Haryana Tourism Corporation Limited Tender

SITC of HT Panel with one Incomer and 2 O/G complete in all respect.

MAIN LT PANEL as per IEC 61439 PTTA as per technical specifications below : Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchboard suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing, SPD Provision which connected to the nearest earth grid. SECTION-01 INCOMER : 2000A TP+NL 50kA ACB x 2Nos., 1600A TP+NL 50kA ACB x 1 No. BUS BAR : 2000 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.6 sq. mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. BUS COUPLER : 1 x 1500A 4P 50kA ACB OUT GOINGS : 800 A 4P 50kA ACB x 1 No., 630A FP 25kA MCCB x 2 No., 400A FP 25kA MCCB x 1 No., 250A FP 25kA MCCB x 3 Nos., 160A FP 25kA MCCB x 1 Nos., 100A FP 25kA MCCB x 4 Nos., 40A FP 25kA MCCB x 1 No., 25A FP 25kA MCCB x 1 No.,

DG Panel (DG Synchronizationl Panel) as per IEC 61439 PTTA as per technical specifications below : Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchboard suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing, SPD Provision which connected to the nearest earth grid. INCOMER : 1600A, & 800A 50kA Air Circuit Breaker BUS BAR : 2500 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.6 sq. mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. BUS COUPLER : 1 x 2500A 50kA 4P ACB OUT GOINGS : 3 X 1600 AMP 4P 50kA ACB