Public Works Department Tender

Providing and laying in position of reinforced cement concrete 1:1.5:3 (1 Cement, 1.5 Corase sand: 3 grade stone aggr 20mm nominal size crushed including curing but excluding the cost of cantering, shuttering, finishing and reinforcement all work upto plinth level including all carriages involved complete

Providing and laying in position cement concrete in 1:2:4 (1 Cement: 2 Corase sand: 4 grade stone aggr 20 mm nominal size crushed) including curing but excluding the cost of centring and shuttering. All work upto and above plinth level including all carriages complete

Centering and shuttring including strutting, propping and removal of form work for wall (any thickness ) including attached pilasters, buttresses , plinth and string courses etc

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe 500D or more. Inculding all carriages complete

Brick work with common burnt clay bricks of class designation 7.5 in Super structure above plinth level upto floor V level in Cement mortar 1:6 ( 1 cement : 6 coarse sand) Including all carriages involved complete

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, butt hindges , Ldrops, handles, Tbolts (Hollow Sections) including all carriages complete

Providing Hi- Rib colour coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick

15mm cement plaster 1:4 (1 Cement: 4 Fine Sand) including all carriages complete

Providing and laying Nallah Boulders handpacked of specified grade and size i/c ramming , spreading and compacting with power and road roller 8-10 tonee capacity and all carriages and loading /unloading complete.

DEVRI PILLAR GATE

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil.

Providing and laying stone soling duly hand packed in maintaining level and section including all carriages complete

Providing and laying in position cement concrete in 1:4:8 (1 Cement: 3 Corase sand: grade stone aggr 40 mm nominal size crushed) including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete

Providing and laying in position cement concrete in 1:3:6 (1 Cement: 4 Corase sand: 8 grade stone aggr 20 mm nominal size crushed) including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete

Centering and shuttring including strutting, propping and removal of form work for walls (any thickness) iluding atached pilasters , buttresses, plinth and string courses etc.

Providing and laying in position of reinforced cement concrete 1:1.5:3 (1 Cement, 1.5 Corase sand: 3 grade stone aggr 20mm nominal size crushed including curing but excluding the cost of cantering, shuttering, finishing and reinforcement all work upto plinth level including all carriages involved complete

Reinforced cement concrete work 1:1.5:3 (1 Cement, 1.5 Corase sand: 3 grade stone aggr 20mm nominal size crushed) suspended floors, etc. upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement including all carriages involved complete

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe 500D or more. Inculding all carriages complete

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, butt hindges , Ldrops, handles, Tbolts (Hollow Sections) including all carriages complete

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing one face dressed fine chisel dressed

extra for fine chisel dressed devri stone in square or rectangular pillars

P/l of devri stone fine chiselled ornamental cornice 100mm in 1:6 mix including pointing in 1:2 mix and also moulding of the edges as per the approved desing and pattern including cost and all carriages upto the site

Removing of accumulated malba/ concrete blocks by way of engagement of JCB and hydraulic concrete breaker including disposal by MT as directed at site complete job(STA).

Painting with synthetic enamel paint of approved brand and manufacture to give an ever shade or more coats on new work

clearing grass and removal of the rubbish upto a distance of 50m outside the periphery of the area

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage