Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Haryana Police Housing Corporation Limited

Panchkula, Haryana

  • Opening Date

    09 Sep 2019

  • Closing Date

    24 Sep 2019

  • Tender Amount

    ₹ 87,13,417

  • EMD

    ₹ 1,74,000

Are you Looking for Joint Venture Partners, Contractor Consortium, Back-to-Back Contractor, Project Financier?
We will help you to find the right match for FREE.
Summary

Construction Of Mitr Kaksh In Police Station Ladwa, Babain And Shahbad Markanda In Distt Kurukshetra.

Don't have sufficient eligibility, BG funds or resources?
We will help you to find the right match for FREE.
BOQ Items
ItemQuantityUnitsRateAmount
... more
HSR Items
-- -
... more
Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. HSR 6.6 + CP 425%
267per 100 Cum- 15568
... more
Excavation of trenches in streets, lanes or in Open areas for storm sewer, sewers running by Gravity nd manholes to full depths as shown In drawings including shoring timbering of Poling boards, frame System type, dressing to correct Sections and dimensions, according to templates and levels, Dewatering, provision for diversion of traffic, cutting trees and Bushes etc. Night signals, profiles, pegs, sight rails, oning rods,Crossing over trenches for access to the houses, watching fencing, Etc., fixing and maintenance of caution boards, refilling of trenches, Watering of refill, in 15 m layers, ramming and restoration of Unmetalled or unpaved surface to original condition and removal Of surplus soil from site of work, upto a lead of 1 Km in ordinary soil. HSR 6.10(a) + CP 370% (a) For depths of excavation not exceeding 3 metres, from ground level. (Excluding side shuttering etc)
23per 100 Cum- 2146
... more
Cement concrete 1 : 8 : 16 with stone aggregate 40 mm nominal size in foundation and plinth. HSR 10.28 CP 450%
-cum- 1052
... more
Cement concrete 1 : 6 : 12 with stone aggregate 40 mm Nominal size in foundation and plinth. HSR 10.32 + CP 450%
83Cum- 159053
... more
Cement concrete 1 : 4 : 8 with stone aggregate 40 mm Nominal size in foundation and plinth. HSR 10.39 CP 450%
172cum- 383106
... more
Cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth. (under tile flooring) HSR 10.41 CP 450%
6Sqm- 23260
... more
Cement concrete 1 : 1 ½ : 3 with stone aggregate 20 mm nominal size in foundation and plinth. HSR 10.42 CP 450%
12cum- 47988
... more
Cement concrete 1:1 ½:3 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level. HSR 10.60 CP 450%
1Cum- 5613
... more
Pre-cast cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface indluding from work, placing and fixing in position, complete at the ground level or in first storey.HSR 10.77 + 10.95 (a) CP 450%
14cum- 82208
... more
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. HSR 10.81 + 10.95 (a) + CP 450% 1st storey
3Cum- 17754
... more
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects.extra over Item Nos. 10.79 to 10.94, if 1:1 ½:3 mix is used, instead of 1:2:4 HSR 10.82 + 10.95 (a) + CP 450% 1st storey
59Cum- 357626
... more
Cement concrete 1:1 1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects.extra over Item Nos. 10.79 to 10.94, if 1:1 ½:3 mix is used, instead of 1:2:4 HSR 10.86 + 10.95 (a) + CP 450% 1st storey
17Cum- 114548
... more
Damp proof course 25 mm thick of cement concrete 1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded. HSR 10.115- Note CP 450%
50Sqm- 4973
... more
First class brick work laid in cement sand mortar 1:6 in foundation and plinth. HSR 11.2 + CP 600%
83Cum- 229861
... more
First class brick work laid in cement sand mortar 1:4 in foundation and plinth. HSR 11.4 CP 600%
117Cum- 349709
... more
First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinthlevel. HSR 11.7 + CP 600% 1st storey
73Cum- 212103
... more
2nd storey
36Cum- 107298
... more
First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. HSR 11.9 CP 600%
5Cum- 15814
... more
11.43 cm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth. HSR 11.47 CP 600%
20Sqm- 7404
... more
11.43 cm thick brick wall laid in cement, sand Mortar 1:4 in super structure. HSR 11.48 (a) + CP 600% 1st storey
257Sqm- 99256
... more
11.43 cm thick brick wall laid in cement HSR 11.48 (a) + Note (iv) (a) CP 600%
24Sqm- 9440
... more
Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plster 1:4 or pointing, as required. HSR 11.78 CP 600%
244Rmt- 12339
... more
Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm, laid over 87.50 mm mud filling, on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles including two coat of bituman @ 1.65 kg per sqm on top surface of slab grouting with cement sand mortar 1:3 and top surface to be left clean. HSR 13.13 + CP 600% 1st storey
347Sqm- 128708
... more
Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 HSR 13.50 + CP 240%
6Nos- 251
... more
Cement concrete 1:1.5:3 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified. HSR 13.64 + CP 240%
592Mtr- 12138
... more
Providing and fixing PVC Rain water pipe 6kg Pressure of IsI mark in cement mortar during masonry work. HSR 13.89 CP 20% b) 150mm dia PVC pipe 6kg pressure
21Rmt- 8677
... more
Providing and fixing PVC bend ISI mark. HSR 13.90 (a) CP 20% b) 150mm dia PVC bend
12Each- 2382
... more
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595 x 595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance?85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6&7) in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @ 120gsm) comprising of main T runners of 15x32 mm of length 3000mm, cross T of size 15x32mm of length 120mm and secondary intermediate cross T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm suspended from ceiling using galvanized mild steel item (galvanized @ 80 gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod up to 1000 mm length and L shape level adjuster of size 85x25x2mm, spaced at 1200 mm centre to centre along main 'T'. The system should rest on periphery wall / partitions with the help of GI perimeter wall angle of size 24x24x3000 mm made of 0.40mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre & 40 mm long dry wall S.S screws. The exposed bottom portion of all T- sections used in false ceiling support system shall be pre painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of Engineer In Charge. With or Without groves HSR 13.92 CP 10%
266Sqm- 205498
... more
Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. HSR 14.1 + CP 400% 1st storey
389Sqm- 71964
... more
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacture) of approved make in all colors, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thic bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. HSR 14.92 (b) + CP NILL% b) size of ceramic Glazed tiles 300mmx 450mm
121Sqm- 78906
... more
12 mm thick cement plaster 1:4 HSR 15.5 + CP 500% 1st storey
670Sqm- 51122
... more
2nd storey
126Sqm- 9758
... more
12 mm thick cement plaster 1:6, on walls HSR 15.7 + CP 500% 1st storey
298Sqm- 19053
... more
15 mm thick cement plaster 1:4 on the rough side of single or half brick wall HSR 15.10 CP 500% 1st storey
244Sqm- 22933
... more
2nd storey
126Sqm- 11993
... more
15mm thick cement plaster in 1:6 HSR 15.12 + CP 500% 1st storey
435Sqm- 34238
... more
10 mm thick cement plaster 1:4 HSR 15.52 + CP 500% 1st storey
315Sqm- 23984
... more
12 mm thick raised or sunk cement mortar band/drip course in cement mortar 1:4 HSR 15.78 CP 500%
243per metr per cm width- 437
... more
6 mm thick cement plaster 1:3 with floating coat or neat cement 1.5 mm thick and one coat of white washing on bearing of R.C.C slab. HSR 15.83 CP 500%
30Sqm- 2768
... more
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR 16.1 CP 230%
21Sqm- 325
... more
Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. HSR 16.2 CP 230%
21Sqm- 265
... more
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR 16.3 CP 230%
21Sqm- 664
... more
Applying priming coat on steel work consisting of genuine red lead mixed with linseed oil and turpentine oil in equal proportions. HSR 16.10 CP 230%
249Sqm- 4322
... more
Distempering with washable oil bound distemper (of approved manufacture) two coats on new work. HSR 16.58 + CP 230%
850Sqm- 25526
... more
Pdg. Two coats of exterior acrylic emulsion paint HSR 16.79(b) + CP NIL 1st Quality
1242Sqm- 60590
... more
Providing and applying two coats of white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. HSR 16.81 + CP 230%
2216Sqm- 83002
... more
Providing and fixing M.S. double acting spring Hinges, with necessary screws, etc., complete- HSR 17.81 (b) CP 300% b) 125 mm
6Each- 758
... more
Supplying and fixing hydraulic door Closer, I.S.I mark, with necessary Screws, etc., complete- HSR 17.82 + CP 300% C) I.S.I designation no. III (size of door 851 mm to 1000 mm)
3Nos- 2598
... more
Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) (a) commercial veneering with vertical grains or corss bands and face veneer on both sides commercial facing with laminated core and lipped edges:- HSR 17.93 (b) + CP 165% b) decorative veneering with vertical grains or corss bands and face veneer one side teak face and on the other side commercial facing edges lipped with commercial hard wood with laminated core:- i) 25 mm thick
17Sqm- 23320
... more
c) decorative veneering with vertical grain cross bands and face veneer on both sides teak facing and edges lipped with commercial hard wood with laminated core:- HSR 17.93 (b) (c) - Note + CP 165% iii) 35 mm thick
36Sqm- 59661
... more
P/F aluminium works for doors & windows ventilators & partition with extruded built up std. tubular sections / appropraiate Z section and other sections of approved make conforming to IS, 733 and IS :1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners i/c necessary filling up of gaps at junctions, at top, bottom and sides with reqd. neoprene felt etc. aluminium sections shall be smooth, rust free straight mitred and jointed mechanically wherever reqd. i/c cleat angle. Alumin snap beading for glazing / pancilling C.P. brass / stainless steel screws etc. complete. Shutters of doors, windows & ventilators i/c P/F hinges / pivots and making provision for fixing of fittings wherever reqd. i/c the cost of PVC / neoprene gasket reqd. i/c aluminium fitting HSR 17.96 + Note (i) + CP 15%
263Kg- 81383
... more
Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC / neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items.) HSR 17.98 (b) CP 15% (b) With float glass panes of 5.0 mm thickness.
17Sqm- 14176
... more
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS; 6315 marked for doors including cost of cutting floors as required embedding in floors and cover plates with brass pivot amd soingle piece MS sheet outer box. HSR 17.99 (a) CP 5% a) With Stainless steel cover plate.
3Each- 5275
... more
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. HSR 18.12 + CP 500%
62Qtl- 391442
... more
Fee-500 DSR /tor steel) bars for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in positon complete. HSR 18.22 + CP 500%
96Qtl- 539487
... more
Suppling and fixing glass panes including special metal sash putty of approved make HSR 18.30(b) + CP 500% (b) glass panes 4 mm thick
32Sqm- 22641
... more
Pressed steel sheet frams ( chowkats), consisting of 2mm thick steel sheet of the specified section, including iron lugs ( hold fasts), iron hinges , confirming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1;3:6 for filling in the frame, and cement conc. for lugs complete. HSR18.34 (a)(c) + CP 500% (a) 89mmx50mm with 40 mm wide single rebate.
93Mtr.- 40144
... more
b)door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate
53Rmt- 18913
... more
(c) door and window frame size 127 mm X 50 mm with 40 mm wide double rebate
287Mtr.- 132268
... more
Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed. HSR 24.1 CP 370%
1026100 Sqm- 4460
... more
Cutting holes upto 23cm through stone masonary or brick work in cement walls for pipesw and making good including repainting replastering and finishing according to existing finish where required. HSR 28.24 (b) + CP 300% b) 22.86 cm thickness of the walls
12Each- 977
... more
Providing and fixing steel bar embedded plastic steps of size 263x165 mm of orange colour, conforming to specifications, in pump chambers, manholes etc., having minimum 3mm thick Polypropylene polymer confirming to IS : 10910 encapsulated on 12mm dia ribbed steel bars per IS : 1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1:2:4 cement concrete including carriage, loading, unloading, stacking, handling, re- handling etc. complete in all respect to the satisfaction of Engineer in Charge. HSR 29.28 CP 120%
60Each- 11880
... more
EXTRA FOR EVERY 0.30 METRE DEPTH OF INSPECTION CHAMBER HSR 29.85 + CP 450% b) 450 mm x 600 mm
6rmt- 3399
... more
CONSTRUCTION OF RECTANGULAR STANDARD BRICK MASONRY MANHOLE CHAMBERS to standard drawings on S.W pipe sewers or other circular pipe sewers upto the required depth in 1.5 CEMENT SAND MORTAR, lime concrete in bed and sides of pipe sewer and cement concrete 1:2:4 IN BENCHING, 12 MM THICK WATER TIGHT 1:2 CEMENT SAND PLASTER WITH A FLOATING COAT OF NEAT CEMENT AND FINISHED WITH 2 COATS OF sodium Silicate on interior surface where required. REINFORCED CEMEN CONCRETE SLAB 180 MM THICK FIXING 560 MM internal diameter C.I. MANHOLE COVER AND FRAME WEIGHT not less than 2.5 quintal PAINTED WITH 3 COATS OF BLACK BITUMEN PAINT, FIXING galvanised Malleable IRON STEPS embedded in 1:2 cement sand mortar COMPLETE. HSR 29.90 (I) (a) CP 450% I) On 100 mm internal diameter pipe sewer a) for 1.20 metres depth below ground level
6Each- 71280
... more
EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid. HSR 30.13 CP 340% i) White plastic seat (Solid)
6Each- 5095
... more
PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of HSR 30.41 + CP 340%
-- -
... more
Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary;
-- -
... more
R.S or C.I BRACKETS for building into wall including Painting;
-- -
... more
32 mm C.P BRASS WASTER WITH C.P brass chain and rubber plug;
-- -
... more
15 mm C.P BRASS SCREW DOWN PILLAR TAP WITH Jamnuts or couplings best design ( as approved by the Engineer- In-charge)
-- -
... more
ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge.
-- -
... more
ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC.
-- -
... more
WHITE iv) Size 550 mm x 400 mm with one no. tap
6Each- 10745
... more
Providing and fixing in position best Indian make Pedestal fittings of vitreous chinaware complete (as required by the Engineer-in-charge) HSR 30.44 (i) CP 340% i) white
6Each- 7366
... more
PROVIDING AND FIXING IN POSITON BEST INDIAN MAKE CHROMIUM PLATED BRASS 2ND TRAP FOR LAVATORY SUITE. HSR 30.45 CP 340%
6Each- 2429
... more
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR Mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. HSR 30.71 (a)(i) CP 340% a) INDIAN MAKE i) 600 mm x 450 mm
6Each- 2825
... more
Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge)(a) Bib Cock long body HSR 30.75 (a) (c) + CP 340% (a) Bib Cock long body
6Each- 3062
... more
(c) Bib Cock (Short Body)
6Each- 2640
... more
Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) (a) 15mm stop cock HSR 30.76 (a) + CP 340% i) Stop cock male and female end
21Each- 9332
... more
PROVIDING AND FIXING LEAD INLET CONNECTION WITH BRASS UNION FOR FLUSHING AND WARNING PIPES COMPLETE IN ALL RESPECTS. HSR 30.93 (c) CP 300% c) 15 mm alkahene pipe inlet connection
15Each- 630
... more
PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS HSR 30.110 + CP 340% 20mm (b) WITH PLASTIC BALL
6Each- 1267
... more
PROVIDING AND FIXING IN POSITION GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 KG AND FRAME CLEAR OPENING 300 MM X 300 MM and outside size 330 mm x 330 MM AND CHAMBER INCLUDING cost of all brick work in CEMENT MORTSAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS AND CEMENT CONCRETE 1:2:4 IN COPING around C.I cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I work AS PER STANDARD DESIGN, minimum depth of water should be 150 mm with a minimum seal 50 mm. HSR 30.114 (b) CP 350% 100 mm internal diameter H.C.I gully trap
9Each- 8424
... more
P/F HDPE water storage tank of Sintex, Diplast, O.K., Supreme make with cover / lids marked with ISI 12701 on roof top of building i/c cost of hoisting and placing in position, making connections with inlet and outlet pipe, providing overflow and scour provision with suitable plug on scour pipe i/c cost of nipples, washers, flanges for connection in tank, complete in all respect. to thye satisfaction of the engineer in-charge HSR 30.119 + CP NiL% 500 Ltr
6Each- 16092
... more
Tootal HSR
-- -
... more
NS Items
-- -
... more
Earth Filling with the earth brought from outside the campus irrespective of any lead & lift, including laying, rolling, watering, raming & compaction complete in all respect & to the full satisfaction of engineer in charge.
409Cum- 102732
... more
Providing and fixing vetrified tiles of any size 600 x 600mm of approvd make in floors/dados, laid in any pattern as specified over base of 3mm thick adhesive of reputed brands such as Pidilite, Laticreto, Ferrouscrete and Ardexendure as per IS specification 15477-2004 using 5 Kg adhesive per Sqm area of tiles and jointed with 3mm space and will be filled with epoxy grout upto depth 5mm as Ferrouscrete, Laticreto,Ardexendure or Pidilite , RAK, NITCO, JOHNSON will be used(Double charged tiles shall be used as approved by Engineer in Chrge) The Agency will be submit bills in original alongwith the delivery of tiles to the Engineer in charge. RAK( Hyderabad, Plant), JOHNSON(Vijaywada plant) NITCO (NS), SIMPOLO.
290Sqm- 261666
... more
Providing and fixing granite stone in any shade 15 to17mm in flooring, skirting, steps, risers & treads, dado , shelves and counter top laid in any pattern as specified over 20mm thick cement sand mortor 1:3 as per drawing and directions of Engineer in charge complete in all respect.
207Sqm- 618353
... more
Providing and fixing in position structural glazing using powder coated aluminum entruded profile with 5mm thick toughened glass fixed by using double side tape silicone complet in all respect
65Sqm- 422069
... more
Providing and fixing entrance door of toughened glass 12 mm thick complete with S.S. patch fitting, long, handles of S.S and complete in all respect.
6Sqm- 36936
... more
Making Noising (Moulding) of Marble stone with Granite polish, complete as per design and drawing.
225Rmt- 28861
... more
Providing and Fixing precast pre-polished cement cocnrete tiles 300x300x25mm thick (NTC make) at plinth protection laid over 20mm thick base of ceemnt coarse sand mortar 1:3 with joints filled with white cement slurry mixed with matching shade.
298Sqm- 290657
... more
Making groove in double layered plaster of size 25mm x 12mm as per desiign complete in all respect.
197Sqm- 8620
... more
Providing and fixing wall face tiles of size 300 x 600 mm in any colours and shades in any pattern as specified over a base of 12 mm thick cement coarse sand mortar (1:3) & jointed with cement slurry mixed with pigment to match the shade of tiles to the entire Satisfaction of Engineer In Charge complete in all respect.
77Sqm- 80981
... more
Applying exterior primer on exterior surface of building for painting including the cost of primer, labour including complete
1912Sqm- 49147
... more
Providing rustic texture including the cost of primer, smoothening of surface, labour including complete
94Sqm- 74488
... more
Providing and fixing 6mm thick commercial plywood on existing press steel Chowkhats (2mm thick) with self drilling screw & aerolite over 4mm thick teak veneer with fevicol complete in all respect as per drawing & design to the satisfaction of Engineer in charge.
23Sqm- 75388
... more
Providing and fixing roller blind 100% black out thickness 0.55mm (P 0.05) complete in all respect.
64Sqm- 153203
... more
P & F stainless steel wire mesh jali of 22 gauge, clear aperture 1.4mm in 304 grade in aluminium door & window in aluminium section including PVC/Neoprone gasket & Labour for fixing including cost of MS Frame wire for SS Jali complete in all respect. (excluding the coast of beading, channel etc, the same will be paid in aluminium work)
22Sqm- 17712
... more
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR (2016) 10.28
200Kg- 94683
... more
Providing and fixing PU polish on veener flush door complete in all respect.
118Sqm- 132400
... more
Providing and fixing SS fittings complete in all respect. a) handle with lock (GODREJ MAKE)
21Each- 67977
... more
b) SS handles 6''
30Each- 7320
... more
c) SS tower bolt 6''
24Each- 1762
... more
c) SS tower bolt 8''
24Each- 1930
... more
d) Magnetic catcher
18Each- 965
... more
e) SS door stopper
21Each- 2529
... more
Providing & Fixing aluminium fittings for door and windows shutters with stainless steel or C.P brass screws of required size complete in all respect. tower bolt 100mm
108Each- 4698
... more
Handle 100mm
54Each- 2751
... more
Japaneese sheet a) Providing & fixing Sign board fabricated of with 2mm thick powder coated Japanese sheet (Rust free) 23'-6''x2'-0'' with 9''x3'' tubular sectrion with sheet on the backside, 4nos supports 9''x3'' (tubular section) 1'-9'' high & 2nos bracing on the back to support the frame against wind pressure. All the frames are of powder coated Japanese sheet & are duly welded & repainted with Decco sparay paint complete in all respct to the entire satisfacation of Engineer in Charge. (all the supports are to be embeded in concrete blocks as per design & drawing)
3Job- 118239
... more
b) Providing & fixing powder coated frame fabricated from 2mm thick Japanese Sheet 12''x3'' (fabricted tube) supported by 2nos of fabricated tube 9''x3''x2'-9'' high with 9'' extended on top duly welded & re painted with Deco spray paint complete in all respct to the entire satisfacation of Engineer in Charge. (all the supports are to be embeded in concrete blocks as per design & drawing)
3Job- 48927
... more
Providing & Fixing 25mm thick finished red sand stone both sides slightly rounded for partition and shelves in CB complete in all respect.
64Sqm- 48339
... more
Providing and fixing Unistone make Leo Paving 12''x12'' tile Regular colors laid in any pattern as specified over a base of 20mm thick cement sand mortar (1:3) & jointed with cement slurry mixed with pigment to match the shade of tiles flooring & skirting complete in all respect to the entire satisfaction of Engineer In charge.
150Sqm- 220889
... more
Providing and Fixing 2 mm thick plain fiber sheet in boundry wall with fixing of plain fiber sheet in position complete in all respect.
220Sqm- 177058
... more
Providing, Laying, Jointing, Fixing and testing of G.I pipe lines (medium) i/c cost of special Viz. Tees, Bends, sockets, elbows etc. & fixing of clamps complete in all respect a) 15 mm i/d of pipe line
45Rmt- 8145
... more
b) 20 mm i/d of pipe line
108Rmt- 24115
... more
c) 32 mm i/d of pipe line
33Rmt- 11424
... more
Providing & Fixing G.I Union complete in all respect. i) 20mm
9Each- 1125
... more
ii) 32mm
3Each- 705
... more
Providing, fixing & jointing gunmetal brass ball valve complete in all respect. i) 20 mm
3Each- 780
... more
ii) 32 mm
3Each- 1950
... more
Providing & Fixing SS sink 1mm thick with drain board, 304 grade, ISI marked, glossy with single bowl of size 600 x 450 x 210, complete. Model SBSD-09 of Jayana or equivalent complete in all respect.
3Each- 15411
... more
Providing and fixing 110mm dia SWR PVC type B class pipe complete with necessary solvent complerte in all respect. a) 100mm dia
52Rmt- 16625
... more
Providing and fixing 90mm dia SWR PVC type B class pipe complete with necessary solvent complerte in all respect. a) 90mm dia
43Rmt- 11407
... more
Providing and fixing Specials for 90mm dia pipe with Solvent Floor trap
6Each- 1200
... more
Providing and fixing in position best indian make Ist quality European wall hung water closet suit white colour with 10ltr capacity cistern complete with 100mm dia PVC bend and 32mm dia C.P flush valve with double push button & all other necessary fittings complete in all respect.
6Each- 48600
... more
Providing and fixing 32 mm dia PVC waste pipe complete in all respect
9Each- 540
... more
Providing and fixing in position GI HOOKS for GI Pipe line complete in all respect.
156Each- 1560
... more
Providing and fixing Jet spray approved make complete in all respect
6Each- 900
... more
Providing and fixing in position CP S.S jali of Heavy quality, 100mm dia of standard make approved by engineer in-charge complete in all respect. (make viking, chilly)
18Each- 3600
... more
Providing and fixing CP Brass extension Nipple, complete in all respect b) 15mm x40 mm
36Each- 1980
... more
Providing & fixing Towel Ring Round complete in all respect. (Make Jaquar AQN 7721)
6Each- 6879
... more
Providing & fixing Soap Dish complete in all respect (Make Jaquar AQN 7731)
6Each- 8388
... more
Total NS Items
-- -
... more
E.I HSR Items
-- -
... more
Supply and erection of moulded case circuit breaker on wall or on existing pedestal including bonding to earth and necessary connections:- (HSR 31.12.+C.P 60%) c) Moulded case circuit breakers ii) 100 amp. To 220 amp.415V 10 K.A
3Each- 20381
... more
Supply and erection of miniature circuit breaker/isolator 240/415V in the existing distribution board including making necessary connections:- (HSR 31.17 +C.P. 30%) a) Miniature Circuit Breakers of 9 K.A. breaking capacity ii) SPMCB 6 Amp to 32Amp
54each- 6669
... more
iii) TPN 40 A to 63 Amp
3each- 1946
... more
Supply and erection of Fittings and Accessories (HSR 31.18. +C.P. 200%) xi) Bakelite angle/straight button holder Large size.
36each- 670
... more
xxvi) Supply and erection of hexagonal M.S box 1.60 mm thick having each side 8 cms 7.5 cms deep top covered with M.S lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable Suspension hook and erected in R.C.C slab for erection of fan, the bottom covered with 3 mm thick bakelite sheet with suitable holes, Painting etc. complete with all labour and material required to complete the job.
18each- 1420
... more
Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required:- (HSR 31.21.C.P. 350%) xxx)Supply and erection of PVC pipe of 6 kg. Pressure, laid 1 metre below ground level complete, including digging refilling of the trench with jointing etc:- b) PVC pipe 80 mm dia
108mtr- 20412
... more
i) Earthing with G.I earth pipe 4.5 mm long and 40 mm dia with masonry enclosures on the top etc as required.(HSR 31.22 (i) +C.P. 350%)
3each- 5103
... more
ii) Extra for using salt and charcoal/coke for for pipe earth electrode as required.
3each- 1688
... more
xvi) Pdg. and fixing 4.00 mm dia G.I. wire on surface or in recess for loop earthing as required.
21mtr- 321
... more
Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections:- (HSR 31.26. +C.P. 140%) xl)16 sq mm 4 Core cable (armoured)
150mtr- 16848
... more
Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding the cost and erection of pipe. (HSR 31.40. +C.P. 10%) i) Cable size 1.5 sqmm (3/0.81 mm)
1080mtr- 12118
... more
iii) Cable size 4 sqmm (7/0.85 mm)
540mtr- 14553
... more
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (HSR 31.41.+C.P. 10%) 4-way, TP & N (Horizontal) (8+12)
3each- 5511
... more
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. (HSR 31.56. +C.P. Nil) 10 amp 1 way switch
45each- 3915
... more
10 amp socket
45each- 4770
... more
20 amp switch
15Each- 1740
... more
16 amp socket
15Each- 2475
... more
Fan Regulator
12each- 4764
... more
Blinking plate
39each- 975
... more
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. (HSR 31.57+C.P. Nil) 1 & 2 modules
24each- 2424
... more
3 modules
6each- 768
... more
12 Module
3each- 1008
... more
S/E ofISI marked DWC HDPE pipe laid 1 meterbelow ground level I /c digging and refilling of earth i/c cost of suitable size of ocket / coupler for HDPE pipe including the cost of all labour and petty material required to complete the job in all respect upto the entire satisfaction of E.I.C. of the work. (Dura line -make) (HSR 31.67.+C.P Nil) i) HDPE pipe 63/50mm outer dia/ inner dia.
150mtr- 14250
... more
Supply and erection of telephone wire 0.51 sqmm 2 pair DOT approved for telehone and inter communication sustem in existing pipe including all lablour and petty material required to complete the job in all respect. (HSR 31.78.+C.P. Nil) a) telephone wire u/a 2 pair
159mtr- 1265
... more
HSR Total
-- -
... more
DSR Items
-- -
... more
Supplying and drawing co-axial TV cable RG-6 grade 0.7mm solid copper conductor PE insulated , shielded with fine tinned copper braid and protected with PVC sheath in the existing surface /recessed steel/PVC conduit as required. DSR 1.19
66mtr- 2178
... more
Supplying and drawaing of UTP 4 pair CAT 6 LAN Cable in the existing surface /recessed steel /PVC Conduit as required. DSR 1.53.2 2 run of cable
159mtr- 13063
... more
Total DSR
-- -
... more
NS Items
-- -
... more
Wiring in 1.5 sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & outer face plates complete (recessed type). i) Fan point:- b) Medium point
15each- 7500
... more
c) Long point
9each- 6282
... more
ii) Light point:- a) Short point
24each- 7320
... more
b) Medium point
48each- 22704
... more
c) Long point
24each- 16104
... more
5 pin 10 amp plug point including earthing the 3rd pin with 1.50 sqmm copper insulated earth wire. a) Short point
18each- 8334
... more
5 pin 20 Amp switch & 16 Amp socket including earthing 3rd pin with 1.50 sqmm copper insulated earth wire (wiring with 4 sqmm copper wire) b) Medium point
3each- 3054
... more
c) Long point
27each- 38340
... more
S/E PVC pipe ISI Marked heavy guage i/c bend inspection box etc., i/c laying of pipe in slab or wall complete with all patty material required to complete the job in all respect.(Recessed type) ii)Size 25 mm dia
720mtr- 32400
... more
Supply and erection of A.C. Ceiling fan capacitor type with double ball bearing complete with capacitor, 300 mm down rod, canopies, shackle, three numbers blades made of aluminium alloy suitable for single phase, A.C. 230 V, 50 HZ supply Brand as per brand list of HPHC i)Size 1400 mm sweep
9each- 11610
... more
S/Eof fresh air fans (Exhaust fan) 250mm sweep PVC body with louver shutter, suitable for single phase A.C. 230 Volts, 50 HZ supply complete with all labour and petty material required to complete the job. (Havell's-Make & Model-Ventlair DX / Crompton Greaves-Make & Model-Brisk Air)
9each- 13410
... more
Supply and erection of modular type switch socket accessories on existing modular box b) Computer Jack RJ-45
12each- 4224
... more
c) Telephone Jack RJ-11
12each- 840
... more
S/E of Surface / recess mounting energy efficent LED 6000 K round luminare complete with diffuser HF Electronic driver suitable for single phase AC 230 Volts, 50 Hz supply complete in all respect. i) LED 34/36 W (2'x2') Bajaj BZRSQL36W GZI or equilent
45each- 140040
... more
ii) LED 18 W Square Bajaj BZRSQL18WWH or equilent
21each- 39144
... more
Supply and erection of copper refrigerant pipe for ac recessed in wall with PVC Copper wire 4 core 2.5 sqmm complete in all respect including all labour and petty material
120mtr- 96000
... more
Supply of wall fan 16'' Sweep (400mm) oscillating type light duty complete with built-in regulator , blade, jali complete. ( Make Havells / Crompton make or equivalent approved) Havell make Platina oe C.G high 610L.G white
6each- 12480
... more
S/E of LED Flood light 50/60 watt suitable for operation on 230 Volts A.C. Supply C.G model LFLE 50 CDL or equilent
18each- 82350
... more
S/E of 70/80 W Flood light mountmed unmder canopy luminiare with IP66 Protection suitable for 220 V, 50 Hz supplu . Make Crompton or as per brand list approved complete in all respect
6each- 45240
... more
S/E of 40 W decorative post top for 360 indirect light with IP 65 Protection, resistant to impact & corrison suitable For 220 C 50 Hz supply compelte in all respect. Make as per brand list
6each- 18972
... more
S/E of PVC hard drain pipe of 25mm dia including PVC Tee, Elbow, Complete in all respect.
120mtr- 13800
... more
S/E of Sheet steel enclosure suitable for 3/4 pole MCCB on wall / pedestal with nuts/bolts complete in all respect. for 100A to 315 A MCCB
3each- 3828
... more
NS Total
-- -

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.