Military Engineer Services Tender

Supply, Installation, Testing and Commissioning of a suitable OPC server for unlimited tags with MODBUS TCP/equivalent driver having provision for IOT gateway to exchange data between the PLC based panels to be installed at site and the SCADA system complete all as specified and directed.

Supply, Installation, Testing and Commissioning of Static IP with Broadband connection by the name GE(Utilities) Udhampur of any service provider of excellent speed.for the period of 2 year from date of completion of work. Note: Connection, Hardware and service charge for the complete functioning of the system deemed to be included in the quoted rate.

Supply installing, connecting, testing and commissioning of indoor PLC (Programmable Logic Controller) based Master monitoring / Annunciating control Panel and automation compatible pump motor starter panel at Albert Ekka Enclave. PLC panel of adequate size having degree of ingress protection IP-54, cubicle type, floor mounted made out of 2.0 mm thick CRCA sheet as per 61439 Part I &II type tested assembly. MS angle section 50mmx50mmx6 mm frame & compartmentalized for following equipments controls and door etc with front openable, single door system lockable/openable by keys from front side having flush pattern fancy locks with louvers & air vent gasket for natural flow of air for 1 phase, 2 wire, 240 volts, 50 Hz and CPRI approved make, factory made in approved factory duly powder coated externally as well as internally provided with suitable ''U'' type gasket to make it dust and vermin proof & genral construction confirming to IS:8623/93, with provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the feeder piller box safely including containing of detachable plate having provision for entry of armoured cable of adequate size with glands and mounted on a powder coated metal stand including and other jointing/ Plugging material as:- (A) Motorised Valve of distribution header and sump ( 06+01 Nos) (B) Magnetic level Sensor for Semi UG sump (01No) (C) Pump sets (02 Nos)

Srl item No. 06 Contd … The panel shall consist of the following equipments :- (a) Selector Switch ( Main AUTO / MAN Mode, VALVE Mode, Pump AUTO / MAN Mode). (b) Indicator Lamp 230V AC (RED, YELLOW, GREEN, BLUE) . (c) Relays / Relay card (24 V DC, 230V AC) (d) Hooter/Alarm 230 V AC/24 V DC (e) Push Buttons & Push Button with LED indicator (24V DC, 240V AC). (f) SMPS of suitable current & voltage rating. INPUT 230V AC & OUT 24 VDC, 5 A. (g) step down Transformer of input 230VAC & output 12VAC, 2A. (h) Programmable Logic Controller (PLC 24V DC). (j) 0.5 sqmm internal control wiring. k) Separate MCB’s for 24VDC & 230 VAC equipment & internal wiring. Supply: 240V, 50 Hz Mounting: Wall Mounting type. (l) Water level controller. m) GPRS MODEM with antenna and Power adaptor n) Human Machine Interface (HMI 7Inch touch screen) colour display. o) UPS 5KVA 230V AC for minimum 30 min of battery backup for running of PLC Panels. Note :- Details specification and description of pump motor starter panel are as specified at particulas speciofication.

Supply, installing, connecting, testing and commissioning of PLC (Programmable Logic Controller) based Master monitoring/ Annunciating control Panel and automation compitable pump motor starter panel at Naubat Ram Vihar. PLC panel of adequate size having degree of ingress protection IP-54, cubicle type, floor mounted made out of 2.0 mm thick CRCA sheet as per 61439 Part I &II type tested assembly. MS angle section 50mmx50mmx6 mm frame with sloping roof top type panel cover & compartmentalized for following equipments controls, and door etc with front openable, single door system lockable/openable by keys from front side having flush pattern fancy locks with louvers & air vent gasket for natural flow of air for 1 phase, 2 wire, 240 volts, 50 Hz and CPRI approved make, factory made in approved factory duly powder coated externally as well as internally provided with suitable ''U'' type gasket to make it dust and vermin proof & genral construction confirming to IS:8623/93, with provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the feeder piller box safely including containing of detachable plate having provision for entry of armoured cable of adequate size with glands and mounted on a powder coated metal stand including and other jointing/ Plugging material complete with comprising of the following:- (a) Motorised Valve of distribution header and sump ( 06+01 Nos) b) Magnetic level Sensor for Semi UG sump (01No) (c) pump sets (02 Nos)

Srl item No. 07 Contd … The panel shall consist of the following equipments :- (a) Selector Switch (Main AUTO/MAN Mode, VALVE Mode, Pump AUTO/MAN Mode). (b) Indicator Lamp 230V AC (RED, YELLOW, GREEN, BLUE) . (c) Relays / Relay card (24 V DC, 230V AC) (d) Hooter/Alarm 230 V AC/24 V DC (e) Push Buttons & Push Button with LED indicator (24V DC, 240V AC). (f) SMPS of suitable current & voltage rating. INPUT 230V AC & OUT 24 VDC, 5 A. (g) step down Transformer of input 230VAC & output 12VAC, 2A. (h) Programmable Logic Controller (PLC 24V DC). (j) 0.5 sqmm internal control wiring. k) Separate MCB’s for 24VDC & 230 VAC equipment & internal wiring. Supply: 240V, 50 Hz Mounting: Wall Mounting type. (l) Water level controller. m) GPRS MODEM with antenna and Power adaptor n) Human Machine Interface (HMI 7Inch touch screen) colour display. o) UPS 5KVA 230V AC for minimum 30 min of battery backup for running of PLC Panels. Note :- Details specification and description of pump motor starter panel are as specified at particulas speciofication.

