Scanning Tenders

Details: Description Request For Quotation 1. The Bangko Sentral Ng Pilipinas Requests The Submission Of Quotations/proposals For The Following Requirement/s: Name Of The Requirement/brief Description/approved Budget For The Contract (abc): Supply And Delivery Of Various Office Supplies, As Per Bsp Minimum Technical Specifications: Lot No. Reference Description/qty. Abc, Inclusive Of All Applicable Taxes And Other Charges 1 Bac-ho Gs No. 2024-0150 Dated 27 December 2023 3,000 Pcs. Envelope, Letter, With Print Php26,220.00 2 Bac-ho Gs No. 2024-0151 Dated 27 December 2023 500 Pcs. Envelope, Documentary, With Print Php10,290.00 3 Bac-ho Gs No. 2024-0167 Dated 28 December 2023 500 Pcs. Envelope, Expanding, With Print Php28,985.00 4 Bac-ho Gs No. 2024-0166 Dated 28 December 2023 500 Pcs. Chicago Screw, 1.25” Php4,250.00 5 500 Pcs. Chicago Screw, 1.50” Php4,750.00 6 500 Pcs. Chicago Screw, 1.75” Php6,250.00 (quotations/proposals Exceeding The Abc Per Lot Shall Be Disqualified.) Delivery Period For All Lots : Within Forty-five (45) Calendar Days Reckoned From The Date Of The Execution Of The Purchase Order. Alternative Method Of Procurement : Negotiated Procurement – Small Value Procurement 2. All Particulars And Activities Relative To Eligibility Of Suppliers, Evaluation Of Quotations/proposals, Validation, And Award Of Contract Shall Be Governed By 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Revised Irr). Activity Schedule Details A. Issuance Of Rfq Starting 09 January 2024 Hard Copies Of Documents Are No Longer Issued For The Duration Of Community Restrictions B. Deadline Of Submission Of Quotations/ Proposals 12 January 2024; 12:00 N.n. Late Bids Shall Not Be Accepted. • Online Or Electronic Submission To The Following E-mail: A. Prmdi-dpc@bsp.gov.ph B. Guevarrarv@bsp.gov.ph Or • Physical Submission Of Hard Copy At Designated Bid Box For Delegated Procurement Located At Gate 3 Reception Lobby, Bangko Sentral Ng Pilipinas, A. Mabini Corner P. Ocampo Sr. Sts., Malate, Manila C. Opening Of Quotations/proposals How To Submit Quotation/proposal For Manual Submission: 1. Supplier’s Representative Or Courier Service Provider Shall Fill-up The Bid Submission Form (bsf) Available At The Gate 3 Reception Lobby. 2. Insert The Bsf (front Portion Facing Up) In The Time Stamp Machine Twice To Indicate The Time Of Submission Of The Quotation/proposal In The Bsf 3. Drop The Quotation/ Proposal In The Bid Box. As Precautionary Measure, Participating Suppliers Are Instructed To: 1. Wrap/enclose Bidding Documents With Plastic, Preferably Clear To Facilitate Disinfection/sanitation; 2. Submit Documents At Least Thirty (30) Minutes Before The Scheduled Deadline Of Submission To Allow Time For Possible Queuing Due To Conduct Of Thermal Scanning, And For Sanitation Of The Bid Envelope(s) And Transit Of The Documents To The Procurement Management Department Office. All Written Requests/queries: Procurement Management Department Room 212, 2nd Floor, 5-storey Building Bangko Sentral Ng Pilipinas A. Mabini Corner P. Ocampo Sr. Streets, Malate, Manila Fax No.: (+632) 8708-7115 E-mail: Prmdi-dpc@bsp.gov.ph Note: All Requests Shall Be In Writing And Addressed To The Director, Procurement Management Department I. 3. Submit The Properly Filled Up Quotation/proposal On Or Before The Deadline Set Above (use Bsp-prescribed Form). Suppliers Can Modify Or Withdraw Their Quotations/proposals At Any Time Before The Deadline For The Submission And Receipt Thereof; Provided, That They Send Another Quotation/proposal, Which Is Labelled As A “modification” Of The One Previously Submitted. Prospective Suppliers Shall Have The Option Of Submitting Quotations/proposals On Any Or All Lots And Evaluation And Contract Award Shall Be Undertaken On A Per Lot Basis. 4. The Supplier With The Single/lowest Calculated Quotation (s/lcq) Shall Submit The Following Requirements Within Five (5) Calendar Days From Receipt Of Notice From The Prmd. Failure To Submit The Requirements Within The Period Prescribed Shall Result In The Non-compliance Of The Supplier’s Quotation/proposal. A. Legal Documents: A.1 Philippine Government Electronic Procurement System (philgeps) Registration Number; A.2 Valid Mayor’s/business Permit; And A.3 Supplier’s Notarized Omnibus Sworn Statement (use Gppb Prescribed Form As Per Gppb Resolution No.16-2020) Together With The Notarized Proof Of Authorization (e.g., Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney). Notes: I. If Bidding As A Joint Venture (jv), All Partners Must Submit The Above Documents; Ii. In Lieu Of The Mayor’s Permit And Philgeps Registration Number, The Philgeps Certificate Of Platinum Membership, Including Annex A, May Be Submitted, Provided That The Details Of The Mayor’s Permit Under Annex A Must Be Valid As Of Bidding Date; And Iii. For Individuals Engaged Under 53.9 Of The 2016 Revised Irr, Only The Bir Certificate Of Registration Shall Be Submitted In Lieu Of Dti Registration And Mayor’s Permit. B. Technical Documents: B.1 Valid Notarized Jv Agreement (jva), If Applicable. B.2 Bsp Terms And Conditions Duly Signed By The Supplier’s Authorized Representative On The Conforme Page. B.3 Bsp Minimum Technical Specifications Duly Signed By The Supplier’s Authorized Representative On The Conforme Page. B.4 For Lots 1-3: Submission Of Actual Sample As Per Specifications Stated In The Bsp Minimum Specifications If Submittals Are Non-compliant With The Technical Specifications, The S/lcq Shall Be Given Only One Chance To Submit A Rectified Sample Within Seven (7) Working Days From Receipt Of Notice Notes: I. The Soft Copy Of The Bsp Logo Shall Be Given To The Lowest/single Calculated Quotation Together With The Notice From Prmd I. Ii. The Address For Submission Of Actual Sample Is Gate 5, Bangko Sentral Ng Pilipinas, A. Mabini Corner P. Ocampo Sr. Sts., Malate, Manila 1004. Iii. As Social Distancing Measure, Suppliers Can Leave Their Samples/documents In The Designated Box At Gate 5 Reception Lobby And Have These Acknowledged Thru The Time And Date Stamp Machine Stationed In The Same Location. B.5 For Lots 4-6: Supplier’s Proof Of Offer Containing All The Technical Information Listed In The Attached Bsp-supplied Evaluation Matrix (bspsem) And Other Relevant Information Necessary For Validation. In Any Of The Following: I. Original Or Copy Of The Printed Product Brochure(s) From The Manufacturer; Or Ii. Printed Product Brochure(s) Downloaded From The Internet With Indication Of Its Source (e.g. Website). Or Iii. Picture With Technical Information; Or Iv. Actual Sample B.6 Bsp Supplied Evaluation Matrix (bspsem) Duly Accomplished By The Supplier’s Authorized Representative. Notes: I. Bidder Shall Indicate Under Column 2 The Specifications Of Its Actual Offer And Under Column 3, The Documents That Will Support Its Statement In Column 2. Ii. The Bspsem Need Not Be Signed By The Bidder’s Authorized Representative But Must Be Accomplished And Submitted As Per Schedule Indicated Above. 5. The Scanned Actual Signature Of The Authorized Representative Of The Prospective Bidder, Cropped And Pasted Handwritten Signatures, Adobe-created Signatures, Unique Figures And Symbols And Stamped Signatures Are Acceptable As E-signatures. Provided, That Original Documents Not Using Digital Signatures Shall Be Transmitted During Contract Execution. However, Text-typing The Name Of The Bidder And/or The Words “sgd. Or Original Signed” And The Like Without Distinctive Features Are Not Acceptable. 6. The Bsp Assumes No Responsibility Whatsoever To Compensate Or Indemnify Any Supplier For Expenses Incurred In The Preparation Of Quotations/proposals. 7. The Bsp Reserves The Right To Reject The Quotations/proposals Or Not Award The Contract And Makes No Assurance That A Contract Shall Be Entered Into As A Result Of This Request. 8. The Bsp May Suspend The Conduct Of Procurement Activities Adversely Affected Or Interrupted By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions At Any Time During The Existence Of Such Calamity, Or Quarantine Or Similar Restrictions, And When It Has Assessed Or Determined That: (a) No Supplier Will Be Able To Submit A Quotation/proposal Or Comply With The Requirements Of The Procurement Rules Due To The Limitations Resulting From The Declaration Of A State Of Calamity, Or Implementation Of A Community Quarantine Or Similar Restrictions; Or (b) Conduct Of Procurement Activities Cannot Be Undertaken Without Endangering The Health And Welfare Of Its Personnel Despite The Work From Home Or Other Alternative Work Arrangements. 9. The Bsp May Cancel Or Terminate The Conduct Of Procurement Activities, For Any Justifiable Reason, Such As But Not Limited To: (a) Physical And Economic Conditions Have Significantly Changed So As To Render The Project No Longer Economically, Financially, Or Technically Feasible, As Determined By The End-user Unit; (b) Project Is No Longer Necessary As Determined By The End-user Unit; (c) Source Of Funds For The Project Has Been Withheld Or Reduced Through No Fault Of The Bsp; Or (d) Brought About By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions (sec. 35.6 Of The 2016 Revised Irr). 10. The Bsp May Declare Failure Of Bidding/procurement Based On Its Assessment And Review Of All Its Planned And Ongoing Procurement Pursuant To Section 1 Of Gppb Resolution No. 09-2020. 11. The Bsp Aims To Ensure That Only Vendors/suppliers With Known Experience And Proven Capability On The Requirements Of The Particular Contract Should Continue To Participate In Bsp Procurement. Hence, In Line With Section 9(e) Of The 2016 Revised Irr Of R.a. No. 9184, The Bsp Evaluates The Performance Of Suppliers/vendors By Rating The Supplier’s Responsiveness To Bsp Specifications/terms Of Reference, Promptness Of Delivery, Quality Of Goods/services, And Offer’s Value For Money. Sgd Leidy Zara Myeth B. Loreto Manager Attachments: Bsp Quotation/proposal Form Bsp Terms And Conditions Bsp Minimum Technical Specifications Bsp Supplied Evaluation Matrix Omnibus Sworn Statement Corporate Secretary’s Certificate/ Special Power Of Attorney

Details: Description Request For Quotation 1. The Bangko Sentral Ng Pilipinas Requests The Submission Of Quotations/proposals For The Following Requirement/s: Name Of The Requirement/brief Description : Supply, Delivery And Installation Of Main Disconnect Circuit Breaker Complete With Power Meter And Current Transformer At Bsp Bacolod Branch, As Per Bsp Terms Of Reference, Terms And Conditions And Annexes Approved Budget For The Contract (abc) : Php500,000.00, Inclusive Of All Applicable Taxes And Other Charges (quotations/proposals Exceeding This Amount Shall Be Disqualified.) Contract Duration/completion Time : The Project Shall Be Completed Within Sixty (60) Calendar Days Reckoned From The Date Stipulated In The Ntp To Be Issued By Facilities Management And Engineering Department (fmed). Reference : Bac-ho Gs No. 2024-0686 Dated 08 April 2024 Alternative Method Of Procurement : Negotiated Procurement – Small Value Procurement 2. All Particulars And Activities Relative To Eligibility Of Suppliers, Evaluation Of Quotations/proposals, Validation, And Award Of Contract Shall Be Governed By 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Revised Irr). Activity Schedule Details A. Issuance Of Rfq Starting 15 April 2024 In Support Of The Sustainable Banking Program Of The Bsp, Hard Copies Are No Longer Issued. B. Site Inspection Monday To Friday 8:00 A.m. - 5:00 P.m. Before Deadline Of Submission Of Quotations/proposals Engr. Aljon Rufino V. Cado Bsp Head Office Tel. Nos.: 8708-7701 Local 3532 Cell No.: 0917-54970871 C. Deadline Of Submission Of Quotations/ Proposals 18 April 2024; 12:00 N.n. Late Bids Shall Not Be Accepted. • Online Or Electronic Submission To The Following E-mails: A. Prmdi-dpc@bsp.gov.ph B. Guevarrarv@bsp.gov.ph Or • Physical Submission Of Hard Copy At Designated Bid Box For Delegated Procurement Located At Gate 3 Reception Lobby, Bangko Sentral Ng Pilipinas, A. Mabini Corner P. Ocampo Sr. Sts., Malate, Manila How To Submit Quotation/proposal For Manual Submission: 1. Supplier’s Representative Or Courier Service Provider Shall Fill-up The Bid Submission Form (bsf) Available At The Gate 3 Reception Lobby. 