Military Engineer Services Tender
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_683883_1Tender No
8322/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S & F of 6 mm thick Wood Plastic Composite sheet of Plain colour of Density 650 kg/cum fixed with screws, solvent cement/ adhesive to make kichen cabinate back covering and pull out drawer base complete as directed by the Engr-in- Charge. Make - Rajshri or equivalent as approved by the GE.
0.3
-
-
S & F 20mm wide and 1 mm thick PVC Edge beading pasted with sutable adhesive, complete all as specified and directed.
20
-
-
S & F of auto closing hinge, openable at 0 degree for kitchen cabnet shutter complete all as directed.
8
-
-
S & F stainless 5 Ball bearing runners 45 mm Telescopic Channel (20 Inch) full extension load capacity 50 kgs, complete all as specified and directed.
6
-
-
S & F of stainless steel handles, 200 mm size, for kitchen cabinet shutter, complete all as directed.
20
-
-
S & F for chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 486x500 mm with necessary fixing clip etc complete in all respect as specified and directed by Engr-in Charge. Make : Godrej or Equivalent as approved by the GE.
1
-
-
S & F for chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530x500mm with necessary fixing clip etc complete in all respect directed by Engr-in Charge. Make :- (Hettich, Ebco, Prime or equivalen as approved by the GE)
2
-
-
S & F for chrome plated stainless steel wire basket (Jar basket) pull out type, size 536x500mm with necessary fixing clip etc complete in all respect as directed by Engr-in Charge. Make :- (Hettich, Ebco, Prime or equivalen as approved by the GE)
1
-
-
S & F for chrome plated stainless steel wire basket (Thali basket) pull out type, size 380x500mm with necessary fixing clip etc complete in all respect as directed by Engr-in Charge. Make :- (Hettich, Ebco, Prime or equivalen as approved by the GE)
1
-
-
S & F for chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380x500mm, with necessary fixing clip etc complete in all respect as directed by Engr-in Charge. Make :- (Hettich, Ebco, Prime or equivalen as approved by the GE)
1
-
-
S & F 4 mm thick sheet glass ordinary quality, fixed with nail and PVC beading, in square n exc 0.50 sqm each pane.
1
-
-
M&L 18-20mm thick Granite(of any type) work(table rubbled and polished) in steps, jambs, pillar, window cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed
3
-
-
S & F sinks with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm
1
-
-
S & F in repairs 40mm bore Waste fittings, brass chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
1
-
-
S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed
57
-
-
S & F for waste pipe of 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 all as specified and directed
1
-
-
S & F 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
10
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
5
-
-
Taking down cement plaster on brick or stone walls / ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc. complete including removing rubbish off the MD land.
395
-
-
M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:4 finished surface even and smooth without using extra cement.
567
-
-
M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement.
180
-
-
M&L 15mm thick Screed bed or bedding layer of mortar for laying floor finished in Cement Mortar 1:4 complete all as specified and directed by Engr-in -Charge.
10
-
-
M&L for 10mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and fair without using extra cement.
160
-
-
M&L, Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement complete all as specified and directed.
25
-
-
M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match.
60
-
-
Material & Labour for prepration of new plastered surface of wall incl pilasters/ cornices etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
485
-
-
Material & Labour for prepration of old plasterd surface of wall incl pilasters/ cornices etc and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. (Note - Work to be carried out in camouflage pattern)
780
-
-
M & L 75mm outlet dia Cast Iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 ( 1:2:4)
1
-
-
S & F 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floors or laid in trenches including clamp complete all as specified and directed by Engr-in- Charge.
34
-
-
S & F PVC (SWR) junction single (Single T) equal or unequal of 75mm bore all as specified and directed.
1
-
-
S & F 75mm bore PVC (SWR) bends any readius all as specified and directed.
7
-
-
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
360
-
-
S&F for pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour profile AZ-150 with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws all as specified and directed.
412
-
-
S & F steel work, in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to IS - 1161- 1979 grade St-240 complete all as specified and directed.
1575
-
-
Supply and fixing pre- painted Galvalume aluminum zinc coating GI based plain sheet 0,50mm thick of any colour having tensile strength of 550 mpa as in roof covring , chajjas/walls/, fitting & fixing ,zinc coatting including J and L hook tap screw complete all as specified and directed.
135
-
-
M&L for precast cement concrete solid block masonry 1:5:8 (20mm graded stone aggregates) straight or curved on plan exc 6 m mean radius, exc 10 cm width and set in cement sand mortar (1:6) all as specified and directed.
73.5
-
-
All as per above item No here in before but except concreate blocks.
1.82
-
-
M&L for two coat of oil bound distemper by spray machine over one coat of primer on new plasterd surfaces of walls, pillars cornces etc incl prepartion of new plastered surfaces through electrical operated grinder complete all as specified and directed
455
-
-
M&L for applying two coats of oil bound distemper by spray machine incl preparation of old surface by complete removal of existing treatement on walls through electrical operated grinder etc, incl necessary minor repair of wall by putty complete all as specified and directed.
535
-
-
M & L for three coat of white wash incl preparation of new plastered surface of ceiling complete all as specified and directed.
375
-
-
M&L for anodised aluminium powder coated door, window and ventilator shutters, aluminium section weighting 0.55kg/RM fixed type without sash bar, incl necessary 4.8mm th sheet glass ordinary quality & glazing / black or PVC sheet joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 Nos aluminium handles 150mm, 2 x Aluminium tower bolts 150mm with each shutter any type complete all as specified.
23.5
-
-
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete confrming to Fe-290 (Gde-E-165).
762
-
-
M&L for preparation of new steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed.
65
-
-
Demolition of precast block masonery/stone boulder masonry built in cement mortar or cement lime including all quoins,arches,pillers etc but excluding ashlar facings and dressed stone work complete all as specified and directed.
32
-
-
M & L for PCC 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , including demolition of existing floor and removing rubbish off the primises complete all as Specified & directed .
2
-
-
M&L for green marble, 18mm thick, jointed with grey cement slurry mixed with pigment to match the shade of the slab / stair case / steps / riser including rubbing and polishing & moulding, rounding to edge of marble over and including cement sand screed bed 15 mm thick in CM 1:6 complete all as specified and directed.
14
-
-
Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams and similar works for rough finished surface complete all as directed.
62
-
-
M&L for RCC nominal mix type B-1, 1:2:4 , using 20 mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors,
roofs, landings, balconies,canopies, deck slabs and in shelves and the like all as specified and directed.
0.4
-
-
M&L mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required including cranking bending hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips complete.
1385
-
-
S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
22
-
-
S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm "medium grade " with rubber ring joint, laid in trnches or in floors, complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
30
-
-
S&F for 110mm dia PVC bends/junction any radius complete all as specified and directed. .
12
-
-
Surface excavation not exceeding 30 cm deep and averaging 15cm
deep and getting out soft/loose soil complete.
320
-
-
Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point as directed by Engr-in-Charge.
105.5
-
-
M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete.
81.3
-
-
M & L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base, sub floor and paving etc. complete.
375
-
-
M & F for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade complete.
540
-
-
All as per srl item above but except paver block to be reused after necessary cleaning and making good all as specified.
30
-
-
M&L for sand cushioning 25mm thick over hardcore/Concrete surfaces, spread all as specified.
13.88
-
-
Surface dressing n exc 15 cm deep in soft / loose soil.
18
-
-
Excavating in trenches, n exc
1.5 m wide and n exc 1.5 m in
depth; for foundation, etc. or
for shafts, wells, cesspits,
manholes, pier holes, etc. n
exc 10 sq m on plan and n exc
1.5 m in depth and getting out in soft / loose soil.
100.7
-
-
M&L Cement concrete 1:4:8Type D2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.
5.85
-
-
M&L 40mm thick Damp proof course in cement concrete 1:2:4 to horizontal or vertical surfaces including necessary formwork
2.8
-
-
M&L mild steel CRS TMT bars 6 to 8mm dia , cut to length, bent to shape required, includiing cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
67
-
-
M&L mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, includiing cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
3238
-
-
Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc, rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
101
-
-
M&L for Reinforced cement concrete 1:2:4 Type B1(Nominal mix, using 20mm graded aggregate) as in Beams, cantilevers, bressummers,
lintels over 1.5m span and the like, complete all as specified and as directed by Engineer-in-Charge.
1.35
-
-
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to
common rafters and running rails
and guides for sliding doors;
fixed with angle cleats or other
connecting plates, Fe 410-W (Gde-E-250), quality A.
65
-
-
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm.
52.5
-
-
S&F 600x600mmx4mm thick false ceiling of Non esbestos fibre cement building boards (E Board) and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm . The aluminium frame work will be supported on side wall with the use of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge.
185
-
-
M & L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base, sub floor and paving etc. complete.
5
-
-
M&L 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub floors, sub bases, floors and pavings, etc.
60
-
-
M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match.
145
-
-
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spd and directed
105
-
-
S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.
15.5
-
-
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter complete all as specified and directed complete all as specified and directed.
7
-
-
S&F Steel ventilator with top hung
shutter including hinges, steel peg
stay, complete
0.41
-
-
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in
square n exc 0.5 sq. m in each pane
0.41
-
-
S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed.
6
-
-
S&F for 125mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
4
-
-
S&F for aluminum handles cast type anodized 150 mm long (ISI Marked) complete all as specified and directed.
4
-
-
Supply only liquid water proofing compound.
9.13
-
-
M&L for applying two coats of cement base paints on walls etc,incl preparation of new plastered surface complete all as specified and directed.
47
-
-
S&F 20mm bore steel water Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors
35
-
-
S & F Angle cock cast copper alloy, CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.
29
-
-
S&F for PVC connections 45cm long superior quality with PTMT nut on both sidecomplete all as specified and directed.
10
-
-
S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)
2
-
-
S & F 32/40mm dia waste pipe of polyethylene flexible pipe for wash hand basin or kitchen sink.
2
-
-
S & F Vitreous Cliina wash basin, wliile, flat back, size 580x450irun (for Hospilal use) with pedestal including pillar taps, waste coupling, waste pipe and brackets complete.
2
-
-
S& F for Looking mirror of best size (600 x 450) mm bevelled edged mirror of selected quality glass mounted on 6mm th AC building board, aluminium channel around fixed with provision of hanging hooks complete all as specified and directed.
4
-
-
S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.
3
-
-
S&F in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directed.
4
-
-
S & F Soap dish, vitreous China white, approximate size 160x 160x90mm
2
-
-
S & F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement
2
-
-
S & F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed by Engr-in- Charge.
45
-
-
S & F PVC (SWR) junction single (Single T) equal or unequal of 110mm bore, with oval access door, all as specified and directed.
3
-
-
S & F 110mm bore PVC (SWR) bends any readius all as specified and directed.
5
-
-
S & F 110mm PVC (SWR) vent cowl
5
-
-
M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 110mm bore pipe.
2
-
-
M & L for 100 mm thick cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base, sub floor and paving etc. complete.
15
-
-
M & L for Machine pressed precast
concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, wih grey cement and pigmen.
15
-
-
M & L for filleting in any position and to any shape in cement sand mortar 1:4 including mitres, stops, etc., exc 25 but nexc. 50 sqcm
21
-
-
S&F in repairs 15 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors, concealed type, including cutting chases and filling chases with cement sand mortar 1:3, complete all as specified and directed
30
-
-
S&F in repairs 20mm bore steel water Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors
20
-
-
Fixing only in repairs 20mm bore steel water Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors
10
-
-
S&F for rotational moulded polythene 500 litres water storage tanks, triple layer, cylindrical vertical with closed top hoisted and fixed in position incl 20 mm dia float valve with aluminium fitting incl disconnecting and taking down old tank, complete all as specified and directed.
1
-
-
M&L for applying two coats of cement base paints on walls etc,incl preparation of old surface and complete removal existing treatement on wall complete all as specified and directed.
1050
-
-
S&F for 110mm bore PVC Gully Trap set / jointed with solvent cement complete all as specified and directed. .
4
-
-
S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down shutter & two coat of synthetic enamel paint over a coat of red oxide on wooden surface and cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface and the following builders hardware contain each shutter :- (i) Three x MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or screwed as required. (ii) Two x aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked). (iii) Two x aluminum handles cast type anodized 150mm long (ISI Marked). (iv) Two x aluminium alloy, anodised, sliding door bolt of 250mm long & 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed.
2
-
-
S&F for 2nd class hard wood glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts fixed with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with wire staples or wooden beads incl taking down shutter and two coat of synthetic enamel paint over a coat of red oxide on wooden surface & cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B1 /cement plaster 1:4 as require and make finish good to the existing surface & incl the following builders hardware contain each shutter :- (i) Three x MS butt hinges, cold rolled mild steel 100mm long (ISI Marked) with welded or screwed as required. (ii) Two x aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked). (iii) Two x aluminum handles cast type anodized 150mm long (ISI Marked). complete all as specified and directed.
2.5
-
-
M&L for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and directed.
8
-
-
S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
4
-
-
S & F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 100mm, type C-21 complete all as specified and directed.
10
-
-
S&F for aluminum handles cast type anodized 100 mm long (ISI Marked) complete all as specified and directed.
6
-
-
S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
4
-
-
M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc complete all as specied and directed
62.88
-
-
S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and directed
12
-
-
M & L for PCC 1:4:8 type D-2 (using 20 mm agg. ) in sub base of flooring incl demolition complete all as specified and directed.
37.5
-
-
M & L for 100 mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub base, sub floor and paving etc. complete.
60
-
-
S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.
1
-
-
S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm with leg incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.
2
-
-
S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.
1
-
-
S& F for in repair 15mm swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed
1
-
-
S&F in repair hole wash basin mixer wround spout with 375 mm long braided hoses complete all as spd and directed.
1
-
-
S&F in repair for door closer hydrulicacally,alluminium regulated designation No 1 universal type suitable for door shutter complete all as specified and directed.
4
-
-
S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)
2
-
-
S&F for Steel rolling shutters,1.25mm thick with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including taking doown old rolling shutter complete all as specified and directed.
15
-
-
M&L for Reinforced cement concrete (DESIGN MIX M-30, using 20mm graded aggregate) as foundations, including rafts, footings foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete
15.5
-
-
M&L for Reinforced cement concrete (DESIGN MIX M30, using 20mm graded aggregate) as Beams, cantilivers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer-in-Charge.
1.8
-
-
M&L for Reinforced cement concrete (DESIGN MIX M-30, using 20mm graded aggregate) as Columns, pillars,piers, posts and struts complete all as specified and as directed by Engineer-in-Charge.
5.5
-
-
Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surfaces of concrete, square, rectangular or polygonal complete all as specified and as directed by Engineer-in-Charge.
54
-
-
M&L for Reinforced cement concrete (DESIGN MIX M-30, using 20mm graded aggregate) as Chajjas complete all as specified and as directed by Engineer-in-Charge.
0.4
-
-
Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
3.2
-
-
M&L for Reinforced cement concrete (DESIGN MIX M-30, using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
16.5
-
-
Use and waste formwork to soffits of suspended slabs, such as roof slabs, floor slabs, landing and similar work not exc exceeding 200mm thick(Horizontal or sloping), rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge complete all as specified and as directed by Engineer-in-Charge.
74
-
-
Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm widefair finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
36
-
-
M&L for Reinforced cement concrete 1:2:4 Type B1(Nominal mix, using 20mm graded aggregate) as walls, retaining walls, basement walls, ballast walls and the like, any thickness above top of footings, including attached pilasters and buttresses complete all as specified and as directed by Engineer-in-Charge.
2.2
-
-
Use and waste form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc, vertical or to better, rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
27
-
-
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including wataring complete all as specified and as directed by Engineer-in-Charge.
10
-
-
M&L 75mm thick Cement concrete type C-2 , 1:3:6 (using 20mm graded aggregate) as in plinth protection /flooring finished surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
30
-
-
S&F Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railing, framework of water tanks and similar work conforming to Fe410-O or Fe 310-O complete all as specified and as directed by Engineer-in-Charge.
175
-
-
M & L for screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 including mixing only liquid water proofing compound as per manufactures instruction and finishing the surface fair and even complete all as specified and as directed by Engineer-in-Charge.
75
-
-
M & L for APP based polymer membrane minim weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non fabric ( wt not lass than 150 grm/sqm) land complete and including a caot of approved cold applied bitumenous oil based primer at the rate of 250 grm per sqm sshell be laid by torch application mathod all as specified and as directed by Engineer-in-Charge.
75
-
-
S&F 0.80mm Mild Steel, plain, black sheet in hearths, covering to door shutters, covering to door chowkats(frames) chullah hoods, water tanks, water troughs, ducts, urinal troughs and funnels, etc cut to size edges beaded if directed, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members etc, with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlet etc as required complete all as specified and as directed by Engineer-in-Charge.
16
-
-
S & F in position anodised aluminium power coated (minimum thickness of power coating 50 mircon) door shutter with frame, partly glazed wirh 5 mm tick tinted glass and partly panelled with 9mm thick perlaminated partical board with both side decorative laminnated including rubber bead, jointing cleat for fixing in position, aluminim door handle 150 mm size, aluminium barrel bolt 200mm size etc including taking down of old frame with shutter of any size all as specified and directed (a) Frame (top & side) section shell of size 101.60x44.75x2.4mm (section No 14021) (b) Vertical members of shutter secction shell be of size 85.00x44.45x2.00mm (section No 19560)
(c) Topmember of shutter section shell be of size 83.50x44.45x2.00mm ( Section No 19596)
(d) Lock rail (middle member) of shutter section shell be of size 150.00x44.45x3.00mm (Section No 19596
9e) Bottom member of shutter section shell be of size 150.00x44.45x3.10mm (section No 19584)
(f) Glazing clip for securing glass of shutter shell be of 0.80mm thick (Section No 19370) Note :- Section nos given above are of make jindel, contactor may be ude similat sectio of other make mention in Appx 'B'.
5.5
-
-
S & F for position anodised aluminium power coated (minimium thickness of power coating 50 mircon) three track window (two shutter glazed and one shutter gauge) with frame, glazed with 4 mm thick tinted glass, and wirre gauge with stainless wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position concealed type lock for all two shutter PVC roller etc all as specified below, complete all as specified including taking dwon old window. (a) Frame (top & side section shell of size 92.00x31.75x1.50mm (section No 20831) (b) Frame (bottom) section shell of size 92.00x31.75x1.50mm (section No 20832)
(c) Top & side member of shutter section shell be of size 18.00x40.00x1.55mm (section No 20738) (d) Shutter intercock section shell be size 18.00x40.00x1.45 mm (section No 20737)
(e) Bottom member of shutter section shell be sixe 18x40x1.55mm (Section No 20736) Note :- Section nos given above are of make jindel, contactor may be ude similat sectio of other make mention in Appx 'B'.
7.5
-
-
M&L for 5mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement as in ceiling complete all as specified and as directed by Engineer-in-Charge.
55
-
-
Excavating in trenches, n exc
1.5 m wide and n exc 1.5 m in
depth; for foundation, etc. or
for shafts, wells, cesspits,
manholes, pier holes, etc. n
exc 10 sq m on plan and n exc
1.5 m in depth and getting out in hard / dense soil.
6
-
-
Material & Labour for point wiring with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including heavy duty PVC conduit, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including sheet metal flush box suitable complete for following:
-
-
-
One Light / Fan / Exhaust fan point controlled by one switch
4
-
-
One 3 Pin socket outlet 5 Amp point controlled by one switch on same board.
2
-
-
One 3 Pin socket outlet 5 Amp point controlled by one switch on independent board.
16
-
-
Material & Labour for point wiring with 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including heavy duty PVC conduit, including all accessories like bend, tees, junction boxes etc. including 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc for 15 Amp multi purpose socket outlet on independent board, including sheet metal flush box complete.
8
-
-
Supply and fixing Modular switch 1 way 6A, 1 module all as specified & directed.
49
-
-
Supply and fixing Modular switch 1 way 16A, 1 module all as specified & directed.
8
-
-
Supply and fixing modular Socket, 6A - 2/3 pin combined 2 module, all as specified & directed.
29
-
-
Supply and fixing modular Socket, 6/16A - 2/3 pin combined 2 module, all as specified & directed.
12
-
-
M&L Modular Fan step regulator, 120W - 2 module
7
-
-
Supply & Fixing in Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body.
30
-
-
Supply & Fixing M.C.B. SPN, 240 Volts, 63 Amps breaking capacity 10 KA (type B curve).
1
-
-
Material & Labour for concealed point wiring with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including heavy duty PVC conduit, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including sheet metal flush box suitable including cutting chases and repairing the surfaces in cement sand mortar 1:3, complete for following:
-
-
-
One Light / Fan / Exhaust fan point controlled by one switch
43
-
-
One 3 Pin socket outlet 5 Amp point controlled by one switch on same board.
12
-
-
One 3 Pin socket outlet 5 Amp point controlled by one switch on independent board.
20
-
-
S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 6 To 32 AMP in the MCB DB complete with connection testing and commissioning.
20
-
-
S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 40 AMP in the MCB DB complete with connection testing and commissioning.
2
-
-
S & F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
2
-
-
M&L for sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 6sq mm copper cable multi stranded conductor drawn through and including ISI marked PVC conduit 25 mm dia complete, fixed on walls/ceilings with PVC saddles as per IS including 6 sqmm dia FRLS PVC Copper cable green colour as earth wire connected to earth all as specified and directed by Engineer-in-Charge.
15
-
-
Supply and fixing LED light fitting 1x 22W, 220V, AC decorative box type with driver, holder including
LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
14
-
-
Supply & fix exhaust fans plastic body AC single phase 230/ 240 V of size 300 mm sweep with louver all as specified and directed by Engineer in charge
1
-
-
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 02 core 10 sq mm (from exisiting LT Panel to SPN DB)
70
-
-
Taking down copper / aluminium point wiring (light, fan, socket or power socket ) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
34
-
-
Material & Labour for concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including heavy duty PVC conduit, including all accessories like bend, tees, junction boxes etc. including 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc for 16 Amp multi purpose socket outlet on independent board, including sheet metal flush box including cutting chases and repairing the surfaces in cement sand mortar 1:3, complete
6
-
-
S&F Switch piano, flush type single pole, one way 5 Amp including connection complete.
34
-
-
Supply & Fixing Socket outlet 3 pin, 6A, flush type.
4
-
-
S&F in repair switch socket combination flush type 6/16 Amps, 5 in 1 multipurpose including connection complete.
4
-
-
Supply & fixing of sheet metal enclosures for fixing MCBs Single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar withe double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as directed.
1
-
-
Material and labour for earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to GI wire 4mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore galvanised iron medium grade and 40 mm bore galvanised iron light grade for earth strip protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion.
Note:-Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length
3
-
-
Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
2
-
-
S&F in repairs energy efficient decorative ultra slim LED tube light fitting with built in LED & integral LED driver 22 watt, aluminium extruded channel (approximate length 1200 mm) housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.
10
-
-
Supply and fixing LED Building security light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal
management in multiple optics complete with IP 65/66 protection complete.
4
-
-
Supply and fix in repair Energy efficient recessed mounted 36 watt LED luminaries (lumen efficiency not less than 120 Lumen / watt) suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver all as specified and directed by Engg-in-charge
8
-
-
Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor.
1
-
-
M&L for providing dry river sand as in sand cushioning to under ground PVC cable including punning down of sand in layer all as specified and directed.
(Note: Work shall be executed as per clause 19.75 of standard schedule of rates part-1 (2009) for measurement purpose thickness of sand after punning down will be considered.)
14
-
-
M&L for brick, subclass 'B' well burnt, laid dry flat in trenches for protection of cable over LT cable, complete all as specified and as directed by the Engineer-In-Charge
480
-
-
S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 AMP in the MCB DB complete with connection testing and commissioning.
1
-
-
Supply & fixing of sheet metal enclosures for fixing MCBs TPN 4way, 415 volts with 200 Amps rated neutral bus bar with double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as directed.
1
-
-
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
7
-
-
S&F of LED Street Light fitting 30 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. make wipro cat part no LR02-331-XXX57-XX equivalent of crompton/philips/havells/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.
2
-
-
Supply & laying ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV , Type I , flat size 250 mm X 150 mm X 40 mm in trenches as protection to LT UG cable all as specified and directed.
930
-
-
Supply and laying GI tubing 50 mm dia bore light grade laid in trenches / floor / fixing on pole / wall for cable protection with necessary fittings etc. complete all as specified and directed.
10
-
-
Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed
180
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%