Military Engineer Services Tender

Dismantling Stay assembly complete all as directed.

Dismantling Earth wire or copper conductor,service feeder or distributor span complete all as directed.

Dismantling of ACSR conductors complete all as directed.

Taking down street light fittings including GI bracket complete all as directed.

Steel tubular swaged pole complete with base plate welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-31 (9.0m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with white and black paint alternately on external surface above PCC benching including numbering with black paint and painting with bituminous paint internally complete and externally for portion embedded in PCC, complete all as specified and directed. Note :- PCC, earth work shall be measured & paid separately under respective items.

Loop in/loop out cable, juntion/terminal box for cable connection made out with thermoplastic of size 200mm x 160mm x 98mm along with 200 Amp rated bus bar and MCB SPN 6 Amps 230 Volts with provn of external fastening with metric knockouts for cable entry & outgoing for service connection to security light complete all as specified and as directed.

Galvanaised iron tubing light grade of size 20 mm dia, 6 meter long suitable for 1.5 sqmm, 3 core cable of length 7 meter from looping box to street light connector, holding in MS clamp of size 25X2 mm thick at every one mtr used in each pole 04 Nos of clamps with necessary nut, bolts and washers etc and including PVC sheathed three core multistranded copper conductor cable of size 1.5 sqmm from looping box to security light fitting connector complete all as specified and directed.

Stay assembly complete with aceessories and stay rod 20mm dia and 180cm long, stay bow 14mm dia and 40cm long, stay wise of size 7/4mm, stranded galvanised including MS Galvanised stay plate 300mm x 300mm x 6mm, galvanised thimble stay clamps and loop type insulator complete all as specified and as shown in electric plate No. 01 of SSR Part-I (Specification). Note :- Excavation & concrete measured and paid separately.

Earthing complete with galvanised steel earth plate elcrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground) with top edge of plate not less than 1.5m below normal ground level connecting to the GI earthing strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron and GI Strip 32x6mm protected by provision of GI Light grade pipe of 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregrate with 40mm thick cover of RCC (1:2:4) raniforced with XPM (weight not less than 4Kg/sqm) and frame of angle iron 25x25x6mm with lugs 02 nos and 6mm dia MS bars handle made to shape, GI Light grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge for earth plate incl common salt and charcoal filling, test point made out of 75x50x6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/ dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50m all as per electrical plate no 3 of SSR 1991 Pt-I and connecting to earh test point incl testing on the site, complete all as specified and directed.

Earthing complete with steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanised iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and steel earthwire protected by provision of GI Medium grade pipe 15 mm bore including provision of concrete pit made from PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6 mm with lugs 02 No and with 6 mm dia MS bar handle made to shape GI medium grade 20 mm bore pipe for watering perforated at bottom, 1.75 metere long placed on top edge of earth plate, common salt and charcoal fittings, test point made out of 17 mm x 8 mm FI with fixing arrangement, funnel wire mesh and earth work in hard / dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 M all as per electrical plate No 5 of SSR Part- I connected to earth test point complete all as specified and directed or indicated including testing on completion.

Supply, laying, jointing and testing, laid in trenches/road crossing/under floor/on walls/on poles including clamps or passing through pipes, 1100 volts grade, LT XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor of following cross sectional area complete all as specified and directed.

Cross sectional area 150 Sqmm, 3.5 core.

Cross sectional area 120 Sqmm, 3.5 core.

Cross sectional area 95 Sqmm, 3.5 core.

Cross sectional area 70 Sqmm, 3.5 core.

Cross sectional area 50 Sqmm, 3.5 core.

Cross sectional area 35 Sqmm, 3.5 core.

Cross sectional area 25 Sqmm, 4 core.

Cross sectional area 16 Sqmm, 2 core.

Note for Srl item No. 14.00 :- (a) Earth work shall be measured and paid separately. (b) The quoted rates shall be deemed to be include the following :- (i) Colour code of LT cables shall be as per IS standard. (ii) Pre-dispatch inspection of LT cables shall be carried out at manufacture's factory by the rep of Accepting Officer before dispatching to site. (iii) Cable shall be marked or embossed as 'GE (N) Akhnoor' at every one metre length.

Cable jointing kit for 1100V grade cable for straight through joint complete, heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE, armoured, aluminium conductor cable of size 25 Sqmm to 50 sqmm, complete all as specified and directed.

Cable jointing kit for 1100V grade cable for straight through joint complete, heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE, armoured, aluminium conductor cable of size 70 Sqmm to 95 sqmm, complete all as specified and directed.

Street light bracket made out of 40mm dia medium grade GI pipe of 1.2m length bent to required shape suitable for fixing street light/security light fitting on Steel tubular pole/RCC pole/building wall including two Nos clamps made out 30mm X 5mm flat with suitable nuts and bolts (clamp type - as per site requirement) including two coats of aluminium paint over a coating of red oxide primer and Taking down of existing unserviceable rusted street light brackets with clamps, nuts and bolts etc. complete all as specified and directed.

Replacement for LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and directed.

Supply, Installation, commissioning and testing Polycarbonate ASTA CPRI approved OEM made 1.5 KW Street light Control panel made in POLYCARBONATE THERMOPLASTIC ENCLOSURES, UV resistance, anti-acid, anti corrosive & Fully Transparent Door for Vision. Street Light Timer DB supply by ASTA CPRI TEST REPORT IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. Enclouser with Polyurethane gasket internally embedded and Enclousers make Hensel/Clipsal. The manufacturer of panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports construction of like MS, SS will not be applicable. Each Board shall have individual routine test report of the manufacturer. Main Incomer MCB 16 Amp FP 10 KA - 1 No. Control MCB SP 2 Amp - 1 No. Contractor 3P 16 Amp with Digital Time Switch for Auto On/Off - 1 Set. LED Indicator RYB - 1 Set. Selector Switch for bypass Arrangement - 1 No. Street Light Control panel shall 1.5 KW complete with Suitable Glands, Mounting Clamp with Nut Bolts etc. Street Light Control panel complete mounted on angle legs of size 25x25x5mm frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer, legs grouted in PCC(1:2:4) Type B-1 (using 20 mm graded stone aggregate) including provision of opening for incomming/outgoing cables and testing complete all as specified and directed.

Supply, Installation, commissioning and testing Polycarbonate ASTA CPRI approved OEM made 2.5 KW Street light Control panel made in POLYCARBONATE THERMOPLASTIC ENCLOSURES, UV resistance, anti-acid, anti corrosive & Fully Transparent Door for Vision. Street Light Timer DB supply by ASTA CPRI TEST REPORT IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. Enclouser with Polyurethane gasket internally embedded and Enclousers make Hensel/Clipsal. The manufacturer of panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current-Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports construction of like MS, SS will not be applicable. Each Board shall have individual routine test report of the manufacturer. Main Incomer MCB 25 Amp FP 10 KA - 1 No. Control MCB SP 2 Amp - 1 No. Contractor 3P 25 Amp with Digital Time Switch for Auto On/Off - 1 Set. LED Indicator RYB - 1 Set. Selector Switch for bypass Arrangement - 1 No. Street Light Control panel shall 2.5 KW complete with Suitable Glands, Mounting Clamp with Nut Bolts etc. Street Light Control panel complete mounted on angle legs of size 25x25x5mm frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer ,legs grouted in PCC(1:2:4) Type B-1 (using 20 mm graded stone aggregate) including provision of opening for incomming/outgoing cables and testing complete all as specified and directed.

Supply, Installation, commissioning and testing Polycarbonate ASTA CPRI approved OEM made 4 KW Street light Control panel made in POLYCARBONATE THERMOPLASTIC ENCLOSURES, UV resistance, anti-acid, anti corrosive & Fully Transparent Door for Vision. Street Light Timer DB supply by ASTA CPRI TEST REPORT IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. Enclouser with Polyurethane gasket internally embedded and Enclousers make Hensel/Clipsal. The manufacturer of panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports construction of like MS, SS will not be applicable. Each Board shall have individual routine test report of the manufacturer. Main Incomer MCB 40A FP 10 KA - 1 No. Control MCB SP 2Amps - 1 No. Contractor 3P 40 Amp with Digital Time Switch for Auto On/Off - 1 Set. LED Indicator RYB - 1 Set. Selector Switch for bypass Arrangement - 1 No. Street Light Control panel shall 4 KW complete with Suitable Glands, Mounting Clamp with Nut Bolts etc. Street Light Control panel complete mounted on angle legs of size 25x25x5mm frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer, legs grouted in PCC(1:2:4) Type B-1 (using 20 mm graded stone aggregate) including provision of opening for incomming/outgoing cables and testing complete all as specified and directed.

Supply, Installation, commissioning and testing Polycarbonate ASTA CPRI approved OEM made LT FEEDER PILLAR shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance, anti-acid, anti corrosive & Fully Transparent Door for Vision The manufacturer of panel shall submit a copy of ASTA CPRI TEST REPORT . The gasket should be internally embedded made of polyurethane. The panel should pass glow wire test,flame retardant and self-extinguishing. The manufacturer of panel shall submit a copy of his CPRI TEST REPORTS with Short Circuit Test IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. The CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only . LT junction box cubical type of size as per suitable,415 volts for outdoor use ,machine pressed front opening with single door with provision of rubber beading and locking system complete mounted on angle legs of size 25x25x5mm frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer ,legs grouted in PCC(1:2:4) Type B-1 (using 20 mm graded stone aggregate) including provision of opening for incomming/outgoing cables and testing complete all as directed. Incommer (a) MCCB 100A 16KA FP Thermal Magnetic released with Spreader Links - 1 No. (b) Digital VAF Meter with Volt Am, Frequency - 01 No. (c) LED Indicator RYB - 1 Set. (d) CT coils 100/5 A - 3 Nos. (e) Copper Bus Bar 100A TPN (10x6mm). Out going (a) MCCB 40 A, 4 pole breaking capacity of 10 KA - 02 Nos. (b) MCB 20A 2 pole - 2 Nos.

Supply, Installation, commissioning and testing Polycarbonate ASTA CPRI approved OEM made LT FEEDER PILLAR shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance,anti-acid, anti corrosive & Fully Transparent Door for Vision The manufacturer of panel shall submit a copy of ASTA CPRI TEST REPORT. The gasket should be internally embedded made of polyurethane. The panel should pass glow wire test,flame retardant and self-extinguishing. The manufacturer of panel shall submit a copy of his CPRI TEST REPORTS with Short Circuit Test IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. The CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only . LT junction box cubical type of size as per suitable, 415 volts for outdoor use, machine pressed front opening with single door with provision of rubber beading and locking system complete mounted on angle legs of size 25x25x5mm frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer ,legs grouted in PCC(1:2:4) Type B-1 (using 20 mm graded stone aggregate) including provision of opening for incomming/outgoing cables and testing complete all as directed. Incommer (a) MCCB 63 A 16KA FP Thermal Magnetic released with Spreader Links - 1 No. (b) Digital VAF Meter with Volt Am, Frequency - 01 No. (c) LED Indicator RYB - 1Set. (d) CT coils 63/5 A - 3 Nos. (e ) Copper Bus Bar 63A TPN (8x4 mm). Out going MCCB 20 A, 4 pole - 03 Nos.

Supply, Installation, commissioning and testing Polycarbonate ASTA CPRI approved OEM made LT FEEDER PILLAR shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance, anti-acid, anti corrosive & Fully Transparent Door for Vision The manufacturer of panel shall submit a copy of ASTA CPRI TEST REPORT . The gasket should be internally embedded made of polyurethane. The panel should pass glow wire test,flame retardant and self-extinguishing. The manufacturer of panel shall submit a copy of his CPRI TEST REPORTS with Short Circuit Test IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. The CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only . LT junction box cubical type of size as per suitable,415 volts for outdoor use, machine pressed front opening with single door with provision of rubber beading and locking system complete mounted on angle legs of size 25x25x5mm frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer, legs grouted in PCC(1:2:4) Type B-1 (using 20 mm graded stone aggregate) including provision of opening for incomming/outgoing cables and testing complete all as directed. Incommer (a) MCCB 40 A 16KA FP Thermal Magnetic released with Spreader Links - 1 No. (b) LED Indicator RYB - 1 Set. (c) Digital VAF Meter with Volt Am, Frequency - 01 No. (d) CT coils 40/5 A - 3 Nos. (e ) Copper Bus Bar 40A TPN (6x4 mm). Out going MCCB 10 A, 4 pole - 04 Nos.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.

All as per Srl item No. 25 here-in-before but for depth exceeding 1.5m and not exceeding 3.00m deep.

Cement concrete 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or pole coping of size 300x300 mm or chamfered on edges including use of form work complete all as specified and directed.

Returning, filling in any type of soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Real type insulator 65 mm dia x 31 mm hole x 20 mm hole complete all as specified and directed.

Double walled corrugated (DWC) pipe of size 40mm/ 32 mm (OD/ID) including snap fit coupler conforming to IS14930 (Pt-II) IS16205 (Pt-II) for protection of cable in underground complete all as specified and directed.

Double walled corrugated (DWC) pipe of size 63mm /51mm (OD/ID) including snap fit coupler conforming to IS14930 (Pt-II) IS16205 (Pt-II) for protection of cable in underground complete all as specified and directed.

Double walled corrugated (DWC) pipe of size 75mm /63mm (OD/ID) including snap fit coupler conforming to IS14930 (Pt-II) IS16205 (Pt-II) for protection of cable in underground complete all as specified and directed.

Double walled corrugated (DWC) pipe of size 90mm /76mm (OD/ID) including snap fit coupler conforming to IS14930 (Pt-II) IS16205 (Pt-II) for protection of cable in underground complete all as specified and directed.

Double walled corrugated (DWC) pipe of size 120mm /103mm (OD/ID) including snap fit coupler conforming to IS14930 (Pt-II) IS16205 (Pt-II) for protection of cable in underground complete all as specified and directed.

Double walled corrugated (DWC) pipe of size 160mm /135mm (OD/ID) including snap fit coupler conforming to IS14930 (Pt-II) IS16205 (Pt-II) for protection of cable in underground complete all as specified and directed.

Deduction to be made from BOQ for Sch 'A' Part - II (Schedule of credit) Amount of Rs. 2,15,515.00 during AOC. Note :- Tenderers shall not quote for this schedule.