2. Insert The Bsf (front Portion Facing Up) In The Time Stamp Machine Twice To Indicate The Time Of Submission Of The Quotation/proposal In The Bsf 3. Drop The Quotation/ Proposal In The Bid Box. As Precautionary Measure, Participating Suppliers Are Instructed To: 1. Wrap/enclose Bidding Documents With Plastic, Preferably Clear To Facilitate Disinfection/sanitation; 2. Submit Documents At Least Thirty (30) Minutes Before The Scheduled Deadline Of Submission To Allow Time For Possible Queuing Due To Conduct Of Thermal Scanning, And For Sanitation Of The Bid Envelope(s) And Transit Of The Documents To The Procurement Management Department Office. For Electronic Submission: 1. Save, Copy Or Transfer All Electronic Documents In Separate Compressed/zipped Folders 2. Zipped Electronic Bid Folders To Be Submitted Can Be Opened Using The 7-zip Compression Tool 3. The Subject Matter Of The E-mail Shall State The Short Title Of The Requirement To Be Procured As Stated In The Procurement Opportunity, Name Of Bidder (all Caps) And The Folder And Batch Number Of The Documents Sent 4. To Avoid The Tampering Or Alteration Of Electronic Documents, Files Shall Be Sent As Attachment/s To The E-mail And Not Through A File Sharing Link. The Bsp System Can Accommodate Attachments With File Size Limit Of Up To 100mb. If The Bidder’s E-mail Has A Smaller File Size Limit (e.g., In Case Of Free Mails, Such As Gmail And Yahoomail), It May Send Files In Batches All Written Requests/queries: Procurement Management Department I Room 212, 2nd Floor, 5-storey Building Bangko Sentral Ng Pilipinas A. Mabini Corner P. Ocampo Sr. Streets, Malate, Manila Fax No.: (+632) 8708-7115 E-mail: Prmdi-dpc@bsp.gov.ph Note: All Requests Shall Be In Writing And Addressed To The Director, Procurement Management Department I. 3. Submit The Properly Filled Up Quotation/proposal On Or Before The Deadline Set Above (use Bsp-prescribed Form). Suppliers Can Modify Or Withdraw Their Quotations/proposals At Any Time Before The Deadline For The Submission And Receipt Thereof; Provided, That They Send Another Quotation/proposal, Which Is Labelled As A “modification” Of The One Previously Submitted. 4. The Supplier With The Single/lowest Calculated Quotation (s/lcq) Shall Submit The Following Requirements Within Five (5) Calendar Days From Receipt Of Notice From The Prmd. Failure To Submit The Requirements Within The Period Prescribed Shall Result In The Non-compliance Of The Supplier’s Quotation/proposal. A. Legal Documents: A.1 Philippine Government Electronic Procurement System (philgeps) Registration Number; A.2 Valid Mayor’s/business Permit; And A.3 Supplier's Notarized Omnibus Sworn Statement (use Gppb Prescribed Form As Per Gppb Resolution No. 16-2020) Together With The Notarized Proof Of Authorization (e.g., Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney). Notes: I. If Bidding As A Joint Venture (jv), All Partners Must Submit The Above Documents; Ii. In Lieu Of The Mayor’s Permit And Philgeps Registration Number, The Philgeps Certificate Of Platinum Membership, Including Annex A, May Be Submitted, Provided That The Details Of The Mayor’s Permit Under Annex A Must Be Valid As Of Bidding Date; And Iii. For Individuals Engaged Under 53.9 Of The 2016 Revised Irr, Only The Bir Certificate Of Registration Shall Be Submitted In Lieu Of Dti Registration And Mayor’s Permit. B. Financial Document: Y2022 Income Return (itr)/business Tax Return For The Quarter Ending 31 December 2023 Duly Filed Thru Electronic Filing And Payment System (efps) Of Thebir, As Provided For Under E.o. 398 Or Rr 3-2005, Together With The Filing And Payment References References (disregard If You Have Already Submitted/updated The Same); And C. Technical Documents: C.1 Valid Notarized Jv Agreement (jva), If Applicable; C.2 Bsp Terms And Conditions Duly Signed By The Supplier’s Authorized Representative On The Conforme Page. C.3 Bsp Terms Of Reference Duly Signed By The Supplier’s Authorized Representative On The Conforme Page; C.4 Bsp Supplied Evaluation Matrix (bspsem) Duly Accomplished By The Supplier’s Authorized Representative: And Notes: I. Bidder Shall Indicate Under Column 2 The Specifications Of Its Actual Offer And Under Column 3, The Documents That Will Support Its Statement In Column 2. Ii. The Bspsem Need Not Be Signed By The Bidder’s Authorized Representative But Must Be Accomplished And Submitted As Per Schedule Indicated Above. C.5 Supplier’s Proof Of Offer Containing All The Technical Information Listed In The Attached Bsp-supplied Evaluation Matrix (bspsem) And Other Relevant Information Necessary For Validation, In Any Of The Following: I. Original Or Copy Of The Printed Product Brochure(s) From The Manufacturer; Or Ii. Printed Product Brochure(s) Downloaded From The Internet With Indication Of Its Source (e.g. Website); Or Iii. Manufacturer’s Catalog Data Of The Materials/equipment To Be Installed With Highlights On The Data Conforming To The Bsp Specifications; C.6 Certification Requirements Stating The Following: I. Bidder’s Statement That It Has An Authorized Technical Support/service Center/branch/partner Distributor In Manila Or Other Cities And Provinces; Ii. Certification From The Manufacturer On The Availability Of Spare Parts And After-sales Services. 5. The Scanned Actual Signature Of The Authorized Representative Of The Prospective Bidder, Cropped And Pasted Handwritten Signatures, Adobe-created Signatures, Unique Figures And Symbols And Stamped Signatures Are Acceptable As E-signatures. Provided, That Original Documents Not Using Digital Signatures Shall Be Transmitted During Contract Execution. However, Text-typing The Name Of The Bidder And/or The Words “sgd. Or Original Signed” And The Like Without Distinctive Features Are Not Acceptable. 6. The Bsp Assumes No Responsibility Whatsoever To Compensate Or Indemnify Any Supplier For Expenses Incurred In The Preparation Of Quotations/proposals. 7. The Bsp Reserves The Right To Reject The Quotations/proposals Or Not Award The Contract And Makes No Assurance That A Contract Shall Be Entered Into As A Result Of This Request. 8. The Bsp May Suspend The Conduct Of Procurement Activities Adversely Affected Or Interrupted By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions At Any Time During The Existence Of Such Calamity, Or Quarantine Or Similar Restrictions, And When It Has Assessed Or Determined That: (a) No Supplier Will Be Able To Submit A Quotation/proposal Or Comply With The Requirements Of The Procurement Rules Due To The Limitations Resulting From The Declaration Of A State Of Calamity, Or Implementation Of A Community Quarantine Or Similar Restrictions; Or (b) Conduct Of Procurement Activities Cannot Be Undertaken Without Endangering The Health And Welfare Of Its Personnel Despite The Work From Home Or Other Alternative Work Arrangements. 9. The Bsp May Cancel Or Terminate The Conduct Of Procurement Activities, For Any Justifiable Reason, Such As But Not Limited To: (a) Physical And Economic Conditions Have Significantly Changed So As To Render The Project No Longer Economically, Financially, Or Technically Feasible, As Determined By The End-user Unit; (b) Project Is No Longer Necessary As Determined By The End-user Unit; (c) Source Of Funds For The Project Has Been Withheld Or Reduced Through No Fault Of The Bsp; Or (d) Brought About By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions (sec. 35.6 Of The 2016 Revised Irr). 10. The Bsp May Declare Failure Of Bidding/procurement Based On Its Assessment And Review Of All Its Planned And Ongoing Procurement Pursuant To Section 1 Of Gppb Resolution No. 09-2020. 11. The Bsp Aims To Ensure That Only Vendors/suppliers With Known Experience And Proven Capability On The Requirements Of The Particular Contract Should Continue To Participate In Bsp Procurement. Hence, In Line With Section 9(e) Of The 2016 Revised Irr Of R.a. No. 9184, The Bsp Evaluates The Performance Of Suppliers/vendors By Rating The Supplier’s Responsiveness To Bsp Specifications/terms Of Reference, Promptness Of Delivery, Quality Of Goods/services, And Offer’s Value For Money. Sgd Leidy Zara Myeth B. Loreto Manager Attachments: Bsp Quotation/proposal Form Bsp Terms And Conditions Bsp Terms Of Reference Bsp Supplied Evaluation Matrix Bid Cost Sheet Omnibus Sworn Statement Corporate Secretary’s Certificate/special Power Of Attorney

Details: This Is Not A Solicitation Announcement this Is A Request For Information Notice Of Intent To Sole Source this Request For Information (rfi) Is Intended For Information And Planning Purposes Only At This Time; And Shall Not Be Construed As A Solicitation Or As An Obligation On The Part Of The Department Of Veterans Affairs. Because This Is A Request For Information Announcement, No Evaluation Letters And/or Results Will Be Issued To The Respondents. This Sources Sought Notice Is For Market Research Purposes Only And Shall Not Be Considered An Invitation For Bids, Request For Quotations, Or A Request For Proposal. Do Not Submit A Proposal Or Quote. This Market Research Is Issued For Information And Planning Purposes Only And Does Not Constitute A Solicitation Nor Does It Restrict The Government As To The Ultimate Acquisition Approach. Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Additionally, There Is No Obligation On The Part Of The Government To Acquire Any Products Or Services Described In This Notice Of Intent To Sole Source. You Will Not Be Entitled To Payment For Direct Or Indirect Costs That You Incur In Responding To This Sources Sought Notice. Any Contract That Might Be Awarded Based On Information Received Or Derived From This Market Research Will Be The Outcome Of A Competitive Process. Interested Parties Are Responsible For Adequately Marking Proprietary, Restricted Or Competition Sensitive Information Contained In Their Response. No Solicitation Exists. Therefore, Do Not Request A Copy Of A Solicitation. statement Of Need for Bioness Integrated Therapy System Upgrade At department Of Veterans Affairs wilmington Va Medical Center 1. Introduction/background: 1.1. The Wilmington Va Medical Center (wilmington Vamc) Currently Has A New Requirement For Upgrading The Current Bits (bioness Integrated Therapy System) From That Of 2.0 To 3.0. This Will Increase Our Current Bioness Integrated Therapy System (bits ) Software Application From Five (5) Different Therapy Categories To Seven (7) And From 24 Customizable Programs To 68 All Designed To Evaluate And Improve Abilities In Individuals With Disabilities Resulting From Traumatic Injuries And Movement Disorders As Well As Improve Performance In Competitive Athletes. Several Bits Programs Require Visual Scanning To Enhance Detection Of Targets In Complex Arrays And In The Central And Peripheral Fields Of Vision. The Upgrade Package Comes With Hardware To Further Enhance The Ability To Test And Treat Balance Deficits. The Hardware Includes: 2 Sensors, 5 Chest Straps, A Motion Sensor And Balance Platform. 1.2. Minimizing Risk Of Patient Falls Can Save A Substantial Amount In Costs And Improve The Standard Of Care. The Bits Can Accomplish More With A Single Session And Demonstrate Outcomes Over Time And Can Help Patients Combine Balance With Cognitive Tasks To Challenge Both Static And Dynamic Balance Control. Bits Versatility Also Allows Clinicians To Track Patient S Movements During Balance Exercises Using A Body Worn Motion Sensor Or Balance Platform That Detects Posterior, Anterior, And Lateral Movements. Personalize And Configure Balance Training Sessions For Patients At Every Level Of Mobility Throughout Their Rehabilitation. 2. Scope: 2.1. The Department Of Veterans Affairs, Wilmington Va Medical Center Hereby Referred To As Wvamc Is Seeking The New Acquisition As An Addition To Our Currently Owned Equipment Of Brand Name Only Bioness Integrated Therapy System. 2.2. This Need For This Acquisition Is Determined To Be Routine And Can Be Awarded Within Designated Contracting Timeframes 3. Requirement: 3.1. Salient Characteristics For Brand Name Bits 2.0 To 3.0 Upgrade 3.1.1. Must Be Compatible And Work With Current Bits System That Is Already In Place And In Use. 3.1.2. Be A Portable Unit That Can Be Easily Moved From One Treatment Room To Another. 3.1.3. Increase Current System Capability From 24 Programs To 68 Programs 3.1.4. Increase Current System Capability From 4 Assessments To 10 Assessments To Include: 3.1.4.1. Berg Balance Scale; Romberg Test; Sensory Integration Test; Static Postural Sway; And Dynamic Postural Sway 3.1.5. Include Hardware Accessories Of: 3.1.5.1. Intel Nuc Pc With Faster Processing 3.1.5.2. 2 Sensors That Can Work Either On The Platform Or Be Worn By The Patient And Can Track Movements During Balance Exercises To Include Posterior, Anterior, And Lateral Movements 3.1.5.3. 5 Various Size Chest Straps 3.1.5.4. A Balance Platform 3.1.5.5. Single-use Starter Patches (pack Of 48) 3.1.5.6. Include An Extended 2 Yr Warranty. 4. Information Security: the Vendor Will Not Have Any Access To Sensitive Va Information. The C&a Requirements Do Not Apply, And That A Security Accreditation Package Is Not Required. 