Military Engineer Services Tender

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including providing new HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed .

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including providing new HDPE pipe of 100 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including providing new HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed .

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including providing new HDPE pipe of 50 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed .

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation, laying of underground cable etc or n. exc 10 sqm on plan and n. exc 1.5 m in depth for foundations of poles, struts, stays etc. & getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directied.

Removal of surplus excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supplying and laying, factory made un-reinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other complete all as specified and directed.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 2 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 25 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 35 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 50 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 70 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 95 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 120 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 150 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 185 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 240 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 10 Sqmm, 2 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium solid conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 2 core nominal cross section in service connection complete all as specified and directed.

Supply and laying / fixing , GI pipe, light grade, 80mm bore for cable protection fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed.

Supply and laying / fixing , GI pipe, light grade, 40mm bore for cable protection fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed.

M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed ..

M&L for factory made bus bar chamber of size 750 x 600 x 500 mm, outdoor type, pedestal type, powder coated, made out of 3.15 mm thick CRCA sheet duly powder coated, dust and vermin proof complete with openable shutter in front & rear having proper locking arrangement duly mounted on angle iron frame 50x50x6 mm including necessary earth work & PCC in foundation in all respect including 250 Amp 415 Volt, 4 pole MCCB with thermal magnetic protection as incommer control and aluminium bus bar mounted on insulator, 500 Amps, 4 pole, suitable for 3 phase, 415 volts, 50 Hz AC supply including control wiring to panel with suitable size of PVC insulated and sheathed copper cable with phase indicator lamps (R, Y. B) – 01 Set. complete all as specified and directed.

M&L for factory made bus bar chamber of size 750 x 600 x 500 mm, outdoor type, pedestal type, powder coated, made out of 3.15 mm thick CRCA sheet duly powder coated, dust and vermin proof complete with openable shutter in front & rear having proper locking arrangement duly mounted on angle iron frame 50x50x6 mm including necessary earth work & PCC in foundation in all respect including aluminium bus bar mounted on insulator, 300 Amps, 4 pole, suitable for 3 phase, 415 volts, 50 Hz AC supply including control wiring to panel with suitable size of PVC insulated and sheathed copper cable with phase indicator lamps (R, Y. B) – 01 Set. complete all as specified and directed.

Supply & fix thermoplastic polystyrene polycarbonate junction box of size 210 X 155 X 92 mm, shock proof with IP 66 protection with suitable connector for three phase loop in loop out branch out and vibration proof connection and fixing on LT/HT poles using MS clamp made out of 25mm x 3mm MS flat (02 Nos) and nuts & bolts of required size complete all as specified and directed .

Supply, installation, testing and commissioning of factory made LT panel board, CPRI approved , suitable for 3 phase, 4 wire, 415 Volts, AC supply, outdoor type, dust and vermin proof, totally enclosed, platform mounted (protection class IP-54) made out of 3.15 mm thick CRCA sheet,front openable shutter with locking arrangements with frame made out of MS angle 50 x 50 x 6 mm thick duly painted including necessary foundation bolts grouted in PCC (1:2:4) type B1 for mounting the panel including complete internal wiring with copper conductor comprising of following accessories with sufficient working space with and including to accomodate the following accessories: - (a) INCOMING (i) Aluminium bus bar 300 Amps, TPN of suitable length and of cross section as per design with colour codding. Bus bar shall be designed to withstand a fault level of 36 KA at 415 volts. (ii) MCCB with thermal magnetic protection 200 Amp, 4 pole, 25 KA - 01 No (iii) Voltmeter 0-500 volts with selector switch - 01 No. (iv) Ammeter 0-500 volts with selector switch - 01 No. (v) LED Indicator lamp RYB - 01 Set (set of 3 ) (b) OUTGOING (i) MCCB with thermal magnetic protection 100 Amp, 4 pole, 16 KA - 01 No (ii) MCCB with thermal magnetic protection 63 Amp, 4 pole, 16 KA - 02 Nos (iii) MCB DP 32 Amp -01 No

