Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Eprocure
Opening Date7 Nov 2024
Closing Date13 Nov 2024
Tender Amount₹ 1,05,54,897
Costs
EMD
₹ 2,11,100Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Phc Level-ii At Sataun, Tehsil Kamrau, District Sirmour ( Hp )
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_94982_1Bid Award Id
ViewTender No
NIT-6027-6126dt4-11-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing and laying in position cement concrete of specified grade mechanically mixed and curing complete excluding the cost of centering and shuttering - All work up to plinth level and all floor level in 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40mm (forty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
38.15
4960
189254.52
Providing and laying in position cement concrete of specified grade mechanically mixed and curing complete excluding the cost of centering and shuttering - All work up to plinth level and all floor level in 1:5:10 (One Cement : five coarse sand : ten graded stone aggregate 40mm (forty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
9.2
4570
42049.52
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) mechanically mixed and vibrating curing complete including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor all level, excluding the cost of centering, shuttering and finishingin 1:1.5: 3 (one cement : One and half coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
0.99
8433
8348.77
Making plinth protection 50 mm ( fifty milimetre ) thick of cement concrete 1 : 3 : 6 ( One cement : three coarse sand : six graded stone aggregate 20 mm ( twenty milimetre ) nominal size ) over 75 mm ( seventy five milimetre ) thick bed of dry brick ballast 40 mm ( forty milimetre ) nominal size, well rammed & consolidated & grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
40.28
563
22705.84
Providing and laying in position cement concrete of specified grade mechanically mixed , vibrated & curing complete excluding the cost of centering, shuttering, finishing & reinforcement - All work up to plinth level and all floor level in 1:1.5 : 3 (One Cement : One & half coarse sand : five graded stone aggregate 20mm (twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
23.15
7557
174963.07
Providing and laying reinforced cement concrete work in walls (any thickness), mechanically mixed, vibrated and curing complete including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor all level , excluding cost of centering, shuttering, finishing and reinforcement in 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
12.41
8901
110470.1
Providing and laying reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level mechanically mixed, vibrated and curing complete, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
66.25
9366
620540.56
Providing form work with steel plates 3.15mm ( three point fifteen millimeter ) thick welded with angle iron in frame 30X 30X5mm ( thirty X thirty X five millimeter ) so as to give a fair finish including centering ,shuttering, strutting and propping etc. with wooden battens and ballies , height of propping and centering below supporting floor to ceiling not exceeding 4.00 meters ( four meters ) and removal of the same for insitu- reinfoced concrete and plain concrete work including all leads and lifts of materials or as per the directions of Engineer in Charge. Foundations, footings, bases of columns, etc. for mass concrete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
72.82
231
16821.42
Suspended floors, roofs, landings, balconies and access platform including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
229.3
604
138680.64
Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
238.02
491
117022.53
Columns, Pillars, Piers, Abutments, Posts and Struts Circular including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
205.44
574
118015.01
Stairs, (excluding landings) except spiral stair cases including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
8.13
517
4208.09
Edges of slabs and breaks in floors and walls Under 20cm ( twenty centimeter ) wide including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
95.4
127
12201.66
Providing and placing steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor all level. Thermo-Mechanically Treated bars of grade Fe-500 D or more including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
21546.7
105
2278563.53
Rat trap bond brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth in all shapes and sizes in Cement mortar 1 : 6 ( One cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
14.38
6289
90445.89
Rat trap bond brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in Cement mortar 1 : 6 (one cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
20.58
7508
154524.93
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth in all shapes and sizes in Cement mortar 1 : 6 ( One cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
96.87
7428
719623.01
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in Cement mortar 1 : 6 (one cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
0.61
8647
5275.01
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1 :4 ( One cement : four coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
58.21
919
53503.72
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes : Cement mortar 1 : 4 ( One cement : four coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
148
1059
156828.2
Providing & fixing 18 mm ( eighteen milimetre ) thick gang saw cut, mirror polished, premoulded & prepolished, machine cut for kitchen plateforms,vanity counters, window sills, facias & similar locations of required size, approved shade, colour & texture laid over 20 mm ( twenty milimetre ) thick base cement mortar 1 : 4 ( One cement : four coarse sand ), joints treated withwhite cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, coulding & polishing to edges to give high glass finish etc. complete at all level Granite of any colour, shade & all area of slab including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
10.97
3998
43864.09
Providing and fixing first quality Ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacture ), of approved make, in all colours, shades, except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge in Skirting, risers of steps & dado over 12 mm ( twenty millimeter ) thick bed of cement mortar 1:3 (one Cement : three Coarse sand) and jointed with grey cement slurry @ 3.3kg/ sq.m (three point three zero kilograme per square meter ) including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
122.9
905
111285.95
Providing & fixing ISI marked flush door shutters conforming to IS : 2202 ( Part-I ) decorative type, core of block board construction with frame of first class hard wood & well matched teak three ply veneering with vertical grains or cross bands & face veneers on both faces of shutters 35 mm ( thirty five milimetre ) thick including ISI marked stainless steel butt hinges with necessary screws including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
40.58
3217
130570.21
Providing & fixing wire gauge shutters using galvanised mild steel gauge of average width of aperture 1.4 mm ( one point four milimetre ) in both directions with wire of dia 0.63 mm ( zero point six three milimetre ) for doors, windows & clerestory windows with hinges & necessary screws 35 mm ( thirty five milimetre ) thick shutters Kiln seasoned & chemically treated hallack wood including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
32.9
2981
98086.42
Providing & fixing wooden moulded beading to door & windows frames with iron screws, plugs & priming coat on unexposed surface etc. complete second class teak wood 50 x 12 mm ( fifty into twelve milimetre ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
88.9
182
16228.7
Providing and fixing mild steel grills of required pattern in frames of steel windows etc. with mild steel flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
858.33
171
147546.93
Providing & fixing Cub board shutters 19 mm ( nineteen milimetre ) thick with pre-laminated flat pressed three layers particle board or graded wood particle board IS: 12823 marked exterior grade ( Grade I type II ) , having one side decorative lamination & other side balancing lamination, including second class teak wood lipping of 25 mm wide 12 mm thick ( twenty five milimetre wide twelve milimetre ) thick ) with necessary screws & bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
17.85
1763
31484.72
Providing & fixing decorative high pressure laminated sheet of plain/ wood grain in gloss /matt/ Suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type-S, including cost of adhesive of approved quality 1.00mm ( One milimetre ) thick sheet including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
17.85
679
12137.11
Providing & fixing 19 mm ( Nineteen milimetre ) thick water proof commercial board in shelves/box for Cub board with butt joints & fixing with nails & screws etc. complete, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
13.38
1234
16520.96
Providing & fixing ply wood 4 mm ( four milimetre ) thick, one side decorative veneer conforming to IS: 1328 (Type-1 ), for plain lining/ cladding with necessary screws, including priming coat on unexposed surface with decorative veneer facing of approved manufacture including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
17.85
1110
19822.43
Providing & fixing special quality bright finished brass cub board or ward robe locks with four levers of approved quality including necessary screws etc. complete 50 mm ( fifty milimetre ) size, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
6
286
1717.8
Providing & fixing 50mm ( fifty milimetre ) bright finished brass cub board or ward robe knob of approved quality with necessary screws, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
9
63
569.7
Providing & fixing magetic catcher of approved quality in Cub board/ ward robe shutters, including fixing with necessary screws etc. complete double trip ( horizontal type ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
6
35
213.3
Providing & fixing expandable fasterners of specified size with necessary plastic sleeves & galvanised mild steel screws including drilling holes in masonry work/ cement concrete/ reinforced cement concrete & making good etc. complete 40 mm long, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
18
19
358.2
Providing & fixing aluminium sliding door bolts, ISI marked anodised ( Anodic coating not less than grade AC 10 as per IS:1868 ), transparent or dyed colour to required colour or shade, with nuts & screws etc. complete 300 x 16 mm ( three hundred into sixteen milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
16
264
4236.8
Providing & fixing aluminium sliding door bolts, ISI marked anodised ( Anodic coating not less than grade AC 10 as per IS:1868 ), transparent or dyed colour to required colour or shade, with nuts & screws etc. complete 250 x 16 mm ( two hundred fifty into sixteen milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
5
236
1181.75
Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200 x 10 mm ( two hundred into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
51
91
4653.75
Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 x 10 mm ( One hundred into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
10
79
798.5
Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm ( one hundred twentyfive milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
49
60
2952.25
Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm ( one hundred twenty five milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
10
52
528
Providing & fixing aluminium hanging floor stopper ISI marked anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Single rubber stopper including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
5
34
170.25
Providing & fixing aluminium hanging floor stopper ISI marked anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Twin rubber stopper including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
34
63
2172.6
Providing & fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand ) logo with ISI, IS:3564, embossed on the body, door weight upto 35Kg ( Thirty five kilogram ) door with upto 700mm ( seven hundred milimetre ) with necessary accessories & screws etc. complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
5
1048
5244
Providing & fixing ISI marked oxidised mild steel tower bolts black finish ( barrel type ) with necessary screws etc. complete 100 x 10 mm ( One hundred into ten milimeter ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
212
42
9020.6
Providing & fixing ISI marked oxidised mild steel handles conforming to IS : 4992 with necessary screws etc. complete 100 mm ( One hundred milimeter ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
58
29
1705.2
Structural steel work riveted, bolted or welded in built up sections, trusses & framed work,including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
4997.5
119
597201.25
Providing & fixing mild steel round holding down bolts with nuts & washers plates complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
50
97
4885
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bars, ladders, railing, brackets, gates & similar work including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
970.63
152
147972.54
Providing & fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing & similar work, including applying priming coat of approved steel primer mild steel tube/ pipe including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
24.15
154
3737.21
Providing & fixing fly proof wire gauge to windows, clerestory windows & door with mild steel flat 15 x 3 mm ( fifteen into three milimetre ) & nuts & bolts complete. Galvanised mild steel wire gauge with 0.63 mm ( zero point six three milimetre ) dia wire & 1.4 mm ( One point four milimetre ) aperture on both sides including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
54.98
1402
77090.21
Providing & fixing factory made ISI marked steel glazed doors, windows & ventilators, side/ top/ centre hung, with beading & all member such as F7D, F4B, K11B & K12B etc. complete of standard rolled steel sections, joints mitred & flash butt welded & sash bars tenoned & riveted, including providing & fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings complete all as per approved design ( Sectional weight of only member shall be measured for payment ) fixing with 15 x 3 mm ( fifteen into three milimetre ) lugs 10cm ( ten centimetre ) long embedded in cement concrete block 15 x 10 x 10 cm ( fifteen into ten into ten centimetre ) of cement concrete 1 : 3 : 6 ( One cement: three coarse sand : six graded stone aggregate 20 mm ( twenty milimetre ) nominal size ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
314.02
160
50306
Providing & fixing mild steel Tubular frames for doors, windows, ventilators & cub board with rectangular/L- type sections made of 1.60 mm ( One point six zero milimetre ) thick mild steel sheet, joints mitred welded & grinded finish, with profile of required size, including fixing of necessary butt hinges & screws & applying a priming coat of approved steelprimer. Fixing with 15 x 3 mm ( fifteen into three milimetre ) lugs 10cm ( ten centimetre ) long embedded in cement concrete block 15 x 10 x 10 cm ( fifteen into ten into ten centimetre ) of cement concrete 1 : 3 : 6 ( One cement: three coarse sand : six graded stone aggregate 20 mm ( twenty milimetre ) nominal size ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
2199.27
148
326701.56
Providing & fixing glass panes with putty & glazing clips in steel doors, windows, clerestory windows all complete with 4 mm ( four milimetre ) thick glass panes including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
54.98
794
43687.11
Cement concrete flooring 1 : 2 : 4 ( One cement : two coarse sand : four graded stone aggregate ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm ( forty milimetre ) thick with 20mm ( twenty milimetre ) nominal size ) stone aggregate including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
16.09
462
7446.45
Automatic Vibro hydraulically compressed 20 mm ( twenty milimeter ) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm ( twenty five milimeter ) average thickness of cement mortar 1:6 ( one cement : six sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles ( Wherever required ) including rubbing and polishing complete with tiles of following shades sliver grey as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge .
122.64
1647
202067.8
Automatic Vibro hydraulically compressed 20 mm ( twenty milimeter ) thick with ( marble chips of specified sizes ) in skirting & risers of steps not exceeding 30 cm ( thirty centimeter ) in height on 10 mm ( ten milimeter ) thick cement mortar 1:3 ( one cement : three sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles ( Wherever required ) including rubbing and polishing complete with tiles of following shades sliver grey as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge .
12.13
1830
22205.18
Providing & laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shades, laid on 20 mm ( twenty milimetre ) thick cement mortar 1 : 4 ( One cement : four coarse sand ), jointing with grey cement slurry @ 3.3 Kilogram per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 300 x 300 mm, including all leads, lifts, & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
24.56
1301
31964.84
Providing & laying vitrified double charge floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shades, laid on 20 mm ( twenty milimetre ) thick cement mortar 1 : 4 ( One cement : four coarse sand ), jointing with grey cement slurry @ 3.3 Kilogram per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 600 x 600 mm, including all leads, lifts, & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
34.69
1469
50971.75
Providing & laying vitrified double charge floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm ( twelve milimetre ) thick bed of cement mortar 1 : 3 ( One cement : three coarse sand ), jointing with grey cement slurry @ 3.3 Kilogram per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 600 x 600 mm, including all leads, lifts, & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
3.31
1518
5025.08
Mirror polished Kotah stone slab flooring over 20 mm ( twenty milimetre ) ( average ) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing & polishing complete with base of cement mortar 1 : 4 ( one cement : four coarse sand ) 19 mm ( ninteen milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
50.48
1437
72570.05
Mirror polished Kotah stone slab 20 mm ( twenty milimetre ) thick in risers of steps, skirting, dado & pillars laid on 12 mm ( twelve milimetre ) ( average ) thick cement mortar 1 : 3 ( One cement : three coarse sand ) & jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing & polishing complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
7.2
1561
11239.92
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 110mm ( One hundred ten millimeter ) diameter metre.
38.7
439
17014.46
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 110mm ( eighty seven point five degree one hundred ten millimeter ) bend.
18
177
3201.3
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Shoe ( Plain )110mm ( One hundred ten millimeter ) shoe., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
12
142
1707
Providing & fixing mild steel holder bat clamps of approved design to cast iron or S.C.I. rain water pipes embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1 : 2 : 4 mix ( One cement : two coarse sand : four graded stone aggregate 20 mm nominal size ) & cost of cutting holes & making good the wall etc. 110 mm ( One hundred ten milmetre ) diameter PVC pipe including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
18
248
4473
Providing & fixing 0.60 mm ( sixty milimetre ) thick prepainted steel sheet of TATA Dora shinein roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting to back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm ( six milimetre ) dia metre with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
182.66
1285
234754.63
Providing & fixing ridge or hips 0.45 cm ( forty five centimetre ) over all with thick prepainted steel sheet of TATA Dora Shine in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting plus back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm ( six milimetre ) dia and prepainted G.I. limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
16.6
727
12069.86
Providing & fixing 30 cm ( thirty centimetre ) wide 120 cm ( one hundred twenty centimetre ) overall Box type prepainted Zinc coated sheet gutter with iron bracket 40 x 3 mm ( forty into three milimetre ) size, bolts & nuts and washers etc. including making necessary connections with rain water pipes complete as per design. 0.45 mm ( forty five milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
52.5
960
50418.38
Providing & fixing mild steel B.P. sheet 1.66 mm to 2 mm ( One point six six milimetre to two milimetre ) thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing & welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge ( Base member of steel work shall be measured & paid for separately ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
15.75
1931
30417.98
Providing corrugated galvanised steel sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts & nuts 8 mm diametre with bitumen & galvanised iron limpet washers or with galvanised iron limpet washers filled with white lead, including a coat of approved steel primer & two coats of approved paint on over lapping or sheets complete ( upto any pitch in horizontal/vertical or curved surfaces ), excluding the cost of purlins, rafters & trusses & including cutting to size and shape wherever required 0.63 mm ( Zero point six three milimetre ) thick with zinc coating not less than 275 gram ( Two hundred seventy five kilogram ) per square metre, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
17.24
1005
17327.06
15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1 : 4 ( one cement : four fine sand ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
40.64
282
11474.7
15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1 : 6 ( one cement : six fine sand ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1625.7
260
423576.14
6mm ( six millimeter ) cement plaster of mix 1 : 4 ( one cement : four fine sand ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
204.97
205
42018.85
Providing & applying plaster of paris putty of 2 mm ( two milimetre ) thickness over plastered surface to prepare the surface even & smooth complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1067.64
100
107297.82
Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade new work ( two or more coats ) over and including water thinnable priming coat with cement primer including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
759.97
120
91576.39
Finishing walls with Acrylic smooth exterior paint with of required shade new work ( two or more coat ) applied @ 1.67 litre/10 Sqmt ( one point six seven litre per ten square metres ) over & including priming coat of exterior primer applied @ 2.20 Kg /10 Sqmt ( at the rate two point two zero kilograme per ten square metre ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
913.62
137
125577.07
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications,two or more coats applied on walls @ 1.25 ltr/ 10sqm( One point two five litre per ten square meter ) over an under coat including one coat of special primer applied @ 0.75 ltr/ 10sqm( zero point seven five litre per ten square meter ) of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
38.08
125
4775.23
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10sqm( zero point nine zero litre per ten square meter ) over an under coat of primer applied @ 0.80 ltr/ 10sqm( zero point eight zero litre per ten square meter ) of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
262.22
108
28424.65
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm ( one hundred millimeter ) sand cast Iron P or S trap, 10 litre ( ten litre ) low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge: White Vitreous china Orissa pattern W.C. pan of size 580mm x 440mm ( five hundred eighty millimetre X four hundred forty millimeter ) with integral type foot rests., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
1
4540
4540.5
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10litre ( ten litre )low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- W.C. pan with ISI marked white solid plastic seat and lid., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
3
4967
14901.9
Providing & fixing white Vitreous China flat back half stall urinal of size 630x420x390 mm with ( Six hundred thirty into four hundred twenty into three hundred ninety milimetre ) white PVC auotmatic flusing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with union & clamps ( all in C.P. brass ) with waste fitting as per IS : 2556, C.I. trap with out let grating & other couplings in C.P. brass, including painting of fittings & cutting & making good the walls & floors wherever required Range of single half stall Urinals with 5 litre P.V.C. automatic flushing cistern, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
1
9588
9588.1
Providing & fixing wash basin with C.I. brackets, 15 mm ( fifteen milimetre ) C.P. brass pillar taps, 32 mm ( thirty two milimetre ) C.P. brass waste of standard pattern, including painting of fittings & brackets, cutting & making good the walls wherever require White Vitreous China Wash basin size 550 x 400 mm ( Five hundred fifty into four hundred milimetre ) with single 15 mm ( fifteen milimetre ) C.P. Brass pillar tap, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
4
3043
12172
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
2
1422
2845.3
Providing & fixing stainless steel A ISI 304 ( 18/8 ) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings & brackets, cutting & making good the walls wherever required kitchen sink with drain board 460 x 385mm ( Four hundred sixty into three hundred eighty five milimetre ) bowl depth 200 mm ( Two hundred milimetre ) , including all leads, lifts, & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
2
2653
5306.1
Providing & fixing white Vitreous China Laboratory sink with Cast iron bracket, C.P. brass chain rubber plug, 40 mm ( forty milimetre ) C.P. brass waste & 40 mm ( forty milimetre ) C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings & brackets, cutting & making good the wall wherever required 600x450x200mm ( Six hundred into four hundred fifty into two hundred milimetre ) in size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
2
5565
11130.4
Providing and fixing 600mm x 450mm ( Six hundred millimeter into four hundred fifty millimeter ) beveled edge mirror of superior glass (of approved quality) complete with 6mm ( six milimetre ) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
7
1198
8387.05
Providing and fixing 600mm x 120mm x 5mm ( Six hundred millimeter into one hundred twenty millimeter into five millimeter ) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm ( forty millimeter ) long screws, rawl plugs etc., complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
7
825
5780.95
Providing and fixing C.P. brass toilet paper holder complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
4
587
2348.4
Providing and fixing PTMT liquid soap container 109mm ( one hundred nine millimeter ) wide, 125mm( one hundred twenty five millimeter ) high and 112mm( one hundred twelve millimeter ) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms ( one hundred five grams ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
4
184
739.8
Providuing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour, 450 mm ( Four hundred fifty milimetre ) long towel rail with total length of 495 mm, 78 mm ( Four hundred ninety five milimeter, seventy eight milimetre ) wide & effective height of 88 mm ( eighty eight milimetre ) , weighting not less than 170 ( One hundred seventy ) grams including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
7
525
3676.4
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 1216 (16 mm ( sixteen millimeter ) OD) pipe., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
59
409
24151.65
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:-1620 (20mm ( twenty millimeter ) OD) pipe., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
35
452
15851.5
Providing and fixing G.I. pipes complete with G.I. fittings & Clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work:-15mm ( fifteen millimeter ) dia nominal bore., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
25
435
10895
Providing and fixing G.I. pipes complete with G.I. fittings including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work :- 20mm ( twenty millimetre ) dia., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
75
507
38040
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.External work:-15mm ( fifteen millimeter ) dia nominal bore., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
40
256
10246
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 25 mm to 40mm ( twenty five millimeter to forty millimeter ) nominal bore., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
1
648
648.9
Fixing water meter & stop cock in G.I. pipe line including cutting & threading the pipe & making long screws etc. complete ( Cost of water meter & stop cock to be paid separately ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
1
563
563.55
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
4000
9
38600
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore ., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
30
569
17071.5
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standard & weighting not less than 690 grams ( six hundred ninety grams ) 15 mm ( fifteen milimetre ) nominal size, including all leads,lifts,carriage of materials & entire satisfaction of the Engineer-in Charge
7
675
4730.25
Providing and fixing C.P. brass stop cock ( Concealed ) of standard design & of approved make conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore ., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
8
718
5747.6
Providing and fixing C.P. brass angle valve for basin mixer & geyser point of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore ., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
15
654
9816
Providing & fixing C.P. brass extension nipple ( size 15 mm x 50 mm ( fifteen milimetre into fifty milimetre ) of approved make & quality as per direction of Engineer-in-Charge including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
15
53
800.25
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20mm ( twenty millimeter ) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40mm ( forty millimeter ) nominal size), inside plastering 12mm ( twelve millimeter ) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20mm ( twenty millimeter ) nominal size) finished with a floating coat of neat cement complete as per standard design complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. : Inside size 90cm x 80cm and 45cm ( Ninety centimeter into eighty centimeter and forty five centimeter ) deep including C.I. cover with frame (medium duty) 455 x 610 mm ( Four hundred fifty five into Six hundred ten millimeter ) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram ) (weight of cover 23 kg ( twenty three kilogram ) and weight of frame 15 kg( fifteen kilogram ) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
5
11943
59715.5
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia, including all leads,lifts & carriage of including fixing with approved adhesive etc. complete 150 mm dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
45
502
22617
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia, including all leads,lifts & carriage of including fixing with approved adhesive etc. complete 110 mm dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
30
367
11031
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia, including all leads,lifts & carriage of including fixing with approved adhesive etc. complete 110 mm dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
271
5421
Providing & fixing PVC door bend with oval access door insertion rubber washers 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete.150 mm ( One hundred fifty milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
263
5264
Providing & fixing PVC door bend with oval access door insertion rubber washers 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete.110 mm ( One hundred ten milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
234
3521.25
Providing & fixing PVC door bend with oval access door insertion rubber washers 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete.75 mm ( Seventy five milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
206
2063
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc.complete including fixing with approved adhesive etc. complete.110 mm ( One hundred ten milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
138
2760
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc.complete including fixing with approved adhesive etc. complete.110 mm ( One hundred ten milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
116
1749.75
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc.complete including fixing with approved adhesive etc. complete.75 mm ( Seventy five milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
95
953
Providing & fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete including fixing with approved adhesive etc. complete.150 mm ( One hundred fifty milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
130
2618
Providing & fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete including fixing with approved adhesive etc. complete.110 mm ( One hundred ten milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
109
1643.25
Providing & fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete including fixing with approved adhesive etc. complete.75 mm ( Seventy five milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
95
953
Providing & fixing PVC double equal branch with oval access door insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete.including fixing with approved adhesive etc. complete.150 mm ( One hundred fifty milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
635
6359
Providing & fixing PVC double equal branch with oval access door insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete.including fixing with approved adhesive etc. complete.110 mm ( One hundred ten milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
8
493
3949.2
Providing & fixing PVC double equal branch with oval access door insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete.including fixing with approved adhesive etc.75 mm ( Seventy five milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
5
401
2006
Providing & fixing PVC clamps ISI marked including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
109
2738.75
Providing & fixing PVC clamps ISI marked including fixing with approved adhesive etc. complete110 mm ( One hundred ten milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
88
1764
Providing & fixing PVC clamps ISI marked including fixing with approved adhesive etc. complete75 mm ( Seventy five milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
74
740
Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 150 mm x 110 mm dia ( One hundred fifty milimetre inti one hundred ten milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
156
1565
Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete. 110 mm x 75 mm ( One hundred ten milimetre into seventy five milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
5
135
675.75
Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc. complete.110 mm x 90 mm dia ( One hundred ten milimetre into ninety milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
1053
10537.5
Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete. 110 mm x 75 mm ( One hundred ten milimetre into seventy five milimetre ) dia, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
5
1018
5091
Providing & fixing 15 mm mixer for kitchen sink with top/ bottom swining spouts, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
4
2183
8735
Cutting holes to 30 x 30 cm in walls including making good the same with common burnt clay F.P.S. ( Non modular ) bricks, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
125
316
39556.25
Providing & fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1.00 metre long with S.S.triangular plate to Eureopean type W.C. of quality & make as approved by Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
4
320
1280.4
Providing & fixing in position precast reinforcement coment concrete manhole cover & frame of required shape & approved quality LD- 2.5 ( Two point five ) rectangular shape 600 x 450 mm ( six hundred into four hundred fifty milimetre ) internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
4
1296
5187.4
Providing & fixing in position precast reinforcement coment concrete manhole cover & frame of required shape & approved quality LD- 2.5 ( Two point five ) square shape 450 mm ( four hundred fifty milimetre ) internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
12
1104
13251
Supplying & filling brick bats in dispension trenches ( Brick aggregate ( Single size ) 50 mm ( Fifty milimetre ) nominal size ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
5.57
718
4001.77
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 75 mm ( Seventy five millimeter ) diameter metre., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
35.1
273
9589.32
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 75 mm ( eighty seven point five degree Seventy five millimeter ) bend., including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
2
120
241.8
Random rubble masonry with hard stone in foundation & plinth including levelling up with cement concrete 1 : 6 : 12 ( One cement : six coarse sand : tweve graded stone aggregate 20 mm ( twenty milimetre ) nominal size upto plinth level with cement mortar 1 : 6 ( One cement : six coarse sand ), including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.
52.64
5164
271856.65
Providing & laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm ( fifty milimetre ) thickcompacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand & cutting of paver block as per required size & pattern, finishing & sweeping extra sand, complete all as per direction of Engineer-in-Charge, 60 mm ( Sixty milimetre ) thick cement concrete paver block of M-30 grade with approved colour design & pattern, including all leads, lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge
1087.5
984
1070535
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements