Haryana Urban Development Authority Tender

4/11.6) 15 mm cement plaster of mix of single or half brick work of mix. 11.5.4 1:4

5/6.1) .1 Providing and laying in position cement concrete 6.1.1 1:1/1/2:3 3cum graded stone aggregate 20mm nominal size

6.1.6 1:4:8 stone aggregate 40mm nominal size

6/6.33) Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 6.36.1 Thermo-Mechanically Treated bars of grade Fe- 500D

7/ 6.14 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: 6.14.1 1 : 1. 5: 3 ( 1 cement : 1. 5 coarse sand (zone-Ill): 3 cum graded stone aggregate 20 mm nominal size)

8/3.21) Supply & fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm & Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets & screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1 :2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge. 13.21.2 Door Frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutter

9/10.67 Providing and fixing ceramic & Glazed tiles/ vitrified tiles/ of any size of sqm 441 955 1396 approved make in floors / dados, laid in any pattern as specified over base of 3 mm thick adhesive of reputed brands as per IS specification 15477-2004 using 5 Kg. adhesive per sqm area of tiles and jointed with white cement slurry mixed with pigment to match the shade of tiles excluding cost of tiles 10.67.2 Size of Tile 600x600 mm

10/9.17 Providing gola 75x75 mm in cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design : 9.17.1 In 75x75 mm deep chase

11/9.10 Painting top of roofs with bitumen of approved quality @ 17kg per 1O sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete 9.10.1 With residual type petroleum bitumen of grade VG 10

12/9.11) 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1: 1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1 :3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: 9.11.1 With common burnt clay non-modular brick tile of class sqm designation