Supply, installation, testing and commissioning of factory made LT panel board, CPRI approved , suitable for 3 phase, 4 wire, 415 Volts, AC supply, outdoor type, dust and vermin proof, totally enclosed, platform mounted (protection class IP-54) made out of 3.15 mm thick CRCA sheet,front openable shutter with locking arrangements with frame made out of MS angle 50 x 50 x 6 mm thick duly painted including necessary foundation bolts grouted in PCC (1:2:4) type B1 for mounting the panel, complete internal wiring with copper conductor comprising of following accessories with sufficient working space with and including to accomodate the following accessories: - (a) INCOMING (i) Aluminium bus bar 160 Amps, TPN of suitable length and of cross section as per design with colour codding. Bus bar shall be designed to withstand a fault level of 36 KA at 415 volts. . (ii) MCCB with thermal magnetic protection 100 Amp, 4 pole, 16 KA - 01 No (iii) Voltmeter 0-500 volts with selector switch - 01 No. (iv) Ammeter 0-500 volts with selector switch - 01 No. (v) LED Indicator lamp RYB - 01 Set (set of 3) (b) OUTGOING (i) MCCB with thermal magnetic protection 63 Amp, 4 pole, 16 KA -03 Nos (ii) MCB DP 32 Amp -01 No

Supply, installation, testing and commissioning of factory made LT panel board, CPRI approved , suitable for 3 phase, 4 wire, 415 Volts, AC supply, outdoor type, dust and vermin proof, totally enclosed, platform mounted (protection class IP-54) made out of 3.15 mm thick CRCA sheet,front openable shutter with locking arrangements with frame made out of MS angle 50 x 50 x 6 mm thick duly painted including necessary foundation bolts grouted in PCC (1:2:4) type B1 for mounting the panel, complete internal wiring with copper conductor comprising of following accessories with sufficient working space with and including to accomodate the following accessories: (a) INCOMING (i) Aluminium bus bar 400 Amps, TPN of suitable length and of cross section as per design with colour codding. Bus bar shall be designed to withstand a fault level of 36 KA at 415 volts. (ii) MCCB with thermal magnetic protection 250 Amp, 4 pole, 25 KA - 01 No (iii) Voltmeter 0-500 volts with selector switch - 01 No. (iv) Ammeter 0-500 volts with selector switch - 01 No. (v) LED Indicator lamp RYB - 01 Set (set of 3) (b) OUTGOING (i) MCCB with thermal magnetic protection 63 Amp, 4 pole, 16 KA -05 Nos (ii) MCCB with thermal magnetic protection 40 Amp, 4 pole, 16 KA -02 Nos

Supply, installation, testing and commissioning of factory made LT panel board, CPRI approved , suitable for 3 phase, 4 wire, 415 Volts, AC supply, outdoor type, dust and vermin proof, totally enclosed, platform mounted (protection class IP-54) made out of 3.15 mm thick CRCA sheet,front openable shutter with locking arrangements with frame made out of MS angle 50 x 50 x 6 mm thick duly painted including necessary foundation bolts grouted in PCC (1:2:4) type B1 for mounting the panel, complete internal wiring with copper conductor comprising of following accessories with sufficient working space with and including to accomodate the following accessories: (a) INCOMING (i) Aluminium bus bar 600 Amps, TPN of suitable length and of cross section as per design with colour codding. Bus bar shall be designed to withstand a fault level of 36 KA at 415 volts. (ii) MCCB with thermal magnetic protection 400 Amp, 4 pole, 36 KA - 01 No (iii) Voltmeter 0-500 volts with selector switch - 01 No. (iv) Ammeter 0-500 volts with selector switch - 01 No. (v) LED Indicator lamp RYB - 01 Set (set of 3) (b) OUTGOING (i) MCCB with thermal magnetic protection 100 Amp, 4 pole, 16 KA -04 Nos (ii) MCCB with thermal magnetic protection 40 Amp 4 pole, 16 KA -02 Nos ( 01 stand by)

M&L in repair for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to GI strip 25x4mm by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 4.00 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,40mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth strip protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed.

M&L for cutting of bituminous road / floor for laying of pipe / cables, not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling the material ,watering, well ramming / compacting and making good with 100 mm thick PCC 1:2:4,type B-1 complete all as specified and directed.