Waterproofing Tenders

Details: Description Item No. Specifications Qty Unit Statement Of Compliance Supply And Delivery Agricultural Supplies For The Implementation Of Fisheries Biotechnology Center (fbc) Projects Under Maridep 1 Agricultural Supplies For Rearing Of Climbing Perch 1 Lot Seine Net 1 Piece Specification: Size: 2m Depth X 2.5m Long Mesh Size: 6mm Packaging: With Floaters Inclusion Hand Towel 30 Pieces Specification: Cotton Color: White Size:25cm X 40cm Air Stones 50 Pieces Specification: Cylindrical Air Stone Size: 2 Inches Color: White T- Connector 50 Pieces Specifications: Material: Pvc Color: White Size: Approx. Length 3.8cm/1.50 Inches, Suitable For 4mm/0.16 Inches Tube Weight: Approx. 2g Air Regulator 50 Pieces Specifications: Plastic Color: White Connector Diameter: Approx. 4mm Suitable For 4mm Inside Diameter Air Connector Specification: X-shape Material: Plastic Color: White 50 Pieces Portable Air Pump Specification: Double Output Watts: 5 Input Power: Ac 220v-240v/50hz 20 Pieces Fine Mesh Net (roll) 2 Rolls Specification: 50 Yards/roll Color: White Scoop Net 10 Pieces Specification: Mesh Type (cloth) Mesh Size: (150 Um) Size: 12 Inches Shape: Round Scoop Net (small) 5 Pieces Specification: Mesh Type (cloth) Mesh Size: (150 Um) Size: 3 Inches Shape: Square Scoop Net (medium) 5 Pieces Specification: Mesh Type (cloth) Mesh Size: (150 Um) Size: 4 Inches Shape: Square Scoop Net ( Big) 10 Pieces Specifications: Mesh Type Mesh Size: (150 Um) Size: 3 Inches Shape: Square B- Net, Double Width (roll) 3 Rolls Specification: 50 Yards/roll Color: Black Organza Cloth (roll) 3 Rolls Specification: Frosted Organza Fabric Color: White Packaging: 50yards/roll B/r Nylon Twine (roll) 10 Rolls Specification: Cotton Sizes: Large Color: Black Packaging: 50meters/roll Plankton Net/ Silk Screen 5 Pieces Mesh Size:(400um) Packaging: 1.65m X 1m Plankton Net/ Silk Screen 5 Pieces Mesh Size: (250um) Packaging: 1.65m X1m Plankton Net/ Silk Screen 4 Pieces Specification: Mesh Size: (0.5um) Packaging: 1.65m X1m Strainer (big) 8 Pieces Specification: Plastic Fine Mesh With Strainer Size: Large Nylon Thread 5 Rolls Specification: White Packaging: 300m/roll Rope (#10) 2 Rolls Specification: High Quality Thickness: 10mm Color: Orange Packaging: 200m/ Roll Rope (#8) 3 Rolls Specification: High Quality Thickness: 8mm Color: Orange Packaging: 200m/ Roll Rope (#6) 3 Rolls Specification: High Quality Thickness: 6mm Color: Orange Packaging: 200m/ Roll Plastic Tub 5 Tubs Specification: Capacity: At Least 50l/tub Diameter: At Least 47cm Height: At Least 60cm Digital Weighing Scale 5 Pieces Specification: Capacity: 3g Display: Led Readability: 0.0001g Stainless Casserole With Cover 2 Pieces Specification: Material: 201 Stainless Steel Style：american-style Application Scenarios：commercial Applicable Object：gas Stove Universal Pot Type：single Bottom Size: At Least 35cm Weighing Scale 5 Pieces Specification: High Quality Stainless Steel Spring Weighing Platform Scale Capacity: 10kg Size Of Scale: 14cm X 20cm X 20cm Size Of Bowl: 21cm X 4.5cm Material: Stainless Steel Color: Gray And Blue Knife Specification: Material: Stainless Steel Size: 8 Inches 10 Pieces Chopping Board 5 Pieces Specification: Size: 60×40 Cm Thickness: 1.8 Cm Color: White Material: Plastic (food Grade) Hand Gloves 5 Pairs Specification: Rubber, Oil-resistant, Abrasion-resistant, Non-slip Size: Free-size Faucet 10 Pieces Specification: Steel, 2 Way Function, Heavy Duty, Long Lasting Material: Zinc Aloy, Chrome Plated Color: Silver Size: 97mm X 20mm X 57mm Galvanized Iron Pipe 30 Pieces Diameter: 15mm (1/2 Inch) Length: 200mm (8 Inches) Thickness: 1.80mm Extension Cord 10 Pieces Specification: Heavy Duty Maximum Currency: 6a 1500w; Four (4) Gang With 2 Usb Port And With Master Switch Rated Voltage 127v/220v~250v Frequency: 50/60hz Length: At Least 5 Meters Plastic Laundry Brush 5 Pieces Specification: High-quality Push Brush With Handle (plastic) Handle Height: 96cm; Width: 25cm Paint Thinner 3 Bottles Specification: Color Less Packaging: 350ml/bottle Pail W/ Cover 10 Pieces Specification: Premium Design Plastic Handle Volume Capacity: 12 Liter Size: 26.5 X 31 Cm Flat Bar 3 Pieces Specification: Width: 1 ½ Inches Thickness: 3/16 Inches Length: 6.0 Meter Angle Bar 3 Pieces Specification: Width: 1 ½ Inches Thickness: 3/16 Inches Length: 6.0 Meter Iron Bar 3 Pieces Specification: Thickness: 16 Mm Length: 48 Inches Fluorescent Lights 4 Pieces Specifications: 18 Watts Color Temperature: Daylight Light Bulb 9 Pieces Specification: Led Bulb; Lasts Up To 10 Years; 85% Energy Saving; Beam Angle: 290° Ac Input: 220 - 240v Average Lifetime: 20,000 Hours Watts: 18 Air Hose 5 Rolls Specification: High Quality Inner Diameter: 4mm Outer Diameter: 6mm Packaging: 200 Meters/roll Carbouy Container (food Grade) 60 Piece Specification: Heavy Duty Color: Transparent Capacity: 20l Vernier Caliper 5 Pieces Specification: Heavy Duty And High Quality Size: 6 Inches (150mm) Material: Plastic Disposable Pasteur Pipette 5 Packs Specification: Made Of Polyethylene, Non-toxic And Harmless. Color: Transparent White Material: Plastic Capacity: 5ml Packaging: 100pcs/pack Bolo 4 Pieces Specification: Heavy Duty Size: At Least 16 Inches Long Thickness: 3/16 Inches Dishwashing Sponge 10 Pieces Specification: High-density Sponge For Long-lasting Use; Double-sided For Versatile Cleaning Options Material: High-density Sponge Size: 10cm X 7cm X 3cm Native Hat 5 Pieces Specification: High Quality Size: 18-22 Diameter Raincoat 10 Sets Specification: Coat With 2 Pockets And Pants (good Quality), Sizes: (4) Large, (4) Xl, (2) Xxl, Thickness: 0.33mm Material: 100% New Pvc Boots 10 Pairs Specification: Durable Rubber, Waterproof, Slip Resistance Size: X-large, Chest Wader 5 Piece Specification: Water Proof, Breathable, High Quality, Anti-slip Pvc Boots, Elasticated Top Size: X-large, High Quality Material: Pvc Color: Black/blue Shoe Size: 42 Thickness: 0.45mm Rechargeable Flash Light 10 Piece Specification: Outdoor Flashlight Illuminant: Four Led Lamp Beads Light Distance: 500-1000m Battery: 1*18650 Lithium Batteries Brightness Level: Strong Light, Normal Light, Weak Light, Flashing Light, Sos Material: Aluminum Alloy Shell Weight: 278g Standby Time: 4-8h Charging: Usb Submersible Aquarium Water Heater 10 Piece Specification: Heater 300w (15-35°c), Installation - 300w Submersible Heater Is Suitable For 35 To 80 Gallons Aquariums Hacksaw 10 Piece Specification: Steel Material Length: 45.5cm Width: 9.5cm Storage Box (plastic) 7 Piece Specification: Heavy Duty Length: 78cm Width: 41cm Height: 16cm Capacity: 40l Color: Frost Clear Storage Box (plastic) 10 Piece Specification: Heavy Duty Length: 39cm Width: 29.5cm Height: 25cm Capacity: 20l Color: Frost Clear Pails With Cover 5 Piece Specification: Heavy Duty Color: White Capacity: 10l Hand Towels 10 Piece Specification: Coton Hand Towel Color: Black Size: 30x50cm Basin (small) 10 Piece Specification: Color: White Shape: Round Height: 5 Inches, Diameter: 10 Inches Material: High Quality Plastic Basin (medium) 10 Piece Specification: Color: White Shape: Round Height: 8 Inches Diameter: 10 Inches Material: High Quality Plastic Basin (large) 10 Piece Specification: Color: White Shape: Round Height: 8 Inches Diameter: 30 Inches Material: High Quality Plastic Welding Rod 10 Packs Specification: Size: 2.5 Mm(3/32'') X 300mm Packaging: 1kg/pack Pvc Pipes (ppr) 30 Pieces Specification: 1m X 1.5m Color: Blue Pipe Pvc Pipes Elbow (ppr) 30 Pieces Specification: 2 Heads (19mm In Each Head) Inner Diameter: 25mm Height: 52mm Thickness: 2.7mm Weight: 18g Material: Pvc Type Wire Cutter 3 Pieces Specification: Item Type: Wire Stripping Tool Size: 8 Inches Material: Chrome Vanadium Steel + Abs Stripping Range: 24-10awg Insulated Terminal Crimp: 22-10awg Non-insulated Terminal Crimp: 22-18awg Pliers 3 Packs Specification: Anti-skid Handle Stripping Function Stripping Blade Is Screwed Up Wire Cutting, Wire Stripping Function Clamp Head Symmetrical Functional Teeth Clear, Holding Objects With That Solid. Edge, Double Heat Treatment,cutting Effect More Perfect. Packaging: 5 In 1 Combination/pack Silk Screen 3 Meters Specification: N-toxic, Strong Wrinkle Resistance, Good Elasticity, Screen Mesh: 150 Microns Mesh Silk Screen 3 Meters Specification: N-toxic, Strong Wrinkle Resistance, Good Elasticity, Screen Mesh: 250 Microns Mesh Lime 5 Sacks Specification: Agricultural Grade Packaging: 25 Kg/sack Inorganic Fertilizer 5 Sacks Specification: (16-16-16) Packaging: 50kg/sack Chicken Manure 30 Sacks Specification: Dry Chicken Manure; Ready To Apply In Ponds Packaging: 25kg/sack Plastic Bowl 20 Pieces Specification: Mouth Diameter: 13.25 Cm Height: 5 Cm Color: White Microwavable Container 10 Packs Specification:25 Oz Round Container Dimensions (approximate): Height: 9 Cm Diameter: 9.5 Cm Packaging: 10 Pieces/ Pack Sickle (karit) 5 Pieces Specification: Excellent Stainless Steel Sickle, High-quality Material Selection, Hard Edge, Sharp And Practical, Non-slip Handle, Comfortable Grip Shape: Moon Bud Length: 11cm Electric Breaker 3 Units Specification: High Quality 60amp Nylon Tansi 4 Rolls Specification: Nylon Material Size: 3.0 Mm Styro Foam Box 5 Pieces Specification: Jumbo Width: 17 Inches Length: 34 ¾ Inches Height: 23 ½ Inches Dipper 20 Piece Specification: Plastic Material Inner Length 14cm, Height: 11cm Electrical Tape 10 Pieces Specification: High Quality, Flame Retardant Body Size: 0.16mm X 19mm X 16mm Color: Black Electric Switch (1 Way) 5 Pieces Specification: Modern And Classy Current: 10a Voltage: 220v Fry Bag 7 Packs Specification: Pe Size: 20 X 30 X 0.025, Packaging: 100sheets/ Pack Isoprophyl Alcohol 10 Gallons Specification: 70% Alcohol; Floral Scent Packaging: 3.2liter/1gallon Algal Paste 10 Packs Specifications: Chlorella Vulgaris Packaging: 500g/pack Commercial Tilapia Feed (fry Mash) 20 Bags Specifications: Crude Protein: 42%crude Fat: 5%crude Fiber: 5%crude Ash: 16%moisture: 12% Packaging: 25kg/bag Commercial Tilapia Feed (starter) 20 Bags Specifications: Extruded/ Floating Crude Protein: 34% Crude Fat: 7% Crude Fiber: 5% Crude Ash: 12% Moisture: 12%" Pellet Size: ⌀2.8-3.2mm Packaging: 25kg/bag Commercial Tilapia Feed (grower) 20 Bags Specifications: Extruded/ Floating Crude Protein: 31% Crude Fat: 6% Crude Fiber: 6% Crude Ash: 12% Moisture: 12%"" Pellet Size: ⌀3.3-3.7mm Packaging: 25kg/bag ---nothing Follows--- The Items Listed Are To Be Used For The Implementation Of The Project 2024-fbc-04 2 Agricultural Supplies For Rearing Of Mudfish 1 Lot Lime 5 Kg Specification: Agricultural Grade Inorganic Fertilizer 5 Kg Specification: 16% Nitrogen, 16% Phosphorus, And 16% Potassium Chicken Manure 5 Kg Specification: Dry Chicken Manure; Ready To Apply In Ponds Fine Mesh Net 5 Roll Specification: 50 Yards/roll Color: White B-net Double Width 10 Roll Specification: 50 Yards/roll Color: Black Fieldworker Long Sleeves 100 Piece Specification: With Reflector Strip, Work-resistant Sizes: 20 Small 20 Medium 40 Large 20 X-large Color: Royal Blue Air Hose 5 Roll Specification: High Quality Size: Inner Diameter 4mm, Outer Diameter 6mm Packaging: 200 Meters/roll Yeast 10 Pack Specification: Instant Dry Yeast Packaging: 500 G Per Pack First Aid Kit 2 Kit Specification: Plastic Medical Kit, Has Multiple Compartments, And Provide Instructions And First Aid Manuals Content List: No Commodity Name Specification + Quantity 1 Pair Of Scissors 1 Piece Tweezers 2 Pieces Of Sterile Gauze Pad 7.5x7.5cm 5 Pieces Masks 9x17cm 3 Pieces Confirmation Bandage 7.5cm X 4.5m 1 Piece Self-adhesive Bandage 2.5cm X 4.5m 2 Pieces Tape 1.25cm X 5m 50 Pieces Alcohol Pad 3x6cm 10 Pieces Iodine Pad 5x5cm 50 Pieces Band-aids 7.2*1.9cm 1 Piece Wound Dressing 6*7cm 1 Piece Wound Dressing 6*10cm 1 Pack Safety Pin 2#20 1 Piece Burn Dressing 60x40cm 1 Piece First Aid Guide Galvanized Iron Pipe 30 Pieces Diameter: 15mm (1/2 Inch) Length: 200mm (8 Inches) Thickness: 1.80mm Fish Meal 1 Sack Packaging: 25 Kg/sack Soybean Meal 1 Sack Packaging: 25 Kg/sack Copra Meal 1 Sack Packaging: 25 Kg/sack Vitamin Mix 2 Packs Packaging: 1 Kg/pack Mineral Mix 2 Packs Packaging: 1 Kg/pack Rice Bran 1 Sack Packaging: 25 Kg/sack Astaxanthin 7 Packs Packaging: 20g/pack ---nothing Follows--- The Items Listed Are To Be Used For The Implementation Of The Project 2024-fbc-06 Note: *delivery Place: Fisheries Biotechnology Center, Bfar-nftc, Science City Of Muñoz, Nueva Ecija *delivery Terms: Should Be Strictly Up To 60 Calendar Days

Details: Description Itb No.046.24- 1 Lot Cardiac Telemetry Monitoring System One (1) Lot Cardiac Telemetry Monitoring System (109 Transmitters/monitors And Sets Of Central Monitoring Station, 4 Units Portable Minimally Invasive Cardiac Output Monitors 1 Centralized Monitoring System) 1. Description: A System That Allows Continuous Cardiac Monitoring Of Ambulatory Adult And Pediatric Patients 2. Operational Requirements System Complete With All Accessories As Specified In The Technical Specifications Below. 3. Technical Specifications A. Transmitters/monitors And Sets Of Central Monitoring Station 1. Ecg 1.1 Provides Up To At Least 8 Leads Ecg Waveforms 1.2 Supports 3 – 6 Lead Ecg Cables 1.3 Able To Recognize Abnormal Rhythms, Leads Off And Produce A Subsequent Alarm 1.4 Hr Detection From 30-300 Beats Per Minute 1.5 Simultaneous Analysis Of At Least 4 Leads (user-defined) Qrs Detection 2. Spo2 2.1 Transmitted From Either Finger Or Skin Probe 2.2 For Adult: Each Unit Must Have 2 Pieces Of The Following Sizes Of Finger Probe 2.2.1 Small Adult 2.2.2 Regular Adult 2.3 For Pedia: Each Unit Must Have 2 Pieces Of The Following Sizes Of Reusable Wrap Sensor (with Compatibility To Disposal Type) 2.3.1 Neonate 2.3.2 Infant 2.3.3 Child 2.4 Range: 0-100% 2.5 Accuracy: 70-100% 2.6 Perfusion Indicator Range: 0.05 – 20% 3. Pulse Rate 3.1 Pr Detection From 20- 300 Beats Per Minute 3.2 Pr Accuracy +3 Bpm 4. Nibp 4.1parameters: Systolic, Diastolic And Mean 4.2 Range: Parameters Lowest Highest Systolic 25 Mmhg 290 Mmhg Diastolic 10 Mmhg 210 Mmhg Mean 15 Mmhg 270 Hg 4.3 Cuff Inflation Time: 30 -120 Seconds 4.4 Modes: Manual And Automatic 4.5 Interval In Automatic Mode: From 5 Minutes Up To 480 Minutes 4.6 Accuracy: + 5mmhg 4.7 Method: Oscillometric 4.8 With Variable Cuff Sizes Fit For Adult Patients 4.8.1 12 Cm X 22 (small Adult With Arm Circumference 18-26cm) – 5 Pieces/transmitter 4.8.2 16 Cm X 30 Cm (regular Adult With Arm Circumference 25 – 35cm) – 5 Pieces/ Transmitter 4.8.3 16 Cm X 36 Cm (large Adult With Arm Circumference 33 – 47cm) – 80 Pcs/lot 4.8.4 16 Cm X 42 Cm (extra-large Adult With Arm Circumference 45 -66cm) – 40 Pcs/lot 4.9 With Variable Cuff Sizes For Pediatric Patients 4.9.1 6 Cm X 12 Cm (infant With Arm Circumference 10-19 Cm)- 5 Pieces/ Transmitter 4.9.2 8 Cm X 22 Cm (child With Arm Circumference 15-21 Cm)- 5 Pieces/ Transmitter 4.9.3 10 Cm X 22 Cm (young Adult With Arm Circumference 20-26 Cm) – 5pieces/ Transmitter 4.9.4 13 Cm X 28 Cm (adult With Arm Circumference 25-34 Cm) 5 Pieces/ Transmitter 5.transmission 5.1 To Operate At Industrial Standard Wi-fi 2.4ghz/5ghz Compatible With Phc Network 5.2 Distance Range Of At Least 500 Meters 5.3 With Secure Data Transmission 5.4 With Signal Strength Indicator 6. Battery 6.1 Rechargeable Lithium-ion Battery 6.2 Charging Time: Up To 12 Hours 6.3 Full Charge Running Time: 36-48 Hours 6.4 With Overcharge Protection 6.5 Battery Status Indicator 6.6 Charging Dock For Transmitter Units 6.7 Power Input To Be 110-220vac, 60hz, Single Phase, Fitted With Phc Electrical Outlet 6.8 With Two (2) Extra Batteries Per Transmitter 7. Physical Attributes 7.1 Lcd Screen Diagonal Measuring 50-100mm 7.2 At Least 480 Pixels X 320-pixel Resolution 7.3 Touchscreen 7.4 Displays Patient’s Details (i.e. Name, Hospital Number, Room/bed Number) 7.5 Displays At Least 2 Waveforms And 3 Numerical Parameters 7.6 Display Lock On/off System 7.7 Built-in Device Positioning System 7.8 Audible And Visual Alarms For Parameter Abnormalities, Battery Status, Out-of-range 7.9 With Alarm Lamp And Speaker 7.10 With 1.2 – 1.5meters Drop Protection 7.11 Waterproof, With An Ingress Protection Rating Of Not Lower Than Ipx7 7.12 With A Built-in Nurse Call Button 7.13 Dimensions: 120-140mm(h) X 60-90mm(w) X 20-40mm(d) 7.14 Weight: 200-900g (including Battery) 7.15 With Water-resistant Sling Pouch 7.16 With Laminated Guide For Troubleshooting Equipment Failure 8.central Monitoring (nurses Stations) 8.1 Master/slave Structure With Lcd Display Monitors Of At Least 32” In Size And Resolution Of At Least 1280 X 1024 8.2 Sets Of Central Monitoring Stations With Display Monitors For Each Station 8.2.1 For 3b – 2 Sets Central Monitoring Stations With 2 Display Monitors To 14-16 Transmitters/monitor 8.2.2 For 3c, 4e, 4f, 4g - 4 Sets Central Monitoring Stations With 3 Display Monitors To 25 Transmitters/monitors 8.3 Each Display Monitor Shall Be Capable Of Showing In Real-time The Following: 8.3.1 Seven (7) To Fourteen (14) Ecg Traces 8.3.2 Patient Identification 8.3.2 Associated Parameter Displays (numeric And Waveform) 8.4 Multi-lead Arrhythmia Analysis With At Least 25 Alarms 8.5 Capable Of Real-time Analysis And Historical Trend Analysis Of At Least Up To 72 Hours 8.6 With Built-in Transmitter Device Locator 8.7 Capable Of Wireless Transmission To A Remote Centralized Monitoring System/command Center 9. Strip Chart Printer 9.1 Printer For Single/dual Channel Recordings Complete With All Pertinent Information Such As Patient Name, Date & Time Of Recording 9.2 Can Be Manually Started Either From The Transmitter/monitor Or The Central Station 9.3 Quantity: 5 Units 10. Network Printer 10.1 Printer For Trend Graph, Waveform Information Or Any Data As Displayed On The Monitor 10.2 Laser Type And Support Use Of Plain Paper (a4 Or Letter Size) 10.3 Quantity: 5 Units B. Portable Minimally Invasive Cardiac Output Monitors 1. Ecg 1.1. Provides Up To At Least 8 Leads Ecg Waveforms 1.2 Supports 3 – 6 Lead Ecg Cables 1.3 Able To Recognize Abnormal Rhythms, Leads Off And Produce A Subsequent Alarm 1.4 Hr Detection From 30-300 Beats Per Minute 1.5 Simultaneous Analysis Of At Least 4 Leads (user-defined) Qrs Detection 2. Spo2 2.1 Transmitted From Either Finger 2.2 For Adult: Each Unit Must Have 2 Pieces Of The Following Sizes Of Finger Probe 2.2.1 Small Adult 2.2.2 Regular Adult 2.3 For Pedia: Each Unit Must Have 2 Pieces Of The Following Sizes Of Reusable Wrap Sensor (with Compatibility To Disposal Type) 2.3.1 Neonate 2.3.2 Infant 2.3.3 Child 2.4 Range: 0-100% 2.5 Accuracy: 70-100% 2.6 Perfusion Indicator Range: 0.05 – 20% 2.7 With The Capability Of Measuring Perfusion Index (to Be Able To Use It For Preload Responsiveness Assessment 3. Pulse Rate 3.1 Pr Detection From 20- 300 Beats Per Minutes 3.2 Pr Accuracy +3 Bpm 4. Nibp 4.1parameters: Systolic, Diastolic And Mean 4.2 Range: Parameters Lowest Highest Systolic 25 Mmhg 290 Mmhg Diastolic 10 Mmhg 210 Mmhg Mean 15 Mmhg 270 Mmhg 4.3 Cuff Inflation Time: 30 -120 Seconds 4.4 Modes: Manual And Automatic 4.5 Interval In Automatic Mode: From 5 Minutes Up To 480 Minutes 4.6 Accuracy: + 5mmhg 4.7 Method: Oscillometric 4.8 With Variable Cuff Sizes Fit For Adult Patients 4.8.1 12 Cm X 22 (small Adult With Arm Circumference 18-26cm) – 5 Pieces/transmitter 4.8.2 16 Cm X 30 Cm (regular Adult With Arm Circumference 25 – 35cm) – 5 Pieces/transmitter 5. Side Stream Capnography 5.1 Measurement Range: 0-150 Mmhg, 0-19% 5.2 Warm Up Time: Less Than 10 Seconds 5.3 Accuracy: 0-40 Mmhg + 2 Mmhg 41-70 Mmhg + 5% Of Reading 71-100 Mmhg + 8% Of Reading 101-150 Mmhg + 10% Of Reading 5.4 Respiration Rate: 2 To 150 Breaths Per Minute 5.5 Respiration Accuracy: + 1 Breath Per Minute 5.6 Provision Of Etco2 Airway Adaptors (both For Intubated Patients And On Non-invasive Ventilatory Support.) 5.6.1 Single Patient Use 5.6.2 Disposable 5.6.3 Non- Sterile 5.7. Material: Plastic 5.8 Provision Of 1 Set Airway Adaptor Per Unit 6. Minimally Or Completely Non- Invasive Cardiac Output 6.1 With Software For Determining Minimally/ Completely Noninvasive Cardiac Output 6.2 The Noninvasive Cardiac Output Capability Of The Monitor Must Not Require The Use Of An Invasive Arterial/central/ Or Pulmonary Artery Catheter 6.3 Accuracy And Precision Of The Noninvasive Cardiac Output Monitor Must Be Comparable To Existing Gold Standard Methods Of Cardiac Determination (such As Either The Indirect Fick's Determination Of Cardiac Output Or Even Thermodilution Cardiac Output Determination) 6.4 Reusable Sensors/probes For Noninvasive Cardiac Output Determination 7. Physical Attributes 7.1 Monitor: Light Weight: Minimum Of 3 And Maximum Of 5 Kg 7.2 Display: 7.2.1 Size: Minimum Of 6 And Maximum Of 8 Inches 7.2.2 Touchscreen Operation 7.2.3 Lcd Or Led Color Display With Minimum Resolution Of > 1024 X 768 Pixels 7.3 Data Storage: At Least 48-72 Hours 7.4 With Stainless Cart Stand With 4-5 Wheel Caster With Lock 7.5 Utility Basket With Hooks 7. 6 Swivel Adjustment 7.8 With Built-in Printer 7.9 Back –up Battery Of At Least 4 Hours Or More C. 1 Centralized Monitoring System/command Center 1. Monitor 1.1 Size: At Least 65 Inches 1.2 Display:non-touch Screen Operation 1.3 Lcd Or Led Color Display 1.4 Capable Of Showing In Real-time The Following: 1.4.1 Sixteen (16) To Twenty (20) Patients With Either Single Or Dual Display 1.4.1associated Parameter Displays (numeric And Waveform) 1.4.2 Multi-lead Arrhythmia Analysis 1.4.3 Freeze The Ecg Waveform Image 1.5 Quantity: 6 Monitors 1.6 Provision Of Mouse And Keyboard Per Monitor 2. Alarms 2.1 Configurable Alarm Settings And Alarm History: Audible And Visual 2.2 Display All The Alarm Functions Of The Bedside Machine And Give Warnings According To The Alarm Priority. 2.3 Alarm Grading: Set The Alarm Grade For Each Parameter And Event, Including Normal, Serious, And Emergency. 2.4 Set The Upper And Lower Alarm Limits 2.5 With Integrated Ai For Selecting The Critical Parameters Of Patients Based On The Set Alarm. 3. Storage: Capable Of Real-time Analysis And Historical Trend Analysis Of At Least Up To 72 Hours Or More 3. 1 Save The Trend Data List Of All Physiological Parameters Within 72 Hours 3.2 Save And Review The Ecg Waveforms And Arrhythmia Waveforms Within 72 Hours 3.3 Save The Non-invasive Blood Pressure, Heart Rate, Pulse Rate, Pulse Oxygen Saturation, Respiration Rate Within 72 Hours 4. Connection 4.1 Full Connection To The Phc Network. 5. Printer 5.1 Printer For Trend Graph, Waveform Information Or Any Data As Displayed On The Monitor 5.2 Laser Type And Support Use Of Plain Paper (a4 Or Letter Size) 5.3 Quantity: 2 Units 6. Installation 6.1 Monitors Should Be Wall-mounted 6.2 Installation To Be Shouldered By The Bidder 7. Remote Mobile Tablet 7.1 Provision Of Remote Hand-held Mobile Tablet 7.2 Allow End Users To Be Mobile While Inside Phc Premises 7.3 Capable Of Command Center Remote Monitoring 4. Power Supply 4.1 Input: 220 – 240 Vac, 60 Hz Fitted With Phc Outlet, 3 Prong 4.2 Resettable Over-current Breaker To Be Fitted For Protection 4.3 Suitable Ups With Maintenance-free Batteries For A Minimum Of 30 Minutes Of Backup Should Be Supplied With The System 5. Environmental Factors 5.1 The Unit Shall Be Capable Of Being Stored/used Continuously In Ambient Temperature Of 0-50 Deg C And Relative Humidity Of 15-90% 5.2 The Unit Shall Be Capable Of Operating In Ambient Temperature Of 20-30 Deg C And Relative Humidity Of Less Than 70% 5.3 Shall Meet Iec -60601-1-2: 2001 Or Equivalent Bis (general Requirements Of Safety For Electromagnetic Compatibility Or Should Comply With 89/366 /eec; Emc- Directive 6. Standards, Safety And Training 6.1 Manufacturers/suppliers Should Be Iso 13485 Certificate To Quality Standard 6.2 Should Be Fda Approved 6.3 Ce, Ui Or Bis Approved Product 6.4 Comprehensive Technical Training For Phc Biomed And User’s Training To Staff For Familiarity With The System 6.5 Electrical Safety Conforms To Iec 60601-1 General Requirements Or Its Equivalent (international/national Standard) 6.6 Warranty/parts And Services 6.6.1 Comprehensive Three (3) Years Warranty On Equipment 6.6.2 Ten (10) Years Availability Of Spare Parts In The Marker 6.6.3 Three (3) Years Services And Spare Parts Warranty Inclusive Of Semi-annual Preventive Maintenance 6.6.4 Annual Calibration. Certificate During The Warranty Period. 6.7 Delivery Period: 90 Calendar Days 7. Documentation 7.1 User/technical/maintenance Manuals To Be Supplied In English And Must Provide Hard And Soft Copy 7.2 Certificate Of Calibration And Inspection 7.3 List Of Important Spare Parts And Accessories With Their Part Number Costing 7.4 Logbook With Instructions For Maintenance Checklist (daily, Weekly, Monthly & Quarterly). The Job Description Of Hospital Technician And Company Service Engineer Should Be Clearly Stated. 7.5 List Of Equipment Available For Providing Calibration And Routine Maintenance Support As Per Manufacturer Documentation In Service /technical Manual 7.6 Compliance Report Submitted In A Tabulated And Point-wise Manner Clearly Mentioning The Page Number Of The Original Catalogue/data Sheet. 7.7 Duly Notarized Certificate Of Exclusive Or Authorized Distributorship 7.8 Similar Largest Completed Contract For The Last 3 Years

Details: Description Item No. Specifications Qty Unit Statement Of Compliance Supply And Delivery Agricultural Supplies For The Implementation Of Fisheries Biotechnology Center (fbc) Projects Under Maridep 1 Agricultural Supplies For Rearing Of Climbing Perch 1 Lot Seine Net 1 Piece Specification: Size: 2m Depth X 2.5m Long Mesh Size: 6mm Packaging: With Floaters Inclusion Hand Towel 30 Pieces Specification: Cotton Color: White Size:25cm X 40cm Air Stones 50 Pieces Specification: Cylindrical Air Stone Size: 2 Inches Color: White T- Connector 50 Pieces Specifications: Material: Pvc Color: White Size: Approx. Length 3.8cm/1.50 Inches, Suitable For 4mm/0.16 Inches Tube Weight: Approx. 2g Air Regulator 50 Pieces Specifications: Plastic Color: White Connector Diameter: Approx. 4mm Suitable For 4mm Inside Diameter Air Connector Specification: X-shape Material: Plastic Color: White 50 Pieces Portable Air Pump Specification: Double Output Watts: 5 Input Power: Ac 220v-240v/50hz 20 Pieces Fine Mesh Net (roll) 2 Rolls Specification: 50 Yards/roll Color: White Scoop Net 10 Pieces Specification: Mesh Type (cloth) Mesh Size: (150 Um) Size: 12 Inches Shape: Round Scoop Net (small) 5 Pieces Specification: Mesh Type (cloth) Mesh Size: (150 Um) Size: 3 Inches Shape: Square Scoop Net (medium) 5 Pieces Specification: Mesh Type (cloth) Mesh Size: (150 Um) Size: 4 Inches Shape: Square Scoop Net ( Big) 10 Pieces Specifications: Mesh Type Mesh Size: (150 Um) Size: 3 Inches Shape: Square B- Net, Double Width (roll) 3 Rolls Specification: 50 Yards/roll Color: Black Organza Cloth (roll) 3 Rolls Specification: Frosted Organza Fabric Color: White Packaging: 50yards/roll B/r Nylon Twine (roll) 10 Rolls Specification: Cotton Sizes: Large Color: Black Packaging: 50meters/roll Plankton Net/ Silk Screen 5 Pieces Mesh Size:(400um) Packaging: 1.65m X 1m Plankton Net/ Silk Screen 5 Pieces Mesh Size: (250um) Packaging: 1.65m X1m Plankton Net/ Silk Screen 4 Pieces Specification: Mesh Size: (0.5um) Packaging: 1.65m X1m Strainer (big) 8 Pieces Specification: Plastic Fine Mesh With Strainer Size: Large Nylon Thread 5 Rolls Specification: White Packaging: 300m/roll Rope (#10) 2 Rolls Specification: High Quality Thickness: 10mm Color: Orange Packaging: 200m/ Roll Rope (#8) 3 Rolls Specification: High Quality Thickness: 8mm Color: Orange Packaging: 200m/ Roll Rope (#6) 3 Rolls Specification: High Quality Thickness: 6mm Color: Orange Packaging: 200m/ Roll Plastic Tub 5 Tubs Specification: Capacity: At Least 50l/tub Diameter: At Least 47cm Height: At Least 60cm Digital Weighing Scale 5 Pieces Specification: Capacity: 3g Display: Led Readability: 0.0001g Stainless Casserole With Cover 2 Pieces Specification: Material: 201 Stainless Steel Style：american-style Application Scenarios：commercial Applicable Object：gas Stove Universal Pot Type：single Bottom Size: At Least 35cm Weighing Scale 5 Pieces Specification: High Quality Stainless Steel Spring Weighing Platform Scale Capacity: 10kg Size Of Scale: 14cm X 20cm X 20cm Size Of Bowl: 21cm X 4.5cm Material: Stainless Steel Color: Gray And Blue Knife Specification: Material: Stainless Steel Size: 8 Inches 10 Pieces Chopping Board 5 Pieces Specification: Size: 60×40 Cm Thickness: 1.8 Cm Color: White Material: Plastic (food Grade) Hand Gloves 5 Pairs Specification: Rubber, Oil-resistant, Abrasion-resistant, Non-slip Size: Free-size Faucet 10 Pieces Specification: Steel, 2 Way Function, Heavy Duty, Long Lasting Material: Zinc Aloy, Chrome Plated Color: Silver Size: 97mm X 20mm X 57mm Galvanized Iron Pipe 30 Pieces Diameter: 15mm (1/2 Inch) Length: 200mm (8 Inches) Thickness: 1.80mm Extension Cord 10 Pieces Specification: Heavy Duty Maximum Currency: 6a 1500w; Four (4) Gang With 2 Usb Port And With Master Switch Rated Voltage 127v/220v~250v Frequency: 50/60hz Length: At Least 5 Meters Plastic Laundry Brush 5 Pieces Specification: High-quality Push Brush With Handle (plastic) Handle Height: 96cm; Width: 25cm Paint Thinner 3 Bottles Specification: Color Less Packaging: 350ml/bottle Pail W/ Cover 10 Pieces Specification: Premium Design Plastic Handle Volume Capacity: 12 Liter Size: 26.5 X 31 Cm Flat Bar 3 Pieces Specification: Width: 1 ½ Inches Thickness: 3/16 Inches Length: 6.0 Meter Angle Bar 3 Pieces Specification: Width: 1 ½ Inches Thickness: 3/16 Inches Length: 6.0 Meter Iron Bar 3 Pieces Specification: Thickness: 16 Mm Length: 48 Inches Fluorescent Lights 4 Pieces Specifications: 18 Watts Color Temperature: Daylight Light Bulb 9 Pieces Specification: Led Bulb; Lasts Up To 10 Years; 85% Energy Saving; Beam Angle: 290° Ac Input: 220 - 240v Average Lifetime: 20,000 Hours Watts: 18 Air Hose 5 Rolls Specification: High Quality Inner Diameter: 4mm Outer Diameter: 6mm Packaging: 200 Meters/roll Carbouy Container (food Grade) 60 Piece Specification: Heavy Duty Color: Transparent Capacity: 20l Vernier Caliper 5 Pieces Specification: Heavy Duty And High Quality Size: 6 Inches (150mm) Material: Plastic Disposable Pasteur Pipette 5 Packs Specification: Made Of Polyethylene, Non-toxic And Harmless. Color: Transparent White Material: Plastic Capacity: 5ml Packaging: 100pcs/pack Bolo 4 Pieces Specification: Heavy Duty Size: At Least 16 Inches Long Thickness: 3/16 Inches Dishwashing Sponge 10 Pieces Specification: High-density Sponge For Long-lasting Use; Double-sided For Versatile Cleaning Options Material: High-density Sponge Size: 10cm X 7cm X 3cm Native Hat 5 Pieces Specification: High Quality Size: 18-22 Diameter Raincoat 10 Sets Specification: Coat With 2 Pockets And Pants (good Quality), Sizes: (4) Large, (4) Xl, (2) Xxl, Thickness: 0.33mm Material: 100% New Pvc Boots 10 Pairs Specification: Durable Rubber, Waterproof, Slip Resistance Size: X-large, Chest Wader 5 Piece Specification: Water Proof, Breathable, High Quality, Anti-slip Pvc Boots, Elasticated Top Size: X-large, High Quality Material: Pvc Color: Black/blue Shoe Size: 42 Thickness: 0.45mm Rechargeable Flash Light 10 Piece Specification: Outdoor Flashlight Illuminant: Four Led Lamp Beads Light Distance: 500-1000m Battery: 1*18650 Lithium Batteries Brightness Level: Strong Light, Normal Light, Weak Light, Flashing Light, Sos Material: Aluminum Alloy Shell Weight: 278g Standby Time: 4-8h Charging: Usb Submersible Aquarium Water Heater 10 Piece Specification: Heater 300w (15-35°c), Installation - 300w Submersible Heater Is Suitable For 35 To 80 Gallons Aquariums Hacksaw 10 Piece Specification: Steel Material Length: 45.5cm Width: 9.5cm Storage Box (plastic) 7 Piece Specification: Heavy Duty Length: 78cm Width: 41cm Height: 16cm Capacity: 40l Color: Frost Clear Storage Box (plastic) 10 Piece Specification: Heavy Duty Length: 39cm Width: 29.5cm Height: 25cm Capacity: 20l Color: Frost Clear Pails With Cover 5 Piece Specification: Heavy Duty Color: White Capacity: 10l Hand Towels 10 Piece Specification: Coton Hand Towel Color: Black Size: 30x50cm Basin (small) 10 Piece Specification: Color: White Shape: Round Height: 5 Inches, Diameter: 10 Inches Material: High Quality Plastic Basin (medium) 10 Piece Specification: Color: White Shape: Round Height: 8 Inches Diameter: 10 Inches Material: High Quality Plastic Basin (large) 10 Piece Specification: Color: White Shape: Round Height: 8 Inches Diameter: 30 Inches Material: High Quality Plastic Welding Rod 10 Packs Specification: Size: 2.5 Mm(3/32'') X 300mm Packaging: 1kg/pack Pvc Pipes (ppr) 30 Pieces Specification: 1m X 1.5m Color: Blue Pipe Pvc Pipes Elbow (ppr) 30 Pieces Specification: 2 Heads (19mm In Each Head) Inner Diameter: 25mm Height: 52mm Thickness: 2.7mm Weight: 18g Material: Pvc Type Wire Cutter 3 Pieces Specification: Item Type: Wire Stripping Tool Size: 8 Inches Material: Chrome Vanadium Steel + Abs Stripping Range: 24-10awg Insulated Terminal Crimp: 22-10awg Non-insulated Terminal Crimp: 22-18awg Pliers 3 Packs Specification: Anti-skid Handle Stripping Function Stripping Blade Is Screwed Up Wire Cutting, Wire Stripping Function Clamp Head Symmetrical Functional Teeth Clear, Holding Objects With That Solid. Edge, Double Heat Treatment,cutting Effect More Perfect. Packaging: 5 In 1 Combination/pack Silk Screen 3 Meters Specification: N-toxic, Strong Wrinkle Resistance, Good Elasticity, Screen Mesh: 150 Microns Mesh Silk Screen 3 Meters Specification: N-toxic, Strong Wrinkle Resistance, Good Elasticity, Screen Mesh: 250 Microns Mesh Lime 5 Sacks Specification: Agricultural Grade Packaging: 25 Kg/sack Inorganic Fertilizer 5 Sacks Specification: (16-16-16) Packaging: 50kg/sack Chicken Manure 30 Sacks Specification: Dry Chicken Manure; Ready To Apply In Ponds Packaging: 25kg/sack Plastic Bowl 20 Pieces Specification: Mouth Diameter: 13.25 Cm Height: 5 Cm Color: White Microwavable Container 10 Packs Specification:25 Oz Round Container Dimensions (approximate): Height: 9 Cm Diameter: 9.5 Cm Packaging: 10 Pieces/ Pack Sickle (karit) 5 Pieces Specification: Excellent Stainless Steel Sickle, High-quality Material Selection, Hard Edge, Sharp And Practical, Non-slip Handle, Comfortable Grip Shape: Moon Bud Length: 11cm Electric Breaker 3 Units Specification: High Quality 60amp Nylon Tansi 4 Rolls Specification: Nylon Material Size: 3.0 Mm Styro Foam Box 5 Pieces Specification: Jumbo Width: 17 Inches Length: 34 ¾ Inches Height: 23 ½ Inches Dipper 20 Piece Specification: Plastic Material Inner Length 14cm, Height: 11cm Electrical Tape 10 Pieces Specification: High Quality, Flame Retardant Body Size: 0.16mm X 19mm X 16mm Color: Black Electric Switch (1 Way) 5 Pieces Specification: Modern And Classy Current: 10a Voltage: 220v Fry Bag 7 Packs Specification: Pe Size: 20 X 30 X 0.025, Packaging: 100sheets/ Pack Isoprophyl Alcohol 10 Gallons Specification: 70% Alcohol; Floral Scent Packaging: 3.2liter/1gallon Algal Paste 10 Packs Specifications: Chlorella Vulgaris Packaging: 500g/pack Commercial Tilapia Feed (fry Mash) 20 Bags Specifications: Crude Protein: 42%crude Fat: 5%crude Fiber: 5%crude Ash: 16%moisture: 12% Packaging: 25kg/bag Commercial Tilapia Feed (starter) 20 Bags Specifications: Extruded/ Floating Crude Protein: 34% Crude Fat: 7% Crude Fiber: 5% Crude Ash: 12% Moisture: 12%" Pellet Size: ⌀2.8-3.2mm Packaging: 25kg/bag Commercial Tilapia Feed (grower) 20 Bags Specifications: Extruded/ Floating Crude Protein: 31% Crude Fat: 6% Crude Fiber: 6% Crude Ash: 12% Moisture: 12%"" Pellet Size: ⌀3.3-3.7mm Packaging: 25kg/bag ---nothing Follows--- The Items Listed Are To Be Used For The Implementation Of The Project 2024-fbc-04 2 Agricultural Supplies For Rearing Of Mudfish 1 Lot Lime 5 Kg Specification: Agricultural Grade Inorganic Fertilizer 5 Kg Specification: 16% Nitrogen, 16% Phosphorus, And 16% Potassium Chicken Manure 5 Kg Specification: Dry Chicken Manure; Ready To Apply In Ponds Fine Mesh Net 5 Roll Specification: 50 Yards/roll Color: White B-net Double Width 10 Roll Specification: 50 Yards/roll Color: Black Fieldworker Long Sleeves 100 Piece Specification: With Reflector Strip, Work-resistant Sizes: 20 Small 20 Medium 40 Large 20 X-large Color: Royal Blue Air Hose 5 Roll Specification: High Quality Size: Inner Diameter 4mm, Outer Diameter 6mm Packaging: 200 Meters/roll Yeast 10 Pack Specification: Instant Dry Yeast Packaging: 500 G Per Pack First Aid Kit 2 Kit Specification: Plastic Medical Kit, Has Multiple Compartments, And Provide Instructions And First Aid Manuals Content List: No Commodity Name Specification + Quantity 1 Pair Of Scissors 1 Piece Tweezers 2 Pieces Of Sterile Gauze Pad 7.5x7.5cm 5 Pieces Masks 9x17cm 3 Pieces Confirmation Bandage 7.5cm X 4.5m 1 Piece Self-adhesive Bandage 2.5cm X 4.5m 2 Pieces Tape 1.25cm X 5m 50 Pieces Alcohol Pad 3x6cm 10 Pieces Iodine Pad 5x5cm 50 Pieces Band-aids 7.2*1.9cm 1 Piece Wound Dressing 6*7cm 1 Piece Wound Dressing 6*10cm 1 Pack Safety Pin 2#20 1 Piece Burn Dressing 60x40cm 1 Piece First Aid Guide Galvanized Iron Pipe 30 Pieces Diameter: 15mm (1/2 Inch) Length: 200mm (8 Inches) Thickness: 1.80mm Fish Meal 1 Sack Packaging: 25 Kg/sack Soybean Meal 1 Sack Packaging: 25 Kg/sack Copra Meal 1 Sack Packaging: 25 Kg/sack Vitamin Mix 2 Packs Packaging: 1 Kg/pack Mineral Mix 2 Packs Packaging: 1 Kg/pack Rice Bran 1 Sack Packaging: 25 Kg/sack Astaxanthin 7 Packs Packaging: 20g/pack ---nothing Follows--- The Items Listed Are To Be Used For The Implementation Of The Project 2024-fbc-06 Note: *delivery Place: Fisheries Biotechnology Center, Bfar-nftc, Science City Of Muñoz, Nueva Ecija *delivery Terms: Should Be Strictly Up To 60 Calendar Days

