Institute Of Himalayan Bioresource Technology Tender

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required. i) 2x6 sqmm + 1x6 sqmm earth wire

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required. i) 4x4 sqmm + 2x4 sqmm earth wire

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required. i) 4x6 sqmm + 2x6 sqmm earth wire

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required. i) 4x10 sqmm + 2x6 sqmm earth wire

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required. i) 4x16 sqmm + 2x6 sqmm earth wire

Supplying & fixing suitable size GI/PVC box with modular plate in front on surface or in recess, including providing & fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. ( Modular Accessories Make: Anchor Roma/ Havells Crabtree/ Wipro North West).

Supplying & fixing 3 Pin, 5A ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Installation, testing and commissioning of pre wired, fluorescent fitting/ compact fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, inc connection with 1.5 sqmm FRLS insulated, copper conductor, single core cable and earthing etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc as required. i) Upto 450 mm sweep

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreadders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. (Make: Legrand/Hager/Schneider) i) 100A, 16KA, TPMCCB

Supplying and fixing following way, Single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator).(Make: Legrand/ Panasonic/ Hager/ Schneider). i) 12 way , Double door

Supplying and fixing following way, surface/ recess mounting, vertical type,415 V, TPN MCB Distribution Board, sheet steel, dust protected, powder painted, inclusive of 200 A, tinned copper bus bar, neutral bus bar, earth bar, din bar for mounting MCBs (But without MCBs and incomer) as required. (Make: Legrand/ Panasonic/ Hager/ Schneider). i) 4 way (4 + 12), Double Door

Supplying and fixing following way, surface/ recess mounting, vertical type,415 V, TPN MCB Distribution Board, sheet steel, dust protected, powder painted, inclusive of 200 A, tinned copper bus bar, neutral bus bar, earth bar, din bar for mounting MCBs (But without MCBs and incomer) as required. (Make: Legrand/ Panasonic/ Hager/ Schneider). i) 8 way (4 + 24), Double Door

Supplying and fixing 5 amps to 32 amp. rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: Legrand/ Panasonic/ Hager/ Schneider ). i) Single pole

Supplying and fixing 5 amps to 32 amp. rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: Legrand/ Panasonic/ Hager/ Schneider ). i) Single Pole & Neutral

Supplying and fixing 5 amps to 32 amp. rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: Legrand/ Panasonic/ Hager/ Schneider). i) Triple pole

Supplying & fixing following rating, four pole, 415 volt, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: Legrand/ Panasonic/ Hager/ Schneider) i) 40 A

Supplying and fixing TP sheet steel enclosure on surface/recess along with 16/25/32A, 415 V "c" curve TP MCB complete with connection,testing and commissioning etc. as required. (Make: Legrand/ Panasonic/ Hager/ Schneider)

Supplying & fixing cable end box ( loose wire box) suitable for Tripple pole & neutral, sheet steel, vertical MCB distribution board, 415 V, on surface/ recess complete with testing and commissioning etc. as required.

Suppying, Installation on wall, testing and commissioning of following capacity rising mains made of 1.6 mm thick IP 42 sheet steel enclosure duly painted ith powder coating, wall straps fully PVC insulated 4 Nos. aluminium bus bars having current density of 130 A/ sq cm at nominal current rating in convenient sections and suitable for 415 V, 3 phase, 4wire, 50 expansion joint, thrust pad including jointing and earthing with 2 runs of of galvanised iron strips etc. as required.(Rising mains confirming to IS 8623, TEC 439). i) 200 A (S.C. rating for 1 Sec-15 KA)

Supplying, Installation, testing and commissioning of 200 AMP. Switch Disconnector Fuse Unit, Four Pole - AC-23A, 50Hz, 415V, in sheet steel enclosure with 04 No. HBC Fuses complete as required. (Make: Legrand/ Panasonic/ Hager/ Schneider). i) 200 A TPN

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia GI pipe from earth electrode including connection with copper thimble excavation and refilling as required.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. i) Upto 35 sqmm

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. i) Above 35 sqmm and upto 95 sqmm

Supplying and making end termination with brass compression gland and alumium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 x 25 sqmm (28 mm )

Supplying and making end termination with brass compression gland and alumium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 x 35 sqmm (32 mm )

Supplying and making end termination with brass compression gland and alumium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 x 70 sqmm (38 mm )

Supplying and making end termination with brass compression gland and alumium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. i) 3.5 x 95 sqmm (45 mm )

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ KEI/ Havells/ Finolex): i) 3.5 core 25 sqmm Armoured cable

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ KEI/ Havells/ Finolex ): i) 3.5 core 35 sqmm Armoured cable

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ KEI/ Havells/ Finolex): i) 3.5 core 70 sqmm Armoured cable

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ KEI/ Havells/ Finolex): i) 3.5 core 95 sqmm Armoured cable

Supplying & fixing 18 Watt LED Tubelight made of aluminium extrusion housing with high efficient LEd & opal diffuser(Make: Bajaj/ havells/ Halonix/ Crompton)

Supplying & fixing Industrial Channel made of CRCA sheet steel housing suitable for 2x18 Watt LED T8 Tubelight. (Make: Bajaj/ havells/ Halonix/ Crompton)

Supplying & Fixing, 450 mm, Single Phase, 1400 RPM, Heavy Duty Industrial Exhaust Fan complete as required. (Make: Bajaj/ Crompton/Havells).

SITC of floor mounted Feeder Pillar made out of 2 mm thick CRCA Sheet steel with double Door and inbuilt locking arrangement. The Feeder Pillar should be provided terminal block for incoming & outgoing cable. From MCCB to Terminal Block proper wiring should be done. All connections ( incoming & outgoing) must be taken out in cable alley with suitable rated solid conductor. Fabrication will be dust,vermin proof,duly powder coated. The Feeder Pillar will have to be supplied with suitable pedastal ( MS angle iron frame of MS Channel Base) for grouting in RCC and proper Gland at bottom. The minimum Depth of the Feeder Pillar must be considerd as 500 mm. The panel will consist of: INCOMER : a) MCCB of capacity 250 amp., 4 pole, 36 KA (Make :Havells or Eq ) = 01 No b) Digital Metering = 01 set c) LED Indicator R,Y,B-03 No. (Make: L&T or eq.). d). High conductive electrolytic grade aluminium busbar of 300 amp.,TPN,with heat shrinkable sleeve,duly coloured coded-01 set(Make:Hindalco or eq.) OUTGOING : a).TP MCCB 150 Amp.,16 KA = 01 no. b)TP MCCB 100 Amp., 16 Ka = 02 no. c)TP MCCB 63 Amp., 16 Ka = 02 no.( All MCCB must be Supplied with Spreader Link) (All MCCB Make: Legrand/Hager/Schneider)