Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 5,12,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Welfare Centrre In Police Line.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HBC_77218_1Bid Award Id
ViewTender No
2019/HPHC/MARCH-05/11Tender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Clearing grass and removal of the rubbish upto distance of 50 m outside the perphery of the area cleared HSR 6.27 CP 370%
7445.47
-
21.45
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size in plinth beam, beam foundation etc. excluding shuttering (HSR 10.79+ 10.95 a) ( CP 450%)
96.51
-
712.7
Cement concrete 1:1-1/2:3 with stone
aggregate 20 mm nominal size for
reinforced concrete work in slabs with
inclination not exceeding 25 degree with
horizontal, excluding steel reinforcement,
but including centring and shuttering, laid in
position complete in all respects. HSR 10.82 +10.95a) (CP 450%) 1st storey
91.91
-
1084.8
2nd Storey
118.62
-
1092.1
3rd Storey
6.15
-
1099.4
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20cm thickness (straight and
curved) beams, girders, stairs, columns,
(square or rectangular) battens and lintels
etc. excluding steel reinforcement but
including centring and shuttering, laid in
position, complete in all respects. (HSR 10.86+10.95a) CP 450% 1st Storey
134.27
-
1188.75
2nd Storey
119.18
-
1196.05
3rd Storey
3.03
-
1203.35
Cement concrete 1:1-1/2:3 with stone
aggregate 20 mm nominal size for
reinforced concrete work in fascias parapets
and other thin vertical sections, not covered
by Item Nos. 10.82, 10.86 to 10.88 not
exceeding 10 cm thickness excluding steel
reinforcement but including centring and
shuttering, laid in position, complete in all
respects. (HSR 10.89+10.95a) CP 450% 1st Storey
1.69
-
1708.95
2nd Storey
1.1
-
1716.25
3rd Storey
0.23
-
1723.55
Cement concrete 1:1-1/2:3 with stone
aggregate 20 mm nominal size for
reinforced concrete work in footings, strips,
foundations, beams, rafts, pedestals and
approach slabs of bridges etc, excluding
steel reinforcement but including centring
and shuttering, laid in position, complete in
all respects.(HSR 10.90 +10.95a). CP 450%
360.99
-
774
Cement concrete 1 : 4 : 8 with stone aggrega-te 40 mm Nominal size in foundation and plinth.HSR 10.39 CP@ 450%
84.3
-
403.1
Cement Concrete 1: 1 ½: 3 with stone
aggregate 20mm nominal size in foundation
and plinth. HSR 10.42 (CP 450%)
9.58
-
702.5
Cement Concrete 1:8:16 with stone
aggregate 40mm nominal size in first storey
upto 4 meters above plinth level. HSR 10.46 CP 450%
1st Storey
3.16
-
324.9
2nd Storey
0.77
-
327.45
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects (HSR 10.81+10.95(a) (CP 450%) 1st storey
1.57
-
1034.6
2nd Storey
0.23
-
1041.9
3rd Storey
1.33
-
1049.2
Cement concrete 1:1.5:3 with stone
aggregate 20 mm nominal size for
reinforced concrete work in fascias parapets
and other thin vertical sections, not covered
by Item Nos. 10.82, 10.86 to 10.88 not
exceeding 10 cm thickness excluding steel
reinforcement but including centring and
shuttering, laid in position, complete in all
respects. HSR 10.89+10.95(a) CP 450%
2nd storey
2.86
-
1716.25
Damp proof course 40 mm thick of cement concrete 1:1.5:3 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded. (HSR 10.114)-Note (CP 450%)
71.22
-
38.5
Providing and laying 60mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 25mm thick fine sand complete in all respect. (HSR 10.158 + CP @ 0%)
439.49
-
429
First class brick work laid in cement sand mortar 1:6 in foundation and plinth., as per HSR 11.2 (C.P.@600 %)
94.45
-
393.45
First class brick work laid in cement sand mortar 1:4 in foundation and plinth. (HSR 11.4 ) (CP 600%)
1
-
424.6
Dressed or moulded three brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required. HSR 11.77 CP 600%
146.56
-
16.3
Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required. HSR 11.78 CP 600%
41.05
-
7.2
Providing and laying autoclaved aerated (Cellular) Concrete light weight blocks ( As per IS :2185,Part 3 having density of 550 to 650 kg/sqm and compressive strength of 4.0 N/mm2 masonary in non load bearing walls using 100 mm thick AAC blocks complete in all respec (as per HSR item 11.104(ii )+11.41 CP 0%) with polymer modified adhesive of reputed make as approved by Engineer - in - Charge Ist Storey
234.88
-
480.15
2nd Storey
196.71
-
486.8
3rd Storey
75.25
-
493.45
Providing and laying autoclaved aerated (Cellular) Concrete light weight blocks ( As per IS :2185, Part 3 having density of 550 to 650 kg/sqm and compressive strength of 4.0 N/mm2 masonary in non load bearing walls using more than 100 mm thick AAC blocks complete in all respec (as per HSR item 11.105(ii ) (CP 0%) with polymer modified adhesive of reputed make as approved by Engineer - in - Charge Ist Storey
178.35
-
4129
2nd Storey
155.35
-
4186.75
3rd Storey
47.37
-
4244.5
4th storey
2.6
-
4302.25
Terracing consisting of tiles 22.86 cm X 11.43cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coasts of bitumen laid hot at 1.65 Kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. HSR 13.13 + note CP 600% 1st Storey
200.19
-
52.95
2nd storey
815.89
-
53.95
3rd storey
26.84
-
54.95
Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR 13.50) (CP 240%)
18
-
12.3
Cement concrete 1:1.5:3 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR 13.64) (CP 240%)
312.3
-
6.03
Providing and fixing PVC Rain water pipe 6kg Pressure of IsI mark in cement mortar during masonry work. (HSR 13.89)(CP 20%) (b) 150 MM dia PVC pipe 6 Kg Pressure.
