Military Engineer Services Tender

M&L for 6 mm thick corrugated or semi corrugated AC sheet fixed with J type hook bolts in roof walls etc all as specified and diretced.

M&L for asbestos cement one pieces plain angullar ridge 6 mm thick fixed with J type hook bolts all as specified and as directed.

S&F galvanised 0.63 mm corrugated mild steel sheeting with two corrugations side lap fixed with J type hook bolts in roof wall etc with grade of zinc coating 275/

S&F plain galvanised 0.63 mm mild steel sheeting in ridges, hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc caoting 275

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots all as specified.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L for 10 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:6, finished fair and even without using extra cement complete all as specified.

Preparing new plastered surfaces of walls and applying two coats of cement base paint, over a coat of alkali resistant priming paint (including two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint on roof boarder, drops, fins, chajja / roof facia, column etc) complete all as specified

Dismantling of Brickwork of stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6)

.-ditto- as per above but except brick

M&L for preparing new plastered surfaces Applying two coats of OBD/on new plastered surface over a coat of primer of any description of approved tint over new plastered surface.

Preperation of old plastered or unplastered surfaces of wall by mechanical sander, brooming down or steel wire brushing scraping down oil & grease spots etc and applying one coats of acrylic distemper/distemper oil emulsion (OBD) on walls incl cornices with roller all as specified and as directed by Engr-in-Charge.

Preperation of old plastered or unplastered surfaces by mechanical sander, brooming down or steel wire brushing scraping down oil & grease spots etc and applying One coat of cement base paint on wall surfaces complete all as specified and as directed by Engr-in-Charge

M&L for one coat of exterior emulsion paint (Weather Coat) case of roof boarder, drops, fins, chajja / roof facia, column, walls etc, including preparation of old surfaces complete all as specified.

M&L for preperation of new surface and applying three coats of white washing on old wall surfaces of approved tint over new plastered surface, complete all as specified.

Preperation of old plastered or unplastered surfaces by mechanical sander, brooming down or steel wire brushing scraping down oil & grease spots etc and applying One coat of white washing on wall surfaces incl cornices complete all as specified and as directed by Engr-in-Charge

M&L one coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.

M&L one coat of synthetic enamel paint over old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.

M&L for preparation new or previously untreated steel surfaces applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer of any description and in any position, over 10 cms in width or girth not otherwise described

Demolition of cement concrete un reinforced, of any description any position complete all as specifie.

M&L for providing cement concrete type 1:2:4 type B-1(20 mm graded agg ) as in parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates complete all as specified.

Dismantling wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness incl cover fillets.

S&F Non Asbestos cement bldg board 4mm thick fixed to MS frame work with screws as in ceiling specified and directed.

All as per item No 28 above but except sheet

Providing & fixing false ceiling with gypsem based ceiling tiles and frame work ( with aluminium foil on one side) of size 595x595 mm of thickness not less than 9 mm incl with GI powder coated frame angle/tee grid frame work for ceiling with following specification (a) S&F Angle of side 25x25x1 mm powder coated (b) 25x25x1 mm GI powder coated at bottom tee as in main member (c) 25x25x1mm thick GI powder coated at bottom tee as in cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains levelling incl fixing to ceiling fasteners manufacturers instructions complete.

Preparing old decorated of ceiling surfaces applying a coat of white wash complete all as specified.

Preparing new ceiling surfaces applying two coats of white wash complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 290 grade E-165 complete all as specified.

S&F PVC (SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips as RWP complete all as specified.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified

Dismantling of pipes of any type or any description including all fittings and accessories, 110mm, 100mm and 75mm dia and in any position all as specified.

M&L for Welding in repairs n. exc 2.5cm in length all as specified and as directed.

M&L for taking down existing roof treatment of any description and any type all as specified and directed by Engr-in Charge

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm all as specifiedm and directed

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Plastering 10mm thick in cement mortar 1:4 on concrete surfaces using WPC @3% by weight of cement, finished even and smooth (b) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame.

Supply only liquid water proofing compound.

M&L for 50 mm thick in Plain cement concrete type C1 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M&L Two coats of oil bound distemper on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.

M&L for Plain cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.

Dismantling of timber scantling 40 Sq cm and over in section in any position in framed work.

Deduct Schedule of Credit of Rs. (-) 151555.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.