Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 13,44,000Document Cost
₹ 20,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_HBC_216229_1Bid Award Id
ViewTender No
2022/HPHC/MARCH-08/12Tender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of
curing, admixtures in recommended proportions as per IS: 9103
to accelerate/ retard setting of concrete, improve workability
without impairing strength and durability as per direction of the
Engineer-in-charge. (Note :- Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is
used as per design mix). All works up to Plinth Level M-1 O grade plain cement concrete (cement content considered @ 220
kg/cum) HSR 6.22.2.3
1475.41
-
3470
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering
finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
(Note :- Cement content considered in this item is@ 330 kg/cum. Less cement used as per design mix is recoverable.However no extra payment shall be made if excess cement is used as per design mix). Unit 6.24.2 All works above plinth level up to floor IV level
1475.41
-
5051
Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : HSR 7.22.1 Cement mortar 1:4 (1 cement: 4 coarse sand)
446.68
-
4342
10cm thick (average) mud phaska of damped brick earth on roofs laid to
slope consolidated and plastered with 25 mm thick mud mortar with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow-dung) and covered with machine moulded tile bricks, grouted with cement mortar 1 :3 ( 1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat.
9.12.1 With machine moulded common burnt clay non-modular brick sqm
tiles of class designation 12.5, conforming to IS 2690 HSR 9.12.1
14.55
-
550
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm
thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required
cutting/making, opening for services like diffusers, grills, light fittings, fixtures,smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI djustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from sqm plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with centre borders of 48 mm and the side borders of 30 mm,backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. HSR 9.47.4
64.53
-
758
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter HSR 9.57.2
1784.89
-
224
Providing and fixing on wall face Unplasticised - PVC moulded fittings/accessories for Unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion Coupler 110 mm bend HSR 9.58.5.2
1004
-
104
12 mm cement plaster of mix : 1 :4 (1 cement: 4 fine sand) HSR 11.5.3
10583.8
-
94
15 mm cement plaster on rough side of single or half brick wall of mix: 1 :4 (1 cement: 4 coarse sand) HSR 11.9.1
9165.46
-
115
Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface
smooth with sand paper to get en even and smooth finish including cost and
carriage of all material , labour charges, scaffolding, sundries etc. complete HSR 11.58
108244
-
36
Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade:
11.64.1 New work (two or more coats) over and including water thinnable priming coat with cement primer HSR 11.64.1
67250.4
-
50
Applying priming coats with primer of approved brand and manufacture,
having low voe (Volatile Organic Compound ) content. HSR 11.69.2 With water thinnable cement primer on wall surface having voe content less than 50 grams/litre
38581.04
-
25
Finishing walls with Acrylic Smooth exterior paint of required shade :
HSR 11.95.1 New work (Two or more coat applied @ 1.67 litre/1 O sqm over and including priming coat of exterior primer applied @ 2.20
kg/10 sqm)
49360.9
-
98
Preparation of ply wood surface for painting including sand papering
the surface and applying filling with approved quality filler consisting of white
lead, linseed oil, varnish and chalk mitti including finishing the surface to
required finish complete. HSR 11.76
1420.98
-
41
Applying pink primer or aluminium priming coat on wood work including
preparation of surface, Knotting and stopping etc. HSR 11.77
1417.98
-
21
Painting two coats excluding priming coat with synthetic enamel paint in all
shades on new wood work or metallic or plastered or concrete surfaces to
give an even shade. HSR 11.78
1420.98
-
35
Providing and fixing ISi marked flush door shutters conforming to IS : 2202
(Part I) decorative type, core of block board construction with frame of 1st
class hard wood and well matched teak 3 ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters.
12.36.1 35 mm thick including ISi marked Stainless Steel butt hinges with sqm
necessary screws HSR 12.36.1
592.05
-
2671
Providing and fixing aluminium sliding door bolts, ISi marked anodised
(anodic coating not less than grade AC 10 as per IS : 1868), transparent or
dyed to required colour or shade, with nuts and screws etc. complete :HSR 12.98.2 250x16 mm
252
-
200
Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade, with necessary screws etc. complete HSR 12.99.3 200x10 mm
273
-
81
Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade, with necessary screws etc. complete 150x10 mm HSR 12.99.4
221
-
69
100x10 mm HSR 12.99.5
310
-
52
250x10 mm HSR 12.99.2
246.06
-
94
200x10 mm HSR 12.99.3
372
-
81
Handle 150mm 12.99.4
362
-
69
Providing and fixing aluminium handles, ISi marked, anodised (anodic coating
not less than grade AC 1 O as per IS : 1868) transparent or dyed to required
colour or shade, with necessary screws etc. complete HSR 12.102.1 125 mm
306
-
55
Dressing bed and preparation of sub grade for lining by
mechanical/ mannual means HSR 14.1
21473.75
-
5
Regarding terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud
plaster, preparing the surface of mud phaska to proper slope,
relaying mud plaster gobri leaping and tiles or bricks, grouted in
cement mortar 1 :3 (1 cement : 3 fine sand), including replacing
unserviceable tiles or bricks with new ones and disposal of
unserviceable material to the dumping ground (the cost of the
new tiles or brick excluded), all complete as per direction of
Engineer-in-Charge. HSR 30.9
7400.78
-
245
Repairs to plaster of thickness 12 mm to 20 mm in patches of
area 2.5 sq.meters and under, including cutting the patch in
proper shape, raking out joints and preparing and plastering the
surface of the walls complete, including disposal of rubbish to the
dumping ground, all complete as per direction of Engineer-inCharge.
