Public Health Engineering Department Tender

Dismantling of old defunct HC Pump set of Capacity 8000 GPH x 102 mtrs head. The Job involves dismantling of old HC Pump from foundation, dismantling the base frame and dismantling of old foundation block with the help of requisite tools, tackles, skilled and unskilled labour. Providing, installation, testing and commissioning of HC pumping unit of capacity 10000 GPH x 102 mtrs head at T/well cum P/S Mishriwala Migrant Camp. The pumping unit including connected accessories provided shall be of reputed make confirming to BIS accompanied with curve chart. The job includes carriage and labour charges for loading/unloading, shifting and proper stacking of 10000 GPH x 102 mtrs head HC pump set, base frame and connected material, tools tackles etc. mechanically/manually at working site so that sufficient work place is available. Excavation of floor of pump room for laying of new foundation block after dismantling of existing damaged the floor upto a depth of 1 mtrs & length and breadth as per the specification of base plate, for laying of new foundation block. Disposal of excavated material within the premises to a safer place. Providing and laying of reinforced cement concrete block in mixture of 1:1.5:3 ratio of dimensions suitable to base frame size, by way of laying of tor steel mesh of 10 mm dia tor steel bar at a spacing of 15 cu/cm. The works includes curing and form work. The space around the block to be filled with coarse sand in layers with proper compaction to absorb the vibrations. Fabrication and fitting in position of foundation bolts made out of M.S round bars 20 mm dia of length 800 mm with a suitable threaded portion to accommodate the base frame and double nuts and washers. Aligning of base frame horizontal and vertically levelled and aligned precisely during the laying of foundation block so as to ensure accuracy in the alignment of the pumping unit. Complete job includes cost and carriage of sand, bajri, stone/pebbles, cement, tor steel etc. and their carriage to site for Installation of pumping unit on the base frame and fastening as per the provisions of the base frame with the help of nuts and bolts after proper leveling and aligning by p/f of shims/packing to motor/pump to achieve alignment within permissible limits. The pump and motor are to be aligned precisely and to be checked for the same with the help of suitable instruments etc. Connection of suction and delivery ends of the pump-set with the already laid suction and delivery pipes. Any other miscellaneous material for execution of job shall also be provided by the firm. Making all electrical connections of Pump-set with panel by proper thimbling and crimpling all cable ends and then testing and checking for specified amperage on full load. Each and every work on the above mentioned job shall be of high workman ship and properly thimbled, taped where required as per site requirements. Testing and commissioning of the system. Complete job includes material cost labour, carriage and hire charges of tools and tackles, Unforeseen Charges, material at site.