Himachal Pradesh State Electricity Board Limited Tender

Edges of slabs and breaks in floors and walls Under 20 cm wide.

Providng and laying in position specificed grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level 1:1.5:3 (1 Cement: 1.5 Sand :3 graded stone aggregate 20mm nominal size.)

Steel reinforceemnt for R.C.C work including straightening, cutting, bending, placing in positoin and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel work welded in builts up sections/framed work, including cutting, hoisting, fixing in position and appliying a priming coat of approved steel primer using structural steel etc. as prequired gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

P/L 450mm dia MS Pipe (Jindal star 6.35mm thick) with welded joints (70.6Kg/Rmt)

Providing by Manufacturing out of straight length, laying in position and jointing 450mm dia standard 90ᶿ miterd bend (three cut method) i/c cost of material, cutting, welding and consumables (Wt. 76.25Kg)

Providing by Manufacturing out of straight length, laying in position and jointing 450mm dia standard TEE i/c cost of material, cutting, welding and consumable charges (Wt. 69.61Kg)

Providing, fixing and leak testing of 450mm size Carbon steel (ASTM A 216 Gr WCB), bolted bonnet, ASA 150#, flanged end (ASME B 16.5 150#), hand wheel operated cast steel gate valve having ASTM A 216 GR. WCB wedge, SS 410 Trim, API 600 manufacturing std., AP 598 inspection and testing standard with seat test pressure of 300psi i/c necessary accessory i.e. matching flanges, nuts bolts, washers and gasket etc. complete.

P/F 450mm dia. Electromagnetic flowmeter of following specificaitons i/c providing & welding to the joining pipes flanges of same specifications as that of flow meter with specified Nuts bolts, Gaskets etc. complete: Service: water, flow range: 286 to 2861Mᶺ3 per hour, process pressurre: 16kg/cmᶺ2, Temprature: 20ᶿ C to 70ᶿ C, Electrode: SS316L, liner Material: PTFE, Flange standard: ANSI B 16.5 class 150, flange : carbon steel, carbon steel coil housing, sensor material flow tube SS316, Transmitte Material: aluminium with powder coating, Protection grade: transmitter: IP65, sensor IP67, Electronics : Remote display, Power supply 230V AC, Output: 4-20mA, RS 485, Pluse, LCD Display, 4 Buttons, Function: self Diagnosis, Emply pipe alarm, high and low flow alarm, Totalzer 26/06/24 Forward totalizer, Revese totalizer, Net totalizer display flow unit: L/Sec, Ltrs/Minute, Cum/Sec, Cum/Hour, Cum/min.

Providing & installing telemetric system i.e. Sim card based loT device (4G) for Remote Data Monitoring (Data logging) with free subscription for first year.

Providing and grouting in Valve chamber wall 3" dia 6m long GI steel Tube 80mm NB and 88.9mm OD with 3.2mm wiall thickness and wt. @ 6.72kg/m to act as supporting pole for holding sevice cable/wire of 220V 50Hz Ac supply.

P/L two core, double insulated aluminium service for carrying 220V 50Hz Ac supply.

Coursed rubble measonary (First sort) with hard stones in foundation and plinth as Pitching with CM 1:3 i/c deep raking of joints.