Supply, installing, connecting, testing and commissioning of PLC (Programmable Logic Controller) based Master monitoring/ Annunciating control Panel and automation compitable pump motor starter panel at Sansar Chand Vihar. PLC panel of adequate size having degree of ingress protection IP-69, cubicle type, floor mounted made out of 2.0 mm thick CRCA sheet as per 61439 Part I &II type tested assembly. MS angle section 50mmx50mmx6 mm frame with sloping roof top type panel cover & compartmentalized for following equipments controls, and door etc with front openable, single door system lockable/openable by keys from front side having flush pattern fancy locks with louvers & air vent gasket for natural flow of air for 1 phase, 2 wire, 240 volts, 50 Hz and CPRI approved make, factory made in approved factory duly powder coated externally as well as internally provided with suitable ''U'' type gasket to make it dust and vermin proof & genral construction confirming to IS:8623/93, with provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the feeder piller box safely including containing of detachable plate having provision for entry of armoured cable of adequate size with glands and mounted on a powder coated metal stand including and other jointing/ Plugging material complete with comprising of the following:- (a) Motorised Valve of distribution header and sump ( 06+01 Nos) (b) Magnetic level Sensor for Semi UG sump (01No) (c) pump sets (02 Nos)

Srl item No. 08 Contd … The panel shall consist of the following equipments :- (a) Selector Switch (Main AUTO/MAN Mode, VALVE Mode, Pump AUTO/MAN Mode). (b) Indicator Lamp 230V AC (RED, YELLOW, GREEN, BLUE) . (c) Relays / Relay card (24 V DC, 230V AC) (d) Hooter/Alarm 230 V AC/24 V DC. (e) Push Buttons & Push Button with LED indicator (24V DC, 240V AC). (f) SMPS of suitable current & voltage rating. INPUT 230V AC & OUT 24 VDC, 5 A. (g) step down Transformer of input 230VAC & output 12VAC, 2A. (h) Programmable Logic Controller (PLC 24V DC). (j) 0.5 sqmm internal control wiring. (k) Separate MCB’s for 24VDC & 230 VAC equipment & internal wiring. Supply: 240V, 50 Hz Mounting: Wall Mounting type. (l) Water level controller. (m) GPRS MODEM with antenna and Power adaptor (n) Human Machine Interface (HMI 7Inch touch screen) colour display. (o) UPS 5KVA 230V AC for minimum 30 min of battery backup for running of PLC Panels. Note :- Details specification and description of pump motor starter panel are as specified at particulas speciofication.

Supply, installing, connecting, testing and commissioning of design automation Panel of adequate size having degree of ingress protection IP-69, cubicle type, floor mounted made out of 1.8 mm thick CRCA sheetas per 61439 Part I &II type tested assembly. The panel builder should be channel partnet of ABB/L&T/Siemens, MS angle section 50mmx50mmx6 mm frame with sloping roof top type panel cover & compartmentalized for following equipments controls, and door etc with front openable, single door system lockable/openable by keys from front side having flush pattern fancy locks with louvers & air vent gasket for natural flow of air for 1 phase, 2 wire, 240 volts, 50 Hz and CPRI approved make, factory made in approved factory duly powder coated externally as well as internally provided with suitable ''U'' type gasket to make it dust and vermin proof & genral construction confirming to IS:8623/93, with provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the feeder piller box safely including containing of detachable plate having provision for entry of armoured cable of adequate size with glands and mounted on a powder coated metal stand including and other jointing material complete with comprising of the following:- a) Magnetic level Sensor for OHT water level control (01 to 05 Nos as per site requirement) b) Single phase motorised operating valves control (01 to 05 Nos as per site requirememts)

Srl item No. 09 Contd … The panel shall consist of the following equipments :- (a) Selector Switch (Main AUTO/MAN Mode, VALVE Mode, Pump AUTO/MAN Mode). (b) Indicator Lamp 230V AC (RED, YELLOW, GREEN, BLUE) . (c) Relays / Relay card (24 V DC, 230V AC) (d) Hooter/Alarm 230 V AC/24 V DC. (e) Push Buttons & Push Button with LED indicator (24V DC, 240V AC). (f) SMPS of suitable current & voltage rating. INPUT 230V AC & OUT 24 VDC, 5 A. (g) step down Transformer of input 230VAC & output 12VAC, 2A. (h) Programmable Logic Controller (PLC 24V DC). (j) 0.5 sqmm internal control wiring. (k) Separate MCB’s for 24VDC & 230 VAC equipment & internal wiring. Supply: 240V, 50 Hz Mounting: Wall Mounting type. (l) Water level controller. (m) GPRS MODEM with antenna and Power adaptor (n) Human Machine Interface (HMI 7Inch touch screen) colour display. (o) UPS 5KVA 230V AC for minimum 30 min of battery backup for running of PLC Panels. Note: PLC Panel Charges are including GPRS Communication charges for two year after successful completion of project.

Supply, Installation, Testing and commissioning of Flow/Pressure Switch of designed line pressure 1-10KG/sq.cm with Pressure Guage and necessary fittings with proper wiring and to be fixed in deliver line of each pump sets as directed by Engineer in charge.

Supply, Installation, Testing and commissioning of Rust proof, maintenance free Magnetic float switch sensors for OH tanks with following specifications: Principle: Magnetic, Magnet: Ferrite Ring: Float and Guide: ABS, Switch: Reed , Connection cable: 2 core Teflon Cable and to be fixed in each over head tank/semi UG sumps as directed by Engineer in charge. Note: 47 Nos for Bldgs and 03 Nos for semi UG sump and each tank have two sensors..

Supply, Installation, Testing and commissioning of Air releasing solenoid valve having 10mm dia, 230 V AC operated coil complete all as specified & directed.

Supply, Installation, Testing and commissioning of Priming solenoid valve/ Actuator having 25mm dia, 230 V AC operated coil complete all as specified & directed.

Supply, Installation, Testing and commissioning of motor actuated butterfly valve with the following specifications including all accessories (CI/GI/MS fittings required at site) complete as directed by Engineer-in-Charge. (a) Valve size 80mm dia. (b) Designed line pressure 8 kg/Sqcm (c) Operating Angle : 90 degrees (d) Disc material CI with nylon coating (e) Limit switches : 02 Nos for open and close (f) Mounting : Splash proof-Direct on valve/ Extended type as per site requirement. (g) Input Supply : 230V, AC, 50 HZ (h) In built wireless modem compatibility for remote communication (j) Valve position indication with an output of 4-20m A (k) The actuator should be capable of accepting 4-20m A of input of regulating purposes (l) Mannual Operation : Hand Wheel/Rapid Control

Supply, Installation, Testing and commissioning of motor actuated butterfly valve with the following specifications including all accessories (CI/GI/MS fittings required at site) complete as directed by Engineer-in-Charge. (a) Valve size 150mm dia. (b) Designed line pressure 8 kg/Sqcm (c) Operating Angle : 90 degrees (d) Disc material CI with nylon coating (e) Limit switches : 02 Nos for open and close (f) Mounting : Splash proof-Direct on valve/ Extended type as per site requirement. (g) Input Supply : 230V, AC, 50 HZ (h) Inbuilt wireless modem compatibility for remote communication (j) Valve position indication with an output of 4-20m A (k) The actuator should be capable of accepting 4-20m A of input of regulating purposes (l) Mannual Operation : Hand Wheel/Rapid Control

Supply, Laying/ Fixing on wall 6 core, 1.5 sqmm cross sectional area armoured copper conductor cables, 1100 volts grade heavy duty cable PVC insulated and PVc sheathed, laid in trenches/ laid under floor or fixed maked with walls / on poles/in ducts/in GI pipes etc complete all as specified.

Supply, Laying / Fixing on wall 4 core, 1.5 sqmm cross sectional area copper conductor cables, 1100 volts grade heavy duty cable PVC insulated and PVc sheathed, laid in trenches/ laid under floor or fixed maked with walls / on poles/in ducts/in GI pipes etc complete all as specified.

Supply, Laying/ Fixing on wall 2 Pair, 0.5 sqmm cross sectional area copper conductor cables, 1100 volts grade heavy duty cable PVC insulated and PVc sheathed, laid in trenches/ laid under floor or fixed maked with walls / on poles/in ducts/in GI pipes etc complete all as specified.

Supply, Laying/ Fixing on wall 2 core, 1.5 sqmm cross sectional area copper conductor cables, 1100 volts grade heavy duty cable PVC insulated and PVC sheathed, laid in trenches/ laid under floor or fixed maked with walls / on poles/in ducts/in GI pipes etc complete all as specified.

Excavating in trenches not exc 1.8 metre wide and not exc 0.6 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in loose/ soft soil.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil,complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

Cutting of existing road/ Path/ Hard standing for crossing of DWC Tubing for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing with pre mix bituminuos carpet complete all as specified and directed.

Supply, Laying/ Fixing on wall DWC tubing of size 40/32 mm dia for laid in trenches for protection of cables complete all as specified and directed.

Supply and fixing of Snap- Fit Coupler for jointing of DWC tubing of size 40/32 mm dia complete all as specified and directed.

Supply Laying Fixing on wall of DWC tubing of size 40/32 mm dia for protection of cables complete all as specified and directed including all fittings and fixed to walls of buildings with required size of flat iron clamps, bolts, nuts and washers for protection of DWC complete all as specified and directed.

Supply, Installation, Testing and Commissioning of A3 size Laserjet Printer. Print speed black: Up to 14 ppm Print technology: Laser, Processor speed 234 MHz Connctivity: included components Laser Jet Print Cartridge, Getting Started guide, Printer documents and Software on CD-ROM, power cord.