Maharaja Agrasen Medical College Tender

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). HSR:6.16

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level HSR:6.33 Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6.33.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for HSR:6.30 6.30.3 Suspended floors, roofs, landings, balconies and access platform

Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: HSR:7.21 7.21.2 Cement mortar 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: HSR:11.9 11.9.1 1:4 (1 cement: 4 coarse sand)

12 mm cement plaster of mix : HSR:11.5 11.5.2 1:3 (1 cement: 3 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: HSR:6.1 6.1.1 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Supplying, assembling, lowering and fixing in vertical position in bore well Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. HSR:33.9 33.9.1 100 mm nominal size dia

Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. HSR:22.222 22.222.2 Single Socket Type B 22.222.2.2 110mm o/d SWR UPVC pipe lines laid complete

Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. HSR:21.84 21.84.1 Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping

Construction of rectangular standard brick masonry manhole chambers to standard drawings on S.W. pipe sewers or other circular pipe sewers up to the required depth in 1.5 cement sand mortar, lime concrete in bed and sides of pipe sewer and cement concrete 1:2:4 in benching, 12 mm thick water tight 1:2 cement sand plaster with a floating coat of neat cement and finished with 2 coats of sodium silicate on interior surface where required, reinforced cement concrete slab 180mm thick fixing 560 mm internal diameter C.I. manhole cover and frame weight not less than 2.5 quintal painted with 3 coats of black bitumen paint, fixing galvanised malleable iron steps embedded in 1:2 cement sand mortar complete. the rate covers the cost of M.S. steel for R.C.C. slab labour for fixing and carriage of C.I. manhole frame and cover and malleable iron steps from the stores of the Engineer-in-charge of the works to the site of works. The rate also include the cost of accurately planned and fitted centring, supports for all works as well as for all curves and special work, cleaning out their beds etc. sodium silicate shall be supplied free of cost at the stores of the Engineer-in-charge. HSR:21.90 21.90.1 On 100 mm internal diameter pipe sewer. 21.90.1.1 for 1.20 meters depth below ground level

Supplying, erection, testing and commissioning of Submersible motor pumping set non clog for sewerage having head 10.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) HSR:21.104 21.104.22 1300 LPM power capacity (BHP) 5

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : HSR:22.162 22.162.1 100 mm diameter 22.162.1.1 Class I

Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 : HSR:22.157 22.157.1 Up to 300 mm dia

Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : HSR:22.155 22.155.2 100 mm diameter pipe

150 mm diameter pipe HSR:22.155.4

Labour for cutting C.I. pipe with steel saw. HSR:22.156 22.156.4 150 mm diameter C.I. pipe

Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in fal respect. Make:- L&T, SIEMENS, BCH, SCHNEIDER. HSR:20.114 20.114.1 20 HP Motor

Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. HSR:24.5.1 24.5.1.5 Submersible Copper Cable 3 Core 10 sqmm

Providing & fixing GI pipe with complete GI fittings size 100mm dia (medium) B class complete in all respect. NS

Providing & fixing GI long bend 4" with flange complete in all respect. NS

Providing & fixing 110mm x 110mm x 50mm UPVC Tee 10 kg/cm2 complete in all respect. NS

Providing & fixing 50mm MTA complete in all respect. NS

Providing & fixing GI nipple (medium) 2" x 9" length complete in all respect. NS

Providing & fixing GI nipple (medium) 1.5" x 6" length complete in all respect. NS

Providing & fixing GI reducer 2" x 1.5" (medium) complete in all respect. NS

Providing & fixing 1.5" heavy duty handle valve GI complete in all respect. NS

Providing & fixing 1.5" GI socket complete in all respect. NS

Providing & fixing heavy duty 6" x 6" x 4" PVC Tee complete in all respect. NS

Providing & fixing 6" PVC joint with nut bolt complete in all respect. NS