HSR 30.16.1 With cement mortar 1 :4 ( 1 cement : 4 fine sand)
14811.8
-
197
Removing white or colour wash by scrapping and sand papering sqm
and preparing the surface smooth including necessary repairs to scratches etc. complete HSR 30.21
94940
-
8
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade One or more coats on old work HSR 30.28.1
9551.9
-
43
Providing and fixing M.S. round or square bars with M.S. flats at
required spacing in wooden frames of windows and clerestory
windows HSR 30.73
7102
-
80
Total HSR ( Civil)
-
-
-
DSR PH ITEM
-
-
-
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator,
supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm DSR2018, 14.77 (-25%)
2520.27
-
256.9
TOTAL DSR PH ITEMS
-
-
-
HSR (Public Health)
-
-
-
Constructing brick masonry inspection Chamber sizes as given below up
to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40
per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching
12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat
cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm
thick: with 455mmx455mm / 455mm x610mm inside light duty C.I.
inspection chamber cover and frame weight as per 1.5.1. specification
painted with 3 coats of black bitumastic superior paint complete as per
standard design. Size 600 mm X900 mm inside (with 455 mm x 455 mm cover frame light duty single seal weighing 20 kg with R.C.C.
slab) HSR 21.84.3
170
-
6090
Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1 :3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the
satisfaction to the Engineer-in-charge. HSR 21.93.2 Type:- Extra Heavy Duty Set (EHD-20) 560MM Clear Opening
344
-
1185
Providing salt glazed stone ware pipes grade 'A' in standard length of 600
mm each pipe marked with IS: 651 and their lowering, cutting, jointing and
testing as described in item No. 21.38, 21.39, item 21.40 induding the
cost of jointing materials as well as carriage, loading, unloading, stacking,
handling, re-handling etc. complete in all respects to the satisfaction of
Engineer-in-charge. 250mm i/d HSR 21.94.4
715.83
-
408
400mm i/d HSR 21.94.7
588.34
-
1509
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with
100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures complete, including
cutting and making good the walls and floors wherever required: Stainless Steel AISl-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests HSR 22.22.2
332
-
8196
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c
cutting and making good the walls etc. Internal work· Exposed on wall
22.88.1 15 mm dia nominal bore
450.01
-
191
22.88.2 20 mm dia nominal bore
1480.26
-
239
22.88.4 32 mm dia nominal bore
988.12
-
393
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :HSR 22.103.2 20 mm nominal bore
366
-
329
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the
pipe and making long screws etc. complete (New work) :
HSR 22.94.1 15 mm nominal bore
130
-
139
22.94.2 20 mm nominal bore
158
-
174
HSR 22.94.4 32 mm nominal bore
74
-
289
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end): HSR 22.98
636
-
430
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. HSR 22.109
630
-
55
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISi : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. HSR 22.182
346000
-
8
TOTAL HSR PH
-
-
-
NS PH ITEMS
-
-
-
Pdg. & fixing SWR PVC pipe classic type ‘B’ and specials ISI marked including fitting joint solvent mixture complete in all respect- a) 110mm dia pipe
527.9
-
315.95
75mm
389.53
-
261.3
Specials for 110mm dia pipe-
-
-
-
i) Clamp
1392
-
28.8
ii) Plain Bend
414
-
106.85
iii Socket
530
-
86.55
IV)Door Toe
296
-
148.15
Single junction with door
276
-
166
For 75mm dia pipe-
-
-
-
i) Clamp
501
-
28
ii) Plain Bend
342
-
90.95
iii) Socket
300
-
72.9
iv) N-Trap
247
-
138.95
Providing and fixing CP brass Push Cock
610
-
500
Providing and fixing in position openable CP S.S jali of Heavy quality, 100mm dia of standard make approved by engineer in-charge complete in all respect.