5. Delivery: 5.1. Delivery Shall Be Coordinated With The Cor And Or Facility Within 30 Days After Receipt Of Contract. Deliver Equipment To: delivery Needs To Be Made To The Rehabilitation Department At The Dover Cboc dover Va Cboc 655 S. Bay Rd Unit 3c Rm 203 dover, De 19901 5.2. Upon Delivery, The Contractor/vendor Agrees To Work With Facility Personnel In Order To: 5.2.1. Conduct A Joint Inventory Of Goods By Material Number, Quantity, And Serial Number 5.2.2. De-palletize Shipment, Unbox, And Stage Products 5.2.3. Unbox And Assemble 5.2.4. Dispose Of Waste Packaging 5.2.5. Register Device Warranty If Required 5.2.6. Perform Ground Continuity Checks, Leakage Current, And Power-on Tests As Required. 5.2.7. Affix Customer Provided Asset Tags If Required 5.2.8. Perform Device In-service 5.3. The Government And The Contractor Understand And Agree That The Services To Be Delivered Under This Contract By The Contractor To The Government Are Non-personal Services And The Parties Recognize And Agree That No Employer-employee Or Master-servant Relationships Exist Or Will Exist Under The Contract Between The Government And The Contractor S Employees. instructions the Information Identified Above Is Intended To Be Descriptive, Of The Brand Name Only Bioness Bit-3155 Bits Balance Upgrade, With The Bits 2-year Extended Warranty, Are To Indicate The Quality Of The Supplies/services That Will Be Satisfactory. It Is The Responsibility Of The Interested Source To Demonstrate To The Government That The Interested Parties Can Provide The Supplies/services That Fulfill The Required Specifications Mentioned Above. responses To This Rfi Should Include Company Name, Address, Point Of Contact, Phone Number, And Point Of Contact E-mail, Duns Number, Cage Code, Size Of Business Pursuant To North American Industrial Classification System (naics) 334510. please Answer The Following Questions: (1) Please Indicate The Size Status And Representations Of Your Business, Such As But Not Limited To: Service-disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc.)? (2) Is Your Company Considered Small Under The Naics Code Identified Under This Rfi? (3) Are You The Manufacturer, Distributor, Or An Equivalent Solution To The Items Being Referenced Above? (4) If You Are A Large Business, Do You Have Any Designated Distributors? If So, Please Provide Their Company Name, Telephone, Point Of Contact And Size Status (if Available). (5) Describe How Your Small Business Takes Ownership Of The Equipment In The Manufacturing, Assembly, Or Delivery Process. (6) If You Re A Small Business And You Are An Authorized Distributor/reseller For The Items Identified Above Or An Equivalent Solution, Do You Alter; Assemble; Modify; The Items Requested In Any Way? If You Do, State How And What Is Altered; Assembled; Modified? (7) If You Intend To Subcontract Any Work On This Contract, What Portion Of The Total Cost Will Be Self-performed/will Be Performed By Your Organization? Please Provide Estimated Detailed Percentage Breakdowns Related To Subcontracted Work And Completion Of Job. (8) Does Your Company Have An Fss Contract With Gsa Or The Nac Or Are You A Contract Holder With Any Other Federal Contract? If So, Please Provide The Contract Number. (9) If You Are An Fss Gsa/nac Contract Holder Or Other Federal Contract Holder, Are The Items/solution You Are Providing Information For Available On Your Schedule/contract? (10) General Pricing Of Your Products/solution Is Encouraged. Pricing Will Be Used For The Purpose Of Market Research Only. It Will Not Be Used To Evaluate For Any Type Of Award. (11) Please Submit Your Capabilities Regarding The Brand Name Equipment. (12) Please Review Salient Characteristics/statement Of Work (if Applicable) And Provide Feedback Or Suggestions. If None, Please Reply As N/a. this Intent To Sole Source Notice Rfi (request For Information) Will Be Conducted In Accordance With Federal Acquisition Regulation (far) Part 13. Responses Must Be Received Via E-mail To Andrew.taylor3@va.gov No Later Than 4 Pm Eastern Standard Time (est) On Thursday, February 5, 2024. This Notice Will Help The Va In Determining Available Potential Sources Only. Reference 36c24423q0635 In The Subject Of The Email Response. do Not Contact Va Medical Center Staff Regarding This Requirement, As They Are Not Authorized To Discuss This Matter Related To This Procurement Action. All Questions Will Be Addressed By The Contracting Specialist, David Santiago. all Firms Responding To This Request For Information Are Advised That Their Response Is Not A Request For Proposal, Therefore Will Not Be Considered For A Contract Award. if A Solicitation Is Issued, Information Will Be Posted On The Beta.sam Web Site For All Qualified Interested Parties At A Later Date And Interested Parties Must Respond To This Intent To Sole Source Notice To Be Considered For A Set-aside. This Notice Does Not Commit The Government To Contract For Any Supplies Or Services. The Government Will Not Pay For Any Information Or Administrative Cost Incurred In Response To This Request For Information. Information Will Only Be Accepted In Writing By E-mail To Contracting Specialist At David.santiago2@va.gov disclaimer this Rfi Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked As Proprietary Will Be Handled Accordingly. Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi. end Of Document

Details: Description 3 Unit Laptop 149,985.00 Technical Specifications 1.processor: A.cpu Architecture Technology: Processor Model Should At Least Be The Latest Release B. Speed Frequency: 2.2 Ghz, Up To 4.6 Ghz C. Cores: 2 10 Cores D. Cache: 2 12mb Lb Cache 2. Operating System: A. Type: Latest Stable Proprietary Os 64~bit B. Version: Professional Version (must Have The Capability To Join Active Directory) C. A Certificate Ofauthenticity (goa) Genuine Label Or Equivalent Ofthe License From The Os Provider Should Be Provided (holographic Image Sticker) 3. Office Productivity Software: A. Type: Latest Stable Proprietary Ops For Corporate Application Perpetual B. Version: Business, Inclusive Ofword Processor, Spreadsheet, Presentation Scamp; Email For Offline Use 4. Memory: 3. Capacity: 28 Gb Ddr4 B. Speed: Ddr4 - 2 3200mhz 5. Keyboard: Built-in 6. Pointing Devices/mouse: A. Type: Touchpad With Multi-gesture And Scrolling Function And Inclusive Of Standard Optical Mouse Usb (mouse Should Be The Same Brand Of The Laptop Being Offered) 7. Graphics Controller: Integrated 8.1/0 Ports: All Ports Should Be Integrated/built-in (no Conversations/extension/adapters Except On Ethernet Lan) A. 2 2 X Usb 3.0 Port B. 1 X Headphone / Microphone Or Combo Jack C. 1 X Rj-45 Lan (conversion Accepted) (i. 1 X Hdmi E. 1 X Type-c Port 9. Display: 39.6 Cm (15.6 & Quot; Diagonal, Fiid (1920 X 1080), Micro-edge, Anti-glare, 250 Nits, 45% N'i‘sc With A Built-in Webcam 10. Hard Drive: 2 512gb Pcie Nvme M2 550 11. Sound Controller: Integrated/buiit-in High Definition Audio System 12. Weight: 2 1.59 Kg. Including Battery 13. Communication: Must Be Integrated / Built- In (no Usb Conversion/extension/adapters) A. Wireless - Integrated Dual Band Wireless - 802.11 Ac/a/b/g/n; Bluetooth 4.0 B. Ethernet - Integrated 10/100/1000 Base-tx 14. Battery: Up To 7 Hours And 45 Minutes 15. Carrying Case: Laptop Bag (same Brand As The Offered) 16. Warranty Scamp; Sla A. Three (3) Years Hardware Warranty B. One (1) Year On Mouse C. Salt; 4 Hours' Response Time For Issues Reported (thru Help Desk) D. A Service Unit Must Be Issued For A Unit That Can't Be Repaired Within The Day E. For Reported Hardware Replacement, The Service Provider Shall Be One To Pull Out The Unit 17. To Protect Dswd From Unreliable And Unproven Products The Following Is Required: A. Proposed Brand Should Be Iso 9000 Certified Or Better B. Proposed Brand Should Be Energy Star Compliant Or Equivalent C. Proposed Brand Should Have An Existing Technical Web Support System Where The Brand Providers/bidders Can Log-in And Key-in Product Service Codes/ Item Codes For Faster Tracking Of Defective / Rma Products And Faster Turn-around Oftechnical Support. D. Proposed Brand Is An International Brand Name, Which Means That The Brand Is Known And Marketed Globally And Has An International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. Further, The Brand Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. E. Manufacturers Offered Model Should Be Available In The Market And Should Not Be Custom-made Or Made To Order Just To Comply With The Specification. 18. Delivery Period: 45 Calendar Days 19. Srp Not More Than: Php 49,995.00 /unit 1 Unit Printer 45,020.00 Technical Specifications Printer Type: Print, Scan, Copy, Fax With Adf Printing: Precision Coretm Printhead 800 X 1 Nozzles Black, 256 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Bi-directional Printing 4800 X 2400 Dpi 3.8 Pl Up To 32.0 Ppm / 22.0 Ppm Simplex: Up To 25.0 Ipm/12.0 Ipm/duplex: Up To 16.0 Ipm / 9.0 Ipm Simplex: Up To 13.5 Ipm / 6.0 Ipm / Duplex: Up To 10.0 Ipm / 5.0 Lprn Simplex: Up To 5.5 Sec / 8.5 / Duplex: Up To 11 Sec/ 17 Sec. Approx. 43 Sec Per Photo (border) / 52 Sec Per Photo (borderless) Esc/p-r, Esc/p Raster Yes (up To A3) Copying: Simplex: Up To 23.0ipm/10.0 Ipm Simplex: Up To 22.5ipm/10.0 Ipm Duplex: Up To 15.5 Ipm / 7.5 Ipm 999 Copies 25-400% 600 X 600 Dpi A3 Scanning: Flatbed Colour Image Scanner C15 1200 X 2400 Dpi 297 X 431.8 (mm) 48-bit Input, 24bit Output 16-bit Input, 8-bit Output 16-bit Input, 1-bit Output Flatbed: 5 Sec / Adf (simplex / Duplex): Up To 26.0 Ipm/11.5 Ipm Flatbed: 10 Sec / Adf (simplex / Duplex): Up To 9.0 Ipm / 6.0 Ipm Adf Function: 64-95 G/m2 50 Sheets Card Slot/ Usb Host Function: Usb Memory Paper Handling: Friction Feed 3 (front 2, Rear 1) Cassette 1: 250 Sheets For A4 Plain Paper (80 G/mz), 50 Sheets For Premium Glossy Photo Paper Cassette 2: 250 Sheets For A4 Plain Paper (80 G/mz) Rear Slot: 50 Sheets For A4 Plain Paper (80 G/mz), 20 Sheets For Premium Glossy Photo Paper 125 Sheets For A4 Plain Paper (80 G/mz), 20 Sheets For Premium Glossy Photo Paper A3, Super B (13 X 19"), Indian Legal, Letter, A4, 16k (195 X 270mm), 8k (270 X 390mm), Executive (7.25 X 10.5") 84, 85, A5, B6, A6, 8.5 X 13", 5 X 7", 4x6", 8x10", Legal (8.5 X 14"), 16.9 Wide, Envelope: #10, Dl, C6, C4 329 X 6000mm 3mm Top, Left, Right, Bottom Via Custom Settings In Printer Driver Fax Function: Walk-up Black-and-white And Colour Fax Capability 6mb, Page Memory Up To 550 Pages Itu-t T.30 Up To 33.6 Kbps, Approx. 3 Sec/page Up To 200 X 200 Dpi A5, A4, A3, Bs, B4, Half Letter, Letter, 11 X 17" A5, A4, A3, B5, B4, Halfletter, Legal, 11 X 17" Half Letter, A5, B5, A4, Letter, Legal, B4, 11x17", A3, A3+ Up To 200 Numbers, 199 Groups Pc Fax (transmission/receive), Automatic Redial, Address Book, Broadcast Fax (mono Only), Transmit Reservation, Polling Reception, Fax Preview, Memory L Reception, Fax To Email, Fax To Folder, Automatic 2- Sided Fax Interface: Usb 2.0 Ethernet, Wi-fi Ieee 802.11b/g/n, Wi~fi Direct Tcp/va4,tcp/1pv6 Snmp, Li'i‘tp, Diicp, Bootp, Apipa, Ping, Ddns, Mdns, Sntp, Slp, Wsd, Lltd I Mobile And Cloud Printing: Epson Iprint, Epson Email Print, Remote Print Driver, Scan To Cloud Apple Aiprint, Mopria Print Service Electrical Specifications: Ac 220-240 V 50-60 Hz 19.0 W 9.1 W 0.8 W 0.2 W Noise Level: Sound Power (black / Colour) 6.7 B(a) / 6.2 B(a), Sound Pressure (black / Colour) 52 Db(a) / 47 Db (a) Consumables: Black Ink Bottle — 008 Cyan Ink Bottle Magenta Ink Bottle Yellow Ink Bottle 1 Unit Desktop 49,995.00 Technical Specification Operating System: Operating System 64-bit Processor & Chipset Processor Type - Core'"i5 Processor Model - Intel® Core" I5-124op Processor Speed - 1.7 Ghz Processor Speed (turbo) - 4.4 Ghz Cache — 12mb Cache Memory: Built-in Memory - 1 Standard Memory- 8 Gb Maximum Memory - Up To 3268 Memory Technology — Ddr4 Sdram Memory Card Reader - No Storage: Number Of Hard Drives - 1 Total Hard Drive Capacity - 1 Tb Total Solid-state Drive Capacity — 256 Gb Solid State Drive Interface - Nvme Ssd Optical Drive Type — No Display 8: Graphics: Screen Size - 60.5 Cm (23.8") Display Screen Technology - Led Touchscreen — No Multi-touch Screen - No Screen Resolution — 1920 X 1080 Graphics Controller Manufacturer - Intel® Graphics Controller Model — Iris X3 Graphics Audio: Speakers - Yes Network & Communication: Wireless Lan — Yes Wireless Lan Standard - Ieee 802.1lax/ac/a/b/g/n Ethernet Technology — Gigabit Ethernet I / O Expansions: Number Ofm.2 Slot - 2 Interfaces/ Ports Hdmi - Yes Usb — Yes Number Of Usb 2.0 Ports — 1 Number Of Usb 3.2 Gen 2 Port — 3 Number Ofusb 3.2 (type-c) Ports - 1 Input Devices: Pointing Device Type - Usb Wired Mouse Keyboard Included — Yes Keyboard Type - Usb Wired Keyboard Software: Featured Software — Ms Office For Home 8: Student Power Description: Power Supply - 65w Physical Characteristics: Height— 51.8 Cm Width — 62.6 Cm Depth 18.6 Cm Warranty: Warranty - 2 Years Warranty

Details: Description Invitation To Bid The Department Of The Interior And Local Government, Regional Office I (dilg Ro I), Through Its Bids And Awards Committee (bac), Invites Prospective Service Providers To Bid For The Hereunder Contract: Bid Number : Pr 2024-07-317 Name Of Project : Procurement Of Brand New Dilg Ro1 Ict Equipment / Office Supplies Under General Management Supervision (gms) Location: Dilg R1 Office, Sevilla, City Of San Fernando, La Union Approved Budget For The Contract (abc): Seven Hundred Fourty-nine Thousand, Eight Hundred Fifty Pesos (php 749,850.00) Delivery Schedule: Within Thirty (30) Calendar Days Upon Approval Of The Contract/upon Receipt Of The Notice To Proceed (ntp) Source Of Funds: Saro No. Sr2024-01-0003 General Management Supervision (gms) Specifications: The Project Has The Following Specifications: Item Specification Abc Per Item Unit 41,000 Brand New 8 Channel Wireless Gooseneck Conference Microphone System (8 Mics And 1 Receiver) • 8 Pcs Wireless Goose-type Wireless Microphones • 1 Pc Receiver System • Maximum Number Of Channels 100*8ch • Transmitting Distance: 100m • 1 Year Warranty On-site On Parts, Labor, And Service • Supplier Shall Respond Within 24 Hours For Technical Assistance/support Center Which Can Provide Response To Technical Issues Via Telephone Call, E-mail Or Site Visit Upon Verbal/written Notification By The End-user Agency • Supplier/manufacturer Should Have An Authorized Service/support Center Nationwide. Brand New 5.5-inch Touch-easy Multi Camera Video Mixer Switcher W/ Ptz Control Chroma Key Abc Per Unit 31,000 • 5.5-inch Full Hd Ips Touchscreen, Provides A Real Picture • Touch Screen Operation, Easy To Use • Real-time 6-picture Preview (4 Inputs Sources + Pst Preview + Pgm Output Picture) • Usb 3.0 Fast To Live Streaming • Ptz Camera Control (up To 8 Cameras) • Input • 4 X Hdmi: Hdmi-a • Output • 1 X Hdmi: Hdmi-a, * 1×usb Typea: Usb 3.0 • Audio In: 1×3.5mm (can Be Connected To Microphone) • Audio Out: 1×3.5mm Stereo Jack • 1 Year Warranty On-site On Parts, Labor, And Service • Supplier Shall Respond Within 24 Hours For Technical Assistance/support Center Which Can Provide Response To Technical Issues Via Telephone Call, E-mail Or Site Visit Upon Verbal/written Notification By The End-user Agency • Supplier/manufacturer Should Have An Authorized Service/support Center Nationwide. Brand New Duplex Sheet-fed Document Scanner Abc Per Unit 28,000.00 ● Adf Capacity: 50 Sheets (80g/m2) ● Daily Duty Cycle: Up To 3,000 Sheets / Day ● Multi-feed Detection: Length Detection ● 2-sided Scan Up To 80 Images Per Minute ● Scanner Type: A4 Sheet-fed, One-pass Duplex Colour Scanner ● Optical Resolution: 600 X 600 Dpi*1 ● Document Scanning Width / Length: Up To 215.9 Mm ● 1 Year Warranty On-site On Parts, Labor, And Service ● Supplier Shall Respond Within 24 Hours For Technical Assistance/support Center Which Can Provide Response To Technical Issues Via Telephone Call, E-mail Or Site Visit Upon Verbal/written Notification By The End-user Agency ● Supplier/manufacturer Should Have An Authorized Service/support Center Nationwide. 4 Brand New Long Range Indoor Access Point Abc Per Unit 8,700.00 ● Range Of 183m (600ft) 802.11ac ● Simultaneous Dual-band ● 2.4ghz Throughput Of 450mbps ● 5ghz Throughput Of 867mbps ● 1 Gigabit Ethernet Port ● Antennas (1) Dual-band Antenna, Tri-polarity, 3 Dbi ● Wi-fi Standards 802.11 A/b/g/n/ac ● 1 Year Warranty On-site On Parts, Labor, And Service ● Supplier Shall Respond Within 24 Hours For Technical Assistance/support Center Which Can Provide Response To Technical Issues Via Telephone Call, E-mail Or Site Visit Upon Verbal/written Notification By The End-user Agency Brand New Outdoor Utp Cable Cat6 • Outdoor Cat6 Utp Cable Blue 305 Meters • Conductor Size: 23awg Or 24 Awg Or Stranding Or Solid Bare Copper • Insulation Material: Pe, Hdpe • Shield: Unshielded Twisted Pairs • Insulation Thickness : 0.2mm Box 2 3,500.00 6 Brand New Continuous Ink Tank Printer Abc Per Unit 8,945.00 • Number Of Paper Trays: 1 • Print Speed Of Up To 9.0 Ipm (black) And 4.8 Ipm (colour) • Ultra-high Page Yield Of 4,500 Pages (black) And 7,500 Pages (colour) • Up To 20 Sheets Of Premium Glossy Photo Paper Paper Sizes: Legal (8.5 X 14), Indian-legal (215 X 345 Mm), 8.5 X 13 • 1 Year Warranty On-site On Parts, Labor, And Service • Supplier Shall Respond Within 24 Hours For Technical Assistance/support Center Which Can Provide Response To Technical Issues Via Telephone Call, E-mail Or Site Visit Upon Verbal/written Notification By The End-user Agency • Supplier/manufacturer Should Have An Authorized Service/support Center Nationwide. 7 Brand New 55” 4k Uhd Tv Abc Per Unit 33,600.00 • Screen Size: 55 Inches • Tv Resolution 4k Ultra Hd • Model Year: 2024 • Hdmi Ports: 3 X Hdmi 2.1 • Usb Ports: 2 Port • Connectivity: Wi-fi And Bluetooth • Refresh Rate: 60hz • 1 Year Warranty On-site On Parts, Labor, And Service • Supplier Shall Respond Within 24 Hours For Technical Assistance/support Center Which Can Provide Response To Technical Issues Via Telephone Call, E-mail Or Site Visit Upon Verbal/written Notification By The End-user Agency • Supplier/manufacturer Should Have An Authorized Service/support Center Nationwide. The Eligibility Check/screening As Well As Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Criteria For The Eligibility Check Of Prospective Bidders, Examination And Evaluation Of Bids And Post-qualification And All Matters Relevant To This Procurement Shall Be In Accordance With Republic Act 9184 (the Government Procurement Reform Act) And Its Revised Implementing Rules And Regulations. Schedule Of Bidding Activities Shall Be As Follows: Activity Requirements Dates/place Posting Of Invitation To Bid To Be Posted In The Philgeps, Dilg Ro1 Website And Conspicuous Place In The Dilg Regional Office For 7 Days August 15 To August 27, 2024 Availability And Issuance Of Bid Documents Payment Of Non-refundable Fee In The Amount Of Php 749.00 Cash, Payable To The Cashier, Dilg Regional Office Or Online Payment Via Lbp Account No.: 0202024270 August 15-16, 2024, At 8:30am-4:00pm August 19-20, 2024, At 8:30am-4:00pm August 22-23, 2024, At 8:30am-4:00pm August 27, 2024, At 8:30am-1:00pm At The Dilg Regional Office 1, City Of San Fernando, La Union Or Prospective Bidders Can Download The E-copy Of The Bidding Document At The Dilg R1 Website @ Https://region1.dilg.gov.ph/index.php/transparency/bid-oppurtunities Or The Philgeps Website Deadline Of Submission Of Bids Bids Must Be Accompanied By A Bid Security In The Form Of Bid Securing Declaration Or Any Of The Following Forms And Amount: (a) The Amount Of Not Less Than Php 14,997.00, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or (b) The Amount Of Not Less Than Php 37,492.00, If Bid Security Is In Surety Bond. Until August 27, 2024, Not Later Than 02:00 Pm At The Dilg R1 Training Hall, City Of San Fernando, La Union Opening Of Bids Bidders Or Representatives May Attend The Activity Physically Or Virtually August 27, 2024, 02:01 Pm At The Dilg R1 Training Hall, City Of San Fernando, La Union Or Zoom Platform Zoom Meeting Login Details Meeting Id: 829 4190 3948 Passcode: Bacmeeting Detailed Bid Evaluation August 27, 2024, 03:00 Pm At The Dilg R1 Training Hall, City Of San Fernando, La Union Or Zoom Platform Zoom Meeting Login Details Meeting Id: 829 4190 3948 Passcode: Bacmeeting Post Qualification The Bac Will Conduct Post-qualification August 29, 2024 Complete Set Of Bid Documents (cd Form) May Be Obtained At The Bids And Awards Committee C/o Bac Secretariat, Dilg Regional Office I, Aguila Road, City Of San Fernando, La Union Or Prospective Bidders May Request A Copy Of The Bid Documents Through Email. Eligibility Requirements And Technical Documents With Tabbing For Each Document (placed In One Folder, Properly Arranged According To The Checklist), And Financial Documents With Tabbing For Each Document (placed In One Folder) Shall Be Placed In A Separate And Marked, Sealed Envelope Addressed To Pedro D. Gonzales, Bac Chairman C/o Bac Secretariat Located At The Dilg Regional Office I, Aguila Road, City Of San Fernando, La Union. For Inquiries, You May Call Telephone Number (072) 888-2289 / 607-4469 Or Send Email To: Dilgr1.bac@gmail.com. The Dilg Ro I Reserve The Right To Reject Any Bids, To Annul The Bidding Process, Which May Be Considered Disadvantageous And Not Beneficial To The Dilg Regional Office Or Waive Any Defect Or Informality Therein. The Dilg Regional Office Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bid Proposals. (sgd) Pedro D. Gonzales Bac Chairperson

Details: Description Invitation To Bid For The Procurement Of Various Supplies And Equipment To Be Distributed To Various Barangays In The City Of Alaminos, Pangasinan 1. The City Government Of Alaminos, Pangasinan Through The Special Purpose Appropriation (aid To Sk Fund) Intends To Apply The Sum Of One Million Five Hundred Twenty-nine Thousand Four Hundred Thirty Pesos (php 1,529,430.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Various Supplies And Equipment To Be Distributed To Various Barangays In The City Of Alaminos, Pangasinan. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Qty. Unit Of Measure Item Description 1 Unit 1.5hp Inverter Acu Includes: 10 Ft Copper Tube Rubber Insulation Communication Wire Flexible Hose Drain Polyethylene Tape Outdoor Bracket 1 Unit 1hp Inverter Acu Includes: 10 Ft Copper Tube Rubber Insulation Communication Wire Flexible Hose Drain Polyethylene Tape Outdoor Bracket 3 Unit 2hp Inverter Acu Includes: 10 Ft Copper Tube Rubber Insulation Communication Wire Flexible Hose Drain Polyethylene Tape Outdoor Bracket 4 Unit 3.5 Cu. Ft. Two-door Personal Ref Description: Key Lock - Side Hard Refrigerator Top Tempered Glass Shelves Stainless Look Door 80w Dimensions: (h:w:d) 85 : 47.5 : 50.5 Cm 1 Set 8-seater Conference Table With Chair Material: Wood, Mahogany 3 Unit All In One Printer Specifications: Printer Type: Print, Scan, Copy Wi-fi & Wi-fi Direct Borderless Printing Up To 4r Printing Technology: Nozzle Configuration: 180 X 1 Nozzles Black, 59 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Maximum Resolution: 5760 X 1440 Dpi Copying: Maximum Copy Resolution: 600 X 600 Dpi Maximum Copy Size: A4, Letter Scanning: Optical Resolution: 1200 X 2400 Dpi Maximum Scan Area: 216 X 297 Mm 4 Unit Dslr Camera Kit Description: 24.1mp Aps-c Cmos Sensor & Digic 4+ Image Processor 9-point Af With 1 Centre Cross-type Af Point Standard Iso 100 - 6400 (expandable To 12800) Wi-fi / Nfc Supported 3 Unit Hot And Cold Water Dispenser Specifications: Top Load Water Dispenser 230v Rated Power: 550w Heating Power: 450w Cooling Current: 1a Refrigerant: R134a (25g) Hot Water: 4l/h (85c) Cold Water: 2l/h (10c) 3 Unit Karaoke Amplifier Description 2ch Speaker With A + B Speakers 2 Mic Inputs With Level & Echo Control Bass, Middle, Treble & Balance Controls 1000w X 2 Max Power 20hz To 20khz Frequency Response 10mv Input Sensitivity Dimensions: (l) 46cm (w) 36cm (h) 14.5cm 3 Unit Karaoke Speaker Description 3-way 5 Speaker System 600w Max Power 12" Speaker Size 89db Sensitivity 8 Ohms Impedance Dimensions: (l) 60.5cm (w) 34cm (h) 36cm 11 Unit Laptop Computer Specifications: Amd Ryzen™ 5 7520u 8gb Lpddr5 Memory 256gb Nvme Ssd 15.6" Hd 1366 X 768 Resolution Intel® Uhd Graphics Windows 11 Home 6 Piece Office Chair Specifications: Thick Ergodynamic Cushion, Grey Fabric Pneumatic Height Function 360 Degrees Swivel Function Chrome Base And Casters With Armrest 1 Piece Office Table With 3 Drawer Specifications: Product Size: H750*w1200*d600mm Material: Cold Rolled Steel Thickness: Steel Cabinet: 0.6mm, Table Top: 250mm Surface: Electrostatic Powder Coating Features: Louvers Includes Name Tag Holders. Lock Includes 1pcs Shelves, 1pcs Hanging Rod, And 1pcs Mirror Per Compartment Powder Spray, Rust Proof And Color Fade Resistance 2 Unit Portable Speaker Specifications: Output Power (w): 240 Dynamic Frequency Response Range (hz): 45 Hz - 20 Khz (-6 Db) Bluetooth Profiles: A2dp 1.3, Avrcp 1.6 Bluetooth Frequency: 2.4 – 2.48ghz Bluetooth Transmitted Modulation: Gfsk Π/4 Dqpsk, 8dpsk Bluetooth Transmitter Power: 15dbm (eirp) Bluetooth Version: 5.1 Charging Time (hrs): 3.5 Maximum Music Playing Time (hrs): 18 Features: Karaoke Function Splashproof 3.5 Mm Audio Cable Input Bluetooth Charging Cable Lightshow Wireless Rechargeable Battery True Wireless 2 Unit Portable Trolley Speaker Specifications: 12" Portable Trolley Speaker With Bluetooth, Nfc, Usb & Sd Slot Fm Radio & Free 2 Wireless Mic With Voice Priority 400 W Rechargeable Battery 1 Unit Smart Pen Specifications: Pen Tip: Soft Pen-tip Button: Screenshot Button, Writing Button Sampling Rate: 240hz, 10ms Latency Pressure Sensitivity: 4096-level Operating Time: 12hrs Continuous Use Weight: 12.7±1g Height: 152mm 1 Piece Wood Shelves 4 Layers, 4 Rows 6 Unit 18-inch Stand Fan Specifications: Blade Size: 18″ Banana Blade Power Input: 65w Lock Type: Clip Type Only 10 Unit Wireless Microphone Description Dual Wireless Vhf Mic Dynamic Capsule 227.25mhz/239.55mhz Fixed Frequency 2 Unit Android Tablet Specifications: Display: 12.1” Lcd 2560 X 1600, 249ppi 12-bit, 68.7 Billion Colors, 600 Nits Brightness Corning® Gorilla® Glass 3 120hz Adaptive Sync Processor: Snapdragon 7s Gen 2/4nm Up To 2.4ghz Rear Camera: 8 Mp Front Camera: 8mp Battery: 10,000mah 33w Fast Charging, Type C 8/256gb 2. The City Government Of Alaminos, Pangasinan Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Thirty (30) Calendar Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Law Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Interested Bidders May Obtain Further Information From The City Government Of Alaminos, Pangasinan And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 1-21, 2024 From The Given Address And Website Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Five Thousand Pesos (php 5,000.00) At The Bac Secretariat, City Engineering Office, City Of Alaminos, Pangasinan. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The City Government Of Alaminos, Pangasinan Will Hold A Pre-bid Conference On October 9, 2024, 10:00 A.m. At The Bac Office, City Hall Building, City Of Alaminos, Pangasinan Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat On Or Before October 21, 2024, 9:30 A.m. At The City Budget Office, City Hall Building, City Of Alaminos, Pangasinan. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Late Bids Shall Not Be Accepted. Bid Opening Shall Be On October 21, 2024, 10:00 A.m. At The Bac Office, City Hall Building, City Of Alaminos, Pangasinan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 8. The City Government Of Alaminos, Pangasinan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra No. 9184 & Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Rolever C. Bernabe / Engr. Wilson C. Rosario Head – Bac Secretariat / Member – Bac Secretariat City General Services Office / City Engineering Office Alaminos City Hall Building Quezon Avenue, Poblacion, City Of Alaminos, Pangasinan (075) 696-1559 / (075)551-3034 Bacseretariat12020@gmail.com Www.alaminoscity.gov.ph Rowena F. Ruiz City Budget Officer Chairperson - Bids And Awards Committee

Details: Description Itb No.028.24- 1 Unit Magnetic Resonance Imaging (mri) Scanner 1  description Of Function Magnetic Resonance Imaging (mri) Scanner Is A Type Of Diagnostic Test That Can Create Detailed Images Of Nearly Every Structure And Organ Inside The Body With Capabilities For Cardiac, Vascular, Brain Head And Neck, Musculoskeletal And Body Imaging Including All Accessories And Peripherals Necessary For These Examination And For The Safety Of All Involved, As Well As The Necessary Capabilities For Storage And Transmittal Of Imaging Data To The Existing Pacs Of The Phc. 2  operational Requirements System Complete With All Accessories As Specified In The Technical Specifications Below. 3  technical Specifications 3.1 Magnet 3.1.1 Mri Scanner: Mr Scanner Design 2018 Or Newer 3.1.2 Field Strength: 1.5 Tesla 3.1.3 Frequency: 60 Mhz Or Higher 3.1.4 Magnet Dimension: 1.62x1.88x2.29 (lxwxh) 3.1.5 Bore Sizes: 70 Cm Or Larger 3.1.6 Magnet Weight (with Cryogen): 2,300 Kg 3.1.7 Minimum Floor Space Requirement: 3.4m X 5.6m 3.1.8 Maximum Fov: 50cm X 50cm X 50cm Or Lager 3.1.9 Homogeneity: ≤ 5ppm For 55cm X 55cm X 50cm 3.1.10 Type Of Shimming: Both Passive And Active Shimming (dynamic) 3.1.11 Patient Specific Shimming: 3d Volume Shim 3.1.12 First Order Shimming: 3x Linear 3.1.13 Magnet Shielding: Active Or Passive Shielding As Needed 3.1.14 External Interference Shielding: Yes 3.1.15 Type Of Cryogen: Liquid Helium 3.1.16 Cryogen Maximum Volume: Less Than 20 Liters Helium 3.1.17 Cryogen Refill: No Refill During The Lifespan Of The Equipment 3.1.18 Vent/ Quench Pipe Requirement: No 3.2 Gradient System 3.2.1 Gradient Type: Solid State 3.2.2 Cooling (coil & Amplifier): Direct Liquid Cooling 3.2.3max. Amplitude For Each Axis: 45 Mt/m 3.2.4 Max. Slew Rate For Each Axis: 200 T/m/s 3.2.5 Max. Fov With Max. Gradient Amplitude: 500 To 550 Mm 3.2.6 Duty Cycle: 100% 3.3 Resolution 3.3.1 Max. Fov: Up To 550 Mm 3.3.2 Min. Fov: 5 Mm 3.3.3 Max. Scan Matrix: 2048 3.3.4 Max. Recon Matrix: 2048 3.3.5 Max. Number Of Slices: 1024 3.3.6 Min. Slice Thickness (2d): 0.1 To 5 Mm 3.3.7 Max. Slice Thickness (2d): 250 To 320 Mm 3.3.8 Min. Slice/partition (3d): 0.05 Mm 3.3.9 Max. Slice/partition Thickness (3d): 64 Mm 3.3.10 Slab Thickness 3d (min): 5 Mm 3.3.11 Slab Thickness 3d (max): 500 Mm 3.4 Radiofrequency System 3.4.1 Rf Transmitter Power: 18kw Or Higher 3.4.2 Number Of Channels: Channel Independent System Or Up To 72 Channels 3.4.3 Signals Chain From Coil To Reconstruction: Fully Digital 3.5 Rf Coil 3.5.1 One (1) Pc Spine Coil: 44 Channels Minimum 3.5.2 One (1) Pc Head And Neck Coil: 20 Channels Minimum 3.5.3 One (1) Pc Body Coil For Abdomen, Pelvis, Cardiac And Prostate Examinations For Adult And Pediatric Patients : 32 Channels Minimum 3.5.4 One (1) Pc Flex Coil Medium: Channels: 6 Minimum 3.5.5 One (1) Pc Flex Coil Small: Channels: 4 Minimum 3.5.6 One (1) Pc Dedicated Knee Coil: Minimum# Of Channels: 16 3.5.7 One (1) Pc Dedicated Breast Coil: Minimum # Of Channels: 7 3.5.8 One (1) Pc Dedicated Shoulder Coil: Minimum # Of Channels: 16 3.6 Patient Table 3.6.1 Horizontal Travel Distance: 175cm Or More 3.6.2 Horizontal Travel Speed: Minimum Of 200 Mm/sec 3.6.3 Max. Weight Capacity: 250 Kg 3.6.4 Minimum Table Height: 59 Cm Or Lower 3.6.5 Iv Pole Integrated: Yes 3.6.6 Auto Sensing Coil Ports: Required 3.6.7 Emergency Switch For Quick Release Of Table Top 3.7 Console /host Computer System And Reconstructor 3.7.1 Processor: Manufacturers Standard 3.7.2 Ram/memory: Manufacturers Standard 3.7.3 System Disk: Manufacturers Standard 3.7.4 Image Database Disk: Manufacturers Standard 3.7.5 Parallel Scanning And Saving Images: Manufacturers Standard 3.7.6 Reconstruction Speed: Manufacturers Standard 3.7.7 Console Display Size: Manufacturers Standard 3.7.8 Resolution: Manufacturers Standard 3.7.9 Integrated Two-way Intercom System And Emergency Stop Button: Required 3.7.10 Cd/dvd Writer : Required 3.7.11 Keyboard And Optical Mouse : Required 3.7.12 Hard Drive Capacity: Manufacturers Standard 3.7.13 Ups: Manufacturers Standard 3.8 Connectivity 3.8.1 Pacs/ris Configuration: Required 3.8.2 Dicom Protocols: Required 3.8.3 Enhanced Multiframe Mr Dicom: Required 3.8.4 Dicom Mr Image Transfer 3.8.4.1 Dicom Workflow Management: Required 3.8.4.2 Dicom Modality Worklist: Required 3.8.4.3 Dicom Modality Performed Procedure Steps: Required 3.8.4.4 Dicom Storage Commitment: Required 3.8.5 Dicom Send/recieve: 3.8.5.1 Dicom Enhanced Mr: Required 3.8.5.2 Export/import Of Dicom Enhance Mr Image: Required 3.8.5.3 Export/import Of Dicom Mr Spectroscopy: Required 3.8.5.4 Export/import Of Dicom Raw: Required 3.8.6 Dicom Mr 3.8.6.1 Export/import Of Dicom Mr Images: Required 3.8.7 Dicom Sc 3.8.7.1 Export/import Of Sc (color) Image Data: Required 3.8.7.2 Dicom Query/retrieve: Required 3.8.8 Dicom Print 3.8.8.1 Grayscale Softcopy Presentation State With Preset Window Settings As On The Console: Required 3.8.8.2 Basic Grayscale Print: Required 3.8.8.3 Dicom Media: Required 3.8.8.4 Mr Studies On Dvd (read/white): Required 3.8.8.5 Ihe Integrated Profiles: Required 3.8.8.6 Schedule Workflow: Required 3.8.8.7 Patient Information Reconciliation: Reqiured 3.8.8.8 Consistent Presentation Of Images: Required 3.8.8.9 Basic Security: Required 3.8.9 Compatible With The Latest Dicom Version: Required 3.8.10 Unlimited Dicom License: Required 3.9 Software And Application 3.9.1 Software For Scanning, Processing And Parameter Editing: Required 3.9.2 Capability To Separate One Patient Folder Into Multiple Studies: Required 3.9.3 Parallel Imaging To Reduce Scan Time: Required 3.9.4 Signal Uniformity Correction: Required 3.9.5 Image Edge Enhancement And Smoothing: Required 3.9.6 High-resolution Acquisitions And Reconstruction (2048 Matrix): Required 3.9.7 Image-based Shimming Method: Required 3.9.8 Synthetic High B-value Dwi: Required 3.9.9 Software To Reduce B0-induced Distortions For Epi Sequence For Brain: Required 3.9.10 Automatic Correction Of Adc Variability For Reproducible Results: Required 3.9.11 Automatic Patient Coaching For Breathing Instructions, Table Movement And Scan Duration: Required 3.9.12 Noise Reduction Software: Required 3.9.13 Automatic Adjustment Of Scan Parameters For Patients With Mr Conditional Implant: Required 3.9.14 Ai Automated Planning For Brain: Required 3.9.15 Ai Automated Planning For Spine: Required 3.9.16 Al Automated Planning For Knee: Required 3.9.17 Al Automated Planning For Shoulder: Required 3.9.18 Metal Artifact Reduction In-plane And Through-plane: Required 3.9.19 Dixon Technique For Gradient Echo Sequences: Required 3.9.20 Whole Body Head-to-toe Imaging: Required 3.9.21 Motion Correction Software: Required 3.9.22 Free Breathing 3d T1 -weighted Imaging For Abdomen: Required 3.9.23 Dixon Technique For Tse/ Fse Sequences: Required 3.9.24 Swi Including Phase Maps: Required 3.9.25 Single And Multi-voxel Spectroscopy Application: Required 3.9.26 Black Blood Prepulse To Suppress Blood Signal: Required 3.9.27 3d Imaging For Spine: Required 3.9.28 3d Imaging For Brachial And Lumbar Plexus With Black Blood Prepulse: Required 3.9.29 Small Fov Dwi: Required 3.9.30 Dti / Fiber Tracking: Required 3.9.31 Cardiac Perfusion And T1 Scout Imaging: Required 3.9.32 T1, T2 And T2* Cardiac Mapping: Required 3.9.33 Non Contrast Coronary Imaging With Respiratory And Cardiac Gating: Required 3.9.34 Parallel Imaging Technique Employing Undersampling Time And Space, Suited For Dynamic And Real-time Cardiac Studies: Required 3.9.35 User Defined T1 Mapping Schemes As Alternative To Native Abd Contrast-enhanced Schemes: Required 3.10 Workstation 3.10.1 5 Sets Monitor For Image Review And Comparison: 27inch Medical Grade Dual Display With Unlimited License 3.10.2 Cpu: Manufacturers Standard 3.10.3 Cpu Memory/ram: Manufacturers Standard 3.10.4 Dicom Capable: Required 3.10.5 Perform Query / Retrieve: Required 3.10.6 Capable Of Mip / Mpr: Required 3.10.7 Neuro Image Processing Like Perfusion, Diffusion, Perfusion Diffusion Mismatch, Dti, Fibertracking, Spectroscopy, Bold: Required 3.10.8 Comprehensive Cardiac Image Processing Including Deep Learning Based Contour Detection: Required 3.10.8.1 Patient Data: Required 3.10.8.2 Series Overview: Required 3.10.8.3 Image Viewer: Required 3.10.8.4 Multimodality Viewer: Required 3.10.8.5 Lv & Rv Function With Lax & Sax: Required 3.10.8.6 2d Flow & Vascular: Required 3.10.8.7 Integrated Reporting Module: Required 3.10.8.8 Tissue Characterization: Required 3.10.8.9 T1 Mapping: Required 3.10.8.10 T2 Mapping: Required 3.10.8.11 Iron Quntification (t2* Mapping): Required 3.10.8.12 Semi-q Perfusion: Required 3.10.8.13 Coronary Imaging: Required 3.10.9 Vascular Image Processing: Required 3.10.1 Prostate Image Processing Including Lesion Segmentation: Required 3.10.11 Stitching/pasting For Spine, Whole Body, Lower Limb Angio Imaging: Required 3.10.12 Multi-parameteric Dynamic Image Processing: Required 3.10.13 Ups For Computer System: Manufacturers Standard 3.10.14 Hard Drive Capacity: Manufacturers Standard 3.11 Standard Pulse Sequences 3.11.1 Gradient Echo: Required 3.11.2 Fast/turbo Gradient Echo: Required 3.11.3 Spoiled Gradient Echo: Required 3.11.4 Dual Echo Fast Gradient Echo: Required 3.11.5 Spin Echo And Fast/turbo Spin Echo: Required 3.11.6 Fast/turbo Spin Echo (single Shot): Required 3.11.7 Fluid Attentuation Inversion Recovery (flair): Required 3.11.8 Echo Planar Imaging (epi): Required 3.11.9 Short T1 Inversion Recovery (stir): Required 3.11.10 Double Inversion Recovery (dir): Required 3.11.11 Triple Inversion Recovery (tir): Required 3.11.12 Fat Water Separation Imaging: Required 3.11.13 2d/3d Tof: Required 3.11.14 2d/3d Pc: Required 3.11.15 Mrcp/mr Urogram: Required 3.11.16 Fast Imaging Employing Steady-state Acquisition: Required 3.11.17 Automated Multi-station Run-off Acquisition: Required 3.11.18 3d Magnetization-prepared, Rapid Gradient-echo: Required 3.11.19 Advance And Latest Acceleration Techniques: Required 3.11.20 Neuro Imaging 3.11.20.1 3d Fse/ Tse Isotropic Imaging For Neuro: Required 3.11.20.2 3d Fse Double Inversion Recovery 3.11.20.3 Non-contrast Cerebral Perfusion Technique Based On Pulsed And Continuous Blood Labeling Technique: Required 3.11.20.4 Susceptibility Artifacts Reduction Diffusion Weighted Imaging: Required 3.11.20.5 Sequence To View Brachial Plexus: Required 3.11.20.6 Motion Correction, Kindly State The Contrast Available For Correction Sequences For Head, Neck, Spine, Axial, Sagittal And Coronal Orientations: Required 3.11.20.7 Fast Suppression With 4 Set Of Images- Inphase, Out Of Phase, Water Only & Fat Only: Required 3.11.20.8 Spectroscopy Single & Multi Voxel, 2d/3d Csi: Required 3.11.20.9 Tractography Or Fiber Tracking: Required 3.11.20.10 Perfusion Study: Required 3.11.20.11 Deep Learning Based Automatic Slice Placement For Various Brain Anatomies: Required 3.11.20.12 Simultaneous Multislice Scan For Diffusion/dti (fast Diffusion With Multiple Slice Acquisition In Single Scan) Based On Compressed Sensing Based: Required 3.11.20.13 Vessel Wall Imaging: Required 3.11.20.14 Tailored 3d Imaging: Required 3.11.20.15 Brain Volume Determination (ie Hippocampus-dementia Protocol): Required 3.11.21 Msk Imaging 3.11.21.1 Fat Suppression With 4 Set Of Images- Inphase, Out Of Phase, Water Only & Fat Only :required 3.11.21.2 Metal Artifact Reduction: Required 3.11.21.3 Metal Artifact Correction: Required 3.11.21.4 Cartilage T2 Assessment Technique With Color Maps: Required 3.11.21.5 3d Fse Isotropic Imaging: Required 3.11.21.6 Motion Correction Sequences For Msk With Axial, Sagittal And Coronal Orientations: Required 3.11.21.7 Compressed Sensing Based Acceleration Technique: Required 3.11.21.8 Tailored 3d Imaging: Required 3.11.21.9 Deep Learning Based Automatic Slice Placement: Required 3.11.21.10 Fracture Imaging: Required 3.11.22 Body Imaging 3.11.22.1 Fat Suppression With 4 Set Of Images- Inphase, Out Of Phase, Water Only & Fat Only :required 3.11.22.2 Liver Fat Quantification Techniques: Required 3.11.22.3 Liver T2 Sequence For Thalassemia/ Iron Quantification: Required 3.11.22.4 Free Breathing Feature Without Respiratory Belt: Required 3.11.22.5 3d Fse/ Tse Isotropic Imaging For Body Imaging: Required 3.11.22.6 Multiphasic Dynamic Liver Acquisition: Required 3.11.22.7 Free Breathing, High Temporal Resolution, Multiphase Dynamic Contrast Enhanced Imaging Using Stack Of Star Technique With Motion Compensation: Required 3.11.22.8 2d Single Shot Fse/tse: Required 3.11.22.9 Compressed Sensing Based Acceleration Technique For Body Imaging: Required 3.11.22.10 Synthetic Dwi Imaging Or Calculated Dwi: Required 3.11.22.11 4d Multiphase Dynamic Contrast Enhanced Imaging: Required 3.11.23 Vascular Imaging 3.11.23.1 Non-contrast 2d Mra (carotid, Popliteal, Femoral: Required 3.11.23.2 Non-contrast Substraction Mr Angio For Peripheral: Required 3.11.23.3 Non-contrast Angio For Renal: Required 3.11.23.4 Non-contrast Angio For Brain: Required 3.11.23.5 Time Resolved Dynamic Mra Angio Technique: Required 3.11.23.6 Bolus Chasing With Automatic Moving Table With Flouro Triggered Mr Angiography: Required 3.11.24 Breast Imaging 3.11.24.1 Bilateral Breast Imaging: Required 3.11.24.2 3d Fse/tse Isotropic Imaging For Breast: Required 3.11.24.3 4d Multiphase Dynamic Contrast Enhanced Imaging: Required 3.11.24.4 Fat Suppression With 4 Set Of Images-inphase, Out Of Phase, Water Only & Fat Only: Required 3.11.24.5 Dynamic T1: Required 3.11.24.6 Silicone Suppression Sequence: Required 3.11.25 Diffusion Imaging 3.11.25.1 Whole Body Diffusion Weighted Imaging: Required 3.11.25.2 Fse Based Diffusion To Reduce Susceptibility Artifacts: Required 3.11.25.3 Synthetic Or Calculated Diffusion To Offer Higher B Value Like 2000+: Required 3.11.25.4 Multi Shot Diffusion: Required 3.11.25.5 2d Selected Rf Excitation - High Resolution & Small Field Of View Diffusion For All Anatomies: Required 3.11.26 Cardiac Imaging 3.11.26.1 3d Heart Coverage For Coronary Artery Imaging Or Cardiac Chamber Imaging: Required 3.11.26.2 Black Blood Single Shot Fse: Required 3.11.26.3 Single-shot Myocardial Delayed Enhancement: Required 3.11.26.4 Phase Sensitive Myocardial Delayed Sequence: Required 3.11.26.5 Myocardial Delayed Enhancement: Required 3.11.26.6 Iron Quantification: Required 3.11.26.7 Phase Contrast Imaging: Required 3.11.26.8 Cine Ir/ti Scout: Required 3.11.26.9 Fiesta Cine/ Truefisp Cine: Required 3.11.26.10 Cardiac Perfusion: Required 3.11.26.11 Cardiac Mapping " T1 & T2: Required 3.11.26.12 Coronary Imaging: Required 3.11.27 Other Scan Parameters 3.11.27.1 Cardiac Trigger With Victor Gating Technology Including One Set Of Patient Lead Wires And One Fiber Optic Peripheral Gating Probe: Required 3.11.27.2 Respiratory Trigger / Gating / Compensation: Required 3.11.27.3 Phase Over Sampling, No Phase Wrap Or Equivalent: Required 3.12 Mri Cooling/chiller System 3.12.1 Appropriate Compatible Chiller: Auto-start / Resume Mechanism 3.12.2 Can Be Operated For 24 Hours/day With 2 Units Of Water Chiller, One Standard And Second For Backup: Required 3.12.3 One (1) Unit Uninterrupted Power Supply (ups): Required 3.13 Air-conditioning System 3.13.1 Two (2) Units Appropriate Air Conditioning System For The Magnet Room/ Scanning Room: Required 3.13.2 One (1) Unit Appropriate Air Conditioning System For The Equipment/ Technical Room: Required 3.13.3 One (1) Unit Appropriate Air Conditioning System For The Control Room: Required 3.13.4 One (1) Unit Appropriate Air Conditioning System For The Reading Room: Required 3.14 Mri Room Preparation 3.14.1 Rf Shielding For The Mr Room: Required 3.14.2 Appropriate Interior To Be Prepared For The Mri Scan Room: Required 3.14.3 Skylight To Be Provided: Required 3.14.4 Installation Of Air-conditioning Units: Required 3.14.5 Construction/ Renovation Of The Control Room: Required 3.14.6 Site Preparation: Required 4  system Configuration Accessories, Spares And Consumables Mr Compatible Accessories 4.1 One (1) Mr Compatible Patient Trolley 4.2 One (1) Flexible Patient Transfer Board 4.3 Music System For Patient 4.4 Disposable Ear Plugs (1000 Pcs) 4.5 Disposable Headset Covers (1000 Pcs) 4.6 Two (2) Mr Compatible Wheelchair 4.7 Two (2) Units Mr Compatible Cctv System For Patient Observation: 4.7.1 Resolution 4k High Resolution Cameras With Digital Zoom And The Ability To Identify People From Up To 80 Feet Away 4.7.2 Video Output Can Produce Higher Quality Videos Of 720p And 1080p 4.7.3 Night Vision Can Capture Color Images At 0.05 Lux Light Conditions And Support At Least 40m At 0 Lux Conditions 4.7.4 Lens Fixed 4mm,f1.2 Lens With A View Angle More Than 89% 4.7.5 Power Camera Should Support Dual Power Such As Poe And External At The Same Time 4.8 One (1) Unit Wall-mounted Mr Compatible Oxygen Monitor For Mr Room 4.9 One (1) Hand-held Metal Detector 4.10 Mri Compatible Dual Head Power Injector 4.11 One (1) Mr Compatible Fire Extinguisher 4.12 Security Straps & Positioning Aids 4.13 One (1) Mr Compatible Iv Stand 4.14 One (1) Secured Mr Coil Cabinet 4.15 Mr Compatible Patient Monitor Which Includes The Following Parameters: Bp, Ecg, Rr And Pulse Oximeter Monitoring Capabilities, Applicable For Adult, Children And Neonates. 4.16 Ten (10) Packs Mri Compatible Ecg Electrodes 4.17 One (1) Unit Laser Printer: 4.17.1 Technology Photothermographic (dry Laser) 4.17.2 Image Quality A. 325 Pixels Per Inch, 78 Inch Micron Laser Spot Spacing B. 14-bit Pixel Depth Architecture 4.17.3 Throughput Up To 40 Films Per Hour, 14x17 In. (35x43 Cm) 4.17.4 Laser Imaging Film A. Blue 7-mil Polyester Base B. Daylight-load Film Cartridges C. 125 Sheets/cartridge D. Printed Film Images With A Standard Dmax Of 3.0 4.18 Mri Compatible Anesthesia Machine : 4.18.1 Two Gases With Low Flow Cascade Tubes For All Gases 4.18.2 Two Position Selectatec Backbar 4.18.3 Sevoflurane Vaporizer 4.18.4 Mechanical Hypoxic Guard 4.18.5 Automatic Compliance And Fresh Gas Compensation To Maintain Accurate Tidal Volumes 4.18.6 Integrated Pneumatically Driven And Microprocessor Controlled Multifunction Ventilator With Colour Touch Screen 4.18.7 Gauss Alarm 4.18.8 Volume, Pressure, Spontaneous, Psv-plus, Pressure With Volume Guarantee,simv, Smmv, Cardiac Bypass 4.18.9 Four Available Waveforms 4.18.10 Minimum 5 Hours Battery Back Up 4.18.11 Variable Orifice Patient Proximal Spirometry 4.18.12 Co2 Absorber Has Ventilator And Bag Mode Switching, On/off Switch And Quick Release Canister 4.19 Five (5) Unit Headset 4.20 Fifty (50) Units Mr Compatible Ecg Leads And Cable For Cardiac Gating 4.21 One (1) Phantom Per Coil (total Of 8 Coils), One (1) Calibration Phantom With Holder, One (1) Acr Phantom With Holder 4.22 Mr Compatible Medicine Trolley 4.23 Mr Compatible Infusion Pump 4.24 Ups For All Imaging Processing Computers With Maintenance Free Batteries For Minimum 1 Hour Back Up 4.25 Wallmounted Mr Compatible Suction System 4.26 Thirty (30) Heavy Duty Clerical Chair: 4.26.1 Material Deluxe Fabric Seat And Backrest 4.26.2 Adjustability Adjustable Armrest, Seat Heights, Seat Depths, Back Heights, Recline Angles, Tilt Locks And Tension Control 4.26.3 Backrest Conform To The Natural Curvature Of The Spine And Provide Adequate Lumbar Support 4.26.4 Weight Capacity Up To 160 Kg Or More 4.26.5 Gas Cylinder Class 4 Gas Lift Can Support Loads Up To 250 Kg 4.26.6 Base Steel Or Nylon Base With Hooded Double Wheel Caster 4.27 Mr Compatible Infant Cradle 5  environmental Factors 5.1  The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0-50deg C And Relative Humidity Of 15-90% 5.2  The Unit Shall Be Capable Of Operating In Ambient Temperature Of 20-30 Deg C And Relative Humidity Of Less Than 70% 5.3  Shall Meet Iec-60601-1-2 :2001(or Equivalent Bis) General Requirements Of Safety For Electromagnetic Compatibility Or Should Comply With 89/366/eec; Emc-directive. 6  power Supply 6.1 Power Input 440-480vac, 60hz Fitted With Phc Electrical Outlet 6.2 Resettable Over-current Breaker Shall Be Fitted For Protection 6.3 Suitable Ups With Maintenance Free Batteries For Minimum One Hour Backup Should Be Supplied With The System 6.4 Step-up And/or Step-down Power Transformer(s) If Required To Be Provided With Appropriate Ratings To Supply Power From The Main Electrical Source To The Mri Scanner. The Supplier Provides The Electrical Connection To The Hospital's Main Power Line.: Required 6.5 One (1) Unit Uninterrupted Power Supply (ups) For Mri Scanner 6.6 One (1) Transient Voltage Surge Suppressor (tvss) With Appropriate Ratings For The Mri Scanner Appropriate Wirings And Circuit Breakers For The Mri Scanner, Chiller And Equipment Room 7  standards, Safety And Training 7.1 Manufactures/supplier Should Have Iso 13485 Certificate To Quality Standard. 7.2 Should Be Ce Or Ul Or Bis Approved Product 7.3 Valid Certificate Of Medical Device Registration From Fda Philippines 7.4 Comprehensive Technical Training For Phc Biomed And User’s Training To Staff For Familiarity With The System. 7.5 Electrical Safety Conforms To Standards For Electrical Safety Iec 60601-1 General Requirements (or Equivalent International/national Standard) 7.6 Comprehensive Warranty On Parts And Service For The Mri System Including Helium And Chiller System: 5 Years 7.7 Preventive Maintenance Every Year: Quarterly For 5 Years 7.8 Regular Calibration Using Phantom: Quarterly For 5 Years 7.9 Warranty For Third Major Party Accessories. Pressure Injector, Patient Monitor, Ups, Chillers, Rf Shielding: 5 Years 7.10 24/7 Fast Response Time Customer Service/ Service Engineers (including Holidays And Weekends) 7.11 Mandatory Software Updates Until The Lifetime Of The Machine Free Of Charge 7.12 Two Weeks International Training Of 2 Radiologist And 2 Radiologic Technologist In A Reputable Training Institution 7.13 Two Weeks Follow-up On-site Training At Least Once A Year Distributed Throughout Warranty Period 8  documentation 8.1  User/technical/maintenance Manuals To Be Supplied In English. 8.2  Certificate Of Calibration And Inspection. 8.3  List Of Important Spare Parts And Accessories With Their Part Number And Costing. 8.4  List Of Equipments Available For Providing Calibration And Routine Maintenance Support As Per Manufacturer Documentation In Service / Technical Manual 8.5 Certification From The Manufacturer That The Model Offered Of The Mri System Is The Latest Model With At Least 2022 Onwards, Unused And Was Not Subjected To Product Recall Duly Notarized. 8.6 Certification From The Manufacturer That The Parts Of The Mri System Are Available For The Next 15 Years After Expiration Of The Warranty Period Duly Notarized. 8.7 Certification From The Manufacturer Duly Notarized That They Have A Local Engineers Trained To Conduct Preventive And Corrective Maintenance Of The Offered Model Mri System. 8.8 Certification From The Manufacturer That The Terms And Conditions Stated In The Contract Shall Be Honored By Them In The Event That A Change Of Exclusive Distributorship Will Occur During The Duration Of The Said Contract Duly Notarized.

Details: Description 3 Unit Laptop 149,985.00 Technical Specifications 1.processor: A.cpu Architecture Technology: Processor Model Should At Least Be The Latest Release B. Speed Frequency: 2.2 Ghz, Up To 4.6 Ghz C. Cores: 2 10 Cores D. Cache: 2 12mb L3 Cache 2. Operating System: A. Type: Latest Stable Proprietary Os 64bit B. Version: Professional Version (must Have The Capability To Join Active Directory) C. A Certificate Of Authenticity (coa) Genuine Label Or Equivalent Ofthe License From The Os Provider Should Be Provided (holographic Image Sticker) 3. Office Productivity Software: A. Type: Latest Stable Proprietary Ops For Corporate Application Perpetual B. Version: Business, Inclusive Of Word Processor, Spreadsheet, Presentation & Email For Offline Use 4. Memory: A. Capacity: 28 Gb Ddr4 B. Speed: Ddr4 - 2 3200mh2 5. Keyboard: Built-in 6. Pointing Devices/mouse: A. Type: Touchpad With Multi—gesture And Scrolling Function And Inclusive Of Standard Optical Mouse Usb (mouse Should Be The Same Brand Ofthe Laptop Being Offered) 7. Graphics Controller: Integrated 8. [/0 Ports: All Ports Should Be Lntegrated/built-in (no Conversations / Extension / Adapters Except On Ethernet Lan) A. 2 2 X Usb 3.0 Port B. 1 X Headphone / Microphone Or Combo Jack C. 1 X Rj-45 Lan (conversion Accepted) D. 1 X Hdmi E. 1 X Type-c Port 9. Display: 39.6 Cm (15.6 8: Quot; Diagonal, Fhd (1920 X 1080), Micro-edge, Anti-glare, 250 Nits, 45% Ntsc With A Built-in Webcam 10. Hard Drive: 2 512gb Pcie Nvme M.2 Ssd 11. Sound Controller: Integrated/built-in High Definition Audio System 12. Weight: 2 1.59 Kg. Including Battery 13. Communication: Must Be Integrated / Built- In (no Usb Conversion/extension/adapters) A. Wireless — Integrated Dual Band Wireless — 802.11 Ac/a/b/g/n; Bluetooth 4.0 B. Ethernet — Integrated 10/100/1000 Base-tx 14. Battery: Up To 7 Hours And 45 Minutes 15. Carrying Case: Laptop Bag (same Brand As The Offered) 16. Warranty 8:amp; Sla A. Three (3) Years Hardware Warranty B. One (1) Year On Mouse C. 8:lt; 4 Hours' Response Time For Issues Reported (thru Help Desk) D. A Service Unit Must Be Issued For A Unit That Can't Be Repaired Within The Day E. For Reported Hardware Replacement, The Service Provider Shall Be One To Pull Out The Unit 17. To Protect Dswd From Unreliable And Unproven Products The Following Is Required: A. Proposed Brand Should Be Iso 9000 Certified Or Better B. Proposed Brand Should Be Energy Star Compliant Or Equivalent C. Proposed Brand Should Have An Existing Technical Web Support System Where The Brand Providers/bidders Can Log-in And Key-in Product Service Codes/ Item Codes For Faster Tracking Of Defective / Rma Products And Faster Turn-around Oftechnical Support D. Proposed Brand Is An International Brand Name, Which Means That The Brand Is Known And Marketed Globally And Has An International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. Further, The Brand Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. E. Manufacturers Offered Model Should Be Available In The Markgtvandshould Not Be Custom-made Or Made To Orderjust To Comply With The Specification. 18. Delivery Period: 45 Calendar Days 19. Srp Not More Than: Flip 49,995.00 /unit 1 Unit Printer 45,020.00 Technical Specifications Printer Type: Print, Scan, Copy, Fax With Adp Printing: Precision Coretm Priiitliead 800 X 1 Nozzles Black, 256 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Bi-directional Printing 4800 X 2400 Dpi 3.8 Pl Up To 32.0 Ppm / 22.0 Ppm Simplex: Up To 25.0 Ipm / 12.0 Ipm/duplex: Up To 16.0 Ipm / 9.0 Ipm Simplex: Up To 13.5 Ipm/6.01pm/ Duplex: Up To 10.0 Ipm / 5.0 Ipm Simplex: Up To 5.5 Sec / 8.5 / Duplex: Up To 11 Sec/ 17 Sec Approx. 43 Sec Per Photo (border) / 52 Sec Per Photo (borderless) Esc/p-r, Esc/p Raster Yes (up To A3) Copying: Simplex: Up To 23.0 Ipm/ 10.0 Ipm Simplex: Up To 22.5 Ipm / 10.0 Ipin Duplex: Up To 15.5 Ipm / 7.5 Ipm 999 Copies 25-400% 600 X 600 Dpi A3 Scanning: Flatbed Colour Image Scanner Cis 1200 X 2400 Dpi 297 X 431.8 (mm) 48-bit Input, 24-bit Output 16-bit Input, 8-bit Output 16-blt Input, 1-bit Output Flatbed: 5 Sec / Adf (simplex/ Duplex): Up To 26.0 Ipm / 11.5 Ipm Flatbed: 10 Sec / Adf (simplex / Duplex): Up To 9.0 Ipm / 6.0 Ipm Adf Function: 64-95 G/m2 50 Sheets Card Slot/ Usb Host Function: Usb Memory Paper Handling: Friction Feed 3 (front 2, Rear 1) Cassette 1: 250 Sheets For A4 Plain Paper (80 G/mz), 50 Sheets For Premium Glossy Photo Paper Cassette 2: 250 Sheets For A4 Plain Paper (80 G/m2) Rear Slot: 50 Sheets For A4 Plain Paper (80 G/m'), 20 Sheets For Premium Glossy Photo Paper 125 Sheets For A4 Plain Paper (80 G/mz), 20 Sheets For Premium Glossy Photo Paper A3, Super B (13 X 19"), Lndian Legal, Letter, A4, 16k (195 X 270mm), 8k (270 X 390mm), Executive (7.25 X 10.5") 84, 05, A5, B6, A6, 8.5 X 13", S X 7", 4x6", 8x10", Legal (8.5 X 14"), 16.9 Wide, Envelope: #10, Dl, C6, C4 329 X 6000mm 3mm Top, Left, Right. Bottom Via Custom Settings In Printer Driver Fax Function: Walk-up Black-and-white And Colour Fax Capability 6mb. Page Memory Up To 550 Pages Ltu-t T.30 Up To 33.6 Kbps, Approx 3 Sec/page Up To 200 X 200 Dpi A5, A4, A3, 85, B4, Halfletter, Letter, 11 X 17" A5, A4, A3, 85, B4, Half Letter, Legal, 11 X 17" Half Letter, A5, 85, A4, Letter, Legal, 84, ‘1 1x17", As, A3+ Up To 200 Numbers, 199 Groups Pc Fax (transmissiou/receive), Automatic Redial, Address Book, Broadcast Fax (mono Only), Transmit Reservation, Polling Reception, Fax Preview, Memory Reception, Fax To Email, Fax To Folder, Automatic 2- Sided Fax Interface: Usb 2.0 Ethernet, Wi-fi [bee 802.11b/g/n, Wi—fi Direct Tcp/ipv4, Tcp/ipv6 Snmp, Http, Dlicp, Bootp, Apipa, Ping, Ddns, Mdns, Sntp, Slp, Wsd, Lltd Mobile And Cloud Printing: Epson Iprint, Epson Email Print, Remote Print Driver, Scan To Cloud Apple Aiprint, Mopria Print Service Electrical Specifications: Ac 220-240 V 50-60 Hz 19.0 W 9.1 W 0.8 W 0.2 W Noise Level: Sound Power (black / Colour) 6.7 8(a) / 6.2 8(a], Sound Pressure (black / Colour) 52 Db(a) / 47 Db (a) Consumables: Black Ink Bottle - 008 Cyan Ink Bottle Magenta Ink Bottle Yellow Ink Bottle 1 Unit Desktop 49,995.00 Technical Specification Operating System: Operating System 64-bit Processor 8: Chipset Processor Type - Coremis Processor Model - Intel® Core‘" I5-1240p Processor Speed - 1.7 Giiz Processor Speed (turbo) - 4.4 Ghz Cache - 12mb Cache Memory: Built-in Memory - 1 Standard Memory - 8 Gb Maximum Memory — Up To 3208 Memory Technology - Ddr4 Sdram Memory Card Reader — No Storage: Number Of Hard Drives - 1 Total Hard Drive Capacity - 1 Tb Total Solid-state Drive Capacity - 256 Gb Solid State Drive Interface - Nvme Ssd Optical Drive Type - No Display 8: Graphics: Screen Size - 60.5 Cm (23.8") Display Screen Technology - Led Touchscreen - No Muiti-touch Screen - No Screen Resolution - 1920 X 1080 Graphics Controller Manufacturer - Intel® Graphics Controller Model - Iris X3 Graphics Audio: Speakers — Yes Network 8: Communication: Wireless Lan - Yes Wireless Lan Standard - Leee 802.11ax/ac/a/b/g/n Ethernet Technology - Gigabit Ethernet [/0 Expansions: Number Of M2 Slot — 2 Interfaces/ports Hdmi - Yes Usb — Yes Number Ofusb 2.0 Ports - 1 Number Ofusb 3.2 Gen 2 Port- 3 Number Of Usb 3.2 (type-c) Ports - 1 Input Devices: Pointing Device Type - Usb Wired Mouse Keyboard Included — Yes Keyboard Type — Usb Wired Keyboard Software: Featured Software — Ms Office For Home 8: Student Power Description: Power Supply - 65w Physical Characteristics: Heiglit- 51.8 Cm Width — 62.6 Cm Depth 18.6 Cm Warranty: (warranty - 2 Years Warranty

Details: Description 1 Pc Fulbrook, P.s. (2020). An Introduction To Learning Theories: 15 Of The Most Influential Learning Theories, Simplified And Explained. Independently Published. Isbn 979-8613005253 1 Pc Mukta, G. (2022). Learner's Psychology. Notion Press. Isbn 979-8887174303 1 Pc Taylor, B. (2020). Design Thinking Plcs: Revolutionize Teacher Collaboration. New School Innovation Consulting Llc. Isbn 978-1952307003 1 Pc Gallagher, A. & Thordarson, K. (2020). Design Thinking In Play: An Action Guide For Educators. Ascd. Isbn 978-1416628859 1 Pc Banks, J.a., & Crocco, M.s. (2021). Transforming Multicultural Education Policy And Practice: Expanding Educational Opportunity (multicultural Education Series). Teachers College Press. Isbn 978-0807766279 1 Pc Hibbert, E., & Hibbert, R. (2023). Multiplying Leaders In Intercultural Contexts: Recognizing And Developing Grassroots Potential. William Carey Publishing. Isbn ‎978-1645084457 1 Pc Wan, E., & Hedinger, M., & Raibley, J. (2023). Transformational Growth: Intercultural Leadership/discipleship/mentorship (relational). Western Academic Publishers. ‎ Isbn 978-1954692183 1 Pc Patent, J.d. (2023). Humanly Possible: A New Model Of Leadership For A More Inclusive World. New Degree Press. Isbn‎ 979-8885044448 1 Pc Lawrence, S.j. (2020). The Layman’s Guide To Understanding Financial Statements: How To Read, Analyze, Create & Understand Balance Sheets, Income Statements, Cash Flow & More. Independently Published. Isbn‎ 979-8691738760 1 Pc Jenkins, N. (2023). The Inclusive Organization: Real Solutions, Impactful Change, And Meaningful Diversity. Wiley. Isbn 978-1119910138 1 Pc Wilkinson, B. (2021). The Diversity Gap: Where Good Intentions Meet True Cultural Change. Harper Collins. Isbn 978-1400226238 1 Pc Wilson, K. (2023). Diversity, Equity, And Inclusion In The Workplace: Developing Dei Solutions. Independently Published. Isbn 979-8378734771 1 Pc "bhargava, R., & Brown, J. (2021). Beyond Diversity: 12 Non-obvious Ways To Build A More Inclusive World. Ideapress Publishing Isbn 978-1646870516" 1 Pc Anand, R. (2021). Leading Global Diversity, Equity, And Inclusion: A Guide For Systemic Change In Multinational Organizations. Berrett-koehler Publishers. Isbn‎ 978-1523000241 1 Pc Symaco, L.p., & Dumanig, F.p. (202). Education And Language In The Philippines. Lexington Books.isbn 978-1793602954 1 Pc Dewitt, P.m. (2020). Instructional Leadership: Creating Practice Out Of Theory. Corwin Isbn 978-1544381411 1 Pc Goodwin, B. (2022). The New Classroom Instruction That Works: The Best Research-based Strategies For Increasing Student Achievement. Ascd. Isbn 978-1416631613 1 Pc Donahue, W.e. (2023). Developing Project Costs And Budgets: A Competency-based Approach That Integrates Financial Management And Budgeting With Management Controls (workbooks For Structured Learning). Independently Published. Isbn 979-837296870 1 Pc Verney, S. (2021). Leadership In Complexity And Change: For A World In Constant Motion (de Gruyter Transformative Thinking And Practice Of Leadership And Its Development, 1). De Gruyter. Isbn 978-3110713060 1 Pc Brag, S.m. (2020). Financial Analysis (4th Ed.). ‎ Accountingtools, Inc. Isbn 978-1642210545 1 Pc Edet, T. (2021). Digital Financial Resources Management. Independently Published. Isbn 979-8710193365 1 Pc Tearle, R. (2020). Organizational Development: How To Choose The Right Intervention (organizational Development Interventions Library). Independently Published. Isbn 979-8666414026 1 Pc Stone, J.c. (2019). The Teaching Of Arithmetic. Wentworth Press. Isbn 978-0526016723 1 Pc Lai, C. (2023). Insights Into Autonomy And Technology In Language Teaching (language Teaching Insights). Castledown Publishers. Isbn 978-1914291111 1 Pc Mendoza, A. (2023). Translanguaging And English As A Lingua Franca In The Plurilingual Classroom (bilingual Education & Bilingualism, 137. Multilingual Matters. Isbn 978-1800413429 1 Pc Aubrey, K., & Alison Riley, A. (2022). Understanding And Using Educational Theories (3rd Ed.). Sage Publications Ltd. Isbn 978-1529761306 1 Pc Nygaard, L.p., & Solli, K. (2021). Strategies For Writing A Thesis By Publication In The Social Sciences And Humanities. Routledge. Isbn 9780367204075 1 Pc Skerry, P.j. (2023). Writing Errors And Their Ways: Correction Strategies For The 21st Century. Rowman & Littlefield Publishers. Isbn 9781475872835 1 Pc Hammond, M. (2022). Writing A Postgraduate Thesis Or Dissertation: Tools For Success. Routledge. Isbn 9780367752828 1 Pc Muijs, D. (2022). Doing Quantitative Research In Education With Ibm Spss Statistics (3rd Ed.). Sage Publications Ltd (uk). Isbn 9781526432681 1 Pc Allen, V. (2020). Behavioural, Emotional And Social Difficulties In School (1st Ed.). Routledge. Isbn 978-0367341831 1 Pc Kvernbekk, T. (2021). The Nature Of Educational Theories: Goal-directed, Equivalence And Interlevel Theories. London: Routledge. 9781138488557 1 Pc Flygare, J., & Hoegh, J.k. (2021). Planning And Teaching In The Standards-based Classroom. Marzano Resources Isbn ‏978-1943360710 1 Pc Orr, D., Luebcke, M., & Schmidt, P.j. (2020). Higher Education Landscape 2030: A Trend Analysis Based On The Ahead International Horizon Scanning (1st Ed.) Springer. Isbn 978-3030448967 1 Pc Mickan, P., & Wallace, I. (2020). The Routledge Handbook Of Language Education Curriculum Design. Routledge. Isbn 9781138958579 1 Pc Ramonyai, J. (2022). Management Methodology: Research Design, Methods, Data Analysis, Questions, Proposal Report Writing, Dm9, Quick Reference Guide Handbook, Education, ... Quantitative, Qualitative, Mixed Methods. Independently Published. Isbn 979-8428625417 1 Pc Humble, S. (2020). Quantitative Analysis Of Questionnaires: Techniques To Explore Structures And Relationships. Routledge. Isbn 978-0367022839 1 Pc "billups, F.d. (2021). Qualitative Data Collection Tools: Design, Development, And Applications. Sage Publications, Inc. Isbn 9781544334820" 1 Pc Klöter, H., And Saarela, M.s. (2020). Language Diversity In The Sinophone World: Historical Trajectories, Language Planning, And Multilingual Practices (routledge Studies In Sociolinguistics). 1st Ed. London: Routledge. Isbn 978-0367504519 1 Pc Stracke, N. (2021). Leadership Skills In An Intercultural Context. Grin Verlag. Isbn 978-3346433787 1 Pc Shapiro, J.p., & Stefkovich, J.a. (2021). Ethical Leadership And Decision Making In Education (5th Ed.). Routledge. Isbn 978-0367901394 1 Pc By, R.t., Burnes, B., & Hughes, M. (2023). Organizational Change, Leadership And Ethics (routledge Studies In Organizational Change & Development) (2nd Ed.). Routledge. Isbn 978-0367477509 1 Pc Kuenkel, P. (2020). Leading Transformative Change Collectively. Routledge. Isbn 978-0367471187 1 Pc Kim, J., &maloney, E.j. (2020). Learning Innovation And The Future Of Higher Education. Johns Hopkins University Press. Isbn 978-1421436630 1 Pc Kolb, L. (2020). Learning First, Technology Second In Practice: New Strategies, Research And Tools For Student Success. International Society For Technology In Education. Isbn 978-1564848383 1 Pc Spring, J. (2021). Today’s Guide To Educational Policy: Pandemics, Disasters, Nationalism, Religion, And Global Politics. London: Routledge. Isbn 9780367740481 1 Pc Milligan, J.a. (2020). Islamic Identity, Postcoloniality, And Educational Policy: Schooling And Ethno-religious Conflict In The Southern Philippines (islam In Southeast Asia) (2nd Ed.). Palgrave Macmillan. Isbn 978-9811512308 1 Pc Curren, R. (2023). Handbook Of Philosophy Of Education. Routledge. Isbn 9781032000039 1 Pc Grillman, B.o., & Borjian, M. (2022). Remaking Multilingualism: A Translanguaging Approach (translanguaging In Theory And Practice, 2). Multilingual Matters. Isbn 978-1800410831 1 Pc Green, A. (2021). Exploring Language Assessment And Testing: Language In Action (2nd Ed.). Routledge. Isbn 9781138388772 1 Pc Fox, J., & Artemeya, N. (2022). Reconsidering Context In Language Assessment: Transdisciplinary Perspectives, Social Theories, And Validity. Routledge. Isbn 9781032244846 1 Pc Hidri, S. (2020). Perspectives On Language Assessment Literacy Challenges For Improved Student Learning. Routledge. Isbn 9780367859695 1 Pc Harris, J.t., Lane, J.e., Sun, J.c., & Baker, G.f. (2020). Academic Leadership And Governance Of Higher Education: A Guide For Trustees, Leaders, And Aspiring Leaders Of Two- And Four-year Institutions. Routledge. Isbn 9781642674095 1 Pc Tamayao, A.i. (2019). Embracing The Teaching Profession. Rex Book Store. 1 Pc Pawilen, G.t. (2019). Teaching Profession Passion And Mission. Rex Book Store. 1 Pc Estrada, J.m. (2023). Code Of Ethics Of Professional Teachers. Rex Book Store. 1 Pc Nash, J.b. (2019). Design Thinking In Schools: A Leader’s Guide To Collaborating For Improvement. Harvard Education Press. Isbn 978-1682534199 1 Pc Wehmeyer, M., & Zhao, Y. (2020). Teaching Students To Become Self-determined Learners. Ascd. Isbn 978-1416628934 1 Pc De Houwer, J. & Hughes, S. (2020). The Psychology Of Learning: An Introduction From A Functional-cognitive Perspective. The Mit Press. Isbn 9780262539234 1 Pc Effrosyni Kostar, E., Gavrielatos, A. (2022). Transformative Learning Theory And Praxis (1st Ed.). Routledge. Isbn‎ 978-1138325043 1 Pc Khoo, J., Sterken, R.k. (2021). The Routledge Handbook Of Social And Political Philosophy Of Language (routledge Handbooks In Philosophy). Routledge. Isbn 9780367759575 1 Pc Wolf, M.p. (2023). Philosophy Of Language: 50 Puzzles, Paradoxes, And Thought Experiments. Routledge. Isbn 9781032023861

Details: W912ee - Proposed Indefinite Delivery Type (idt) Contracts For Three (3) Contracts For Surveying And Mapping Services. Services To Be Performed Primarily Within 3 Usace Districts (memphis, Vicksburg, And New Orleans) That Comprise The Lower Portion Of The Mississippi Valley Division Of The U.s. Army Corps Of Engineers. (restricted To Small Business Firms) this Pre-solicitation Notice Is For Interested Firms To Submit Their Sf 330 By May 2, 2024, 1600 Hours, Cst. Firms Will Be Selected For Negotiations Based On Demonstrated Competence And Qualifications For The Required Work. This Is Not A Request For Proposal. 1. Contract Information: Sf 330s Are Due By Close Of Business On May 2, 2024, 1600 Hours, Cst. Firms Will Be Selected For Negotiation Based On Demonstrated Competence And Qualifications For The Required Work. Three (3) Indefinite Delivery Contracts Will Be Negotiated And Awarded As A Result Of This Solicitation. These Contracts Will Share The $20m Combined Capacity Of The Matoc. Each Contract Will Have A Performance Period Of Five (5) Years From The Date Of Contract Award Or Exhaustion Of The Matoc Capacity Of $20 Million, Whichever Comes First. There Will Be A $1,000 Minimum Guarantee Amount For Each Contract Awarded. the Work Will Be Accomplished Primarily Within The Vicksburg District But May Be Within The Mississippi Valley Division (mvd) And Other Areas As Needed To Support The Mission Of The Us Army Corps Of Engineers. Work Will Be Issued By Negotiated Firm Fixed-price Or Labor-hour Task Orders. It Is Anticipated That The Estimated Workload For Each Year Will Be $2.0 Million. The Cumulative Total Of Task Orders Issued Over The Life Of The Matoc Shall Not Exceed $20.0 Million. Allocation Of Task Orders Will Be Based On Specialized Experience, Past Performance, Project Schedules, And/or Current Workload. contract Award Is Anticipated In November 2024. this Procurement Is Being Offered As A Total Small Business Set-aside, Under Naics Code 541370 – Surveying And Mapping Services. The Small Business Size Standard For Naics Code 541370 Is $19m. 2. Project Information: A-e Service Capabilities Are Required For Various Civil Works Projects And Support For Other Agencies. Work May Be Comprised Of Topographic Surveys, Hydrographic Surveys, Dredge Material Measurement Surveys, Monitoring Surveys, Construction Layout Surveys, Geodetic Control Surveys, Mobile Laser Scanning, Boundary And Cadastral Surveys, Gps Surveying And Mapping. Firms With Demonstrated Specialized Experience, Competence, And Qualifications Pertinent To Survey Engineering, Geodetic Surveying, Land And Boundary Surveying, Hydrographic Surveying, Mapping (microstation, In-roads And Civil3d Capability Required) And Related Services Are Desired For Consideration. The Services Performed Under This Contract May Support The Government Revetment Construction Project Along The Mississippi River Located In The Memphis, Vicksburg, And New Orleans Districts. Work Areas Will Normally Be Within The Boundaries Of The Vicksburg District But May Also Be Used Anywhere Within The Geographical Boundaries Of The Mississippi Valley Division Or Other Missions Of The Vicksburg District Of The U.s. Army Corps Of Engineers. 3. Selection Criteria: Selection Will Be Based On The Following Criteria, Which Are Listed In Descending Order Of Importance. Criteria A Through E Are Primary; Criteria F Is Secondary And Will Only Be Used As A "tie-breaker," If Necessary. (a) Specialized Experience: The Selected Firm Shall Have The Capability To Provide Digital Surveying And Mapping Data In Readable And Fully Operational Format On The District's Computer Aided Design And Drafting (cadd) Or Gis Systems. Data Submission Shall Be Required In Native Microstation (.dgn) Or Autodesk Design Files (.dwg), In-roads (.dtm) Digital Terrain Model Files Or Civil 3d (.tin) Triangulated Irregular Network Files, In-roads Alignment Files (.alg) Or Civil 3d Survey Database Files (.sdbx) And Occasionally In Gis (.shp And Personal Geodatabases) Formats. Firms With Demonstrated Specialized Experience, Competence, And Qualifications Pertinent To Surveying Are Desired For Consideration. Firms Considered To Be Highly Qualified Will Be Required To Furnish At Least Five Fully Equipped Survey Crews With Four-wheel Drive Vehicles And Approved Electronic Total Station Surveying Instruments And Related Equipment. Additional Crews May Be Required. Highly Qualified Firms Shall Be Required To Have Both Code And Carrier Phase L1/l2 Gps Receivers. A Firm Will Be Considered If It Can Demonstrate The Capability To Provide These Personnel And Equipment By Such Means As An Increase In Staffing, Subcontracting, Or Joint Venture. At Least Two, With A Possibility Of Four, Fully Automated Hydrographic Survey Systems (single Fathometer) Operational On A Boat Not Less Than 21 Feet In Length Equipped With Coast Guard Radio Beacon Dgps Shall Be Required In Addition To Ground-based Crews. Each Hydrographic And Topographic Party Provided Shall Have The Capability To Collect And Process Each Survey Performed At The Work Site (plot Cross Sections, Compute Volumes, Revetment Re-designs, Etc.). One Electronic Hydrographic Sweep System (no Booms) On A Boat With A Length No Greater Than 30 Feet (trailerable) With Coast Guard Radio Beacon Dgps Will Be Required Either Through In-house Capabilities Or Subcontracting. Additional Conventional Hydrographic Systems May Also Be Required Where Gps Is Unavailable. Firms Considered To Be Highly Qualified Shall Be Required To Show Specialized Experience In Performing All Types Of Surveys As Stated Above And Subsequent Data Reduction And Plotting Utilizing State-of-the-art Computer Technology. (b) Professional Qualifications: The Prime Firm And/or Its Subcontractor(s) (hereinafter Referred To Collectively As "firm") Must Have Registered Professional Civil Engineers And Land Surveyors On Staff. The Firm Must Have At Least One Professional Land Surveyor Licensed In Each Of The Following States: Mississippi, Louisiana, And Arkansas. The Firm Should Indicate Professional Recognition, Professional Associations, Advanced Training, Certification, And Specific Work Experience Of Key Personnel. The Firm Should Emphasize The Qualifications And Experience Of Its Management Personnel In Survey Engineering, Hydrographic, Topographic And Geodetic Surveying. (c) Past Performance: Performance Evaluations On Previous Contracts With Government Agencies, Including Department Of Defense (dod), And Private Industry In Terms Of Cost Control, Quality Of Work, And Compliance With Performance Schedules Will Be Considered. Additional Consideration Will Also Be Given To Firms That Have Above Average Performance Evaluations In The Type Of Work Described In (a) Above. (d) Capacity: Firms Must Be Able To Provide The Survey Crews And Equipment As Described In The Specialized Experience Paragraph To Be Considered Highly Qualified. Firms Must Demonstrate Sufficient Personnel In The Disciplines Necessary To Conduct The Required Work In An Efficient Manner. (e) Knowledge Of Locality: A Firm's Knowledge Of The Locality Will Be Given Consideration. The Firm Should Demonstrate Its Knowledge Of The Geographical And Topographical Features Of The Area Within The Boundaries Of The Vicksburg District, And Its Familiarity With The Major Rivers And Tributaries Of The Area All As Related To Survey Engineering, Mapping, And Related Services. (f) Volume Of Dod Work: Dod Contract Awards In The Past 12 Months. The Greater The Awards The Lesser The Consideration. In The Final Selection Process, The Most Highly Qualified Firms Will Be Interviewed. 4. Submission Requirements: Interested Firms Having The Capabilities For This Work Must Submit One Electronic Copy Of Sf 330 Along With A Signed Copy Of Part Ii Of Each Sub-consultant’s Sf 330 To: Mvkaecoordinator@usace.army.mil, With Copy Provided To Lawren Boolos At Lawren.boolos@usace.army.mil No Later Than 1600 Hours, Cst, On May 2, 2024. Include Both The Solicitation Number And The Company’s Uei Number On All Submittals. note The Following Restrictions On Submittal Of Sf330; Block E – Resumes Of Key Persons, Specialist And Individual Consultants Anticipated For This Project Will Be Limited To A Maximum Of 20 Pages (one Side). Block H—additional Information Will Be Limited To A Maximum Of 20 Pages (one Side). Pages In Excess Of The Maximum Of 20 Will Be Discarded And Not Used In Evaluation. All Telephone Calls Should Be Directed To Ms. Michelle Moore, (601) 631-5139. appointments Will Not Be Scheduled To Discuss This Announcement. this Is Not A Request For Proposal. A Fee Proposal Will Be Requested At A Later Date. ****note: Contractors Must Be Registered In The System For Award Management (sam), For Information See Http: Www.sam.gov. 5. Inquiries Submission: pre-solicitation Number:w912ee24o0001 all Questions Must Be Submitted Via Projnet. technical Inquiries And Questions Relating To This Solicitation Are To Besubmitted Via Bidder Inquiry In Projnet At (https://www.projnet.org). Bidders Are Encouraged To Submit Questions5 Days Prior Tosf330 Submittalin Order To Ensure Adequate Time Is Allotted To Form An Appropriate Response And Amend The Solicitation, If Necessary. To Submit And Review Inquiry Items, Prospective Vendors Will Need To Use The Bidder Inquiry Key Presented Below And Follow The Instructions Listed Below The Key For Access. A Prospective Vendor Who Submits A Comment /question Will Receive An Acknowledgement Of Their Comment/question Via Email, Followed By An Answer To The Comment/question After It Has Been Processed By Our Technical Team. all Timely Questions And Approved Answers Will Be Made Available Through Projnet. Approved Answers To All Timely Questions Will Also Be Posted On The Fedbizops In The Form Of A Report Generated From Projnet As Soon As The Comment/question Entering Period Is Over And All Answers Are All Finalized. the Pre-solicitation Number Is:w912ee24o0001 the Bidder Inquiry Key Is:z4keni-5ggjuc specific Instructions For Projnet Bid Inquiry Access: 1. From The Projnet Home Page Linked Above, Click On Quick Add On The Upper Right Side Of The Screen. 2. Identify The Agency. This Should Be Marked As Usace. 3. Key. Enter The Bidder Inquiry Key Listed Above. 4. Email. Enter The Email Address You Would Like To Use For Communication. 5. Click Continue. A Page Will Then Open Saying That A User Account Was Not Found And Will Ask You To Create One Using The Provided Form. 6. Enter Your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, And Time Zone. Make Sure To Remember Your Secret Question And Answer As They Will Be Used From This Point On To Access The Projnet System. 7. Click Add User. Once This Is Completed You Are Now Registered Within Projnet And Are Currently Logged Into The System. specific Instructions For Future Projnet Bid Inquiry Access: 1. For Future Access To Projnet, You Will Not Be Emailed Any Type Of Password. You Will Utilize Your Secret Question And Secret Answer To Log In. 2. From The Projnet Home Page Linked Above, Click On Quick Add On The Upper Right Side Of The Screen. 3. Identify The Agency. This Should Be Marked As Usace. 4. Key. Enter The Bidder Inquiry Key Listed Above. 5. Email. Enter The Email Address You Used To Register Previously In Projnet. 6. Click Continue. A Page Will Then Open Asking You To Enter The Answer To Your Secret Question. 7. Enter Your Secret Answer And Click Login. Once This Is Completed You Are Now Logged Into The System.