Military Engineer Services Tender

M&L for preparing of old black top surfaces wth brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc filled of voids with specially designed paste and applying Polymer Modified Emulsion (PME)- Rejuvenator mopping of total cold liquid PME 1 litre per sqm (Undulited) in two coats with mineral filler(1/8 part of PME by wight) as recommended by manufacturer of PME (after diluting with water), each coat diluted in the ratio 1:1 (PME : Water) and ensure uniform finish of runway complete all as per manufacture's instructions and all as specified and as directed by Engineer-in-charge. Note: The tenderer shall take into consideration for the follwing points while quoting his rate for this item :-

(a) Applicator: the work shall be carried out through authorized and qualified applicators of the manufacturer only. In case of non-availability of applicators, the approval will be obtained from E-in-C;s Branch. (b) Mechanical spraying. Application of PME - Rajuvenator should be carried out mechanically to ensure homogeneous mixture of PME - Rejuvenator and mineral filler for uniform application. (c) Warranty : two years warranty of material performance and application performance to be obtained from the authorized manufacturre of PME- Rejuvenator. (d) Time Schedule : Understanding the urgency of rehabilation of runway and its deterioration, the work must be completed wihtin 60 days from the date of commencement of awarded work. (e) Approved Applicaators. ASR PME shall be manufacturesd by M/s LN Petro Chem Privite limited and M/s Hindustan Coals Pvt Ltd or any other make approved by E-in-C's Branch. Make: Hincol CQS1h of equivalent product of shell India Markets Pvt Ltd as spcified and approved by GE). Note :- The tenderer shall consider the following point/details while quoating the rate for Item (i) No extra amount will be paid to the contractor if excess qty of PME using by the contractor than specified qty in the item.

M & L for removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any numbers of coats, any width or girth and prepration of old surface and applying two coat of painting lines, dashes,arrow, ltters, etc on roads, pavement and like exc 10 cm wide with road marking paint, white/black, golden, yellow, grey complete all as specified and directed. (Make: Shalimar, asian, Johnson & Nicolsan, Berger, Indigo, Dulex, Nerolac Paints (all first Grade Only)