792
-
200
TOTAL PH NS ITEMS
-
-
-
NS(CIVIL)
-
-
-
Finishing of laid C. Conc. With vacuum dewatering system, surface vibrator and fine trowel complete in all respects N.S
21443.72
-
61.75
Cutting groove in flooring in expansion joint 4mmx50mm size N.S
13008.12
-
28
Providing and fixing decorative wallpaper of different colour and design etc. complete in all respect.
63.54
-
950
P/F Victoria make PVC wall panelling complerte in all respect
202.89
-
1060
Providing & fixing wooden flooring 8mm thick victor make with 1mm thick foam Complete in all respect
64.53
-
1350
Total NS (Civil)
-
-
-
HSR ELECTRICAL
-
-
-
HSR 23.5 ) Copper wiring in existing PVC/ M.S Conduit Pipe on Surface / Recess 23.5.1.3)
-
-
-
23.5.1.3) Group C
3087
-
413
23.5.4 ) Wiring in existing conduit pipe and M.S boxes for 3-PIN 5Amp. plug point by using 2nos.1.50 sqmm FRLS copper wire & 1no.1.50 sqmm FRLS copper wire for earthing including providing 1no. 5/6 amp. 3/5 pin socket and 1no. 5/6 amp.switch etc. complete as reqd.
-
-
-
23.5.4.3) Group C
276
-
550
23.5.5 ) Wiring in existing conduit system for 3-PIN 15Amp. plug point by using 2nos.4.0 sqmm FRLS copper wire & 1no.4.0 sqmm FRLS copper wire for earthing including providing 1no. 15/16 amp. 3/5 pin socket and 1no. 15/16 amp.switch etc. complete as reqd.
-
-
-
23.5.5.3) Group C
72
-
897
HSR 23.5.6 ) Wiring main and sub mains in two singal core for phase and nutral wire and one single core for earth wire pvc insulation copper conductor cable 1100 volts grade in existing MS/pvc conduit etc as required
-
-
-
23.5.6.1) 1 run of size 1.50 sqmm (1/1.40mm)
11000
-
59
23.5.6.3) 1 run of size 4.0 sqmm (1/2.24mm)
800
-
122
23.5.6.4 ) 1 run of size 6 sqmm (1/2.80mm)
300
-
155
23.5.6.5 ) 1 run of size 10 sqmm (1/3.50mm)
200
-
347
HSR 23.7.6 ) Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box ,iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work.
-
-
-
23.7.6.2) PVC Pipe 25mm dia.
1300
-
36
23.7.6.3) PVC Pipe 32mm dia.
600
-
50
23.7.6.4) PVC Pipe 40mm dia.
200
-
64
HSR 23.8.1) P/F piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connection complete in all respect.
-
-
-
23.8.1.1 ) Switch 5 Amp. on existing sheet
800
-
18
23.8.1.2 ) Wall Socket 5 Amp. on existing sheet
150
-
32
23.8.1.3 ) Switch 15 Amp. on existing sheet
50
-
68
23.8.1.4 ) 6 pin 15 Amp. Multy Socket on existing sheet
50
-
88
23.8.1.12 ) Bakelite angle / straight button holder large size
80
-
51
23.8.1.13 ) Socket size Rotary step type Electronic regulator for A.C Ceiling fan on existing sheet
1524
-
210
HSR 23.8.2) Supply and Fixing of bakelite sheet on existing MS/GI/Wooden/PVC etc. including fixing with brass screws and washers.
-
-
-
23.8.2.1) 5mm thick
400
-
17
23.8.2.2) 3mm thick
600
-
13
HSR 23.8.3) Supply and Erection of suitable size MS/GI box covered with 5mm bakelite sheet as below
-
-
-
23.8.3.5) 200mm x 150 mm x 60mm deep M.S. Box
120
-
260
HSR 23.8.10) Providing and fixing GI concealed sheet metal boxes with inner and outer face plate i/c concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required to complete the job in all respect
-
-
-
23.8.10.1) 1 & 2 Modules including combined plate for telephone & data
40
-
104
23.8.10. 2) 3 Modules
20
-
142
23.8.10. 3) 4 Modules
40
-
157
23.8.10. 4) 6 Modules
30
-
208
23.8.10. 5) 8 Modules
25
-
261
23.8.10. 6) 12 Modules
15
-
316
HSR 23.8.11) P/F Modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect.
-
-
-
23.8.11.1) 5 Amp. 1 way Switch
300
-
46
23.8.11.2) 5 Amp. 2 way Switch
12
-
83
23.8.11.3) 15 Amp. 1 way Switch
40
-
92
23.8.11.4) 5 Amp. Socket
50
-
92
23.8.11.5) 15 Amp. 6 pin Socket
40
-
139
23.8.11.7) Step type Fan Regulator 2 modules 300 watt
120
-
288
23.8.11.8) Telephone socket outlet modular type
16
-
84
23.8.11.9) T.V socket outlet modular type
12
-
84
23.8.11.10) Blanking plate
30
-
20
23.8.11.11) RJ 45 Computer Data socket outlet for Cat-6 or Cat-6e cable modular type
40
-
340
HSR 23.8.12) Supply and Fixing of 3mm thick bakelite sheet cover on existing MS/PVC junction box/ tee etc. including fixing with brass screws and washers.
1200
-
9
HSR 23.22.1) Supply and erection of Modular case circult breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections requried to complete the job in all respect up to the entire satisfaction of the Engineer-in charge of the work.
-
-
-
23.22.1.9 ) 4 pole MCCB 6 amp to 100 amp, 25 KA
20
-
6865
23.22.1.10 ) 4 pole MCCB 125 amp to 160 amp, 25 KA
6
-
7497
23.22.1.11 ) 4 pole MCCB 200 amp to 250 amp, 25 KA
8
-
12104
23.22.1.12 ) 4 pole MCCB 300 amp to 400 amp, 50 KA
2
-
22788
HSR 23.22.2) Supply and erection of MCCB Enclosure made of sheet steel suitable for mounting MCCB of following ratings
-
-
-
23.22.2.1 ) MCCB up to 125 A FP
25
-
2032
23.22.2.2 ) MCCB up to 250 A FP
6
-
4515
23.22.2.3 ) MCCB above 250 A & up to 630 A FP
2
-
6819
HSR 23.22.4) Supply and erection of Double door sheet steel enclosure distribution board suitable for MCB's and ELCB's etc. recessed in wall including bonding to earth with all labour & material reqd. to complete the job in all respect up to the entire satisfaction of the Engineer-in charge of the work.
-
-
-
23.22.4.3 ) SPN DB double door 12 way (2 incomming & 10 outgoing)
20
-
1910
23.22.4.5 ) TPN DB Horizontal type double door 4 way (8 incomming & 3phase x 4 outgoing)
30
-
3031
23.22.4.9 ) Vertical TPN DB double door 4 way (8 incomming & 3phase x 4 outgoing)
4
-
6817
23.22.4.10 ) Vertical TPN DB double door 6 way (8 incomming & 3phase x 6 outgoing)
2
-
8089
HSR 23.22.5 ) Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections.
-
-
-
23.22.5.1) 6 amp. to 32 amp Single Pole
750
-
162
23.22.5.7 ) 6 amp. to 32 amp MCB Four Pole
20
-
1019
23.22.5.8 ) 40 amp. to 63 amp MCB Four Pole
56
-
1446
HSR 23.22.7 ) Supply and Erection of blanking sheet in existing distribution boards.
30
-
9
HSR 23.22.8 ) S/I/T/C Four pole ON LOAD Manual change over switch in S.S enclosure of following ratings.
-
-
-
23.22.8.3) 200 amp. 415 Volt
2
-
16751
HSR 23.23.1) Supply and fixing galvanised iron flexible pipe complete with socket nipples and check nuts etc. at both ends (upto length of one mtr.)
-
-
-
23.23.1.3) Size 25 mm dia.
250
-
66
HSR 23.23.5) Supply and erection of U-PVC Trunking/Channel of following size including cost of fixing on wall, floor and ceiling etc. with required material to complete the job in all respect up to the entire satisfaction of the Engineer-in charge of the work.
-
-
-
23.23.5.1) 25 x12mm
120
-
24
23.23.5.3) 38 x 25mm
70
-
52
23.23.5.4) 50 x 50mm
150
-
85
HSR 23.23.8)Supply and laying of muticore telephone cable condoctor 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/ channel and making necessary connection complete in all respect and upto the entire satisfaction of the Engineer- in - Charge of the work.
-
-
-
23.23.8.1) 2 Pair telephone wire
600
-
8
23.23.8.2) 4 Pair telephone wire
500
-
16
HSR 23.23.9) Supply and drawing of 1no. UTP 4 pair CAT-6 LAN cable in existing surface/recess MS/PVC conduit as reqd.
1200
-
35
MS STAND, BUS BAR CHAMBER AND PANELS (23.24)
-
-
-
HSR-23.24.3) Supply and erection of metal clad bus-bar chamber made from 1.6mm thick M.S. sheet and fixing with rag bolts on wall or on existing pedestal/angle iron frame including bonding, detachable top and bottom including painting and necessary connection etc. (Alluminium bars )
-
-
-
23.24.3.2) 100 amp. 4 bars of 100cm each (cross section 25mm x 6mm ) chamber overall size 60m x 45cm x 18cm.
30
-
3473
23.24.3.3) 100 amp. 4 bars of 100cm each (cross section 25mm x 6mm ) chamber overall size 1.10m x 45cm x 18cm.