169.95
-
336.65
Providing and fixing PVC bend ISI mark (HSR 13.90)(CP 20%). (b) 150 mm
40
-
165.4
Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 14.1 + CP 400%)
1935.24
-
36.95
Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping (HSR 14.4) (CP 400%) 2nd Storey
269.17
-
15.65
3rd Storey
15.8
-
15.95
Conglomerate floor 40 mm thick cement
concrete topping 1:2:4 HSR 14.9 (CP 400%)
1st Storey
3.48
-
31.5
2nd Storey
3.48
-
31.8
Precast chequred tiles 20mm thickness in ordinary grey cement without chips laid on 20mm thick bed of cement coarse sand mortar 1:3 with enat cement slurry between joints and over the base in floors, treads of steps and landings as per HSR (14.45+Note) (CP 400%)
194.46
-
111.48
Extra for nosing in marble stone for treads(14.50) (CP 90%)
141.98
-
19
Kotah stone flooring 20 mm to 25mm thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone.including rubbing and polishing as per HSR 14.62 (C.P.@250%) Note:- (i) Single piece of stone to be used in steps of stair (ii) Size of one piece should not be less than 22"x22" for flooring (iii) Kota stone with spacer joint 1" wide duly finished with marble chips in white cement. (iv) NO extra payment will be made on behalf of above note (i), (ii) & (iii) Ist Storey
248.65
-
201.95
2nd storey
144.81
-
202.25
3rd storey
15.34
-
202.55
Kotah stone 20 mm to 25 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (HSR 14.66) (CP 250%) Note:- (i) Single piece of stone to be used in steps of stair (ii) Size of one piece should not be less than 22"x22" for flooring (iii) Kota stone with spacer joint 1" wide duly finished with marble chips in white cement.(iv) NO extra payment will be made on behalf of above note (i), (ii) & (iii) Ist Storey
24.8
-
237
2nd storey
14.48
-
237.3
3rd storey
1.53
-
237.6
Providing and fixing vitrified tiles of size 600x 600mm of approved make in flooring laid in any pattern as spcefied over base of 20mm thick cement coarse sand mortar 1:3 and jointed with while cement slurry mixed with pigment to match the shade to tiles.
Note: Tile shall be premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO. (HSR 14.89)(CP -15%)
831.45
-
924.3
Providing and fixing Vitrified tiles of size 600x600mm of approved make in skirting /dados laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note: Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO (HSR 14.90)(CP -15%)
55.02
-
929.8
Providing and fixing ceramic tiles/ anti skid tiles of size 400mm x 400mm of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles.
Note: Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO (HSR 14.91)(CP -15%)
249.33
-
624
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacture) of approved make in all colors, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thic bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete.(HSR 14.92 b) (CP 0%) size of ceramic Glazed tiles 300mm X 450 mm
333.12
-
648.15
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required
finish complete. HSR 16.1 CP 230%
258.35
-
4.6
Applying pink primer or aluminium priming ocat on wood work including preparation of surface, Knotting and stopping etc. HSR 16.2 (CP 230%)
258.35
-
3.75
Painting two coats excluding priming coat
with synthetic enamel paint in all shades
on new wood work or matallic or plastered
or concrete surfaces to give an even
shade. HSR 16.3 CP 230 %
323.72
-
9.4
Applying priming coat with metal primer on new steel or iron work including preparation of surface. HSR 16.9 CP 230%
65.37
-
3.15
Distempering with washable oil bound distemper (of approved manufacture) two coats including priming coat on new work.(HSR 16.58)(CP 230%)
4257.87
-
9.1
Providing and applying two coats white cement based putty over plastered surface and grinding the surface smoothwith sand paper to get an even and smooth finish including cost and carriage of all metrial, labour charges, scaffolding, sundries etc. complete(J.K./Birla Cement). HSR 16.81 CP 230%
4177.21
-
11.35
Providing and fixing M.S.double acting spring hinges with necessary screws,etc., complete HSR 17.81 CP 300%
4
-
20.6
Factory manufactured solid flush door shutters, block board coer as [per IS No. 1659-1969 bonded with water proof type in phenol formaldehyde syntehtic resing, hot pressed conforming to Is 2002 part I and II fixed in posiiton including iron hinges, screws chocks/cleats and stops etc as per HSR 17.93 (CP 165%) i) 25mm thick
20.88
-
387.15
ii) 35mm thick
86.77
-
436.15
Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded buildt up standard tubular sections/approciate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screw or with fixing cilps or with expansion hold fasteners including necessary filling up of gaps at junstions at top bottom asn sides with required neoperne felt etc. Aluminium sections shall be smooth rust free straighty mitered adn jointed mechaniucally snap beading for glazing panefing CP brass stainless steel sorwer all complete Fixed portion (Anodized aluminium transparent or dyed to required shade according to Is; 1868 minimum anodic coating of grade AC15) powder coating of 50 micron. (HSR 17.95 + note (i))(CP 15%)
174.41
-
257.3
Providing & fixing aluminium work for done doors, windows, ventilators and partitions sections/appropriate Z sections and other sections of approved make conforning to IS;733 and IS;1285 fixed with rawel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top bottom, and sides with required neoprane felt etc. aluminium sections shall be smooth, rust free straight mitered and jointed mechanically whereever required including cleat angle, Aluminium snap beading for glazing/paneling CP brass/stainless steel screws, etc, complete shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprane gasket required including Aluminium fitting. (HSR 17.96) + note (CP 15%)
797.83
-
268.7
Providing & fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforning to IS;12823 grade 1 type II in paneling fixed in aluminium doors. Windows shutters and partition frames with c.p brass/stainless steel screws etc.complete. (HSR 17.97 B) (CP 5%) Pre-Laminated particle board with decorative lamination on both sides.
