SV National Institute Of Technology Tender

Applying zink primer of approved make to any dia. of steel after cleanning steel with rust remover and washing with water including labour and all complete as per direction of Engineer-In-Charge. (As per M.R. +1% L.C.= 18.00+0.18=18.18)

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 25 mm average thickness in 2 layers. DSR cn: 26.32.2 P/430-431

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)(DSR cn:-6.34.2, P/111)

CEMENT PLASTER (IN FINE SAND) : (B) 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) (DSR cn:-13.3.1, P/228)

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. (DSR cn:-1322, P/229)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)(DSR cn:-14.1.1, P/245)

Water proofing treatment of RCC sunshade with Zycosil/ equivalent water proofing Solution (1 litre of ycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent added and stirred (total 23 litres)) till it meets the saturation level and testing as per RILEM or by water drops test in which water drops do not absorb but drops remain or rolls.(DSR cn:-26.60, P/439)

In-filling / sealing of joint between RCC lintel cum sunshade and wall (on external side) in all floors by pushing in Grout RW/equivalent in paste form and coving 20 mm x 20 mm after applying a coat of Zycosil/equivalent & zycoprime/equivalent solution before cement plastering of top, bottom and sides of RCC sunshade.(DSR cn:-26.61, P/439)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm (N.B.: item also used to remove chine mosaic manually)(DSR cn:15.23.1 P/260)

Providing and filling cracks on terrace/external walls with crack filling with grout + S.B.R. chemical of standard company i.e. ROFF, Dr. Fixit, Sunanda or Fosrock after cutting v-groove for cracks filling it properly and applying chemical coating on cleanned base surface with first coat of Brush coat of Kem Bond or Sunanda Polyalk W.P. liquid chemical + second coat Sunext-8 with white cement after filling of cracks properly to prevent seepage of rain water from it for terrace as well as all external walls with all lead and lift and cleanning of debris material including 5-years of written guarantee, as per instruction of engineer in charge etc. complete. {As per M.R.+ 1% L.C.(525.00+5.25=530.25)}

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed. {SOR It :-14035, p/149 + 1 % L.C. (479.00 + 4.79 = 483.79)}

Finishing walls with Acrylic Smooth exterior paint of required shade. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (DSR cn:-13.46.1, P/232)

Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight. Note - Only plan area of chajjas shall be measured for making payment](DSR cn:-9.128, P/165-166)