4
-
5769
23.24.3.11) 400 amp. 4 bars of 100cm each (cross section 63mm x 6mm ) chamber overall size 1.10m x 55cm x 23cm.
2
-
12280
(HSR-23.24.4) SITC of Load bank with digital meter module cost of digital Amp./Volt meter with selector switch wiring but excluding cost of incoming and outgoing MCCB's etc. suitable for operation on 240/415 volts AC supply with both side cable alley, interconnection and fixing the same in existing MS pedestal/ wall with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.
-
-
-
23.24.4.1) Load bank 4 way 250 Amp.
4
-
48341
23.24.4.3) Load bank 4 way 400 Amp.
2
-
54274
23.24.4.4) Load bank 8 way 400 Amp.
2
-
63405
H.S.R-23.25 ) Dismantling
-
-
-
23.25.2) Dismentaling old wiring points (Recess wiring or partly recess partly surface system,recess conduit and box not to be dismentaled) including necessary repair to wall etc.
-
-
-
23.25.2.1) Light / Fan or Call bell point including circuit / sub main wiring
3087
-
14
23.25.2.2) Wall socket point including circuit / sub main wiring
248
-
14
H.S.R-23.27 )Supply and erection of Godrej Almirah type M.S. pedestal made of 50 mm x 50 mm x 6mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars.The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1 :2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineerin-charge of the work:- .
-
-
-
23.27.2) M.S. pedestal of size 750 mm wide , 900 mm high , 300 mm deep and each bottom totally open , duly embeded in cement concrete block of size 900mm x 450 mm x 200 mm above ground level , having a base of size 1050mm x 600 mm x 250 mm below ground level .
1
-
7113
23.27.4) M.S. pedestal of size 900 mm wide, 1500 mm high,450mm deep and bottom totally open , duly embeded in cement concrete block of size 1050 mm x 600 mm x 200 mm above ground level , having a base of size 1200mm x 750 mm x 250 mm below ground level .
1
-
11338
23.27.5) M.S. pedestal of size 1200 mm wide , 1500 mm high ,450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1350mm x 600 mm x 200 mm above ground level , having a base of size 1500mm x 750 mm x 250 mm below ground level .
1
-
13838
EARTHING AND LIGHTENING ARRESTOR (HSR 24.1)
-
-
-
24.1.1) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
32
-
3047
24.1.2) Extra for using salt and char coal/coke for pipe earth electrode as required
32
-
730
24.1.3) Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt) complete as required.
12
-
3772
24.1.4) Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.
5
-
9267
24.1.5) Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode
17
-
897
24.1.8) Supplying and laying 25mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.
528
-
108
24.1.10) Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.
60
-
818
L.T. CABLE (H.S.R 24.2)
-
-
-
Laying of underground cable in pipe /existing open/closed trench etc as reqd.(HSR-24.2.4)
-
-
-
24.2.4.2) 16 sqmm to 35 sqmm 2 to 4 Core
3820
-
14
24.2.4.3) 50sqmm to 150 sqmm 2 to 4 Core
4250
-
24
Supply and erection of suitable compression type brass cable glands for underground Cable :- (HSR-24.2.7)
-
-
-
24.2.7.2) 10 sqmm to 16 sqmm Cable 2 to 4 Core
106
-
50
24.2.7.3) 25 sqmm to 50 sqmm Cable 2 to 4 Core
54
-
86
24.2.7.4) 70 sqmm to 95 sqmm Cable 3 to 3.5 Core
24
-
116
24.2.7.5) 120 sqmm to 185 sqmm Cable 3 to 3.5 Core
2
-
149
Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work . (HSR-24.2.8)
-
-
-
24.2.8.4) 16sqmm
470
-
9
24.2.8.5) 25sqmm
156
-
11
24.2.8.6) 35sqmm
18
-
12
24.2.8.7) 50sqmm
60
-
17
24.2.8.8) 70sqmm
20
-
22
24.2.8.9) 95 sqmm
54
-
26
24.2.8.10) 120 sqmm
6
-
36
24.2.8.12) 185 sqmm
6
-
55
24.2.8.13) 240 sqmm
4
-
79
24.2.8.14) 300 sqmm
18
-
102
24.2.8.15) 400 sqmm
12
-
140
Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint. (HSR-24.2.9)
-
-
-
24.2.9.7) For 185 sqmm Cable 300 sqmm cable 3 to 4 Core
3
-
7547
24.2.9.8) For 400 sqmm Cable 3 to 4 Core
1
-
7972
Supply and erection of single phase weather proof M.S. Box of size 20 cm x 15 cm x 10 cm with hinged cover made of 2.0 mm thick M.S. sheet , locking arrangements, housed in wall/fixed on pole, including the cost of 1 no. 4way 16 amp. bakelite connector, 1no. 6 amp. SPMCB and 1 nos. 16 amp. neutral link fixed on bakelite sheet in the M.S Box including painting and necessary connections.(HSR-24.4.5)
28
-
640
S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/
coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. (HSR-24.5.2)
-
-
-
24.5.2.3) DWC/HDPE pipe 63/50 mm outer dialinner dia
1800
-
139
24.5.2.4) DWC/HDPE pipe 90/75 mm outer dialinner dia
1000
-
180
24.5.2.5) DWC/HDPE pipe 120/102 mm outer dialinner dia
1100
-
270
RCC Foundation for D.G Set (HSR-24.7)
-
-
-
Providing RCC foundation of M-20 grade (1 cement :1.5 stone aggregate : 3 coarse sand) i/c excavation , steel reinforcement (Fe500) @ 50kg/cum of concrete contents, concrete cover 50mm over a bed of 75mm thick PCC 1:5:10 of required dimensions as per OEM recommendations to provide levelled surface for placement of DG Set complete in all respect and as per directions of Engineer-in-charge.(Size of foundation assumed = (5.0 x 1.80 x 1.0 )mtr. unit per cum. Note- As size and dynamic load of DG Set vary from manufacturer to manufacturer, item of DG Set foundation have been included on the basis of cubic contents of RCC.
-
-
-
24.7.2) 60 TO 90 KVA DG Set
2
-
24814
HSR Amount E.I
-
-
-
NS Electrical
-
-
-
Supply , Installation, testing and commissioning of 62.5 KVA water cooled , silent diesel Generating set complete with alternator rated at three phase 415 volts, 50 cycle, 0.8 PF & 1500 RPM with AMF Panel (outside/inside the canopy), Acoustic Enclosure and battery charger etc.( To be installed out door on existing platform excluding cost of platform ) as per following specifications : -
2
-
820880
A. DIESEL ENGINE : Engine multi cylinder, developing output as per 62.5 KVA DG Set at 1500 RPM, Vertical, totally enclosed, water cooled, comprising compression ignition, electric start, 4 stroke high speed diesel engine conforming to IS - 4722 , ISO - 3046, BS - 5514. The engine shall be complete with all standard and electrical accessories as per standard supply of manufactures. The engine shall be coupled with 3 phase 415 volts, 50 cycle, 0.8 PF & 1500 RPM, alternator as per IS - 4722 / BIS - 2613, rated for 24 hours of continuous operation with 10 % over load capacity for one hour in every 12 hours and comprising with a) AMF Panel of required size complete with all accessories as required , IP-53 protection as per IS /IEC :60947(Part-I) / 2007
b) ON / OFF start keys
c) Lube oil pressure gauge
d) Fuel Tank with capacity for 8 hours continuous running at full load e) Residential Silencer of required size and length i/c all necessary material as required.
-
-
-
f) 1 No, 12 Volts, 150 AH, DC Mtr. Free batteries with leads & container.
g) AVM Pads fitted on base frame
h) The base frame would be fabricated from suitable M.S. Channels suitable machined to perfect alignment of the engine and alternator with rigid construction and necessary reinforcement to ensure minimum vibration.
(i) AC Digital volts and Amperes metres with selector switch of class 1.5 accuracy (j) 4 pole MCCB of suitable capacity on output of DG set
(k) 4 pole MCCB of 100 Amp capacity on output and input side of AMF panel (l) 4 pole Contractors of suitable capacity in AMF Panel
(m) Pilot lamps 3 nos. (n) 5 nos. Indicating lamps to indicate main low voltage , load on mains , DG set running , load on set and battery charger ON (o) Under voltage relay for mains (p) Over voltage protection (q) Any other accessories to make the generating set functional shall be installed as per manufacturer's specification.
-
-
-
(B) BATTERY CHARGER: The battery charger with volt metre and Ammeter shall be installed of required size and rating for charging of battery from mains. This will be in addition to the battery charging alternator fitted on the engine.
( C ) ACCOUSTIC ENCLOSURE : Acoustic enclosure shall be provided as per Technical specification as follows :-
1) CONSTRUCTION & PAINTING : i) The enclosure shall be fabricated out of 16 SWG CRCA sheet silent D.G. set container shall be of modular construction with the provision to assemble and dismantle easily at site of work.
ii) The base fame shall be made of ISMC of suitable section.
iii) Durable industrial system is to be provided on the doors and doors are fitted with high quality EPDM gasket to avoid leakage of sound. iv) Weather proof anti corrosion treatment to be provided to the entire structure with powder coating.
v) Neutral/Body earthing points at the side of enclosure are to be provided
vi) Emergency stop push button shall be provided outside the container.
vii) A tube fitting with tube rod for proper light inside the canopy shall be provided.
-
-
-
D.) ACCOUSTIC INSULATION : i) Sound proofing of the enclosure shall be done with quality rock wood/Mineral wood conforming to IS-8183-1993 of 25mm thickness and density at 30 Kg./M compressed along with 3mm thick vinyl sheet and non ferrous sheet. ii) Exhaust pipe is to be thoroughly insulated by covering it with glass wool and further claded with Aluminium sheet.
iii) 75 db A noise level as per Central Pollution Control Board (CPCB) -II with latest amanedments
Note Any other material required to complete the Acoustic Enclosure shall be installed as per manufacturer's specifications.
-
-
-
S/I/T/C of Automatic Boom Barrier of Length upto 6.0 Mtr. (MAKE- TEKWIN/CAME/MAGNETIC/CCI ) with all labour & petty material reqd. to complete in all respect upto the entire satisfaction of Engineer-in-Charge having as per following techanical specifications :-
2
-
100000
BOOM SIZE - Upto 6.0 MTR (with Retraceable feature)
-
-
-
FREQUENCY- 50/60 HZ
-
-
-
OPEN TIME- 3 TO 6 SEC.
-
-
-
MOTOR- Electro-Mechanical
-
-
-
VOLTAGE- 220V +- 10 %
-
-
-
CONTROLLER- Microprocessor based
-
-
-
INTERFACE- Traffic Light less than 10A
-
-
-
BODY -Weather proof with Anti-Corrosion treetment
-
-
-
Other accessories- operating switch & Boom stand / Remote
-
-
-
BOOM- Motion Control by balanced spring system
-
-
-
IP GRADE--- IP55
-
-
-
REMOTE DISTANCE- 10 to 20 Mtr.
-
-
-
OPTIONAL- Access Control System. RF Reader, Photo Cell
-
-
-
DUTY CYCLE- 100%
-
-
-
LED INDICATOR- RED & GREEN for Opening / Close Status
-
-
-
Laying and Jointing PVC Pipe. Heading
-
-
-
Digging/Drilling for HDPE PIPE and OFC/LAN/TEL. cable upto 4mtrs. below ground level with trenchless horizontal directional drilling & HDPE pipe pulling machine (HDD) with all labour and material required to complete th job in all respect .
400
-
301.75
S/E of Plain HDPE Pipe 50mm outer dia. (ISI) for OFC/LAN/TEL. cable laid upto 4 mtrs.below ground level including digging and refilling of earth & suitable size socket/ coupler reqd.for HDPE pipe to complete the work in all respect upto satisfaction of engineer-in-charge of work.
400
-
127.5
S/E of fresh air fans(Exhaust fan) 250mm sweep PVC body with louver shutter, suitable for single phase A.C 230 volts, 50Hz supply complete with all labour and petty material required to complete the job.(Haveell's Make& Model Ventlar DX or Cormpton Greaves Make & Model Brisk Air)
9
-
1490
S/Eof fresh air fans (Exhaust fan) 200mm sweep PVC body with louver shutter, suitable for single phase A.C. 230 Volts, 50 HZ supply complete with all labour and petty material required to complete the job.
6
-
1388
S/E of ISI marked propeller type ventilation fans (Exhaust fan) Size 300 mm, 1400 rpm Heavy Duty suitable for single phase A.C. 230 Volts, 50 HZ supply, A.C capacitor run conferming to IS:23/2/67 , complete with mounting ring with four no.s fixing holes without regulator as per rate contract specifications.with all labour and petty material required.
55
-
2914
Supply and erection of 300 mm aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm & blade thickness 0.80 mm) including all labour and other petty material required to complete the job.
55
-
592
Supply, Testing & Commissioning of wall fan 16" sweep (400mm) Oscillating type complete with built-in regulator. The fan is to fixed on wall with suitable fixing arrangement including connection from nearest light point with cost of Cu wire required ..
13
-
2200
Supply, Testing & Commissioning of heavy duty wall fan 18" sweep (450mm) 1440 RPM made of alluminium alloy single piece blade sturdy in construction heavy duty motor with two pre lubricated ball bearing precision built Oscillating mechanism with indexing option 90 degree Oscillation suitable for 230V, 50Hz AC Supply . The fan should consume less power is to fixed on wall with suitable fixing arrangement including connection from nearest light point with cost of Cu wire required .
8
-
5890
S/E of LED 10 watt rectangular bulk head fitting with opal diffuser i/c erection of fitting in wall/Ceiling & making necessary connection to complete the job with all labour and petty material as required.
