Oil And Natural Gas Corporation Limited Tender

Supply, Installation, Testing and commissioning of Inverter based approved make Cassette type split air-conditioning unit of 1.0 TR Capacity consisting of evaporating unit and blower motor with its accessories & Remote control (5 star and above of current year) with necessary core cutting.

Supply, Installation, Testing and commissioning of Inverter based approved make Cassette type split air-conditioning unit of 1.6 TR Capacity consisting of evaporating unit and blower motor with its accessories & Remote control (5 star and above of current year) with necessary core cutting.

Supply, Installation, Testing and commissioning of Inverter based approved make Cassette type split air-conditioning unit of 2.0 TR Capacity consisting of evaporating unit and blower motor with its accessories & Remote control (5 star and above of current year) with necessary core cutting.

Supply, Installation, Testing and commissioning of Inverter based approved make Cassette type split air-conditioning unit of 4.0 TR Capacity consisting of evaporating unit and blower motor with its accessories & Remote control (5 star and above of current year) with necessary core cutting.

Supply and Installation of copper refrigerant distribution joints (Y-Joints)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceilings using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by EIC .12.55 mm thick square edge PVC laminated gypsum tile of size 595x595 mm made of gypsum plasterboard manufactured from natural gypsum as per IS 2095 part 1 and laminated with white 0.16 mm thick fire retardant PVC film on the face sie and 12 micron metalised polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Supply, Installation, Testing and commissioning of weatherproof, dust & vermin proof, floor mounted front operated indoor type cubical Electrical Panel board necessary IP-42 and above protection as per approval from engineer in charge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S. sheet for internal partitions with necessary accessories, supporting angles / flats channel including cutting, bending, drilling,welding, riveting with internal partitions & cable alley as per requirements &instruction of EIC supplied switchgears, BUSBARS, suitable size of interconnecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses / MCB for measuring instruments, earth bus & earthbolts, foundation flange- bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket, heavy duty end terminal connection, danger notice board, necessary ventilation, earthing strip complete. The Panel shall be painted with epoxy powder coating. Consisting of 200 A 4P MCCB as Incomer, 63A 4P 03nos. MCB + 10A 2P 10nos. MCB as Outgoing of 1300mm X 750mm X 400mm size

Supply, Installation, Testing and commissioning of 18G hard drawn copper piping for suction and liquid line with necessary supports and 19mm thick Nitrile Rubber insulation suitable upto 24 H.P. VRV / VRF system

Supply, Installation, Testing and commissioning of control and communication cabling between indoor and outdoor units in rigid PVC conduit suitable upto 24 H.P. VRV / VRF system.

Supply & Installation of drain pipe for VRF & Split System, grey PVC, 32mm dia. with 6mm insulation

Supply & Installation of outdoor MS stand powder coated, for VRF System

Extra Gas Charging for all above units as per there Cu Piping length & Indoor unit Capacity (R-410A Gas) for VRF System

Supplying and erecting LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete, IP20, 36 watts, 24" x 24", Surge- 2KV indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD 15 %, CCT 3000 K to 6500K, Luminaire efficacy 85 lumens/watt , LED driver efficiency 85 % ( fitting required LM-79 & LM-80 Certificates) [CAT-III]

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed, with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete (CAT-III)

Supplying & erecting XLPE (IS:7098) (I) -88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of 4 core 2.5 sq. mm. size

Providing and erecting XLPE (IS:7098) (I) - 88 ISI armoured cable multistrand Copper conductor for 1.1KV. To be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of 4 core 16 sq. mm. size

Supplying & erecting earth pit of minimum bore dia. 150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS3043-1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (A) (approved make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistance mentioned in test Certificate) & having back filling compound of (B) Innerchemical (CCMCompound)-Resistivity:-0.2ohm/meter testing as per IEC62561-2017, Voltagedrop:-1volt at no load & dry form, Sulpharcontent:-2%(C)BackfillCompound:-Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency. (a) For Electrical Installation upto 11 kV in normal soil Length of pipe - 2 Mtr Back filling compound - 1 Nos Bag of 25 Kg.

Disposal of Scrap and dismantled facilities ( Details in part D) of SOW