Jharkhand Education Project Council Tender

Providing 12mm. cement plaster(1:3) with olean coqrse sen af PM 1.5 with floating coat of neat cemet in skining inçluding aoenoing of junctions with floor, curing, taxes and royalty all camplate as per building specification and direction of E

Providing 12mm thk. Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm thk. Cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water,scaffolding, taxes and royalty all complete as per builing specification and direction of E/I.

Providing 50m thick cement concrete flooring (1:2:4) with 20mm to 6mm. size graded stone chips flinished with foring coat of neat cement in panels inctuding cost of curing finishing the surface smooth by rubbing with carborandum stone, taxes anid royalily with all complete as per building specification and diretion of E/I

Extra for cleaning the old surface by scraping the entire old white wash or color wash including cost of scaffolding all complete as per bulding specification and direction of E/I

Providing two coats of Snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper,applying putty where ever required,scafffolding,washing of floors & taxes all complete as per building specification and direction of E/I

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied@1.67ltr/10sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or find sand paper, applying putty wherever required

Taking out chaukhats in door including staking searvisable matarial within 15m lead and disposal of unservisable material with all lead as per direction of E/I

Taking out chaukhats in windows includings taking searvisable matarial within 15m lead and disposal of unservisable material with all lead as per direction of E/I

Taking down old door & window shutters including staking searvisable matarial within 15m lead and disposal of unservisable material with all lead as per direction of E/I

Supplying,fitting and fixing M.S. grill gate with M.S. grills made of 20xGmm M S. flats or 16mm. M.S. square bars fitted on25x25x 6mm. M.S. Angle frame -do- (when steel is not supplied by the deptt.).

Labour for scrapping old paint with paint remover and below lamp as required on wooden or steel surface including cost of all labour and materials end scaffolding all complete as per bulding specification and direction of E/l

Providing one coat of synthetic enemel paint of approved shade and makeover old wooden surface including cleaning the surface after removing dirt,

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning.removing dust,dirt,scales smokes and grease and cleaning the surface thoroughly including cost of scatfolding and taxes all comiplete as per building specification and direction ot E/l.

Waterproofing for Old and New Roof Stab Providing and laying water roofing treatment on roaf slab by applying two Componenae eegredready ta use, acrylic tmoditted Waxible materigl applied win 512.1 Sroler or spray tor water proofing.coating es per menur fácurer MAR SCHED SRedficathahs with followirig stepe surface pteparalionProdiig and cieaniog of concrete sutace emovedust, ol grease pcluding removal of existihg loasé pant ating, and cement taltancaby clethng wits compraseed air & waterjetst ding almatertals, tabour, toolsotmplete.Ponding leet to be donea ANN pluooir9.al cutets andtee checkedtron.softiderity seepageaoe On dentifcaipn oreepape, ce men grogto ba döne with on shrink expandmg admixtaureof sike tnaia PvLtd, FMYK Schomberg DFiRUFosToeor equivalent Providing-and reparing of ecorners and joiots suchas those between the paraper walt and the roof siab ete sha be chemfered wa 50mm 150 mm fillet of martar (Cement: and 4admxewih acrylic polymer of SikalFosroe/MYK Schomberg/Dr Ft of eguivalent. Before chamfering a prime èeoat shall be given witn the slurry of aCyic polymer. Repalring surface iregutarites, damaged concretainbase slab dead cracks if any, with an acrylic polymer modifiedirepair.mortar tncluding a coat of bonding agent of the same with cement slufry including all material, Jabour, tools complete. (6)1st Coat-Apply 1st use, coat of two component acrylic modifiad, reedy to fexibte cemenitious matérlal on surface saturated dry roof and inside walloParapet wall upto 600 mm by brush or roler After 1st of coat application, 45 gsm of Fibre glass cloth to lay when the stH green. first tayer is 1st.coat should be applied @1.50 kg/Sqmt/coat. For purpose the of measurement the entre (c) 2nd Coat-To treated.surface will be measured apply the 2nd coat of two ready component acrylic modified, to use, flexible cementtious material right over the angle to the st coat glass fibre laid surace. 2nd coat shoud be Sqmt/coat. For the appled@0.7 kg! purpose of measurement the wll be measured. entire reated surface After three days ofdrying the 2nd coat water outlets to be , the rain plugged and identify ponding test to be done for 48 hours to seepage, leakage from soffit and if found necessary rectfication to be done as per salisfaction of Elc. protected from damage before screed over it. Water Sika Topseal 109hl Fosroc Brushbond proofing Brand: RFX Dr Fixtt Pidiffin 2K/MYK The waterproof coating to be Product Performance- Chemical Base Part A: Aquafin TGG Acrylic copolymer, Part B: Specially graded cemenitious Density 1.6 kgA (mixed density) at +27°C powder 2 NVmm2 after 28 days (with Fibre cloth) (According to ASTMD Pullout Bond Strength 2370) -2 Nmm2 (concrete failure) (Accord

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 TypeA,including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.

110 mm diameter

Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1cement:2coarse sand:4 graded stone aggregate of 20 mm nominal size)over P.V.C.sheet 1mx1mx400micron,finished with 12mm cement plaster 1:3(1cement:3coarse sand)and a coat of neat cement,rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 TypeA, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.

Single pushfit Coupler

110 mm

Single tee with door

110x110x110 mm

Bend 87.5°

110 mm bend

Shoe (Plain)

110 mm Shoe

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixed a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.

580 mm. long

With 12.5 lit. low level PVC. Cistem

Supplying, fitting and fixing 40mm high vitreous white glazed ware E.W.C. with "p" trap of parry/hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make and complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle cock of approved qualty weight not less than 450 grams 15mm P.V.C.alkathene pipe 45cm. long with brass coupling at both end sand White/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screw etc.painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I.

With s trap

12.5 lit. low level C.I. cistern

Supplying fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of Hindustan "Parry" or any other approved ISS make with 5 liters capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fittings clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grams 15 mm P.V.C /Alkthene pipe 450 mm long with bras coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor, making good the same etc all complete as per specification and direction of E/I .

Flat back or standing corner (600x350)

Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Supplying, fitting and fixing H.C.I. pipes with ear of approved make conforming to I.S.I. 1729 including supplying nails and bobins short pieces, cutting loose collars, lead and yarn for making lead caulked joints, cutting pipes to size including earth woek or scaffolding where necessary etc. all complete as per specification and direction of E/I.

100mm dia

75mm dia

Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobines lead and yarn from making lead caulked joints including earthwork or providing scaffolding as the case may be all complete as per specification and direction of E/I.

H.C.I. Heal Rest bend

100 mm dia (wt. 5.5 kg. app)

80 mm dia (wt. 4 kg. app)

H.C.I. double junction with door and ear

100 mm dia (wt. 15.5 kg. app)

Floor trap with grating

100mm dia

Norton patent H.C.I. Cowel

100mm dia (wt. 3.25 Kg appx.)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

15 mm nominal dia pipes

20 mm nominal dia pipes

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :

100 mm diameter S.W. pipe

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

15 mm nominal bore

20 mm nominal bore

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

100x100 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Point Wiring in PVC Conduit, with Modular type Switch:-

Wiring for light point/fanpoint/exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductors in glecorecable in surface/recessed PVC conduit,with modular types witch,modular plate,suitable size of GI box etc as required.

Group C

S/F Modular type electronic fan regulator :-

Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F Ceiling Rose :-

Supply, fitting, fixing and testing of 1200mm Sweep, double ball-bearing, 2 canopy ceiling fan including connection with 1.5 sq mm copper wire, down rod all accessories as required.

15/16 Watt LED Bulb

Copper earth pipe electrode :-

Cost of drilling 200mm x 165mm x 125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic DTH Rigmachine ,all complete including supplying all materials, tools ,drilling rig,Air compressor and equipments ,as well as fuel,lubricants and cost of transportation of Rig machine and other vehicles up to the site. (I) From 0-50 meter

(II) From 51-125 meter

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Supplying,tools tackels & lowering of 200mm dia MS Erw Casing Pipe Of 6mm wall thickness including welding charges , cost of Pipe etc including all taxes, vat, Excise duty,freight charges with inspection charges etc as applicable,etc all complete job

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete,for all depths, as per direction of engineer -in-charge :

100 mm nominal size dia

150 mm nominal size dia

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete : 150 mm clamp

150 mm nominal size dia

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying all materia. Labours,tools & equipments for fitting & fixing 200 mm dia MS cap over casing Pipe Complete job.

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore :

Horizontal

Vertical

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

submersible pump set 100mm dia (with polypropylene/nory impeller) up to 20 stage. 5 HP

Supplying XLPE /PVC insulated,armoured cable 1100 v grade with ISI mark Three and half core standerd aluminium conductor with 6 mm thick 25mm width M.S spacer with G.I earth wire 6 mm thick 25mm width with G.I earth with 6 sq mm , complete in an approved manner. 3.5 core 25 sq mm

STARTER

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite stone slab colour black, Cherry/Ruby red

Carriage of materials

Local Sand

Sand

Chips

Steel

Bricks

Non Schedule Items Providing and fixing Coat Hook of approved quality.

Supplying,Storing,handling,shifting,installation,testing and commissioning of CP flxible hose, spary wall flange etc.complete (1) Kerovit make (model-KA580002).(2) Hindware make model-F1600002)Rs.=1570.(3) Parryware Make (Model-T9941A1) Rs.=1600

Supplying and fixing single wall mounted 18/22 watt LED type batten fitting complete with electronic driver and LED tube etc directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required.

Supplying and fixing batten/ angle holder includingconnection etc. as required.

BaLA painting

Add 18 % GST

Add 1% Labour Cess