100
-
355
Supply and erection of surface/ Recessed mounting, energy efficient LED 6000 K luminaire, complete with diffuser, HF electronic driver and other material required to complete the job including fixing the same on surface or in false ceiling with required material & making necessary connections etc :-
-
-
-
i) LED 36W Flat Panel ( 2'x2' )
50
-
2310
ii) LED 18 W Square / Round Fitting
960
-
1864
iii) LED 12 W Square / Round Fitting
450
-
1200
Supply and Erection of energy efficient 1200 mm sweep brushless direct current (BLDC motor) Ceiling fan of 5 star ratings having power consumption 26watts , 350 RPM Speed and 220 CHM air delivery complete with 3nos blades, canopies, shackles down rod but w/o regulator suitable for operation on AC 230 V, 50 HZ supply i/c erection charges with petty materials required to comlete job ( Make - Havell's & Model - Efficiencia NEO white or equivallent model of approved brand list)
360
-
2949
S/E of surface mounting LED Batten fitting 1x 18 /20 watt, (4 feet long), made of thermal poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect.
50
-
320
S/E of 200 watt LED Flood Light luminaire with IP-66 Protection and made in pressure die cast and heat shrink aluminium extrusion with high power LEDs as light source to be mount on existing building/ terrace complete in all respect.suitable for operation on 230 volts A.C supply .
6
-
13770
S/E of 50 watt LED Flood Light pressure die cast housing with IP-65 Protection and efficient LED output for better distribution to be mount on existing building/ terrace complete in all respect.suitable for operation on 230 volts A.C supply.
50
-
4753
S/E of 45 watt LED 6K, die cast aluminium street light luminaire with IP-65 Protection complete in all respect.suitable for operation on 230 volts A.C supply .
30
-
4578
S/I/T/C of 1.50 TR Nominal Cooling Capacity high wall "split type Air- conditioning unit" of 5 Star rating ( Hitachi/O-GENERAL/DAKIN - Make as per brand list) rated at 220 volts + 10%,single phase, 50 cycle per second electric supply and consisting of condensing and indoor unit,control panel of the unit, LCD Cordless remote, internal control wiring, thermostats, all accessories , without hard copper refrigerant & drain piping,Copper wound stabilizer 4 KVA ( Microtek/ Live Guard Luminius / Logicstate - Make) wall mount , MS stand and first charge of R-22 Gas & oil. The work should be completed in all respect including making repair of wall, floor and roof in original shape caused by making holes and chases etc.
1
-
51300
Supply, installation,testing and commissioning of 2 TR high wall mount Split Air-conditioning unit of Hitachi,Mitsubishi, O-General, Daikin Make as per brand list of 3 star rating to be operated on 220Volts(+) (-) 10% single phase,50 Hz AC supply and consisting of condensing indoor unit, cordless remote,without hard copper refrigerant & drain piping, 5 KVA wall mount copper wound voltage stablizer, first charge of R-22 Gas & oil and MS stand.The work should be completed in all respect i/c making repair of wall,floor and roof in origional shape caused by making holes and chases etc.
1
-
58580
Supply, installation, testing and commissioning of refrigerant piping made of good quality copper tube with insulation & drain pipe of required dia for 1.0 TR/1.5 TR/ 2 TR cap Split Air-conditioner recessed in wall complete with all labour and petty material required to complete the job.
16
-
800
Supply and erection of distribution box for termination of telephones wires with necessary arrangement hinged door cover option for locking arrangement protection class with (IP-64) back mount frame with stainless steel complete in all respect labour and material required including making necessary connection ( KRON MAKE Or other equivalent make)
-
-
-
i) size 10 Pair
10
-
2200
ii) size 50 Pair
2
-
2750
Supply and laying 10 pair telephone copper conductor 0.51 mm bright annealed jelly sealded un-armoured cable in existing pipe/ channel and making necessary connection complete in all respect upto the entire satisfaction of the Engineer- in - Charge of the work.
2000
-
120
Supply and erection of Caller ID Telephone instrument with digital display (Beetel / Panasonic- make) including making necessary connection .
10
-
1650
Supply and erection of Telephone instrument with digital display but without Caller ID (Beetel- make) including making necessary connection .
10
-
750
Supply of LT Armoured Cable of 1100 volt grade complete with making necessary connection of cable on both ends including loading unloading & carriage with all labour and petty material required to complete the job upto the entire staisfaction of Engineer - In - Charge of the work of following sizes :-
-
-
-
i) LT Armoured Cable of size 6 sqmm 2 core
1056
-
149
i) LT Armoured Cable of size 16 sqmm 4 core
960
-
199
ii) LT Armoured Cable of size 25 sqmm 4 core
840
-
262
iii) LT Armoured Cable of size 35 sqmm 4 core
250
-
332
iv) LT Armoured Cable of size 50 sqmm 3.5 core
780
-
392
v) LT Armoured Cable of size 70 sqmm 3.5 core
400
-
521
vi) LT Armoured Cable of size 95 sqmm 3.5 core
1100
-
668
iv) LT Armoured Cable of size 120 sqmm 3.5 core
150
-
827
Total NS Electrical
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements