Military Engineer Services Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 Jul 2024
Closing Date13 Sep 2024
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_667293_1Bid Award Id
ViewTender No
GE/Y-31/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
0.63mm thick plain galvainsed mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.
15
-
-
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
180
-
-
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
15
-
-
Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.410 Gde E-250, steel work, complete all as specified and directed.
900
-
-
Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. conforming to grade Fe.410-W.Gde-E-250 quality A, steel work, complete all as specified and directed.
700
-
-
Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and directed.
0.15
-
-
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section, complete all as specified and directed.
60
-
-
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, complete all as specified and directed.
355
-
-
Providing and fixing in position PVC paneling/planks in ceiling at all heights with PVC wall panel/sheets (5-9mm thickness) of approved texture, design and patterns, using suitable formwork comprising of a frame made in the ceiling offsets from especially fabricated galvanized mild steel sheet and PVC wall panel/sheets of noncombustible are to be screw fixed with self-tapping pan head nickel coated mild steel screws to grid as per direction of Engineer-in-Charge. Note: All fittings including PVC Strips/adhesives or any other are included in this item.
35
-
-
Providing and fixing in position wall paneling at all heights with PVC wall panel/sheets (5-9mm thickness) of approved texture, design and patterns, comprising of a frame made in the wall offsets from especially fabricated galvanized mild steel sheet and PVC wall panel/sheets of noncombustible are to be screw fixed with self-tapping pan head nickel coated mild steel screws as per direction of Engineer-in-Charge. Note: All fittings including PVC Strips like L,U etc fixed at corner edges, adhesives or any other are included in this item.
70
-
-
S & F for false ceiling of 600mmx 600mmx 4mm thick Non asbestos fibre cement building boards (designed prepainted) fixed or laid/ inserted to timber/GI/Aluminium framework with screws (E-boards) manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process conforming IS-14862, of size 605mmx 605mmx 4mm thick fixed over and including anodised powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main and cross members) of size 25mmx 25mmx 1.5mm thick in square pattern of grid size 600mmx600mm. The aluminium frame work will supported on side wall with the used of aluminium L section of size 25mm x25mmx 1.5mm thick angles etc. snap grid shall be supported with hangers of 4mm dia galvanised iron wire adjusting level fixed to roof roof slabs/trusses etc. by means of ceiling cleats made out of galvanised iron flat of size 40x3mm of size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete all as specified and directed. Make:- Everest or equivalent as approved by GE.
250
-
-
Dismantling boarding, any description (wall panelling/ceiling/lining/ cladding/partition etc), fixed in any position with screws/nails, complete all as specified and directed.
80
-
-
18/19mm thick block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work, complete all as specified and directed.
80
-
-
2nd class hard wood as in timber scantling wrought fixed for framed work, complete all as specified and directed.
0.15
-
-
Applying two coats of creosote oil on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed.
12
-
-
Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, complete all as specified and directed.
30
-
-
Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, complete all as specified and directed.
65
-
-
Taking down shutters of any description not exc. 1 Sqm each and removing from site, complete all as specified and directed.
5
-
-
Taking down shutters of any description exc. 1 Sqm not exc. 2 Sqm each and removing from site, complete all as specified and directed.
25
-
-
2nd cla hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as as specified and directed.
0.25
-
-
Pressed steel frames of size 105x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed.
15
-
-
Pressed steel frames of size 125x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed.
20
-
-
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) door shutter with frame, partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150mm size, aluminium barrel tower bolt 200mm size, including hydrolic door closer etc all as specified below complete all as specified and directed. (a) Frame ( top & side) section shall of size 101.60 x 44.75 x 2.4mm (Section No 14021). (b) Vertical Members of shutter section shall be of size 85.00x44.45x2.00mm (section No 19560). (c) Top Members of shutter Section shall be of size 83.50 x 44.45 x 2.00mm (section No 19581). (d) Lock rail (Middle member) of shutter section shall be of size 150.00x44.45x3.00mm (section No 19596). (e) Bottom Members of shutter section shall be of size 150.00x44.45x3.10mm (section No 19584). (f) Glazing clip for securing glass of shutters shall be of 0.80mm thick (section No 19370). Note:- (i) Section No given above are of make jindal, contractor may use similar section of other make mention in Appx 'C'.
9
-
-
Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all specified and as directed by Engr-in-charge.
1.1
-
-
S & F aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50mmx 38.00mmx 1.50mm thick (Cat No 20036), half portion glazed with 4mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80mm wide & 4mm thick frosted glass including aluminium louver patti incluidng S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position complete. Note:-(i) Section No given above are of Make-Jindal, contractor may use similar section of other make mention in Appx 'C'
1.1
-
-
Taking down aluminium door shutter n. exc 2 Sqm each, taking out servicable glass panes, hydraulic door clocer, but hinges, double action hydraulically regulated floor spring and other fittings, if required carefull and refixing in the same opening after repairs of unserviceable or loosened joints/cleats of top rail/bottom rails/lock rails and styles etc and fixing old serviceable glass, any thickness with rubber packing and aluminium beadings, fixing of old servicable hydraulic door closer, double action door spring duly oiling/greasing and fixing all servicable fitting complete all as directed by Engr-in-Charge.
NOTE;- Unservicable door closer, double action floor spring, glass panes and other fittings etc shall be replaced and paid under separate items of schedule.
20
-
-
Sheet glass 5.5mm thick ordinary quality and glazing with glazing clips, ruber neoprene packing, aluminium beads in squares, not exc. 0.5sqm in each pane, complete all as specified and directed.
5
-
-
Mortice lock, brass, vertical type, size 100 mm, 4 lever, fixed into aluminium door shutter, fixed in repair, complete all as specified and directed.
5
-
-
Aluminium (diecast) body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified and directed.
25
-
-
Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair, complete all as specified and directed.
5
-
-
Factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled 35mm thick shutters without interlocking rail and with one panel and panels of 9mm BWP commercial plywood or 12mm veneered particle board with commercial face veneers on both face, timber flat on bolts side (feather edged or veneered particles board medium density wood particles with commercial face veneers etc.).The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as as specified and directed.
42
-
-
Factory made second class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive with sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member as specified in SSR Part I, Section 8 clause 8.24(b), complete all as as specified and directed.
40
-
-
35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified and directed by Engr-In-Charge.
18
-
-
Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as as specified and directed.
385
-
-
Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 180 of MES SSR 2020 Part-II, complete all as as specified and directed.
176
-
-
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as as specified and directed.
54
-
-
Factory made fully glazed PVC (frosted/ground/obscured) window/ventilator shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; completespecified and directed. Note:- Glass gauges inclusive of quoted rates.
1.5
-
-
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm, complete all as specified and directed.
36
-
-
Butt hinges (ISI marked), medium weight, cold rolled, mild steel 100mm long, complete all as specified and directed.
270
-
-
Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 200mm, fixed, complete all as specified and directed.
130
-
-
Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm, fixed, complete all as specified and directed.
140
-
-
Extruded aluminium alloy handles (ISI marked, fabricated type, anodised, of size 125mm, complete all as specified and directed.
140
-
-
Extruded aluminium alloy handles (ISI marked, fabricated type, anodised, of size 100mm, complete all as specified and directed.
180
-
-
Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 100mm, complete all as specified and directed.
30
-
-
Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm with lipping frame to match, complete all as specified and directed.
25
-
-
Mild steel flat iron as in holdfast of size 25x3mm thick of Fe 290 Gde 165, complete all as specified and directed.
18
-
-
M&L for PCC 1:2:4 type B-1 with using 20mm graded stone aggregate as in bed block, bed plates etc. For embedding hold fasts etc. including necessary form work, complete all as specified and directed.
0.2
-
-
Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 60mm x 25mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick required no of each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf. (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) MS work with angle or other section as in window gurad bars, grill. (ix) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 26/13. if iron scrap retrived under this item shall be sold to contractor under Sch of credit.Make : As per Appendix 'C'. Note:- (i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day.
16
-
-
Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165, complete all as specified and directed.
200
-
-
Stainless steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
30
-
-
Small fittings of 2nd class hard wood (SAL) such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including 50mm long, medium weight, cold rolled mild steel butt hinge, articles not exc. 200 cu.cm. each including preparation of articles and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
50
-
-
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, fixed in repair, complete all as specified and directed.
40
-
-
S&F MS prepainted sheet type door spring heavy duty, 200mm long including roller and roller plate, complete all as specified and directed. Make:- Ritff, Everst
20
-
-
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and removing from site, complete all as specified and directed.
15.5
-
-
Sheet glass 3mm thick ordinary quality and glazing with oil putty/aluminium beads in squares, not exc. 0.5sqm in each pane, complete all as specified and directed.
20
-
-
3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane, complete all as specified and directed.
1.5
-
-
Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, complete all as specified and directed.
40
-
-
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches, pillars, including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and directed.
25
-
-
Walling random rubble masonry with best quality locally available stone, uncoursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.
10
-
-
All as per item No. 62 above but except stone.
5
-
-
Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.
10
-
-
Brick work with old size fly ash bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.
25
-
-
Plain cement concrete M-15, nominal mix, B-1 using 20mm graded mechanically crushed stone aggregate as, in lintels upto 1.50 metres clear span cuts, steps seismic and other similar bends, coping, bands plates for serving hold fasts, roof benching, haunching etc. and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.
0.75
-
-
Plain cement concrete M-10 nominal mix, type C-1 using 20mm graded mechanically crushed stone aggregate as in surface channel and drains, complete all as specified and directed.
2.5
-
-
Forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped end etc., complete all as specified and directed.
25
-
-
Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.
1070
-
-
Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on internal fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.
90
-
-
Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.
180
-
-
Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on external fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, mixed with WPC, complete all as specified and directed.
Note : Supply only Water proofing compound shall be measured and paid for seperately.
800
-
-
Rendering plaster 15mm thick in cement mortar 1:6 (1 cement :6 coarse sand) on other than fair faces of brick wall or stone wall surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.
180
-
-
Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over 2mm thick wall care putty, complete all as specified and directed.
90
-
-
Preparation of old decorated plastered or unplastered surfaces including cleaning by brooming down or with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and cleaning oil and greasy spots and applying one coat of oil bound distemper on walls, complete all as specified and directed.
1200
-
-
Two coats of cement base paint on newly plastered surface of ceiling including preparation of surface, complete all as specified and directed.
180
-
-
Two coats of cement base paint on newly plastered surface of wall including preparation of surface, complete all as specified and directed.
400
-
-
Preparation of new plastered surfaces of wall and applying finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed.
400
-
-
Preparation of old plastered or unplastered surfaces of wall including complete removal of existing surfaces and applying finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed.
2000
-
-
Supply only intergal water proofing compound, complete all as specified and directed.
220
-
-
Demolition of cement concrete (unreinforced) in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.
28
-
-
Dismantling stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etc. including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.
3
-
-
Marble 18 to 20mm thick, green marble, (table rubbed and polished and moulding of outer edges) as in kitchen cooking platform /shelf and verticle surfaces duly machine cut in skirting /dado and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade green marble type, complete all as specified and directed.
8
-
-
Granite black 20mm thick (table rubbed and polished) machine cut, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in kitchen platform, window cill /steps laid over and including 15mm thick screed bed in cement mortar (1:6), including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, complete all as specified and directed.
22
-
-
Machine cut kota stone slab flooring 18-20 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 (1 cement : 6 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase, complete all as specified and directed. Note:- Kota stone shall be laid as a single piece in riser, steps, tread or in floors.
50
-
-
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.
100
-
-
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.
90
-
-
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, as in skirting, dado etc . set and jointed in neat cement slurry and includingincluding 10mm thick rendering in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed. including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, complete all as specified and directed.
10
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.
200
-
-
Glazed coloured tiles of size 450x350x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand), including necessary cutting, complete all as specified and directed.
200
-
-
Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in floors, 25mm thick, surface finished even and fair to receive top surface, complete all as specified and directed.
240
-
-
75mm thick Plain cement concrete M-15 nominal mix, B-2, using 40mm graded mechanically crushed stone aggregate as in path/paving/hardstanding and finishing the surfaces broom finish without using extra cement, complete all as specified and directed.
340
-
-
Chequered cement concrete coloured tiles machine pressed of size 20cmx20cmx 25mm thick with grey cement, set jointed & pointed in neat cement slurry mixed with pigment to match the shade of the slab in floors laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
90
-
-
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
250
-
-
Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5cm deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), complete all as specified and directed. Note:- The unit rate include for use of form work (straight or curved).
450
-
-
Demolition of cement concrete (reinforced) of any description and any position not otherwise specifically provided for, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.
2
-
-
Reinforced cement concrete, M-15 (Nominal mix), type B-1, (with 20mm graded crushed stone aggregate as) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including formwork, complete all as specified and directed.
2
-
-
Dismantling wrought iron or mild steel work of any description, complete all as specified and directed.
2
-
-
TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
200
-
-
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. For fair finished flat surfaces of concrete, complete all as specified and directed.
20
-
-
Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.
56
-
-
Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed.
36
-
-
All as per Serial Item No 102 above but except pipe. (Note:- Serviceable pipe retrieved from Serial Item No 101 shall be used).
20
-
-
Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.
43
-
-
Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed.
25
-
-
All as per Serial Item No 105 above but except pipe. (Note:- Serviceable pipe retrieved from Serial Item No 104 shall be used).
18
-
-
Taking up or down 25 to 32mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.
75
-
-
Mild steel galvanized iron water tubing 25mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed.
25
-
-
Mild steel galvanized iron water tubing 32mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed.
50
-
-
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed.
36
-
-
Sink with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia waste pipe & CP waste coupling, overall size 915mm x 460mm bowl size 405mm x 355mm x 178 mm, and fixed in repair, complete all as specified and directed.
3
-
-
Wash basins, Vitreous China (Flat back type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with CP coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed in repair, complete all as specified and directed.
5
-
-
Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15mm bore and fixed in repair, complete all as specified and directed.
25
-
-
Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make: Cat. No.: F280016/Cat. No.: F280020 of "HINDWARE' or F2002511/ F2002405 of "CERA" or Cat No. 8155/9055 of "PRAYAG" or Cat No. TQT-520/521S of "ESSCO" or equivalent makes mentioned in Appx 'C' as directed by Engr-in-Charge.
5
-
-
Angle/stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete all as specified and directed.
45
-
-
Stop valve, cast copper alloy, fancy, type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs, complete all as specified and directed.
5
-
-
Bib taps, fancy type 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, chromium plated screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and directed.
150
-
-
20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair, complete all as specified and directed.. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s /25mm-455gms/ 40mm
- 690 gms)
150
-
-
600mmx450mm bevelled edge looking mirror of selected quality with 6mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repair, complete all as specified and directed.
40
-
-
Supply and fixed in repair PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets including 32mm dia PVC long bend flush pipe 90cm long snd 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixed, complete all as specified and directed.
30
-
-
Supply only Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
30
-
-
Vitreous china permium/1st quality wash down water closet EWC white/ivory/gel gasket etc. including fixing of plastic water closet seat cover, block/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, flushing cistern (excluding flushing cistern and flush pipe) and fixed in repair, complete all as specified and directed.
10
-
-
Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with PVC ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-1 using 20mm graded crushed stone aggregate complete all as specified,including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets with PVC 32mm dia flushing pipe, anti-syphonage pipe, fixed in repair, complete all as specified and directed.
20
-
-
Supply only High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sqcm of 32mm bore, complete all as specified and directed.
60
-
-
Soap dish approximate size 160x 160x90mm, chromium plated, fixed to plugs with chromium plated, brass screws, fixed in repair, complete all as specified and directed.
20
-
-
Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) and fixed in repair, complete all as specified and directed.
20
-
-
PVC connection 15mm size with PTMT nuts at boths end 600mm long and fixed in repair, complete all as specified and directed.
250
-
-
32mm or 40mm Waste coupling, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair, complete all as specified and directed.
8
-
-
Sheet glass shelf assembly 55cm long consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, selected quality as approved by GE, fixed in repair, complete all as specified and directed.
10
-
-
Chromium plated brass shower rose, fancy type (as approved by GE/Engr-In-Charge), 125mm size with shower arm, chromium plated, 195mm longh with bend of 45 degree with flange suitable for 15mm bore pipe with or without swivel joint fixed to pipe, fixed in repair, complete all as specified.
20
-
-
Supply only High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sqcm of 40mm bore, complete all as specified and directed.
20
-
-
Vitreous China bowl Urinal, flat back 465x355x265mm, white (white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm bore PVC waste pipe, complete fixed in repair, complete all as specified and directed.
5
-
-
Repairing of rolling shutters of any size and all connected accessories like anchoring rod, gear box, crank handle, chain wheel or any other items required for serviceable condition including one coat of synthetic enamel paint etc, complete all as specified and directed.
3
-
-
12mm toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed by Engr-In-Charge.
3
-
-
S&F in repair 25mm dia powder coated mild steel, chromium plated curtain rod including brackets, complete all as specified and directed.
100
-
-
Dismantling and breaking up PVC drain pipes 75/110mm dia, fixed to walls, laid in floors or in trenches and removal of demolished materials from the site, complete all as specified and directed.
60
-
-
PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm, fixed in cement concrete type B-1 (1:2:4), fixed in repair, complete all as specified and directed.
10
-
-
PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore 110mm, complete all as specified and directed.
20
-
-
PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore 75mm, complete all as specified and directed.
30
-
-
PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with adjustable clamps of bore 110mm, complete all as specified and directed.
30
-
-
PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with adjustable clamps of bore 75mm, complete all as specified and directed.
20
-
-
PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore, provided with oval access door, fixed in repair, complete all as specified and directed.
3
-
-
PVC (SWR) bends any radius, 110mm bore jointed with solvent cement (fitted with oval access door), fixed in repair, complete all as specified and directed.
10
-
-
PVC (SWR) bends any radius, 75mm bore jointed with solvent cement (fitted with oval access door), fixed in repair, complete all as specified and directed.
20
-
-
Rounding to edges of stone slabs of any type one edge, such as in steps cooking platform, cill of window and other simillar situations, complete all as specified and directed.
30
-
-
Repair to leakage/seepage in sunken portion of WC/Bath/Kitchen from outside area duly taking down brick/stone masonary or concrete surface upto the broken trap/bend/joint/pipe of any description and rectify the leakage from joints with cement sand mortar/replacement of CI/PVC trap/bend/joint/pipe and make good the disturbed portion, complete all as specified and directed by Enge-In-Charge.
10
-
-
Disconnecting existing PVC/ferro cement/MS tanks capacity exc.250 litres but n. exc 500 litres, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and directed.
80
-
-
Disconnecting existing PVC/ferro cement/MS tanks capacity exc.500 litres but n. exc 1000 litres, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and directed.
15
-
-
Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position inbcluding brass ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed.
10
-
-
Rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position inbcluding brass ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed.
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements