Border Security Force Tender

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 4 X 4 sq. mm + 2 X 4 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 4X 10 sq. mm + 2X 6 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 2 X 10 sq. mm + 1 X 6 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. i) 1 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. i) 3 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. i) 3 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. i) 20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. i) 25 mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (a) 200 mm x 300 mm x 60 mm deep (For loose wire box)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required i) 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required i) 3 pin 5/6 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Supplying and fixing pvc battern/angle holder including connection etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral sheet steel MCB distribution board 415 volt on surface/recess complete with tinned copper bus bar, netural bus bar earth bar din bar interconnection powder painted including earthing etc .as required. (make like :Havells or similar make of the manufacturer having their service centre in Jammu.) i) 4 way, (4+12 Way) For Barrack & Kitchen portion

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (make like :Havells or similar make of the manufacturer having their service centre in Jammu.) i) 6 way, Double door (for toilet block)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i)Single pole (make like :Havells or similar make of the manufacturer having their service centre in Jammu.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i) Double pole 32 Amp (make like :Havells or similar make of the manufacturer having their service centre in Jammu.)

Supplying and fixing following rating four pole 415 V isolator in the existing MCB DB complete with connection testing and commissioning etc as required. i) 63 Amp

Earthing with GI earth pipe 4.5 metre long x 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For Vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing & fixing of the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Make Havells -BLDC color Pearl White or similar make of the manufacturer having their service centre in Jammu)

Dismantling of exsiting wiring, conduit, tube lights , exhaust fans, celing fans,switch board & panel and making good the damage plastering of holes paintined finishing work complete etc as required .

Providing and installation of 24/25 Watt LED 6500 K Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack and tube etc directly on ceiling/wall, including connection with 1.5 sq mm FRLS PVC insulated copper conductor, Single core cable and earthing etc as required (Make Like Havells HIGH WATTAGE (PC BATTENS) ) Batten code -LHEXAWP7IN1W025 or similar make of the manufacture having their service centre in Jammu)

Providing and installation of 20 Watt 6500 K The smart, contemporary design of mirror light - Austra which makes it a perfect fit for any kind of architecture. The design is a harmonious blend of curves and angles. energy efficient ready to use pack complete with all accessories and tube etc directly on ceiling/wall, including connection with 1.5 sq mm FRLS PVC insulated copper conductor, Single core cable and earthing etc as required (Make Like Havells AUSTRA MIRROR LIGHT 20 W code - LHLDESAARANC020 or similar make of the manufacture having their service centre in Jammu)

Supplying and installation of 1 phase exhaust fan of 300 mm sweep, min 1400 rpm, air delivery min 1950 Cubic meter /hour, double ball bearing Rough proof body and blade, in the existing opening, including making good the damage, connection, testing, commissioning i/c nut bolt supporting clamp, connecting wire etc as required (Make Havells -Vential Air DSP 1P GREEN Code FHVVEMTDBS12 or similar make of the manufacturer having their service centre in Jammu) ( For toliet Block)

Supplying and installation of 1 phase Heavy duty exhaust fan of 450 mm sweep, min 1400 rpm, air delivery min 1950 Cubic meter /hour, double ball bearing Rough proof body and blade, in the existing opening, including making good the damage, connection, testing, commissioning i/c nut bolt supporting clamp, connecting wire etc as required (Make Havells -Turbo force Neo 1P Grey Code FHEHDSPGRY18 or similar make of the manufacturer having their service centre in Jammu) (For Kitchen & dinning Hall)

Providing and fixing of energy efficient 09/10 Watt LED bulb suitable for PVC batten/ angle holder etc. as required. (Model- Havells/CG/Phillips/bajaj/Syska)

Providing, laying & fixing of G.I. pipe of 40 mm dia (medium duty ) G.I pipe in floor/wall/road for protection of UG cable including cutting the wall/floor/metalled road and making good the same as required. Make Jindal/ TATA

Supplying, Laying & fixing of one number XLPE insulated and PVC sheathed power cable of 1.1 KV grade of 3.5 x 120 sq. mm XLPE insulated and PVC sheathed armored cable aluminium conductor 1.1 KV grade conf. to IS : 7098( Part 1)/ 1988 direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (Make- Havells or Other equivalent Havells, Finolex, Gloster,KEI)

Supplying & laying of one number XLPE insulated and PVC sheathed Armoured power cable of 1.1 KV grade of size 3.5 x 120 sq mm in the existing RCC/ HUME/ METAL pipe as required.(IS:7098 part - I of make Havells / finolex / Gloster/KEI.)

Supplying & laying of one number XLPE insulated and PVC sheathed Armoured power cable of 1.1 KV grade of size 3.5 x 120 sqmm, in the existing masonry open duct as required.(IS:7098 part - I of make Havells / Polycab / finolex / Gloster/KEI)

Providing and fixing of 3 Watt LED bedside warmwhite light directly on wall, including connection with 1.5 sq mm FRLS PVC insulated copper conductor, Single core cable and earthing etc as required (Make Like Philips Base material aluminium Product Dimensions 14 D X 14 W X 37 H or similar make of the manufacture having their service centre in Jammu)

Providing,installation and testing of 415 V,3phase,4 wire ,50 Hz A.C. indoor floor/wall mounted (on a base frame) comparmentalized, totally enclosed, degree of protection IP-42, for indoor application cubical type panel of suitable size withthe following mounting thereon . It shall be fabricated out of 2 mm thick CRCA sheet, frame work may be angle iron/chanel type construction ( Where ever necessary) and complete with higned doors having locking arrangement and providing detachable gland plate at the botom of the panel. Complete with inter connections, 200 amps 4 Nos Aluminium bus bar, 2 nos 20x3 copper strip for earth conductors, cable alleys & having provision for future extension, connections ,suitable rating inter connections, earthing, testing and commissioning, ete as required . The panal shall be painted / finished with powder coating in Siemens Grey Shade RAL 7032 and supplied with base channel and suitable pedestal of 50 mm x 50 mm x 6 mm angle iron frame. (minimum size of panel 1500 mm x 1200 mm x 300 mm ).( MAKE CPRI APPROVED PANEL BUILDER) INCOMMING i) 200 Amp FP MCCB 36 KA, - 2 No. ( Havells- IHLLSEB40200 /L&T DH series /equivalent of Siemens/ABB/C&S/Schneider make) OUTGOINGS i) 125 Amp FP MCCB 36 KA, - 05 Nos IHA13EB40125 (Havells/ L&T DH Series/ Siemens/ABB/C&S/Schneider make ). ii)63 Amp four pole isolator DHM ZIFPX063 (Havells/ L&T Siemens/ABB/C&S/Schneider make )- 3 Nos iii) 3 Phase Voltage,Current, Frequency (Make :- L & T/C&S) -01 set iv) CTs 200/5A, CL-1, 15 VA, Cast Resin for metering - 3 Nos. (Make:- AE ) v) LED Phase indicator light