Maharaja Agrasen Medical College Tender

Supply Installation Testing & Commissioning (SITC) of Type: Multi-Function Laser Printer with Scanner Monthly duty cycle/RMPV (pages): 200,000/5K-20K Print speed – simplex (A4, A3) Up to 41 ppm Scan speed – Black/Color simplex Up to 50/30 ipm Scan speed – Black/Color duplex Up to19/14 ipmScan-to destinations Email, Network folder, USB

Supply Installation Testing & Commissioning (SITC) of Barcode scanners- Applicable codes- Code 39,Code 128,Interleaved 2 of 5,Codabar,Code 93,UPC/EAN,Pharmacode Reading performance Scan mode Single line, fixed raster Scan rate Adjustable from 300 to 1,000 scans / s, default=500,Scan width angle 70°,Pitch ±50°,Skew ±40° Label contrast 25% min. at 650 nm Communications Interface RS-232, RS-422 / 485, USB Protocols Point-to-Point, Point-to-Point w / RTS / CTS, Point-to-Point w / XON / XOFF,Point-to-Point w / RTS / CTS & XON / XOFF, Polling Mode D, Multidrop,User Defined, User Defined Multidrop, Daisy Chain I / O specifications Trigger input 3 to 24 V rated (1 mA at 5 VDC) New Master 3 to 24 V rated (1 mA at 5 VDC) Outputs (1, 2, 3) 5 V TTL compatible, can sink 10 mA and source 2 mA Beeper Good read, Match/Mismatch, Noread On / Off LEDs 1 status, 1 power, 5 read performance (representing percentage of good decodes)Power requirement 5 VDC±5%, 200 mV p-p max. ripple, 260 mA at 5 VDC (typ.)Laser light Type Semiconductor visible laser diode (650 nm nominal)Safety class IEC 60825-1 Class II, 1.0 mW max.Environmental specifications ambient temperature range Operating: 0 to 50°C, Storage: -40 to 75°C Ambient humidity range Up to 90% (with no icing or condensation) Operating life 40,000 hours at 25°C Degree of protection IP54 (category 2) Weight Standard Approx.106 g Right Angle Approx. 136 g

Supply Installation Testing & Commissioning (SITC) of Barcode printer-Resolution 203dpi/ 8dots per mm Memory 8MB Flash, 8MB SDRAM (standard) Print Width 4.09”/ 104mm Print Length 39”/ 990mm Print Speed 5”/127mm per second Media Sensors Standard: Fixed reflective and transmissive sensors Media Width 0.75”/ 19.5mm to 4.49”/ 114mm Media Length 0.25”/ 6.5mm to 39”/ 990mm Maximum Media Roll Size 5”/ 127mm O.D. on a 1”/ 25.4mm, 1.5”/ 38mm I.D. core Media Thickness 0.003”/ 0.08mm ~ 0.007”/ 0.18mm Media types Roll-fed or fan-fed, die cut or continuous direct thermal labels with or without black mark, tag stock, continuous receipt paper, wristbands, and optional liner-free direct thermal media Ribbon Outside Diameter 2.6”/ 66mm (300m); 1.34”/ 34mm (74m)Ribbon Standard Length 984’ (300m); 244’ (74m) Ribbon Width 1.33”/ 33.8mm ~ 4.3”/ 110mm Core I.D. 300m ribbon 1”/ 25.4mm , 74m ribbon 0.5”/ 12.7mmOperating Humidity: 10% ~ 90% non-condensing R.H Storage Humidity: 5% ~ 95% non-condensing R.H. Agency Approvals TUV-R NRTL, TUV-R CB, NOM, KCC, CE, FCC Class-B, 2Dimensional Codes: Codablock (ZPL),Code49(ZPL),DataMatrix,MaxiCode,QRCode,PDF417,MicroPDF417, Aztec (For EPL and ZPL except where noted) Communication Interface RS-232 Serial interface, USB V1.1 interface, bi-directional