Military Engineer Services Tender

S & F Air terminal single pointed aluminum rod 12mm dia and 300mm long including taking down old u/s air termination rod of any type all as specified and as directed.

Supply and laying GI pipe light grade with all fittings for protection of earthing conductor laid in trenches or fixing to wall with suitable size of FI clamp complete of 40 mm bore dia including taking down old pipe etc

Description all as per item no 5.00 but of 20mm bore as in protection for GI Earth wire or for watering arrangement all as specified and as directed by Engineer In Charge

S & F Porcelain/PVC insulator not less than 75mm long, 30mm thick, with suitable fixing nuts, bolts and washers suitable for strip connection complete including taking down old u/s insulator all as specified and directed by Engr-in-charge.

Excavation in trenches n.exc 1.5 M wide and n.exc. 1.5 M in depth and getting out in hard/dense soil all as directed by Engr-in-Charge

Excavation in trenches n.exc 1.5 M wide and depth exc. 1.5 M in and getting out in hard/dense soil all as directed by Engr-in-Charge

Returning filling in including spreading levelling and well ramming in n.exc. 25 Cum complete all as directed by Engr-in-Charge.

Removing the excavated material n.exc. 50m and depositing where directed at & level n.exc. 1.5m above the starting point all as directed by Engr-in-charge.

Supply and fix HDPE/FRP earth pit cover square type of size internal size not less than 300x300mm with top openable cover with handle and one side hinges, provision for entry/exit of earth strip at side all as specified and as directed including taking down old Make : True Power Earthing/Trimurty Earthing/ERICO/Dhruva Tech

S & F GI Funnel with wire mesh including taking down old funnel

M & L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level,earth plate surrounded from all sides by 15mm thick and packed layer of charcoal dust and common salt filling in alternate layers excluding refilling with good earth specified and electrode connections by using GI iron strip of 32x6mm size by means of bolts,nuts,checknuts and washers made of GI and provision of GI pipe medium grade 40 mm dia for protection of earthing lead and 20mm dia for watering arrangement Including funnel,wire mesh Including Taking out old unserviceable earthpit necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50mtr all as specified and shown on plate No5 of SSR part-1 2009.

M&L for Earthing complete with earthing using copper earth plate electrode of size 60×60cm.× 3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level,earth plate surrounded from all sides by 15mm thick and packed layer of charcoal dust and common salt filling in altemate layers excluding refilling with good earth specified and electrode connections by using Copper strip of 20x3mm size by means of bolts,nuts,checknuts and washers made of copper/brass and provision of GI pipe medium grade 40 mm dia for protection of earthing lead and 20mm dia for watering arrangement excluding funnel,wire mesh, Including Taking out old unserviceable earthpit necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50mtr all as specified and shown on plate No5 of SSR part-1 2009.

M&L for Earthing complete with earthing Electrode50/3 MTPPC Model,Length(mtr),Terminal size,Inner Strip,Outer pipe diameter,THK,Model,Length ,Terminal size,inner strip,outer pipe diameter,THK,Supply and installation of earthing with pure copper electrode(MTPPC) 50 mm dia 3 mtr long with BFC Compound Maintenance Free 25-25 Kgs BFC Bags. CPRI Approved, Including Taking out old unserviceable earthpit necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50mtr all as specified and shown on plate No5 of SSR part-1 2009.

M&L for Earthing complete with earthing Electrode 50/3 MTPPC Model,Length(mtr),Terminal size,Inner Strip,Outer pipe diameter,THK,Model,Length ,Terminal size,inner strip,outer pipe diameter,THK,Supply and installation of earthing with pure copper electrode(MTPPC) 50 mm dia 3 mtr long with BFC Compound Maintenance Free 25-25 Kgs BFC Bags. CPRI Approved,including making of triport with GI Strip 25/3 mm of at least 10 mm Including Taking out old unserviceable earthpit necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50mtr all as specified and shown on plate No5 of SSR part-1 2009.Supply and installation of advance maintinance free Tripot ring Earthing System by boring the required nos of holes in sami hard soil or hard soil conisisting of 03 (Three) Nos UL-467 listed and CPRI tested copper bounded high tensile low carbon steel core electrode rod of 17.2 mm dia with a miniumum coating thickness of 250 microns and length of 3 mtrs tested according IEC 62561-2 with min 10 years life span(the rod should be marked as per the UL certification) incl min 25 kgs/electrode of earth enhancing compound (PROCEM) NABL certified CPRI tested ecofriendly tested as per the IEC 62561-Z and needs to be considered to fill the 100 mm bored hole surrouning to the electrode. The earth enhancing compound should have resitivity less than 50 ohms -meter with chemically inert to sub soil that should not pollute the enviroument and non corosive to the earth electrode itself

S & Fill common salt in alternate layers in earth pit all as specified and as directed

Supply and fill Charcoal dust in earthing pit

Supply and fill Magnesium Sulphate in earthing pit all as directed by Engineer In Charge

Supply and fill Earth enhancement compound (GeM) Make : Truepower/Ashgel/Dhruva

S & F Marking Earthing Pit with white/ coloured Hylam sheet/per pex sheet 3mm thick of size 200x150 mm fixed with MS angle iron 20X20X4 mm and .75 mtr long lncluding painting with synthetic eneamelled paints 2 coats over a coat of red oxide primer fixed by means of 2 nos nuts,bolts,washer of suitable size and grout the maker nearer to the earth pit with PCC 1:2:4 of size 0.15 x 0.15x 0.15 m including necessary earth work.Maker shall be written the following letters (letter of size 25 mm). EARTH PIT NO : EQUIPMENT/BUILDING CONNECTED : DATE OF TEST : EARTH RESISTANCE IN OHMS :

Supply & fix 15mm nominal bore tubes, medium grade galvanised with all fittings fixed on walls,ceiling,laid in floors or burried under the ground for filling of water in earthing pit including inserting suitable size of tee with outgoing water deilvery pipe line from PVC over head tank to earthing pit complete all as specified and as directed by Engr-in-charge.

Supply & fix 15mm dia stop valves cast copper alloy screwed down high pressures, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.

Supply & fix 15 mm Taps of cast iron or malleable cast iron galvanised,screwed for GI pipe and fixed with 15mm dia bore pipe for filling water to earth pit.complete all as specified and directed by Engr-in-charge.

Cutting the existing GI tubing 15/20/25 mm bore inserting suitable size of Tee reducer and union for taking out connection for filling water in earthing pit including making good as existing completeall as per specified and directed by engineer-in-charge.

M & L for Brazing of existing earth strip connections complete for existing improvement of existing earth pits all as specified and as directed.

Material and labour for inspection and testing of earthing pits as and when required for quaterly audit of the earth pits complete with provision of adequate manpower alongwith earthing testing equipment duly caliberated. Recording of data & earthing results is tabuler form, generation of reports and submitting printouts, taking signatures of user & MES reps all as directed by Engr-in Charge . Notes:- 1. Rate shall be inclusive of provn of adequate manpower, tools & Plant, earth tester, stationary etc. 2. The work shall be supervised by licenced electrical supervisor and certificate in this respect shall be submitted before acceptance of the contract failing which tender will not be accepted. Also at any point during currency of the contract if it is found that there is no electrical supervisor available with the contractor , execution of work will not be allowed and tender will be cancelled with necessary recovery from the contractor. 3. Inspection & testing of 01 earthing will be considered as 01 Job.

M & L PCC for chamber of earth pit with PCC 1:2:4 type B-2 including demolate old u/s chamber of earthing pit all as specified and as directed by Engineer In Charge.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the Air Force station