Municipal Corporation Tender

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kind of soil 1 meter from cutting edge

Removal of Excavated mulba dismantled unserviceable material from the site of work by mechanical transport or manual means or animal means including loading and unloading complete job .

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for : Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls

Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platforms.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design and pattern.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. 100x100x16 mm

Engagement of labour for clearance of site (Complete Job).

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Providing Lsection design drawing of the structure from the struture Engineer.

Providing Weep Holes 75 mm Dia.

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar.

Dumping Stone excluding cost of stones. in Horizontal on level and on Slopes (Behind pitching)

Providing and fixing bolts including nuts and washers complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth.

Provide & fixing of Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. but without charcoal/coke and salt as required

Providing and fixing 6 SWG dia G.I.wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring /cable as required.

Supply & Fixing of 32mm dia medium class PVC conduit anlog with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, Installation, Testing & Commissioning of 5 mtr height Decorative pole made of galavnised mild steel pipe duly polyurethane (PU) paint coated with 1 mtr. long single arm designer bracket is made of round tube conforming to IS 1161. The pole(OD of 114.3mm and thickness-3.6mm) with bracket is given pre-treatment and finished with PU paint giving it a pleasing appearance and antique finish. Pole shall be available to hot dip galvanize the tube before painting. Foundation bolt size shall be 20x600x4nos. with Base plate size 300x300x12mm. A door is provided with Electrical accessories (connector, bakelite sheet and 6 Amp single pole MCB, cable looping termional for 4x4/6sqmm aluminium cable). Aluminium casting in golden ring form at bottom, middle, top of the pole. The pole will be supplied with brackets and luminaire combinations to suit the requirement. Branding name shall be embossed at the bottom near Junction/MCB box. Sticker not allowed in the form of company branding. Pole shall be supplied with outdoor post top luminaire of 60 Watt IP67 mounted in suspension type having an approximate size of 460mm outer diameter and 635mm height, housing - aluminium with designer steel aesthetic crown, optical grade opal injection moulded/clear polycarbonate diffuser and graphite grey UV resistant colour ,constant current electronic, driver provided with high voltage ,open & short circuit protection and ambient temperature -10C to +40C. Supply 150V- 240V power factor 0.95 ,THD ≤ 20% internal surge protection of 4KV with following specification of light Engine for 60W : 4800Lumens, CCT 3000K ±500 CCT ,CRI 70 and lumen maintenance of L70 at 50000 hours IP 65 connectors,Accessories etc Complete with all repects

Supplying, Installation, Testing & Commissioning 3Cx 1.5 sqmm Cu. conductor XLPE Flexible insulated PVC Tape inner sheathed for multi core cables , unarmoured as per IS,PVC type ST to sheathed 650/1100V grade as per IS 7098 (part 1)1988

Supplying, Installation, Testing & Commissioning 4Cx 4 sqmm 1.1KV cable Al. conductor XLPE insulated PVC Tape inner sheathed for multi core cables , Armoured as per IS,PVC type ST to sheathed 650/1100V grade as per IS 7098 (part 1)1988

Supplying, Installation, Testing & Commissioning 4Cx 6 sqmm 1.1KV cable Al. conductor XLPE insulated PVC Tape inner sheathed for multi core cables , Armoured as per IS,PVC type ST to sheathed 650/1100V grade as per IS 7098 (part 1)1989

Supply, Installation, Testing & Commissioning of feeder pillar panel (outdoor type) made up of 2mm thick sheet steel, compartmentalized complete with incomer MCCB (As per load )10 KA - FP, Aluminium bus bar of the required rating, specifications, contactor and timer of suitable rating of reputed make complete with MCB's-SP-(5 to 32) Amp as required (C curve) including cement concrete foundation/platform for the panel as required.

Supply, Installation, Testing & Commissioning of 11/0.433kV, 3-phase Pole mounted Distribution Transformer 16kVA with two pole structure inclusive LT panel of suitable capacity with incomer and required outgoing, trivector three phase energy meter other required allied works to complete the job.

Carriage of materials by all means including loading/ unloading and stacking complete. Sand

Carriage of materials by all means including loading/ unloading and stacking complete Stone aggregate below 40mm Nominal size .