Details: Description Invitation To Bid For The Procurement Of Supply And Delivery Of Ict Supplies And Accessories 1. The Department Of Agriculture-western Visayas, Through The National Expenditure Program 2025 (early Procurement Short Of Award) Intends To Apply The Sum Three Million Seven Hundred Forty Two Thousand Three Hundred Eighty Nine Pesos (php3,742,389.00) Being The Abc To Payments Under The Contract For Procurement Of Supply And Delivery Of Ict Supplies And Accessories/ib No. 2025-012 (gas). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-western Visayas Now Invites Bids For The Procurement Of Supply And Delivery Of Ict Supplies And Accessories With The Following Specifications: Adapter, Hdmi To Hdmi Hdmi Male To Hdmi Female Cable Adapter, 4k@60hz, Maximum Uhd 3840×2160,backwa Rds Compatible 2560x1600, 2560x1440, 1920x1200, 1080p Resolutions, 22 Cm Long 1 Piece Adapter, Usb To Hdmi Usb-c + Usb-a To Hdmi Adapter, 2 Ports, Resolution: 1080p@60hz, Advanced Chip, Mirror And Extended Modes 1 Piece Digital Caliper Measuring Tool, Plastic Vernier Caliper Digitalmicrometer With Lcd Screen (0-150mm) 1 Unit Extension Cord With Voltage Surge Protector, 1 Switch Breaker, 6 Outlets With Ground, 5 Meters Long 106 Pieces Flash Drive 16gb, Usb 2.0, Backwards Compatible With Usb 1.1, Read Speed: 100mbps, Write Speed: 100 Mbps 60 Pieces Flash Drive 64gb, Usb 3.0, Backwards Compatible With Usb 2.0, Read Speed: 150mbps 126 Pieces Flash Drive 64gb, Usb 3.2, Gen 1 Compliant, Transfer Speed: 100mb/s2 5 Pieces Flash Drive 256gb, Usb 3.0, Read Speed: 150mbps 103 Pieces Hdmi Cable 2.1 4k 120hz, 48gbps, 7.3mm, Dynamic Hdr & Earc, Including Vrr, Qms, Qft And Allm, 3 Meters Long, Black 2 Pieces Hdmi Cable High Speed Hdmi 2.0, 4k 3d Cable Metal Case, 60hz, 18gbps, Transfer Rates: 10.2 Gbps / 340 Mhz, Hdcp Compliant, 5 Meters Long, Black, 23 Pieces Headlamp Rechargeable, Waterproof, 80 W, 6500 Mah, 4 Hours Bright Light, 9 Hours Weak Light, 50w Aluminum Reflect Cup With Light Led Source 3 Pieces Ink Bottle, Brother Btd60bk, Black, Genuine 29 Bottles Ink Bottle, Brother Bt5000c, Cyan, Genuine 46 Bottles Ink Bottle, Brother Bt5000m, Magenta, Genuine 46 Bottles Ink Bottle, Brother Bt5000y, Yellow, Genuine 46 Bottles Ink Bottle, Hp Deskjet/smart Tank Gt53 Xl Black 51 Bottles Ink Bottle, Hp Deskjet/smart Tank, Gt52 Cyan 53 Bottles Ink Bottle, Hp Deskjet/smart Tank, Gt52 Magenta 53 Bottles Ink Bottle, Hp Deskjet/smart Tank, Gt52 Yellow 53 Bottles Ink Cartridge, Brother Lc539xl, Black 20 Cartridges Ink Cartridge, Brother Lc535xl, Cyan 20 Cartridges Ink Cartridge, Brother Lc535xl, Magenta 20 Cartridges Ink Cartridge, Brother Lc535xl, Yellow 20 Cartridges Ink Cartridge, Brother Toner Cartridge, Tn 2260 10 Cartridges Ink Cartridge, Canon Cl-741, Colored 3 Cartridges Ink Cartridge, Canon Cl-811, Colored 3 Cartridges Ink Cartridge, Canon Pg-740, Black 3 Cartridges Ink Cartridge, Canon Pg-810, Black 3 Cartridges Ink Cartridge, Canon Pixma Pgi-35 Black 45 Cartridges Ink Cartridge Canon Pixma Cli-36 Color 35 Cartridges Ink Cartridge, Canon Pixma Printhead Cartridge, G4010 (black) (bh-7) 10 Cartridges Ink Cartridge, Canon Pixma Printhead Cartridge, G4010 (tri Color) (ch-7) 9 Cartridges Ink Cartridge, Epson C13t664100 (t6641), Black 253 Bottles Ink Cartridge, Hp 682, Black 102 Cartridges Ink Cartridge, Hp 682, Tri-color 181 Cartridges Ink Cartridge, Hp Cn692aa (hp704), Black 15 Cartridges Ink Cartridge, Hp Cn693aa (hp704), Tri-color 9 Cartridges Ink Cartridge, Hp Cz107aa (hp678), Black 31 Cartridges Ink Cartridge, Hp Cz108aa (hp678), Tri-color 31 Cartridges Ink Cartridge, Hp F6v26aa (hp680), Tri-color 350 Cartridges Ink Cartridge, Hp F6v27aa (hp680), Black 354 Cartridges Ink Cartridge, Hp L0s60aa (hp955), Black Original 6 Cartridges Ink Cartridge, Hp L0s63aa (hp955xl), Cyan Original 20 Cartridges Ink Cartridge, Hp L0s66aa (hp955xl), Magenta 20 Cartridges Ink Cartridge, Hp L0s69aa (hp955xl), Yellow 20 Cartridges Ink Cartridge, Hp L0s72aa (hp955xl), Black Original 29 Cartridges Ink Refill, Canon Gi-790bk 67 Bottles Ink Refill, Canon Gi-790c 65 Bottles Ink Refill, Canon Gi-790m 65 Bottles Ink Refill, Canon Gi-790y 65 Bottles Ink Refill, Canon Gi-71bk 4 Bottles Ink Refill, Canon Gi-71c 3 Bottles Ink Refill, Canon Gi-71m 3 Bottles Ink Refill, Canon Gi-71y 3 Bottles Ink Refill, Epson (001) Black 307 Bottles Ink Refill, Epson (001) Magenta 224 Bottles Ink Refill Epson (001) Cyan 219 Bottles Ink Refill, Epson (001) Yellow 215 Bottles Ink Refill, Epson (003) Eco Tank, Black 270 Bottles Ink Refill, Epson (003) Eco Tank, Cyan 194 Bottles Ink Refill, Epson (003) Eco Tank, Magenta 194 Bottles Ink Refill, Epson (003) Eco Tank, Yellow 194 Bottles Ink Refill, Epson (008) Eco Tank, Black 2 Bottles Ink Refill, Epson (008) Eco Tank, Cyan 2 Bottles Ink Refill, Epson (008) Eco Tank, Magenta 2 Bottles Ink Refill, Epson (008) Eco Tank, Yellow 2 Bottles Ink Refill, Epson C13t664200 (t6642), Cyan 186 Bottles Ink Refill, Epson C13t664300 (t6643), Magenta 188 Bottles Ink Refill, Epson C13t664400 (t6644), Yellow 188 Bottles Laser Pointer Laser Class 2, 2 Aaa Battery, 2.4 Ghz Wireless Technology 29 Pieces Maintenance Box, For Epson L6160/l6170, C13t04d100 24 Pieces Male Hdmi To Male Hdmi Cable Hdmi 2.0 Male To Male High Speed 18gbps 4k, 30hz, 1080p, 3d Hdmi Ethernet , 2 Meters Long 2 Pieces Male Usb To Male Hdmi Cable Usb 3.0 Male To Hdmi Male Cable, Support Usb2.0, Usb3.0, Output: 1920x1080p@ 60hz, 2 Meters Long 2 Pieces Memory Card, For Camera Use Extreme Pro Sd Card, 1 Tb, Shot Speed: 140mb/s, Read Performance: 200mb/s, Write Performance: 90mb/s 3 Pieces Micro Sd Card, 128gb, Sequential Read Performance: 140mbps, Transfer Speed: 150 Mb/s 64 Pieces Mouse Pad Non-slip Rubber Base, Fine Knit Edges, 25 X 20 X 0.2 Cm 23 Pieces Otg/dual Usb Drive 128gb, Read Speed: 150mb/s , Write Speed: 100 Mbps 104 Pieces Portable Hard Drive 1 Tb, Usb 3.2, Type C Connector, Read Performance: 1050 Mbps; Write Speed 1000 Mbps 22 Pieces Powerbank, 10000mah 20w, Lithium Polymer Battery, Usb-c Input/output: 20w Max, Usb-a Output: 22.5w Max, Battery Capacity: 37wh (10000mah 3.7v), Rated Capacity: 6250mah (5v 3a) 121 Pieces Powerbank, 20000mah 20w, Lithium Polymer Battery, Usb-c Input/output: 20w Max, Usb-a (out 1/out 2) Output: 22.5w, Battery Capacity: 20000mah 3.7v (74wh), Rated Capacity: 12500mah (typ 5v 3a) 7 Pieces Rechargeable Battery Aa, 1.2v, 2450 Mah, Ni-mh Battery, 2 Pieces/pack 4 Packs Rechargeable Battery Aaa, 1.2 V, 900 Mah, Ni-mh Battery, 2 Pieces/pack 4 Packs Ribbon Cartridge For Epson , For Use With Fx-2175/2190 (so15327, 32.0 Meters/ 104.9 Feet) 9 Pieces Solid State Drive, Portable, 500 Gb, Usb 3.2 Gen 2, Read Speed: 1050 Mb; Write Speed: 1000 Mb (max) W/ Usb C To Usb C Cable & Usb A Adaptors 5 Pieces Solid State Drive 256gb, 2.5 Inch Sata Iii, 6 Gb/s, Read Speed: 500mb/s, Write Speed: 320mb/s, Tbw: 80tb 2 Pieces Solid State Drive 1 Tb, Usb 3.2 Gen , 10gb/s, Read Speed: 1050 Mb/s, Write Speed: 1000 Mb/s 3 Pieces Toner Cartridge, Mx-315ft, Black 5 Pieces Toner Cartridge, Tn118 (konica Minolta Bizhub 215) 11 Cartridges Usb 3.0 Hub, 4 Ports Multi- Splitter Otg Adapter 4 Ports, Usb 3.0 Hub, 5 Gbps Transfer Speed, Supports Two 2.5 Inch Capacity 1 Tb Ssd, Backwards Compatible With Usb 2. 0 (480mbps), Usb 1. 1(12mbps), 1 Meter Long 5 Pieces Usb 3.0 Hub, 6 In 1 Sd Tf For Laptop Pc 6-in-1 Usb 3.0 Hub, Tf/sd Double Card Slot 2.0 Protocol, Applicable For 256g Memory Cards, 5 Gbps Transfer Speed, Micro-usb Power Port, 900ma Output Max Current 5 Pieces Wired Keyboard 12 Fn Multimedia Hotkeys, Resolution: 1000 Dpi, 3 Buttons, Usb Port, Cable Length: 150 Cm 7 Pieces Wireless Mouse 1000 Dpi, 3 Buttons, 2d Scroll Wheel, 2.4 Ghz Wireless Connection, 2.4ghz Wireless Connection W/ Usb Nano Receiver, W/ 1 Aa Battery 170 Units 3-pin Power Adaptor Universal Adapter, Compatible With Various Types Of Sockets 12 Pieces Terms And Conditions: • All Items Which Have An Expiration Period Shall Have An Expiry Date Of At Least Two (2) Years After The Date Of The Notice Of Award • The Supplier Must Submit A Copy Of Manufacturer’s Product Brochures, Specification Sheet, Manuals Etc., As Appropriate Of All The Required Items Or Equipment. Any Of These Evidences Should Be Downloadable From Product Or Manufacturer’s Website Or Otherwise Verifiable By Any Means Reasonable And Acceptable To The Bids And Awards Committee. • Certificate That The Supplier Operates A Commercial Physical Store Indicating The Complete Address Where Ict Products Are Displayed And Available For Purchase. Delivery Of The Goods Is Required Within 90 Calendar Days From Receipt Of Notice To Proceed And To Be Delivered At Da-wesviarc, Hamungaya, Buntatala, Jaro, Iloilo City. Bidders Should Have Completed, Within Three (3) Years (2021-present) From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. The Prospective Bidder Must Be Registered In The Philgeps. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture - Visayas And Inspect The Bidding Documents At The Address Given Below During Office Hours, 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 7, 2024 – November 27, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5,000.00).the Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person. 6. The Department Of Agriculture-western Visayas Will Hold A Pre-bid Conference At 9:30 P.m. On November 15, 2024 At The Rcpc Library, Rcpc Building, Da Wesviarc Compound, Brgy. Buntatala, Jaro, Iloilo City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 9:30 A.m. On November 27, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In The Amount Of Any Of The Acceptable Forms And In The Amount Of Php74,847.78 (if The Bid Security Is In The Form Of Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit) Or Php187,119.45 (if The Bid Security Is In The Form Of Surety Bond). In Lieu Of A Bid Security, The Bidder May Submit A Duly Notarized Bid Securing Declaration That Is An Undertaking Which States, Among Others, That The Bidder Shall Enter Into Contract With The Procuring Entity And Furnish The Required Performance Security Within 10 Calendar Days From Receipt Of The Notice Of Award, And Committing To Pay The Corresponding Fine And Be Suspended For A Period Of Time From Being Qualified To Participate In Any Government Procurement Activity In The Event That It Violates Any Of The Conditions Stated Therein As Required In The Guidelines Issued By The Gppb. 9. Bid Opening Shall Be At 9:30 A.m. On November 27, 2024 At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture-western Visayas Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. The Department Of Agriculture-western Visayas Does Not Condone Any Forms Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 12. For Further Information, Please Refer To: Zarlina B. Cuello Bac Chairperson Da-wesviarc Compound Brgy. Buntatala, Jaro, Iloilo City Tel. No. (033) 320-23-73 Www.westernvisayas.da.gov.ph Procurement@wv.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps November 7, 2024 Zarlina B. Cuello Bac Chairperson

Details: The Piquepierre Bridge is a mixed bridge allowing the crossing of an entrance ramp on the Rn481, a cycle path and SNCF lanes via the Rn 481, in the town of Saint Martin Le Vinoux (38).#x0d; The Works Concern In particular: #x0d; Treatment of Water Inflows (origin of Disorders):#x0d; O Resumption of the waterproofing screed with lateral elevations along the cornices, bridging of the transverse cracks in the deck,#x0d; O Installation of a wearing course,#x0d; O Installation of pavement joints over the entire width of the deck including at the right of the cornices,#x0d; O Resumption of TPC slabs and concrete elevations at the edge of the road, making it possible to eliminate the problems of sealing the edges of the decks, installation of water drop profiles,#x0d; O Installation of gargoyles and evacuation of runoff water in order to limit the volume of water flowing onto the roadway,#x0d; O Repair of downspouts (leaks at elbows and fittings),#x0d; Treatment of Degradations:#x0d; O Resumption of the anti-corrosion protection with complete sandblasting of a part of the metal structure,#x0d; O Reinforcement of the edge beams of deck A (p1a, P2a, P3a, P7a and P14a) and the end braces,#x0d; O Repair of Degraded Concrete Abutments, Piles, Cornices and Walls,#x0d; O Repair of Degraded Concrete Corbelling to the Right of the Tpc,#x0d; O Change Or Removal Of Guardrails (corrosion + Insufficient Height),#x0d; O Change of Retaining Devices (corrosion + Non-compliant),#x0d; O Change of all the bearings on the pier and on the abutments. Installation of shrink-wrapped neoprene bearings with lower boss while maintaining the current operation of the deck (locking on pile, free on abutment),#x0d; O Cornice Protection.#x0d;

Details: Description Qty. Unit Description Lobster Fingerlings (battery Size D) – 638 Pcs Net-fish Net, 4x8 Ft., 90m (100 Yards)/roll, Green Color – 1 Roll Nylon – Size 100 Lbs:60 – 2 Kg Broiler Starter Crumble (50kg) – 9 Sacks Broiler Grower Feeds (50kg) – 12 Sacks Broiler Finisher Feeds – 9 Sacks Mesh Screen (1/2) – 60 Meter Antibiotic (broad Spectrum Antibiotic For Broiler- 12 Box Vitamin B Complex (broiler Vitamins-50ml/bottle) – 3 Bottles Sweet 16 F1 Variety (water Melon) 100 Gms. – 8 Cans Sweet Corn 1kl./pack – 2 Kilo Complete Fertilizer 14-14-14, 50 Kls/sack 14% Ni-14% Phosporos – 14%k20 – 10 Sack Engine Model 0s210 (7.5hp) Engine Displacement 196cc Fuel Tank Capacity 3.6 Fuel Type Gasoline Crankshaft1” 3-31/64 Crankshaft End Tapped Size 7/16-20 Crankshaft Keeway Width ¼” Crankshaft Type Straight Power Output 3.8/5.0 Net Hpbore X Stroke 68mm X 54mm Starting System Recoil – 1 Unit Engine Model Bs177f (9hp) 270cc 4-stroke Ohv Industrial Gas Engine With 1” Keyway Shaft. Dimension: 523x420x480cm – 1 Unit Engine-gasoline, 9hp High Speed, 3600 Rpm, Forced Air Cooling, 4 Stroke, Tilted Design Ohv, Single Cylinder, Recoil Hand Pull Starter – 1 Unit Engine Model Lf188f-bq (13hp) 389cc 4-stroke Ohv Industrial Gasoline Engine With 1” Keyway Shaft. Dimension:19x18x20 Inches – 1 Unit Engine Oil – Sae 20w-40 Api Sf/cd1l – 21 Liter Paint-marine Quick Dry Enamel, Color Green – 7 Gal. Paint-marine Quick Dry Enamel, Color Green – 1 Liter Paint-marine Quick Dry Enamel, Color White – 6 Gal. Paint-marine Quick Dry Enamel, Color White – 1 Liter Ice Box-size: 14 5/8-x10x12 3/8-(lxwxh), White Color – 3 Pcs Seeds-hybrid Rice Seeds Hatao Dinorado – 2 Sacks Rice Seeds – 7 Tonner – 2 Sacks Fertilizer – 14-14-14 Complete Fertilizer, 50kg/sack – 26 Sacks Insectiside-10 Ec, 1l/bottle – 14 Liter Oven Electric (80 Liters) Kw-3340 With Rotisserie Function Durable Stainless Steel Body 2400 Watts Voltage Rating: 230v A.c 60hz Unit Weight: 14.99 Kg. Item Dimension: L=66.7cm W=46.3cm H=44.5cm (with 60 Min Timer With Cooking End Signal With Rotary Temperature And Heater Selector Switch – 1 Set Stand Mixer (7liters) Kw-4513 600 Watts Authentic 16-point Planetary Mixing Action Full Metal Gear System-heavy Duty Mechanism/stainless Steel Mixing Bowl/6-speed Setting With Pulse Control With Hinged Tilt Head Design – 1 Set Baking Pans Aluminum 6” X 3” Round – 2 Pcs. Baking Pans Aluminum 7” X 4” Round – 2 Pcs. Baking Pans Aluminum 6” X 10” Rectangular– 2 Pcs. Drum Cake Board Round Corrugated (box Like) Material 10” 10mm Thickness – 10 Pcs. Drum Cake Board Round Corrugated (box Like) Material 12” 10mm Thickness – 10 Pcs. Drum Cake Board Rectangular Corrugated (box Like) Material 12” 10mm Thickness – 10 Pcs. Whipping Cream 1kg – 5 Kls. All Purpose Flour 25kg. – 1 Sack Cocoa Powder 1 Kg. - 5 Kls. Baking Powder 1kg. – 1kl. White Sugar – 10 Kls. Brown Sugar – 10 Kls. Egg (white) Large – 5 Trays Cream Of Tartar (50grams) – 1 Pack Gas Stove-double Burner, Stainless Top And Front. Automatic Ignition – 4 Pcs. Kawa – Stainless Steel, Medium 41cm Diameter – 2 Pc Strainer- 3 In 1 Stainless Steel, Small: 18x17 Medium: 20x8.5 Large: 23x9.5, 3pcs./set – 4 Pcs. Food Tray - Stainless Steel, 36cm X 27cm X 4.8cm, Rectangle Shape – 8 Pcs. Food Tray - Stainless Steel, 45cm X 35cm X 4.8cm, Rectangle Shape – 8 Pcs. Thong – Stainless Steel, Size: 16 Inches – 9 Pcs Ladle – Stainless Steel, 9cm X 41cm – 11 Pcs Dressed Chicken – 80 Kg French Fries – 20 Kg Fish Ball – 30 Kg Tempura – 20 Packs Kikiam – 20 Packs Oil –cooking Oil, 20l/container – 4 Containers Seasonings (all-in-one Mix) 55g – 4 Packs Soy Sauce 200ml – 40 Packs Catsup 200ml – 40 Packs Cheese-original Flavor, 165g/box – 24 Boxes Breading Mix 62g. – 40 Packs Cellophane-plastic, Size:10” X 14”, 100 Pcs/pack – 20 Packs Hairnet – 25 Pcs. Apron (size:70*71cm Weight: 235g Material: Linen Feature: Waterproof And Antifouling Design) – 16 Pcs. Hand Gloves (cellophane)(50/box) – 12 Boxes Steamer-electric, Stainless, 3-layer Large-capacity – 4 Pcs Hot Cake Molder- Stainless, 4 Hole Mole Cake Mold Baking Double Sided Baking Pan – 2 Pcs Molder – Puto Cheese Cup Molder, Size;2.3x2.3x1 Inch, 100 Pcs/pack - 5 Packs Flour- 3rd Class, Extracted From The Purest, Whitest Part, 25 Kg – 1 Sack Sugar – White, Granulated Refined Cane Sugar, 25kg/sack – 1 Sack Sugar - Brown, 25kg/sack – 2 Sacks Baking Powder – 1kg/pack – 5 Packs Water –lye Water “lihiya”, 1l/gallon – 5 Gallons Plate – 9 Inch Melamine Dinner Plate, Glass, White Color – 80 Pcs. Glass – Drinking Glass, Plain Glass, 250ml – 80 Pcs. Food Warmer-stainless Steel, Rectangular, Heavy Duty, 9.5l Capacity – 5 Pcs Disposable Facemask (3ply) – 7 Boxes Plainer Electric Hand Plainer Wattage =580w, Frequency =60hz Voltage = 220v, Rpm = 15,800/min – 1 Unit Grinder 710w Angle Grinder 4” Continuous Rating Input:710w Wheel Diameter:100mm (4”) Abrasive Disc100mm (4”) Diamond Wheel100mm (4”) No Load Speed 11,000 Rpm Dimensions:25.8 X 11.8 Cm X 9.7 Cm – 1 Unit Drill/driller Professional Electric Drill 320w Coc Gbm Rated Input Power:320w, Weight: 1kg, No-load Speed: 2,500 – 4/200rpm, Chuck Capacity, Min./max.:6.5mm, Drilling Diameter In Wood: 13mm Steel: 6.5mm Features: Variable Speed, Compact Offering For Speedy And Precision Drilling, Reverse Function, For Metal And Wood Drilling – 1 Set Saw Portable Circular Saw 185mm Disc Blade, 1500 Watts, N 0-5000 R/min Jigsaw 220volts, 650watts, 3000/m 50/60hz – 1 Unit Grinder Bench Grinder Rated Power;180 Watts Speed:2950 Rpm Frequency:60hz,rated Viltage:220v Grinder Wheel Dimension:125x16x12.7mm Blade Diameter: 5” Inches – 1 Unit Tri-square Measure Length:10/25cm; Ruler Size:10x4.5(l*w)/25.3cm X 11.4cm (l*w) Color: As Picture Shown – 1 Pc Hammer Specifications: Handle Size 27.5cm Long Claw Hammer 13.5cm, Wood Handle – 1 Pc Chisel Wood Chisel Heavy Duty Rubber Grip Height: 5 Inch And Steel Height:4.75 Inch Material: Chromium-vanadium Steel (cr-v) Size: 50mm – 1 Pc Trowel Steel Head Wood Handle, 27cm Long – 1 Pc Level Bar Ruler Level Bar, 24 Inch Long – 1 Pc Claw Bar Heavy Duty – Steel 30 In – 1 Pc Hammer (sledge Hammer-ball Tools-heavy) – 1 Pc Gloves Safety Gloves, Cotton String Knit Orange – 1 Pc Scissor (cutting Scissor Straight Aviation Tin Snip) – 2 Pcs Customized Barbecue Grill (size: Length:36 Inches; Width:16 Inches; Height: 24 Inches – 1 Pc Glass Display Rack “estante” (2 Layers) Size: Length:36 Inches; Width: 16 Inches; Height:24 Inches) – 1 Unit Stainless Steel Utility Tong (0.6mm) – 4 Pcs Basting Brush (2” Inches, Wood Handle) – 5 Pcs Barbecue Stick – 12 Inches/100pcs/bundle – 25 Bundles Hand Gloves (plastic, Disposable, 100pcs/pack) – 6 Packs Charcoal (sack) – 4 Sacks Meat – Pork, Belly Part – 10 Kgs Hotdog (small, 1kg/pack)- 6 Packs Chicken Intestine – 6 Kgs Chicken Liver – 5 Kgs Chicken Gizzard – 5 Kgs. Chorizo (pork, 12pcs/dozen) – 20 Dozen Soy Sauce - 5 Gallon Tomato Sauce – 5 Gallon Cooking Oil – 1 Galloon Nylon-#100, 120mm, 200 Meters/kg – 3 Kgs Rubber – 3*12mm, Spearfishing Rubber Tube Latex, Elastic – 2 Pcs Mask-stainless Steel Frame, Tempered Diving Mask, Oval – 2 Pcs Kasko - Wood, Size: 14x16 – 1 Pc Plywood – Marine, Thickness: ¼, Size: 2x4 Feet – 2 Pcs Marine Epoxy – High Performance Marine Applications, 1 Quart/1liter – 2 Quarts Nails – Bronze- 1mm – 2kgs Nails – Bronze- 2mm – 2kgs Generator-2500 Watts, Rated Voltage:220v Rated Frequency: 60hz Rated Output:2.2 Kva Max Output:2.3 Kva Rated Factor: 1.0 – 1 Unit Air Compressor-compressed Medium: Air, Working Principle: Piston Compressor, Lubrication Method: Oil-free Air Compressor, Power: 980w, Size (length*width*height): 55.8*22.5*49(cm), Type: Mobile Compressor, Performance: Explosion-proof, Low Noise, High Pressure. Light Weight, Uses: Medical Compressors, Pneumatic Tools, Sandblasting, Painting, Tire Inflation, Exhaust Volume: 80l/min, Gas Tank Capacity: 30 (l), Number Of Cylinders:2 – 1 Unit Apple (medium) (88pcs./per Box) – 2 Boxes Apple (large) (88pcs/per Box) – 2 Boxes Poncan (medium) (300pcs/box) – 2 Boxes Poncan (large) (250pcs/box) – 2 Boxes Banana (lakatan) – 38 Kgs Pumpkin (unripe) – 35 Kgs Egg (large Size, 36pcs/tray) – 5 Trays Canned Goods (corned Beef, 160g/can)–5 Dozens Canned Goods (sardines In Tomato Sauce, 155g/can)–5 Dozens Sewing Machine – High Speed Electric, Power: 90w,rated Voltage: 220-230v, Number Of Stitches:34, Crochet Structure; Horizontal Type Hook, Buttonholesew: 1-step, Max Sewing Speed: 1100 Stiches/min, Needle Pitch Adjustment: 0-4mm, Needle Width Adjustment; 0-6mm, Gross Weight; About 8kg, Transfer Cloth: 7 Gears, Wide: 180mm Length: 460mm Height: 300mm, Function Introduction, 32 Kinds Of Sewing Stitches, 1 –step Lock Button Hole, 1100 Stitches Per Minute High Speed Sewing, Horizontal Type Hook, One Button Reverse Sewing, Can Sew 10 Layers, Quick Change Of Presser Foot, Automatic Winding, Fast Threading Device, Presser Foot Pressure Adjustable, Adjustable Needle Width, Adjustable Needle Pitch, Adjustable Thread Tension, Three Needle Position, Built In Led Lamp, Simple Lockrand, Quick Change Of Presser Foot, Free Arm Sleeve Sewing, Included Accessories, Metal Needle Plate – 1 Unit Plunge Router – (2200w) Variable Speed Control Has Straight Guide For Cutting Trimmer Guide Cutting Handle With Soft Grip Specifications Rated Power Input:2200w Rated Voltage: 220-240v~50/60hzno Load Speed: 14,000-20,000 Rpm Plunge Capacity: 0-60mm Diameter Of Collet: 6,8,12mm, ¼:,1/2” Inclusion:1 Pc Guide Holder1 Pc Straight Guide1 Pc Trimmer Guide1 Pc Template Guide1 Set Spanner1 Set Collet Chuck (12mm,8mm,6mm)1set Collet Chuck (1/2”,1/4”)1 Set Carbon – 1 Unit Circular Saw – Electric, Power Source:ac, Origin: Cn (origin), Saw Type: Circular Saw, Weight:3.7kg, Rated Voltage:230v, Wattage:1500w-1999w, Usage: Home Diy, No-load Speed:5000rpm, Application: Wood Saw,dimensions;30*25*23cm, Rated Input, Power: 1500w, Frequency:50hz, Max.cutting Depth:65mm, Blade Diameter:185mm, Color: Black & Blue, Rated Voltage:230-240v, Cable Length:2m, Saw Blade Type: 185*4t*16mm, Cutting Capacity Max: 90 Degrees-65mm, Cutting Capacity Min:45 Degrees-44mm - 1 Unit Jig Saw-electric, Power Source: Electricity Rated Voltage: 220v/50-60hz Rated Input Power: 600w No Load Speed: 500-3000r/min Color: Green – 1 Unit Planer – Electric, Color: Blue, Continuous Rating Input: 1000w, Power Voltage:220-240v, No Load Speed: 16000 R/min, Frequency:50-60hz, Planing Width: 82mm (3-1”/4), Planning Depth:2mm, High Power-to-weight Ratio (2.5kg/5.5lbs) For Superior Performance, Can Be Used With Both Standard Planer Blades And Doubled Edged Mini Blades, Simple Blade Setting System For Fast Blade Installation – 1unit Compressor (double Piston, ½ Hp) – 1 Pc Power (impact) Wrench – 1 Pc Drill-electric, Power:1010w, Size: Steel 16mm Wood 36mm – 1 Pc Drill-electric Drill Plate Cutter, Size:254.5x10x5cm, Weight:470g,12v-21v – 1pc Porting Tools (grinder Power Tools For Milling) – 1 Set Vat Inclusive Place Of Delivery: Brgy.poblacion, Cagdianao, Di

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Bids And Awards Committee Ooooooo ----------------------------------------------------------------------------------------------------------------------------- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Invitation To Bid Ib No. 2024-10-02 (71) Supply And Delivery Of Various Laboratory Supplies Abc: ₱ 4,590,300.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through The Fy 2024 General Appropriation Act (gaa) Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Four Million Five Hundred Ninety Thousand Three Hundred Pesos Only ( Php 4,590,300.00 ) Under The Contract For The Supply And Delivery Of Various Laboratory Supplies. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding. This Is A Partial Bid. Line Item Code Description Quantity Unit Of Measure Unit Cost Total Cost 1 Blood Auto Lancets, Sharp/sterile, 200pcs/box Comparable To Mc Lance 200 Box 1,500.00 300,000.00 2 Applicator Stick, Plain Non-sterile 6" Wood Stem, 1000 Pieces/pkg., Disposable Wooden Applicator Sticks With Uniform Cylindrical Shape And Smooth Finish 30 Box 1,000.00 30,000.00 3 Face Mask, Earloop, 3-ply, Disposable, 50pcs Per Box With Quality 12 Box 150.00 1,800.00 4 Parafilm M Roll, 4" Wide; 125 Ft/roll 3 Roll 4,000.00 12,000.00 5 Surgical Tape, 2.5cmx9.14m, 12rolls/box 10 Box 1,500.00 15,000.00 6 Rubber Tourniquet (200pcs/box) 5 Box 1,900.00 9,500.00 7 Absorbent Gauze Sponge (3"x3"-8ply 100pcs/pack), 50 Packs/box 30 Box 3,000.00 90,000.00 8 Blood Collection Tray Specifications:  Light Weight And Easy To Clean  Deep Tray Design 10 Pcs 500.00 5,000.00 9 Povidone-iodine Sterile Swabstick, 4 Inch Shaft With Soft Tipped Applicator 20000 Pcs 5.00 100,000.00 10 Yellow Tips, 18cm X 5cm X 32cm, 1000/pack 200 Packs 600.00 120,000.00 11 Povidone Iodine, 3.75l 5 Gal 500.00 2,500.00 12 Edta Evacuated Tubes (2.0 Ml) Specifications: • Sterile • At Least 18 Months Expiry From The Date Of Delivery • 100 Pcs/tray 800 Tray 1,000.00 800,000.00 13 Microtainer Edta Tubes (0.5ml) Specifications: • Sterile • At Least 18 Months Expiry From The Date Of Delivery • 100 Pcs/tray 200 Tray 1,000.00 200,000.00 14 Blue Top Coagulation Tubes (1.8 Ml) Specifications: • Sterile • At Least 18 Months Expiry From The Date Of Delivery • 100 Pcs/tray 30 Tray 1,000.00 30,000.00 15 Yellow Top Evacuated Tubes W/ Gel Separator (4.0ml) Specifications: • Sterile • At Least 18 Months Expiry From The Date Of Delivery • 100 Pcs/tray 50 Tray 1,000.00 50,000.00 16 70% Isopropyl Alcohol With Pump, 500ml 20 Bottle 150.00 3,000.00 17 Alcohol, Ethyl, 68-75%, Scented, 3.785 Liters 215 Bottle 620.00 133,300.00 18 Nitrile Examination Gloves (s), Powder Free 2500 Box 400.00 1,000,000.00 19 Nitrile Examination Gloves (m), Powder Free 2500 Box 400.00 1,000,000.00 20 Nitrile Examination Gloves (l), Powder Free 100 Box 400.00 40,000.00 21 Polyethylene Apron (50g), (heavy Duty, Nylon, Waterproof) 5 Pcs 150.00 750.00 22 Shoe Cover, Disposable (50 Pairs/pack) Specifications: • Anti-slip, Non -woven Shoe Cover, Hospital Grade 50 Packs 200.00 10,000.00 23 Sodium Hypochlorite Concentrate, 3.785 Liters Item Specifications: • With Scent • Hospital Grade And With Certificate Of Product Registration From Fda 60 Gallo 275.00 16,500.00 24 Dishwashing Liquid, Anti-bacterial, 800ml/bot Item Specifications: • Hospital Grade And With Certificate Of Product Registration From Fda • Ideal For Manual Dish Washing • Formulated To Deep Clean, Cutting Through Grease, Oil And Stubborn, Stuck- On Food Stains. • Concentrated Detergent • Contains Emollients To Prevent Hands From Becoming Dry. • Effective On Glass, Plastic Or Stainless Steel Active Reagents: Triclosan (0.10%) In Active Reagents: - Sodium Lauryl Sulfate - Sodium Laureth Sulfate - Dimethyl Amine Oxide - Sodium Dodecylbenzenesulfonate - Sodium Chloride Property: Values: Ph Value 8.7 – 9.3 Water Solubility 100% Note: Aqueous Solution Containing<=24% Alcohol And > 50% Water 300 Bottle 450.00 135,000.00 25 Liquid Hand Soap, Anti-bacterial, 500 Ml Item Specifications: • Hospital Grade And With Certificate Of Product Registration From Fda 500 Bottle 155.00 77,500.00 26 Insecticide, Aerosol Type, Net Content: 600ml Min Item Specifications: • Hospital Grade And With Certificate Of Product Registration From Fda 6 Can 600.00 3,600.00 27 Phenol Disinfectant Solution Concentrated Item Specifications: • Blue Or Magenta Color With Scent • Hospital Grade And With Certificate Of Product Registration From Fda 74 Gallon 1,000.00 74,000.00 28 Air Freshener, Aerosol Type With Disinfectant (510g), Lemon Scent Item Specifications: • Hospital Grade And With Certificate Of Product Registration From Fda 62 Can 600.00 37,200.00 29 Cleaner, Toilet And Urinal 25 Bottle 70.00 1,750.00 30 Toilet Bowl Brush With Handle 6 Pcs 150.00 900.00 31 20l Heavy Duty Commercial Mop With Mop And Squeezer Bucket 10 Kg, 49 X 39 X 34 Cm 16 Set 3,500.00 56,000.00 32 Garbage Bags Black 76cmx100cm (100pcs/pack) 100 Packs 2,000.00 200,000.00 33 Red Biohazard Bag, Small, 8 X 12 Inches, 100pcs/pack 10 Packs 3,500.00 35,000.00 Grand Total 4,590,300.00 Terms Of Reference Terms Of Delivery: One Time Delivery, 30 Calendar Days Upon Receipt Of The Notice To Proceed Terms Of Payment. Payment Shall Be Made Upon Complete Delivery. Necessary Documents Are Required In Compliance With Auditing Rules And Regulations. Post-qualification The Bidder Shall Comply The Post-qualification Requirements Set By The Procuring Entity Especially During Product Demonstration Or Requiring For A Product Sample On A Given Schedules. Failure To Comply Shall Be Ground For Post-disqualification. The Procuring Entity May Require The Bidder To Deliver A Product Sample Or Demo To Caraga Regional Hospital Vicinity, Or To Undergo A Site Visit To The Nearest Hospital. Additionally, The Procuring Entity May Have Preferences Regarding How This Hospital Can Find Reliable And Easily Accessible Procedures During The Post-qualification Phase. Consequently, During This Phase, The Bidder Must Always Be Ready To Comply With Any Requirements Or Standards Made By The Procuring Entity. This Procurement Is A Partial Bid. Validity Of The Contract Without Prejudice To The Provision Of Applicable Laws, Rules And Guidelines, The Contract Shall Be Automatically Terminated Under The Following Conditions: A. When The Total Quantity Specified In The Contract Has Been Exhausted; Or B. For Any Justifiable Reason Ground Where The Contract Will Not Redound To The Benefit Of The Government Or There Is Violation Of The Contract. Repeat Order: 1. No Repeat Order For An Item In Contract Being Awarded Shall Be Allowed Until After The Procuring Entity Has Exhausted The Estimated Quantity For The Same Item Specified Therein Or After The Contract Has Expired, Whichever Comes First, And Subject To The Conditions Provided In Section 51 Of Ra 9184 And Its Irr. For This Purpose, The Repeat Order Shall Be Availed Of Only Within Six (6) Months From The Date Of The Last Of Final Delivery Order Contract For A Specific Item Where The Estimated Quantity Has Been Exhausted, Or The Expiration Of The Contract. 2. In Case Repeat Order Is Allowed And Resorted To, The Twenty-five (25%) Maximum Allowable Quantity Shall Be Based On The Aggregate Quantity Of Actual Items Ordered And Delivered. General Conditions All Other Rules Governing Contract Implementation And Termination Under Ra 9184 And Its Irr, And Relevant Procurement Policies Shall Be Applicable. Technical Specification And Other Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3. (ra 9184) The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty Five Percent (25%) Of The Abc. Slcc Must Be Within 5 Years From The Submission Of Bids. (based On The Completion Date). Slcc Shall Be The Same Or Similar In Nature, Which Shall Be Determined By The Bac. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On September 4, 2024 – October 02, 2024 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference September 18, 2024 At 9:00 O’clock In The Morning Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/84327499756?pwd=nh2bouv79rpldzfopr8gwhkftjqlxw.1 Meeting Id: 843 2749 9756 Passcode: 609721 Deadline Of Submission Of Bids October 02, 2024 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com . Opening Of Bids October 02, 2024 Via Zoom Platform. Link: Join Zoom Meeting Https://us06web.zoom.us/j/85959073930?pwd=tkskarbglcobpcuabjtdwmythbvpry.1 Meeting Id: 859 5907 3930 Passcode: 460247 Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/1bpepddene3uohjm9dfsxltwsgvakjocj?usp=sharing Payment Of Bidding Documents Php 5,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before October 02, 2024 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On October 02, 2024 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore, Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com. 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Please Fill Up The Caraga Regional Hospital Supplier’s Registry To This Link: Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 Direct Line: (086) 826-9058 Mobile Nos. 09850508783 (smart/tnt) 09539212832 (globe/tm) E-mail Address: Crhprocurement.bac@gmail.com Approved By: Atty. Ma. Flordelin T. Ensomo, Cpa Attorney Iv Chairman, Bids And Awards Committee For And Behalf: (sgd) Cosnarie E. Seguis, Md, Fpafp Medical Specialist Iii Vice Chairman, Bids And Awards Committee

Details: Description Invitation To Bid For The Supply And Delivery Of Various Laboratory Supplies And Consumables 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2024 Intends To Apply The Sum Of One Million Three Hundred Nineteen Thousand Seven Hundred Sixty Pesos (php1,319,760.00) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Supply And Delivery Of Various Laboratory Supplies And Consumables With Project Identification Number Da-rfo-1-2024-goods-060. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Item No. Specifications Qty. Unit Unit Cost Total Cost 1 Biohazard Autoclave Gloves, Heat Resistant To 450 Deg C, 13", 1 Pair/pack 12 Pack 5,400.00 64,800.00 2 Crucible, W/ Cover, High-form Porcelain, Can Withstand Temp Up To 1150ºc, Autoclaveable, 50ml Capacity, Top Diameter = 43mm,height=58mm,12pc/pack 3 Pack 45,000.00 135,000.00 3 Face Mask, Disposable, Pp Non-woven, Earloop, Blue, 3 Ply, Dimension=17.5 Cm X 9.5 Cm, 50 Pcs/box 190 Box 150.00 28,500.00 4 Glassine Weighing Paper, Moisture Resistant, Non Absorbent, Pack Of 500 Sheets, 3"x3", Cat. No. 12578-121 3 Pack 2,500.00 7,500.00 5 Gloves, Nitrile, Medium, Powder-free, W/ Astm D6319 Compliance, 100pcs/box 10 Box 1,700.00 17,000.00 6 Gloves, Nitrile, Small, Powder-free, W/ Astm D6319 Compliance, 100pcs/box 10 Box 1,700.00 17,000.00 7 Hot Hand Rubber Mitt, Gripping Surfaces Are Studded For Positive Grip; Hole Tabs On Either End Are For Hanging. Maximum Temperature Is 500°f (260°c), 1 Pair/pack 3 Pack 3,850.00 11,550.00 8 Kjeldahl Digestion Tubes, 250ml Capacity 57 Piece 2,700.00 153,900.00 9 Laboratory Apron, Neoprene, Lightweight, Blue, Resistant To Wide Range Acids 2 Piece 4,500.00 9,000.00 10 Cartridges For 6000 Series Respirators, W/ Niosh Approval, For Use With Certain Organic Vapors/acid Gases, 2pc/pack 13 Pack 2,700.00 35,100.00 11 Buret, 25ml Capacity, Ptfe Stopcock, White Markings, 0.1ml Increment, Class A, With Stand And Clamp 1 Piece 12,000.00 12,000.00 12 Carboy W/ Spigot, Nalgene, 25l Capacity, Round, Ldpe W/ Pp Spigot And Screw Closure, Thermoplastic Elastomer Gasket, Molded-in Spigot Boss, Molded-in Graduations In 1 Gal & 5l Increments 1 Piece 7,000.00 7,000.00 13 Lab Spoon/ Spatula, 304 Ss, 5ml Spoon Capacity, Spoon End=3.8 Cm, Spatula End= 2.1cm 4 Piece 500.00 2,000.00 14 Pipette Tips, 1000 Pcs/pack, For 100-200 Μl, Sterile, Yellow, Compatible With Eppendorp/finnpipette/axypet Pipettors 14 Pack 650.00 9,100.00 15 Coverall Laboratory Suit, Abrasion Resistant, Anti-static, Biological Protection, Breathable, Chemical Resistant, Cleanroom, Dust Protection, Flex Cracking Resistance, Lightweight, Low Lint, Non-woven, Protection Against Particles And Splashes, Radioactive Particulate Protection, Silicon-free, Splash Repellent, Tear Resistant, Hooded, Unisex, Large 2 Piece 780.00 1,560.00 16 Beaker With Spout, Borosilicate Glass, With Graduation, Class A, 50ml Capacity 80 Piece 300.00 24,000.00 17 Delicate Task Wipes, 12.2x21.3cm, 1-ply 280 Counts, 280sheets/box, Extra Low Lint Wipers Made From 100% Virgin Wood Fibers, Soft, Non-abrasive, Cellulose-fiber Wipers 25 Box 360.00 9,000.00 18 Funnel, Glass, 77mm Diameter 200 Piece 633.00 126,600.00 19 Gloves, Chemical Resistant, Nitrile, For Washing Glasswares, 1pair/pack, Medium 25 Pack 250.00 6,250.00 20 Gloves, Nitrile, Large, 100pcs/box 55 Box 500.00 27,500.00 21 Graduated Cylinder, Heavy-duty, Glass, 1000ml 10 Piece 2,750.00 27,500.00 22 Lab Brushes, Cylinder, Length=13 In 25 Piece 500.00 12,500.00 23 Laboratory Gown, Polyester, 3/4 Sleeves, White, Notched Collar, Front Button Closure, With Two Patch Pockets, Vent At The Back Seam, With Print (name And Logo) 33 Piece 2,000.00 66,000.00 24 Laboratory Shoes/loafer, Durable And Lightweight, Waterproof, White 33 Pair 600.00 19,800.00 25 Laboratory Spatula, Ss, Length: 22.54 Cm, 1.13" Spoon X 1.63" Flat Blunt Ends 21 Piece 1,000.00 21,000.00 26 Para Film, 4" W X 125' L 8 Roll 3,500.00 28,000.00 27 Pipette Tips, Clear, For 10 Ml, Compatible With Vitlab Pipetor, 18 Tips/rack, Cat. No. 150394 1 Rack 2,750.00 2,750.00 28 Pipette Tips, Clear, For 10 Ml, Compatible With Vitlab Pipetor, 100 Tips/bag, Cat. No. 146494 2 Bag 4,500.00 9,000.00 29 Pipette Tips, Clear, For 5000 Μl, Compatible With Sartorius Proline Plus Pipetor, 50 Tips/rack, Cat. No. 780304 1 Rack 2,200.00 2,200.00 30 Pipette Tips, Clear, For 5000 Μl, Compatible With Sartorius Proline Plus Pipetor, 250 Tips/pack 7 Pack 1,600.00 11,200.00 31 Pipette Tips, Clear, For 5000 Μl, Compatible With Vitlab Pipetor, 28 Tips/rack, Cat. No. 150294 1 Rack 2,200.00 2,200.00 32 Pipette Tips, Clear, For 5000 Μl, Compatible With Vitlab Pipetor, 200pcs/bag, Cat. No. 146294 2 Bag 3,000.00 6,000.00 33 Pipette Tips, Clear, For 1000 Μl, Compatible With Sartorius Proline Plus Pipetor, 96 Tips/rack, Cat. No. 791000 1 Rack 2,200.00 2,200.00 34 Pipette Tips, Clear, For 1000 Μl, Compatible With Sartorius Proline Plus Pipetor,960 Tips/box, Cat. No. Lh-b791004 1 Box 4,800.00 4,800.00 35 Pipette Tips, Clear, For 1000 Μl, Compatible With Vitlab Pipetor, 96 Tips/rack, Cat. No. 150194 1 Rack 4,800.00 4,800.00 36 Pipette Tips, Clear, For 1000 Μl, Compatible With Vitlab Pipetor, 500 Tips/bag 4 Bag 650.00 2,600.00 37 Respirator, Half Facepiece, Medium, W/ Niosh Approval, For Use W/ Certain Organic Vapors/acid Gases 1pair/pack 4 Pack 3,000.00 12,000.00 38 Volumetric Flask, Borosilicate Glass, 2000ml, Class A, With Snapcap 2 Piece 3,500.00 7,000.00 39 Weighing Boat, Square, Antistatic, Polystyrene, Pack Of 250pcs, 3 X 3 Inch, 250ml Capacity 2 Pack 2,500.00 5,000.00 40 Face Mask, N95; Anti Fumes And Small Particles/microorganism Irritant 140 Piece 200.00 28,000.00 41 Funnel, Plastic, 77mm Diameter, 6 Pcs/set 9 Set 2,500.00 22,500.00 42 Gloves, Nitrile, Medium, 100pcs/pack 225 Pack 500.00 112,500.00 43 Goggles, Lens Coating, Antifog, W/ Ansi Z87.1-2010 Compliance 25 Piece 1,000.00 25,000.00 44 Interfolded Paper Towel, 175 Sheets/pack, 210mmx203mm, White 150 Pack 130.00 19,500.00 45 Laboratory Scrub Suit Unisex (customized Scrub Suit Terno , High Quality Cotton Hypoallergenic), Maroon, Various Sizes, W/ Embroidered Da Logo 14 Pair 1,500.00 21,000.00 46 Resealable Plastic Bag, 100pcs/pack, 2mil, 7"x10" 42 Pack 350.00 14,700.00 47 Resealable Plastic Bag, 100pcs/pack, 2mil, 9"x12" 38 Pack 500.00 19,000.00 48 Flask Erlenmeyer Conical, Narrow Mouth, 500 Ml, Borosilicate Glass 20 Piece 600.00 12,000.00 49 Flask Erlenmeyer Conical, Narrow Mouth, 1 Liter, Borosilicate Glass 13 Piece 900.00 11,700.00 50 Flask Erlenmeyer Conical, Narrow Mouth, 3 Liter, Borosilicate Glass 8 Piece 2,000.00 16,000.00 51 Cylinder Graduated, Single Metric Scale, W/ Pour Out, W/ Hexagonal Base, Class A, W/ Batch Certificate, 100 Ml Borosilicate Glass 10 Piece 1,695.00 16,950.00 52 Nitrile Examination Gloves ,100 Pcs/box Small( Iso Certified 9001:2015) 100 Box 500.00 50,000.00 Total 1,319,760.00 Delivery Schedule: Delivery Schedule: Sixty (60) Working Days From Receipt Of Ntp Drop-off Point: Irial Building, Brgy. Tebag East, Sta. Barbara, Pangasinan Delivery Of The Goods Is Required Within Sixty (60) Working Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From May 30, 2024 - June 5, 2024 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 6 June 2024, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 18 June 2024, 2:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 18 June 2024, 2:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Florentino A. Adame, Dvm Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Darfo1.bacsec1@gmail.com 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ May 28, 2024 Approved: Dennis I. Tactac, Abe Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2024-goods-060

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Various Diving Equipment Bid No. Agr-24-756-b (rebid) Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid 3 Section Ii. Instructions To Bidders 5 1. Scope Of Bid 5 2. Funding Information 5 3. Bidding Requirements 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders 5 6. Origin Of Goods 6 7. Subcontracts 7 8. Pre-bid Conference 7 9. Clarification And Amendment Of Bidding Documents 7 10. Documents Comprising The Bid: Eligibility And Technical Components 7 11. Documents Comprising The Bid: Financial Component 7 12. Bid Prices 8 13. Bid And Payment Currencies 8 14. Bid Security 8 15. Sealing And Marking Of Bids 9 16. Deadline For Submission Of Bids 9 17. Opening And Preliminary Examination Of Bids 9 18. Domestic Preference 9 19. Detailed Evaluation And Comparison Of Bids 9 20. Post-qualification 10 21. Signing Of The Contract 10 Section Iii. Bid Data Sheet 11 Section Iv. General Conditions Of Contract 12 1. Scope Of Contract 12 2. Advance Payment And Terms Of Payment 12 3. Performance Security 12 4. Inspection And Tests 12 5. Warranty 13 6. Liability Of The Supplier 13 Section V. Special Conditions Of Contract 14 Section Vi. Schedule Of Requirements 16 Section Vii. Technical Specifications 17 Section Viii. Checklist Of Technical And Financial Documents 19 Section I. Invitation To Bid Purchase Of Various Diving Equipment Bid No. Agr-24-756-b (rebid) 1. The Iloilo Provincial Government Through The 20% Nta Development Fund 2024 Intends To Apply The Sum Of Five Hundred Eleven Thousand Five Hundred Ninety-eight Pesos (php 511,598.00) Being The Abc To Payments Under The Contract For The Purchase Of Various Diving Equipment. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On June 25, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (php 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On July 4, 2024 At 9:00 A.m. At The N/a And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Iloilo City On Or Before July 18, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On July 18, 2024 At 9:01 A.m.at The 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Iloilo City Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com June 14, 2024 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Various Diving Equipment With Bid No. Agr-24-756-b (rebid). The Procurement Project (referred To Herein As “project”) Is Composed Of Two (2) Items, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of Five Hundred Eleven Thousand Five Hundred Ninety-eight Pesos (php 511,598.00) 2.2. The Source Of Funding Is: Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp Lloilo Provincial Capitol, Iloilo City Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To The Lloilo Provincial Capitol, Iloilo City. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Portable Scuba Breathable Air Diving Compressor With Accessories 1 1 2 Underwater Compact Camera With Waterproof Housing 1 1 ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Agr-24-756-b (rebid) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1. *portable Scuba Breathable Air Diving Compressor With Accessories Specifications: -petrol Compressor C/w Pull Start And Auto Cut Off At Low Oil Level -manual Condensation Drain -pressure Maintaining And Non Return Valve -final Safety Valve Service Pressure 232 Bar/3,364 Psi -1x Filling Hose C/w Filling Valve And Pressure Gauge -oil And Water Separators After 2nd And 3rd Stage -safety Valve After Each Stage -maxi Filter System For Filtration -filling Pressure To 200 Or 300 Bar -breathable Air Purification An Accordance To En 12021 *with 40 Cu. Ft. Tank With Thermo 200 Bar Din Valve With Insert Oxygen Cleaned *with Oxygen Regulator Set For First Aid -oxygen Regulators -oxygen Adapter Reg-tank -oxygen Non-rebreathing Mask 2. *underwater Compact Camera With Waterproof Housing Specifications: -12 Mp, 1/2.3" Bsi-cmos Sensor -25-100 Mm Equivalent F2.0-4.9 Stabilized Lens -waterproof To 15m (45 Ft), Shockproof From 2.1m (7 Ft) -crushproof To 100kgf (220 Ibf), Freezerproof To -10 Celcius Dustproof -3", 1.04 M-dot Display (non-touch) -raw Support -1 Cm (0.4") Minimum Focusing Distance -20 Fps Burst Shooting -4k/30p Video -optional Conversion Lenses And Flash Accessories Terms And Conditions 1. All Items Must Be Delivered At Lloilo Provincial Capitol, Iloilo City 2. All Items Must Be Delivered Within 30 Days Upon Receipt Of Notice To Proceed (ntp) 3. Item No. 1 Must Have Compressor Oil For Oil Change, Two Filter Cartridges And Air Filters, Specialized Tools For Compressor Maintenance. 4. All Items Must Have A Warranty And Maintenance Check For 1 Year 5. Winning Bidder Must Provide Training For Personnel As To The Operation Of The Items ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Bid Form Date: _____________________ Bid No.: ___________________ To: Bids And Awards Committee Iloilo Provincial Government Iloilo Provincial Capitol Bonifacio Drive, Iloilo City Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers __________, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To Supply/deliver/perform _________________________________________ [description Of The Goods] In Conformity With The Said Pbds For The Sum Of _______________________________________, (php _______________________) [total Bid Amount In Words And Figures] Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors, And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: Value Added Tax (vat), Income Tax, Local Taxes, And Other Fiscal Levies And Duties, As Applicable, Which Are Itemized Herein Or In The Price Schedules, If Our Bid Is Accepted, We Undertake: A. To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents (pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Period Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of ____________________________________________________ As Evidenced By The Attached [name Of The Bidder] ______________________________________. [state The Written Authority]. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signature: Duly Authorized To Sign The Bid For And Behalf Of: Date: Republic Of The Philippines) City Of ____________________) S.s. Bid Securing Declaration Bid No.: ___________________________ To: Bids And Awards Committee Iloilo Provincial Government Iloilo Provincial Capitol Bonifacio Drive, Iloilo City I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid Securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f),of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: A. Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; B. I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And C. I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. _________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of _____________________) S.s. Omnibus Sworn Statement (for Sole Proprietorship) I, _______________________________________of Legal Age, Single/married/widow, Filipino, And Residing At ________________________________________, Philippines, After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. I Am The Sole Proprietor Or Authorized Representative Of ______________________________________ With Office Address At ______________________________________; 2. As The Owner And Sole Proprietor, Or Authorized Representative Of _____________________________________, I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For ___________________________________________ [name Of The Project] Of The Iloilo Provincial Government, As Shown In The Attached Duly Notarized Special Power Of Attorney; 3. __________________________________________ Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. __________________________________________ Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. ___________________________________________ Complies With Existing Labor Laws And Standards; And 8. ___________________________________________ Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The ______________________________________. [name Of The Project] 9. _________________________________________ Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. ________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of ____________________) S.s. Omnibus Sworn Statement (for A Partnership Or Cooperative) I, _______________________________________of Legal Age, Single/married/widow, Filipino, And Residing At ________________________________________, Philippines, After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. I Am The Duly Authorized And Designated Representative Of ______________________________ With Office Address At ___________________________________; 2. I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For __________________________________ Of The Iloilo Provincial Government, As Shown [name Of The Project] In The Attached _________________________________________________; [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;] 3. _____________________________________ Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. _____________________________________ Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. None Of The Officers And Members Of _____________________________________ Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. _____________________________________ Complies With Existing Labor Laws And Standards; And 8. _____________________________________ Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The ______________________________________. [name Of The Project] 9. _____________________________________ Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. _________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of _____________________) S.s. Omnibus Sworn Statement (for A Corporation Or Joint Venture) I, _______________________________________of Legal Age, Single/married/widow, Filipino, And Residing At ________________________________________, Philippines, After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. I Am The Duly Authorized And Designated Representative Of ______________________________ With Office Address At ___________________________________; 2. I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For __________________________________ Of The Iloilo Provincial Government, As Shown [name Of The Project] In The Attached _________________________________________________; [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;] 3. _____________________________________ Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. _____________________________________ Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. None Of The Officers, Directors, And Controlling Stockholders Of _____________________________________is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. _____________________________________ Complies With Existing Labor Laws And Standards; And 8. _____________________________________ Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: E. Carefully Examining All Of The Bidding Documents; F. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; G. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And H. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The ______________________________________. [name Of The Project] 9. _____________________________________ Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. ________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of ____________________) S.s. Performance Securing Declaration Bid No: ____________________ To: Bids And Awards Committee Iloilo Provincial Government Iloilo Provincial Capitol Bonifacio Drive, Iloilo City I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, To Guarantee The Faithful Performance By The Supplier/distributor/manufacturer/contractor/consultant Of Its Obligations Under The Contract, I/we Shall Submit A Performance Securing Declaration Within A Maximum Period Of Ten (10) Calendar Days From The Receipt Of The Notice Of Award Prior To The Signing Of The Contract. 2. I/we Accept That: I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of One (1) Year For The First Offense, Or Two (2) Years For The Second Offense, Upon Receipt Of Your Blacklisting Order If I/we Have Violated My/our Obligations Under The Contract; 3. I/we Understand That This Performance Securing Declaration Shall Cease To Be Valid Upon: A. Issuance By The Procuring Entity Of The Certificate Of Final Acceptance, Subject To The Following Conditions: I. Procuring Entity Has No Claims Filed Against The Contract Awardee; Ii. It Has No Claims For Labor And Materials Filed Against The Contractor; And Iii. Other Terms Of The Contract; Or B. Replacement By The Winning Bidder Of The Submitted Psd With A Performance Security In Any Of The Prescribed Forms Under Section 39.2 Of The 2016 Revised Irr Of Ra No. 9184 As Required By The End-user. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. _________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Email Address: ______________________________________ Statement Of Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Bidder’s Name: Email Address: Bidder’s Address: Fax Number: Tel. Number: Name Of Project Amount Of Contract Date Of Contract Effectivity Owner’s Name And Address Delivery Period Date Of Delivery Date Of Acceptance Signature Over Printed Name Attachments: 1. Purchase Order (po) 2. Acceptance And Inspection Report (air) Statement Of All On-going Government And Private Contracts (including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid) Bidder’s Name: Email Address: Bidder’s Address: Fax Number: Tel. Number: Name Of Project/s Amount Of Contract Date Of Contract Effectivity Owner’s Names And Address Delivery Period (indicate All Delivery Periods If Staggered Delivery Allowed) End Of Delivery Period Value Of Outstanding Contracts (indicate If Partial Delivery Allowed) No. Of Days From End Of Delivery Period Days Of Approved Extension/ Suspension, If Any Total Value Of Outstanding Contracts (php) Signature Over Printed Name Fill Up All The Columns Accordingly Disclaimer: Non-disclosure Of All On-going Contracts And Details Thereof Is Grounds For Ineligibility And Disqualification.

Details: Description Invitation To Apply For Eligibility And To Bid 1. The Cebu South Medical Center Bids And Awards Committee Invites Suppliers To Apply For Eligibility And To Bid For The Following Projects: Bac No. Epa-2025-007 Supply And Delivery Of Various Medical Supplies Item No. Qty Unit Descriptions Source Of Fund Unit Abc Total Abc Bid Docs Price Project I Procurement Of Various Operating Kits (award Per Item) Nep 2,341,000.00 2,500.00 1 200 Kits Appendectomy Kit 3,000.00 600,000.00 2 300 Kits Cesarean Kit 3,000.00 900,000.00 3 50 Kits Hernia Kit 9,920.00 496,000.00 4 50 Kits Open Cholecystectomy Kit 3,000.00 150,000.00 5 50 Kits Tahbso Kit 3,900.00 195,000.00 Project Ii Procurement Of Various Hospital Gloves (award Per Item) Nep 6,976,550.00 7,000.00 1 3000 Pairs Sterile Gloves 6.0 Powder Free, Thick, Internal Surface: Polyacrylate Coated, High Tear Resistance, Suitable For Surgery And Infection Control, Strong Gloves With Excellent Tactile Sensitivity, Roughened Surface For Optimal Sensitivity, Packed In Easy To Peel Plastic, Covered With Inner Packaging With Proper Labelling 90.00 270,000.00 2 15000 Pairs Sterile Gloves 6.5 Powder Free, Thick, Internal Surface: Polyacrylate Coated, High Tear Resistance, Suitable For Surgery And Infection Control, Strong Gloves With Excellent Tactile Sensitivity, Roughened Surface For Optimal Sensitivity, Packed In Easy To Peel Plastic, Covered With Inner Packaging With Proper Labelling 90.00 1,350,000.00 3 18000 Pairs Sterile Gloves 7.0 Powder Free, Thick, Internal Surface: Polyacrylate Coated, High Tear Resistance, Suitable For Surgery And Infection Control, Strong Gloves With Excellent Tactile Sensitivity, Roughened Surface For Optimal Sensitivity, Packed In Easy To Peel Plastic, Covered With Inner Packaging With Proper Labelling 90.00 1,620,000.00 4 16000 Pairs Sterile Gloves 7.5 Powder Free, Thick, Internal Surface: Polyacrylate Coated, High Tear Resistance, Suitable For Surgery And Infection Control, Strong Gloves With Excellent Tactile Sensitivity, Roughened Surface For Optimal Sensitivity, Packed In Easy To Peel Plastic, Covered With Inner Packaging With Proper Labelling 90.00 1,440,000.00 5 5000 Boxes Clean Gloves, Blue Color, Thick, Nitrile, Powder Free (large), 50 Pairs/bx 230.00 1,150,000.00 6 4985 Boxes Clean Gloves, Blue Color, Thick, Nitrile, Powder Free (medium), 50 Pairs/bx 230.00 1,146,550.00 Project Iii Procurement Of Various Disposable Syringes And Needles (award Per Item) Nep 8,549,620.00 9,000.00 1 4000 Pcs 10ml Prefilled Preservative Free Normal Saline Syringe, With Standard 10ml Barrel Size Syringe, With 0.9 Sodium Chloride, With Serrated Thumb Press And Plunger Retainer/retention Ring, With Triple Layer Pointed Rubber Plunger Stopper. Promoting Zero Dead Space And Total Utilization Of Fluids 64.00 256,000.00 2 3000 Pcs 3ml Prefilled Preservative Free Normal Saline Syringe, With Standard 10ml Barrel Size Syringe, With 0.9 Sodium Chloride, With Serrated Thumb Press And Plunger Retainer/retention Ring, With Triple Layer Pointed Rubber Plunger Stopper. Promoting Zero Dead Space And Total Utilization Of Fluids 52.00 156,000.00 3 2000 Pcs 5ml Prefilled Preservative Free Normal Saline Syringe, With Standard 10ml Barrel Size Syringe, With 0.9 Sodium Chloride, With Serrated Thumb Press And Plunger Retainer/retention Ring, With Triple Layer Pointed Rubber Plunger Stopper. Promoting Zero Dead Space And Total Utilization Of Fluids 58.00 116,000.00 4 830 Pcs Asepto Syringe, Sterile, Soft, Easy To Grip,latex Free 50ml-60ml Syringe Paliable Bulb For Suction 49.00 40,670.00 5 300 Boxes Disposable Syringe 20 Cc W/o Needle, Eo Sterilized Pyrogenic Free, Non-toxic, Single Use 50's/box 520.00 156,000.00 6 2000 Pcs Disposable Syringe 50 Cc W/o Needle, Eo Sterilized Pyrogenic Free, Non-toxic, Single Use 20.00 40,000.00 7 500 Boxes Insulin Syringe Ultrafine 6mm Needle Length Gauge 31 Blister Pack 1 Ml/100 Units, Calibrated 100s/box 1,130.00 565,000.00 8 1500 Boxes Syringe,1 Ml Luer Lock Tip With Ultra Sharp Needles -plastic Sterile ,with Clear Barrel,bold Precise Scale Markings,smooth Plunger Action,tamper Evident Peel Individually Packed ,disposables,100's) 1,010.00 1,515,000.00 9 1800 Boxes Syringe,10 Ml Luer Lock Tip With Ultra Sharp Needles -plastic Sterile ,with Clear Barrel,bold Precise Scale Markings,smooth Plunger Action,tamper Evident Peel Individually Packed ,disposables,100's 1,250.00 2,250,000.00 10 2500 Boxes Syringe,3 Ml Luer Lock Tip With Ultra Sharp Needles -plastic Sterile ,with Clear Barrel,bold Precise Scale Markings,smooth Plunger Action,tamper Evident Peel Individually Packed ,disposables,100's 942.00 2,355,000.00 11 800 Boxes Syringe,5ml Luer Lock Tip With Ultra Sharp Needles -plastic Sterile ,with Clear Barrel,bold Precise Scale Markings,smooth Plunger Action,tamper Evident Peel Individually Packed ,disposables,100's 1,014.00 811,200.00 12 400 Boxes Disposable Needle G.18x1 1/2",precision Glide Needle , Regular Wall Stainless Still Needle With Polyprophylene Hub, (100's/box) 450.00 180,000.00 13 50 Boxes Disposable Needle G.19x1 1/2",precision Glide Needle , Regular Wall Stainless Still Needle With Polyprophylene Hub, (100's/box) 320.00 16,000.00 14 50 Boxes Disposable Needle G.20x1 1/2",precision Glide Needle , Regular Wall Stainless Still Needle With Polyprophylene Hub, (100's/box) 265.00 13,250.00 15 50 Boxes Disposable Needle G.21x1 1/2",precision Glide Needle , Regular Wall Stainless Still Needle With Polyprophylene Hub, (100's/box) 265.00 13,250.00 16 50 Boxes Disposable Needle G.22x1",non-toxic,non-pyrogenic,disposable,hypodermic Needle, 100's/bx 265.00 13,250.00 17 50 Boxes Disposable Needle G.23x1',precision Glide Needle , Regular Wall Stainless Still Needle With Polyprophylene Hub, (100's/box) 265.00 13,250.00 18 50 Boxes Disposable Needle G.25x1",precision Glide Needle , Regular Wall Stainless Still Needle With Polyprophylene Hub, (100's/box) 265.00 13,250.00 19 100 Boxes Disposable Needle G.26x1/2',non-toxic,non-pyrogenic Hypodermic Needle, (100's/box) 265.00 26,500.00 Project Iv Procurement Of Various Intravenous Infusion Cannula And Infusion Sets (award Per Item) Nep 8,470,000.00 9,000.00 1 5000 Pcs Sterile Intravenous Kit, Pack Are Sterilized As A Whole In Pouch. Pouch Measurement Should Be Ranges 10x3 Cm To 15x5 Cm, For Storage Purposes, Kit Includes The Following: 1 Pc 70% Isoprophyl Alcohol Swab 1pc 10% Povidone Iodine Swabstick With 70% Ethyl Alcohol 1 Pc Latex Free Flat Blue Tourniquet 1 Pc Sterile Transparent Dressing 1 Pc Iv Site Label 1 Roll Easy To Tear Hypoallergenic Plaster 2 Pcs 2x2 Sterile Gauze 170.00 850,000.00 2 10000 Pcs Vented Macro-infusion Set, With Anti Run Dry Technology And Auto Prime Mechanism, With Needle Free System Y-site Access Port, With Pinch Clamp, With Hydrophobic Filter 1.2 Um, 180 - 185 Cm Tube Lengh, 19 – 21 Ml Priming Volume. 165.00 1,650,000.00 3 3000 Pcs Infusion Administration Set, Microset With Luer Lock Tip, Y-port Options With Or Without Needle, With Airvent, Sharp And Easy Piercing Air Vented Spike, Bacteria Retentive Air Inlet With Snap On Cap, Transparent Drip Chamber, Approx 60 Drops/ml, Standard Tube Length: 150 Cms, Tube Dia: I O 3.0mm, O O 4.1mm Sterilized Eo Gas, Non-toxic, Non-pyrogenic With Needle, Preferably With Finger Shield. 25.00 75,000.00 4 10000 Pcs Iv Infusion Set With Burette , Large Calibrated Burette Chamber 150 Cc, With Accurate Graduated Markings To Allow Clear View Of The Content, With Supplementary Injection Port For Mixing And Incorporating Of Iv Medications, With Saftey Air Shut Float Valve Minimizes Air Entering The Fluid Line And Allows Highly Visible Contrast Level Indicator, Transparent, Kink-resistant Tubing Provides Clear View Of Blockage Or Backflow Of Blood, Approximately 60 Drops/ml. Single Use, Eo Sterilized, Pyrogen Free, Blue Colored Roller-type Flow Controller 92.00 920,000.00 5 3000 Pcs Bloodset Admisnistration Set With Leur Lock, Disposable,1.5”, 18g Hypodermic Needle For Smooth And Effortless Vein Puncture, Flow Regulator With A Good Grip Roller Clamp, 54.2 Mm Spike, Big Double Chamber Of 140 Mm Size Of Polypropylene Material, 170 – 210 Microns Filter, Drip Chamber Ensures Exact 15 Drops/ml. 90.00 270,000.00 6 10000 Kit Iv Catheter G18 With Injection Port And Valve, Back Cut Needle Bevel And Tapered End, Must Be Made Of Polyurethane Biomaterial Which Is Kink Resistance And Radiopaque Stripes, With Dwell Time Of At Least 1.20 Days, With Wings, With Emergency Access Port And Snap Cap And Passive Safety Needle Shield. Luer Lock Compatible,needle Size 1.3x32 Mm, Flow Rate 103ml/min 150.00 1,500,000.00 7 3000 Pcs Iv Catheter G20 With Injection Port And Valve, Back Cut Needle Bevel And Tapered End,must Be Made Of Polyurethane Biomaterial Which Is Kink Resistance And Radiopaque Stripes, With Dwell Time Of At Least 1.20 Days, With Wings, With Emergency Access Port And Snap Cap And Passive Safety Needle Shield. Luer Lock Compatible, Needle Size 0.9x25 Mm , Flow Rate 42ml/ Min 150.00 450,000.00 8 5000 Pcs Iv Catheter G22 With Injection Port And Valve, Back Cut Needle Bevel And Tapered End,must Be Made Of Polyurethane Biomaterial Which Is Kink Resistance And Radiopaque Stripes, With Dwell Time Of At Least 1.20 Days, With Wings, With Emergency Access Port And Snap Cap And Passive Safety Needle Shield. Luer Lock Compatible, Needle Size 0.9x25 Mm , Flow Rate 42ml/ Min 150.00 750,000.00 9 100 Pcs Iv Flow Regulator Extension Set, Non-toxic, Non-pyrogenic, Sterile, Single Use. 250.00 25,000.00 10 6000 Pcs Straight Iv Cannula For Pediatric G24, Hub Color Purple, Non- Traumatic Needle, Initial Back Flow Is Visible On The Cannula Upon Insertion , Must Be Made Of Polyurethane Biomaterial Which Is Kink Resistance, With Dwell Time Of At Least 1.20 Days, With Wings, Needle Size 0.7x 19mm, Flow Rate 19ml/min, Dehp, Latex And Pvc Free. Sterilized Using E.o, 165.00 990,000.00 11 6000 Pcs Straight Iv Cannula For Pediatric G26, Hub Color Purple, Non- Traumatic Needle, Initial Back Flow Is Visible On The Cannula Upon Insertion , Must Be Made Of Polyurethane Biomaterial Which Is Kink Resistance, With Dwell Time Of At Least 1.20 Days, With Wings, Needle Size 0.6x 19mm, Flow Rate 14ml/min, Dehp, Latex And Pvc Free. Sterilized Using E.o, 165.00 990,000.00 Project V Procurement Of Various Medical Disinfectants (award Per Item) Nep 2,148,200.00 2,500.00 1 800 Boxes Alcohol Swab 2x2 Sterile Gauze With 70% Isoprophyl Alcohol, Single Layer Thick 2cm – 4cm Wrapper Diameter Provide Air Tight Seal, Prevent Leakage And Drying Out 100's/box 240.00 192,000.00 2 300 Bots Antiseptic Wash Cleanser 4% Chlorhexidine Digluconate, 1 Liter 1,200.00 360,000.00 3 50 Gals Disinfectant. Activated Glutaraldehyde (ortho-phthalaldehyde Solution) High Level Disinfectant Gallon , Easy To Use With Low Odor And Requires No Activation Or Mixing, 3.78liters/gallon 2,250.00 112,500.00 4 20 Bots Disinfectant. Active Ingredients: 20 G Cocopropylendiamine Per 100 G Solution. Active Against Bacteria, Mycobacteria (m. Terrae), Levurocidal, Enveloped And Non-enveloped Viruses (hbv / Hcv / Hiv, Adeno-, Polyomavirus) 1000ml 6,600.00 132,000.00 5 50 Bots Disinfectant. Alcohol Based Hand Disinfectant With 45 G Ethanol (100%), 18g N-propanol, Excipients: Purified Water, Diisopropyl Adipate, Peg-6 Caprylic/ Capric Glycerides, Dexpanthenol, Bisabolol, Perfume, Allantoin With Free 2 Pcs Dispenser 1,320.00 66,000.00 6 1200 Bots Disinfectant. Anti - Bacterial Liquid Hand Soap, Kills 99.9% Germs And Bacteria, Ph Balanced Formulation, Enriched With Added Moisturizers,sodium Laureth Sulfate, Water Cocamidopropyl Betaine ,glycerin,citric Acid Calcium Chloride,fragrance/parfum Acrylates/peg-10 Maleate/styrene Copolymer Salicylic Acid,whey Protein,tetrasodium Edta ,sodium,hydroxide,methylchloroisothiazolinone,potassium Sorbate,methylisothiazolinone Sodium Benzoate 225 Ml - 500 Ml 136.00 163,200.00 7 80 Jars Disinfectant. Effervescent Surface Disinfectant Tablet W/ 50% Troclesene 2.5 - 5g X 100's/jar 2,000.00 160,000.00 8 30 Gals Disinfectant. Enzymatic Detergent With Protease, Low-foaming Solution, Neutral Ph, Biodegradable, Dilution Rate Of 8- 16ml/1l H2o, Fast Immersion Time At 1-3 Minute Rapid Cleaning Action, Compatible To Use With Manual Or Automated Washer 5 Liters/gal 3,700.00 111,000.00 9 200 Packs Disinfectant. Meliseptol Wipes Disinfection Propanol-1-ol Alcohol-based 17.0 G, Didecyldimethylammonium Chloride 0.23g With Excipients Of Surfactants, Purified Water Compound Active Against Bacteria, Mycobacteria, Fungi, Viruses. Aldehyde And Alkylamin -free, 100-200 Sheets/pack 1,000.00 200,000.00 10 50 Gals Disinfectant. Povidone Iodine 7.5% Cleanser 3.785 - 4.0 Liters 1,300.00 65,000.00 11 80 Gals Disinfectant. Povidone Iodine, 10% Solution, Anti Septic/disinfectant, Gallon 3.785 - 4.0 Liters 1,300.00 104,000.00 12 100 Pcss Disinfectant. Surgical Hand Cleaning Brush - 10% Povidone Iodine Disinfection Brush, Sterile; Made Of Medical Grade Polyethylene And Sponge, With Or Without Nail Pick 180.00 18,000.00 13 50 Bots Disinfectant. Wound Irrigation Sol'n 370ml, Composition: Purified Water, Betaine Surfactant, 0.1% Polyaminopropyl Biguanide (polyhexanide) 910.00 45,500.00 14 473 Gals Ethyl Alcohol 70% Solution, 3.78 Liters In Gallon. Each Gallon Must Contain Ethyl Acohol, Water, Propylene Glycol, Fragrance And With Moisturizer 500.00 236,500.00 15 100 Bottles Isopropanolol N-propanolol Mecetronium Ethylsulfate; 1l Per Bottle 1,450.00 145,000.00 16 50 Pcs Skin Disinfectant For Invasive Medical Procedure, Quick Drying, With Chlorhexidine Gluconate And 0.7 Isoprophyl Alcohol With Purified Water, Glucono-lactone And Sodium Hydroxide, Spray, 250ml 750.00 37,500.00 Project Vi Procurement Of Various Medical Supplies For Surgical Complex (award Per Item) Nep 3,639,800.00 5,000.00 1 100 Pcs Autoclave Tape 1/2" - 1"x60 Yds For Steam 500.00 50,000.00 2 300 Pack Disposable Bonnet/bouffant Cap/ Head Cap, Preferably Blue/green 100's/pack 150.00 45,000.00 3 50 Pcs Disposable Cautery Pad, Cable Length 3 Meters. 280.00 14,000.00 4 300 Sets Eo Plastic Gas Cartridges 11g. Set Includes Liner Bag+humidity Chip+dosimeter, Cable Tie. Comaptible With Axis Ax 160 Eo Gas Sterilizer 1,800.00 540,000.00 5 50 Sets Epidural Set Continous Epidural Anesthesia, Tuohy Bevel, 1cm Length Marking, Diameter 1.30x80mm, G.18 Or Diameter 1.70 X 80 Mm, 16 G, Standard, Soft-tip. Length 1000 Mm Threading Assist Guide. Catheter Connector, Pidural-flat-filter, 0.2 Μm Filling Volume 0.45 Ml Pressure Resistant Up To 7 Bar. Filter Fixation Device 0.2 Μm Filters, Self-adhesive, With Luer Lock Syringe. With Hypodermic Needles: Orange, Diameter 0.5 X 16 Mm, 25 G Green, Diameter 0.8 X 40 Mm, 21 G Pink, Diameter 1.2 X 40 Mm, 18 G 1,400.00 70,000.00 6 5 Sets Continuous Epidural Set 20 Ga. X 2 In. (50mm) Tuohy Needle Set With 24 Ga. Closed Tip Pediatric Catheter 2,400.00 12,000.00 7 10 Pcs Gastrostomy Feeding Tube – 24 Fr , Medical Grade Silicone Construction, Inflatable Silicone Internal Retention Balloon, Secure Lock External Retention Ring, Tapered Or Non-tapered Distal Tip, Radiopaque Stripe, Balloon Volume (ml) 7-10, 7,500.00 75,000.00 8 20 Pcs Hemodialysis Catheter Triple Lumen Fr. 12 X 15 Cm Curved, 1 Pc Guidewire Advancer: 0.035" X 60cm, 1 Pc Introducer Needle: G.18 X 65mm, 1 Pc Vessel Dilator: Fr. 12 X 15cm, 1 Pc. 5cc Blue Syringe, Injection Adaptors 4,600.00 92,000.00 9 5 Pcs Hemodialysis Catheter Triple Lumen Fr. 22 X 15 Cm Curved, 1 Pc Guidewire Advancer: 0.035" X 60cm, 1 Pc Introducer Needle: G.18 X 65mm, 1 Pc Vessel Dilator: Fr. 12 X 15cm, 1 Pc. 5cc Blue Syringe, Injection Adaptors 4,600.00 23,000.00 10 10 Kits Nephrostomy Catheter Kit With Safety String Lock, Fr. 10, 30cm, With Metal Stiffing Cannula, Flexible Stiffininf Cannula, Introducer Needle G. 18, 20cm, Guide Wire, Dilators 8,10,12,14,16, 18, Connecting Tube, Catheter Retention Disk Scalpel And Stop Cock 14,000.00 140,000.00 11 30 Pcs Neurosurgery, Hemostat, Absorbable,antibacterial, With Pure Oxidizedregenerated Cellulose Technology,size 2 X 4 Inch, Sterile, Cotton Type. 5,370.00 161,100.00 12 30 Pcs Neurosurgery, Hemostat, Absorbable, Antibacterial, With Pure Oxidized Regenerated Cellulose Technology, Structured Non-woven Material, Size 1x2 Inch, Sterile 1,950.00 58,500.00 13 150 Boxes Spinal Needle G25 X3"1/2 With Quincke Type Needle Provide A Sharper Bevel 0.53x88mm 25's/box 2,500.00 375,000.00 14 6 Boxes Spinal Needle G26 X3"1/2 With Quincke Type Needle Provide A Sharper Bevel 0.53x88mm 25's/box 2,500.00 15,000.00 15 20 Boxes Sterile Reinforced Adhesive Skin Closure 1/8x4' (sterile Strip) (50's/box) 1,800.00 36,000.00 16 8 Rolls Sterilization Pouch With Autoclave & Gas Indicator 10 Inch 3,400.00 27,200.00 17 8 Rolls Sterilization Pouch With Autoclave & Gas Indicator 12 Inx200m, Gusseted 3,000.00 24,000.00 18 10 Rolls Sterilization Pouch With Autoclave & Gas Indicator 2 Inch 5,500.00 55,000.00 19 10 Rolls Sterilization Pouch With Autoclave & Gas Indicator 4 Inx200m, Gusseted 3,000.00 30,000.00 20 10 Rolls Sterilization Pouch With Autoclave & Gas Indicator 6 Inx201m, Gusseted 3,000.00 30,000.00 21 8 Pcs Ventriculoperitoneal Shunt Kit Medium Pressure Burr Hole Design -1pc. 16mm Csf Flow Control Valve -1pc. 18cm Ventricular Catheter With Stylet -1pc. 120cm Open Ended Peritoneal Catheter -medium Pressure 51-110mm H2o Closing Pressure -sterile 35,000.00 280,000.00 22 8 Pcs Ventriculoperitoneal Shunt Kit Medium Pressure Burr Hole Design-1pc. 12mm Csf Flow Control Valve -1pc. 23cm Ventricular Catheter With Stylet -1pc. 90cm Open Ended Peritoneal Catheter Kink Resistant -sterile 35,000.00 280,000.00 23 10 Pcs Tracheal Tube Introducer (bougie) Fr.10 -length 70cm, Made Of Medical Grade Pe, Flexible, With Graduated Marking, Rounded Smooth Curved Tip, Sterile 1,200.00 12,000.00 24 10 Pcs Tracheal Tube Introducer (bougie) Fr.6 -length 53.5cm, Made Of Medical Grade Pe, Flexible, With Graduated Marking, Rounded Smooth Curved Tip, Sterile 1,200.00 12,000.00 25 10 Pcs Tracheal Tube Introducer (bougie) Fr.15 -length 70cm, Made Of Medical Grade Pe, Flexible, With Graduated Marking, Rounded Smooth Curved Tip, Sterile 1,200.00 12,000.00 26 30 Pcs Single Shot Dual Guidance Stimulating Needle - With 360 Degreeechogenic X-pattern,safety Code For Identification Of The Needle And Needle Tip Position, Insulated Echogenic Full Tip Needle 20gx100mm, And 30 Degree Bevel Design, Sterile, Disposable 1,800.00 54,000.00 27 30 Pcs Single Shot Dual Guidance Stimulating Needle - With 360 Degreeechogenic X-pattern,safety Code For Identification Of The Needle And Needle Tip Position, Insulated Echogenic Full Tip Needle 20gx50mm, And 30 Degree Bevel Design, Sterile, Disposable 1,800.00 54,000.00 28 1300 Pcs Suction Poole Drain, Connecting Tube, With Handle 300.00 390,000.00 29 500 Packs Surgical Gauze 2x2 24 X 28 Mesh, Unsterile, 100's/pack 60.00 30,000.00 30 500 Packs Surgical Gauze 4x4 24 X 28 Mesh, Unsterile, 100's/pack 180.00 90,000.00 31 500 Packs Surgical Gauze 4x4 With X-ray Detectable Thread Sterile 10's Pack 50.00 25,000.00 32 500 Packs Surgical Gauze 4x8x8 Ply 28x24 Mesh With X-ray Detectable Thread, Made From 100% Pure Surgical Grade Cotton Gauze, Soft And High In Absorbency, Folded Edges And Lint Free Sterile 10's Pack 100.00 50,000.00 33 300 Pcs Surgical Gauze Laparotomy Sponge 18"x18" , 24x28 Mesh With X-ray Detectable Thread, 1 Pc/pack 170.00 51,000.00 34 15000 Packs Surgical Gauze Pad 4x4 X 8 Ply, 24x28 Mesh (5 Pcs Per Pack), Sterile 25.00 375,000.00 35 40 Rolls Surgical Gauze Roll 36"x 100 Yards 28x24 Mesh 1,300.00 52,000.00 Project Vii Procurement Of Various Medical Surgical Sutures (award Per Item) Nep 2,140,302.00 2,500.00 1 3 Boxes Suture, 4/0, Round Needle, Absorbable Braided Polyglactin Antibacterial 4-0, 60-80cm, 20mm 1/2c, Taper, 12's/box 5,334.00 16,002.00 2 1 Boxes Suture, 4/0, Round Needle, Non-absorbable Blue Monofilament Polypropelene 4-0 (1.5 Metric), 60-90cm, 17mm 1/2c Taper, Double Arm, 36's/box 32,000.00 32,000.00 3 2 Boxes Suture, 5/0, Cutting Needle, Non-absorbable Blue Monofilament Polyprolelene 5-0 (1.0 Metric), 60-90cm, 13mm 3/8c, Double Arm, 36's/box 28,000.00 56,000.00 4 2 Boxes Suture, 5/0, Round Needle, Non-absorbable Blue Monofilament Polypropelene, 5-0 (1.5 Metric), 60-90cm, 17mm 1/2c Taper, Double Arm, 36's/box 30,000.00 60,000.00 5 3 Boxes Suture, 5-0, Midterm Absorbable, Synthetic, Violet Coated, Braided, Polyglactin 910 With Antibacterial Property, 1.0 Metric, 70cm, 17mm Rb-1 Plus 1/2c Taper, 12's/box 9,200.00 27,600.00 6 2 Boxes Suture, Mid-term Braided Absorbable Polyglactin 910 (poly(glycolide-co-l-lactid 90/10) Suture Size 6-0 3/8 Round Needle, 45cm, Sterile 9,500.00 19,000.00 7 2 Boxes Suture, 6/0, Round Needle, Non-absorbable Blue Monofilament Polypropelene 6-0 (1.7 Metric), 60-90cm, 10mm 1/2c Taper, Double Arm, 36's/box 28,500.00 57,000.00 8 100 Pcs Suture, 3/0, Round Needle-absorbable Monofilament Catgut Suture 3-0, 60-80cm, 26mm 1/2 C, Taper, 12's/box 200.00 20,000.00 9 50 Pcs Suture, Monofilament Polyamide Sutures 2/0, 3/8 Circle Reverse Cutting / Cutting 16mm Needle,70cm - 75 Cm, Non-absorbable, Cutting Needle 200.00 10,000.00 10 800 Pcs Suture, Monofilament Polyamide Sutures 3/0,3/8 Circle Reverse Cutting / Cutting 16mm Needle,70cm - 75 Cm, Non-absorbable, Cutting Needle 200.00 160,000.00 11 200 Pcs Suture, Monofilament Polyamide Sutures 4/0, 3/8 Circle Reverse Cutting/cutting 16mm Needle, 70cm, Non-absorbable, Cutting Needle Ben Sutures/benlon 200.00 40,000.00 12 100 Pcs Suture, Monofilament Polyamide Sutures 5/0,3/8 Circle Reverse Cutting / Cutting 16mm Needle,70cm - 75 Cm, Non-absorbable, Cutting Needle 200.00 20,000.00 13 300 Pcs Suture, Polyglactin Braided Coated Absorbable Suture-3/0, 70-75cm, Undyed Round 17mm 1/2c Needle 630.00 189,000.00 14 300 Pcs Suture, Polyglactin Braided Coated Absorbable Suture-4/0, Round 22mm 1/2c Needle , 70-75cm, Undyed, Antibacterial, Sterile 460.00 138,000.00 15 800 Pcs Suture, Polyglactine Undyed, Braided Coated Absorbable Suture-2/0, 90cm, Taper, 35-37mm 1/2c Needle 300.00 240,000.00 16 200 Pcs Suture, 2-0 Polyglactine 910 Undyed, Absorbable Braided Suture 2/0, 90-100cm, Taper, 26-28 Mm 1/2c Needle 300.00 60,000.00 17 120 Pcs Suture, Polyglactine Braided Coated Absorbable Suture-1/0, 90cm, Taper 38mm - 40mm Needle 300.00 36,000.00 18 250 Pcs Suture, Polyglactine Braided Coated Absorbable Suture-4/0, 75cm, Cutting 26mm 3/8c Needle 300.00 75,000.00 19 200 Pcs Suture, Polypropylene 0 Round Needle, 1/2 Circle 37-40mm, 70-90cm 300.00 60,000.00 20 200 Pcs Suture, Polypropylene 2/0 Round Needle, 1/2 Circle 20-26mm, 70-90cm 300.00 60,000.00 21 200 Pcs Suture, Polypropylene 3/0 Round Needle, 1/2 Circle 20-26mm, 70-90cm 300.00 60,000.00 22 200 Pcs Suture, Polypropylene 5/0 Round Needle, 1/2 Circle 17-19mm, 70-90cm 300.00 60,000.00 23 10 Pcs Macroporous, Soft And Strong Mesh For Inguinal And Ventral Hernia Repair,non Absorbable Polypropelene, Knitted Monofilament Material, 15x15cm Dimension, Pore Size 1.5 Mm, Weight 60 G/m², With Blue Reinforced Guiding Lines That Provide Easy Deployment 5,650.00 56,500.00 24 100 Pcs Suture, Silk Braided 0, Cutting 40mm Needle, Non Absorbable Suture, 90cm 250.00 25,000.00 25 300 Pcs Suture Silk, Braided , Coated, Non Absorbable 2/0 Strands 15 X 60 Cm, Sterile 250.00 75,000.00 26 300 Pcs Suture, Silk 4/0, Cutting 22-26mm Needle, Non Absorbable 70-90 Cm 250.00 75,000.00 27 200 Pcs Suture, Silk Braided 4/0, Round 20-22mm, Non Absorbable Suture, 75cm 250.00 50,000.00 28 120 Pcs Suture Silk, Braided , Coated, Non Absorbable 0 Strands 15 X 60 Cm 250.00 30,000.00 29 120 Pcs Suture Silk 1/0, Cutting 40mm Needle, Non Absorbable Suture, 90cm 250.00 30,000.00 30 120 Boxes Suture,4/0, Round Needle-absorbable Monofilament Catgut Suture 4-0, 60-80cm, 26mm 1/2c, Taper, 12's/box Surgitech/ Tudor 250.00 30,000.00 31 4 Boxes Suture,6/0, Round Needle-absorbable Monofilament Poliglecaprone 6-0, 45cm, 11mm 3/8c Reverse Cutting Needle, 12's/ Box 17,000.00 68,000.00 32 100 Pcs Suture,monofilament Polyamide 2/0 Cutting, 19mm Non Absorbable 75cm 250.00 25,000.00 33 100 Pcs Suture,monofilament Polypropylene 1/0, Round Needle, 3/8 Circle 19mm 250.00 25,000.00 34 80 Pcs Suture, Silk Braided 2/0, Cutting Needle 19-22mm, Non Absorbable Suture, 70-75cm 250.00 20,000.00 35 80 Pcs Suture Silk, Braided , Coated, Non Absorbable 3/0 Strands 15 X 60 Cm, Sterile 250.00 20,000.00 36 300 Pcs Suture, Silk Braided 2/0, Round 19-22mm, Non Absorbable Suture, 70-75cm 250.00 75,000.00 37 60 Pcs Suture. Multifilament/braided Absorbable 4/0 Round Needle 20mm 1/2c, 75cm 340.00 20,400.00 38 60 Pcs Suture. Multifilament/braided Absorbable 3/0 Round Needle 26mm, 75cm 330.00 19,800.00 Project Viii Procurement Of Glucose Strips (award Per Item) Nep 5,049,000.00 5,000.00 1 990 Boxes Glucose Strips Can Measures, Autocorrects And Eliminates Clinical Interferences Like Ascorbic Acid, Hematocrit, Acetaminophen/paracetamol, Uric Acid, Biliburin, Maltose Galactose Etc) For Arterial/venous/capillary/neonatal, Measurement Range 10-600mg/dl, Measurement Unit In Mg/dl, 1.2ul Blood Sample, 6 Seconds Time Result, Gold End Layer Noble Metal For Electrochemical Stability, Blue Top Layer With Vent Hole For Fast Sample Draw, Active Ingredients: Glucose Dehydrogenase And Glucose Oxidase, 2 Canisters Of 50’s In A Box With Free 100 Pcs Retractable Single Use Lancet G30 With Fixed Needle Depth 1.5 - 1.8mm Suitable For Neonates Pedia Adult With Free Use Of Glucometers, Meter With Memory Storage Of 500 Tests No Calibration Codes Needed, Meter Designed With Strip Ejector. 1 Glucometer In Every 10 Boxes Of Glucose Strips With Auto- Calibration And With Available Calibration Certificate. Supplier Must Change The Defective Meter As Reported By The End User Free Of Charge. Supplier Must Conduct Calibration Check Up Or Preventive Maintenance As Per End User Request On Its Chosen Schedule. 5,100.00 5,049,000.00 Project Ix Procurement Of Various Medical Supplies (award Per Item) Nep 7,015,320.00 7,000.00 1 30 Pcs Bag Valve With Oxygen Tubing, Reservoir Bag And Pressure Limiting Valve (adult) All Parts Should Be Airtight Sealed Plastic And Sterile. 900.00 27,000.00 2 50 Pcs Bag Valve With Oxygen Tubing, Reservoir Bag And Pressure Limiting Valve (pedia) All Parts Should Be Airtight Sealed Plastic And Sterile. 900.00 45,000.00 3 50 Pcs Bag Valve With Oxygen Tubing, Reservoir Bag And Pressure Limiting Valve (neonate) All Parts Should Be Airtight Sealed Plastic And Sterile. 900.00 45,000.00 4 200 Pcs Endotracheal Tube Id 2.0mm,uncuffed, Sterile, Single Use 40.00 8,000.00 5 300 Pcs Endotracheal Tube Id 2.5mm,uncuffed, Sterile, Single Use 40.00 12,000.00 6 300 Pcs Endotracheal Tube Id 3.0mm, Uncuffed, Sterile, Single Use 40.00 12,000.00 7 500 Pcs Endotracheal Tube Id 3.5mm,uncuffed, Sterile, Single Use 40.00 20,000.00 8 200 Pcs Endotracheal Tube Id 4.5mm, Uncuffed, Sterile, Single Use 40.00 8,000.00 9 100 Pcs Endotracheal Tube Id 4mm, Uncuffed, Sterile, Single Use 40.00 4,000.00 10 50 Pcs Endotracheal Tube Id 5.5mm, Cuffed, Sterile, Single Use 40.00 2,000.00 11 50 Pcs Endotracheal Tube Id 5mm, Cuffed, Sterile, Single Use 40.00 2,000.00 12 500 Pcs Endotracheal Tube Id 7.5mm, Cuffed, Sterile, Single Use 40.00 20,000.00 13 800 Pcs Endotracheal Tube Id 7mm, Cuffed, Sterile, Single Use 40.00 32,000.00 14 100 Pcs Endotracheal Tube Id 8.0 Mm, Cuffed, Sterile, Single Use 40.00 4,000.00 15 50 Pcs Guide Wire For Ett Adult 250.00 12,500.00 16 50 Pcs Guide Wire For Ett Neonate 250.00 12,500.00 17 50 Pcs Guide Wire For Ett Pedia 250.00 12,500.00 18 10000 Pcs Nasal Cannula For Adult With Soft Tilted Prongs, Transparent Tubing, 5-7 Feet In Length Single Use, Eo Sterilized 18.00 180,000.00 19 5000 Pcs Nasal Cannula For Neonate With Soft Tilted Prongs, Transparent Tubing, 5-7 Feet In Length Single Use, Eo Sterilized 30.00 150,000.00 20 6000 Pcs Nasal Cannula For Pedia With Soft Tilted Prongs, Transparent Tubing, 5-7 Feet In Length Single Use, Eo Sterilized 18.00 108,000.00 21 1000 Pcs Nebulizing Kit W/ Face Mask, Disposable Neb Kit With Medication Cup 7' Crush Resistant Tubing, And Adult Aerosol Mask 35.00 35,000.00 22 1000 Pcs Nebulizing Kit W/ Face Mask, Disposable Neb Kit With Medication Cup 7' Crush Resistant Tubing, And Pediatric Aresol Mask 35.00 35,000.00 23 500 Pcs O2 Mask With Rebreathing Bag, Elongated Facemask For Long Term Use, Clear And Soft Mask For Patient Comfort, Adjustable Elastic Strip & Integrated Noseclip For Proper Positioning Of Mask, 210 Cm Long Star Lumen Tubing To Ensure Continuous Flow Of Oxygen, Proximal End Of Tube Is Connected With Funnel Shape Connector For Easy Connection With Oxygen Source, Star Lumen Main Tube To Avoid Accidental Blockage, Adult Size 80.00 40,000.00 24 500 Pcs O2 Mask With Rebreathing Bag, Elongated Facemask For Long Term Use, Clear And Soft Mask For Patient Comfort, Adjustable Elastic Strip & Integrated Noseclip For Proper Positioning Of Mask, 210 Cm Long Star Lumen Tubing To Ensure Continuous Flow Of Oxygen, Proximal End Of Tube Is Connected With Funnel Shape Connector For Easy Connection With Oxygen Source, Star Lumen Main Tube To Avoid Accidental Blockage, Pedia Size 80.00 40,000.00 25 500 Pcs Orapharyngeal Airway Disposable, Smooth, Flexible Polyethylene Airway With Reiforced Bite Block, Color Coded For Easy Identification, Single Use,latex Free, Full Range Of Size # 0 30.00 15,000.00 26 300 Pcs Orapharyngeal Airway Disposable, Smooth, Flexible Polyethylene Airway With Reiforced Bite Block, Color Coded For Easy Identification, Single Use,latex Free, Full Range Of Size # 00 30.00 9,000.00 27 1000 Pcs Orapharyngeal Airway Disposable, Smooth, Flexible Polyethylene Airway With Reiforced Bite Block, Color Coded For Easy Identification, Single Use,latex Free, Full Range Of Size # 2 30.00 30,000.00 28 80 Pcs Orapharyngeal Airway Disposable, Smooth, Flexible Polyethylene Airway With Reiforced Bite Block, Color Coded For Easy Identification, Single Use,latex Free, Full Range Of Size # 5 30.00 2,400.00 29 500 Pcs Adult Diaper Super Absorbent, Large 30.00 15,000.00 30 300 Pcs Arm Sling Constructed Of Lightweight Navy Canvass Material, Adjustable Strap Pedia Size 90.00 27,000.00 31 200 Pack Battery For Laryngoscope Size C , 2's / Pack 300.00 60,000.00 32 300 Pack Battery For Penlight (2pc) Double A 200.00 60,000.00 33 300 Pack Battery For Pulse Oximeter Triple A , 2's /pac 200.00 60,000.00 34 800 Pcs Clinical Digital Thermometer Dual Temperature Reading Degrees, Reliable Temperature Measurement, Flexible Tip, Lightweight,uses Lr41(1.55 Dc) Battery , Preferably With Free Extra Batteries. 80.00 64,000.00 35 10 Pcs Closed Suction System With Corrugated, With Integrated Filter To Minimise The Risk Of Cross-infection, Sealable Rinse Chamber To Avoid Unintentional Aspiration, Disconnection Ring For Fast And Safe Separation Of The System From The Tube, Graduation In 1 Cm Increments For Easier Reading Of Insertion Depth, One-way Valve In The Rinse Port,transparent Material For Easier Reading Of Depth Markings, Double Swivel Connector To Relieve Strain On Tube Or Cannula, Universal Connector To Fit Almost All Suction Tubes And Receptacles, 45cm, Size Ch 10 1,600.00 16,000.00 36 10 Pcs Closed Suction System With Corrugated, With Integrated Filter To Minimise The Risk Of Cross-infection, Sealable Rinse Chamber To Avoid Unintentional Aspiration, Disconnection Ring For Fast And Safe Separation Of The System From The Tube, Graduation In 1 Cm Increments For Easier Reading Of Insertion Depth, One-way Valve In The Rinse Port,transparent Material For Easier Reading Of Depth Markings, Double Swivel Connector To Relieve Strain On Tube Or Cannula, Universal Connector To Fit Almost All Suction Tubes And Receptacles, 45cm, Size Ch 12 1,600.00 16,000.00 37 30 Pcs Closed Suction System With Corrugated, With Integrated Filter To Minimise The Risk Of Cross-infection, Sealable Rinse Chamber To Avoid Unintentional Aspiration, Disconnection Ring For Fast And Safe Separation Of The System From The Tube, Graduation In 1 Cm Increments For Easier Reading Of Insertion Depth, One-way Valve In The Rinse Port,transparent Material For Easier Reading Of Depth Markings, Double Swivel Connector To Relieve Strain On Tube Or Cannula, Universal Connector To Fit Almost All Suction Tubes And Receptacles, 45cm, Size Ch 16 1,600.00 48,000.00 38 10 Pcs Closed Suction System With Corrugated, With Integrated Filter To Minimise The Risk Of Cross-infection, Sealable Rinse Chamber To Avoid Unintentional Aspiration, Disconnection Ring For Fast And Safe Separation Of The System From The Tube, Graduation In 1 Cm Increments For Easier Reading Of Insertion Depth, One-way Valve In The Rinse Port,transparent Material For Easier Reading Of Depth Markings, Double Swivel Connector To Relieve Strain On Tube Or Cannula, Universal Connector To Fit Almost All Suction Tubes And Receptacles, 45cm, Size Ch 8 1,600.00 16,000.00 39 50 Set 70mm Colostomy Set, 70mm Wafer - 1pc, 70mm Pouch - 1pc, Clip -1pc 245.00 12,250.00 40 50 Set 60mm Colostomy Set, 60mm Wafer - 1pc, 60mm Pouch - 1pc, Clip -1pc 245.00 12,250.00 41 150 Pcs Condom Catheter 35.00 5,250.00 42 500 Pcs Cotton Wool Roll 400g , Absorbent, Must Be In A Thick Plastic Packaging For The Safety Of The Item. 130.00 65,000.00 43 80 Pcs Chest Drainage Bottle Disposable. Specifications: Outlet, Intelport, Collection Chamber 1600ml, Drainage Tube, Funnel, Rotatable Bracket, Hanger. 949.00 75,920.00 44 3000 Pcs Curity Pads/under Pads, 60x90cm, 65g, Disposable, Outer Is Non-woven Fabric,wppd Pulp High Polymer Tissue Paper, Water Proof Pe Film. 25.00 75,000.00 45 200 Pack Ecg Electrodes, Disposable, Adhesive (adult) (50/pack) 450.00 90,000.00 46 200 Pack Ecg Electrodes, Disposable, Adhesive (pedia) (50/pack) 450.00 90,000.00 47 1000 Pcs Elastic Bandage 2"x 5 Yards Stretched, Color Flesh Or Brown, Polysester/ Rubber Thread Knit Bandage With Medtal Clip Closure, Open Wave Design Allows Air Circulation For Cool, Comfortable Wea, Consistent Elasticity For A Controlled Compressin Effect 25.00 25,000.00 48 3000 Pcs Elastic Bandage 4"x 5 Yards Stretched, Color Flesh Or Brown, Polysester/ Rubber Thread Knit Bandage With Medtal Clip Closure, Open Wave Design Allows Air Circulation For Cool, Comfortable Wea, Consistent Elasticity For A Controlled Compressin Effect 25.00 75,000.00 49 2000 Pcs Elastic Bandage 6"x 5 Yards Stretched, Color Flesh Or Brown, Polysester/ Rubber Thread Knit Bandage With Medtal Clip Closure, Open Wave Design Allows Air Circulation For Cool, Comfortable Wea, Consistent Elasticity For A Controlled Compressin Effect 40.00 80,000.00 50 200 Pcs Face Mask 3-ply With Noseclip And Tie, Made From Soft, Lightweight, Non-woven Fabric, 50's/box 100.00 20,000.00 51 50 Pcs Foley Bag Catheter Fr 10, Grey Balloon Port Marked With Recommended Volume Of Fluid, Urine Drainage Port Marked With French/mm Sizes) , With Balloon To Be Filled With Water From Balloon Port, 2 Way Standard 5.3mm/12-15ml 45.00 2,250.00 52 50 Pcs Foley Bag Catheter Fr 12, White Balloon Port Marked With Recommended Volume Of Fluid, Urine Drainage Port Marked With French/mm Sizes) , With Balloon To Be Filled With Water From Balloon Port, 2 Way Standard 5.3mm/12-15ml 45.00 2,250.00 53 1500 Pcs Foley Bag Catheter Fr 16, Orange Balloon Port Marked With Recommended Volume Of Fluid, Urine Drainage Port Marked With French/mm Sizes) , With Balloon To Be Filled With Water From Balloon Port, 2 Way Standard 5.3mm/12-15ml 45.00 67,500.00 54 50 Pcs Foley Bag Catheter Fr 8, Grey Balloon Port Marked With Recommended Volume Of Fluid, Urine Drainage Port Marked With French/mm Sizes) , With Balloon To Be Filled With Water From Balloon Port, 2 Way Standard 5.3mm/12-15ml 45.00 2,250.00 55 300 Pcs Foley Bag Catheter, Fr 18, Red Balloon Port Marked With Recommended Volume Of Fluid, Urine Drainage Port Marked With French/mm Sizes) , With Balloon To Be Filled With Water From Balloon Port, 2 Way Standard 5.3mm/5-15ml 45.00 13,500.00 56 200 Pcs Foley Bag Catheter Fr 22, Violet Balloon Port Marked With Recommended Volume Of Fluid, Urine Drainage Port Marked With French/mm Sizes) , With Balloon To Be Filled With Water From Balloon Port, 3 Way 30ml 350.00 70,000.00 57 30 Pcs Hot Water Bag, Rubber, Later Free, Heavy Duty 150.00 4,500.00 58 80 Pcs Incentive Spinometer,three Balls Adult, Volume Measurement Up To 2500ml, With Good-better-best Window, Compact, Ergonomic Design, With Built-in Handle, With Particulate Filter Screen In Mouthpiece Individually Packed. 300.00 24,000.00 59 5000 Pack Interfolded Paper Towels, 175 Pulls Per Pack, Good Quality 100.00 500,000.00 60 8000 Pcs Lubricating Jelly, 5-10g, Water Soluble 10.00 80,000.00 61 800 Pcs Mucus Trap / Suction Specimen Trap, Trap Is Graduated To 20cc, Container Seals Tightly For Safe Transport To Lab, Fr. 14, Adult 60.00 48,000.00 62 3000 Pcs Newborn/infant Diapers, Absorbent 10.00 30,000.00 63 300 Pcs Ngt Fr 10, Low Coefficient Of Friction Minimises Tissue Damage Silicon Elastomer Provides Inert Coating Avoiding Adverse Effects Of Pvc, Non-toxic Material, Medical Grade Pvc, Proximal End, Make Sure The Connector Fits The Asepto Syringe 100ml. Single Use, Eo Sterilized, Non-toxic, Pyrogenic Free 25.00 7,500.00 64 800 Pcs Ngt Fr 12, Low Coefficient Of Friction Minimises Tissue Damage Silicon Elastomer Provides Inert Coating Avoiding Adverse Effects Of Pvc, Non-toxic Material, Medical Grade Pvc, Proximal End, Make Sure The Connector Fits The Asepto Syringe 100ml. Single Use, Eo Sterilized, Non-toxic, Pyrogenic Free 25.00 20,000.00 65 500 Pcs Ngt Fr 14, Low Coefficient Of Friction Minimises Tissue Damage Silicon Elastomer Provides Inert Coating Avoiding Adverse Effects Of Pvc, Non-toxic Material, Medical Grade Pvc, Proximal End, Make Sure The Connector Fits The Asepto Syringe 100ml. Single Use, Eo Sterilized, Non-toxic, Pyrogenic Free 25.00 12,500.00 66 1500 Pcs Ngt Fr 16, Low Coefficient Of Friction Minimises Tissue Damage Silicon Elastomer Provides Inert Coating Avoiding Adverse Effects Of Pvc, Non-toxic Material, Medical Grade Pvc, Proximal End, Make Sure The Connector Fits The Asepto Syringe 100ml. Single Use, Eo Sterilized, Non-toxic, Pyrogenic Free 195.00 292,500.00 67 2000 Pcs Ngt Fr 5, Low Coefficient Of Friction Minimises Tissue Damage Silicon Elastomer Provides Inert Coating Avoiding Adverse Effects Of Pvc, Non-toxic Material, Medical Grade Pvc, Proximal End, Make Sure The Connector Fits The Asepto Syringe 100ml. Single Use, Eo Sterilized, Non-toxic, Pyrogenic Free 25.00 50,000.00 68 3000 Pcs Ngt Fr 8, Low Coefficient Of Friction Minimises Tissue Damage Silicon Elastomer Provides Inert Coating Avoiding Adverse Effects Of Pvc, Non-toxic Material, Medical Grade Pvc, Proximal End, Make Sure The Connector Fits The Asepto Syringe 100ml. Single Use, Eo Sterilized, Non-toxic, Pyrogenic Free 25.00 75,000.00 69 500 Pcs Pediatric Urine Collector 20.00 10,000.00 70 100 Pcs Penrose Drain, Cigarette Size 18x1" 50.00 5,000.00 71 200 Pcs Penrose Drain, Cigarette Size 18x1/2" 50.00 10,000.00 72 300 Pcs Penrose Drain, Cigarette Size 18x1/4" 50.00 15,000.00 73 1500 Bot Plain Nss Irrigation 1l, Each 100ml Contains 0.9% Sodium Chlorides, 900mg Water For Injection. The Solution Must Be In A Clear Container With A Resealable Plastic Cap. 120.00 180,000.00 74 500 Pcs Plaster Of Paris 4 Inch X 5 Yrds 80.00 40,000.00 75 300 Pcs Plaster Of Paris 6 Inch X 5yrds 80.00 24,000.00 76 500 Pcs Sharp Container Inner Container 5.4 Qt. Horizontal Typehorizontal Type Inner Container, 5.4 Quarter, Counter Balance, Tamper Resistance, Dimension: 10.75 Inches X12 Inches X 4.5 Inche 450.00 225,000.00 77 50 Pcs Spo2 Adhesive Sensor Circuit,must Fit With Neonate, Pedia, Adult. Length : 0.9m 1,000.00 50,000.00 78 300 Pcs Suction Catheter Fr. 10, Flexible, Transparent Silk Surfaceand Smoothly Rounded Tip Provides Protection On Sensitive Tissues, Color Coded Connection For Easy Identification, Sterile, Double-peel Pack And Ready To Use 25.00 7,500.00 79 300 Pcs Suction Catheter Fr. 12, Flexible, Transparent Silk Surfaceand Smoothly Rounded Tip Provides Protection On Sensitive Tissues, Color Coded Connection For Easy Identification, Sterile, Double-peel Pack And Ready To Use 25.00 7,500.00 80 800 Pcs Suction Catheter Fr. 14, Flexible, Transparent Silk Surfaceand Smoothly Rounded Tip Provides Protection On Sensitive Tissues, Color Coded Connection For Easy Identification, Sterile, Double-peel Pack And Ready To Use 25.00 20,000.00 81 3000 Pcs Suction Catheter Fr. 16, Flexible, Transparent Silk Surfaceand Smoothly Rounded Tip Provides Protection On Sensitive Tissues, Color Coded Connection For Easy Identification, Sterile, Double-peel Pack And Ready To Use 25.00 75,000.00 82 2000 Pcs Suction Catheter Fr. 5, Flexible, Transparent Silk Surfaceand Smoothly Rounded Tip Provides Protection On Sensitive Tissues, Color Coded Connection For Easy Identification, Sterile, Double-peel Pack And Ready To Use 25.00 50,000.00 83 3000 Pcs Suction Catheter Fr. 8, Flexible, Transparent Silk Surfaceand Smoothly Rounded Tip Provides Protection On Sensitive Tissues, Color Coded Connection For Easy Identification, Sterile, Double-peel Pack And Ready To Use 25.00 75,000.00 84 300 Pcs Suction Machine Connecting Tube, Diameter 7mm Length: 210-230cm 300.00 90,000.00 85 40 Box Surgical Plastic Tape Transparent, Porous, Plastic, Easy, Straight, Bi-directional Tear Easy To Handle With Gloves, Water Resistant, Perforated Plastic Tape That Tears Easily, 1"x10 Yrd, 12's/box (plaster 1") 750.00 30,000.00 86 50 Box Surgical Plastic Tape Transparent, Porous, Plastic, Easy, Straight, Bi-directional Tear Easy To Handle With Gloves, Water Resistant, Perforated Plastic Tape That Tears Easily, 1/2"x10 Yrd, 24's/box (plaster 1/2") 750.00 37,500.00 87 50 Pcs Tape Measure 100.00 5,000.00 88 10 Pcs Tracheostomy Tube With Disposable Inner Cannula, (fenestrated) Adult, Size 3.0 7,500.00 75,000.00 89 10 Pcs Tracheostomy Tube With Disposable Inner Cannula, (fenestrated) Adult, Size 6.0 7,500.00 75,000.00 90 10 Pcs Tracheostomy Tube With Disposable Inner Cannula, (fenestrated) Adult, Size 7.0 7,500.00 75,000.00 91 100 Box Transparent Split Septum Needless Port With 0.10 Ml Priming Volume, Clear Housing Allow Visualization Of Fluids, 50's/box 4,500.00 450,000.00 92 500 Pcs Triple Lumen 15cm Macrobore Tri-extension Set With Luer Lock Needleless Split Septum Adapter· Priming Volume 2.25ml With Flow Rate 445ml/min With Sliding Clamp Clear Housing With Straight Fluid Pathwaylipid Compatibility, Latex Free, And Dehp Free Tubings. 350.00 175,000.00 93 8000 Pcs Urine Drainage Bag, 2000ml Capacity With Accurate Calibration For Measurement With Adjustable Hanger And Bottom Outlet, With Safe Slide Valve Used To Empty The Bag, Single Use, Non-toxic, Pyrogenic Free, All Included Items Must Be Packed In One Easy To Peel Plastic. 35.00 280,000.00 94 2000 Pcs Wadding Sheet Orthopoedic Padding 4inch X 5yrds Non Wooven, Hypoallergenic Porous Fabric, Smooth 50.00 100,000.00 95 1500 Pcs Wadding Sheet Orthopoedic Padding 6inch X 5yrds Non Wooven, Hypoallergenic Porous Fabric, Smooth 50.00 75,000.00 96 250 Box Wooden Tongue Depressor, Sterile Individaul Packed, 100's/box 250.00 62,500.00 97 2000 Pcs Wrist Splint Adult With Plastic Cover, Padded, Velcro Strap, Medium 70.00 140,000.00 98 2500 Pcs Wrist Splint Neonatal With Plastic Cover, Padded, Velcro Strap, Medium Size 45.00 112,500.00 99 1000 Pcs Wrist Splint Pedia With Plastic Cover, Padded, Velcro Strap, Medium Size 54.00 54,000.00 100 200 Pcs Zinc Oxide Adhesive Tape 4"x5y, Brown/white, Adhesive Ensures Exceptional High Initial And Permanent Adhesion, Material Is Extremely Resistant To Tension, Dirt And Moisture, Breathable Material. 650.00 130,000.00 101 50 Bot Hydrogen Peroxide 500 Ml 10 Volumes Antiseptic/disinfectant 450.00 22,500.00 102 2000 Kit Admission Kits: 1 Pc Digital Thermometer; 1 Bot Alcohol 60 Ml; 1 Pc Soft Bristled Toothbrush; 1 Tube Toothpaste 25 Ml; 1 Roll Tissue Paper 2 Ply; 1 Pack Detergent Powder 70ml; 1 Bar Soap 60g; 1 Pc Cotton, White Face Towel 100cmx50cm; 1 Pc Calibrated Drinking Glass; 2 Pcs Stainless Steel Spoons; 1 Pc Printed, Colored Hospital Brochure ( Containing Service Offered, Patient's Right, Patients Resposibilities , Discharge Requirements And Instructions ) Packaging: All Items Must Fit In A Waterproof Bag, Should Have Cloth Bag With Loop Handle & Zipper (maroon/green) With Printed Hospital Logo 500.00 1,000,000.00 Project X Procurement Of Various Supply Of Patients Thermal Id Wristband And Thermal Papers (award Per Item) Nep 633,000.00 1,000.00 1 40 Rolls Thermal Id Wristband, Adult Size Must Be Compatible With Existing Machine (essential Safeband), Id Wristband Should Be Fitted For Adult Patients, Id Wristband Should Be Waterproof And Alcohol Resistant, Should Be Lock Type And Disposable, Id Wristband Print Are Should Not Be Less Than 8cm X 3cm, Id Wristband Should Be Barcode Ready, Minimum Of 200 Pcs / Roll 7,000.00 280,000.00 2 10 Rolls Thermal Id Wristband, Pedia Size (blue), Must Be Compatible With Existing Machine (essential Safeband), Id Wristband Should Be Fitted For Pediatric Patients, Id Wristband Should Be Waterproof And Alcohol Resistant, Should Be Lock Type And Disposable, Id Wristband Print Are Should Not Be Less Than 8cm X 3cm, Id Wristband Should Be Barcode Ready, Minimum Of 200 Pcs / Roll 7,000.00 70,000.00 3 10 Rolls Thermal Id Wristband, Pedia Size (pink), Must Be Compatible With Existing Machine (essential Safeband), Id Wristband Should Be Fitted For Pediatric Patients, Id Wristband Should Be Waterproof And Alcohol Resistant, Should Be Lock Type And Disposable, Id Wristband Print Are Should Not Be Less Than 8cm X 3cm, Id Wristband Should Be Barcode Ready, Minimum Of 200 Pcs / Roll 7,000.00 70,000.00 4 50 Pcs Thermal Paper 57mm X 30-40mm For Newborn Hearing Machine.model: Neurosoft 00392049 150.00 7,500.00 5 50 Pcs Ultrasound Thermal Print Media, Type Ii High - Density, Upp- 110hd, 110mm Wide X 20m Long, With Approximately 270 Prints Per Roll, Must Be Compatible With Existing Sony Printer., With Model No. D898md 1,200.00 60,000.00 6 80 Pad Ctg Paper Compatible W/ Procured Ctg Unit (ms Fetal Monitor Basic Sunray Srf618b6) 350.00 28,000.00 7 50 Rolls Ecg Thermal Paper 110mm X 28.5m, Compatible With Procured Machine Tc10 Phlps 850.00 42,500.00 8 50 Pads Ecg Paper Cp150, W: 22.5cm H: 11.5cm Depth: 29cm Compatible With Welch Allyn Machine Cp 150 Ekg Machine 1,500.00 75,000.00 Project Xi Procurement Of Various Medical Supplies For Delivery Room & Ob Gyne Ward (award Per Item) 2,608,500.00 3,000.00 1 50 Boxes Disposable Cord Clamp, Plastic, Sterile, 100/box 350.00 17,500.00 2 700 Pcs Rubber Suction Bulb 30 - 60ml (small For Neonate) 60.00 42,000.00 3 3000 Pcs Straight Cath Fr.14 (10/box), Transparent Silk Surface, Smoothly Rounded Tip, E.o. Sterile 15.00 45,000.00 4 500 Pcs Straight Cath Fr.16 (10/box), Transparent Silk Surface, Smoothly Rounded Tip, E.o. Sterile 15.00 7,500.00 5 28 Gals Ultrasound Transmission Gel, Water Soluble / 5 Liters Gallon. With Free 1 Bottle Dispenser 250ml In Every Gallon. 1,000.00 28,000.00 6 30 Gals Vacuum Delivery System, With Palm Pump, Versatile Use, Complete Control Of A Single Operator, Flexible Stem, Low Cup Profile, Disposable. 4,200.00 126,000.00 7 50 Pcs Manual Vacuum Aspirator With 2 Ml Tube Of Silicone. With 9 Pcs. Cannulae ((sizes - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm) 1pc. Adapter. 2,050.00 102,500.00 8 4000 Pcs Isolation Gown Blue 40gsm (120x140cm) Knitted 60.00 240,000.00 9 1000 Kits Ob Kit Bag 2,000.00 2,000,000.00 Project Xii Procurement Of Various Supplies For Radiology Department Use (award Per Item) 398,765.70 500.00 1 10 Boxes Medical Dry Imaging Film Di-hl 14 X 17, 100's/box 9,700.00 97,000.00 2 10 Boxes Medical Dry Imaging Film Di-ht 14 X 17, 100's/box 8,930.00 89,300.00 3 5 Boxes Medical Dry Imaging Film Di-hl 8 X 10, 50's/box 4,688.00 23,440.00 4 200 Pcs Syringe Kit Pack 200ml,spike, J-tube And Y-tube 880.00 176,000.00 5 10 Reams X-ray Envelope 14 X 17, 100's/ream 684.00 6,840.00 6 10 Reams X-ray Envelope 11 X 14, 100's/ream 618.57 6,185.70 Project Xiii Procurement Of Various Supplies For Pulmonary Unit Use (award Per Item) 653.000.00 1,000.00 1 131 Pcs Adult Ventilator Circuit With 2 Water Trap With Nebkit With 2 Bacterial Filter, 1 Hmef, 1 Auto-refill Humidification Chamber And 1 Expiratory Valve Adaptor 1,400.00 183,400.00 2 40 Pcs Pedia Ventilator Circuit With 2 Water Trap With Nebkit With 2 Bacterial Filter, 1 Hmef, 1 Auto-refill Humidification Chamber And 1 Expiratory Valve Adaptor 1,400.00 56,000.00 3 40 Pcs Neonatal Ventilator Circuit With 2 Water Trap With Nebkit With 2 Bacterial Filter, 1 Hmef, 1 Auto-refill Humidification Chamber And 1 Expiratory Valve Adaptor 1,400.00 56,000.00 4 16 Pcs High Flow Nasal Cannula Nasal Prong Interface With Humidifier Adult, With Single Heated Circuit Tubings, With Mr290 Chamber. 8,000.00 128,000.00 5 8 Pcs High Flow Nasal Cannula Nasal Prong Interface With Humidifier Pedia, With Single Heated Circuit Tubings, With Mr290 Chamber. 8,000.00 64,000.00 6 40 Pcs Heat Exchange Moisture Filter (hmef) 400.00 16,000.00 7 48 Pcs Bacterial Filter 200.00 9,600.00 8 40 Pcs Auto-refill Humidification Chamber 600.00 24,000.00 9 40 Pcs Spiroscout Mouthpiece For Pulmonary Function Test 340.00 13,600.00 10 40 Pcs Peak Expiratory Flow Rate 300.00 12,000.00 11 40 Pcs Mdi Adaptor 100.00 4,000.00 12 4 Pcs Niv Mask W/ Harness (medium - Adult)mask Type: Non-vented Mask With Orogastric And Nasogastric Tube Port 7,500.00 30,000.00 13 40 Pcs Endotracheal Tube Collar 200.00 8,000.00 14 16 Pcs Disposable Capnograph 500.00 8,000.00 15 40 Pcs In-line T-piece/t-piece Connector 400.00 16,000.00 16 2 Pcs Nasal Tubing Universal (70 Mm)- Spiral-heated Wire 4,000.00 8,000.00 17 1 Pcs Nasal Prong (3.5 Mm/2.0 Mm) 2,800.00 2,800.00 18 1 Pcs Nasal Prong (5.0 Mm/4.0 Mm) 2,800.00 2,800.00 19 1 Pcs Nasal Prong (6.0 Mm/6.0 Mm) 2,800.00 2,800.00 20 1 Pcs Infant Bonnet (17-22 Cm) 4,000.00 4,000.00 21 1 Pcs Infant Bonnet (25-29 Cm) 4,000.00 4,000.00 Project Xiv Procurement Of Various Medical Supplies For Physical & Rehabilitation Medicine (award Per Item) 376,750.00 500.00 1 62 Bot 2-propanolol Benzalkonium Chloride 1l Bot Spray 1,325.00 82,150.00 2 300 Pack Wet Wipes 80-100 Pcs/pack, Alcohol Free 110.00 33,000.00 3 100 Pcs Electrical Stimulator Pads Standard Size 106.00 10,600.00 4 20 Pcs Athletic Tape, 5cm X 5m 400.00 8,000.00 5 150 Pcs Parafin Wax 1 Pound / Block 1,500.00 225,000.00 6 20 Pcs Kinesiology Tape, 5cm X 5m 900.00 18,000.00 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedure Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act” 3. Bidding Documents Are Readily Available At The Bac Sec/pu Office Upon Payment Of The Corresponding Bidding Documents Fee, As Indicated In The Table Above. The Procuring Entity Has Posted The Complete Set Of Bidding Documents At Its Website, And On The Philgeps Website. Bidding Documents May Be Downloaded From Any Of The Said Websites; Provided, Upon Submission Of Their Bids, The Bidders Shall Pay The Applicable Fee. 4. Bids Must Be Duly Received By The Bac Secretariat At The Address And Schedule Described Above. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Bidding Documents. 5. The Bids Can Be Submitted Either Manually Or Electronically In Accordance With Section 25 Of The 2016 Revised Irr Of Ra 9184. If Electronically, Bids Must Be Submitted Online Using The Link: Https://sites.google.com/view/csmc-bid/home And Received By The Procuring Entity On Or Before October 30, 2024 @ 9:30 A.m. Late Bids Shall Not Be Accepted. Opening Of Bids Shall Be Online In The Presence Of Bidders Or Authorized Representative Who Wish To Attend Via Link Given. We Encourage Bidders Or Authorized Representatives Supported By Spa Or Secretary Certificate To Attend The Opening Of Bids. 6. The Following Activities Are Scheduled On The Following Dates: Posting Of Invitation To Bid : October 07, 2024 Pre-bid Conference : October 15, 2024 (1:30 Pm Via Microsoft Teams) Bid Opening : October 30, 2024 (9:30 Am Via Microsoft Teams) Bid Evaluation : Within 7 Days From Bid Opening Post Qualification : Within 12 Calendar Days From Determination Of Lcb 7. Cebu South Medical Center Reserves The Right To Accept Or Reject Any Bid To Annul The Bidding Process And To Reject Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. This Is In Compliance With Gppb Circular 06-2019 And Is Short Of Award. For Further Information, Please Refer To: Contact Person: Mary Ann G. Lozada Bac Secretariat, Head Cebu South Medical Center Cel. No. 09453473696 / 09189679068 San Isidro, Talisay City, Cebu Atty. Madyll S. Cuadra-robinta, Cese, Fpcha Bac Chairperson