Counter & Tampering, 3DNR, BLC, HLC, White Balance, EIS, Defog, Mechanical switchable IR filter (Auto ICR), Pan Range 360° continuous, Tilt Range -10° to 90°, Pan/Tilt Modes - Pan: 0.1°/s - 180°/s; Tilt: 0.1°/s - 90°/s, Presets 200, Preset Accuracy 0.25 Deg, 16 Patrol & Tours, Alarm I/O - 2In/2Out, 2-Way Audio- 1/1 Channel In/Out, 256GB Memory card slot, 4 individually configurable privacy masks, 4 Region of Interest, POE+ or 24VAC 3A for indoor/Outdoor application, IP66/67, IK 10 ; Certifications: ONVIF Profile S/G/T compliant, UL
-
-
-
Supplying, installation, testing & commissioning of IP Network Video Storage Manager Server
Channel Network Video Storage Manager Server - NSM shall have Intel® Xeon Silver 4210R, 2.2 GHz or better, Mnimum 32GB RAM, 1+1 750W hot plug redundant power supply, OS drive: 2 x 240 GB in RAID 1; 12 field upgrade up to 20 TB SATA/SAS hard drive options for Video Recording, Data RAID Level: 0, 1, 5, 6, 10. NIC card 4 x 1GbE supporting network throughput of 800 MBPS, Windows Server 2019 R2 64- bit/Windows10 64-Bit IOT Operating System, Microsoft SQL Server/Express 2019. NSM Shall support upto 128 Cameras @ 1080P, 25fps, 09 Remote Client Licenses inbuilt, Web Clients, Monitor Layout up to 4x4, Digital Signature for Video Clip, Continous & Motion Based Recording options, up to 8X forawrd & backward palyback, Playback search as date/time timeline, time jump FWD/REV, bookmarks, calendar, preview, film strip, event search and SMART Motion Search as a min. NVR shall be ONVIF S/G/T certified and liested on ONVIF Website. NVR shall Support Two -Way Audio with cameras equiped with Microphone & Speaker. Each NSM shall be offered with 128TB Video Stoarge for Recording for 30 days.
-
-
-
Supply, Installation, Testing and commissioning of Managable 24 port Switch with Power on Ethernet (PoE) enabled, 10/100, RJ45 Access ports with PoE complete as required.
-
-
-
Supply, installation, testing and commissioning of of 16 TB HDD all accessories complete as required.
-
-
-
Supply installation and commissioning of 48 inch LED monitor for disply of camera.
-
-
-
SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM
-
-
-
Supplying installation testing and commissioning of Grid interactive roof top monocrystalline solar photo voltaic power generation system including all the required accessories like Solar PV module, Grid Tie invertor, arrey junction box, cabling & wiring, earthing, surge protection device, Frame structure for mounting of solar panel. The cell shall be poly crystaline silicon cells of 6 inch each and module efficiency shall be more than 17%. Solar module shall have linear output warranty with degradation not exceeding 0.7% From 2nd Year onwards. Minimum 80% power output must be assured at end of 25 years. The front glass of solar module shall be low iron tempered glass ARC type. Termination box shall be Thermo-plastic, IP 67 or better, UV resistant with built-in-bypass. The nominal power of a single PV module shall be minimum 540 Wp or higher. Positive power tolerance modules only to be used. RF identification tag for each solar module shall be provided inside the module and must be able to withstand environmental conditions. The solar panel shall be complience of IEC 61215, IEC 61730 certified by TUV Rheinland / UL. The solar panel shall be installed as per BOQ & detailed technical specification.
-
-
-
AUTOMATIC FIRE DETECTION GAS SUPPRESSION SYSTEM
-
-
-
Supply, fixing, testing and commissioning of Supply, fixing, testing and commissioning of Automatic Linear pneumatic Tube Detection based FK 5-1-12 Pre-Engineered System for Electrical Panels (consisting of the following components.)
-
-
-
2.0 KG UL Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.
-
-
-
4.0 KG UL Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.
-
-
-
9.0 KG UL Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.
-
-
-
UL Listed Linear Pneumatic Heat Detection Tube with all necessary fittings & supports, HR Grade,UV Protected, MultiLayered, Made of Special Modified Polyamide Material, Inner diameter 4mm, Outer Diameter 6MM, Operating Pressure 15 8Bar, Maximum Pressure 30 Bar at maximum Temperature of +65 Degree C, Pressurized.
-
-
-
Master Control Unit with Audio Visual Alarm with wiring to make complete system operational. The Control Panel should have provision for integration with Fire Alarm/SCADA/BMS System (Supply to be provide by the end client at 220 Volt AC).
-
-
-
For Server Room
-
-
-
Supply, fixing, testing and commissioning of UL Listed & PESO Approved High Pressure Seamless BIS 7285 approved Cylinders with contact Pressure Gauge & PESO Approved Valve, Including all fittings and accessories with Respective size mounting bracket. The cylinder size to be considered respective to filling density allowed by OEM
-
-
-
140 Ltr (Master Cylinder)
-
-
-
140 Ltr (Slave Cylinder)
-
-
-
Supply, fixing, testing and commissioning of FK 5-1-12 manufactured by 3M, with Zero Ozone Depeltion Potential and Very Low Global Warming Potential of 1 with 20 Years Blue Sky Warantee against any regulatory Bans and Restrictions.
-
-
-
Supply, fixing, testing and commissioning of Master Cylinder Kit complete Comprising all mandatory accessories : Electric Actuator, Manual Release Device, Discharge Hose - DN 50, Manifold Check Valve, Reset Toolkit, Cylinder Strap, Caution Advisory Signage’s, System should include Electric Control Head operated electrically from the detection and control system with a manual actuator and Wire Braided Flexible Rubber Hose with Elbow and connectors complete assembly to Connect Novec 1230 Cylinder Assembly Discharge outlet with Discharge Pipe or Discharge Manifold. On any displacement of solenoid valve, master cylinder kit shall be able to notify the fault by audio/visual mean.
-
-
-
Supply, fixing, testing and commissioning of Slave Cylinder Kit Complete Comprising all mandatory Accessories: Pneumatic Release Device, Actuation Hose, Discharge Hose - DN 50, Manifold Check Valve, Cylinder Straps & Caution Advisory Signage’s to Connect FK 5-1-12 Slave Cylinders.
-
-
-
Supply, fixing, testing and commissioning of 'Discharge Nozzles to Discharge FK 5-1-12 Gas in the Hazard Area as hydraulic calculation and flow rate required in 180 Deg/360 Deg Discharge Pattern.
-
-
-
Supply, fixing, testing and commissioning of 'Discharge Pipe with Support and Fittings, CS Seamless to ASTM A-106 Schedule 40/50. along with threaded fittings of 3000# conforming to ANSI B 16.11
-
-
-
Supply, fixing, testing and commissioning of 2 Zone Microprocessor Based Automatic Gas Extinguishing Panel with 2 Batteries. Two Zone automatic extinguishing panel should be CE Approved and Operates on 220-240 VAC, 10%, 50 Hz, 100W. Consisting Smoke Detector/Heat Detector/Multi Detector, Manual Release Switch. The Manual release switch module shall comply with the requirements of BS7273-1/UL, Abort Switch. The Abort switch module shall comply with the requirements of BS7273-1/UL, Hooter with Strobe Light, Response Indicator & Discharge And Pre Discharge Indicator., along with Loop Cable (2C x1.5mm) Armoured.(Fire Alarm System with respect to Room size)
-
-
-
ACCESS CONTROL SYSTEM
-
-
-
Supply ,Installation ,Testing & Commossioning of 4 Door 4 reader access control panel with onboard 32 Bit RISC ARM CPU, 8MB flash memory, shall support up to 30000 card user, 100000 event transactions, TCP/IP, the panel should have inbuilt 4 GB SD memory card to take mirror image of device configuration. data shall support standard Wiegand readers, Access Control panel should have MODBUS connectivity to integrate the panel with BMS (Building Management System), with metal enclosure & inbuilt power supply, facility of din-rail mounting should available. capable to integrate with IP/CCTV & NVR for access event alerts, Inbuilt door interlocking facility, SNMP alerts facility, Low battery and AC fail alert facility & reader Tamper detection alert facility should available.
-
-
-
Supply ,Installation ,Testing & Commossioning of 2 Door 2 reader access control panel with onboard 32 Bit RISC ARM CPU, 8MB flash memory, shall support up to 50000 card user, 200000 event transactions, TCP/IP, the panel should have inbuilt 4 GB SD memory card to take mirror image of device configuration. data shall support standard Wiegand readers, Access Control panel should have MODBUS connectivity to integrate the panel with BMS (Building Management System), with metal enclosure & inbuilt power supply, facility of din-rail mounting should available. capable to integrate with IP/CCTV & NVR for access event alerts, Inbuilt door interlocking facility, SNMP alerts facility, Low battery and AC fail alert facility & reader Tamper detection alert facility should available .
-
-
-
Supply, installation, testing and commissioning Short Range (up to 9 cm ) Smart Card Reader For Exit of Lift Access Doors , tripod/Flap barrier- Entry & Exit (doors) as per the specification.
-
-
-
Supply, installation, testing and commissioning of contactless Clamshell 2K /2Application Area Smart Card suitable for Access Door as per the specification.
-
-
-
Supply, installation, testing and commissioning Access Control System Server Software consisting of Access Control system , Alarm Document , Alarm management , All these along with high end security features consist in single package as per specification.
-
-
-
Supply, Installation, testing & commissioning of Single Leaf Electro Magnetic Lock of Suitable Capacity(Min 600 lbs) as per specification .Approved.
-
-
-
Single Door Leaf
-
-
-
Double Door Leaf
-
-
-
Supply and Laying of of 8 Core x 0.2 sq mm multi strand, copper, unarmored shielded Cable as per specification (between the every card readers & the access controllers)
-
-
-
Power Supply- Supply, Installation , testing and commissioning of 12 V SMPS DC Power Supply Unit, highly regulated and spikes free terminal voltage and heavy sourcing current for regulated terminal voltage.
-
-
-
Magnetic Contact- Supply, Installation, Testing and commissioning of Magnetic Contact.
-
-
-
Supply , Installation , Testing and commissioning of Single Front Facia Plate consisting of Soft Touch Push Buttons Emergency Exit Door Release and indicator LED to show the door status.
-
-
-
Supply Installation testing and Commissioning of Biometric 50,000 templates (1: N) and 800,000 transaction records 3.5 in color TFT display Internal Camera supports capture and display (or storage) of the user’s image Standard backup battery Optional integrated proximity or smart card reader Built-in USB port allows for manual data transfer when the network isn’t available 8 user-defined function keys Relay contacts for access control applications Multi language support Audible and Visual indications for acceptance/ rejection of valid/invalid fingers SDK is available for OEM customers and software developers.
-
-
-
AV SYSTEM
-
-
-
Supply Installation Testing and Commissioning of Fine Pitch Active LED Wall of 2.5 mm pixel pitch of Size 6.60 m x 2.03 m, Resolution: 2640 x 810, Pixel Density (pixels/m²): 1,60,000, Cabinet Material: Die-casting Aluminum, Refresh Rate: 3840 Hz, Viewing Angle (H × V): 160° x 150°, IP Rating (Front/Rear): IP50/IP50, LED Controller to manage the LED screen, Certifications: CE, FCC, CB, RoHS, REACH with Mechanical Structure to mount the LED screen.
-
-
-
Supply Installation Testing and Commissioning of Fine Pitch Active LED Wall of 2.5 mm pixel pitch of Size: 2.40 m x 1.35 m, Resolution: 960 x 540, Pixel Density (pixels/m²): 1,60,000, Cabinet Material: Die-casting Aluminum, Refresh Rate: 3840 Hz, Viewing Angle (H × V): 160° x 150°, IP Rating (Front/Rear): IP50/IP50, LED Controller to manage the LED screen, Certifications: CE, FCC, CB, RoHS, REACH with Mechanical Structure to mount the LED screen.
-
-
-
Switching System
-
-
-
Supply Installation testing and Commissioning of Display and Projection system for MultiFormat Matri Switcher shall support full featured 2x USB-C connectivity at 4K, with 2x HDMI2.0 and USB 3.1 input. Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps).Shall support built in control features, with 2x RS-232, TCP/IP, IR, 6x GPIO port and audio de-embedding functionality. It should have HDCP2.2, built in oscilloscope, advanced EDID manager for real time diagnostics of signal. Occupancy sensor connection (with 24V power supply). Must have 4x USB 3.1 hosting for peripherals device. 60 watt charging over single USB-C cable along with audio and video transmission; etc all complete.
-
-
-
Cable Cubby
-
-
-
Supply Installation testing and Commissioning of Cable Cubby Enclousre with HDMI, USB-C Connectivity, Flush mounted with all required accessories etc all complete.
-
-
-
Cables. & Accessories
-
-
-
Supply Installation testing and Commissioning of High Speaed HDMI Cable - 1 Meter with 4K UHD Support etc all comlete.
-
-
-
Supply Installation testing and Commissioning of High Speaed HDMI Cable - 5 Meter with 4K UHD Support etc all comlete.
-
-
-
Supply Installation testing and Commissioning of USB Type–C to USB-C Cable: 3 Feet etc. all complete.
-
-
-
Supply Installation testing and Commissioning of Type A Male to Type A Female USB cable - 3 Meter.
-
-
-
Display System
-
-
-
Supply Installation Testing and Commissioning of DLP / LCD laser projector, LCD Panel: 0.64" * 3 BrightEra LCD Panel Brightness: 5300 Lumens, Center lumens- 5800 Lumens, Resolution: 69,12,000 (192012003) Pixels, WUXGA (1920*1200) Contrast Ratio: ∞:1 (Infinite) Light Source: Laser Diode Lamp Life: 20,000 Hours Zoom Ratio: Manual (Approx. 1.6X) Throw Ratio: 1.23:1 to 1.97:1 Lens Shift: Manual; Vertical: -35% to +55%; Horizontal: +/- 15% Speaker Output: 16W Keystone Correction: Vertical: +/- 30 degrees; Horizontal: +/- 30 degrees Input Ports: Mini D-sub 15-pin, HDMI (2), HDBaseT, Video In, Audio In, Audio Out Control Ports: RS232, USB Type A, RJ45 Special Features: Reality Creation, Intelligent Settings, Bright View Dimensions: Approx. 422 x 129 x 338 mm (16 5/8 x 5 3/32 x 13 5/16 inches) Weight: Approx. 6.8 kg (15 lb)e.
-
-
-
Supply Installation Testing and Commissioning of Motorized Projection Screen, Image Size: 123 inch diagonal, Fabric: Matt White, Aspect Ratio: 16:10, With Low Voltage Control Module & RF Remote Control etc all complete.
-
-
-
Supply Installation Testing and Commissioning of Wireless presentation platform, BYOD wireless screen sharing, 4K UHD output resolution, No apps, no buttons, Enterprise level security.
-
-
-
Switching System
-
-
-
Supply Installation Testing and Commissioning of Switcher for VGA, DVI-I, HDMI and DisplayPort with Audio embedding, VGA, YPrPb, DVI, HDMI 1.4 and DP 1.1 with analog stereo audio from local inputs or embedded 7.1 HDR audio, Advanced EDID Management, No signal latency, zero frame delay, Pixel Accurate ReclockingSupports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps).
-
-
-
Cable Cubby
-
-
-
Supply Installation Testing and Commissioning of Cable Cubby Enclousre with HDMI, VGA+Audio, USB-C to HDMI Cable Pass Through, Flush mounted with all required accessories etc all complete
-
-
-
Supply & Laying of following size Cables & Accessories
-
-
-
HDMI Cable
-
-
-
VGA + Audio Cable
-
-
-
USB-C to HDMI Cable
-
-
-
HDMI Cable
-
-
-
Supply Installation Testing and Commissioning of Chairman Unit Compact, attractive, ergonomic design, with LED indicator in the Discussion Device and in head of microphone. Unit shall have integrated Loudspeaker and Built-in headphone socket with output level control,The chairman has a separate microphone button and priority button enable the user to function as the chairperson at a conference or meeting. The chairperson’s microphone shall be activated when the priority button is pressed and held in with Frequency response 200Hz-12.5kHz and Loudspeaker nominal output 72dB SPL.
-
-
-
Supply Installation Testing and Commissioning of Delegate Unit Compact, attractive, ergonomic design, with LED indicator in the Discussion Device and in head of microphone. Unit shall have integrated Loudspeaker and Built-in headphone socket with output level control,Color-coded light-ring indicator in head of microphone: green shall indicate that a request-to-speak has been added to the waiting list; green flashing shall indicate that the participant is first in the waiting list; red shall indicate that the microphone is active with Frequency response 200Hz-12.5kHz and Loudspeaker nominal output 72dB SPL.
-
-
-
Supply Installation Testing and Commissioning of Digital Controller with Plug-and-play functionality for quick and easy connection of Discussion Devices. System control shall have Web browser control to view and manage system settings and loudspeaker and headphone socket for listening to recorded discussions before replaying them to the Floor, or listening to recordings,System controller shall have Built-in Digital Acoustic Feedback Suppression (DAFS) .Controller shall support up to 80 Discussion Devices with Frequency response 200Hz-12.5kHz
Max. input (110 db SPL) 0.5% Sample rate 44.1kHz
-
-
-
Supply Installation Testing and Commissioning of two-way, full-range surface mount speaker, LF transducer housed in a fire rated ABS plastic enclosure for extended LF performance down to 75 Hz. Maximum SPL 98.5 dB Sensitivity: 86.5 dB 15W transformer, weather-resistant IP54 as per IEC-60529. Transformer taps: 100 V: 15 W, 7.5 W. Frequency response (-10 dB):75 Hz - 20 kHz.
-
-
-
Supply Installation Testing and Commissioning of 4 mic/line inputs, music source input, single zone Mixer amplfier with 120Watt RMS power, 100V Output, Individual Volume control, Master Bass and Treble Control.
Mains power supply 230 VAC ±10%, 50 Hz Frequency response (Line) 80 Hz to 18 kHz (+1/‑3 dB @‑10 dB ref. rated output) Frequency response (Mic.) 80 Hz to 18 kHz (+1/‑3 dB @ ‑10 dB ref. rated output) Distortion 1% @ rated output power, 1 kHz
Mic./Line input 4 x
-
-
-
Supply Installation Testing and Commissioning of 19 "Equipment Rack,36 U Made of MS for housing of all above equipment , front lockable glass door, Fan tray fro colling, Caster wheel base , Main Panel with Spike Buster, Indivdual FUSE power supply unit, including all internal wiring/ interconnection as required
-
-
-
Supply Installation Testing and Commissioning of of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz.
-
-
-
Display System
-
-
-
Supply Installation Testing and Commissioning of DLP / LCD laser projector, LCD Panel: 0.64" * 3 BrightEra LCD Panel Brightness: 5300 Lumens, Center lumens- 5800 Lumens, Resolution: 69,12,000 (192012003) Pixels, WUXGA (1920*1200) Contrast Ratio: ∞:1 (Infinite) Light Source: Laser Diode Lamp Life: 20,000 Hours Zoom Ratio: Manual (Approx. 1.6X) Throw Ratio: 1.23:1 to 1.97:1 Lens Shift: Manual; Vertical: -35% to +55%; Horizontal: +/- 15% Speaker Output: 16W Keystone Correction: Vertical: +/- 30 degrees; Horizontal: +/- 30 degrees Input Ports: Mini D-sub 15-pin, HDMI (2), HDBaseT, Video In, Audio In, Audio Out Control Ports: RS232, USB Type A, RJ45 Special Features: Reality Creation, Intelligent Settings, Bright View Dimensions: Approx. 422 x 129 x 338 mm (16 5/8 x 5 3/32 x 13 5/16 inches) Weight: Approx. 6.8 kg (15 lb)
-
-
-
Supply Installation Testing and Commissioning of Motorized Projection Lift, Aluminium Tubular Motorized Lift with LVC, RF remote, Max Projector size it can take : 600 x 600 x 250 ( W X D X H), , Carrying Weight Capacity : 25 kgs, Drop : 1000 mm ( 1 Mts) etc all complete
-
-
-
Supply Installation Testing and Commissioning of Motorized Projection Screen, Image Size: 130 inch diagonal, Fabric: Matt White, Aspect Ratio: 16:10, With Low Voltage Control Module & RF Remote Control etc all complete
-
-
-
Switching System
-
-
-
Supply Installation Testing and Commissioning of Display and Projection system for 6x2 matrix switcher:- 6 video inputs and 2 video outputs - 4 HDMI 1.4 and 2 HD BaseT inputs and 2 independent HDMI outputs. 4K@30Hz, 3D capabilities and HDCP fully supported. should have 4 audio connectors for audio insertion and 2 audio outputs for de-embedding, PoE 48V remote (both inputs and outputs) etc. all complete.
-
-
-
Supply Installation Testing and Commissioning of Multiformat Transmitter, HDMI, VGA, and Audio inputs, Extends VGA, DVI, HDMI 1.4 , Audio, Ethernet, RS-232, up to 120 Meter over one CAT5/6/7 cable, HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant, HDBaseT compatible, Pixel Accurate Reclocking, Supports HDMI 3D signal formats, Bi-directional RS-232 and IR extension (pass-through and control), Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps) etc all complete
-
-
-
Audio System
-
-
-
Supply Installation Testing and Commissioning of Wireless system controller which shall be used as a standalone central control device for wireless connection and control of the Wireless Devices. System controll shall have web interface for system setup, configuration, control and licensing, Remote interfacing, using API to control microphones and 3rd party camera systems.Controller have possiblity to upload customer loog on all devices with Seamless automatic wireless frequency channel switching; up to 44 channels in the 2.4/5 GHz band.
-
-
-
Supply Installation Testing and Commissioning of wireless Chairman unit with 4.3 inch capacitive touch screen and built‑in NFC reader for fast recognition of participants and microphone with selection button and volume control button. With pluggable high-directive microphone’ shall be a stylish high-directive microphone and removable lithium-ion Battery Pack. Chairmain unit loudspeaker and microphone can be active at the same time for a face to face meeting experience, unit shall have headphone rotary volume controls and Unit should operate in the 2.4 GHz and 5 GHz (UNII1, 2 (extended) and 3) (license free) band. Same unit can be configured as a chairman or delgate as an when required from the controller.
-
-
-
Supply Installation Testing and Commissioning of wireless Delegate unit with 4.3 inch capacitive touch screen and built‑in NFC reader for fast recognition of participants and microphone with selection button and volume control button With pluggable high-directive microphone’ shall be a stylish high-directive microphone and removable lithium-ion Battery Pack. Chairmain unit loudspeaker and microphone can be active at the same time for a face to face meeting experience, unit shall have headphone rotary volume controls and Unit should operate in the 2.4 GHz and 5 GHz (UNII1, 2 (extended) and 3) (license free) band. Same unit can be configured as a chairman or delgate as an when required from the controller.
-
-
-
Supply Installation Testing and Commissioning of Charger for five ‘Batteries’ shall include charging status indicators per Battery Pack. It shall be possible to loop-through the mains power supply of 2 to maximum five Chargers (the maximum number of loop-through Chargers is depending on the country mains supply voltage) so that up to 25 Battery Packs can be charged at the same time. A mains power supply, loop-through socket and mounting bracket shall be included with the product
-
-
-
Supply Installation Testing and Commissioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz
-
-
-
Supply Installation Testing and Commissioning of Lapel Wireless Mic system that has a min of 14-hour battery life from two AA alkaline batteries. uni-directional polar pattern,condensor microphone ,frequency response 83Hz-18kHz,RF sensitivity 1.0 Uv,Image rejection55dB,Dyanmic range 95dB and receiver having 30 channels possible,S/N ratio 100dB A,dynamic range 95db B,distortion 1 %,frequency band:618-634MHz,modulation:+/-40kHz
-
-
-
Supply Installation Testing and Commissioning of 4 mic/line level inputs with AEC, 4 mic/line level outputs, up to 8 channels of configurable USB audio, a 2-channel VoIP interface, and a standard FXO telephone interface, configuration and control for signal routing, mixing, equalization, filtering, and delay
-
-
-
Supply Installation Testing and Commissioning of 8 channel Compact Mixer Class D Amplifier (5 x Mono + 3 x Stereo), Auxiliarys (FX, AUX) : 1 Pre, 1 Post, Class D Amplifier with Frequency Response, -3 dB: 22 Hz to 22 kHz, Crosstalk, 1 kHz Channel to Channel -78 dB, Max. dual channel output power : 2 x 550 W @ 4 Ω; 2 x 320 W @ 8 Ω ,stereo 24/48-bit multi effects processors, 30 Factory Presets, Tap-Delay, Digital Audio Interface Channels : 2 In / 2 Out, AD/DA Conversion, Sampling Rate : 32/44.1/48 kHz, Phantom power, switchable 48 V DC.
-
-
-
Supply Installation Testing and Commissioning of Dual 4" two-Way Speaker with a Frequency Response(-10dB):- 70Hz-20Khz & Long Term Program Power Handling of ≤ 200W (at Nominal Impedance of 8ohms). The Loudspeaker should have a Sensitivity(1W/1m) of atleast 88dB with a Max. SPL of 112dB. It should have Built in LMT with Power Taps of 7.5/15/30W at70/100V Line. The Sound Dispersion should be 120x70 Degrees or more. The Speaker Should Come with OEM wall Mounting Bracket.
-
-
-
Cable Cubby
-
-
-
Supply Installation Testing and Commissioning of Cable Cubby Enclousre with HDMI, VGA+Audio, Cable Pass Through, Flush mounted with all required accessories etc all complete.
-
-
-
Supply & Laying of following size Cables & Accessories
-
-
-
HDMI Cable
-
-
-
VGA + Audio Cable
-
-
-
CAT6A cable F/UTP (as per actual) etc all complete
-
-
-
Sheilded Audio Cable (as per actual) etc all complete
-
-
-
Connector and Accessories
-
-
-
Supply Installation Testing and Commissioning of Rack Structure 16U Air Cooled AV Equipment Rack with 4 Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels.
-
-
-
DIESEL GENERATING SET
-
-
-
Supply, Installation testing and Commissioning of Silent type Diesel Generating Set at 0.8 PF, 415 Volts, 50 cycles per second, 1500 rpm, 3 phase, suitable for parallel operation / PLC based synchronization, 0.85 load factor including circuit breaker for isolation, sound proof acoustic and weather proof enclosure, residential type silencer (as per latest CPCB norms) fabricated out of CRCA sheet of 16 SWG thickness with 9 tank pretreated before powder coating with ventillation system complete in all respects comprising of the following.
-
-
-
Diesel Engine -
-
-
-
Diesel Engine suitable for driving alternator of above rating, compression ignition, 4 stroke cycle, Radiator cooled, turbo charged, battery starting, 1500 RPM, suitable for above output of alternator at 40oC, 50% RH & at 210 M MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% overloading for one hour after 12 hrs of prime continuous loading, complete with all the accessories i.e. tachometer with hour meter, flexible coupling with guard, crank case of steel, crank shaft, conncting rods, electronic governing system, dynamically balanced flywheel, air intake manifold, Air cleaner, anti vibration pads, starter motor, including all other accessories required to complete the system.
-
-
-
Instrument Panel - Engine mounted Instrument Panel fitted with and having digital display for followings :
-
-
-
Start stop switch with key
-
-
-
Water temperature indication
-
-
-
Lubrication oil pressure indication.
-
-
-
Lubrication oil temperature indication.
-
-
-
Battery charging indication
-
-
-
RPM indication
-
-
-
Over speed indication
-
-
-
Low Lube oil trip indication
-
-
-
Engine hours indication
-
-
-
Alternator -
-
-
-
Synchronous Alternator of above capacity at 0.8 PF, 3 phase, 415 volts, 50 cycles, 4 wire, 1500 RPM, suitable for operation at 40 deg C, 50% RH & at 210 meter above MSL, capable of taking 10% overlioading for one hour after 12 hrs of prime continuous loading, brushless, self excited, self regulated through AVR, continuous duty confirming to IS 4722, BS 2613 suitable for tropical conditions, class H insulation, including terminal box suitable for bus duct termination / cable termination as required.
-
-
-
Note : - Alternator should have with all other accessories as per specified in Technical specfications.
-
-
-
Provision of installation of CT's before star point for Differential protection scheme. (DG sets for 1250 KVA only)
-
-
-
6 nos of 2000 / 5 A CT's of PS class of suitable knee point voltage, magnetizing current & resistance.(3 CT's should be installed before star point of alternator) & 1 No. 1000 / 5A CL-5P10 (DG sets for 1010 KVA only)
-
-
-
Base Frame - Both the engine and alternator shall be mounted on suitable base frame made of MS channel which shall be installed on cement concrete foundation and vibration isolating arrangement as per recommendations of manufacturer.
-
-
-
Microprocessor based Power command controller (P.C.- 3.3 Jakson or equivalent) suitable for auto / manual synchronization & auto load sharing.
-
-
-
Inbuilt Fuel tank of standard capacity complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, fuel transfer system for automatic fuel refilling system with pump, piping, valves, level indicators etc. complete.
-
-
-
Daily service Fuel tank of 990 liters capacity fabricated out of 2 mm thick MS sheet complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, provision for fuel transfer system, level indicators and all standard accessories etc. as required.
-
-
-
Exhaust Silencer - Exhaust manifold with residential silencer.
-
-
-
The D G set should be supplied with required hardware for external PLC based auto synchronization, auto load sharing, auto load management system.
-
-
-
Starting system - 24 Volt DC starting system comprising of starter motors : voltage regulator and arrangement for initial excitation complete with 12/24 Volts suitable nos. lead acid type batteries of suitable AH.
-
-
-
Ventillation System - Arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per standard specifications.
-
-
-
1250 KVA
-
-
-
Supply, Fixing, testing and Commissioning of Exhaust gas piping system of Class `B' MS pipe as per IS:1239 for upto 150 mm dia and for 200 mm dia & above MS pipe as per IS:3589 with welded joints, cut to required lengths with necessary bends, fittings, flanges, painting over primer coat, with mineral wool / rock wool insulation of minimum 75 mm thick of 150 Kg per cu M density on all sides of exhaust pipe, with chicken mesh wrapping and 26 SWG aluminium sheet cladding complete as required. The aluminum foil should be tightly cladded to insulation surface of pipe. The aluminum cladding shall be locked with sheet metal screws with other sections of aluminium foil. The measurement shall be done on the basis of centre line. (Stack height should be in accordance with emission regulations of CPCB, which will go well above the top most terrace) The exhaust piping system should be suitable for upto 550oC temperature, the surface temperature of exhaust pipe shall not exceed more than 60oC. (The rates are exclusive of support structure) (Note - Final size of exhaust pipe will be confirmed by the DG vendor after calculating the actual back pressure and submit the same to client / consultant for approval)
-
-
-
400 mm dia (wall thickness - 4.85 mm)
-
-
-
Supply & fixing of SS Bellow of following diameter 400 mm dia
-
-
-
Supply & fabrication of D G exhaust pipe supports by M.S angle iron of size not less than 100 x 50 mm x 6/8 mm duly grouted in the wall through minimum 8 mm thick plate and with suitable MS angle / channel iron structure. The entire MS support structure should be painted by 2 coats of anti corrosive paint over primer coat of approved shade and make. The design of support to be duly approved by the Structural Consultant / Architect before fabrication and installation.
-
-
-
SUB- STATION WORK
-
-
-
11 KV HT VCB FOUR BREAKER PANEL BOARD (INDOOR TYPE) (1 INCOMMING + 2 OUTGOING)
-
-
-
Supplying, Installation, Testing & Commissioning of indoor type floor mounted metal clad, 11 KV VCB panel with 3 nos VCBs, totally inclosed & fully interlocked, horizontal drawout, horizontal isolation type breaker as per IS 13118, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, manually charged and manually closing breaker suitable for use on 11 KV, 3 phase, 50 Hz A.C. supply with short circuit fault level of 350 MVA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 630 Amp capacity, breaker featured with mechanical ON/OFF indicator with hand trip device.
-
-
-
Spring release coil, shunt trip coil and auxiliary switch of 4 NO + 4 NC and equipped with following switchgears and accessories i/c connections for 3C x 300 sq.mm. XLPE 11 KV cable (cable entry from bottom), end termination with heat shrinkable jointing material etc. as required. (Note - Cost of end termination not included in this item).
-
-
-
a) Incomming - 1 No, 630 Amp, VCB.
-
-
-
b) 1 No.- 11 KV / 110 Volt PT class 0.5 accuracy and 100 VA burden with 1 No. voltmeter (0-12 KV), digital type, selector switch for voltmeter and protection MCB for HT Metering up to 12 KV on incommer.
-
-
-
c) 1 No.- (0 - 150 A) dual scale Ammeter, digital type, selector switch for ammeters.
-
-
-
d) 1 No - Microprocessor based numericak relay with O/C, E/F and S/C protection.
-
-
-
e) 1 No - set of dual core dual ratio 3 CTs 150/5A of 15 VA burden and accuracy class 0.5 for metering and class 5P10 for protection.
-
-
-
f) 1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.
-
-
-
g) 1 No. hooter with hooter acceptance and reset push button.
-
-
-
h) 1 No - Red, Yellow & Blue for phase indication.
-
-
-
i) 1 No - Amber for Trip indication.
-
-
-
j) 1 No - Red `ON' Green `OFF'indication.
-
-
-
k) 1 No - Spring charge indication.
-
-
-
l) 1 No - Auto trip indication.
-
-
-
m) 1 No. hooter with hooter acceptance and reset push button.
-
-
-
n) 1 No. master trip relay. ( Electromechanical Type )
-
-
-
o) 1 No.Trip ckt supervision relay. (Electromechanical Type )
-
-
-
a) Outgoing - 2 No, 630 Amp, VCB.
-
-
-
b) 2 No.- (0 - 80 Amp) dual scale Ammeter, digital type, selector switch for ammeters.
-
-
-
c) 2 No - Microprocessor based numericak relay with O/C, E/F and S/C protection.
-
-
-
d) 2 No - set of dual core dual ratio 3 CTs 80/5 A of 15 VA burden and accuracy class 0.5 for metering and class 5P10 for protection.
-
-
-
e) 2 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.
-
-
-
f) 2 No. hooter with hooter acceptance and reset push button.
-
-
-
g) 2 No - Red, Yellow & Blue for phase indication.
-
-
-
h) 2 No - Amber for Trip indication.
-
-
-
i) 2 No - Red `ON' Green `OFF'indication.
-
-
-
j) 2 No - Spring charge indication.
-
-
-
k) 2 No - Auto trip indication.
-
-
-
l) 2 No. hooter with hooter acceptance and reset push button.
-
-
-
m) 2 No. master trip relay. ( Electromechanical Type )
-
-
-
n) 2 No.Trip ckt supervision relay. (Electromechanical Type )
-
-
-
o) 2 No.auxiliary relay for transformer fault.
-
-
-
p) Power pack.
-
-
-
H.T. Panel described as above
-
-
-
TRANSFORMER
-
-
-
Design, manufacture, supply, installation, testing and commissioning of out door type copper wound transformer continuously rated for 3Ph 50 Hz at full load rating the transformer should have oil immersed winding having vector group DY-11, HT side connected in star with neutral brought out connected to provide separate earthing. The transformer shall have power terminal arrangement bushing / cable end box on HT side and cable end box on LT side. 1600 KVA, 11 KV /0.415 KV, 3 phase, 6.25 % impedance, 50 Nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the Transformer. The transformer should have following standard as per amended IS specification and the load * no load losses shall be limited to the values given below or as per IS 2026 and latest IS-1180 or Norms issued by SEB which ever are Lower.
-
-
-
Oil Conservator with filling hole with cap and plain oil level gauge.
-
-
-
Silica gel dehydrating breather charged with silica gel.
-
-
-
Oil drain Valve
-
-
-
Oil Filter Valve
-
-
-
Lifting eyes / Hooks
-
-
-
Two earthing Terminals
-
-
-
Diagram and rating plate
-
-
-
Air Vent
-
-
-
Explosion Vent
-
-
-
100 mm dia thermo meter with thermometer pocket
-
-
-
Four bi directional plain roller
-
-
-
Buchholz relay
-
-
-
Resistance Temp detector
-
-
-
Marshalling box
-
-
-
Automatic Voltage Regulator ( AVR)
-
-
-
Remote Tap Changing controller ( RTCC)
-
-
-
Transformer 11000/433 volts with on load Tap changer -15% to +5% in steps of 1.25% with RTCC, AVR and marshalling box and other specification as per BIS Level-2
-
-
-
1600 KVA
-
-
-
ELECTRICAL PANEL
-
-
-
DG SYNCHRONIZING CUM CHANGEOVER PANEL ( 3x1250 KVA DG SET)
-
-
-
Supply, Installation, Testing & commissioning of Main DG Control panel with D.G. Synchronizing relay & Micro PLC, this will be floor mounted, free standing, compartmentalized, indoor duty, dust proof, vermin proof, front operated, electrical panel fabricated from 14 SWG CRCA sheet steel, class - IP 4X painted and manufactured exactly as per specifications laid in this document and will be complete with the main and auxiliary bus bars, interconnection, earth terminals, earth bus and will be powdered coated finished. All the busbar joint shall be protected by clip on type sleeve. The DG control panel shall use all draw out 3 position withdrawn type breakers suitable for 415 V AC, 3 phase, 50 Hz, 4 wire supply system and will have fault level of 50 KA or as required as per consultant approval. The panel will be made as per detailed specifications and drawings forming part of this document. (Under no case temperature of LT Panel shall be more at any point of the panel, otherwise necessary exhaust fan shall be have to provided) Bus bar calculations considering temperature derating, enclosure derating, sleeving derating must be done and submitted for checking. Panel shall be of (TTA) Type Tested Assembly with form 4B seperation as per IEC 61439-1 & 2 (TTA panel- L&T-Ti,Schneider-Blokset,Seimens-seipan,ABB-ar2k)
-
-
-
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt microprocesor based Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have Ics=Icu=Icw=50 KA for 1 sec, fully rated at 50 deg C ambient temperature & shall be supplied with adopter terminal connection whose orientation can be changed at site. All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947
-
-
-
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt current, volatage metering, ZSI (for discrimination) with trip history. All four pole ACB's shall have neutral protection at 50% and 100% . All ACB Shall have common frame till 3200 Amp.
-
-
-
The Panel shall have a provision for AUTOMATIC FIRE DETECTION GAS SUPPRESSION flooding system for complete panel of each compartment / section including gas bank of required capacity (Note - Gas Supression flooding sysytem having seperate item).
-
-
-
Note - Complete panel have BMS compactible. Manufacturer shall provide all types of ports, Potential free contact, Aux contactor as required for integration with BMS.
-
-
-
AUTO OPERATION OF INCOMER / BUSCOUPLER ACB's.
-
-
-
Micro PLC shall be provided to achieve the Changeover, Interlocking and and following functions.
-
-
-
Changeover of Incommer and Bus coupler.
-
-
-
Interlocking.
-
-
-
Synchronizing of D.G. Set through synchronizing relay OR Synchronizing of D.G. Set through PCC 3.3 controller in case of Cummins Make D.G. Set.
-
-
-
Necessary hardware shall be provided to achieve above functions including micro PLC with real time clock, digital inputs/outputs, MMI with 2 line display, power supply, auxillary relays, PB's indication etc. & software for the above.
-
-
-
Automatic system shall be user friendly and shall have manual override.
-
-
-
3 Nos. 2000A feeder incomer and Each incomer breaker feeder shall have following: (For 3 x 1250 KVA D.G. Set)
-
-
-
One set of Generator control relay for Each D.G. Set with accessories for AMF, Load Management, Synchronizing and Interlocking through micro PLC. (Make of relay - Woodword / Dief).
-
-
-
One number incomer 3P 2000 amps EDO breaker with 630 Amp TP neutral contactor. for Each breaker shall have microprocessor based releases for O/C,S/C & earth fault protection with instantaneous. (50 KA).
-
-
-
3 No. indicating lamps to show the incoming power along with protection SP MCB's.
-
-
-
1 No. Digital AVF Meter with CT's.
-
-
-
1 No. Differential relay
-
-
-
Announciation window to cover LLOP, HWT, OIL Pressure, U/V, O/V, U/F, O/F, O/C, E/F, Differential relay faults shall be provided. 2 nos phase reversal relay shall be provided.
-
-
-
Engine should trip on LLOP, HWT, oil temp, O/V, O/F and breaker should trip on other faults.
-
-
-
Initially U/V & U/F will be bye passed till oil pressure is picked up.
-
-
-
Indicating lights for ACB ON / OFF, ACB trip, neutral contactor ON, D.G. on mains, D.G. fails to start.
-
-
-
Generator start /stop facility through push button from panel, necessary cranking relay shall be provided.
-
-
-
Suitable battery charger for 24V 360 AH with d.c voltmeter & d.c ammeter. D.C voltmeter and ammeter will be analouge type.
-
-
-
Whenever D.G. stop through PB, load shall be disconnected first.
-
-
-
BUSBARS
-
-
-
5000 Amp TPN busbars of aluminium alloy as per SLD.
-
-
-
OUTGOING
-
-
-
EACH OUTGOING FEEDER SHALL HAVE DIGITAL KWH METER.
-
-
-
3 No. 2500 Amp FP MDO Air Circuit Breaker (50 KA)
-
-
-
DG Synchronisation Panel Described as Above.
-
-
-
MAIN L.T. PANEL
-
-
-
Supply, Installation, Testing & commissioning of Main LT Panel. The panel will be totally enclosed type with, free standing, floor mounted, indoor duty, dust & vermin proof, compartmentlized, front operated, electrical panel fabricated from 14 SWG CRCA sheet steel as per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indication lamps, CT's, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 70 micron thickness. All the busbar joint shall be protected by clip on type sleeve. The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have changeover facility & interlocking through PLC to achieve electrical interlocking, buscoupler switching, auto operation of incommer and bus coupler etc and having following incomming and outgoing Air Circuit Breakers, MCCB as per the drawing and specification. Fault level shall be 50 KA. Panel shall be of (TTA) Type Tested Assembly with form 4B seperation as per IEC 61439-1 & 2 (TTA panel- L&T-Ti,Schneider-Blokset,Seimens-seipan,ABB-ar2k)
-
-
-
(Each Incomming / outgoing MCCB shall have microprocessor release and variable current setting from front, adjustable overcurrent, short circuit & earth fault protection, front extended lockable handle, pad lockable in off position, shrouding on incomer side, termination shall be suitable for aluminium bus bars / cables and as per specification.)
-
-
-
EMS software with screens, dashboards / Modbus data, Ethernet gateways, 8 port ethernet switch and reports for atleast 50 devices (Multi Function & Energy Meters). Software shall comply latest cybersecurity standards as per IEC62443-4-1 and IEC62443-4-2 (SL1) & ISO 50001.
-
-
-
The Panel shall have a provision for AUTOMATIC FIRE DETECTION GAS SUPPRESSION flooding system for complete panel of each compartment / section including gas bank of required capacity (Note - Gas Supression flooding sysytem having seperate item).
-
-
-
Note - Complete panel have BMS compactible. Manufacturer shall provide all types of ports, Potential free contact, Aux contactor as required for integration with BMS.
-
-
-
INCOMERS from 2 Nos. 1600 KVA Transformers
-
-
-
1 nos. 2500 AMP. Four Pole, Electrically operated 3 position motorized (220 V AC) drawout type Air Circuit Breaker with all inbuilt protections, with microprocessor based release, over current, earth fault, short circuit, Instantaneous short circuit, closing coil (220 V AC), trip coil (24 V DC), shunt trip release, inbuilt U/V release with LCD / LED display for event history & measurement of current parameters, 50 KA Breaking Capaciy with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947
-
-
-
The ACB shall be electrically interlocked with the bus coupler, DG incomers and other transformer incomers.
-
-
-
1 nos. 32 amp TP MCCB (50 KA) for OLTC (for each transformer incomer)
-
-
-
1 nos. 630 amp TP MCCB (50 KA) (without U/V protection) for Fire Fighting Pump Panel (As per SLD only)
-
-
-
Protection releases / relays, Metering & Accessories for each Transformer incomers
-
-
-
Surge Protection Device - Type - 01 (Class - B), 10/350 µ sec. (100 / 25KA)
-
-
-
Over Voltage / Under Voltage relay / release (3 phase) with timer.
-
-
-
Backup earth fault relay.
-
-
-
Restricted earth fault relay.
-
-
-
There shall be a provision : - If REF operates, they send a signal to Upstream HT breaker of Transformer incomer ( in HT Panel) to make it "OFF" for protection of transformer.
-
-
-
Master trip relay.
-
-
-
Trip Circuit Supervison relay.
-
-
-
TNC switch.
-
-
-
Auto manual selector switch.
-
-
-
1 nos. 0-500 volt range digital type voltmeter with selector switch
-
-
-
1 set of 3 CT's of ratio 2500/5A, Class 1.0 accuracy 15 VA burden for metering.
-
-
-
1 set of 3 CT's of ratio 2500/5A, Class 1.0 accuracy 15 VA burden for APFCR.
-
-
-
1 set - 415 / √3 / 110 / √3 Class 1.0 accuracy 100 VA burden PT along with primary and secondary fuse.
-
-
-
1 set of 4 CT's of ratio 2500/1A, Class PS for protection.
-
-
-
1 no. CT's of ratio 2500/5A, Class 5P10 for protection.
-
-
-
1 no. 0-2500 Amp range digital type ammeter with selector switch.
-
-
-
Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for communication / report generation. (or Dual meter)
-
-
-
Power factor meter.
-
-
-
Frequency meter.
-
-
-
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along with hooter, auxillary relay, 2 sets of push buttons.
-
-
-
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup MCB.
-
-
-
INCOMERS from 2 Nos. DG Synchronizing Panel
-
-
-
1 nos. 2500 AMP. Four Pole, Electrically operated 3 position motorized drawout type Air Circuit Breaker, with all inbuilt protections, with microprocessor based releases/relays, over current, earth fault, short circuit, Instantaneous short circuit, shunt trip release, closing coil (220 V AC), trip coil (24 V DC), inbuilt U/V release with LCD / LED display for event history & measurement of current parameters, 50 KA Breaking Capaciy with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947
-
-
-
Protection releases / relays, Metering & Accessories for each D G set incomers
-
-
-
Master trip relay.
-
-
-
Trip Circuit Supervison relay.
-
-
-
TNC switch.
-
-
-
Auto / manual / test selector switch
-
-
-
1 Set - 415 /v3 / 110 / v3 Volts PT Class 1.0 accuracy and 100 VA burden along with primary & secondary MCB.
-
-
-
0-500 volt range digital type voltmeter with selector switch
-
-
-
1 set - 3 CTs of ratio : 2500/5A , Class 1.0 accuracy 15 VA each burden for metering.
-
-
-
1 set - 3 CTs of ratio : 2500/5A , Class 5P10 accuracy 15 VA each burden for protection.
-
-
-
0-2500 Amp range digital type ammeter with selector switch.
-
-
-
Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for communication / report generation. (or Dual meter)
-
-
-
Frequency meter.
-
-
-
Power Factor meter.
-
-
-
1 No -12 point Temp Scanner with Alarm/ Trip contact for winding & bearing.
-
-
-
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC fuse/MCB along with hooter, auxillary relay, 2 sets of push buttons.
-
-
-
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB.
-
-
-
12 window annunciator with accept / reset / test push button for each DG set for following indications and alarm : set fail to start, engine over heat, high temperature, excitation failure, low lube oil pressure, over speed, low fuel oil level, cooling water flow failure, breaker trip, generator fault, DC control supply failure, out of limit voltages and spares.
-
-
-
Push buttons for Test. Accept. Reset. Fault Reset. Engine start, Engine stop, ACB close, ACB Trip Emergency stop.
-
-
-
Shut down due to low lube oil pressure/High water temp/Over speed/Low fuel level - set of 4 indication lamps.
-
-
-
Note : In normal case all three lamps shall be ON to indicate that incoming power supply is available. In case of power resumption after failure buzzer shall ring to indicate the power supply is resumed. There shall be one push button to acknowledge the same.
-
-
-
The ACB shall be electrically interlocked with the bus coupler and Transformer incomers.
-
-
-
BUSCOUPLER
-
-
-
1 no 2500 AMP Four Pole, Electrically operated 3 position motorised (220V AC) drawout type ACB's, closing coil (220V AC), trip coil (24V DC), with 50 KA Breaking Capacity with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:13947-2.
-
-
-
Protection releases / relays, Metering & Accessories for Bus Coupler (s)
-
-
-
Trip circuit supervision relay
-
-
-
TNC switch.
-
-
-
Auto / manual selector switch
-
-
-
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB.
-
-
-
The bus coupler shall be electrically interlocked with all incoming ACB's in such a way that at any one time two supply should not get mixed up.
-
-
-
BUSBARS
-
-
-
3200 Amp TPN busbars of aluminium alloy as per SLD.
-
-
-
MICRO PLC FOR AUTO OPERATION OF INCOMER / BUSCOUPLER ACB's.
-
-
-
Auto changeover.
-
-
-
Incomers & Buscouplers switching.
-
-
-
BATTERY & BATTERY CHARGER
-
-
-
1 No. 24V, 72AH SMF Battery with suitable battery charger for control supply.
-
-
-
OUTGOING
-
-
-
All outgoing feeder shall be provide with ON / OFF / Trip indication lamp with protection MCB's, Dual Source energy Meter.
-
-
-
04 Nos 1600A FP MDO Air Circuit Breaker (50KA)
-
-
-
02 Nos 1250A FP MDO Air Circuit Breaker (50KA)
-
-
-
02 Nos 630A TP MCCB (50 KA)
-
-
-
01 No 630A FP ON Load Changeover (50 KA)
-
-
-
01 No 400A TP MCCB (50 KA)
-
-
-
03 No 250A TP MCCB (50 KA)
-
-
-
Main L.T. Panel Described as Above.
-
-
-
AUTOMATIC POWER FACTOR CORRECTION PANEL (CAPACITOR PANEL)
-
-
-
Supply, Installation, testing & commissioning of 14 SWG CRCA sheet steel fabricated cubical type 600 KVAR A P F C Panel with 14% Detuned LC Filter consisting of 5 /10 / 25 / 50 / 100 KVAR (at 415 Volts rated voltage of bank shall be 525 Volts) capacitor units in tier formation, housed in an integrated cubicle type automatic switching ON and OFF control panel, floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 4X, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . Panel shall be of (TTA) Type Tested Assembly with form 4B seperation as per IEC 61439-1 & 2 (TTA panel- L&T-Ti,Schneider-Blokset,Seimens-seipan,ABB-ar2k)
-
-
-
The Panel shall have a provision for AUTOMATIC FIRE DETECTION GAS SUPPRESSION flooding system for complete panel of each compartment / section including gas bank of required capacity (Note - Gas Supression flooding sysytem having seperate item).
-
-
-
All out going MCCB's shall be thermal-magnetic based with inbuilt O/L & S/C release.
-
-
-
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link. The breaking capacity specified is Ics value. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc.
-
-
-
AC3 duty contactors should be used for switching individual capacitor banks.
-
-
-
The fault withstanding capacity of panel & its control gear shall be min. 50 KA rms for 1 sec.
-
-
-
Each section of capacitor panel shall have Verticle hood & exhaust fans for ventilation purpose.
-
-
-
INCOMING
-
-
-
Incomer circuit breaker has been included in the main panel.
-
-
-
1 set- 3 CTs , ratio 1250 / 5A Class 1.0 accuracy 15 VA burden for metering.
-
-
-
1Nos- (1250 A) digital Ammeter with selector switch
-
-
-
Micro processor based automatic power factor control relay (3 phase) (including power factor meter) in 13 steps for automatic cut off or add on capacitor units to keep the power factor at 0.95 with variation of loads. All associated auxiliary contactors / relays shall be provided with in the scope of work.
-
-
-
Phase indicating lamps with HRC fuses, and indicating in each capacitor chamber unit to indicate On/Off status of capacitor unit.
-
-
-
BUS BARS
-
-
-
1600 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with colour coding and insulated by heat shrinkable sleeves and clips on shrouds for joints.
-
-
-
OUTGOINGS
-
-
-
3 nos. of 250 AMPS TPN MCCB (35 KA) and 250 amps AC3 duty contactor with 100 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters . auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
4 nos. of 125 AMPS TPN MCCB (35 KA) and 150 amps AC3 duty contactor with 50 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters . auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
3 nos. of 63 AMPS TPN MCCB (35 KA) and 80 amps AC3 duty contactor with 25 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters, auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
2 nos. of 32 AMPS TPN MCCB (35 KA) and 40 amps AC3 duty contactor with 10 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters, auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
1 no. of 16 AMPS TPN MCCB (35 KA) and 20 amps AC3 duty contactor with 5 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters, auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
Capacitor Panel as described above
-
-
-
MAIN ELECTRICAL PANEL
-
-
-
Supply, installation, testing & commissioning of 14 SWG CRCA sheet steel fabricated cubical type Main Electrical Panel, floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 4X, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required. Panel shall be of (TTA) Type Tested Assembly with form 4B seperation as per IEC 61439-1 & 2 (TTA panel- L&T-Ti,Schneider-Blokset,Seimens-seipan,ABB-ar2k)
-
-
-
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt microprocesor based Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have Ics=Icu=Icw=50 KA for 1 sec, fully rated at 50 deg C ambient temperature & shall be supplied with adopter terminal connection whose orientation can be changed at site. All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947
-
-
-
All incoming & outgoing MCCB's shall be microprocessor based with O/L & S/C and E/F protection.
-
-
-
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link.
-
-
-
INCOMING
-
-
-
2 Nos. 1600 Amp FP EDO ACB (50 KA)
-
-
-
2 No.AVF Meter with inbuilt selector switch.
-
-
-
2 Set of phase indicating lamps with Single Pole MCB.
-
-
-
2 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUS COUPLER
-
-
-
1 no 1600 AMP Four Pole, Electrically ACB's,
-
-
-
BUSBAR
-
-
-
2000 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
4 Nos. 1000 Amp TP MDO ACB (50 KA)
-
-
-
3 Nos.630 Amp FP MCCB (35KA)
-
-
-
03 Nos. 400 Amp FP MCCB (35 KA)
-
-
-
07 Nos. 250Amp FP MCCB (35KA)
-
-
-
10 Nos. 200 Amp FP MCCB (35 KA)
-
-
-
04 Nos. 160 Amp FP MCCB (35 KA)
-
-
-
05 Nos. 100 Amp FP MCCB (35 KA)
-
-
-
Panel described as above
-
-
-
DISTRIBUTION PANEL
-
-
-
Supply, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital ammeter with inbuilt ammeter selector switch, digital voltmeter with inbuilt voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the incomming and outgoing MCCB shall have 25 KA Ics.The incoming MCCB shall be microprocessor based with O/L & S/C and E/F protection and all Outgoings up to 250A MCCB's may be thermo-magnetic based O/L & S/C protection. All outgoing MCB's shall be C type with 10 KA breaking capacity.
-
-
-
L+P PANEL BASEMENT
-
-
-
INCOMING
-
-
-
1 No. 200 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
250 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
05 Nos. 25 Amp FP MCB (10 KA)
-
-
-
08 Nos. 40 Amp FP MCB (10 KA)
-
-
-
05 Nos. 63 Amp FP MCB (10 KA)
-
-
-
Panel described as above
-
-
-
AHU PANEL (GROUND TO 5TH FLOOR)
-
-
-
INCOMING
-
-
-
1 No. 200 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
250 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
8 Nos. 40Amp FP MCB (10 KA)
-
-
-
12 No. 63 Amp FP MCB (10 KA)
-
-
-
Panel described as above
-
-
-
L+P PANEL ( GROUND TO 5TH FLOOR)
-
-
-
INCOMING
-
-
-
1 No. 200 Amp FP ON LOAD CHANGEOVER MCCB (35 KA)
-
-
-
1 No. 200 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
2 Set of phase indicating lamps with Single Pole MCB.
-
-
-
2 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
250 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
06 Nos. 25 Amp FP MCB (10 KA)
-
-
-
04 No. 40 Amp FP MCB (10 KA)
-
-
-
10 Nos. 63 Amp FP MCB (10 KA)
-
-
-
03 Nos. 63 Amp FP MCCB (25 KA)
-
-
-
Panel described as above
-
-
-
LIFT PANEL (TERRACE FLOOR)
-
-
-
INCOMING
-
-
-
2 No. 400 Amp FP MCCB (35 KA)
-
-
-
1 No Fixed type Automatic transfer switch 400 Amp rating in open frame with live to live transfer time 150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
500 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
15 Nos.63 Amp FP RCCB (300 mA).
-
-
-
06 Nos.40 Amp FP MCB (10 KA).
-
-
-
Panel described as above
-
-
-
PRESSURIZATION PANEL ( TERRACE FLOOR )
-
-
-
INCOMING
-
-
-
1 No. 400 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
500 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
28 Nos.63 Amp FP MCB (10 KA).
-
-
-
02 Nos.40 Amp FP MCB (10 KA).
-
-
-
Panel described as above
-
-
-
VENTILATION PANEL ( BASEMENT FLOOR )
-
-
-
INCOMING
-
-
-
1 No. 250 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
300 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
10 Nos.63 Amp FP MCB (10 KA).
-
-
-
02 Nos.40 Amp FP MCB (10 KA).
-
-
-
Panel described as above
-
-
-
UPS I/C PANEL ( BASEMENT FLOOR )
-
-
-
INCOMING
-
-
-
2 No. 400 Amp FP MCCB (35 KA)
-
-
-
2 No.AVF Meter with inbuilt selector switch.
-
-
-
2 Set of phase indicating lamps with Single Pole MCB.
-
-
-
2 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUS COUPLER
-
-
-
1 no 250 AMP FP MCCB
-
-
-
BUSBAR
-
-
-
500 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
5 Nos. 160Amp FP MCCB (35 KA).
-
-
-
Panel described as above
-
-
-
UPS O/G PANEL ( BASEMENT FLOOR )
-
-
-
INCOMING
-
-
-
4 No. 160 Amp FP MCCB (35 KA)
-
-
-
4 No.AVF Meter with inbuilt selector switch.
-
-
-
4 Set of phase indicating lamps with Single Pole MCB.
-
-
-
4 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
300 Amp TPN copper busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
7 Nos. 100Amp FP MCCB (35 KA).
-
-
-
3 Nos. 63Amp FP MCCB (35 KA).
-
-
-
Panel described as above
-
-
-
UPS PANEL-01 (BASEMENT FLOOR )
-
-
-
INCOMING
-
-
-
1 No. 100 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
6 Nos.40 Amp FP MCB (10 KA).
-
-
-
02 Nos.25 Amp FP MCB (10 KA).
-
-
-
Panel described as above
-
-
-
UPS PANEL ( 1ST TO 5TH FLOOR)
-
-
-
INCOMING
-
-
-
1 No. 100 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
06 Nos. 40 Amp FP MCB (10 KA)
-
-
-
04 Nos. 63 Amp FP MCB (10 KA)
-
-
-
Panel described as above
-
-
-
EMERGENCY LIGHTING PANEL ( UPPER BASEMENT FLOOR )
-
-
-
INCOMING
-
-
-
1 No. 100 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUSBAR
-
-
-
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
22 Nos.40 Amp FP MCB (10 KA).
-
-
-
02 Nos.25 Amp FP MCB (10 KA).
-
-
-
Panel described as above
-
-
-
LAUNDARY PANEL
-
-
-
INCOMING
-
-
-
1 No. 160 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUS BAR
-
-
-
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
10 Nos.63 Amp FP MCB (10 KA).
-
-
-
07 Nos.40 Amp FP MCB (10 KA).
-
-
-
Panel described as above
-
-
-
CSSD PANEL
-
-
-
INCOMING
-
-
-
1 No. 250 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUS BAR
-
-
-
250 Amp TPN aluminium busbar.
-
-
-
OUTGOING
-
-
-
09 Nos.63 Amp FP MCB (10 KA).
-
-
-
06 Nos.63 Amp FP MCB (10 KA).
-
-
-
Panel described as above
-
-
-
KITCHEN PANEL
-
-
-
INCOMING
-
-
-
1 No. 250 Amp FP MCCB (35 KA)
-
-
-
1 No.AVF Meter with inbuilt selector switch.
-
-
-
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
BUS BAR
-
-
-
250 Amp TPN aluminium busbar.
-
-
-
OUTGOING
-
-
-
08 Nos.63 Amp FP MCB (10 KA).
-
-
-
06 Nos.40 Amp FP MCB (10 KA).
-
-
-
08 Nos.25 Amp FP MCB (10 KA).
-
-
-
16 Nos.63 Amp DP MCB (10 KA).
-
-
-
12 Nos.40 Amp DP MCB (10 KA).
-
-
-
Panel described as above
-
-
-
EXTERNAL LIGHTING PANEL (OUTDOOR TYPE)
-
-
-
Supply, installation, Testing & Commissioning of Outdoor Type Panel with Front & Back double door, Top canopy, Mounting on Floor M.S. Stand etc totally enclosed free standing type water, moisture, dust and vermin proof Sub Distribution Board made out of 2.0 mm thick CRCA sheet complete with following equipments, including ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires/ cable, interconnection, painting etc as required.
-
-
-
INCOMING
-
-
-
1 No 100 Amp FP Moulded Case Circuit Breaker (35 KA) with 100 Amp 4 Pole Contactor & Timer.
-
-
-
1 No. Digital AVF Meter with inbuilt selector switch and CT' & SP MCB.
-
-
-
1 Set of phase indicating lamps.
-
-
-
1 Set of ON/OFF indicating lamps with SP MCB.
-
-
-
BUS BARS
-
-
-
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
OUTGOING
-
-
-
08 Nos. 25 Amp DP MCB (10 KA)
-
-
-
03 Nos. 40 Amp DP MCB (10 KA)
-
-
-
Panel described as above
-
-
-
FUEL HANDLING EQUIPMENT
-
-
-
Supply, Installation, Testing & Commissioning of 25 KL capacity mild steel horizontal cylindrical underground HSD tank (2.5M dia & 5.5M length) with shell 6mm and end plate 10mm thick suitable for underground installation complete with manhole accessories, fittings, piping inside the tank Decanting hose, bucket filter, foot valve etc. with paint with inside surface scrapped clean. Tank will be tested at works under hydrostatic pressure of 5 psi before being painted with two coats of Red Oxide Primer as required as per specifications.
-
-
-
Supply, fixing, testing and commissioning of M.S. heavy class ERW piping (Class-C) conforming to IS : l239 with necessary clamps, supports, anti vibration mountings, hangers and fittings such as bends, tees, reducers etc. painted as per specifications:
-
-
-
80 mm dia
-
-
-
40 mm dia
-
-
-
25 mm dia
-
-
-
VALVES & STRAINERS
-
-
-
Supply, Fixing and Testing of following valves, strainers, in the H.S.D. Fuel Handling System piping complete with companion flanges, nut bolts, gaskets, supports and painted etc. as per specifications :
-
-
-
Ball valves :
-
-
-
80mm dia.
-
-
-
40mm dia.
-
-
-
25mm dia.
-
-
-
Non return valves :-
-
-
-
40mm dia
-
-
-
Y-strainers :-
-
-
-
40mm dia.
-
-
-
80mm dia.
-
-
-
Supply, Laying, Testing & Commissioning of 1 No. 40mm dia M.S. heavy class ERW piping (Class-C) conforming to IS : 1239 complete with fittings such as bends, tees, reducer sets on surface/hume pipe or directly in ground including excavation, sand cushioning, 4 mm PYPCOT protective covering and refilling the trench etc. as required. In Ground / On surface
-
-
-
Supply and erection of canopy type M.S.Structure made out of 40mm medium class M.S. pipe (Class-B), 25 x 25 x 3 mm angle iron frame work and 14 SWG GI Sheet. Structure shall be grouted in C.C. 1:2:4 foundation for hanging 4 Nos. 9 litre each fire fighting buckets including providing buckets with two coats of anticorrosive paints etc. complete as required.
-
-
-
Supply & erection of 3 HP Flame Proof positive displacement type HSD pump inside the fuel tank yard having mechanical seal complete with all accessories, fixing on M.S. channel including making earthing as required. 110 LPM, Suction head not less than 3.5 m
-
-
-
Supply and fixing of flow meter for diesel line as required with Flow rate 10.3 to 11 mcu/hr
-
-
-
80mm dia.
-
-
-
25mm dia.
-
-
-
Supply, Installation, Testing & Commissioning of 16A TP Flame Proof out door type isolator switch, M.S. Stand, earthing etc complete as required.
-
-
-
Liasioning work for getting the HSD Yard layout drawing approval and licence / NOC from concern department.
-
-
-
Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes , all complete job as per direction of E/I.
-
-
-
Supply, Installation, Testing & commissioning of all in one integrated LED solar streetlight consists of solar photovoltaic module, battery, battery management system, control electronics, LED driver, inter-connecting cables and pole mounting piece integrated into the luminaire as a single unit. Solar street light with IP65 ingress protection having a system wattage of 35W with 6000 lumen output, 60Wp high efficiency monocrystalline solar panel, highly efficient MPPT based charge controller and 12.8 V, 30 Ah IP68 Lithium Ferro Phosphate(LiFePO4) battery with proper battery management system. LED lumen efficacy shall be at least 175lm/W and LED driver should have 90% efficiency. Typical correlated colour temperature should be 5700K with CRI70. It should ensure battery optimisation with help of a suitable dimming profile. The luminaire shall have inbuilt hybrid power supply option that can charge the battery during non sunny days automatically from the grid. The luminaire should be housed in IK 08 impact resistance certified aluminum pressure diecast housing with anti-corrosive coating and must have a UV stabilized polycarbonate cover. The luminaire shall have a specially designed pole mounting piece that enables lateral as well as post top mounting and installation at varying tilts from 0 to 15 degrees for optimal light distribution. LED luminous efficacy minimum 110lm/watt,solar panel 60Wor better ,battery bank minimum 12.8V 24 AH lithium ion with proper internal connections upto light/charge controller with high efficiency integrated mono Crystalline or poly crystalline solar panel with automatic. (Make: Philips/Signify cat No.-BRP710 LED60 CW or similar equivalents)
-
-
-
PLUMBING WORKS
-
-
-
Providing and fixing of 3 star water rated wall mounted European Water Closet including cistern, Flush plate with all accessories
Make Jaquar:
Cat. No.: FLSWHT-5953PPSM
Size (EWC): SIZE:355X555X370 MM
Size (CISTERN): 46 x 45 x 8 cm (JCS-WHT-2400)
-
-
-
Fixing, testing and commissioning CP Soap dispenser with CP brass wall brackets and CP brass screws complete as required DOLPHY RANGE:- 304 SS FINISH (1200 ML) CODE:- DSDR0146
-
-
-
Supply and installation of Kimberly-Clark Aquarius Multi Fold Paper Towel Dispenser 70220 - M Fold Paper Towel Dispenser - 1 X White Paper Towel Dispenser (23.2 cm x 28 cm x 11.6 cm)
-
-
-
Providing and fixing mirror of superior glass (of approved quality) and
of required shape and size with plastic moulded frame of approved
make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm
-
-
-
Providing, Fixing, testing and commissioning of C.P. PILLAR COCK AUTO CLOSING SYSTEM
Make Jaquar
Cat No.:PRS-CHR-031
-
-
-
Fixing, testing and commissioning C.P. HAND SHOWER (HEALTH
FAUCET) WITH 1 METER LONG EASY FLEX TUBE IN CHROME
FINISH & WALL HOOK complete in all respects as per direction of Engineer-Incharge - For All toilets
Make Jaquar
Cat No.: ALD-CHR-565
-
-
-
Providibng and fixing straight type Macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of McAlpine, UK with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector.
-
-
-
Providing and fixing CP brass single lever low flow Sink mixer with 15 mm CP brass single lever pillar cock with pop up and waste complete including cutting and making good the walls where required.
-
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing complete as required.
-
-
-
Providing & Fixing of Grab Bar size 300mm long in handicap toilet complete as required.
-
-
-
Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted coat hook on door complete. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge.
-
-
-
Providing, Installing & fixing storage type water heater of approved shade with copper container, glasswool insulation,stove enamelled M.S jacket, thermostatically controlled inner heater with pilot neon lamps, 15mm inlet stop cock valve, on inlet connection, 15mm dia C.P flexible connection pipe in inlet & outlet suitable for working pressure of 8 kg/sqcm complete as required.
-
-
-
Capacity 25 litres
-
-
-
Capacity 35 litres
-
-
-
Supply, installation, testing and commissioning built with Drinking Water R.O. unit with micron filtration pre-treatment unit, skid mounted R.O. module with pressure pump and pressure tank, drinking water cooler (High quality SS Tank for Storage 80 lts) , complete in all respects.
-
-
-
DRAINAGE WORK
-
-
-
Providing, Fixing, testing and commissioning of UPVC pipe SWR type 'B' conforms to IS : 13592-1992 with all fittings such as bends, tees, elbow, 'Y', offset, cleaning pipe door, clamps and steel structural supports etc. including cutting the floors, walls and making good the same in cement concrete 1:2:4 & cement mortar 1:4. The wall thickness of pipe and technical characteristic conforms to IS : 13592-1992 type 'B'. The fitting dimension conforming to IS : 14735-1999. The jointing to be completed with rubber ring joint/solvent weld joint. (soil waste and rain water pipe)
-
-
-
75 mm diameter pipe
-
-
-
100 mm diameter pipe
-
-
-
160 mm diameter pipe
-
-
-
Providing, Fixing, testing and commissioning of UPVC 'P' trap/floor trap/urinal trap of self cleansing design with or without horn conforming to IS : 14735-1999 including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size) cutting and making good the walls & floors. 110 mm (OD) x 110 mm (OD)
-
-
-
Providing, fixing & testing uPVC pipes, conforming to IS 4985 class 3 (6 kg/cm2) including injection moulded fittings, jointing with solvent cement, cutting and making good the floors and walls and jointing to trap/waste pipe, complete of outer dia. (Indirect waste) 40 mm diameter pipe
-
-
-
Providing, Fixing UPVC floor drain including all fitting and accessories fixed in cement mortar complete in all respect. 110 mm OD x 63 mm OD
-
-
-
Providing, fixing and testing of uPVC SWR inlet fittings with two or three saddle inlets of 40, 50 or 75 mm size, fabricated from 110 mm outer dia uPVC pipes and fixed to uPVC traps with solvent cement joint complete in all respect.
-
-
-
Providing & fixing uPVC clean out plug with suitable opening with threaded uPVC socket fixed to uPVC pipe joints as required complete in all respects. 110 mm dia
-
-
-
Providing and fixing Bronze compact(Screwed) Diaphram type pressure reducing valve (PRV) with strainer deliverying desired rate of flow. The complete system is tested to a pressure not less than 16 Kg / Sq.cm and suitable to reduce the pressure upto 1 Kg/Sq.cm) including flanges / unions, nuts, bolts and washers complete as required.
-
-
-
15 mm dia
-
-
-
20 mm dia
-
-
-
25 mm dia
-
-
-
32 mm dia
-
-
-
40 mm dia
-
-
-
50 mm dia
-
-
-
Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Under Ground Overhead Tanks.)
-
-
-
25mm dia pipe, 600mm long with size of 250x250x6 mm MS plate
-
-
-
32mm dia pipe, 600mm long with size of 250x250x6 mm MS plate
-
-
-
40mm dia pipe, 600mm long with size of 300x300x6 mm MS plate
-
-
-
50mm dia pipe, 600mm long with size of 300x300x6 mm MS plate
-
-
-
65mm dia pipe, 600mm long with size of 350x350x6 mm MS plate
-
-
-
80mm dia pipe, 600mm long with size of 400x400x6 mm MS plate
-
-
-
100mm dia pipe, 600mm long with size of 400x400x6 mm MS plate
-
-
-
150mm dia pipe, 600mm long with size of 450x450x6 mm MS plate
-
-
-
200mm dia pipe, 600mm long with size of 450x450x6 mm MS plate
-
-
-
Providing, Fixing, Testing & Commissioning of nitrle rubber insulation on hot water supply pipes. K-Flex, A-Flex, Armacell. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge.
-
-
-
15mm (9 mm thickness)
-
-
-
20mm (9 mm thickness)
-
-
-
25mm dia (9 mm thickness)
-
-
-
32mm dia (13 mm thickness)
-
-
-
40mm dia (13 mm thickness)
-
-
-
50mm dia (13 mm thickness)
-
-
-
65mm dia (19 mm thickness)
-
-
-
Solar Water Heating System-500 LPD (Location Terrace OPD BLOCK)
-
-
-
Providing and fixing Solar Hot Water indirect Heating System using heating liquid medium comprising of flat plate solar panels, including all interconnecting insulated G.I. piping, primary and secondary recirculation pumps, pressure type insulated hot water tank, , outlet, Y stainer and a water meter on the inlet, air release valve all mounted on galvanized MS sections complete with connection with the existing piping. Comparising of following:-(location Terrace)
-
-
-
Five Nos of. flat plate solar collector panels of 8 Sqm size approx. the panels enclosed in insulated collector boxes with single piece toughned glass 4 mm thick and fixed with heat resistant gasket.
-
-
-
One No. Integrated heat exchanger with drain down vessel 9 Ltrs. Capacity,designed so as to provide heat exchange between solar collectors and 500 ltr tank complete with drain down tank. The cold water heated after passing through heat exchanger to be stored in hot water tank. Necessary pumps and controller for automatic operations to be provided. including MS painted frames for the same.
-
-
-
M.S Horizontal hot water mixing tank of 500 ltr capacty shall be made out by of 4mm thick M.S. plate and inside lining of 1.0 mm thick stainless steel grade 316 sheet , out side steel primer including 50 mm thick rock wool slab insulation (density of glass wool 64 Kg/Sqm.) & 24 SWG aluminum sheet cladding outside the tank. Tank shall be provided with flanges for inlet outlet, over flow/ drain connection & Vent pipe with M H cover of 450 mm internal dia., Temperature and pressure release valve should be on top of water storage tank All the valve & accessories shall be suitable for an operating pressure of 6.0 kg/sqm including electric back up of 1 x 4.5 KW
-
-
-
Primary circulation pump 2 Nos (1W+1S) for circulation of fluid from Solar panels to heat exchanger.
-
-
-
Secondary circulation pump 2 Nos (1W+1S) for circulation of fluid from heat exchanger to hot water mixing tank.
-
-
-
One Lot of Inter-connected insulated G.I. piping insulated with 9 mm thick nitrile rubber heat resitant insulation sections ( Vidoflex or equiv.) and valves with outer mechanical protection of aluminium sheet cladding.
-
-
-
Solar Water Heating System as Describe Above
-
-
-
Supply , instalation, testing & commissioning of Cubical type branch distribution boards( BDB) of the following types made out of 14 gauge (2 mm thick) CRCA sheet complete with the accessories i/e. interconnections with suitable copper solid strip connections 100 A & above and with copper wires below, painting etc. and complete with supplying & fixing the following boardsetc. as required.
-
-
-
Branch Distribution Board for 500 LPD System
-
-
-
1 No. 125 AMP rating TP Modulded case circuit breakers with neutral link, front operated handle & thermal magneticrelease (35 Ka)
-
-
-
1 Set 125 Amp 4 Bars Tinned Cu. Bus Bar
-
-
-
1 Set LED type Indication lights
-
-
-
1 No. Digital Voltameter (0-500 V)
-
-
-
1 No. Digital Ammeter (0-125 A )
-
-
-
1 Set CTs for Ammeter 125/5 A ratio
-
-
-
2 Nos. Selector Switched for Voltmeter & Ammeter
-
-
-
3 Nos. 2 A SPMCB
-
-
-
Outgoing
-
-
-
08 Nos 25 A TP MCB , 10 KA (6+2 Spare)
-
-
-
06 Nos. Auto DOL Starter for 0.5 KW motor. Each shall have Auto/ Manual selector switch, over load relay, single phasing preventor, ON/OFF/ Trip indication lamps, ON/OFF push Buttons, contactor.
-
-
-
03 Nos 63 A TP MCB , 20 KA for Electric back up supply.
-
-
-
The System is based on temprature difference and the system will operate automatically based on thermostat for startup and shutdown of Primary,Secondry, Receiculation pump and Heating elements on temprature differential.
-
-
-
Electric Panel as Describe Above.
-
-
-
HOT WATER GENERATION SYSTEM (OPD BLOCK)
-
-
-
Supply, installion, testing and commissioning of Hot Water Generation Plant with Packaged type Air to Water Heat Pump. These units shall be completely factory assembled including 2 Nos. Scroll Hermatically Sealed Scroll Compressor(s), evaporator, Condenser and Microprocessor Control Panel etc with R410 Referigerant and COP between 3-4. The Heat Pump shall have inbuilt hot water heat exchanger, pumps, valves. expansion valve, integrated CIP system and other accessories.The Heat Pump should be capable of producing hot water at minimum 60°C temperaure at outlet (condenser circuit) temperatures at 10°C ∆T. The Machine should have an operating ambient temperature range of 5°C to 40°C. Location: Terrace Level
-
-
-
a. Built in electric panel as per safety norms as manufacturer standard.
-
-
-
b. All other mountings, fittings & controls with all accessories and safeties
-
-
-
c. All other mounting, fittings and controls.
-
-
-
d. Suitable for electric supply of 415 + 10% volts & 50 Hz.
-
-
-
e. All interconnecting wiring / cabling between heat pump and electrical panel.
-
-
-
f. The Heat pump shall have an in-built facility to start / stop depending on variation in demand at different periods.
-
-
-
g. System shall be complete with SS 304 Tank of 2 Hrs Storage Capacity, Primary and Seconary Circualtion pumps, Heat Exchangers, Return Recirculation Pump, interconnecting piping, valves and all accessories as required.
-
-
-
h. System shall have 20% of total capacity in electrical heating as standby.
-
-
-
i. System shall have an integrated Solar Heating system with 20% of total capacity for energy saving including Flat Plate Solar Panels, Mixing Tanks, Recirculation Pumps, etc
-
-
-
following capacity required for block wise specification as same for all Heat pump.
-
-
-
For OPD Block
-
-
-
Heating capacity : Approx. 200 KW (100 KW x 2 working + 0 standby)
-
-
-
SS 304 Hot Water Storage Tank : 5000 Ltrs x 1 Nos
-
-
-
Solar Water Heating 20% - 52 Flat Plate Collector with 1000 Lit tank with coil
-
-
-
Reverse Osmosis Plant (RO) Hospital Block- suitable for 10 hrs operation including filter feed pumps,multigrade sand filter, activated carbon filter, antiscalant dosing, acid dosing, micron cartridge filter, RO high pressure pumps, RO moules, RO Cleaning System, valves, interconnected piping and accessories.
-
-
-
Expected Treated water characteristics after RO Treatment
-
-
-
PH - 6.0-7.0
-
-
-
Total dissolved Solids - 50 ppm
-
-
-
Suspended Solids - NIL
-
-
-
Turbidity - As per IS:10500
-
-
-
Iron as Fe - NIL
-
-
-
Total Harness - Less Than 5 ppm
-
-
-
Permeate water quantity = 500 lit/hr. described above (a) to (m).
-
-
-
following capacity required for block wise specification as same for all Heat pump.
-
-
-
500 LPH RO FOR OPD BLOCK
-
-
-
HYDRO-PNEUMATIC SYSTEM (OPD BLOCK)
-
-
-
Supply, Installation, Testing And Commissioning Of Compact Self Contained Skid Mounted Hydropneumatic System (Variable Speed) As Follows:
-
-
-
a. Vertical, In-Line, Multisage, centrifugal pumps with SS-304 casing and impeller and SS-316 shaft, CI base & head TEFC motor (with mechanical seal)
-
-
-
(Vendor to submit performance curves and technical catalog of the proposed model for review & information)
-
-
-
The pump shall be selected for performance at best efficiency point. However, the pump selection shall be suitable for performance with set point @ + 20% of the rated head.
-
-
-
b. External Pump mounted or wall mounted microprocessor PID controller(VFD) and frequency inverter integrated in a single body or as separate components with pressure sensor transmitter minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocall through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equiped with dry running protection
-
-
-
Quantity : 1 No.
-
-
-
c. Complete (Skid mounted wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor)
-
-
-
d. Precharged diaphram pressure vessel with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete.
-
-
-
e. Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. complete.
-
-
-
f. Accessories like pressure gauge, MS base frame (Synthetic enamel painted over a coat of primer)
-
-
-
g. GI suction and delivery header with flanges for inlet connection, common outlet header with flanges for outlet connections as required, and interconnecting piping with flexible connections, eccentric type reducers etc. all necessary indigenous accessories as required to complete the installation. Sluice valves at inlet and butterfly valves at outlet, strainer at inlet and NRV at outlet of all pumps shall be provided.
-
-
-
Note:Contractor to note that the suction header is required to have inlet connection from the Puddle Flange @ water tanks and to the pump suction. Provision of delivery header is required to have outlet connection from the pumps. Suitable outlet flanges from the delivery mainfold / header shall be provided as required.
-
-
-
Domestic Booster system for Hospital at terrace as follows:
-
-
-
No. of pumps (2 Working + 1 Standby)
-
-
-
Water Flow Rate - 300 LPM Each
-
-
-
Head - 30 M
-
-
-
WATER SUPPLY, DRAINAGE PUMPS & WATER TREATMENT EQUIPMENTS.
-
-
-
Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 90 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required.
-
-
-
Hyd. System for Domestic Water Supply Pump
-
-
-
Flow rate : 150.0 LPM each
-
-
-
Pumping Head - 60/65 m
-
-
-
1 Set = 2 Nos. pump (1 working+1 standby)
-
-
-
Approx H.P. - 5 HP or as per manufacturer recommendation.
-
-
-
Location - UGH Pump Room
-
-
-
Hyd. System for Flushing Water Supply Pump
-
-
-
Flow rate : 75.0 LPM each
-
-
-
Pumping Head - 65/70 m
-
-
-
1 Set = 2 Nos. pump (1 working+1 standby)
-
-
-
Approx H.P. - 3 HP or as per manufacturer recommendation.
-
-
-
Supplying, installing, testing and commissioning of SS vertical centrifugal pump. Each pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft / Impeller / Intermediate chamber along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, stainer (with by-pass) at suction. Pump shall be provided with mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve (25 dia). The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary ancillaries, starter panel / control panel & accessories including base plate complete as required.
-
-
-
The entire Hydropneumatic system shall be factory fitted.
-
-
-
Filter feed pump
-
-
-
Flow rate : 150.0 LPM each
-
-
-
Pumping Head - 35 m
-
-
-
1 Set = 2 Nos. pump (1 working+1 standby)
-
-
-
Approx H.P. - 2.5 HP or as per manufacturer recommendation.
-
-
-
Irrigation Pump
-
-
-
Flow rate : 100.0 LPM each
-
-
-
Pumping Head - 35 m
-
-
-
1 Set = 2 Nos. pump (1 working+1 standby)
-
-
-
Approx H.P. - 1.5 HP or as per manufacturer recommendation.
-
-
-
Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge.
-
-
-
(Pumps shall be installed in a set of two pumps One working and One standby)
-
-
-
Basement & Pump Room Drainage Pumps
-
-
-
(Pumps to be suitable to handle solids upto 12 mm size)
-
-
-
Capacity - 5.0 LPS (Each)
-
-
-
Head - 20 M
-
-
-
H.P. - 2.0 HP Approx.
-
-
-
Sewage Sump Pumps
-
-
-
(Pumps to be suitable to handle solids upto 40 mm size)
-
-
-
Capacity - 5.0 LPS (Each)
-
-
-
Head - 20 M
-
-
-
H.P. - 3.0 HP Approx.
-
-
-
Providing, fixing, testing & commissioning of vertical MSEP filter with adequate dirt holding capacity. Fabricated from FRP sheet as per IS-2825 and manufacturer's specifications complete with intitial charge filter media including painting inside with two coats of non toxic epoxy and with one coat of zinc chromate two coats of synthetic enamel paint outside. Including concrete foudation with cement plaster complete as required. The filter shall also be provided with set of internals for raw water inlet and bottom collecting system. Complete with frontal piping (heavy) . it is designed on 1.50 m / sec velocity.
-
-
-
Dual Media Filter For Domestic Water Supply
-
-
-
Capacity- 9000 LPH
-
-
-
Filtration rate- 6000 LPH/Sqm.
-
-
-
Filter dia approx. - 1000 MM
-
-
-
Working pressure: 3.0 Kg/sq cm.
-
-
-
Test pressure : 4. 5 Kg/sq cm
-
-
-
Activated Carbon Filter For Domestic Water Supply
-
-
-
Capacity- 9000 LPH
-
-
-
Filtration rate- 6000 LPH/Sqm.
-
-
-
Filter dia approx. - 1000 MM
-
-
-
Working pressure: 3.0 Kg/sq cm.
-
-
-
Test pressure : 4. 5 Kg/sq cm
-
-
-
Supply Installation,Testing & Commissioning of metering pump type chemical doser with 100 lits. HDPE chemical grade solution tank,injection fitting assembly,suction and delivery hose upto the point of injection, capacity 0-6 lph, complete in all respects. Chlorination of Domestic Water
-
-
-
Design, manufacture, supplying, fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick mild steel sheet, free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts.
-
-
-
All switchboards shall have provision for entry of cables from the top or bottom as required.
-
-
-
All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position.
-
-
-
Electric Panel For Water Supply Pumps at Water Supply Pump Room
-
-
-
INCOMING
-
-
-
1 No. 63 amps TPN MCCB with the following accessories:
-
-
-
1 No. square flush mounting 0-500 volts scaled voltmeter with three way and OFF switch.
-
-
-
Three phase indicating lights.
-
-
-
Electrolytic high conductivity three phase and neutral tinned copper bus bar rated at 100 amps having a current density of 1 amp per Sqmm suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The neutral bus bar is to be of 100% capacity.
-
-
-
OUTGOING UNITS
-
-
-
Ten 25/40 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA
-
-
-
Two 63 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA
-
-
-
8 Nos. fully automatic DOL starters with push buttons and ON/OFF indicating lights and overload relays for 1.5 to 7.5 HP pump .
-
-
-
8 Nos. rotary selector switch for selecting mode of operation i.e. auto/manual/off.
-
-
-
6 Nos.cyclic relay for automatic duty changeover of pumps.
-
-
-
8 No. single phase preventors.
-
-
-
8 Nos. square flush mounting 0-30 amps scaled ammeters with three way and OFF selector switch.
-
-
-
Space for 3 Nos. Level Controllers.
-
-
-
Switchgear shall be suitable for the HPS of various motors.
-
-
-
1 Nos. 63 Amp. TPN MCB Spare.
-
-
-
2 Nos. 32/40 Amp. TPN MCB Spare.
-
-
-
The motor control panel shall be prewired with colour coded wires with identification labels complete in all respects as required.
-
-
-
Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to probes of required.
-
-
-
Level Controller For Water Supply Pump:
-
-
-
To start pump when water level is low in Domestic Water U.G. tank and shut off pump when Domestic Water U.G. tank is full. Also to stop when water level is low in raw water underground tank.
-
-
-
Level Controller For Sump Pumps:
-
-
-
To start pump when water level is high in sump and shut off pump when sump is empty. Both pumps are start when sump is over flowing.
-
-
-
Providing and fixing GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete.
-
-
-
50 mm dia
-
-
-
65 mm dia
-
-
-
80 mm dia
-
-
-
100 mm dia
-
-
-
150 mm dia
-
-
-
Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 16 Kg/Sqcm.
-
-
-
50 mm dia
-
-
-
65 mm dia
-
-
-
80 mm dia
-
-
-
Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.
-
-
-
Power cable Copper 3 core 10 sq.mm
-
-
-
Power cable Copper 3 core 6 sq.mm
-
-
-
Power cable Copper 3 core 4 sq.mm
-
-
-
Control cable copper 2 core 1.5 sq.mm
-
-
-
GRP (SMC) Panel tank
-
-
-
Supply & installation of GRP (SMC) Panel tank confirming to IS 14399 (PART 1 & 2) : 1996 & IS 4249 : 1967
-
-
-
6LX5BX2H - 60KL
-
-
-
5LX5BX2H - 50KL
-
-
-
5LX3BX2H - 30KL
-
-
-
EXTERNAL WATER SUPPLY
-
-
-
Providing, laying, Jointing, Testing and commissioning of uPVC pressure pipes of 10Kg/Sqcm pressure rating class 5 (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 50m complete, compaction and consolidation Including laying cement concrete 1:2:4 alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design.
-
-
-
25 OD mm.
-
-
-
32 OD mm.
-
-
-
40 OD mm
-
-
-
50 OD mm
-
-
-
63 OD mm
-
-
-
EXTERNAL SEWERAGE & DRAINAGE INSTALLATIONS UPTO MAIN ROAD FIRST MANHOLE
-
-
-
Providing and fixing F.R.P. Grating drain cover M.S. Angle ( 35 x35 x 5 mm). ( Load Bearing cap. 5 T, suitable for car parking, basement, Pump room, Parking Area ). 377mm wide and 30mm thick
-
-
-
Sewage Treatment Plant 105 KLD ( MBBR Technology OPD BLOCK )
-
-
-
Note : All Civil Works with Structural Walk Ways/ Railings, General Lighting and Ventilation to be Done by contractor.
-
-
-
Design, Supplying, installing, testing & commissioning of Sewage Treatment Plant of 105 KLD (excluding excavation, back filling & disposal of surplus earth MS / Civil construction work) for the following duty:
-
-
-
Sewage treatment plant shall include the following items:
-
-
-
a. Screen chambers with SS Screen
b. Equalization Tank
c. Aerobic & Anoxic tank
d. MBBR TANK e. Air Blowers
f. MBBR Media g. Recirculation pumps, backpulse pump, permeate pump etc.
h. Dewatering system
j. Electrical Panel, Cabling (Power & Control), Earthing
k. Tertiary Treatment
l. Clear Water tank and Flushing Water tank.
m.UF System
-
-
-
INLET SEWAGE CHARACTERSTICS (ASSUMED)
-
-
-
pH - 6.0 – 8.5
-
-
-
BOD5 : 250 - 350 mg/lit
-
-
-
Total Suspended Solids (TSS) : 250 - 450 mg/lit
-
-
-
COD : 500 - 700 mg/lit
-
-
-
Oil / Grease : upto 50 mg/lit
-
-
-
Inflow time : 24 HRS
-
-
-
Peak factor : 3
-
-
-
Temperature : Ambient
-
-
-
Desired Sewage Quality After Treatment
-
-
-
pH : 7 - 8
-
-
-
BOD5 : 10 mg/lit
-
-
-
Total Suspended Solids (TSS) : 10 mg/lit
-
-
-
COD : 50 mg/lit
-
-
-
Oil / Grease : 5 mg/lit
-
-
-
Colour : Colourless
-
-
-
Odor : unobjectionable
-
-
-
E.coli : Nil
-
-
-
NH4-N : 5 mg/lit
-
-
-
N Total : 10 mg/lit
-
-
-
PO4-P : 2 mg/lit
-
-
-
Note:
-
-
-
Vendor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the STP for the full capacity.
-
-
-
Effluent Treatment Plant 20 KLD (OPD )
-
-
-
Design, Supplying, installing, testing & commissioning of Effluent Treatment Plant of 20 KLD (excluding excavation, back filling & disposal of surplus earth and Civil construction work) for the following duty: (OPD BLOCK)
-
-
-
Effluent from OT Scrubs, blood bank, labs etc. Some solvent/ chemical waste originating typically from hospital complex shall also be discharged into the ETP. Design to take consideration of same.
-
-
-
INLET EFFLUENT CHARACTERSTICS
-
-
-
PH : 5.5 - 9.0
-
-
-
BOD : 250 - 600 mg/l
-
-
-
S. Solids : 200 - 650 Mg/l
-
-
-
COD : 600 - 1200 mg/l
-
-
-
Oil & Grease : 50-140 mg/L
-
-
-
Effluent discharge standard after treatment
-
-
-
pH - 6.0 – 8.5
-
-
-
BOD - Less than 150 Mg/L
-
-
-
S. Solids - Less than or equal to 100 Mg/L
-
-
-
COD - Less than or equal to 300 Mg/L
-
-
-
Oil & Grease - Less than 5 Mg/L
-
-
-
Effluent treatment plant shall include the following items:
-
-
-
Screen Chamber
-
-
-
Equalization tank/sump
-
-
-
Primary Tube Settler
-
-
-
Dosing System
-
-
-
Sludge Holding Tank
-
-
-
UV System
-
-
-
Air Blowers, Pumps & equipment
-
-
-
Piping, valves etc
-
-
-
Clarified Water tank
-
-
-
Electrical Panel & Cabling
-
-
-
Note:
-
-
-
Contractor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the ETP for the full capacity.
-
-
-
FIRE FIGHTING WORKS
-
-
-
Supplying,Installation,testing & commissioning of dust & vermin proof double door with canopy type taperd roof wall / floor mounted compartmentlised feeder piller type cubical control Panel for fire fighting terrace pump of front area not less than 1.0 Sqmtr. and depth not less than 300 mm, made out of 2mm thick CRCA sheet with 100 Amp. 4 strip aluminium bus bars with front openable door & locking arrangement, interconnection, control wiring, intrigation with pressure switch i/c suppying & fixing following switchgears & control gears/starters etc. as required.
-
-
-
Incomming
-
-
-
63 Amps. TP & N SFC with HRC fuses
-
-
-
Voltmeter (0-500 Volt) with selector switch.
-
-
-
Ammeter (0-60 Amps.) with selector switch & CTs.
-
-
-
Set of 3 phase indication lamp
-
-
-
Suitable HP fully automatic Star/Delta Starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation.
-
-
-
Selector switch for local/remote, auto/manual/off operation ON/OFF indication etc.
-
-
-
Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge.
-
-
-
PIPES & ACCESSORIES
-
-
-
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground )
-
-
-
100 mm. Dia
-
-
-
80 mm. Dia
-
-
-
Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.
-
-
-
Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & "FIRE HOSE" written on front.
(Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE )
-
-
-
Providing and fixing hose cabinet of size 750mmX600X250mm made of 16 gause thick MS sheet with 4 mm thick float glass doors in front painted "FIRE" in red paint i/c recessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15 mtr. long hose pipe. 1 no. brach pipe mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant. as directed by Engineer-in-Charge.
-
-
-
Pressure Vessel
Supplying, installing, testing and commissioning of pressure vessel for pressurization of fire system complete with valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, outside with one coat of primer & two coats of synthetic enamel paint of approved shade complete as required to operate commonly main fire pump, sprinkler pump & jockey pump at drop of pressure, automatically at required pressure setting. Complete as per manufacturer's specifications & as directed by Engineer- in-charge. working pressure:- 11 kg/sqcm test pressure: 20 kg/sqcm
-
-
-
(450 mm dia & 2000 mm height)
-
-
-
Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges.
-
-
-
150 mm dia
-
-
-
80 mm dia
-
-
-
Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting & gland of superior quality having minimum working pressure of 16 kg/sqcm. 25 mm Dia
-
-
-
Providing and fixing 25 mm dia inspection & testing assembly with gun metal ball valve, gun metal sight glass ,Reducer ,union, G.I PIPE. connection to drain pipe/riser.
-
-
-
Providing & fixing cast iron 100 mm dia. Foot valve with nuts, bolts, 1.5 mm thick CAF gasket complete with all accessories (To be provided into UG Fire Water Tanks).
-
-
-
Supply and fixing of 4 Nos G.I round bottom FIRE BUCKET of 9 LTR. Capacity field with sand including proper supporting /mounting arrangement MS Angle Iron Frame painted by fire red colour over 2 coats of red oxide paint and written with white paint FIRE complete in all respects as per direction of Engineer Incharge .
-
-
-
Providing, fixing water flow meter on test line complete with all accessories for flow indication , monitoring & testing of fire pumps with bypass arrangment including piping & bypass valves.c150 mm dia
-
-
-
FIRE EXTINGUSHER
-
-
-
Providing and Fixing of CO2 Portable 4.5 Kg Fire extinguisher, Carbon-Dioxide type Flat base Horn Including Valve, High Pressure Rubber Wire Braided Discharge Hose of not less than 10 mm dia. & complete in all respects including initial fill with CO2 Gas confirming to IS:15222. and IS 15683:2018 Marked.
Location : Inside FHC, Parking Area, Electrical Room, Pump Room,
-
-
-
Supply & Fixing of 6 Kg ABC MAP-50% Powder based Fire Extinguisher, Applicable Fire Class A, B & C, EPDM Rubber Hose, NRV Valve and Helium Leak Detection Tested, Internal Coating - Epoxy Powder and External Pure Polyester Powder Coated (UV resistant), IS 15683:2018 Marked.
Location : Open General Area, Inside FHC, Parking Area, Basement
-
-
-
Supply & Fixing of 9 Kg ABC MAP-50% Powder based Fire Extinguisher, Applicable Fire Class A, B & C, EPDM Rubber Hose, NRV Valve and Helium Leak Detection Tested, Internal Coating - Epoxy Powder and External Pure Polyester Powder Coated (UV resistant), IS 15683:2018 Marked.
Location : Open General Area, Inside FHC, Parking Area,
Basement
-
-
-
Providing and Fixing of Portable 4kg Clean Agent HFC-236fa Fire Extinguisher, Gas UL Listed under EPA SNAP, EPDM Rubber Hose, NRV Valve and Helium Leak Detection Tested, Internal Coating - Epoxy Powder and External Pure Polyester Powder Coated (UV resistant), Suitable for Class A,B and C & Electrically Started Fires, Conforming to IS 15683:2018 Marked.
Location : General Office Area, Inside of Critical Rooms
i.e. Server Room, UPS Near Rooms, Fire Control Room etc.
-
-
-
Providing, fixing of 60 Ltr Mechanical Foam (AFFF-6%, Confirms to IS 4989 (Part-II), Trolley Mounted Fire Extinguishers, Fitted with 4 Metre EPDM Hose with SS Spring of 300mm & Air Aspirated Nozzle, CO2 Gas Cartridge of 300 Grams. Confirms to IS 4947, Brass Forged Cap, including all accessories complete in all respect. Applicable on Class A & B Fire, IS 16018:2012 Marked & CE Approved.
Location : Near HSD Tank, DG Area
-
-
-
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc.
-
-
-
HVAC WORK
-
-
-
AHRI CERTIFIED CENTRIFUGAL WATER COOLED CHILLING MACHINE
-
-
-
Supply, installation, testing and commissioning of Water Cooled Centrifugal Chilling M/C of 425 TR actual capacity at below mentioned operating conditions with R-134 A refrigerant, open / semihermatic / hermatically sealed Centrifugal compressor, direct / gear driven by suitable KW Sq. Cage induction motor complete with variable speed drive, water-cooled shell & tube condenser, insulated shell and tube flooded chiller, flow switches at condenser & chiller outlet, refrigerant piping, Refrigerant and Oil (First Charge), flexible pipe connector at condenser & chiller inlet / outlet, integral lubrication system, Microprocessor based control panel, factory supplied chiller mounted / floor standing Variable Speed Drive(VSD) & accessories etc. all mounted on M.S. frame. Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 400+/-10% volts, 50Hz, A.C. supply. The Unit shall be mounted IP 54 rated VFD Starter of suitable capacity. The chilling m/c as described above shall be in line with specifications & shall have interface card compatible with BMS system.
-
-
-
Twin rotor based semi-hermetic type single/ multiple horizontal compressor complete with automatic capacity control from 100%-20%, safety switches, forced feed lubrication system etc., as per specifications. 1 no. - matching shell & tube flooded/falling film type even water pass chiller for Centrifugal type units of MS shell and copper tubes and pressure drop not exceeding 10.0 meters as per CPWD Specifications. Evaporator and condenser shall be manufactured, tested and stamped with ASME(U) pressure vessel code.
-
-
-
All Chiller shall be tested at 4 points at 100%, 75%, 50% and 25% at AHRI conditions at manufacturer test bed before dispatch.
-
-
-
Manufacturer’s AHRI Certified Selection Performance Sheet to be submitted to evaluate and verify the specified performance parameters.
-
-
-
Water flow switches at outlet of condenser & chiller, water drain, air purge valves, thermometers and pressure gauges wherever required.
-
-
-
Initial/first charge of refrigerant gas & compressor oil shall be factory charged. Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications, liquid level control etc.
-
-
-
Frame work for mounting the above condenser, chiller compressor and motor with base plate complete with anti-vibration pads/springs. RCC / cement concrete foundation for the chilling unit.
-
-
-
CONDENSOR SIDE
-
-
-
CDW IN - 32.22º C.
-
-
-
CDW OUT - 37.77º C.
-
-
-
FLOW - 4720 LPM
-
-
-
Fouling Factor (MKS) - 0.0002
-
-
-
Pressure Drop Max - 8.5 Meter
-
-
-
CHILLER SIDE
-
-
-
CHW IN - 12.77º C.
-
-
-
CHW OUT - 6.11º C.
-
-
-
FLOW - 3775 LPM
-
-
-
Fouling Factor (MKS) - 0.0001
-
-
-
Pressure Drop Max - 7.5 Meter
-
-
-
IKW / TR (Maximum) - 0.68
-
-
-
ARI Certified Centrifugal Water Cooled Chilling Machine With Variable Speed Drive & Microprocessor Based Control Panel Of Capacity 425 TR (4W + 1S) The price quoted for supply, installation, testing & commissioning of Centrifugal Chilling Unit shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.
-
-
-
CHILLER PLANT OPTIMISER
-
-
-
Supply, installation, testing and commissioning of 64 bit, UL Listed BACnet (BTL certified) Supervisory Controller for management level interface in MS Mild Steel Enclosure powder coated grey colour for SUPERVISORY CONTROLLER, IO CARDS (with accessories like Transformer, MCB, internal wiring and Relays with bases) (A) The Network supervisory Controller shall have imbedded graphic capability for generating web based user graphics and support Multi user with simultaneous minimum 4 user login facility (B) Unlimited user without additional license (C) Shall be browsed by Microsoft Internet Explorer and Netscape Navigator (D) BTL certified (E) Web engine should be 64 bit configuration (F) Should have inbuilt IO points (G) Functionally able to act as a DDC controller also apart from Supervisory controller function (H) Web engine should support ASHRAE standard BACnet MS/TP protocol, Proprietary Protocol shall not be accepted (I) Web engine should support integration of third party protocol ( eg Modbus-RTU) seamlessly without adding additional hardware (J) Web engine should support DHCP function for IP addressing.
(K) All Peripheral Systems required to complete the work of CPO.
-
-
-
All equipment in the Centralized Chilled Water Plant Shall be Controlled through Chiller Plant Optimiser.
-
-
-
All field devices and sensors required for the operation of CPO shall be paid separately under BMS BOQ
-
-
-
All Cables used for the CPO shall be screened LSZH type. The cables, conduits, cable tray & glands will be paid separately as per actual measurements in Electrical BOQ.
-
-
-
PRIMARY CHILLED WATER PUMPS
-
-
-
Supply, installation, testing and commissioning of End Suction chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, vibration isolators, SS Shaft, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation. (4W+1S)
-
-
-
Capacity of Each Pump (LPM) 3775
-
-
-
Pump Head (Mt) 15.00
-
-
-
Motor HP 25.0
-
-
-
Minimum Efficiency 70 %
-
-
-
Chilled Water Pump Sets (4W+1S) as mentioned above. The price quoted for supply, installation, testing & commissioning of imported Pumps shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.
-
-
-
SECONDARY CHILLED WATER PUMPS
-
-
-
Supply, installation, testing and commissioning of End Suction chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, vibration isolators, SS Shaft, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation. Secondary chilled water pumps shall be suitable for operation on adjustable frequency drives & conforming to the specifications of variable speed pumping system.
-
-
-
Capacity of Each Pump (LPM) 3775
-
-
-
Pump Head (Mt) 33
-
-
-
Pump Motor HP 50
-
-
-
Minimum Efficiency 80 %
-
-
-
Working + Standby 3+1
-
-
-
Chilled Water Pump Sets (4W+2S) as mentioned above. The price quoted for supply, installation, testing & commissioning of imported Pumps shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.
-
-
-
VARIABLE SPEED PUMPING SYSTEM
-
-
-
Supply, installation, testing and commissioning of Variable Speed Pumping system consisting of four numbers 50 HP adjustable frequency drive (AFD) suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc. complete with other accessories as required.
-
-
-
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees. (For Chilled Water Secondary Pump & Condenser Water pump)
-
-
-
AIR SEPARATOR
-
-
-
Supply Installation Testing and Commissioning of In-line Air & Dirt Separator. removing of free air, bubbles and microbubbles in combination with separation and removal of dirt particles within chilled water system.
The acceptable design shall incorporate a separating element to force water into tranquillity zones for air and dirt removal. A nozzle shall force de-aerated water into the main flow to divert contaminated water through the separating element.The use of tube mesh and wire mesh made of copper or any metal is not permitted for separation purpose, wire mesh/tube increases the pressure drop and maintenance requirement. A high capacity, conical brass automatic air vent shall be installed on the top of the vessel for air discharge. Drain valve for removal of floating debris and dirt. Heavier than water dirt particles shall be removed via a blow down valve on the base of the vessel whilst ferrous particles down to 4 µm shall be captured by a magnetic device(25 Neodymium Supermagnets) in the lower part of the vessel.
It shall be able to remove at least 15% of 70 µm microbubbles per cycle and at least 35% of 150 µm dirt particles per cycle. Manufactured and designed in accordance with European Pressure Equipment Directive PED 97/23/EC. Material shall be EN/ISO: S235JR+N. The Microbubble Air and Dirt Separator shall be sized appropriate to the maximum operating pressure of the system. Inlet and outlet of the unit (Dia-250 mm.) shall be via horizontally-opposed, coaxial flanged connections in accordance with EN 1092-1 PN 16. Suitable for glycol solution upto 50%, Temperature range -10 C to 120 C Line Size:250 mm diameter. Approved Makes : Flamco/IMI/Spirotech/Caleffi
-
-
-
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.
-
-
-
FRP INDUCED DRAFT COOLING TOWER (500 TR)
-
-
-
Supply, installation, testing and commissioning of FRP Induced draft, cross/counter flow, twin/four cell, direct/ gear driven, site erected cooling tower of capacity 500 TR (18,91,000 Kcal/Hr.) based on the parameters given below and complete with PVC Fill, Louvers, Drift Eliminator, TEFC Motor, Propeller Fan, PVC Sump & Steel Ladder etc. The cooling tower shall conform to technical specifications given in the tender. The maximum allowable sound power at a distance of 1 M from the cooling Tower shall be less than 75 dB. The cooling Tower Model shall be to suit site condition.
-
-
-
Duty Parameters
-
-
-
Capacity -500 TR (18,91,000 Kcal/Hr)
-
-
-
Designed Wet Bulb Temperature - 28.3 °C
-
-
-
Water Inlet Temperature - 37.77 °C
-
-
-
Water Outlet Temperature - 32.22 °C
-
-
-
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, etc. as required in Indian Rupees.
-
-
-
CONDENSER WATER PUMPS
-
-
-
Supply, installation, testing and commissioning of Horizontal Split Casing condenser water centrifugal pump sets with bronze impeller for condenser water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, vibration isolators, SS Shaft, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters: (4W+1S)
-
-
-
Capacity of Each Pump LPM 4720
-
-
-
Pump Head (Mt) 33.00
-
-
-
Motor HP 60.0
-
-
-
Minimum Efficiency 80 %
-
-
-
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, etc. as required in Indian Rupees.
-
-
-
PRESSURIZED EXPASNION TANK WITH BUILT-IN VACUUM DEGASSER
-
-
-
Supply, installation, testing & commissioning of Pressurized Expansion Tank, Pressurization Unit with vacuum cylinder c/w break tank as detailed in specification. High and low pressure alarm setting shall be selectable by the user. Expansion and pressurization of the chilled water system to be provided by an integrated pump with pressurized expansion tank(s) for : Approximate system volume = 1,02,000 ltr at Max ambient temp 40 Deg C and Total Static height above the expansion tank 40 M. The whole system duly tested from factory conforming to international standards PED-97/23/EC, IEE, EMC-2004/108/EC, Machinery Directive 95/16/EC. System pressure shall be regulated within ± 0.2 bar (2.9 psi) of the set pressure. The system shall consist of following :
1) Pressurization Unit with vacuum degasser c/w Pumps,vacuum cylinder, Break tank, float valve, over flow connection, pressure sensor for system and for vacuum cylinder, solenoid valve, isolation Valve, NRV, Drain Valve, flood protection in the event of a serious leak, Pipe fittings c/w Controller & display, full unit duly tested, housed in a mild steel cabinet. 2) Pressurized Expansion Tank 1200 ltr made from top quality steel and finished with a gleaming red epoxy-powder coating c/w high quality butyl rubber removable bladder, Nitrogen filling for longer maintenance of pre pressurization. Expansion Tank shall have third party certificate (TUV / lloyds registered).Vessel 100-1000 liters :in accordance with EN13831/ 1200-8000 liters : in accordance with AD2000. 3) Controller : Controller for pressurization as well as vacuum degassing with IP 54 rating. bright LED display showing srolling messages and status of the main operating components, top up function, flood limiter/shut down function in event of serious leak. in case of any fault, controller shall display fault code and generate alarm Approved Makes : Flamco/IMI/Spirotech/Caleffi
-
-
-
Capacity of the pressurised tank - 1200 Liters
-
-
-
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.
-
-
-
SIDE STREAM FILTRATION SYSTEM
-
-
-
Supply, Installation, testing and commissioning of SIDE STREAM FILTRATION SYSTEM to remove unwanted solids from Condenser loop using Lakos centrifugal-action Lakos vortex separator. Control of solids in the recirculated cooling water system shall be accomplished via a side-stream flow of 10-25% of the full-stream system flow through a completely assembled separation / filtration package. The package's pump shall provide sufficient pressure for the re-introduction of side-stream fluid back into system flow.The side stream filteration unit shall be of suitable for 380 USGPM flow rate and pressure drop of 0.2 - 0.8 Bar, Maximum working pressure of 10.3 Bar and Maximum operating temperature of 60 deg.C. The complete packaged unit shall consist of the following
-
-
-
Pump
-
-
-
End-suction, single stage; TEFC motor; iron / Bronze impeller; flooded suction required.
-
-
-
Seperator
-
-
-
Centrifugal-action accessible design, incorporating a true tangential inlet and mutually tangential Swirlex internal accelerating slots, employed to promote the proper velocity necessary for the removal of the separable solids. The internal accelerating slots shall be spiral-cut for optimum flow transfer, laminar action and particle influence into the separation barrel. Avoid Dome type or Dumbbell type of Separator construction to prevent the lack of internal method of acceleration & efficiency. The separator's internal vortex shall allow this process to occur without wear to the accelerating slots. Separated particle matter shall spiral downward along the perimeter of the inner separation barrel, in a manner which does not promote wear of the separation barrel, and into the solids collection chamber, located below the vortex deflector plate. The separator shall be of unishell construction with SA-36, SA-53B or equivalent quality carbon steel, minimum thickness of .25 inches (6.35 mm). Level of filtration & effectiveness must be as per given specification, Performance Testing must be done by an independent and identified testing laboratory for any of the separator.
-
-
-
Automatic Purge Valve
-
-
-
An electrically-actuated valve programmed at appropriate intervals and duration in order to efficiently and regularly purge solids from the separator's collection chamber.
-
-
-
Electrical control
-
-
-
Star Delta starter with overload module; HOA selector switch; re-set/disconnect/trip switch. Power requirement: 380/415 volt, 3 phase, 50 Hz.
-
-
-
Skid Plate
-
-
-
Steel, 3/16-inch (5 mm) minimum thickness or Steel Structural base Approved Make : Lakos/Towerflo/Towerscour
-
-
-
HOT WATER GENERATOR
-
-
-
Supply, installation, testing and commissioning of Hot Water Generator With VFD for Monsoon Reheat of capacity 150 KW in three banks complete with controls, electrical panels etc. confirming to technical specifications Section.
-
-
-
Inlet Water Temperature 44.44 °C (112°F)
-
-
-
Outlet Water Temperature 54.44 °C (130°F)
-
-
-
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees. (2W+1S)
-
-
-
HOT WATER PUMPS
-
-
-
Supply, installation, testing and commissioning of Monoblock hot water centrifugal pump sets with VFD.Pump Sets having bronze impeller for hot water recirculation complete with TEFC Sq. Cage induction motor with class "B" insulation, base plate, vibration isolators etc. conforming to techinical specification and as per following parameters. The hot water pumps shall include thermal insulation & cladding.
-
-
-
Capacity of Each Pump LPM -310
-
-
-
Pump Head (Mt) -25.0
-
-
-
Motor HP -10 HP
-
-
-
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, etc. as required in Indian Rupees. (2W+1S)
-
-
-
VARIABLE SPEED HYDROPNEUMATIC SYSTEM
-
-
-
Supply, installation, testing and commissioning of variable speed (VSPS) hydropneumatics system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running controller, dry running Protection, motor control center, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 90 liter capacity M.S diaphragm tank with interchangeable butyl rubber membrane, complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc. as required) , power box, equipped with fuses/ isolators/circuit breakers as required.
-
-
-
Hyd. System for Soft Water Supply Pump (OPD BLOCK)
-
-
-
Flow rate : 180.0 LPM each (4hr Working)
-
-
-
Pumping Head - 60/65 m
-
-
-
Approx. H.P. - 5 HP or as per manufacturer recommendation.
-
-
-
1 Set = 3 Nos. pump (2 working+1 standby)
-
-
-
AIR CONDITIONING EQUIPMENTS LOW SIDE
-
-
-
DOUBLE SKIN FLOOR MOUNTED AIR HANDLING UNIT WITH PRE-FILTER
-
-
-
Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/ PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 4/6 row deep with 1.2mm thick Copper Header, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for variable frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities
-
-
-
The cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, complete with motor, belt drive etc. without face and bypass dampers. The AHU panels shall be insulated with 25mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section with starter panel. The complete AHU shall conform to standard specification. The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
-
-
-
Chemical, Biological and Radiological (CBR) filtration with dia-electric media with efficency not less than 90 % of PM .1 micron alongwith 95 % of gases contamination removal with 350 mm depth (CBR- Certification IACS for filteration efficiency, Green Pro, ISO, FDA & RoHS - refer details specifcation for CBR Filter for compliance) in the AHU along with necessary frames, Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers having required wattage for different CFM's. The Equipment shall a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from ICMR approved lab with an minimum efficiency of 99 percent against SARS COV2 within 45 minutes
-
-
-
15,000 CFM, 55 mm St. Pr., 4 Row CC
-
-
-
15,000 CFM, 55 mm St. Pr., 6 Row CC
-
-
-
16,000 CFM, 55 mm St. Pr., 4 Row CC
-
-
-
16,000 CFM, 55 mm St. Pr., 6 Row CC
-
-
-
18,000 CFM, 55 mm St. Pr., 6 Row CC
-
-
-
21,000 CFM, 55 mm St. Pr., 6 Row CC
-
-
-
22,000 CFM, 55 mm St. Pr., 6 Row CC
-
-
-
24,000 CFM, 55 mm St. Pr., 6 Row CC
-
-
-
DOUBLE SKIN FLOOR MOUNTED AIR HANDLING UNIT WITH FINE FILTER
-
-
-
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm Galvanised steel sheet inside with fan & fan section, fan motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4/6 row cooling & 2 row heating coil made of Aluminium finned Copper tube, 1.2mm thick Copper header with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, fine filter section with filters of non woven synthetic media of 5 micron particle size, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, belt drive package, guard etc. without face and bypass dampers. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only with starter panel. The complete AHU shall conform to standard specification. The face velocity across cooling / heating coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
-
-
-
Chemical, Biological and Radiological (CBR) filtration with dia-electric media with efficency not less than 90 % of PM .1 micron alongwith 95 % of gases contamination removal with 350 mm depth (CBR- Certification IACS for filteration efficiency, Green Pro, ISO, FDA & RoHS - refer details specifcation for CBR Filter for compliance) in the AHU along with necessary frames, Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers having required wattage for different CFM's. The Equipment shall a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from ICMR approved lab with an minimum efficiency of 99 percent against SARS COV2 within 45 minutes
-
-
-
2,500 CFM, 50 mm St. Pr., 6 Row CC, 2 Row HC
-
-
-
6,000 CFM, 50 mm St. Pr., 6 Row CC, 2 Row HC
-
-
-
7,000 CFM, 50 mm St. Pr., 6 Row CC, 2 Row HC
-
-
-
9,000 CFM, 65 mm St. Pr., 6 Row CC, 2Row HC
-
-
-
14,000 CFM, 65 mm St. Pr., 6 Row CC, 2 Row HC
-
-
-
15,000 CFM, 65 mm St. Pr., 6 Row CC, 2 Row HC
-
-
-
DOUBLE SKIN FLOOR MOUNTED AIR HANDLING UNIT WITH HEPA FILTER
-
-
-
(For OT With 10 ACPH/Hr)
-
-
-
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm polished SS sheet inside with backward curved fan in supply and forward curved in exhaust with fan section and fan motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling & 2 row heating coil made of Aluminium finned Copper tube, 1.2mm thick Copper header with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90% in both the supply & exhaust side of AHU, fine filter section with filters of non woven synthetic media of 5 micron particle size in supply after fan, (Hepa filters shall be at terminals along with laminar flow plenum & not to be included in the cost), mixing chamber, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, belt drive package, guard etc. without face and bypass dampers. The AHU panels shall be insulated with 48mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only with starter panel. These AHUs shall have air inlet / outlet connection made of aluminium 20 G & all fixing arrangement / blank off shall be of SS The complete AHU shall conform to standard specification. The face velocity across cooling / heating coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
-
-
-
3000 CFM Supply Air, 8 Row CC, 2 Row HC, 125 mm St. Pr., For Supply Fan, Supply Fan, 1000 CFM Ex. Air Blower, 40 mm St. Pr. for Exhaust fan with other accessories as specified)
-
-
-
DOUBLE SKIN CEILING SUSPENDED AHU
-
-
-
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit ceiling suspended type fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section and 1.2mm thick copper Header, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, direct / belt drive as mentioned below etc. without face and bypass dampers. All direct driven fan motor shall be sourced from fan manufacturer & factory fitted only. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only with starter panel. The complete AHU shall conform to standard specification. The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
-
-
-
Chemical, Biological and Radiological (CBR) filtration with dia-electric media with efficency not less than 90 % of PM .1 micron alongwith 95 % of gases contamination removal with 350 mm depth (CBR- Certification IACS for filteration efficiency, Green Pro, ISO, FDA & RoHS - refer details specifcation for CBR Filter for compliance) in the AHU along with necessary frames, Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers having required wattage for different CFM's. The Equipment shall a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from ICMR approved lab with an minimum efficiency of 99 percent against SARS COV2 within 45 minutes
-
-
-
1,500 CFM, 32 mm St. Pr., 4 Row CC
-
-
-
1,500 CFM, 35 mm St. Pr., 6 Row CC
-
-
-
2,000 CFM, 32 mm St. Pr., 4 Row CC
-
-
-
2,000 CFM, 35 mm St. Pr., 6 Row CC
-
-
-
2,500 CFM, 32 mm St. Pr., 4 Row CC
-
-
-
3,000 CFM, 35 mm St. Pr., 4 Row CC
-
-
-
3,500 CFM, 35 mm St. Pr., 4 Row CC
-
-
-
4,000 CFM, 35 mm St. Pr., 4 Row CC
-
-
-
4,500 CFM, 35 mm St. Pr., 4 Row CC
-
-
-
5,000 CFM, 35 mm St. Pr., 6 Row CC
-
-
-
6,000 CFM, 35 mm St. Pr., 6 Row CC
-
-
-
FAN COIL UNIT (FCU)
-
-
-
Supply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters with filter box, double sandwiched insulated tray, ball valve with strainer, copper connection, rotary switch, supporting arrangement, electrical wiring etc. The fan shall be selected for 16 mm static pressure. The complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows:
-
-
-
1.0 TR (400 CFM)
-
-
-
1.5 TR (600 CFM)
-
-
-
2.0 TR (800 CFM)
-
-
-
3.0 TR (1200 CFM)
-
-
-
THERMOSTAT FOR AHU & FCU
-
-
-
Supply, installation, testing and commissioning of digital display type thermostat for air handling unit for cool / heat application suitable for four pipe system & humidistat suitable for working with humidifier and hot water coil control valves for various air handling Units.Controller have provision to display differential pressure accress OT if required. The thermostat shall have provision of setting of space temperature and display of the same.
-
-
-
The humidistat shall have provision of setting space RH and display of the same. The quoted price of thermostat / humidistat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. The cost quoted shall be excluding the control valves and humidifier
-
-
-
Cooling / heating Digital display type common thermostat & humidistat to be installed in OT & shall have temperature & RH setting control from OT as & when required.
-
-
-
Cooling / heating thermostat for balance AHU
-
-
-
Snap Acting Humidistat at air-handler.
-
-
-
THERMOSTAT FOR FCU
-
-
-
Supply, installation, testing and commissioning of automatic control for Fan Coil Units consisting of pressure independent balancing cum two way control valve (already quantified above) & digital thermostat, which will have provision of setting of room temperature, setting of fan speed (High, Medium, Low) and shall display the inside RH.
-
-
-
HUMIDIFICATION PACKAGE
-
-
-
Supply, installation, testing and commissioning of Humidification package with all necessary controls as required as per standard specification & of following capacities: 3.0 KW
-
-
-
LAMINAR AIR FLOW
-
-
-
Supply, installation & testing of factory fabricated Laminar air flow pattern perforated plenum made of 16 G aluminium sheet with hepa filters & suitable for operation theatre with all accessories as required to suit, site condition as per specifications. SIZE-2.4mx2.4m
-
-
-
AIR OZONE SYSTEMS
-
-
-
Supply, installation, testing, commissioning and handing over the air ozone systems for maintaining indoor air quality. The components of the system must be in strict conformity with the technical specifications. The price to include all connected wiring between the duct mounted ozone generator, VOC sensor / controller. The single phase power supply to the ozone generator / monitor shall be provided near the controllers. Common area ceiling hung AHU shall not have this facility.
-
-
-
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.
-
-
-
Ozone Generator With Sensor & VOC Controller
-
-
-
ULTRA VOILET GERMICIDAL IRRADIATION SYSTEM (UVGI )
-
-
-
Supply, Installation , testing , commissioning and handing over of the Ultra Violet Germicidal Irradiations (UVGI) System for maintaining indoor Air Quality. The components of the system must be in strict conformity with the specifications. And shall be including freight from works to site ,Insurance,Lifting,Shifting etc.as required . Single phase power supply for the UVGI will be provided by others. The prices to include all inter connected wiring between the UVGI Lamps. For Detail please refer the Basis of Design For Selection.
-
-
-
DBD Bi Polar Ionization
-
-
-
Supply, installation, testing & commissioning of Dielectric Barrier Discharge (DBD) Bi-Polar Ionization System to remove the odour, VOCs, Molds, Viruses, Bacteria's, Pathogens, PMs .
Bipolar ionization system must have compliances to below reference codes and standards :
1.UL 2998 Ozone Free Compliance 2. UL 867-2013 Ozone Standard for Electrostatic Air Cleaners including ozone chamber test 3. IP66 Enclosures
4. UL 1995 Heating and Cooling Equipment.
5. UL 2043 Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces.
6. OPA 2807-10, OPA 2808-10
7. ASHRAE 62.1
-
-
-
The bipolar ionization air purifiers shall have been independently tested by a third-party to ANSI/AHAM AC-1-2002 and provide a minimum Clean Air Delivery Rate (CADR) performance of 125 Dust CADR and 190 Mold CADR. Any bipolar ionization system not tested or rated above a 100 CADR is not allowed. Bipolar ionization manufacturer must have third party laboratory testing results proving contaminant and pathogens reductions against COVID thru ASTM Test Method( 99.9% efficiency), VOCs and TVOC (90% efficiency), MS2 (95% efficiency), Staph (95% efficiency), E. Coli (95% efficiency), Dust-Particulate Matter 0.3 (86% efficiency), Mold (90% efficiency), and C. Dificile (95% efficiency). Manufacturer shall furnish these reports on request. Ionization tubes must be constructed from durable, shatterproof composite material, not glass. Composite tubes must be able to last for 17,600 hours or more. Glass tubes are not be permitted due to potential of shatter caused by vibration. Tube must retain 90% of ion output efficiency at 17,600 hour mark.
The units to be as per as per Specification for all re-circulating systems of following capacity of units as mentioned below.
-
-
-
VARIABLE AIR VOLUME (VAV) BOX
-
-
-
Supply, installation, testing, and commissioning of pressure independent VAV boxes for cooling / heating application including 220 / 24 V transformers, wiring between transformers, temperature sensors for VAV box suitable for following air Quantity (CFM)
-
-
-
1000 to 1200 CFM
-
-
-
1201 to 1500 CFM
-
-
-
1501 to 1800 CFM
-
-
-
1801 to 2200 CFM
-
-
-
2201 to 2700 CFM
-
-
-
2701 to 3200 CFM
-
-
-
3201 to 3600 CFM
-
-
-
3601 to 4000 CFM
-
-
-
VARIABLE AIR VOLUME (VAV) Diffusers
-
-
-
Supply, Installation, Testing & Commission of 4-way Analog Type variable geometry VAV Diffuser (electronically Controlled) complete with Vary-Drive actuator, housing & appearance panel as per specifications.
-
-
-
Wall mounted Thermostat Unit
-
-
-
USB – Commissioning Module with cable
-
-
-
Power Module Unit
-
-
-
Supply, installation, testing and commissioning of Scheduled Timer for wall mounted split type Air conditioning units.
-
-
-
Air Cooled Ductable Unit
-
-
-
Supplying, installing, testing and commissioning of Air Cooled Ducted Air conditioners suitable for R410A or eco-friendly refrigerant with evaporating unit comprising of cooling coil, blower with motor in Metallic (Steel) casing and condensing unit comprising hermetically sealed scroll compressor, condenser coil, and propeller fan. Unit shall be complete with controls, interconnecting copper refrigerant piping with insulation, Expansion kit to connect with DX AHU, and electrical cabling etc. between evaporative and condensing unit, refrigerant gas and oil and complete as per specifications. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. The refrigerant piping & cabling shall run in PVC sleeve Steel supporting structure for outdoor units suitable for wall mounting / floor mounting.
-
-
-
Providing, fixing and testing of copper refrigerant piping of appropriate sizes duly insulated with nitrile rubber insulation of 19 mm thickness. The pipes plus nitrile rubber insulation and cable are to be covered with PVC flexible conduits for protection.
-
-
-
Note: Providing and fixing of Powder coated M.S. angle iron frame work/Masonry Pedestal with required anti-vibration mounting for outdoor unit is also included in the above scope. Contractor to submit design/Scheme for Iron frame and obtain approval of engineer/employer before proceeding purchase & installation.
-
-
-
Nitrogen pressure testing for refrigerant pipe leakages & flushing during installation & after commissioning between IDU & ODU with flare nuts. Refrigerant gas & oil charging as per OEM standard.
-
-
-
Necessary corrosive treatment of copper coil of the ODU with Aluminium hydroxide, 25 microns thickness or equivalent coating as per manufacturer standard to protect from corrosion, sulphur and other chemical contaminants present in the air. The coating should be done in the presence of OEM representative. The coating shall be carried-out by the authorized applicator of coating manufacturer.
-
-
-
4.0 TR (1600 CFM) Ductable Split Unit
-
-
-
5.5 TR (2200 CFM) Ductable Split Unit
-
-
-
8.5 TR (3400 CFM) Ductable Split Unit
-
-
-
11.0 TR (4400 CFM) Ductable Split Unit
-
-
-
AIR COOLED PRECISION AIR-CONDITIONER
-
-
-
Supplying, installing, testing and commissioning of micro-processor controlled Air Cooled Precision Air conditioners suitable for R410A or eco-friendly refrigerant with evaporating unit comprising of cooling coil, blower with motor in Metallic (Steel) casing and condensing unit comprising hermetically sealed scroll compressor, condenser coil, and propeller fan. Unit shall be complete with steam humidifier, necessary measuring controls, interconnecting copper refrigerant piping with insulation, drain pipes and electrical cabling etc. between evaporative and condensing unit, refrigerant gas and oil and complete as per specifications. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. Nothing extra shall be paid on any account i.e. refrigerant pipes, drain pipes etc.
-
-
-
Providing, fixing and testing of copper refrigerant piping of appropriate sizes duly insulated with nitrile rubber insulation of 19 mm thickness and cabling for all types of Air Cooled Precision Air conditioners. The pipes plus nitrile rubber insulation and cable are to be covered with PVC flexible conduits for protection.
-
-
-
Note: Providing and fixing of Powder coated M.S. angle iron frame work for outdoor unit is also included in the above scope. Contractor to submit design/Scheme for Iron frame and obtain approval of engineer/employer before proceeding purchase & installation.
-
-
-
Capacity : 2.0 TR (1000 CFM)
-
-
-
Capacity : 3.0 TR (1500 CFM)
-
-
-
Capacity : 4.0 TR (2000 CFM)
-
-
-
VENTILATIONS EQUIPMENTS
-
-
-
AXIAL FLOW FANS (SMOKE EXTRACTION/EXHAUST FAN)
-
-
-
Supply, installation testing & commissioning of Fire Rated direct driven Axial flow fan. Each fan shall be complete with casing made from mild steel duly enamel painted, adjustable pitch die cast aluminum impeller (HUB & BLADES), mounting clits, structural frame with blank-off sheet, anchor fastener with vibration isolation Springs, back draft damper(wherever required), bird screen at one sides (entry for supply air and exit for exhaust air) and rated Motor with class-H insulation. Motor shall be suitable for 415+10% volts, 50 cycles , 3 phase AC supply. with starter panel.
-
-
-
Fan and motor shall be fire rated to 250 Deg C for 2 hours or as indicated in the specifications
-
-
-
Back draft Damper : Where required for system design roof-mounted fan shall be equipped with a rattle-free back draft damper to prevent air from re entering the fan when fan is not in operation, thus sealing completely in closed position. Damper shall be chatter proof under all conditions.
-
-
-
Note: Contractor Has to take approval on computer generated selection charts and fan curves showing power input and fan motor etc. prior to order the fans,(a) Noise level @ 3m from Fan shall be less than 78 dBA. with starter panel
-
-
-
Note:-These fans would be connected to the fire alarm system & BMS system of the building and would start automatically in case of Fire
-
-
-
Note
-
-
-
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)
-
-
-
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)
-
-
-
3. Fan motor shall meet IE3 or above standard as per IS-12615
-
-
-
4. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:
-
-
-
5. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm.
-
-
-
6. In case of attenuator , calculation of reduction of sound level with insertion loss of attenuator is to be submitted.
-
-
-
Capacity 2000 CFM, SP 15 mm wg
-
-
-
Capacity 3000 CFM, SP 15 mm wg
-
-
-
Capacity 5000 CFM, SP 20 mm wg
-
-
-
Capacity 6000 CFM, SP 20 mm wg
-
-
-
Capacity 8000 CFM, SP 20 mm wg
-
-
-
Capacity 9000 CFM, SP 20 mm wg
-
-
-
Capacity 10,000 CFM, SP 25 mm wg
-
-
-
Capacity 15,000 CFM, SP 30 mm wg
-
-
-
Capacity 16,000 CFM, SP 30 mm wg
-
-
-
Capacity 18,000 CFM, SP 30 mm wg
-
-
-
Capacity 20,000 CFM, SP 30 mm wg
-
-
-
Capacity 25,000 CFM, SP 40 mm wg
-
-
-
Capacity 30,000 CFM, SP 40 mm wg
-
-
-
Capacity 32,000 CFM, SP 40 mm wg
-
-
-
Capacity 34,000 CFM, SP 40 mm wg
-
-
-
AXIAL FLOW FANS (SUPPLY/PRESSURISATION FAN)
-
-
-
Supply, installation testing & commissioning of direct driven Axial flow fan. Each fan shall be complete with casing made from mild steel duly enamel painted, adjustable pitch die cast aluminum impeller (HUB & BLADES), mounting clits, structural frame with blank-off sheet, anchor fastener with vibration isolation Springs, back draft damper (wherever required) bird screen at both sides and rated Motor with class-F insulation. Motor shall be suitable for 415+10% volts, 50 cycles , 3 phase AC supply with starter panel.
-
-
-
Back draft Damper : Where required for system design roof-mounted fan shall be equipped with a rattle-free back draft damper to prevent air from re entering the fan when fan is not in operation, thus sealing completely in closed position. Damper shall be chatter proof under all conditions.
-
-
-
Note: Contractor Has to take approval on computer generated selection charts and fan curves showing power input and fan motor etc. prior to order the fans,(a) Noise level @ 3m from Fan shall be less than 78 dBA. with starter panel
-
-
-
Note:-These fans would be connected to the fire alarm system & BMS System of the building and would start automatically in case of Fire
-
-
-
Note
-
-
-
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)
-
-
-
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)
-
-
-
3. Fan motor shall meet IE3 or above standard as per IS-12615
-
-
-
4. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:
-
-
-
5. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm.
-
-
-
6. In case of attenuator , calculation of reduction of sound level with insertion loss of attenuator is to be submitted.
-
-
-
Supply Fan
-
-
-
Capacity 2000 CFM, SP 15 mm wg
-
-
-
Capacity 3000 CFM, SP 15 mm wg
-
-
-
Capacity 5000 CFM, SP 20 mm wg
-
-
-
Capacity 6000 CFM, SP 20 mm wg
-
-
-
Capacity 8000 CFM, SP 20 mm wg
-
-
-
Capacity 9000 CFM, SP 20 mm wg
-
-
-
Capacity 10,000 CFM, SP 25 mm wg
-
-
-
Capacity 11,000 CFM, SP 25 mm wg
-
-
-
Capacity 12,000 CFM, SP 25 mm wg
-
-
-
Capacity 14,000 CFM, SP 25 mm wg
-
-
-
Capacity 15,000 CFM, SP 30 mm wg
-
-
-
Capacity 16,000 CFM, SP 30 mm wg
-
-
-
Capacity 18,000 CFM, SP 30 mm wg
-
-
-
Capacity 20,000 CFM, SP 30 mm wg
-
-
-
Capacity 25,000 CFM, SP 30 mm wg
-
-
-
Capacity 30,000 CFM, SP 40 mm wg
-
-
-
Capacity 32,000 CFM, SP 40 mm wg
-
-
-
Capacity 34,000 CFM, SP 40 mm wg
-
-
-
Capacity 37,000 CFM, SP 40 mm wg
-
-
-
ROOF MOUNTED FAN (SMOKE EXTRACT/FRESH AIR )
-
-
-
Supply, installation testing & commissioning of Roof mounted smoke extract /Fresh Air fan shall be vertical discharge type, direct driven as shown on drawing and required to meet system design requirement., complete with impeller , motor and weather proof aluminum housing Roof mounted smoke fans should be able to withstand the temperature of 250deg C/2hr with starter panel. The certifications should be in accordance with UL standards and as per specifications. Structural frame with blank-off sheet, anchor fastener with vibration isolation Springs.
-
-
-
a. Housing: shall be constructed of 16 gauge steel sheet. The housing shall have an adjustable flange to facilitate installation and shall be especially adapted to receive fan, motor, and drive. The, motor shall be installed in ventilated water proof housing outside the air stream. The discharge cowl shall be hinged along one edge for easy access to motor and drive, for inspection and maintenance. The entire assembly shall be weatherproof and raised from the roof terrace sufficiently to prevent down flow of rain water accumulated on the terrace. 18 gauge galvanized steel mesh bird screen shall be provided on all discharge cowls around the outlet area.
-
-
-
b. Fans : shall be propeller type as required, designed for maximum efficiency, minimum turbulence and quiet operation. Fan shall be statically and dynamically balanced.
-
-
-
c. Motor : shall be energy efficient IE 3 ( as per IS 12615) squirrel-cage, totally- enclosed, fan cooled, standard frame, constant speed, continuous duty, single winding, suitable for 415±10% volts, 50 cycles, 3 phase AC power supply, provided with class `F’ insulation. designed for quiet operation and IE3 efficient. Bearings shall be designed for vertical mounting. Motor name-plate horse-power shall be such that the motor shall not be overloaded in the entire range of rated speed. Motor and fan assembly shall be easily removable. Motor power supply characteristic and maximum speed shall be as specified for propeller fans with starter panel.
-
-
-
d. Fan Bearings : shall be heavy duty, self-aligning sleeve/ball bearings designed for thrust load and sealed for grease retention.
-
-
-
e. Back draft Damper : Where required for system design roof-mounted fan shall be equipped with a rattle-free back draft damper to prevent air from re entering the fan when fan is not in operation, thus sealing completely in closed position. Damper shall be chatter proof under all conditions.
-
-
-
f. Vibration Isolation :The motor and fan assembly shall be isolated from the base with vibration isolators.
-
-
-
Noise level shall be 80 dBA @ 1m Distance.
-
-
-
Note:-These fans would be connected to the fire alarm system & BMS System of the building and would start automatically in case of Fire
-
-
-
Capacity 5000 CFM, SP 25 mm wg
-
-
-
Capacity 6000 CFM, SP 25 mm wg
-
-
-
CABINET TYPE CENTRIFUGAL FAN :
-
-
-
Supply, installation, testing, commissioning of direct driven double skin Cabinet type centrifugal fan with 25mm thick PUF insulation fan section consist of Centrifugal Fan, forward curve, with radial tip double wheel, double inlet, consisting of motor, drive arrangement, aluminum common frame for fan and motor, cushy foot mounting, aluminum base frame for the unit, VCD on the outlet of fan, filter and accessories as per specification and drawing complete with 25mm thick five layer GI wire mesh filter, Structural frame with blank-off sheet, anchor fastener with vibration isolation Springs and starter panel.
-
-
-
Motor: Fan motor shall be energy efficient and suitable for 415±10% volts, 50 cycles, 3 phase AC power supply, squirrel-cage, totally enclosed, fan-cooled motor, provided with class F insulation, and of approved make. Motor name plate horsepower shall exceed brake horsepower by a minimum of 10%. Motor shall be designed especially for quiet operation and motor speed shall not exceed 1440 rpm. The fan and motor combination selected for the required performance shall be of the most efficient (smallest horsepower), so that sound level is lowest. Motor shall have a minimum efficiency of IE3 or as per relevant BIS/NEMA codes.
-
-
-
The motor shall be spark-proof. The starter panel shall be provided with in-built timer to switch OFF the fan after a preset time (say 300 seconds) once triggered
-
-
-
The cost include with approximate 10 RM suitable cabling between starter & unit.
-
-
-
Note:-These fans would be connected to the fire alarm system/BMS System of the building and would start automatically in case of Fire
-
-
-
Note
-
-
-
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)
-
-
-
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)
-
-
-
3. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:
-
-
-
600 CFM with 10 mm static Pressure (Flame Proof)
-
-
-
6000 CFM with 35 mm static Pressure
-
-
-
8000 CFM with 35 mm static Pressure
-
-
-
9000 CFM with 35 mm static Pressure
-
-
-
10000 CFM with 35 mm static Pressure
-
-
-
12000 CFM with 35 mm static Pressure
-
-
-
18000 CFM with 35 mm static Pressure
-
-
-
20000 CFM with 35 mm static Pressure
-
-
-
CABINET TYPE (Fire Rated) :
-
-
-
Supply, installation, testing, commissioning of direct driven double skin Cabinet type centrifugal fan with 25mm thick PUF insulation fan section consist of Centrifugal Fan, forward curve, with radial tip double wheel, double inlet, consisting of motor, drive arrangement, aluminum common frame for fan and motor, cushy foot mounting, aluminum base frame for the unit, VCD on the outlet of fan, filter and accessories as per specification and drawing complete with 25mm thick five layer GI wire mesh filter, Structural frame with blank-off sheet, anchor fastener with vibration isolation Springs and starter panel.
-
-
-
Motor: Fan motor shall be energy efficient and suitable for 415±10% volts, 50 cycles, 3 phase AC power supply, squirrel-cage, totally enclosed, fan-cooled motor, provided with class H insulation, and of approved make. Motor name plate horsepower shall exceed brake horsepower by a minimum of 10%. Motor shall be designed especially for quiet operation and motor speed shall not exceed 1440 rpm. The fan and motor combination selected for the required performance shall be of the most efficient (smallest horsepower), so that sound level is lowest. Motor shall have a minimum efficiency of IE3 or as per relevant BIS/NEMA codes.
-
-
-
The motor shall be spark-proof. The starter panel shall be provided with in-built timer to switch OFF the fan after a preset time (say 300 seconds) once triggered
-
-
-
Fan and motor shall be fire rated to 250 Deg C for 2 hours or as indicated in the specifications
-
-
-
Note:-These fans would be connected to the fire alarm system/BMS System of the building and would start automatically in case of Fire
-
-
-
Note
-
-
-
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)
-
-
-
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)
-
-
-
3. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:
-
-
-
600 CFM with 10 mm static Pressure
-
-
-
20000 CFM with 35 mm static Pressure
-
-
-
INLINE FAN (Ceiling suspended)
-
-
-
Supply, installation, testing, commissioning of Inline fan with vibration isolators & speed regulator, complete as per specification and drawing. The Motor shall be suitable to run on 1 phase/50 hz/ 220 v electrical power.
-
-
-
200 CFM with 10 mm static Pressure
-
-
-
300 CFM with 10 mm static Pressure
-
-
-
400 CFM with 10 mm static Pressure
-
-
-
500 CFM with 12 mm static Pressure
-
-
-
600 CFM with 12 mm static Pressure
-
-
-
700 CFM with 12 mm static Pressure
-
-
-
800 CFM with 12 mm static Pressure
-
-
-
900 CFM with 12 mm static Pressure
-
-
-
1000 CFM with 15 mm static Pressure
-
-
-
1100 CFM with 15 mm static Pressure
-
-
-
1200 CFM with 15 mm static Pressure
-
-
-
1400 CFM with 15 mm static Pressure
-
-
-
1500 CFM with 15 mm static Pressure
-
-
-
PROPELLER FAN:
-
-
-
Supply, installation, testing, commissioning of Wall mounted fan with gravity louvers, vibration isolators & speed regulator, complete as per specification and drawing.
-
-
-
100 CFM
-
-
-
200 CFM
-
-
-
300 CFM
-
-
-
SENSOR
-
-
-
CO Sensors along with PLC controller and suitable cable as per specifications with IP-65 protection. CO sensors having range 0 to 300 ppm with analog output 4 to 20mA or 0 to 10 V DC output signal. These CO sensors and controller are interface with fire alarm panel/BMS (as available). All CO Sensors specification meets with NBC-16 requirements & Specification.
-
-
-
H2 Sensor for Battery room with IP-65 protection, long life, fast response with high accuracy and integrated with BMS Panel. Hydrogen level in Battery room as per Fire Code and CE/UL approved. These H2 sensors and controller are interface with fire alarm panel/BMS (as available) & Specification.
-
-
-
Response Time10 sec
-
-
-
Output-4-20mA or 2-10V, Supply-24V DC
-
-
-
AIR SCRUBBER (DRY TYPE)
-
-
-
Supply, Installation, Testing & Commissioning of factory fabricated Single Skinned Air-Scrubber unit floor mounted type with blower, blower section and blower motor . Air Scrubber having minimum 90% efficiency with centrifugal fan, mentalistic vibration isolation, Direct drive arrangement, VCD, distribution headers, access door, complete as per specifications & drawings. The unit shall be fire retardant, water proof double flexible connection at fan outlet and starter panel. The Industrial Electronic Air Cleaning System shall be supplied as a one-piece factory joined assembly of individual section(s) selected to treat oil mist, smoke, fume, grease & dust / powder problems.
-
-
-
The unit shall provide efficiency of 90% or better for single pass base on ASHRAE test method at flow rates of 800 – 1500 CFM per module (supported by sample test report by a US laboratory).
-
-
-
Housing shall be constructed with minimum 1.4 mm thick galvanized steel sheet (16 gauge) with reinforced structure and powder coated to protect against rust and corrosion. It shall have a hinged door for cell access, located one side to the unit. The door shall be gasketed to prevent air leakage. There shall be a safety interlock switch to cut off primary supply when the access door is opened.
-
-
-
Ionizing-Collecting Cell(s) shall be of one-piece construction consisting of a series of repelling and collection plates. Both repelling and collector plates shall be aluminum alloy material, rigidly retained in place with tubular spacers and tie rods. Each plate shall be corrugated, perpendicular to airflow direction. Each cell shall weigh not more than 16 kg with at least 9 ionizing wires.
-
-
-
Ionizing electrodes / wires shall be of tungsten material, rigidly supported both vertically and laterally. Ionizing electrode to ground electrode spacing shall be 1.0” (25 mm). High voltage support insulators shall be of Teflon material for dielectric strength.
-
-
-
Each Ionizing / Collecting Cell shall be capable of handling up to 3000 cmh of air. There shall be one to four such ionizing / collecting cells per module. Each module shall handle up to 3000 CMH, 6000 CMH, 9000 CMH and 12000 CMH per module respectively. Multiple units of the same or different modules may be needed to handle higher air flow capacities.
-
-
-
Sound level at 3mt distance at 1.5mt Height from fan outlet shall not be more than 80dbA.
-
-
-
Power supplies shall be 100% solid state, operate on 240 VAC, 50 HZ, 1 Phase input and provide a dual high voltage output of 12 to 13 KVDC for the ionizer and 6.0 to 6.5 KVDC for the collector, in normal operation conditions. Current output at the high tension shall be 12mA. A maximum power output for the solid-state power supply shall be from 50 watts to up to 150 watts to maintain the specified collection efficiency.
-
-
-
The rated efficiency shall be up to 95% based on the NIOSH 5026 OIL MIST TEST. Past on situ test reports of 90% to 95% of the said test method must be submitted.
-
-
-
16,000 CFM with 60 mm static Pressure
-
-
-
AIR WASHER :
-
-
-
Supply, Installation, Testing & Commissioning of factory fabricated Double Skinned Air-washer unit floor mounted type fabricated out of extruded aluminum section with 0.8mm pre-plasticized /pre-coated Galvanized steel sheet outside & 0.8 mm plain Galvanized steel sheet inside with blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply. Air washer having minimum 90% efficiency with consisting of centrifugal fan, mounting arrangements, mentalistic vibration isolation, belt drive arrangement, VCD, distribution headers, access door, pump, stainless steel water tank, suction screen, impregnated cellulose paper fills, nylon prefilter, GI ‘B’ class piping & associated works, quick fill, makeup & drain connections with butterfly & float valves etc. complete as per specifications & drawings. The unit shall be fire retardant, water proof double flexible connection at fan outlet and with starter panel.
-
-
-
Filters section shall incorporate synthetic washable filters of at least 50 mm thickness in suitable aluminum frame. Velocity of air across the fillers shall not exceed 500 fpm (2.5m/s).
-
-
-
8000 CFM with 50 mm static Pressure
-
-
-
10000 CFM with 50 mm static Pressure
-
-
-
14000 CFM with 50 mm static Pressure
-
-
-
16000 CFM with 50 mm static Pressure
-
-
-
22000 CFM with 50 mm static Pressure
-
-
-
CHILLED /CONDENSOR/HOT WATER PIPING & VALVES
-
-
-
Motorised Butterfly Valves
-
-
-
Supply, installation, testing and commissioning of motorised on / off butterfly valves with modulating motor in return chilled & condenser water line of each chiller, condenser & cooling tower operated through BMS & of following sizes: 200 mm dia (For Chillers)
-
-
-
BUTTERFLY VALVE (MANUAL)
-
-
-
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.
-
-
-
Brass Ball Valves
-
-
-
PN 16 pressure rating for chilled water/hot eater circulation as specified
-
-
-
25 mm dia With Strainer
-
-
-
32 mm dia With Strainer
-
-
-
Automatic Balancing Valves
-
-
-
Supply, installation, testing and commissioning of automatic balancing valves in return chilled and condenser water line of each chiller, condenser and cooling tower as per tender specification & of following sizes:
-
-
-
200 mm dia (For Chillers) With Insulation
-
-
-
80 mm dia
-
-
-
Auto Air Vent Valve
-
-
-
15 mm dia
-
-
-
19 mm dia
-
-
-
25 mm dia
-
-
-
FLOW SWITCH
-
-
-
Supplying, fixing, testing and commissioning of SG Iron Body flow switch with necessary control wiring and interlocking at Condenser Water Pump
-
-
-
DRAIN VALVES
-
-
-
Supply, Installation, Testing & Commissioning for Drain Valves in dirt legs complete with nipples as per specifications.
-
-
-
50 mm Dia
-
-
-
40 mm Dia
-
-
-
25 mm Dia
-
-
-
CONDENSOR WATER PIPES
-
-
-
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS ‘C’ class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. But excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.
-
-
-
Note:-The Pipes size 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes up to 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
-
-
-
All outdoor condenser water piping shall be treated with Zinc Cromate Primer plus two coats of Epoxy Paints.
-
-
-
450 mm dia
-
-
-
400 mm dia
-
-
-
Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.
-
-
-
BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.
-
-
-
250 mm dia
-
-
-
NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.
-
-
-
250 mm dia
-
-
-
Automatic Balancing Valves
-
-
-
Supply, installation, testing and commissioning of automatic balancing valves in return chilled and condenser water line of each chiller, condenser and cooling tower as per tender specification & of following sizes: 250 mm dia
-
-
-
Pot Strainer
-
-
-
400 mm dia
-
-
-
FLOW SWITCH
-
-
-
Supplying, fixing, testing and commissioning of SG Iron Body flow switch with necessary control wiring and interlocking at Condenser Water Pump
-
-
-
DRAIN VALVES
-
-
-
Supply, Installation, Testing & Commissioning for Drain Valves in dirt legs complete with nipples as per specifications.
-
-
-
50 mm Dia
-
-
-
40 mm Dia
-
-
-
25 mm Dia
-
-
-
GI Condensate Drain Piping
-
-
-
Supply, installation, testing and commissioning of condensate drain water piping of GI 'Medium' class complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. as required conforming to tender specifications and of following sizes. Pipe Shall be duly insulated with 6 mm thick closed cell expanded polythene.
-
-
-
25 mm dia
-
-
-
32 mm dia
-
-
-
40 mm dia
-
-
-
50 mm dia
-
-
-
65 mm dia
-
-
-
UPVC Condensate Drain Piping
-
-
-
Supply,installation,testing and commissioning of UPVC drain piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell expanded polythene.
-
-
-
25 mm ID
-
-
-
32 mm ID
-
-
-
40 mm ID
-
-
-
DUCTING,INSULATION,DAMPER, GRILLE & DIFFUSER
-
-
-
ALUMINIUM (AL) Ducting For OT
-
-
-
Supply, fabrication, installation & testing of Aluminium sheet metal ducting duly polysulphide sealed complete with Splitter Damper, vanes etc. as required for OT and as per ISI specifications and as per approved shop drawings.
-
-
-
Supply. Installation, testing and commissioning of insulation on the surface of the duct with duly laminated aluminum foil of mat finish closed cell nitrile rubber (Class 'O' ) with suitable adhesive, as per specifications and drawings. The Joints shall be sealed with 50mm wide and 3 mm thick self adhesive nitrile rubber tape Insulation. The rates shall include all materials of the insulation and labour works with adhesive, complete as required and specifications.
-
-
-
The joint between the ducts shall be done by means of polymer “flange / slide-in channel” system to prevent air leakages. Turning vanes, elbows and reducers to be considered as part of supply of ducts. Ducts shall be supported by cable supports / GI slotted channels with threaded rods. Internal Stiffeners shall be used to prevent bulging of ducts for the sizes above 800 mm.
-
-
-
0.80 MM (22 Gauge ) With 32mm Insulation
-
-
-
1.00 MM (20 Gauge ) With 32mm Insulation
-
-
-
1.25 MM (18 Gauge) With 32mm Insulation
-
-
-
FACTORY FABRICATED GALVANIZED STEE(GSS) SHEET METAL DUCTS
-
-
-
FIRE RATED FACTORY FABRICATED GALVANIZED STEE(GSS) SHEET METAL DUCTS
-
-
-
Supply. Installation, testing and commissioning of Fire rated sheet metal ducts shall be fabricated from Lock Forming Quality grade prime galvanized steel sheet with flanges complete with supports, vanes, dampers, links, levers and quadrants etc. as per specifications and drawings. Supporting distance shall not exceed 1.2 Mtr with 6mm thick fire retardant gasket suitable for 250 deg C 2 hr shall be used in duct joints along with fire sealants. Suitable access doors shall be provided at every 3m. The rates shall include all materials of the duct and labor for suspension and supporting arrangement for plenums, ducts, complete with fire retardant flexible connection as required and as per specifications.
-
-
-
All fire rated duct, smoke exhaust ducts shall be quoted with flame bar BWII or equivalent to achieve the required fire rating, also all the related accessories gaskets shall be suitable for the required fire rating.
-
-
-
Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006
-
-
-
1.25 MM (18 Gauge) Plenum & Exhaust Duct
-
-
-
Duct Acoustic Lining
-
-
-
Supply and fixing of acoustic lining of supply air duct and plenum with thick Engineered Nitrile Rubber open cell foam having a Noise Reduction Coefficient of 0.55 with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7, Air Erosion test for 10,000 fpm air velocity as per ASTM C 1071-05 and with built-in antimicrobial protection. The material should pass Fungi Resistance Test as per DIN EN ISO 846 Method A and Bacterial Resistance Test as per DIN EN ISO 846 Method C; to be applied using manufacturer's recommended Rubber based Adhesive in a blend of solvents.
-
-
-
20 mm
-
-
-
25 mm
-
-
-
BACK DRAFT DAMPERS
-
-
-
Supply, Installation, testing and commissioning of 18 Gauge G.I construction Back draft Dampers for Controlling the recirculation of air with neoprene rubber gaskets,nuts, Bolts, Centrifugals Linkages, Flanges etc. as per specification. Louvres shall be made powder coated extruded aluminum.
-
-
-
PRESSURE RELIEF DAMPERS
-
-
-
Supply,. Installation, testing and commissioning of 18 Gauge aluminum alloy extrusions with welded/cleated frames Pressure Relief Dampers for Controlling the Excess pressure up to 60pa with neoprene rubber gaskets,nuts, Bolts, Centrifugals Linkages, Flanges etc. as per specification. Louvres shall be made powder coated extruded aluminum with suitable thickness.
-
-
-
Slot Diffusers
-
-
-
Supply. Installation, testing and commissioning of slot diffusers with/without damper as specified below and as per specification.
-
-
-
3-Slot Diffuser
-
-
-
2-Slot Diffuser
-
-
-
Linear Grille
-
-
-
Supply. Installation, testing and commissioning of powder coated extruded aluminum Linear Grille.
-
-
-
100 mm
-
-
-
150 mm
-
-
-
200 mm
-
-
-
Exhaust/Fresh Air Louvers
-
-
-
Supply. Installation, testing and commissioning of exhaust air/fresh air louvers of powder coated extruded aluminum construction with bird screen, minimum 80 mm deep.
-
-
-
Under Deck Insulation of Exposed Roof
-
-
-
Providing and Fixing Underdeck Insulation with 50 mm thick with closed cell Nitrile Rubber with prelaminated Aluminum foil on one side having a low stable k value of 0.035 k.cal/hr.m at 10.C and minimum density of 40-55 ± 3 kg/cum.The R-value should be as per ECBC Code. 50mm
-
-
-
Supply, Installation, Testing & Commissioning of following Switchgears as an Isolator in IP-65 rated in power coated 16 SWG sheet steel enclosure .
-
-
-
40A 4P MCCB(25 KA)
-
-
-
63A 4P MCCB(25 KA)
-
-
-
100A 4P MCCB(25 KA)
-
-
-
CUBICAL PANEL BOARD FOR HIGH SIDE EQUIPMENTS
-
-
-
Design, Manufacture, Supplying, Transport to the site, Receiving, Unloading, Shifting to various locations, handling, assembling, installation in correct aligned position, grouting with dash fasteners, GI nuts-bolts, testing and commissioning of Totally Type Tested Panels (Form-4B construction) complying to IEC:61439 -1/2 cubical with Internal arc withstand of 50kA for 0.3 second and minimum impact resistance IK10 as per IEC:62262 with each compartment front unbreakable glazed door cover and back solid door. The degree of protection of minimum IP:42 for indoor and IP:65 for outdoor use. Panels shall be tested for an Impulse Withstand Voltage of 12kV. Suitable for 415V, 3Phase, 4 Wire 50 Hz Ac supply system bolted fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plate, bottom base channel of MS section not less than 100mmx 50mmx50mmx 5mm thick for Main L.T. Panel and capacitor panels and 40mmx25mmx25mmx 5mm thick plates for MDB/MCC and SDBs etc.
-
-
-
Including cleaning & finishing complete, SMC bus bar supports, with short circuit withstand capacity of minimum 50kA for 1 Sec., fabrication shall be done in transportable sections and all front and back doors shall be hinged type and earth with frame, Entire panel shall have a common copper continuous earth bar of size 40mm x 6mm or as specified below at the rear with 2 Nos. earth stud each side, solid inter connections from main bus bar to switch gears up to cable alley with required size. bus bars and insulated control wiring with suitable size of FRLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two half, incl. providing following switch gears :-
-
-
-
Panels will be powder coating (60-80micron as per IS:13871 for indoor and 90-100 micron for outdoor), include one size higher terminal block in cable alley and interconnecting wires between bus bars and terminals via MCB. All Bus-Bar alley and relay compartments shall be provide fully automatic control thermostat with strip heater.
-
-
-
425TR Water Cooled Centrifugal Chiller-5Nos (4 Working+1Stand by)
-
-
-
5#Primary Pumps ( 4W+1S)(25 HP EACH)
-
-
-
6# secondary pumps (4W+2S) (50 HP EACH)
-
-
-
3#150 kW Hot Water Generator(2w+1s)
-
-
-
3# Hot Water Pumps (2W+1S)(10.0 HP EACH)
-
-
-
5#CDW Pumps (4W+1S)(60 HP EACH)
-
-
-
5# 500TR Cooling Tower ( 4W+1S) ( 2 #10.0 HP each )
-
-
-
INCOMER
-
-
-
Incomers –2 Nos 1600 Amps 4P ACB 50 kA for O/C , S/C& E/F protection ,reverse power relay- trip & RS485 Port, cable connection on one side and Busbar connection on the other side.
-
-
-
INDICATING PANEL
-
-
-
Provide 1nos phase indicating lamps LED each backed up with fuse and switch.
-
-
-
Provide 1600/5a CT CI-1,15VA operated Digital Ammeter for all in-comers and outgoings including C/T's.
-
-
-
Provide 0-500 Volts range Digital Volt Meter with selector switch for all incomers
-
-
-
Two numbers indicating lamps LED on each incoming and outgoing feeder for indicating the status of feeder.
-
-
-
One number indicating lamp LED on each incoming and outgoing feeder for indicating that the feeder has tripped due to fault condition.
-
-
-
1 No. Power factor meter
-
-
-
1 No. Digital type energy meter.
-
-
-
Break Control Switch (T-N-C)
-
-
-
Control Fuse Base
-
-
-
BUS COUPLER
-
-
-
Incomers –1 Nos 1600 Amps 4P ACB 50 kA for O/C , S/C& E/F protection trip & RS485 Port, cable connection on one side and Busbar connection on the other side.
-
-
-
BUSBARS
-
-
-
Sections of 2Nos x 2000 Amps TPN bus bar chamber of suitable lengths with Aluminium bus bars. All bus bars and interconnections shall be of suitable size Al strips. Current density of Al shall not be more than 1.0 Amps/ sq.mm cross sectional area of Bus Bar
-
-
-
Incomer and 3Nos x1600 A EDO 4P ACB bus coupler shall be mechanically & electrically interlocked to avoid paralleling of the two supplies.
-
-
-
OUTGOING
-
-
-
425TR Water Cooled Centrifugal Chiller-5Nos (4 Working+1Stand by)
-
-
-
800A 4P ACB of suitable rating with overload, short circuit protection, on /off /trip indication light with control MCB. MCCB Shall be 35 KA (ICU=ICS) SET - 07 ( Extra 2 Nos Spare )
-
-
-
5#Primary Pumps ( 4W+1S)(25 HP EACH)
-
-
-
100A TPN MCCB of suitable rating with 25 HP Star delta stater , overload relay inbuilt single phase prevention, start/stop push buttons, MFM, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 07 ( Extra 2 Nos Spare )
-
-
-
6# secondary pumps (4W+2S) (50 HP EACH)
-
-
-
160 A TPN MCCB of suitable rating with Space of 50 HP VFD, overload relay inbuilt single phase prevention, start/stop push buttons, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 08 ( Extra 2 Nos Spare )
-
-
-
3#150 kW Hot Water Generator(2w+1s)
-
-
-
400A 4P MCCB of suitable rating with overload, short circuit protection, on /off /trip indication light with control MCB. MCCB Shall be 35 KA (ICU=ICS) SET - 04 ( Extra 1 Nos Spare)
-
-
-
3# Hot Water Pumps (2W+1S)(10.0 HP EACH)
-
-
-
63 A TPN MCCB of suitable rating with Space of 15 HP VFD, overload relay inbuilt single phase prevention, start/stop push buttons, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 04 ( Extra 1 Nos Spare )
-
-
-
5#CDW Pumps (4W+1S)(60 HP EACH)
-
-
-
160A TPN MCCB of suitable rating with Space for 50 HP VFD , overload relay inbuilt single phase prevention, start/stop push buttons, MFM, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 07( Extra 2 Nos Spare )
-
-
-
5# 500TR Cooling Tower ( 4W+1S) ( 2 #10.0 HP each )
-
-
-
6x 40 A TP MPCB with 2x 10.0HP Star Delta starter, overload relay inbuilt single phase prevention, start/stop push buttons, digital ammeter (0- 40A) with three CT, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MPCB Shall be 35 KA (ICU=ICS) SET - 7 (Extra 2 Nos. Spare )
-
-
-
Supply and laying ,testing and commissioning of following sizes of Copper conductor control cables with PVC conduit & fixing clamps and effecting proper connections to equipment etc. of following sizes :
-
-
-
4C x 16 Sq. mm Copper Conductor (Armoured)
-
-
-
4C x 10 Sq. mm Copper Conductor (Armoured)
-
-
-
4C x 6 Sq. mm Copper Conductor (Armoured)
-
-
-
4C x 4 Sq. mm Copper Conductor (Armoured)
-
-
-
3C x 1.5 sq. mm Copper Conductor (unarmoured)
-
-
-
3C x 2.5 sq. mm Copper Conductor (unarmoured)
-
-
-
3C x 4 sq. mm Copper Conductor (unarmoured)
-
-
-
3C x 10 sq. mm Copper Conductor (Armoured)
-
-
-
3C x 16 sq. mm Copper Conductor (Armoured)
-
-
-
MGPS WORK
-
-
-
Supply, Installation, Testing and Commissioning of Medical Gases Pipeline System
-
-
-
Oxygen System
-
-
-
6 + 6 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes as per Technical Specifications enclosed.
-
-
-
Fully Automatic Control Panel for Oxygen with inlet for Liquid Oxygen Tank, as per Technical Specifications enclosed
-
-
-
1 + 1 Cylinders Emergency Oxygen Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes as per Technical Specifications enclosed
-
-
-
Terminal Units (Gas Outlets) with probes/Adaptors ,as per NFPA Standard, Technical Specifications enclosed.
-
-
-
Oxygen Flowmeter with Humidifier Bottle as per Technical Specification enclosed
-
-
-
Oxygen H.P Antiastic rubber tube
-
-
-
Nitrous Oxide System
-
-
-
2 + 2 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes .
-
-
-
One Cylinder Emergency N2O Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes .
-
-
-
Fully Automatic Control Panel for N2O .
-
-
-
Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA
-
-
-
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
-
-
-
Compressed Air System
-
-
-
Compressed Air System including Duplex 36.66 cfm , 2 HP Motor, air cooled, oil free compressors and Air Drier, After Cooler, Moisture Saprater and 1# Air Receiver & Filteration system as per Technical Specification enclosed,
-
-
-
Terminal Units (Gas Outlets) with probes/Adaptors as per HTM/NFPA standard, Technical Specifications enclosed.
-
-
-
For C.Air ( 4 bar)
-
-
-
For C.Air ( 7 bar)
-
-
-
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded as per Technical Specification enclosed.
-
-
-
Vacuum System
-
-
-
Duplex V X 15 Vacuum Pumps of Ingersoll with Motor each with receiver vessel, with bacteria filter capacity as per Technical Specification enclosed.
-
-
-
Terminal Units (Gas Outlets) with probes/Adaptors as per HTM/NFPA Standard, Technical Specifications enclosed.
-
-
-
Ward Vacuum Unit with Regulator, Collection Jar of 1000 ml with bracket as per Technical Specification enclosed,
-
-
-
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded as per Technical Specification enclosed.
-
-
-
Combined Electrical Control Panel for Compressed Air System and Vaccum System as per Technical Specification enclosed.
-
-
-
Copper Pipes used will be solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased, manufactured as per EN 1057 part I, Table-X of 1971 and chemical composition as per BS-6017 of 1981, Table 2, Cu-DHP.
-
-
-
42mm OD X 1.2mm thk
-
-
-
28mm OD X 1 mm thk
-
-
-
22mm OD X 0.8 mm thk
-
-
-
15mm OD X 0.7 mm thk
-
-
-
12mm OD X 0.7 mm thk
-
-
-
Valves Boxes with Pressure Gauges as per Technical Specifications.
-
-
-
2 Gas Services ( O2, Air 4)
-
-
-
3 Gas Services ( O2, Vac, Air 4)
-
-
-
4 Gas Services (O2,Vac,Air4 & Air7)
-
-
-
Area Alarm as per Technical Specifications enclosed
-
-
-
2 Gas Services ( O2, Air 4)
-
-
-
3 Gas Services ( O2, Vac, Air 4)
-
-
-
4 Gas Services (O2,Vac,Air4 & Air7)
-
-
-
Isolation Valves as per Technical Specifications enclosed
-
-
-
42mm OD
-
-
-
28mm OD
-
-
-
22mm OD
-
-
-
15mm OD
-
-
-
Bed Head Panels
-
-
-
Horizontal Bed Head Panel (Al Extruded) 4 ft. Long Provision for Gas Outlet, Electrical Switch & Socket, Nurse Call, etc
-
-
-
Furniture Work
-
-
-
Providing and Fixing Model Reception and Registration Counter . It is Made of 50mm thick Metal frame and Laminate finish on both side of frame . The Reception Table Frame Height is 1050mm and is provided with a counter top at this Height. Counter Top is running along the Entire Length of Counter and has Depth of 450mm and thickness of 25mm with Corian or solid surface finish as per approval of EIC. The Working top inside the reception table is at 750mm Ht and has 600mm Depth and 25mm thickness. All Table tops and Counter tops are made in PLPB with 2mm PVC edge banding on user side and 0.8mm on other sides. A divider Frame is given every 1050 mm Length till height of 1350mm . Frame is made of 50mm Partition with Laminate Finishing Tile on both sides. Clear Glass 12 mm thick is provided above counter top from 1050mm Ht till 1500mm Height . Glass has polished edges and is fixed with D brackets with Counter Top and and also with Divider frame. Glass is provided with a Suitable cut for enabling transaction over the counter top. 1500mm Ht x 600mm D
-
-
-
Each Body Size: 915(W)x450(D)x2080(H) mm
Total 08 Nos. of Bodies in Compactor
Providing & Fixing Compactor of ht 2080mm. The side, back & top of the box is made of 0.8 thick (22 gauge) prime quality CRCA sheets. The body has independent precision punches slotted strips welded at corners to support the shelves to ensure flexibility in adjusting the height of the shelves. Shelves are made of 0.8mm thick prime quantity mild steel having 8 folds each designed to carry UDL of 60 kgs. The shelf is fixed to the compactor body by means of a support bracket, which facilitates adjustment of shelf as 25mm pitch. System is provided with centralized locking arrangement on the last unit when all the units are brought together, central lock when operated gets locked with the plate which is welded to the rail and does not allow access to the units. The compactors shall consist of single face static unit at one end and double face mobile unit in middle and single face mobile unit at other end with extension of pair of rail for movement of mobile units. The movement of mobile units shall be control with driving mechanism, operated from side with help of driving wheel.
-
-
-
Supplying and placing 6 compartment steel clothes locker, M.S Sheet conforming to commercial quality cr- 1.1980x910x480mm handle with ticket holders six lockers will have internal lock fitting and lockers shall be fitted with hasp and staple of overall sizes of lockers. Body made of 22 gauge CRCA sheet duly powder coated. Front made of 20 gauge CRCA sheet duly powder coated should be compliance with BIFMA,/ANSI/BIFMA-3, Greenguard compliance IGBC & ISO 9001:2015 and ISO 14001:2015.
-
-
-
Model: Arrow, Office Desk
Overall Size: 2400Wx2200Lx770H mm.
50mm thick table top made of MDF board with natural veneer work surface with cherry finish veneer same matching veneer edge banding made of same dark cherry P.U. polish. Modesty is designed with leather patch. Side panel made of 40mm thick.
* Provision of side unit of size is 900mm(l)x 595mm(d)x 770mm(h), construction of side unit top made of 50mm thick, 1 fixed shelve with 1 sliding shutter.
* All the MDF board are is-14587-1998 with confirm to din 68861.iso 9001- 2015 quality certification confirming to ASTM d 4499 standards for viscosity and thermal stability.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Arrow Back Storage
Size: 1600Wx400Dx770H mm.
providing & suppling placing position of modular back unit top shall be made from 25 mm thick prelaminated particle board/veneer - MDF/steam beech veneer of grade ii type iii of is 12823/latest & confirm to din 68861.iso 9001- 2015. While rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelaminated particle board/veneer - MDF/steam beech veneer P.U. polish. all edges to be provided with same matching veneer edge banding fixed with the hot melt glue
Storage unit with 4 shutters construction is 2 openable doors with 1 fixed shelve + 2 openable doors with 1 fixed shelve, in provided with 2 universal cam lock for security and handles are provided for easy of opening. over all height of product is @ 770 mm.
Each shutter should be fixed with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall have 100 mm size ss fancy handles (one on each drawer) with necessary hardware/ fitting/ hinges etc. of approved quality (make: ebco). for installation of side unit wooden dowels and Mini fix to use for additional support.
All the MDF board are is-14587-1998 with confirm to din 68861.iso 9001- 2015 quality certification confirming to astm d 4499 standards for viscosity and thermal stability.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Poise, Premium Leatherette Chair, High Back
Dimension: 640Wx500Dx1210H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 655mm
high back 360°-degree revolving chair *The chair made of full leatherette in black colour.
it will come in matte finish in contemporary style.
details:Arms: fixed chrome finish arms with PU padding.Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat and back).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar supportMechanism: centre tilt mechanism.Only seat size is 665mm(l)x 500mm(d)x 580-495mm(h) & the back size is 665mm(l)x 580mm(h),seat maximum height is 635mm & minimum height is 540mm & back height from floor maximum height is 1210mm & minimum height is 1110mmGas lift 85mm telescopic hydraulic.Base: 650 mm shiny chrome base with nylon castors shall be 65.0 +/- 0.5 cm pitch-centre-Dia (75.0 +/- 1.0 cm with castors)
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Poise, Premium Leatherette Chair, Low Back
Dimension: 625Wx490Dx1135H mm.
Seat depth: 490mm, Back Height: 560mm
low back 360°-degree revolving chair *The chair made of full leatherette in black colour.
it will come in matte finish in contemporary style.
details:
* Arms: chrome finish arms with PU padding.
* Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat and back).
* Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, * Back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar support
* Mechanism: centre tilt mechanism.
* Only seat size is 625mm(l)x 490mm(d)x 660-535mm(h) & the back size is 625mm(l)x 560mm(h) seat maximum height is 660mm & minimum height is 535mm & back height from floor maximum height is 1135mm & minimum height is 1035mm
* Gas lift 95mm telescopic hydraulic * Base: 650 mm shiny chrome base with nylon castors shall be 65.0 +/- 0.5 cm pitch-centre-Dia (75.0 +/- 1.0 cm with castors)
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Office Desk
Table Size: 1500Wx750Dx750H mm. & Side Unit Size: 1050Wx450Dx750H mm.
Supplying and placing primary work surface overall size is 1500mm(l)x 600mm(d)x 750mm(h) 25mm thick table top made of prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue. modesty panel 18made of mm thick.
Provision of side unit of size is 900mm(l)x 450mm(d)x 750mm(h), (combination construction wire management hole with PVC grommet on table top, left side table top based on a 18mm thick side panel engineered wood & from right side unit have 2 sliding doors + 1 fixed shelve.
Side unit size 900mm(l)x 450mm(d)x 750mm(h), in provided with lock for security and handles are provided for easy of opening.
overall construction of side unit is 18mm thick along with facia of sliding shutters. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Artline, Premium Mesh Chair, High Back
Dimension: 610Wx705Dx1280H mm.
* High back 360°-degree revolving chair *The chair made of full mesh in black colour.
it will come in matte finish in contemporary style.
details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 525mm(d)x 465-565mm(h) & the back size is 440mm(l)x 740mm(h), seat maximum height is 565mm & minimum height is 465mm & back height from floor maximum height is 1280mm & minimum height is 1180mm.
* Gas lift 100 mm telescopic hydraulic. Base: 650 mm chrome base with smooth castors.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Artline Cantilever Chair
* all over size is : 510mm(l)x 630mm(d)x 990mm(h) ,
*the chair made of full mesh in black colour.
it will come in matte finish in contemporary style.
details:arms: pp fixed t shape arms .Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat).seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. only seat size is 500mm(l)x 500mm(d)x 480mm(h) & the back size is 490mm(l)x 560mm(h) ,seat height is @ 480mm.
* Fixed cantilever chair. Base: chrome plated tubular frame of cantilever type.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Jeremy Leatherette Sofa
A streamlined silhouette and plump cushions make Jeremy one of our most comfortable seating collections. Crafted from family-friendly leatherette, this sofa endures a lifetime. Clean-lined with minimal track arms, Jeremy is a perfect match for compact apartments and big spaces alike.
Material & Subtype: Premium Leatherette
Frame Material: Plywood,Solid Wood
Upholstery Material: Premium Leatherette
Seat Material: Premium Leatherette
Leg Material: Solid Wood
Finish: Matte
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Jeremy Leatherette 2 Seater Sofa
Size: 1400Wx940Dx895H mm.
-
-
-
Model: Jeremy Leatherette 1 Seater Sofa
Size: 800Wx940Dx895H mm.
-
-
-
Model: Cole, Movable Glass Coffee Table
Size: 1000Wx1000Dx400H mm.
Bit of Both. The Cole Tv Stand is a combination of wood and glass for an elegant setting. Get a matching set along with a choice of a Tv stand or a rectangular center table.
Material & Subtype: Engineered Wood - MDF,Glass - Clear Glass
Table Top Material: Clear Glass
Leg Material: Castors,Glass
Finish: Glossy
Colour & Colour Family: Clear Glass, Table Top Thickness: 10mm
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Ambrose, Veneer Side Table in Dark Oak Finish
Size: 600Wx600Dx470H mm.
The Ambrose collection emphasizes living spaces with a minimal yet sculptural appeal. This side table showcases the exotic Oak veneer tabletop showing herringbone patterns, skillfully handcrafted by Marquetry artisans. Resting atop tapered solid wood legs, Ambrose is truly timeless.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model:Smart Series/A
Table Size: 1500Wx750Dx750H mm
Side Unit Size: 1050Wx450Dx750H mm.
providing & supplying modern design modular cabin a combination of metal and wood make the products utile and a delight. Timeless design that elevates your office space table with smart storage side unit structure of spacious l-shaped tabletop offers you a generous workspace, dual-tone design in wenge/frosty white blends. Desk primary work surface use premium quality materials which give more surface area for work, table top made of 25mm thick prelaminated particle board of grade ii type iii of is 12823/latest.Table top supported on mild steel powder coated frontier slanting legs of 50x50 mm thick and connectors for wire management of size 50mm x 25mm horizontal connectors with PVC cap below legs unique designed modesty panel shall be pre laminated board with all exposed edged finished with PVC edge binding. modesty panel-shall be of 25 mm thick Pre-lam particle board , modesty has been given on the front of the main worktop which is attached with gable end baskets on the both end with ,table should have 6 module flip top box without switch & socket single cover with metal wire tray and vertical riser for wire management, on toxic MS powder coated to the thickness 50-60 microns(+/-5 micron) CRCA sheet perforated modesty panel at front side, work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue.Side unit: 1050 mm(l)x 450 mm(d)x 750 mm(h),25 mm thick side unit top made of prelaminated particle board, below side unit sliding shutter + 1 fixed shelve storage in provided with cam lock for security and MS press handles are provided for easy of sliding. Easy to maintain / warp and scratch resistant / borer and termite resistant. All metal parts should finish with epoxy polyester powder coated to the thickness 50-60 microns (+/-5 micron).
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model:Smart Series/A
Table Size: 1800Wx750Dx750H mm
Side Unit Size: 1050Wx450Dx750H mm.
providing & supplying modern design modular cabin a combination of metal and wood make the products utile and a delight. Timeless design that elevates your office space table with smart storage side unit structure of spacious l-shaped tabletop offers you a generous workspace, dual-tone design in wenge/frosty white blends. Desk primary work surface use premium quality materials which give more surface area for work, table top made of 25mm thick prelaminated particle board of grade ii type iii of is 12823/latest.Table top supported on mild steel powder coated frontier slanting legs of 50x50 mm thick and connectors for wire management of size 50mm x 25mm horizontal connectors with PVC cap below legs unique designed modesty panel shall be pre laminated board with all exposed edged finished with PVC edge binding. modesty panel-shall be of 25 mm thick Pre-lam particle board , modesty has been given on the front of the main worktop which is attached with gable end baskets on the both end with ,table should have 6 module flip top box without switch & socket single cover with metal wire tray and vertical riser for wire management, on toxic MS powder coated to the thickness 50-60 microns(+/-5 micron) CRCA sheet perforated modesty panel at front side, work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue.Side unit: 1050 mm(l)x 450 mm(d)x 750 mm(h),25 mm thick side unit top made of prelaminated particle board, below side unit sliding shutter + 1 fixed shelve storage in provided with cam lock for security and MS press handles are provided for easy of sliding. Easy to maintain / warp and scratch resistant / borer and termite resistant. All metal parts should finish with epoxy polyester powder coated to the thickness 50-60 microns (+/-5 micron).
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Back Storage Supplying, and placing in position of back storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Back Storage Size: 1500Wx400Dx750H mm.
-
-
-
Back Storage Size: 1800Wx400Dx750H mm.
-
-
-
Model: Cluster Series Office Desk
Table Size: 1500Wx750Dx750H mm. & Side Unit Size: 1050Wx450Dx750H mm.
Supplying and placing Main Table side combo storage . The Worktop is made of 25mm thick Prelaminated particle board with 2 mm thick PVC Lipping on the edges. The worktop is supported on U Shape Metal Legs 50mm x 50mm , powder coated understructure with Laminate Modesty panel. The Metal legs are connected by Metal Beams for stability and . The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Colour as per direction of Engineer in Charge. Side Storage unit is made of combination of hinged door unit and 3 Drawer unit - Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.Storage has adjustable shelves inside and cam lock, tower bolt and locking strips. The units are assembled by knock down fittings such as Minifix & Dowels.
TThe Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Back Storage Size: 1500Wx400Dx750H mm.
Supplying, and placing in position of back storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Artline, Premium Mesh Chair, Medium Back
Dimension: 610Wx630Dx1085H mm.
Seating Height: 565mm, Seat depth: 525mm, Back Height: 555mm
* Medium back 360°-degree revolving chair * *BIFMA certified chair made of full mesh in black colour.
it will come in matte finish in contemporary style.
details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar supportMechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 525mm(d)x 465-565mm(h) & the back size is 440mm(l)x 555 mm(h),seat maximum height is 565mm & minimum height is 465mm & back height from floor maximum height is 1085mm & minimum height is 995mm.
* Gas lift 100 mm telescopic hydraulic.Base: 650 mm chrome base with smooth castors. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Round Stool Overall Sizes Diagonal Leg Dia 538 mm H470 min-655max.SS 202 made sheet with spin section of thickness 1mm & should be non corrosive. It should have a diameter of 305mm,seat base is made of MS ring and rectangular tube.EN8 Screw having dia of 22 mm should be used for height adjustment of the seat base.The hub should be made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.The understructure should consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg should give a round & clean look. All the legs should be provided with 4 nos of Nylon-6 bush.All metal components should be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbial epoxy polyster powder coating . All welding should be Co2 argon welding to minimise rusting on the welding areas.Safe working load must be 135kg.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Examination couch
The examination table should be made of sturdy structure with a ratchet mechanism for tilting the backrest .Over all dimension :1830mm(L)X600mm(W)X850mm(H).Leg frame made of MS ERW tube .Leg shoew made of nylon and lying surface of MS Sheet .Ratchet of MS plate .Finishing of powder coating of wpoxy polyester .Max patient weight :135 Kg. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Bed Side Locker Over all dimension :402mmLX422mm WX840mm Ht .locker should have one cabinet and one drawer unit .both provided with CAM lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of CRCA sheet 1 mm thick and has ball slide for easy operation .Top SS 304 sheet 0.8 mm thick castors 50 mm dia ,Hamdle ABS ..powder coating of epoxy polyester.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Berry/55001, Leatherette Sofa
A modern curvaceous silhouette with flared arms and round legs. Wrapped in the comfort of premium leatherette, Berry has been a forever favourite.
Material & Subtype: Premium Leatherette
Frame Material: Solid Wood
Upholstery Material: Premium Leatherette
Filling Material: Foam
Seat Material: Premium Leatherette
Leg Material: PVC
Finish: Matte
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Berry/55001, Leatherette 2 Seater Sofa
Size: 1410Wx890Dx870H mm.
-
-
-
Model: Berry/55001, Leatherette 1 Seater Sofa
Size: 960Wx890Dx870H mm.
-
-
-
Model: Hopper, Solid Wood Coffee Table
Size: 1130Wx630Dx410H mm.
Inspired by the mid-century modern era, the Hopper collection flaunts clean silhouettes with tapered legs. Crafted with solid beech wood, the dark oak finish accentuates the distinctive wood grains. While the clear glass tabletop flaunts the charming wooden accent. The glass tabletop is made with sturdy glass, beautifully bordered by a solid wood frame. Designed for modern Indian homes, it makes a perfect spot to enjoy cozy talks over a cup of coffee.
Material & Subtype: Solid Wood - Beech Wood
Table Top Material: Clear Glass
Frame Material: Solid Wood
Leg Material: Solid Wood
Finish: Matte
Colour & Colour Family: Brown - Walnut
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Hopper, Solid Wood Side Table
Size: 680Wx530Dx450H mm.
Inspired by the mid-century modern era, the Hopper collection flaunts clean silhouettes with tapered legs. Crafted with solid beech wood, the dark oak finish accentuates the distinctive wood grains. While the clear glass tabletop flaunts the charming wooden accent. The glass tabletop is made with sturdy glass, beautifully bordered by a solid wood frame. Designed for modern Indian homes, it makes a perfect spot to enjoy cozy talks over a cup of coffee.
Material & Subtype: Solid Wood - Beech Wood
Table Top Material: Clear Glass
Frame Material: Solid Wood
Leg Material: Solid Wood
Finish: Matte
Colour & Colour Family: Brown - Walnut
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model:Serina Reception Desk
Supplying and placing in position of reception desk. 25mm thick table top of prelaminated particle board in asian maple colour. one mobile pedestal (2 drawers + 1 filing cabinet) size is 400 mm(l)x 450 mm(d)x 600 mm(h).
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Size: 8800Wx2900Dx750/1050H mm. For Help Desk
-
-
-
Size: 5800Wx900Dx750/1050H mm. For Xray Ultrasound
-
-
-
Size: 2400Wx2400Dx750/1050H mm. For Nurse Station
-
-
-
Size: 3600Wx900Dx750/1050H mm. For Report Collection Xray Ultrasound & CT & MRI & Records
-
-
-
Size: 2400Wx900Dx750/1050H mm. For Report Dispatch Room & Sample Collection Phlebotomy
-
-
-
Size: 6000Wx1800Dx750/1050H mm. For Sub Registration
-
-
-
Back Storage Supplying, and placing in position of back storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Size: 750Wx450Dx1200H mm.
-
-
-
Model:Marvel/MB/Premium : Medium back mesh chair Supplying and placing in position of Marvel/MB/Premium : medium back mesh chair in black colour with matte finish . The medium back 360° degre revolving chair with all over size is : W) 595mm X (D) 670mm X (H) 1125mm , the chair made of full mesh in black colour . It will comes in matte finsih about style type is modren. Arms : amrest is having two adjustment heights (up & down) . Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat). Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , Back : frame of design shall be curved made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar support. Mechanism : self weighted multi locking mechanism . Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 815mm(h) , seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1350mm & minimum height is 1250mm . Gas lift 100 mm telescopic haudraulic ; base : 650 mm chrome prong base is 620mm pitch center dia (660mm with castors) . The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model:Nixon/SS/3 Three Seater Waiting Area Chair Size: 1820Wx690Dx790H mm.
Supplying and placing in position of a stainless-steel visitor bench. The complete stainless-steel bench has seat & back single section. per seat length is @ 520 mm & seating height is @ 4300 mm from ground, perforated stainless steel. owing to the smooth finish, durability and tensile strength beam stainless steel made by 1.6mm thick. Seat is made by 1.2mm thick stainless-steel border with chrome plating for every seat & back; stainless steel handles chrome plated & die pressed legs at the end of chairs. Gross weight of regular 3-seater will be 34 kg. The steel grade 202 high yield strength as per is:513 & is:304 grade.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model:Nixon/SS/2 Two Seater Waiting Area Chair Size: 1200Wx690Dx790H mm.
Supplying and placing in position of a stainless-steel visitor bench. The complete stainless-steel bench has seat & back single section. per seat length is @ 520 mm & seating height is @ 4300 mm from ground, perforated stainless steel. owing to the smooth finish, durability and tensile strength beam stainless steel made by 1.6mm thick. Seat is made by 1.2mm thick stainless-steel border with chrome plating for every seat & back; stainless steel handles chrome plated & die pressed legs at the end of chairs. Gross weight of regular 2-seater will be 25kg. The steel grade 202 high yield strength as per is:513 & is:304 grade.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Blood Donor Chair Size: 1100Wx800Dx750H mm.
The Chair is a revolutionary furniture piece. It has been designed to ensure maximum comfort and relaxation during your waking hours. The chair is equipped with an adjustable back rest, which can be adjusted by a simple turn of the serrated blocks system. This means that the user can adjust the height of the back rest to the correct position for his/her body length. The chair is also equipped with an adjustable leg rest that self locks in the required position to ensure maximum comfort and relaxation.
The back rest is made from steel and can be coated with custom color using epoxy paint. The back rest has been designed as a modular system which makes it easy to replace and repair if ever damaged or broken.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Hospital sheet Patient Attendent Bed
Single Function bed which has an adjustable
backrest and a fixed lower section.
Overall Size in mm : 2268 (L) x 922 (W) x 610 (H)
Material Specification :
1. Bed Frame made from (a) MS ERW Rect. Tube of section 30mm x 60mm and thickness 1.6 mm (b) MS ERW Round tube of section 30 mm x 30 mm and thickness 1.6 mm.2. Laying Surface Frame made from MS ERW Round Tube of section 25.4mm and thickness1.6 mm.3. Head Board/Leg Board Frame made from MS Round Tube of section Æ19, Æ25.4 & Æ31.75 mm and Thickness 1.6 mm with Higher diameter tube provides a studay understracture.4. Lead Screw EN8 ACME 6 MM Pitch Thread
Rolled En8 Lead Screw,with ACME thread and6mm pitch gives good strrength, with ease of opreation.5. Handle PPCO Snap Locking Handle lever with handle body keep it in folding position when not use.6. Lying Surfaces CRCA 1.0 mm Laying Surface area consists of mattress ratainer to define the position of the mattress.
7. Castors High endurance metal series castor and provided with dual locking arrangement are diagonally placed wheel Dia 125mm & Stem dia is 22mm. Diagonal locking provides better s stability to bed in the locked position.8. Mosquito Net Ple Holder: Privision for mounting of mosquito net pole.9. IV Pole Holder: Provision for mounting of IV pole.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Thickness-Mattress: 3"+
SANDWITCH CONSTRUCTION: Round Hitlon thickness ( MM): 60
Hitlon density (Gm/dcm3): 23
Coir(Both side) Thickness MM: 20
Density (Gm/dcm3): 70, DRC (%): 22
QUILTING - COMBINATION / LAYERS:
Pilled Foam – Quilting (One Side) Thickness MM - 14
Pilled Foam Density Gm/dcm3 - 18
PU foam / EPE sheet side walling Thickness MM - 3
TOTAL MATTRESS THICKNESS-MM - 87
REXINE (GSM): 150
Note: * Finish product thickness should be measure from outer to outer surface. Tolerance +5 mm
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Office Desk Without Pedestal
office desk office desk structure of rectangular shape .
Table top 25mm thick table top made of 25mm thick prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue . modesty pannel made of 18mm thick, wire management hole with pvc grooment on table top.
three layer prelaminated particles board(wood product) of grade ii type iii of is 12823/latest.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Table Size: 1500Wx600Dx750H mm.
-
-
-
Table Size: 1200Wx600Dx750H mm.
-
-
-
Table Size: 1050Wx600Dx750H mm.
-
-
-
Model: 65 Series Linear WorkstationWith Drawer Pedestal
Overall Size: 9000Wx600Dx750/1200H mm.
Size: 1500Wx600Dx750/1200H mm. Each Seat
Supplying and placing in position of sliding tile base modular Workstation of 1200mm(H) as per photograph/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Also a provision of Pedestal Unit (size:- L-400mm x D-450mm x H-725mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & central Locking arrangement. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: 65 Series
Supplying and placing in position of sliding tile base modular Workstation of 1200mm(H) as per photograph/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: 65/5x5 C, 2Seater Size: 1500Wx3000Lx600Dx750/1200H mm.
-
-
-
Model: 65/5x5, 1Seater Size: 1500Wx1500Lx600Dx750/1200H mm.
-
-
-
Model: MOD Cafeteria Table
Size: 1800Wx900Dx750H mm.
Manufacturing supply & Installation of Stainless Steel Dining Table.The top shall be made of SS 304 grade Stainless Steel sheet of min. 1.5mm thick to Easy clean and maintain hygiene, moulded by Hydraulic/ CNC Metal sheet bending machine supported on 4 nos. of legs made of SS 304 grade square tube minimum leg size of 50mm X 50mm X 1.2mm thick. SS Table top shall be supported on 18mm thick commercial ply (laminated on bottom) for strengthening. SS legs should be connected with SS 202 grade connectors/ cross member below the table top of min. size 25mm x 25mm for extra strength. Legs bottom/ ends should be closed with plastic buffers/ caps. The SS table shall be moulded by the CNC Pipe/ tube bending machines, CNC Metal sheet bending machine and SS welding with Robotic Welding Automatic Machines etc. for better finish, durability and aesthetics
NOTE: ±10% Variation is allowed in size, if it is standard product with particular Model Name of the OEM / mentioned in the company broachers and rate list. OEM shall display sample of this item as per BoQ, Images & Specifications during Stage-II evaluation. If OEM have any standard model of this item having superior/ rich specification & design better than proposed specification & design of this item and ready to provide in quoted rates against this item, shall be displayed by OEM during Stage-II evaluation.
Packing Material : Each Dining Table should be packed in separate cartoons designed for particular model by OEM with proper use of Thermocol, Polythenes and mentioning the name of model & specification on top of cartoons.
NOTE: The sample shown at site during Stage-II evaluation, shall get modified by the OEM after award of work without claiming any additional cost, as per the requirement of space in building & client and to improve the aesthetics as per modern
/ elegant design concept.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: COCO, Cafeteria Chair
Size: 381Lx419Dx839H mm.
Color: Red/Blue/Yellow/Black Pvc Chair - Fixed Arms - Pvc Legs The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Auditorium Series With Wooden Tablet
Seat size – 440 mm(W) * 475 mm (D), Back size – 460 mm(W) * 775 mm (H),
The seat will be auto tip-up type and folds when not in use, Arm type – Individual, Right side arm will be foldable writing tablet (wooden), Left side arm is cup holder.
The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”
-
-
-
Model: Obelisk Podium
Size: 550Wx550Dx1200H mm.
Providing & supplying vintage podium top & side panels made in 18mm thick prelaminated particle board of grade ii type iii of is 12823/latest with machine pressed exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade fixed duly pasted with the assistance of edge banding machine at 200 degrees Celsius.
The podium houses a flat table top to keep notes handy while allowing for wiring and a stand for mic. the podium design is vintage with fine moulding along the edges of the frame. using a combination of prelaminated particle board obelisk is a fabulous example of a podium setting to deliver speeches and lectures at halls and
auditoriums.
Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.
The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIANDESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member ofBIFMA and One or more products of the OEM should be certified as BIFMACOMPLAINT as well as BIFMA LEVEL certified and an official productlink/screenshot of the product listing's must be provided from www.bifma.org"
-
-
-
Model: DWS Conference Table
Size: 8400Wx1100Dx750H mm. providing & supplying modern design 15-seater conference table, table top offers you a generous workspace, desk primary work surface use premium quality materials. table top made of 50mm thick which give more surface area for work, prelaminated particle board, tabletop supported with 75mm thick (6 mm + filler +6 mm) BSL steam beech veneer with sb-8 polish in brown-wenge colour on prelaminated particle board of grade ii type iii of is 12823/latest.
Construction below table modesty height @ 200 mm,15mm thick BSL steam beech veneer with sb-8 polish.in between both the supporting panels length is @ 1480 mm, over all table height is @ 750 mm and the side panel size is 800 mm (l) x 700 mm(h). our work surface furniture is finished with exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade, fixed with hot melt glue.
The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIANDESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member ofBIFMA and One or more products of the OEM should be certified as BIFMACOMPLAINT as well as BIFMA LEVEL certified and an official productlink/screenshot of the product listing's must be provided from www.bifma.org"
-
-
-
HANDRAIL, CRASHRAIL AND CORNER GUARD
-
-
-
Providing & Fixing 150 series high impact resistant surface mount Corner Guard having Vinyl Snap on cover (Lead Free) of .080" (2mm) thickness shall be extruded from chemical and stain resistant polyvinyl chloride with the addition of impact modifiers No plasticizers shall be added (plasticizers may aid in bacterial growth). Surface shall have a Pebblette texture for scratch resistance. Continuous Aluminum Retainer of .070" (1.8mm) thickness shall be fabricated from 6063-T5/T6 aluminum, with a mill finish. Dimensions to be of 3" (76mm) x 3" (76mm), 90 degree. The rigid vinyl profile shall resist an Impact Strength of 30.2 ftlbs/ inch as per ASTM D-256-90b and shall cis not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It shall include standard quantity, as per manufacturer, of Molded Top / End Caps.
-
-
-
Providing and fixing 700 series superior impact resistance Wall Guard Vinyl (Lead Free) Snap on cover of .080" (2mm) thickness shall be extruded from chemical and stain resistant polyvinyl chloride with the addition of impact modifiers. No plasticizers shall be added (plasticizers may aid in bacterial growth) cis. Surface shall have a Pebblette texture for scratch resistannce and Continuous aluminum retainer of .080" (2mm) thickness shall be
fabricated from 6063-T5/T6 aluminum, with a mill finish. Dimensions to be of 7 3/4" (197mm) height x 1" (25mm). Inner snap-on vinyl impact black bumper of .080" (2mm) thickness x 3.930" (100mm) width x 21mm height which shall be extruded from chemical and stain resistant unplasticized polyvinyl] chloride (uPVC). The system shall resist an Impact Strength of 45.5 ft-lbs/inch while producing no visual blemishes upon the vinyl cover surface and no deformations in the aluminum retainers, as tested in accordance with applicable provisions of ASTM F 476-84, paragraph 18, Impact Test and shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It shall include standard quantity, as per manufacturer, of Molded End Returns.
-
-
-
Providing and fixing 3110 series Handrail with integrated vinyl wall guard having Rigid Vinyl Snap-on cover (Lead Free) of .080" (2mm) thickness extruded from chemical and stain resistant unplasticized polyvinyl chloride (uPVC) with the addition of impact modifiers. No plasticizers shall be added (Plasticizers may aid in bacterial growth). Surface shall have a pebblette texture for scratch and stain resistant with rigid vinyl cover mounted on a sturdy continous Aluminium Retainer of .080" (2mm) thickness that shall be fabricated from 6063- T5/T6 Aluminium with a mill finsh. Dimesnions to be 6-1/8 " (155mm) height x 1-1/2" (38mm) full round gripping diameter, system extends 3-1/8" (79mm) from the wall. Integrated vinyl cover, 4" (101mm) high. Inner snap-on vinyl impact black bumper of .070" (1.8mm) thickness and 2-1/4" (57mm) high shall be extruded from chemical and stain resistant unplasticized polyvinyl] chloride (uPVC). The system shall resist an Impact strength of 45.5 ft-lbs/inch while producing no visual blemishes upon the vinyl cover surface and no deformations in the aluminum retainers, as tested in accordance with applicable provisions of ASTM F 476-84, paragraph 18, Impact Test cis. The rigid vinyl shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also
conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It shall include standard quantity, as per manufacturer, of Molded Mounting Brackets / End Returns.
-
-
-
BUILDING MANAGEMENT SYSTEM
-
-
-
IP DIGITAL CONTROLLERS, INTEGRATOR, SOFTWARE :
-
-
-
BACNet IP/ (open Protocols) Direct Digital Controllers with minimum of 12 I/O points, The controllers shall be, UL and BTL certified (vendor shall submit BTL UL certified, CE listed Certificate) with 32 bit microprocessor, real time clock, calendar & programmable memory with year month day, real time clock & 1 second scan time. DDC work on 230VAC / 24V AC/DC are preferred, The Controller shall have built-in Ethernet ports as per technical specification. The networkable DDC's shall be capable of peer to peer communication with lockable MS mounting cabinets duly powder coated connector strip, controller / router / system interface controller / PC and shall communicate with the building LAN directly, internal wiring and space to house controller & relays, connector strip step down transformer, MCB, internal wiring. (Contractor shall confirm his I/O provision w.r.t requirement on basis of data point) on ASHRAE approved BACNet protocol only as per IO Summary. The Controller shall have built in memory to save graphics & logic for the connected points. The each controller shall have minimum 15% spare IO capacity, Multiplexer (Mux) / AI to DI / DI to AI not acceptable.
-
-
-
DDC controller for chiller plant, primary pumps, secondary pumps, condenser pumps, cooling tower, heat pump, heat generator
-
-
-
DDC controller for AHU, HRU & TFA
-
-
-
DDC controller for ventilation
-
-
-
DDC controller for PHE
-
-
-
DDC for electrical
-
-
-
Supply, installation, testing and commissioning of UL-916 certified, BTL/CE listed certified, Hardware Bacnet IP (open Protocols) Integration units, to connect individual 3rd party microprocessor system controllers like Chillers & fans etc. the unit shall be capable of integrating all mentioned devices on BACnet, Modbus & LON etc.as per distribution given below :
-
-
-
Integration unit for Chiller, cooling tower, Pumps, AHU, FCU, WTP, STP, RO, ELE, UPS & lift with 15% spare point as attached I/O point summary.
-
-
-
Supply, installation, testing & commissioning of DALI/KNX/other gateway which shall connect the cross-function communication bus with the DALI/KNX/othe bus designed exclusively for lighting control. Luminaries with DALI electronic ballasts can therefore be integrated into a bus complete system in the form of a subsystem and operated by a wide range of available devices.
ii. The gateway shall serve as the DALI/KNX/othe master and power supply for the connected electronic ballasts. Up to a maximum of 128 electronic ballasts according to IEC 60926 in a total of 16 groups can be switched, dimmed or set to a defined value.
iii. Brightness values or error messages in the DALI/KNX/othe devices can be sent to the BUS and visualized on display units.
iv. The DALI is commissioned and configured with the integrated display and operator buttons.
v. DALI commissioning and configuration shall be performed as follows:
a. via the device
b. via a software tool (free of charge)
c. via the integrated web server
d. via a portable web panel or a PDA
e. via two binary inputs, e.g. for connecting push-buttons to the device (building site operation).
-
-
-
Supply installation testing and commissioning of DALI/KNX/othe programmable keypad with customized programming, with proximity sensor in built, flush device mounting, with 4 function keys, Night mode: LEDs light up with reduced brightness, Scene saving, Behavior and brightness of the status displays, Backlit symbols, should be with Push-button customizable from 1 to 4 operating buttons and status display and suitable for switching, toggling and dimming.
-
-
-
Supply, installation, testing & commissioning of DALI/KNX/othe Power supply, of DC 30V for one line with up to 64 devices. With integrated choke to decouple the power supply from the bus, as well as switches to interrupt the power supply and reset the bus users connected to the line. It is short-circuit resistant, and features a voltage and current limiter. Excessively high output currents are indicated by a red display (over current). The input power supply shall be rated at 220V AC frequency 50 Hz.
-
-
-
Supply, installation, testing & commissioning of DALI/KNX/othe logic controller which allows to connect different standards and protocols for building automation and energy metering. based on a web server application. Advanced logic functions are possible in order to optimize energy efficiency and comfort. event controller, which sends a notification/message in case of any failure or issue. IP connection for communication in BACnet server, Modbus and web services. Modbus serial port links to any devices. RS232 connection to control any serial communication compatible components. Support event-based scripts, Scheduled scripts, Resident function scripts & Scripting repository and built-in helpers.
-
-
-
Supply, installation, testing and commissioning of the web Based Graphical Software with unlimited multi user with simultaneous minimum 1 user Web Based Graphical Software meeting the requirements in the Given I/O Summary and technical specifications including configuration and facility to create / provide the graphic mapping for all I/O Summary points , animate the Graphics, Navigation between pages, display of logs, changing the time zones, popup alarms, configurable password protection for Building Mgmt System as per Specifications. Software shall be able to communicate with open protocols like BACNet, Modbus devices simultaneously. Offered software shall have builtin feature for EMS, Alarming, reporting, scheduling & trending. The software shall have unlimited software & Hard ware capacity. During operation & maintenance if any controllers required to replace than software shall have feature to download logics in new controller as of old one, from control station, once the old controllers ip is maped in new one.
-
-
-
The hardware viz., GSM modem etc., and required software for SMS alert on mobile phones shall be included with PC hardware and BMS software.
-
-
-
Commissioning of Energy Management Dashboard & Report shall be done from the BMS graphics software, The Data Into Separate Application Database (SQL Server) for Analysis shall be created, System Should Have The Following Key Features:
This Software should have the following Key features:
A) Energy Management -
1. Data monitoring and reporting in real time no delay with 2min.
2. Energy Dash-Board shall be Customizable. 3. Energy Report Generation and all kind of report of meters Against Selection of Time And Frequency. 4.Energy breakdown and consumption patterns for DG & grid supply
5.Should have the compatibility to set energy consumption targets, alarm and pricing.
6.Should have the compatibility to compare historical trends, benchmark data
7. Web Enabled.
8.Email / mobile SMS Option Available 9. Multiple Database Sources / Site Can Be Integrated.
10. Trends and previous History can be generated (The bidder has to provide the proof of Evidence to meeting the above requirments & Reports generation as per mentioned into the Data Point Summary & Technical Specification).
-
-
-
B) Water Management - 1. Data monitoring and reporting in real time no delay with 2min.
2. Water meter Dash-Board shall be Customizable. 3. Water meter Report Generation and all kind of report of meters Against Selection of Time And Frequency. 4.Water meter breakdown and consumption patterns.
5.Should have the compatibility to set water consumption targets, alarm and pricing.
6.Should have the compatibility to compare historical trends, benchmark data
7. Web Enabled.
8.Email / mobile SMS Option Available 9. Multiple Database Sources / Site Can Be Integrated.
10. Trends and previous History can be generated (The Bidder Has To Provide The Proof of Evidence to Meeting The Above Requirements & Reports Generation As Per Mentioned Into The Data Point Summary & Technical Specification and software shall be meet the requirement required by ISO and UL).
-
-
-
Hand held Portable Operator Terminal
-
-
-
SUPPLY, INSTALLATION, TESTING, COMMISSIONING OF INPUT AND OUTPUT SENSOR AS FOLLOWING :-
-
-
-
Should be UL-916 certified, CE listed.
-
-
-
Should have individual serial numbers with certificate.
-
-
-
Should have the site traceability scalibration and validation.
-
-
-
Should be of the same make to ease installation, commissioning and post handover services.
-
-
-
Should have manufacturers’ sales and service office in India mandatorily.
-
-
-
Certificate and test copies to be submitted for approval.
-
-
-
Immersion sensors shall be provided with a separable stainless steel thermowell with suitable threaded connection with ½” NPT (M) connection with length of 5”, sensor shall have rigid 6.35mm (0.25”) diameter stainless steel probe with minimum length 50mm 2” and various length as per site condition with holding pressure rating of 10 kgf/sq cm consistent with the system pressure installed with measuring range 32-160 deg f, sensor shall be provided with suitable mounting kit, sensor shall have accuracy ± 0.3 deg. operating temperature of the sensor shall be -20 to 105°C (-4 to 221°F)
-
-
-
Duct mounted pressure Sensor provided across air for indicating the air pressure with 0-2000pa field-adjustable, sensor shall have response time of minimum 250ms or better with accuracy 1%, output 4-20ma, 0-10vdc, sensor shall be offer UL94-5VB, IP54 approved housing, withstand ambient temp of -0ᵒC to 70ᵒC.
-
-
-
Water pressure transmitter provided across water for indicating the water pressure with a zero and span field-adjustable, sensor shall have SS316 diaphragm construction and SS316 body for static pressure 5X, transmitter also have range of 0-10 Bar (2.9 to 300 PSI) with accuracy ±0.5%, voltage rating shall be minimum of 3A @ 230VAC inductive 0.1 Amp @ 230VDC, sensor shall be offer UL/CE #E85974 approved, withstand ambient temp of -20degC to 70degC.
-
-
-
Water level switch for indication high and low level of tank, sensor shall be offer UL/CE #E85974 approved, withstand ambient temp of -20degC to 70degC.
-
-
-
Water transmitter for indicating two type of level (H/L), sensor shall have stainless steel enclosure SS316L wetted parts corrosion protected, sensor should sense the pressure minimum of 2 bar with + 0.25% accuracy and + 0.5% error correction sensor shall have IP 68 protection with minimum of 10mtr corrosion resistant Cable, sensor shall offer UL/CE listed.
-
-
-
Over flow Indicator shall be provided to measure the over flow at water tank with ABS plastic body IP 66/68 protected, 9V-0-9V AC at 300 mA operated with 1 output relay to transmit the signal to DDC controller.
-
-
-
Differential Pressure Switch provided across water for indicating the water flow range of 0.2 to 4.5 Bar (2.9 to 65.25 PSI), sensor shall be capable to withstand static pressure of 12 bar and temperature of 100°C. The repeatability should be ±2% or better. Contact rating shall be minimum of 5A 220VAC + 10%, enclosure shall have IP54 Protection with option of Direct and Panel Mounting.
-
-
-
Differential pressure switches across the Air for indicating the Blower status, Pressure differential – 4–40 mm. The switch shall be with connecting tube and metal bends for connections to the duct. The housing shall be IP 54 rated.
-
-
-
Differential pressure switches across the filter for indicating the filter status, Pressure differential – 4–40 mm. The switch shall be with connecting tube and metal bends for connections to the duct. The housing shall be IP 54 rated.
-
-
-
Differential pressure transmitter across air for indicating the pressure with a zero and span field-adjustable, sensor shall have SS316 diaphragm construction and SS316 body for static pressure 5X, transmitter also have range 2.9 to 300 PSI) with accuracy ±0.5%, voltage rating shall be minimum of 3A @ 230VAC inductive 0.1 Amp @ 230VDC, sensor shall be offer UL/CE #E85974 approved, withstand ambient temp of -20degC to 70degC.
-
-
-
Duct mounted temperature sensor provided across air for indicating the air flow, sensor probe length shall be sutaible for duct mounted minimum of 1ft per ft² of duct, the sensor road shall be Pt 1000 sensing element with SS304/SS316/iNTC20K stemshall be of copper sheathed construction, sensor shall have temperature accuracy of ± 0.3ᵒC, sensor with fireproof ABS housing & UL94-V0 - IP65 (NEMA 2) and Housing shall be suitable for duct application, Operating Temperature of the sensor shall be -20 - 60°C (-4 - 140°F).
-
-
-
Outside T+RH shall be provided with fireproof ABS weatherproof housing rigid sensors sensor with UL94-V0, IP65/66 Pt 1000 elements sensor to be laser trimmed thermoset polymer based capacitive type and 24 VAC/DC operated, sensor shall have 4-20 mA/0-10 Vdc or 0-5 Vdc field selectable output proportional to relative humidity range of 0-100% with BMS compatibility, sensor elements shall be NTC 20k or Pt1000 with ±0.3°C accuracy 2% RH accuracy 5-95%, operating temperature of the sensor shall be - 40°C to 85°C (-40 to 185°F), zero and SPAN adjustment facility available, and 60 micron HDPE filter protects the sensor for contaminants sensor shall offer UL/CE listed.
-
-
-
Duct mounted PM2.5 sensor with sensing range 0-500 ug/m3 ±10%, with sensing optical laser sensor to responded directly DDC 1sec, outputs of sensor shall be 4-20 mA/ 0-10VDC or Modbus RS485, sensor enclosure shall be IP65 for duct or IP32 for Wall Mount with UL94V0 fireproof enclosure, Operating temperature shall be 0 to 50 deg C with 0 – 99% RH (Non-condensing).
-
-
-
Carbon monoxide (CO) sensor wall/duct mounted shall be provided with electro chemical type with range of 0-250 ppm with 5% accuracy, coverage of CO sensor shall be greater than 465 m2, sensor shall have 4-20 mA or 2 – 10VDC output, Sensor shall be ANSI/UL-2034, UL-2075, E240671UL/CE certified, operating condition of sensor shall be -10°C to 50°C with fire retardant ABS UL94-V0 enclosure.
-
-
-
H2 sensor for detecting hydrogen below 1% during batteries charge
-
-
-
Flame proof Differential Pressure Switch provided across pump for indicating the oil flow range of 0.2 to 4.5 Bar (2.9 to 65.25 PSI), sensor shall be capable to withstand static pressure of 12 bar and temperature of 100°C. The repeatability should be ±2% or better. Contact rating sahll be minimum of 3A 220VAC + 10%, enclosure shall have IP65 Protection In Diecast Aluminium Enclosure with option of Direct and Panel Mounting.
-
-
-
Flame Proof Flow Meter shall be a single electro-magnetic type inline flow meter able to work in conductivities above 5μS, meter shall be constructed of stainless steel with PTFE Lining and electrode titanium material with Die cast aluminium IP67 Enclosure and LCD Display, flow meter shall have the accuracy + 0.5% with velocities from 3 to 30 fps, flow meter shall have output 4-20mA Signal and MODBUS simultaneously, Flowmeter shall have the mandatorily of units l/m, l/h, m3/m, m3/h, gpm/h, gpm/m.
-
-
-
Flame Proof level transmitter elements shall withstand continuous operating conditions plus or minus 50% greater than calibrated span without damage, sensor shall have SS316L / PTFE wetted parts, proof pressure of 10 bar and burst pressure of 20 bar minimum, sensor shall be complete with 4-20 mA output, with over voltage protection. The accuracy shall be ±0.25% or better. The total error band shall be ±0.5% or better, transmitter shall have explosion proof enclosure IP67 protection with CCOE / Equivalent.
-
-
-
Flame proof level switches shall have SPDT Contacts, level switch shall be Float operated, with top mounting, level switch shall have SS316L flameproof probe switches proof pressure of 10 bar and burst pressure of 20 bar Minimum, accuracy shall be ±0.5%, switch shall have IP68/67 protection,with corrosion resistant cable SS316L Probe, switch shall be 15A, 230VAC, Fire retardant ABS enclosure.
-
-
-
Flow Meter shall be a single electro-magnetic type inline flow meter able to work in conductivities above 5μS, meter shall be constructed of stainless steel with PTFE Lining and electrode titanium material with Die cast aluminium IP67 Enclosure and LCD Display, flow meter shall have the accuracy + 0.5% with velocities from 3 to 30 fps, flow meter shall have output 4-20mA Signal and MODBUS simultaneously, Flowmeter shall have the mandatorily of units l/m, l/h, m3/m, m3/h, gpm/h, gpm/m.
-
-
-
British thermal unit meter shall be provided for measuring BTU/Hr or KW Configurable of water thermal energy totalizer with 0.02+ or 0.05% accuracy , The Flow meter shall be IP 67 protected and the Display Unit shall be IP 54, BTU meter shall have RS-232/485/MBUS communication port for third part integration and inbuilt storage capacity of energy minimum of 15 days after communication beak with CPM/BMS system, The BTU Meter should work on Batteries with a minimum life of 5 years. Remote display with minimum 5 meter cable with option of mounting it on the meter, Operating temperature of meter shall be 1ᵒC to 90ᵒC & 95% RH Non condensing.
-
-
-
Current relay shall be provided with fireproof ABS/PC enclosure, input and output isolation via current transformer, accuracy 2% of full-scale max, temperature rating of –150C to 500C (5 to 122 °F) UL94 V-0, response time of relay shall be 200 ms typical or less, relay shall be UL/CE listed.
-
-
-
Communication thermostat compatible with hot & cold coil
-
-
-
CONDUITING , WIRING AND CABLING :
-
-
-
Supply installation testing & commissioning of Unarmoured shielded twisted pair 2C x 1 sqmm FRLSH cable for field sensor signals, bare copper conductor not less than 14AWG and for 50Vpower, outer sheath black colour. 300/500 volts, including end terminators, saddles, clamps with screws etc. for fixing on wall/ceiling or on cable trays complete as required complete as required with all mounting accessory for data communication.
-
-
-
Supply installation testing & commissioning of Unarmoured shielded twisted pair 4C x 1 sqmm FRLSH cable for field sensor signals, bare copper conductor not less than 14AWG and for 50Vpower, outer sheath black colour. 300/500 volts, including end terminators, saddles, clamps with screws etc. for fixing on wall/ceiling or on cable trays complete as required complete as required with all mounting accessory for data communication.
-
-
-
Supply installation testing & commissioning of Unarmoured shielded twisted pair 3C x 1.5 sqmm FRLSH cable for Powering DDC, Actuators., bare copper conductor not less than 14AWG and for 50Vpower, outer sheath black colour. 300/500 volts, including end terminators, saddles, clamps with screws etc. for fixing on wall/ceiling or on cable trays complete as required complete as required with all mounting accessory for data communication.
-
-
-
Supply, installation, Testing & Commissioning of 4pair 8wire color identification, 22-26 AWG, solid copper conductor unshielded un-armoured cat-6 cable along with RG-45 connector for DDC controller and integrator comply with ANSI/TIA-568/569-B/C, the storage temperature of cable shall be -10ᵒC ~ +60ᵒC, operating temperature -5ᵒC - +70ᵒC Complete with all mounting accessories required for completion.
-
-
-
Supplying, installing and jointing of MS/GI conduits/flexible conduit on surface or concealed complete with MS junction boxes, cover plates, MS bends, GI saddles, base and other accessories all made in MS with GI screws as required to complete the job. Exposed conduite shall be painted with red enamel paint for identification.
-
-
-
25mm MS conduit
-
-
-
25mm GI conduit
-
-
-
20mm MS conduit
-
-
-
20mm GI flexible conduit
-
-
-
CENTRAL CONTROL STATION:
-
-
-
Supply, installation, testing & commissioning of the central control station consisting of the following :
-
-
-
BMS Server: Xeon E5-1650 v3 Processor, Memory of 32 GB, 8x 1TB Professional / Enterprise HDD, 2 GB Graphic card of Resolution 2560 x 1600 with Onboard Intel 4600 HD, Microsoft Windows 10 or above 2008 R2 64 bit pre-installed Embedded Server OS, Redundant power supply etc. 10/100/1000 Mbps Ethernet card, USB connection & internal modem, Enterprise MS office, Web server software, DVD-ROM Drive (with RAM), 100/1000 Mbps NIC for Network connection and anti virus software with 20" colour graphics LED monitor. Accessories included Optical Mouse, Key Pad, A4 B/W printer with the above BMS System configuration.
-
-
-
BMS workstation - i7-7920HQ 3.93GHz Processor 8mb cache memory, 16GB RAM, 1TB HDD SATA Drive extendable upto 16 TB, Windows 10 or compactable with BMS software, DVD R/W, Integrated Intel HD graphics 530 and NVIDIA Quadra NVS 315 1 GB PCIE x 16 LP supporting 4 Monitors, LAN/Ethernet :2 x 1Gbit CNA via Midplane to Ethernet Connection, with 27" LED Monitor with HDMI port
-
-
-
Notes:
-
-
-
1 AHU per controller shall be programed, controller shall have minimum of 12 Input/output points and further it can be increased based on selection of DDC and as manufacturer recommendation as approved IO summary.
-
-
-
Above indicated cable quantity tentative, contractor need to calculate cable during submission, the actual quantity of cable shall be as per the selection of DDC configuration, the contractor to confirm the quantities before quoting the job. Incas of any variation during execution, the vendor shall bear the cost.
-
-
-
2&4x1.5sqmm cable for field devise is consider 25mtr per hard point and 3mtr per soft point and cat-6 15mtr per DDC & 5 mtr/Integrator.
-
-
-
Each DDC/integrator shall have minimum of 15% spare points for future expansion, If I/O point quantity may get revised during finalizing/commissioning of BMS tender that can be capture during execution without additional cost implication to client.
-
-
-
List of approved makes shall be refer for submission, if any deviation the contractor shall inform before submission.
-
-
-
All historical data log/events of BMS system shall be maintained minimum 365 days. Data should be saved in hard drive design for BMS and hard drive backup shall be taken before it expire and data backup should be kept at least minimum of 1825 days.
-
-
-
All controllers/integrator offered by BMS contractor shall be UL/FM&BTL listed and BIS approved.
-
-
-
Contractor shall submit his/her offer along with Catalogues of controllers / integrators / field devices of the product defined in make list and individual item model no.
-
-
-
Contractor shall provide schedule of all items in a format indicating the make and model & listing of the component UL/EN/FM/BIS approved.
-
-
-
Procurement of equipment shall be done after approval of equipment technical data sheets, if and deviation found the contractor need to replace the equipment without any extra cost to client.
-
-
-
Procurement of cable shall be done after approval of shop drawing.
-
-
-
Quantity of cable/conduits shall be on running meter, vendor to confirm the quantities before quoting the job. Incase of any variation is during execution, the vendor shall bear the cost.
-
-
-
Quantities shall be checked at site and approval shall be taken from the site Engineer/charge before procuring the materials.
-
-
-
“SLD is provided for reference only & for minimum consideration”. Actual work shall done on contractor approved shop drawings.
-
-
-
Contracotr shall make sure that supplied system is compatible with system.
-
-
-
All equipment, components etc (for e.g. DDC, Integrator and devices Fiber cable, UTP cable, L2 switch, LIU, Cable tray, Cable terminations, etc.) should be compatible to operate in the environment having gases like "Hydrogen sulfide, ammonia, methane, esters, carbon monoxide, sulphur dioxide and nitrogen oxides etc", without any impact on the life of the same, contractor should consider the all safety easure/precautions/ambient conditions while quoting.
-
-
-
Biomedical Waste Disposal WORK
-
-
-
SITC of Bio Medical Waste management system should chamber volume Capacity 300-500 liters. The System should be based on MACS Technology. Microwave Assisted Cold Sterilization which disinfects/ sterilizes the hospital by-products at 70oC using the dielectric principle of non-contact irradiation process, which directly hits the bacteria/ fungi/ viruses/ spores vacuoles (which contain the largest water content) vibrating it so rapidly that it creates friction and ruptures the cell-wall of the bacteria/ fungi/ viruses/ spores vacuoles.
As per technical Specification document.
-
-
-
Integrated Online Waste Shredder (20 Kg / hr.): Supply, installation, testing & commissioning of Waste Shedrer Capacity : 20 Kg/hr
Number of Blades : 10 (Stainless Steel)
Feed Width : 250 X 280 mm
Blade Length : 250 mm
Number Of Motors : ONE
Rotor Diameter : 150
Throat Size : 250 X 280
Sieve Hole Size : 12 mm
Control Panel : YES
Speed of Rotor : 100 RPM
Automation : Semi-Automatic
-
-
-
SIGNAGES
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Door/Wall.400 x 125 x 12mm
-
-
-
Providing a signs made as using Cosign India make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is double sided 50 mm depth profile with media accomodation depth of 6 mm media of ACP acrylic upto 5 mm thickness can be pasted directly on frames or attched on frame with help of dual lock tape.Sign can be edge lite with help of edge lite led modules ,led of LUCOLED make EL31 , fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Ceiling1200x300x50mm
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Door/Wall.v300 x 125 x 12mm
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 Years warranty under normal working conditions.Sign is double sided with 2 aluminium profiles connected with each other with 2 plastic moulded endcaps.Galvanised iron multistrand twisted 2 mm diameter wire (upto1.5 meter in length) with Stainless steel eco-suspension clips screw fitted directly in ceiling (rigid base) engaged with wire stainless steel eco suspension clips with wire adjustment mechanism.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Ceiling.600x187x20mm
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 Years warranty under normal working conditions.Sign is double sided with 2 aluminium profiles connected with each other with 2 plastic moulded endcaps.Galvanised iron multistrand twisted 2 mm diameter wire (upto1.5 meter in length) with Stainless steel eco-suspension clips screw fitted directly in ceiling (rigid base) engaged with wire stainless steel eco suspension clips with wire adjustment mechanism.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Ceiling.1200x187x20mm
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.1000x2000x15.mm
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.750x1500x15
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign flip profiles with 32 mm visible border.Sign has high quality plastic moulded base with slightly flexible in nature, with wall mountiing screw position hidden beneath the flip profiles. and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.451x625x20mm
-
-
-
Providing a signs made as using Cosign india make .Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media (vinly) warapping by virtue of design of profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall/Door.156x156x12mm
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall/Door.450x156x 12
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall/Door.300 x 125 x 12mm
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.250x187x12
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with Lifetime warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.350x 156 x 12mm
-
-
-
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.300x156x12mm
-
-
-
Providing ready sign & fixing at location a Cosign make emergency exit sign- illuminated, surface mount (wall or ceiling) Dual sided made up of plastic material , battery backup of 3 hours (180 mins) .Battery life of 300 cycles of charge & discharge Li- ion battery 3.7 Volt, 100 mA, Charge time of 24 hours. Input voltage 220-240 Volt A.C, 50/60 Hz. Viewing distance 30 meter, degree of protection IP20 (rating for protection against solid object upto 12 mm) white light colour full back (white colour) LED illumination with green white coloured graphic inserted on both sides on 0.4 mm PC (sizes, texts, symbols or graphics as per standard safety norms & regulations) graphic options of -left ,right, up staircase down staircase. Test facilty button self test plus auto self test, opreration in maintained and non maintained mode (power saver mode).Sign with 12 months warranty for electric circuit & 6 months warranty for battery. Sign provided with dual mounting arrangement of mounting on wall & celing both ( with flat rigid support/base).Sign is including all connection wires (upto 1 mtr) & high tensile strength zinc coated self tapering screws (4 nos with screw wall plastic packing), installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Ceiling.310x225x55mm
-
-
-
Providing and fixing the LED backlit sign shall comprise of a logo of required and channel letters in required fonts of Hindi and English in specified Font Height depicting the name fixed on either side of the logo supported on a rigid supporting system in steel. Channel letters will be made out of 2mm thick Aluminum sheet to make it 3D Channel letter and front face of channel letter/logo will be fully covered with 5mm clear/frosted acrylic sheet which will be further fully covered with 3M vinyl film with UV printing of desired shade as approved by engineer-in-charge and internal lighting arrangement in channel letter will be using LEDs LUCOLED complete. The signage should be free from hot spots and may have a diffuser film in order to achieve a desired effect. Providing necessary supporting system comprising of mild steel members of required size and lengths as per drawings. Polyurethane painting of the MS angles, MS tubes, and to required colour, mounting at the required locations on the building. Channel letters sign are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.1.2 MTR.HEIGHT Façade Channel Letter (RIIMS OPD BLOCK)WALL MOUNTING TYPE
-
-
-
Providing and fixing at location a signs M.S internal hollow tube structure using Cosign Make- Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with Lifetime warranty under normal working conditions. Sign is including all extruded aluminium profiles including i) 4 base profiles mill finished glossy appearance or texture, base profile with slots to accomodate 50x 50 mm , 100x50 mm or 150x 50 mm,(to create max depth of 200 mm from either of the combination aftet mounting base & cover profiles, M.S structure & 'V' notch groove to guide self tapering screws,directly to be screwed with ,Internal M.S structure with help of stainless steel high tensile strength zinc coated self tapering CSK screws (length as per requirement) ii) 4 cover profiles of eliiptical shape premium anodised with intel- locating faciltiy with base profile for posiotioning. to be screwed with base profile (screws not visible from outside) after cover profile is mounted to base iii) Top & bottom ACP egde profile premium grade anodised to cover edges of ACP free mounting without drilling or screwing. iv) ACP connect profile with minimum display free mounting without lockuing & drilling. etc ,Ultra violet print on ACP or ACRYLIC sheet can be done. Also, arrangement is done to (ACP or Acrylic 3 mm thick can be Inserted in Cosign totem profile slots). Top hat asper profile shape (aluminium 2-3 mm thick) is used to cover top part, 2mm thick opaque white acrylic(or clear)can be pasted on text panels as numbers with help of 3M make adhesive.also LED (Back lite) modules or edge lite modules. CosignTotem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.ENTRY EXIT TOTEM SIZE-2500x900x300 GROUND Mounting Type.
-
-
-
FACADE CLEANING SYSTEM
-
-
-
Design, Supply, Installation, Testing & Commissioning of Appletree Make - Monorail System with Double Suspension Cradle
-
-
-
Double Suspension Powered Cradle - Appletree Make
Double Suspension Powered Platform fully complied with EN1808-2015 standard of size (2.5x0.7x1.1)M - Body constructed out of Stainless Steel SS 304 (Main Frame) and structural Aluminium powder coated frames covered with perforated Cladding SS 304 & alumunium chequered platfrom.
Hoister Capacity - 2x Appletree Hoister, each having 800 kg capacity.
Safe work load - 240 Kg as per EN 1808-2015
Suitable for Two numbers of Safety & Two numbers of Suspension wire ropes of size 8.6 mm, 6x19 Galvanized steel with Minimum Breaking Force of 53kN.
Brake fail proof electro magnetic brake provided with breaking torque 15.2 N, Brake voltage 99V DC.
Hoisting Speed- 8~10 m/min.
Safety Lock - Tilt Proof Safety Lock LSF 30A/LSB 3IIType. Stops the platform if it tilts more than 3~8 degree.
Vertical Movement - Electrical
Horizontal Movement -Electical
04 Nos Independent motorised rope realer , centralised control panel , Limit switches for travel , anti tilt device , anti skid flooring , emergency swith at panel , over load limit switch device , and all other accessories for safe and smooth operations.
-
-
-
Aluminium Monorail Track - These are specially extruded Aluminium Monorail Track 150x75x10 mm thick, T-6 Tempered - 6351 grade in mill finish. The aluminum monorail track is supported by monorail brackets which will be mounted either on RCC civil or MS structure (parapet/ceiling) as per project requirement. The profile of monorail track is contoured to suit the traversing trolley on which the cradle is suspended. The cradle will be suspended with the help of ETT that will traverse on the monorail track. The monorail brackets are manufactured out of mild steel which are hot dip galvanized to suit Appletree Aluminium Monorail Track, T-6 Tempered - 6351 grade & are fixed to the face of the RCC Parapet or RCC Ceiling at suitable distance with the help of Appletree SS316 grade anchor/fastener fixed with Hilti/Fischer Chemical or welding.
The RCC/steel structure required for the fixing of monorail brackets is at client’s scope and it should be able to undertake the load of the cleaning system as per design calculation. The fixing of the monorail brackets should be in such a way that it can facilitate levelled layout of monorail track for easy operation.
Access required for installation of monorail system will be at client's scope.
-
-
-
Electric Traversing Trolley (Make Appletree)- The Electric Traversing Trolley is electrically operated & designed to suit Appletree Aluminium Monorail Track. The trolleys will have wheels for holding on to the monorail track. The trolley will have the provision for fixing the galv. steel wire ropes to suspend the cradle. ETT will be contoured over monorail track with its specifically designed profile.
-
-
-
KITCHEN EQUIPMENTS
-
-
-
MILK BOILER
-
-
-
Cap. 75Ltrs
-
-
-
S.S. Sheet insulated body with triple jacket. The water jacket will be fitted with 2 Kw heating element. Milk Outlet, water level indicator & draw off valve at the bottom & water tank. Phillips element, Elcon thermostat, GVC rotary switch, LED indicator for Power, 4mm thickness 3 core wire Rajdoot/Plaza make.
-
-
-
MICROWAVE OVEN
-
-
-
Cap.20-30Ltrs.
-
-
-
IFB-MAKE
-
-
-
PICK UP COUNTER WITH OVERSHELF
-
-
-
Size 1800X600X850+300
-
-
-
Top 3 sides, under & over shelf of s.s.sheet, on m.s.angle & s.s.tubular legs frame work. The counter will have 3 sides fully covered, operator side open. With one under shelf. One over shelf 300mm wide running along the full length of counter u type heating element of 1 Kw is placed under the one head shelf to keep the dishes warm provided with toggle switch also connected with 4 mm 3 core wire.
-
-
-
WORK TABLE FOR SUPPORT OF TWO BURNER RANGE
-
-
-
Size 1350X600X850mm
-
-
-
Top & undershelf of s.s.sheet on m.s.angle frame work & s.s.tubular legs, with adjustable feet. Top to have sound
deadning material lining as required.
-
-
-
TWO BURNER COOKING RANGE
-
-
-
App. Size 1200X600X850mm
-
-
-
Frame work of m.s.angle duly painted, mounted on s.steel tubular legs with adjustable feet. Top & sidfes & under shelf of s.s.sheet. The range will be complete with 2nos. Hy-pressure gas burner with indivizual control valves. Cast iron pan support.
-
-
-
EXHAUST HOOD {Without Ducting, Fixing & Extraction Fan} FOR
TWO BURNER RANGE
-
-
-
Size 1950x750x600mm
-
-
-
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel &
greese collection cup/s.
-
-
-
JUICER (table top model)
-
-
-
Cast Aluminium/CI body, duly polished / painted, with worm &
perforated insert. Top feeding tray. Worm easily cleanable fitted with 1/2HP elect. motor.
-
-
-
CONVEYOR TOASTER
-
-
-
App. Cap. 100-125 Toasts/hr.
-
-
-
S.S.Sheet body, having s.s.sheet conveyor belt. App 225mm wide. The unit will have heating elements on top & lower portion of conveyor belt with variable heat & speed control switch.
(MADE IN ITALY)
-
-
-
WORK TABLE WITH SINK FOR JUICER STATION
-
-
-
Size 1800x750x150
-
-
-
Top & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size
450x45-x250mm
-
-
-
FOUR DOOR REFRIGERATOR
-
-
-
App. Size 1200x675x2000mm
-
-
-
Double walled, insulted 'PUF' body made of 0.8mm thick s.s.sheet. Inside chamber to have 4nos. S.s.wire shalves on adjustable channel. The unit will have 4 doors with magnetic rubber gascuts & locking provision. The condensing unit,
consisting of 'Kirlos'
-
-
-
WORK TABLE
-
-
-
Size 1500x600x850mm
-
-
-
Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound
deadning material lining as required.
-
-
-
EXHAUST HOOD (Without Ducting,Fixing & Extraction fan)
-
-
-
Size 1950x750x600mm
-
-
-
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel &
greese collection cup/s.
-
-
-
WORK TABLE
-
-
-
Size 1650x675x850mm
-
-
-
Top & undershelf of s.s.sheet on m.s.anlge frame work &
s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.
-
-
-
EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for
low height burner
-
-
-
Size 1650x750x600mm
-
-
-
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel &
greese collection cup/s.
-
-
-
LOW HT, TABLE for supporting low height burner
-
-
-
Size 750x750x600mm
-
-
-
Specification same as that of work table but the table will be
without undershelf & will have cross bracing support at lower portion
-
-
-
LOW HT. BURNER
-
-
-
Size 750x750x600mm
-
-
-
Specification same as that of cooking range but the unit will be
without undershelf, but will only have cross bracing support at lower portion
-
-
-
EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for
03 burner cooking range
-
-
-
Size 1650x750x600mm
-
-
-
Made of s.steel sheet, 20G thickly duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel &
greese collection cup/s.
-
-
-
THREE BURNER COOKING RANGE
-
-
-
O/S 1800x600x850
-
-
-
Structure made of m.s. angle of size 38x38x5mm, duly rust proof painted. Top of 165wg thick s.s.sheet. All four side covered up to height of app, 10' by 205wg stainless steel sheet. Bottom stainless steel stripes sheets complete with gas burners valves.
-
-
-
WORK TABLE for support of 03 burner cooking range
-
-
-
Size 1500x600x850mm
-
-
-
Top & undershelf of s.s.sheet on m.s.angle frame work & s.s.tubular legs, with adjustable feet. Top to have sound
deadning material lining as required
-
-
-
EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for
bulk cooker/boiler & fryer
-
-
-
Size 1950x750x600mm
-
-
-
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel &
greese collection cup/s.
-
-
-
BULK COOKER/BOILER TILTING TYPE
-
-
-
Cap.160 Ltrs.
-
-
-
Specification same as Sno. 13 but the frying pan will be of rectangular shaped with 12"depth & a pouring lip & the unit will be fitted with v type high pressure gas burner with the control
valve & pilot lamp.
-
-
-
BULK FRYER TILTING TYPE
-
-
-
Cap.100Ltrs.
-
-
-
Triple jacketed body of stainless steel sheet, Inner most jacketed of 16g thick with 12g thick dish ended bottom, second wall for air gap of 18g stainless steel sheet & outer insulation jacket also of 18g stainless steel sheet. The unit will have counter.
-
-
-
WET GRINDER
-
-
-
Cap. 15Ltrs.(1.0HP)
-
-
-
Stainless steel sheet constd. Body with s.s.sheet constd. Revolving drum, cromium plated pillar support on m.s.angle frame work fitted with electric motor gear box & grinding stones
& coconut scraper.
-
-
-
DOUGH KNEADING MACHINE
-
-
-
(CROMPTON MOTOR 2.0HP)
-
-
-
App. Cap of Bowl 25 Ltrs.
-
-
-
S.S.Mixing bowl, with s.s.rod/strip mixing arm, mounted on steel
tubular & sheet frame work duly painted. Complete with 1.0HP Elect. Motor with the control switch.
-
-
-
POTATO PEELER
-
-
-
Cap.10kg/chrgs (CROMPTON MOTOR 1.0HP)
-
-
-
16 gauge Stainless steel sheet peeling drum, lined inside with Abrasive material, stainless steel/cast iron rotating peeling disc. Top of the drum will have a potato inlet door, waste inlet provision peeled potato discharge door & waste water Outlet
pipe.
-
-
-
PULVeRISER (Std.)
-
-
-
(CROMPTON MOTOR 1.0 HP)
-
-
-
Stainless steel sheet body, 20g thick, the unit will have A top feeding tray & a housing of stainless steel casting with grinding plates & 3 type of meshes for variable type of grinding requirements. The unit will bw fitted with 1.0hp single phase
electric.
-
-
-
WORK TABLE SUPPORT OF PULVERISOR
-
-
-
Size 1500x600x850mm
-
-
-
Top & undershelf of s.s.sheet on m.s.angle frame work &
s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.
-
-
-
WORK TABLE WITH SINK FOR VEGETABLE WASHING
-
-
-
Size 1950x600x850+150
-
-
-
Top & Sink bowl of s.s.angle & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will bw integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm
-
-
-
CHOPPING BOARD FOR MANUAL VEGETABLE CUTTING
-
-
-
Size 1200x600x850mm
-
-
-
Frame work made of s.s.angle top will have P.P./Nylon Board for
chopping 700x700x100mm chopping board
-
-
-
VEGETABLE CUTTING MACHINE
-
-
-
Aluminium casted body with 1/2 hp electric motor safety switch & double feed pusher for round flat & vertical shaped food items etc., the unit will bw Table top model with easy to clean provision. Provided with 4 no cutting discs for slicing grating
Dicing.
-
-
-
CHAPPATI COLLECTION TABLE
-
-
-
Size 1500x600x800
-
-
-
Top Tray of 16G s.s.sheet, tray will have App.100mm ht. collor all around mounted on s.s.tubular legs with adjustable feet & one
s.s.sheet undershelf.
-
-
-
CHAPPATI ROLLING TABLE
-
-
-
Size 2100x750x850mm
-
-
-
Top & undershelf of s.s.sheet on m.s.angle frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required. THREE SIDE CROSS BRACUNG MADE OF S.S. PIPE 1"DIA FOR UNDERNEATH STORAGE.
-
-
-
CHAPPATI PLATE CUM PUFFER
-
-
-
Size 1800x750x850mm
-
-
-
Frame work of m.s.angle, mounted on s.s.tubular legs frame work. All sides pannels & undershelf of s.s.sheet, top plate 10 mm thick mild steel with cast iron puffing grills for puffing of chappaties. Complete with 'V' shape LPG burners with individual
cont
-
-
-
EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for
chapatti plate
-
-
-
Size 1950x750x600mm
-
-
-
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel &
greese collection cup/s.
-
-
-
FOOD TROLLEY WITH 4 ROUND PANS, 1 RICE TRAY & STORAGE
BENEATH
-
-
-
O/S 1350x750x900mm
-
-
-
S.S. Sheet insulated body, Frame work of m.s.angle of size 38x38x5mm mounted on 4 castors (2 with brakes) of size 150mm top to have cutout for 4nos. Round pans for Dal, Subzi, etc., with 1 rice tray & storage below. Three side covered with s.s.sheet
with s.
-
-
-
TRAY CARRIER TROLLEY
-
-
-
Size 1200x600x1200mm
-
-
-
S.S. bottom base shelf mounted at 150mm with all four sides turned down 50mm in 12mm and secured to welded s.s.angle frame work & PROVIDED WITH THREE NOS. OF DETACHABLE TRAYS CUM SHELFS UNIT WILL BE MOUNTED ON 4" PILLAR TYPE CASTORS WHEELS (2 NOS. WITH BRAKE & 2 NOS. WITHOUT
BRAKE)
-
-
-
TRAY SET UP COUNTER WITH BAIN MARIE & DOUBLE OVERSHELVES
-
-
-
Size 1800x600x850+375+225
-
-
-
Top of 16G s.s.sheet, Bain Marie water tank of 18G s.s.sheet, fitted with 3.0kw heating element with automatic temperature controller. Water outlet provision with drain valve, 3 sides covered with 20G s.s.sheet, Top to accommodate s.s.sheet Food Pans with GN pan 1x2x4" depth with lid 5 sets
-
-
-
STORAGE CABINET
-
-
-
Size 1200x600x850mm
-
-
-
Top of 165wg S.S.Sheet on one over shelf, three sides of 20SWG s.s.sheet. Dish storage cabinet with 2 shelves and sliding door
will be provided on service side.
-
-
-
STORAGE RACK
-
-
-
Size 900x450x1800
-
-
-
Vertical of 32 mm dia stainless steel pipe with adjustable feet 4
no of 18 S.S.Sheet at equaly distance.
-
-
-
INGREDIENT BINS
-
-
-
Size 600x600x600mm
-
-
-
DUNNAGE RACK
-
-
-
Size 1200x600x500mm
-
-
-
Made of s.s.square pipes of size 32x32mm, with support of
25mm square s.s.pipe
-
-
-
POT RACK-3 TIER
-
-
-
Size 1200x600x1500mm
-
-
-
Verticals of 32mmx32mm square s.s.pipe, 3 shelves welded with vertical frame of 19mm dia s.s.pipe shelves with equal space
between two tubes mounted on adjustable feet.
-
-
-
SOILED DISH LANDING TABLE WITH GARBAGE CHUTE
-
-
-
Size 2100x600x850mm
-
-
-
Top of 16G s.s.sheet with 'Sunkun' top. A garbage chute provided on top with a space below to keep dust bin (Not part of equipment). The top will be mounted on m.s.angle, rust proof painted & s.s.vertical tubular legs with cross bracing support on
3 sides.
-
-
-
THREE SINK UNIT
-
-
-
Size 1800x600x850+150mm
-
-
-
Top & 3 sink bowls of 16G s.s.sheet. Duly welded, grinded & polished smooth mounted on m.s.angle & s.s.tubular frame work with 150mm back splash. Each Sink Bowl Size 500x500x300mm
(without sanitory fitness)
-
-
-
CLEAN DISH TABLE
-
-
-
Size 2100x600x850mm
-
-
-
Specification same as that of work table but with 2 undershelves
-
-
-
CLEAN DISH RACK
-
-
-
Size 900x450x1800mm
-
-
-
Vertical of 32 mm dia stainless steel pipe with adjustable feet 5 no vertical at equal distance 1st shelf fixed at 150mm from floor
level.
-
-
-
L.P.G GAS PIPE LINE (150 RUNNING FEET APPROX)
-
-
-
ACTUAL MESUREMENT WILL BE ACCORDING TO As per site
conditions
-
-
-
CENTRIFUGAL EXHAUST BLOWER
-
-
-
20000CFM
-
-
-
S.S.GRATING for kitchen drainage trough
-
-
-
(APPROX 25 RUNNING FEET)
-
-
-
ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site
conditions
-
-
-
EXHAUST HOOD DUCTING (APPROX 1200 SQUARE FEET)
-
-
-
ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site
conditions.
-
-
-
LAUNDRY
-
-
-
Industrial Drying Tumbler.
-
-
-
Front Loading Open Pocket, Reversible, Steam Heated 60 KG Capacity, Automatic Cool Down Feature.60 kg Capacity, Steam Heated.
-
-
-
Flat Bed Press.
-
-
-
Pneumatic, Automatic, Steam heated. Automatic digital timed. Powerful moisture suction blower. Pneumatic raising & lowering of spring suspended & Teflon lined Head. Adjustable ironing pressure. Head Size : 1500 x 750
-
-
-
Flat Work Drying Ironer.
-
-
-
1 Roll. Heated Chest Type, Front Feed, Rear Return,Steam Heated,
-
-
-
Washroom Trolley.
-
-
-
S.S. 100 kg capacity , Overall Size : 1250 x 675 x 780 ht.
-
-
-
Dry Linen Trolley.
-
-
-
S.S. 50 kg capacity , Overall Size : 1100 x 600 x 1500 ht.
-
-
-
Shelf Trolley.
-
-
-
S.S. 100 kg capacity Overall Size : 1200 x 600 x 1700 ht.
-
-
-
Mobile Table.
-
-
-
S.S. Top Size : 1150 x 750
-
-
-
Laundry Scrub Station with 2 Sinks.
-
-
-
All S.S. Size: 1600 x 550 x 900 height.
-
-
-
Vacuum Finishing Table.
-
-
-
Table Size : 1200 x 750, Electric Steam Iron, Teflon shoe, aluminium armoured & Spring loaded Condensate separator.
-
-
-
Industrial Washer Extractor.
-
-
-
30 kg Capacity High Spin, Suspended.Computer Controlled, steam heated.
-
-
-
Industrial Washer Extractor.
-
-
-
60 kg Capacity High Spin, Suspended. Computer Controlled, steam heated.
-
-
-
Mobile Table.
-
-
-
S.S.Top Size : 2350 x 750
-
-
-
Air Compressor, 3 HP Double Stage, 160 ltrs Tank
-
-
-
Steam Boiler, 200 kg Capacity with Water Softener
-
-
-
CSSD EQUIPMENT
-
-
-
SITC washing bench with double sink complete etc as required and as per technical specification attached. and as per
technical specification attached.
-
-
-
SITC Ultrasonic bench type - Semi automatic (28 lItres) complete etc as required and as per technical specification
attached.
-
-
-
SITC Trolley for material transport with 2 shelfs complete etc
as required and as per technical specification attached.
-
-
-
SITC Working table complete etc as required and as per
technical specification attached.
-
-
-
SITC Pass box for material complete etc as required and as per
technical specification attached.
-
-
-
SITC Washer Disinfector pass through double door 250 - 300 ltrs with 10 DIN Stainless Steel trays 480x254x50h mm + External Trolley (2.Nos) complete etc as required and as per
technical specification attached.
-
-
-
SITC Air/Water gun with set of nozzles & accessories complete etc as required and as per technical specification attached.
-
-
-
SITC Manual Trolley Washing Gun complete etc as required
and as per technical specification attached.
-
-
-
Clean Area (zone 2)
-
-
-
SITC Control & Packing table complete etc as required and as
per technical specification attached.
-
-
-
SITC Trolley for material transport with 3 shelfs complete etc
as required and as per technical specification attached.
-
-
-
SITC SS Wire storage self unit ,single complete etc as required
and as per technical specification attached.
-
-
-
SITC Working table complete etc as required and as per
technical specification attached.
-
-
-
SITC Roll holder with cutting knife complete etc as required
and as per technical specification attached.
-
-
-
SITC Heat Sealing machine complete etc as required and as per
technical specification attached.
-
-
-
SITC Stool for operators complete etc as required and as per
technical specification attached.
-
-
-
SITC Trolley for basket transport complete etc as required and
as per technical specification attached.
-
-
-
SITC Paper holding trolley (4 rods ) complete etc as required
and as per technical specification attached.
-
-
-
SITC Linen Inspection table complete etc as required and as
per technical specification attached.
-
-
-
SITC Documentation Labeller complete etc as required and as
per technical specification attached.
-
-
-
SITC Autoclave steam with pass through double door (500 - 600 litrs 8 stu) with Internal Trolley & SS baskets with External Trolley (4.Nos) complete etc as required and as per
technical specification attached.
-
-
-
Sterilizer should be suitable for sterilization of medical devices like flexible endoscopes, rigid endoscopes- both single channel and also dual channel and non-lumen, metal, non-metal heat & moisture sensitive instruments, like deify paddles etc. Should provide simple and fast sterilization of medical devices at low temperature using Hydrogen Peroxide sterilization gas/plasma technology without any need to have additional Dryer. Sterilizer must be having US-FDA/European conformity. Usable Rectangular chamber having volume of minimum130 ltrs effective usable volume. Should have removable shelf for keeping big load with double microprocessor controlled vertical sliding door. Should have screen size of 5.5" min or more colour TFT/LCD, touch screen. Should have integrated thermal printer, with 32 characters support. Sterilization temperature should not be more than 50 deg C ± 5 deg C. Should be of aluminum chamber and door. Should have three selectable pre-programmed sterilization cycles for different types/ quantity of lumen and non-lumen loads with max. Sterilization time not more than 55 min. ± 5 min.
-
-
-
SITC Trolley for material transport with 2 shelfs complete etc
as required and as per technical specification attached.
-
-
-
SITC Linen Storage Trolley complete etc as required and as per
technical specification attached.
-
-
-
SITC SS contol Closed Trolley complete etc as required and as
per technical specification attached.
-
-
-
SITC SS Wire storage self unit, single complete etc as required
and as per technical specification attached.
-
-
-
SITC SS Free standing Basket racks complete etc as required
and as per technical specification attached.
-
-
-
MINOR MODULAR OPERATION THEATRE
-
-
-
Antibacterial / Antifungal Paint
-
-
-
Supply & laying of water based aseptic & self sterilizing wall coating with Anti fungal & Anti Bacterial Paint and other related painting components (viz: Primer, Putti etc.) of approved make and shadesso as to present a joint less finish etc. as per tech. specs.
attached.
-
-
-
Conductive Seamless Flooring with Coving
on all Corners
-
-
-
Supplying and laying of 2mm thick washable anti static seamless flooring with perfectly curved flash coving, resistant to mechanical stresses & dynamic loads & having ESD / EMI (conductive) protection characteristics. (Approx.), Coved Corners of approved make & shade. The joints of PVC tiles should be welded by special PVC thermal welding units using PVC welding bars colours. It should be scratch proof. The PVC flooring should be inert to body fluids, chemicals and disinfectants and should not be affected by temperature variation in the OT. The floor should efficiently discharge electric charges up to 2 kV. The conductive copper grid laid underneath the PVC sheet should be supported by liquid epoxy compounds allowed to set as a uniform and level surface
& as per technical specs attached.
-
-
-
Hermetically Sealed Manual Sliding Door System
-
-
-
Fabrication, Supply, installation, testing & commissioning of sliding type Hermetically Sealed OT door having high density particle board cores, high pressure laminate face on both sides, viewing window 300 x 300mm. Size: 1500 x 2100 mm (W x H).
-
-
-
Door (1500 mm x 2100 mm)
-
-
-
Peripheral Lights (Dimmable)
-
-
-
Supply, installation, testing & commissioning of Recess Mounted IP54 LED clean room protocol, non–hygroscopic peripheral lights having CRCA housing lumen pack of 5600Lm with system wattage of 60 watt. The fitting should be Bottom opening type with high reflected clear acrylic glass with dimmer control from the Surgeon Control Panel. Specially designed for Clean Room Applications, such as
Modular OT & as per tech. specs attached.
-
-
-
Anaesthesia Pendant
-
-
-
Providing & fixing of single arm (900mm) anaesthesia pendant with load carrying capacity of 80Kg and rotational values of 330-340 degree with adjustable stopper. The pendent should be designed with service head to host, base, gas module, electric modular and shelves upto 8 gas outlets & 10 Electrical switches. Racks & Shelves should be provided to mount the equipments like monitor etc. The surgeon pendent should have two arms as per technical specs
attached.
-
-
-
MGPS Piping Work with in the theatre
-
-
-
Scrub Sink (One Bay)
-
-
-
SITC OF 1‐ Bay Scrub Sink, with Infrared
Photo sensor, Digital Timer with user defined
Time interval 1 & 3 minutes,1 no. mixture valve and 1 nos. solenoid valves along with Manual Option Foot Operated mechanism/ Foot switch. Anti‐splash metal body construction made of Stainless Steel Grade 304 polished finished.
The Scrub Sink is provided with front access panel for ease of maintenance and repairs. 1
– Position size 800 mm long
-
-
-
Strorage Unit
-
-
-
Supply & instalaltion of Storage Unit size 1666 x 865 x350mm having two shelves, made 1.5 mm thick EGP with 120 microns. With Antifungal and Antibacterial surface coating. Having 5 mm thick acrylic sheet & mounted flush with the theater wall.
-
-
-
ART WORK
-
-
-
Metal Sculpture permanent in nature. Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions, display of actual size dummy /mock up
-
-
-
Fabricated in sun board with digital print for client approval
Artwork Execution
Execution of approved design in SS 316 grade steel /SS 304 grade SS (1.5 mm-2 mm thick) /STONE/ALLUMINUM /MIXED MEDIA METAL pu colored (IF REQUIRED)antique as per approved finish (mrf/akzo nobel) and protected against discoloration by sealing it with top coat of Mrf/Akzo nobel clear Pu. Proper support system will be given as per approved shop drawing, to withstand high wind pressure. The sculpture will be free from any Undulation /Dent unless it is part of the design.
The cost is inclusive of transport/packing and installation of the same at site. Fastener/screws hilti or equivalent company.
The rate shall be inclusive of all material, labor, machinery, tools, tackles, and scaffolding etc for all heights, all levels.
LX BXH =CU.MTR
-
-
-
Hand painting directly on wall Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions, display of actual size dummy /mock up Fabricated in sun board with digital print for client approval.
ARWORK EXECUTION
Towards the cost doing hand painting using artist quality colors by qualified artists and protected by pu coating (mrf/akzonobel) all under the watchful eyes of expert artist
-
-
-
FIBERGLASS SCULPTURE .Concept Creation
-
-
-
Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions ,Display of actual size dummy /mock up Fabricated in sun board with digital print for client approval Artwork Execution
Scope of work includes clay modeling/dye /fiberglass casting and protective pu coating and installation at site .
-
-
-
FIBERGLASS mural Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions ,Display of actual size dummy /mock up Fabricated in sun board with digital print for client approval Artwork execution
Towards the cost of making fiberglass mural including clay modeling/dye fiber glass casting, hand painting and protective pu coating(akzo nobel/sirca) all under the watchful eyes of expert artist
-
-
-
Mixed media mural
Wood/metal/fiberglass/terracotta /tiles or anything other medium artist find suitable as long as it is permanent in nature.
Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for
-
-
-
approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions ,Display of actual size dummy /mock up Fabricated in sun board with digital print for client approval.
Artwork execution
Towards the cost of making 3D relief mural in approved medium(Wood/metal/fiberglass/terracotta /tiles or anything other medium artist find suitable as long as it is permanent in nature.) and protective pu coating(akzo nobel/sirca) all under the watchful eyes of expert artist.
-
-
-
Canvas paintings (oil /acrylic medium) Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions, display of actual size dummy /mock up Fabricated in sun board with digital print for client approval ART WORK EXECUTION
Towards the cost of doing canvas PAINTING by qualified artist including frame and installation at site
-
-
-
CURTAIN & IV HANGER SYSTEM
-
-
-
Providing and installation of Cubical tracks system made of Powder coated Aluminium alloy, mounted on the ceiling using Suspension hangers and bushes, powder coated wall bracket and Track Joiners wherever required. This system shall be complete with stain free polyster fabric, Water repellent Curtains having 18" Net on top. The curtain shall be approx 7X4 feet, with two curtains stiched together wherever required. Curtains shall also be provided with smooth movement, non sticking runners, with Stainless steel hooks, for easy movement. The system shall have curtain removal points and end cap complete as per technical specifications wherever is required.
-
-
-
Providing and installation of I.V. Hanger with 5 hooks, made from mirror finish stainless steel, 304 grade with adjustable height, provided with 4/6 feet aluminium alloy track powder coated with endcap of tracks, 1 pc of trolley for smooth IV Hanger movement on track, 2 pcs of suspension hanger powder coated, top & bottom bush, powder coated, for easy fitting and better aesthetics complete as per technical specifications is required.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%