Public Works Department Tender

12mm thick cement sand plaster in 1:4 mix (1 cement: 4 coarse sand). all inclusive leads, lifts, loading, un-loading, cost and carriage of all materials from approved nearest sources to site of work complete.incl cost of scaffolding.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Providing and fixing of glass panes 4mm thick for window shutters, with .5" ornamental kail wood beading bedded in putty and fixed with nails, and matching with window colour.Complete Job

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete.50 mm thick with 20mm nominal size stone aggregate.

Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete.

P/F of PPR Fitting including ELBOWS,TEES,UNION,ETC all incl Fixtures and all costs and carriages involved complete Job(25MM /20MM)

P/F of PVC pipes of approved make (prince , supreme etc) with all fittings and fixtures complete.(B type)

100 mm dia pipes

75 mm dia pipes

100 mm floor trap

50mmm pipe

75mm collar

100x75mm Reducer

P/F of CP fittings of approved brands and manufacture complete cera,Hindware

Bib cock of approved make

Angle value approved make

Wall mixer/Basin Mixer approved make

P/F CP Connections (Long)

P/F of water closet squating pan (Indian type with 10 ltr pvc flushing cistern) with all fitting and fixtures incl P or S traps(Hindware)including cistern all complete job

towel rods/soap case

Mirror ( 2 x 3-0" )

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Extra for Providing edge moulding to 18 mm thick Granite stone counters, Steps etc. complete as per design approved by Engineer-in-Charge.

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Proving and fixing 35mm thk First class (k.D) wood wire gauze shutters using galvaned M.S wire gauze of av. Width for aperture 1.4mm with wire of dia.0.63mm for windows & clerestory windows including ISI marked bright finished butt hinges with necessary screws and required size of beading etc complete.

Providing and laying of dry stone soling in foundation trenches tightly hand packed with hand ramming, watering incl.costs and carriage of materials from source to site of work complete.

Providing & Laying In Position Cement Concrete of Specified Grade Including Curing But Excluding The Cost Of Centering And Shuttering. All Work Upto Plinth Level With: 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) all carriages

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).