65.41
-
780.3
Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC/neiprene gasket etc. complete.(HSR 17.98) (CP 15%) (b) with float glass panes of 5.00mm thickness
174.67
-
700
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked for doors incl cost of cutting floors as required embedding in floors and cover plates with brass pivot and single piece MS sheet outer box. HSR 17.99 (cP 5%) (a) With Stainless steel cover plates
10
-
1674.5
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12) (CP 500%)
20.66
-
1040.35
Supplying, hoisting and placing in position tubular trusses including runners, purlins, consisting of steel tubes conforming to I.S. specifications of tested quality duly welded with fillet welds 6 mm thick through-out including wind bracing. Open end of pipe sealed with 3 mm thick plate including the cost of nuts and bolts
where bolts connections are specified at flange joints including one coat of ready mixed red oxide zink cromate primer of approved quality assembling and fixed in position complete in allrespect. HSR 18.14 CP 500%
0.34
-
1283.15
FE-500 EQR TMT steel bars for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in positon complete. (HSR 18.22 CP ) (CP 500%)
1237.21
-
927.05
Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, or approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:-as per HSR 18.34 (d) (C.P. @ 500%) (b) door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate
341.52
-
58.6
(c) door and window frame size 127 mm X 50 mm with 40 mm wide double rebate
626.03
-
76.8
d) door and window frame of size 114 mm X 50 mm with 35 mm wide double rebate.
464.67
-
69.75
Stair case railing of 40 mm internal
dia G.I. pipe class 'B' as per I.S. No.
1239 as hand rail using flats and
square bars as supporting members
and base plate welded as per design
specified including cutting, welding
rods and complete fixed in position HSR 18.13 a CP 500%
6.66
-
1157
Parapet railing of 40 mm internal dia
G.I. Pipe class 'B' as per I.S. No.1239
as hand rail using flats and square
bars as supporting members and
base plate welded as per design
specified including cutting, welding
rods and fixed in position complete in
all respect. HSR 18.13 b CP 500%
1
-
1231
(TOTAL) (HSR) (CIVIL)
-
-
-
DSR (CIVIL )
-
-
-
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with ( DSR 2016/11.23.5) 11.23.5 Udaipur green marble
68.28
-
1589.4
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), Transparent or Dyed to required colour or shade ,with nuts and screws etc.complete in all respect. DSR/2016/9.96 300X16mm
13
-
212.45
250X16mm
37
-
189.2
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. DSR/2016/ 9.100 9.100.2) 100mm
63
-
45.1
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. DSR/2016/9.97 9.97.3 ) 200x10 mm
76
-
76.15
9.97.4) 150x10 mm
166
-
64.3
9.97.5) 100x10 mm
126
-
49.2
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws complete. DSR/2016/9.101 9.101.2) Twin rubber stopper
47
-
38
Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete. DSR/2016/9.114 9.114.2) Double strip (horizontal type)
20
-
21.5
Total DSR (CIVIL)
-
-
-
NS (CIVIL)
-
-
-
Providing and Fixing Chicken Mesh/Fiber Mesh Jali ((polymer) Jali ( app. 2.0 kg per 200 sft ) with nail and washer on wall, columns and beams etc before applying plaster to avoid cracks at junction and intermediate of wall complete in all respect
3174.55
-
42
Providing and Applying 12mm thick Av. Premixed formulated one coat Gypsum Light weight plaster having additive as light weight aggregates as bermiculite/Perlite respectively conforming to IS :2547 (Part 1 and 2) 1976 applied on AAC Block wall finished in smooth line and level etc.complete for any height. NS DSR 2016/13.78
4257.87
-
217.35
Finishing wall with acrilic smooth exterior paint of reputed shade new work:- two or more coat applied @ 1.67 ltr. 10 sqm over and i/c priming coat of exterior primer applied 220 kg/ 10 sqm DSR 2016/ 13.46.1
2481.89
-
96.05
Extra for granite, polishing over kota stone flooring and skirting instead of ordinary floor polishing complete in all respect.
248.25
-
49.5
Providing and fixing 25mm thick red sand stone finished both side for cup boards shelves and partition including slightly round edges complete in all respect
12.94
-
754
Provided and fixing stainless steel wire mesh jali of 304 grade (Heavy Gauge) in alumanium door &window in alumanium section including pvc/neoprone gasket &labour for fixing etc(excluding the cost of bidding,channel etc same will be paid in alumanium work. N.S
26.12
-
800
Providing and fixing of 18 mm thick granite stone in any colour (as approved by EEP) in 20 mm thick cement mortar 1:3
1.96
-
3041
Providing and applying 10 cm thick plaster or external surface with polymer modified ready mix plaster of fine grade part land graded sand and polymer with water soluble additives as per manufacture specification of approved make
2441.89
-
219
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), Transparent or Dyed to required colour or shade ,with nuts and screws etc.complete in all respect. NS 150X12mm
12
-
109.6
Providing and fixing aluminium handles, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), Transparent or Dyed to required colour or shade ,with nuts and screws etc.complete in all respect. NS 150 mmx12 mm
144
-
91.1
P&F powder coated aluminium Folding handle (collapsible handle) 100 mm NS
63
-
85
P&F powder coated Aluminium eye Hook NS
63
-
50.8
P&F in position 4 peg coat hook with screws complete in all respects NS
8
-
75.7
Earth filling with earth brought from out side including rolling , watering , ramming and compaction complete in all respect for irrespective lead and lift complete in all respect.
5429
-
189
Providing and fixing mumty door consisting of mild steel angle iron frame 35x35x5mm cross bracing 20mmx5mm @ 4 nos each side and 2 nos MS flat 50mm x6mm and covered with MS sheet 16 guage including locking arrangement(with sliding bolt and tower bolt) with chowkhat frame 40x40x5mm complete in all respects as per direction of Engr-in-charge..
87.23
-
74.35
Extra for providing both edge moulding of granite stone 18mm thick i/c machine polishing to edge compelte in all respect.
8.89
-
85
Providing and laying in position Rustic tiles of size 300mm X 300mm of approved make over 20 mm thick cement sand mortar 1:3 and sand filling of joints with matching pigment complete in all respects.NS
13.66
-
866
Providing and fixing SS 20mm dia hanging rod of heavy approved shape and design with C.P. steel brackets & screw complete in position. (Ovel Shape) NS
12.34
-
272
Chase cutting in brick work size 150mm high for flushing of skirting with wall plaster complete in all respect as directed by Engr-in-charge NS
599.19
-
26.45
Providing and fixing aluminium door lock (boss) incl screws (heavey duty) complete in all respects NS
5
-
420
Supplying and filling concrete admixture complete in all respect(Fosrock,pedlite,Ballendura)NS
3194.35
-
55.86
(TOTAL NS) (CIVIL)
-
-
-
P.H. (HSR PART)
-
-
-
ECAVATION FOR PIPELINES RUNNING UNDER RESSURE IN TRENCHES AND PITS, IN OPEN AREAS, WHERE DISPOSAL OF SURPLUS EARTH IS DONE ALONGWITH THE ALIGNMENT including trimming & dressing sides, leveling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc., refilling consolidation and entering of refill, in 15 cm layers AND RESTORATION OF UNMETALLED OR UNPAVED SURFACE TO ITS ORIGINAL CONDITION, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fenching etc., and outside the town in ORDINARY SOIL :-HSR 6.8 (a) CP 370%
(a) Without timbering and shoring upto 1.5 metress depth
49.03
-
1030
Excavation of trenches in streets, lanes or in Open areas for storm sewer, sewers running by Gravity nd manholes to full depths as shown In drawings including shoring timbering of Poling boards, frame System type, dressing to correct Sections and dimensions, according to templates and levels, Dewatering, provision for diversion of traffic, cutting trees and Bushes etc. Night signals, profiles, pegs, sight rails, oning rods,Crossing over trenches for access to the houses, watching fencing, Etc., fixing and maintenance of caution boards, refilling of trenches, Watering of refill, in 15 m layers, ramming and restoration of Unmetalled or unpaved surface to original condition and removal Of surplus soil from site of work, upto a lead of 1 Km in ordinary soil. (HSR 6.10.) (CP 370%)
147.2
-
1919
Cement concrete 1 : 2 : 4 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.41) (CP 450%)
23.75
-
615.6
CUTTING HOLES UPTO 23 CM SQUARE THROUGH BRICK WORK IN MUD WALLS FOR PIPES AND MAKING GOOD INCLUDING REPOINTING REPLASTERING AND FINISHING according to existing finish where required. (HSR 28.24) (CP 300%) a) 11.43 cm thickness of walls
27
-
14
b) 22.86 cm thickness of walls
40
-
20.35
Masonry Chambers.
CONSTRUCTION BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement mortar 1:5 LIMECONCRETE with 40 percent lime mortar 2:3 in foundation cement concrete 1:2:4 BENCHING 12mm THICK CEMENT PLASTER 1:2 with a floating coat of 1mm thick of neat cement, R.C.C.1:2:4 SLAB 100mm THICK /C.C.TOPPING 50 mm THICK WITHOUT 455 MM x455MM/455MMx610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME weight as per I.S.I. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design but incl SFRC frame and cover as directed by engr-in-charge . (HSR 29.84 b) 450% Size 450 mm x 450 mm inside (without455 mm x 455 mm cover and frame light duty single seal pattern I weighing 20 kg with C.C.topping )
14
-
414
Size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame light duty single seal pattern I weighing 38 kg with C.C.topping )
4
-
582
(c ) Size 600 mm x 900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping )
7
-
690
Providing & fixing SFRC manhole covers and frames marked with IS: 12592 including setting the same to correct lines and levels in 1:2 cement sand mortar over manhole including carriage loading, unloading stacking handling, rehanding etc. Complete in all respects to the satisfaction of engineer-in-charge. HSR 29.94 CP 5%
Type: Extra Heavy duty Set (HD 20) 560 mm clear opening
20
-
1100
Providing, SALT GLAZED STONE WARE PIPES GRADE'A' IN STANDARD LENGTH OF 600 MM EACH PIPE MARKED WITH IS:651 and their lowering, cutting, jointing and testing as described in HSR item NO 29.38, 29.40 including the cost jointing materials as well as carriage, loading, unloading stacking, handling, re-handling etc complete in all respects to the satisfaction of Engineer-in-Charge. (HSR 29.95) (CP 5%) (b) 200 mm i/d
200
-
253
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF TWO URINALS FLAT BACK OR ANGULAR LIPPED FRONT 610 HIGH IN VITREOUS CHINA-WARE WITH 5 LITRES CAPACITY BEST INDIAN MAKE C.I. AUTOMATIC FLUSHING CISTERN WITH FITTINGS AND FLUSH PIPE ETC., COMPLETE AS FULLY DESCRIBED IN ITEM NO. 30.25 (d/r) (HSR 30.26) (CP 340%) Range of two urinals (I) White
1
-
1390.23
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF THREE URINALS LARGE FLAT BACK OR NGULAR LIPPED FRONT 610MM HIGH IN VITREOUS CHINAWARE WITH ONE NO. 10 LITRES CAPACITY BEST INDIAN MAKE
C.I. AUTOMATIC FLUSHING CISTERN WITH FITTINGS AND FLUSH PIPE
ETC.COMPLETE as fully described in item no.30.25 (d/r) (HSR 30.27) (CP 340%) Range of three urinals (I) White
1
-
1995.65
PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; R.S or C.I BRACKETS for building into wall including Painting; 32 mm C.P BRASS WASTER WITH C.P brass chain and rubber plug; 15 mm C.P BRASS SCREW DOWN PILLAR TAP WITH Jamnuts or couplings best design ( as approved by the Engineer- In-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC.(HSR 30.41(a)(iv)) Size 550 mm x 400 mm with one no. tap (CP 340%)
8
-
407
Providing and fixing in position best Indian make Pedestal fittings of vitreous chinaware complete (as required by the Engineer-in-charge) (HSR 30.44) 340%
8
-
279
PROVIDING AND FIXING IN POSITON BEST INDIAN MAKE CHROMIUM PLATED BRASS 2ND TRAP FOR LAVATORY SUITE. (HSR 30.45) (CP 340%)
6
-
92
Providing and fixing in position best Indian make towel rails fixed in with raw slugs embedded in walls with c.p brass screws. Complete in all respect including cutting and making good the walls etc. (HSR- 30.68 b(ii)) 340%
b) 20 MM DIA C.P BRASS ADJUSTABLE ii) 600 mm long.
8
-
57
PROVIDING AND FIXING LEAD INLET CONNECTION WITH BRASS UNION FOR FLUSHING AND WARNING PIPES COMPLETE IN ALL RESPECTS. (HSR 30.93(C ))(CP 300%) 15mm alkahene pipe inlet connection
24
-
10.5
CUTTING CHASE IN BRICK WALLS IN CEMENT OR IN FLOOR FOR EMBEDDING G.I OR H.C.I PIPE LINES AND MAKING GOOD THE SAME TO ITS ORIGINAL CONDITION (HSR 30.95(C ))(CP 340%) Size 75 mm x 50 mm
210.91
-
4
PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS (HSR 30.110(b)(CP 340%) (b) WITH PLASTIC BALL (ii) 20 mm internal diameter
8
-
48
PROVIDING AND FIXING IN POSITION GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 KG AND FRAME CLEAR OPENING 300 MM X 300 MM and outside size 330 mm x 330 MM AND CHAMBER INCLUDING cost of all brick work in CEMENT MORTSAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS AND CEMENT CONCRETE 1:2:4 IN COPING around C.I cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I work AS PER STANDARD DESIGN,.excluding CI cover but incl SFRC frame and cover, minimum depth of water should be 150 mm with a minimum seal 50 mm (HSR 30.114) (a) (CP 340 %) 100 mm internal diameter S.W. gully trap
15
-
166
Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Enginer in charge. (HSR 30.119) (CP 0%) 1000 Ltrs
6
-
5263
Total HSR(PH)
-
-
-
DSR (PH)
-
-
-
Providing, fixing and testing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. ( DSR 2016/18.10) 18.10.1) 15mm dia nominal bore
71.6
-
186.4
18.10.2) 20mm dia nominal bore
221.49
-
224.15
18.10.3) 25 mm dia nominal bore
21.87
-
247.85
18.10.5) 40mm dia nominal bore
234.41
-
394.15
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :DSr/2016/18.46 18.46.2) 20 mm nominal bore
10
-
170.95
18.46.3) 25 mm nominal bore
3
-
205.8
18.46.5) 40 mm nominal bore
19
-
298.75
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR/2016/17.28 17.28.1 Semi rigid pipe 17.28.1.1) 32 mm dia
23
-
75.6
Total DSR (PH)
-
-
-
(NS) P.H. WORKS
-
-
-
Providing and fixing gate valve with c.i wheel fof approved quality complete in all respect. NS 20 mm dia i/d
9
-
396.55
25 mm dia i/d
2
-
428.2
40 mm dia i/d
10
-
500.75
P/F in position 15 mm C.P. extension nipple N.S. DSR 2016/ 18.75.1
129
-
28.85
P/F C.P. Flange of required dia N.S.
86
-
25
P & F water closet fitting ( indian type WC pan) with 100 sand cost p.or S trap, 10 ltr, with manually controlled device / handle lever, conferming to IS 7231, with all fitting and fixture comple i/c cutting and making good the walls and floors where ever or required DSR 2016/17.1.6 white uifre china orissa pattren wc pan of size 580 x 440 mm with integral type rest
2
-
3494.2
Providing and Fixing white vitrous china extended wall mounting water closet of size 735*350*655 mm of approved shape including providing & fixing white china cistern with dual flush fitting, of flushing capacity 3ltr/6ltr. Including seat cover and cistern fittings , nuts , bolts and gaskat i/c Jet complete NS
12
-
9685.7
P & F stainless steel of IS 304 ( 1818) kitchen sink as per is 13983 with CI breckets and stainless steel plug 40 mm, i/c painting of fitting and brckets, cutting making good the walls whereever required. DSR 2016/17.10.1 kitchen sink with drain board 17.10.1.3 510mm x 1040mm bowel depth 200 mm
2
-
3772.35
Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) (c ) Bib cock (Jaquar Make Cat No. SQT-511)
10
-
656
(c) Long body (Jaquar Make Cat No. SQT-512)
24
-
864
Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) (a) 15MM STOP COCK (I) Stop cock male and female end (Jaquar Make Cat No. SQT-526)
43
-
608
(ii) concealed stop cock with flange (Jaquar Make Cat No. SQT-514 E)
14
-
816
P/F in Position 6 mm thick looking mirror with screws i/c cost of synthetic wood beading of brawn water proofing ply of 6 mm thickness complete in all respects NS
9.75
-
2035
P&F Oval shaped under / over counter Wash basin make CERA incl cost of 32 mm dia CP waste or as specified by engr-in-charge complete in all respects NS
6
-
2061
Providing and fixing in position CP Swan Neck pillar cock on Wash basine i/c making hole in slab/marble Make: Jaquare Continental Model No 167KND NS
6
-
1340.9
Providing and fixing CP shower of Jaquar make Model No. 497N ALIED or equovalent as per approved makes complete in all respects as per appved by Engineer-in-Charge..
8
-
3410
Providing and fixing soap dish Jaquare make Cat. No. 1177 N or equovalent as per approved makes complete in all respects as per appved by Engineer-in-Charge. NS
12
-
619
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS 18" Jaquar Make Cat No. AEC-1111B FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC.
8
-
738
P/f in position CP jali (greating) app make complete in all respect NS
36
-
200
Pdg. & fixing SWR PVC pipe classic type ‘B’ and specials ISI marked (Kissan, Prince, Finolex, Ravindra make) including fitting joint solvent mixture i/c rubber ring complete in all respect- a) 110mm dia
82.32
-
315.95
b) 90mm dia
103.73
-
261.3
Specials for 110mm dia pipe i) Cowel
3
-
29.25
ii) Clamp
5
-
28.8
iii) Plain Bend
30
-
151
iv) P-trap
1
-
269
v) socket
35
-
86.55
vi) single junction with door
5
-
238
b) 90mm dia pipe i) Cowel
3
-
25.4
ii) clamp
5
-
28.8
iii) Bend
15
-
90.95
iv) socket
37
-
72.9
v) single junction with door
24
-
141.15
vi) Floor trap
16
-
108.85
Providing & stringing out D.I. pipes 100 mm dia and specials laying the same in trenches to correct alignment and gradient i/c cutting, jointing and testing complete in all respect NS
167.64
-
1616
Water proofing of the roof with SIKA Cemcrete including cleaning the surface, filling of joints & gaps, with slurry using water proofing compound SIKA CEM, making of Polymer, rich gola, from out side at the vertical and horizontal joints, applying 1st coat of SIKA CEMCRETE with fibermesh and 2nd coat SIKA CEMCRETE (Acrylic polimer UV resistant coating) on the roof and both rooms. NS
108.8
-
254
Extra for making hole in working slab in kitchen for gas pipe etc including finishing complete. NS..
2
-
46
Making and cutting hole 100 to 125 mm dia in RCC through core cutter machine complete in all respects or as specified by Engr-in-charge.
13
-
689.6
Providing and fixing M.S. fastener 10 mm dia for holding vertical pipe clamps complete as directed by Engr-in-charge
144
-
22.8
Providing and fixing zinc coated clamp 75 to 110 mm dia i/c cost of 12 mm screwed GI rod and fastner in RCC roof complete in all respects NS
15
-
222.5
(TOTAL) (NS) (P.H.)
-
-
-
Road and parking HSR
-
-
-
Cement concrete 1:4:8 with stone aggregate 40 mm Nominal size in foundation and plinth (HSR 10.39 (CP 450%)
127.35
-
403.1
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. (HSR 10.132 + 10.95) (CP @ 450%)
127.35
-
729.3
Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed. (HSR 24.1) 370%
836.1
-
92.45
TOTAL Road and parking HSR
-
-
-
Road and parking (NS)
-
-
-
Finsing of cement conret with vacume dewatering and fine trowel surface complte in all respect
836.1
-
61.75
Cutting groove in flooring in expansion joint 4mmx50mm size N.S
807.33
-
28
P &L at or near groung level factory made kerb stone of M.25 grade cement concrete in position to required line, level and curvature, jointed with cement mortar 1:3 i/c making joints with or without grooves (Thickness of joints except of sharp curve (Half not be more than 5 mm) i/c making drawing opening wherever required complete etc. as per direction of engineer-incharge(length of finished kerbs edging small be measured for payment) (Pre-last C.C kerb stones shall be approved by engineer -in-charge DSR 2016/16.69.
2.83
-
5017.65
TOTAL Road and parking (NS)
-
-
-
Landscaping & Park Development (NS)
-
-
-
Turffing a lawn with planting of selection NO. 1 grass (superior quality) with machinary i/c ploughing of land, levelling and dressing , applying farm yard mannure (as per norms) in 2.5 cm layer, application of insecticide/pesticide in safe guard aginst soft borne disease and maintenance for 12 months or more complete in all respects NS CSR 32.21 cP 15%
836.1
-
48.94
Providing and planting different types of plants including digging ,planting,watering, manure, fertillizing etc complete in all respects (i/c maintenance for 12 months). NS Bottle palm
10
-
1035
Cycus panda
10
-
18.4
Ficuss
8
-
229.9
Providing and fixing RCC bench with hand rest with back complete in all respects NS
4
-
6000
TOTAL Landscaping & Park Development (NS)
-
-
-
FIRE FIGHTENING (NS)
-
-
-
FIRE EXTINGUISER/ HAND APPLIANCES : Providing and fixing with brackets/ supports etc wall/ floor mounted fire extinguiser as pere detail given below ( Make: SAFEGUARD / LIFEGUARD/ OMEX/ FIREFITE/ AGNI) ISI Marked . ABC Powder stored pressure type fire Extinguisher with 4 kg capacity ISI marked
5
-
2851
Water CO2 type Fire Extinguisher with 9 lit capacity complete ISI marked
5
-
2422
Total FIRE FIGHTENING (NS)
-
-
-
E.I. (HSR) PART
-
-
-
Supply and erection of moulded case circuit breaker single pole/four pole on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.69) (CP 0%) iv) Four Pole MCCB 6 to 63 Amp
1
-
5152.5
v) Four Pole MCCB 100 Amp
1
-
5347
Supply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection:-(HSR 31.17) (CP 30%) a) Miniature Circuit Breakers of 9 K.A. breaking capacity i) SP MCB 6 amp. To 32 amp.
72
-
95
(iii) TPN 40 amp to 63 amp.
1
-
499
(iii) TP 40 amp to 63 amp.
1
-
377
Supply and erection of Fittings and Accessories (HSR 31.18) (CP 200%) xxvi) S/E of hexagonal M.S box 1.60 mm thick having each side 8 cms 7.5 cms deep top covered with M.S lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable Suspension hook and erected in R.C.C slab for erection of fan, the bottom covered with 3 mm thick bakelite sheet with suitable holes, Painting etc. complete with all labour and material required to complete the job.
82
-
26.3
xi) Bakelite angle/straight button holder Large size.
41
-
6.2
S/E of pipe for wiring purpose i/c bends inspection boxes etc., where necessary and painting as required (HSR 31.21) (CP 350%) xxx)S/E of PVC pipe of 6 kg pressure, laid 1 mtr. Below ground level complete i/c digging & reffling of trench with jointing extra (b) PVC pipe 80 mm dia.
150
-
42
iii) Earthing with G.I. earth plate 600 mm x 600 mm x 600 mm x 6 mm thick including accessories and providing enclosures accessories and providing enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
4
-
453
(v) Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode
4
-
186
(xv) Pdg. And fixing 25mm x 5mm GI strip on surface on in recess for connection etc. as required with all labour and material.
70
-
20.3
Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections.(HSR 31.26) (CP 140%) xlii) 35 sq mm, 4 Core armoured cable
40
-
65.8
xxviii) 70 sq mm, 3 ½ Core armoured, cable
150
-
100.3
Miscellaneous (HSR 31.35) (CP 130%) i) Supply and M.S. pipe (B-class) for suspension rod of ceiling fan including threading a) 15 mm dia
132
-
24.9
Supply and erection of PVC unsheathed copper conductor cable single core 1100V grade in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) (CP 10%) i) size 1.5 Sqm
5250
-
10.2
iii) size 4.0 Sqm
1780
-
24.5
vi) size 16 Sqm
300
-
83.7
Supply and erection of double door sheet enclosure distribution board suitable for MCB and ELCB etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. (HSR 31.41) (CP 10%) x) TP&N Distribution Board 4 Way (Vertical ) (4+12)
1
-
3850
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary conneciton, complete in all respect.(HSR 31.56) (CP 0%) Fan regulator
83
-
397
S/E of 50 mm dia 1.5 Mtr. long bracket (B class) making an angle 10 to 15 degree with horizontal plane for mounting street light fixing of GI braket on wall with 2 Nos. 50 mm x 3mm thick MS clamps i/c cost of cutting & Welding of G.I. Pipe complete with cement and sand mixture, nuts & bolts i/c necessary connection complete in all respect upto entire satisfaction of E-I-C of work.( HSR - 31.53 ) ( CP - 0% )
8
-
600
TOTAL E.I. (HSR)
-
-
-
E.I. (N.S.) PART
-
-
-
Wiring in 1.5 sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & outer face plates complete (Reccesed). (i) Fan Point :- (b) Medium point
22
-
500
(c) Long point
61
-
698
(ii) Light Point :- (a) short point
58
-
305
(b) Medium point
66
-
473
(c) Long point
125
-
671
(ii) T/C Light Point :- (b) Medium point
2
-
545
(c) Long point
4
-
782
VII) 5 Pin, 5 AMP plug point including earthing the 3rd pin with 1.5 sqmm copper insulatd earth wire (a) short point
17
-
463
(c) Long point
9
-
902
VIII) 5 Pin, 15 AMP plug point including earthing the 3rd pin with 1.5 Sqmm copper insulated earth wire & wiring with 4 Sqmm copper wire (c) Long point
44
-
1420
S/E of PVC conduit pipe ISI marked (heavy) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. a) 25mm dia recessed type
200
-
45
b) 25mm dia on surface
100
-
39
Supply and rection of vertical double door sheet enclosure distribution board (IP 43) suitable for MCCB as incomer recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. ii) 8 way, TPN (Vertical, MCCB provision for 100A-125A MCCB 4P and provision for 24 Nos. 6A-30A MCB SP as outgoings)
2
-
8940
S/E of 45 watt LED 6K, die cast aluminium street light luminaire with IP-65 Protection complete in all respect.suitable for operation on 230 volts A.C supply ( Havell's - Model - LHETAXU7PN6J045 or equivalent model of Bajaj/Crompton Greaves/ WIPRO/Philips/HPL/GE)
8
-
4578
S/Eof fresh air fans (Exhaust fan) 250mm sweep PVC body with louver shutter, suitable for single phase A.C. 230 Volts, 50 HZ supply complete with all labour and petty material required to complete the job.
13
-
1490
S/E of ISI marked propeller type ventilation fans (Exhaust fan) Size 300 mm, 1400 rpm Heavy Duty suitable for single phase A.C. 230 Volts, 50 HZ supply, A.C capacitor run conferming to IS:23/2/67 , complete with mounting ring with four no.s fixing holes without regulator as per rate contract specifications.with all labour and petty material required.( Havell's - Make & Model -Torboforce or Cormpton Greaves).
11
-
2995
Supply and erection of 300 mm aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm & blade thickness 0.80 mm) including all labour and other petty material required to complete the job. (Canon, National-Make)
11
-
592
S/E of water cooler of Stainless Steel body with 150 ltr /hr Cooling & 150 ltr. Storage Capacity ( USHA / SIDWAL/Voltas -make ) & water Purifier of 40 Ltr./ hr. Capacity ( KENT Elite make ) complete with all labour & petty material reqd. to complete the job. with R.O with 5 KVA stablizer copper wound(Microtek/Luminious
2
-
90000
S/E of 1400 VA Invertor ( Luminious / Microtek / Sukem make ) suitable for operation on single phase 230 volts, 50 HZ, AC supply with 2 nos 150 AH Exide batteries having warranty of 2 years i/c cost of trolly for batteries complete with all labour and petty material required i/c making necessary connections upto entire staisfaction of Engineer-in-Charge of the work.
2
-
30475
Supply and erection of surface mounting LED Batten fitting 1x 18/20 watt, (4 feet long), made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect. ( BAJAJ Model - BCLSB 18 W or Equivalent of other makes as per brand list
42
-
566
Supply and erection of surface mounting LED Batten fitting 1x 9/10 watt, (2 feet long), made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect. Bajaj/Crompton Greaves/ Havell's/Philips/ WIPRO/HPL ) ( BAJAJ Model - BCLSB 10 W or Equivalent of other makes ) as per brand list
16
-
442
Supply and erection of surface/ mounting, energy efficient LED 6000 K round luminaire, complete with diffuser, HF electronic driver and other material required to complete the job including fixing the same in false ceiling with required material & making necessary connections etc :- i) LED 36W surface mounting 2'x2' ( BAJAJ Model - BZSSQL 36W or above WH or equivalent of Crompton Greaves/ Havell's/Philips/WIPRO/HPL brands) as per brand list
22
-
3327
ii) LED 36Wor above recess mounting 2'x2' ( BAJAJ Model - BZRSQL 36W GZI or equivalent of Crompton Greaves/ Havell's/Philips/WIPRO/HPL brands) as per brand list
49
-
3112
iii) LED 15/18 W Square Fitting surface mounting (BAJAJ Model - BZSSQL 18W WH or equivalent of Crompton Greaves/ Havell's/Philips/WIPRO/HPL brands) as per brand list
45
-
1864
S/I/T/C of 1.50 TR Nominal Cooling Capacity high wall "split type Air- conditioning unit" of 3 Star rating model RSH318HBDW( Hitachi/O-GENERAL/DAKIN - Make) rated at 220 volts + 10%,single phase, 50 cycle per second electric supply and consisting of condensing and indoor unit,control panel of the unit, LCD Cordless remote, internal control wiring, thermostats, all accessories , without hard copper refrigerant & drain piping,Copper wound stabilizer 5 KVA ( Microtek/ Live Guard Luminius / Logicstate - Make) wall mount , MS stand and first charge of Gas & oil. The work should be completed in all respect including making repair of wall, floor and roof in original shape caused by making holes and chases etc.
2
-
44700
SITC of refrigerant piping made of good quality copper tube with insulation & drain pipe of required dia for 1.5 TR/ 2 TR cap Split Air-conditioner recessed in wall complete with all labour and petty material required to complete the job.
20
-
800
Supply & errection of ceiling fan w/o regulator complete with blades, canopies, shackles down rod suitable for AC 230 V, 50 HZ supply i/c erection charges with petty materials required to comlete the job. i) 1200 mm sweep (Havell's - Make & Model - ES-50, 5* rating or equivalent model of Crompton Greaves Make as approved by E-I-C of work ) model high breeze plus OR make as per brand list of HPHC
83
-
1300
TOTAL E.I. (NS)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements