Pumps Tenders

Details: Tender For Boring, Sinking, Installation And Supplying Of 100 X 50mm Dia Tube Well Assembly having Total Depth Of 93m(approx.) With The Following Operations And Components:-a) Drilling For sinking Of Tubewell Of 100 X 50mm Dia By Water Jet System In All Types Of Soil Including Supply Of T & P and Labour Complete In All Respect. B) Pvc Casing Pipe Isi Marked 100 Mm Dia 80 Schedule 35m Long (oriplast Or Similar Brand).c)100 X 50mm Dia Reducing Socket Of Approved Quality,d) 50mm Dia Isi marked 80 Schedule Pvc Pipe Aprrox. 43m Length,e) Bottom Cutter, F)supply Of Pvc Ribbed Screen stainer Oriplast (50 Mm Dia) Brand Conforming To Is-12818-1997 (50 Mm Dia), G) 1.5h. P. 75 X 40mm submersible Pump Of Cri/comptron Grieves Made With Panel Board & 15m Cable,h) 32 Mm Dia Isi marked Pvc Pipe Of 40m Length As Column Pipe, I) Gravel Packing Around Filter Pipe, J)developement, yeild Test Of Tube Well By Using Air Compressure Till Sand Free Water Is Contained And Submitting bactriological And Chemical Test Report From Approved Laboratory.

Details: Description Procurement Of Backhoe With Transporter Of The Municipality Of Asingan. 1 Unit Backhoe With Transporter Specifications: Engine: 4 Cylinder Displacement: 3.7l Horse Power: 110hp Power Output: 36.8kw/2200rpm Hydraulic System: Type Variable Plunger Pump Max. Discharge Flow: 152l/min Bucket: Bucket Capacity:0.28-0.3m3 Bucket Width:810mm Fuel Tank: 105l Engine Oil: 9.5l Hydraulic Oil Tank: 74l Pre-bid Conference – November 21, 2024 At 9:30 Am At The Bac Office Of The Municipal Hall Of Asingan Submission/receipt/opening Of Bids : December 3, 2024 At 9:30 Am At The Bac Office Of The Municipal Hall Of Asingan Bid Evaluation & Post Qualification – December 5, 2024 Bac Resolution – December 5, 2024 Issuance Of Notice Of Award – December 6, 2024 Approval Of Contract By Higher Authority – December 9, 2024 Issuance Of Notice To Proceed - December 10, 2024 Bid Documents Will Be Available Only To Prospective Bidders Upon Payment Of Non-refundable Amount Of Php 5,000.00 To The Municipal Treasurer’s Office, Asingan, Pangasinan The Municipality Of Asingan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For The Expenses Incurred In The Preparation Of Bids

Details: Description Standard Form Number: Sf-good-60 Revised On: May 24, 2004 Standard Form Title: Request For Quotation Republic Of The Philippines Provincial Government Of South Cotabato Bids And Awards Committee Capitol Compound, Alunan Avenue, City Of Koronadal Tel. No. (083) 228-9951 1. All Entries Must Be Handwritten (legible)/ Typewritten 2. Delivery Period Within 10 Calendar Days Upon Receipt Of The Notice To Proceed Note: Date: Svp 24 - 1306 - A November 26, 2024 Quotation No. Please Quote Your Lowest Price On The Items Listed Below, Subject To The General Conditions Below, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than December 03, 2024 12:00 Noon Provincial Legal Officer Bac Chairman (sgd.) Atty. Marnito B. Cosep 3. Warranty Shall Be For Period Of Three (3) Months For Supplies And Materials, One (1) Year For Equipments, From Date Of Acceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of 120 Days 5. Interested Suppliers Are Required To Submit Their Eligibility Documents Such As Valid And Current Mayor’s Permit/business Permit, Philgeps Registration Number ________, And Income/business Tax Return (for Abcs Above 500k) During The Submission Of Price Quotation. 6. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered (if Applicable) 7. Omnibus Sworn Statement Must Be Submitted During Submission Of Offer/s Or Before Issuance Of Notice Of Award.(for Abcs Above P50k) Note: Suppliers With Updated Eligibility Documents On File At The Bids And Awards Committee, May No Longer Require Its Re-submission. Item No. Item & Description Estimated Unit Of Abc Qty. Unit Of Total Cost Issue Unit Cost 1 Job Order , Provide Labor And Parts For Repair Of 1 Unit Ford Ranger Fx4, 138,000.0 Lot Uv-56, Property No. 410315 Labor: 1) Drain And Replace Engine Oil, 8 Liters 2) Pull Out And Replace Oil Filter 3) Pull Out And Replace Drive Belt 4) Pull Out And Replace Idler 5) Pull Out And Replace Tensioner 6) Pull Out And Replace Timing Belt Cover 7) Pull Out And Replace Timing Belt 8) Pull Out And Replace Timing Belt Tensioner 9) Pull Out And Replace Water Pump Belt 10) Pull Out And Replace Oil Pump 11) Pull Out And Replace Oil Pump Belt 12) Pull Out And Replace Oil Pan 13) Drain And Replace Coolant, 4 Liters 14) Drain And Replace Coolant Reservoir 15) Pull Out And Replace Coolant Cap 16) Pull Out And Replace Return Hose 17) Pull Out And Replace Thermostat Housing With Ect Sensor/valve 1 Brand And Model Delivery Period Warranty Price Validity After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. Printed Name / Signature Tel. No. / Cellphone No. Email Address Date Powered By Ppdo - Itu Powered By Ppdo - Itu Prepared By: 110010003; Pr.no.24 - 1536a Page 1 Of 3 Standard Form Number: Sf-good-60 Revised On: May 24, 2004 Standard Form Title: Request For Quotation Republic Of The Philippines Provincial Government Of South Cotabato Bids And Awards Committee Capitol Compound, Alunan Avenue, City Of Koronadal Tel. No. (083) 228-9951 1. All Entries Must Be Handwritten (legible)/ Typewritten 2. Delivery Period Within 10 Calendar Days Upon Receipt Of The Notice To Proceed Note: Date: Svp 24 - 1306 - A November 26, 2024 Quotation No. Please Quote Your Lowest Price On The Items Listed Below, Subject To The General Conditions Below, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than December 03, 2024 12:00 Noon Provincial Legal Officer Bac Chairman (sgd.) Atty. Marnito B. Cosep 3. Warranty Shall Be For Period Of Three (3) Months For Supplies And Materials, One (1) Year For Equipments, From Date Of Acceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of 120 Days 5. Interested Suppliers Are Required To Submit Their Eligibility Documents Such As Valid And Current Mayor’s Permit/business Permit, Philgeps Registration Number ________, And Income/business Tax Return (for Abcs Above 500k) During The Submission Of Price Quotation. 6. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered (if Applicable) 7. Omnibus Sworn Statement Must Be Submitted During Submission Of Offer/s Or Before Issuance Of Notice Of Award.(for Abcs Above P50k) Note: Suppliers With Updated Eligibility Documents On File At The Bids And Awards Committee, May No Longer Require Its Re-submission. Item No. Item & Description Estimated Unit Of Abc Qty. Unit Of Total Cost Issue Unit Cost 18) Conduct Testing And Commissioning Parts: 1) Drive Belt, 1pc 2) Idler, 1pc 3) Tensioner, 1pc 4) Timing Belt, 1pc 5) Timing Belt Tensioner, 1pc 6) Water Pump Belt, 1pc 7) Timing Cover, 1pc 8) Sealant/sealer, 3pcs 9) Oil Pump Belt, 1pc 10) Crankshaft Bolt, 1pc 11) Bolt M6 X 20 Mm, 11pcs 12) Bolt M12 X 32 Mm 2pcs 13) Stud M6 X 20 M6 X 25, 3pcs 14) Stud M8 X 83 M6 X 18, 1pc 15) Bolt M8 X 15 Mm, Ipc 16) Oil Pan, 1pc 17) Oil Pan Bolt, 16pcs 18) Oil Pump, 1pc Brand And Model Delivery Period Warranty Price Validity After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. Printed Name / Signature Tel. No. / Cellphone No. Email Address Date Powered By Ppdo - Itu Powered By Ppdo - Itu Prepared By: 110010003; Pr.no.24 - 1536a Page 2 Of 3 Standard Form Number: Sf-good-60 Revised On: May 24, 2004 Standard Form Title: Request For Quotation Republic Of The Philippines Provincial Government Of South Cotabato Bids And Awards Committee Capitol Compound, Alunan Avenue, City Of Koronadal Tel. No. (083) 228-9951 1. All Entries Must Be Handwritten (legible)/ Typewritten 2. Delivery Period Within 10 Calendar Days Upon Receipt Of The Notice To Proceed Note: Date: Svp 24 - 1306 - A November 26, 2024 Quotation No. Please Quote Your Lowest Price On The Items Listed Below, Subject To The General Conditions Below, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than December 03, 2024 12:00 Noon Provincial Legal Officer Bac Chairman (sgd.) Atty. Marnito B. Cosep 3. Warranty Shall Be For Period Of Three (3) Months For Supplies And Materials, One (1) Year For Equipments, From Date Of Acceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of 120 Days 5. Interested Suppliers Are Required To Submit Their Eligibility Documents Such As Valid And Current Mayor’s Permit/business Permit, Philgeps Registration Number ________, And Income/business Tax Return (for Abcs Above 500k) During The Submission Of Price Quotation. 6. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered (if Applicable) 7. Omnibus Sworn Statement Must Be Submitted During Submission Of Offer/s Or Before Issuance Of Notice Of Award.(for Abcs Above P50k) Note: Suppliers With Updated Eligibility Documents On File At The Bids And Awards Committee, May No Longer Require Its Re-submission. Item No. Item & Description Estimated Unit Of Abc Qty. Unit Of Total Cost Issue Unit Cost 19) Coolant Reservoir, 1pc 20) Coolant Cap, 1pc 21) Coolant, 4l 22) Return Hose, 1pc 23) Thermostat Housing W/ect Sensor/valve 24) Engine Oil, 8l 25) Oil Filter, 1pc 26) Parts Cleaner, 1pc X-x-x Nothing Follows X-x-x Price: Vat Inclusive Warranty: 6 Months On Labor And Materials Delivery: 30 Days Upon Receipt Of Purchase Order Genuine Ford Parts Note: For Repair Of Peo - Uv-56 Ford Ranger Fx4 Property No. 410315 Source Of Fund: Peo- 8754- 5-02-13-060- Mooe- 24-11-24222 Approved Budget: P 138,000.00 Brand And Model Delivery Period Warranty Price Validity After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. Printed Name / Signature Tel. No. / Cellphone No. Email Address Date Powered By Ppdo - Itu Powered By Ppdo - Itu Prepared By: 110010003; Pr.no.24 - 1536a Page 3 Of 3

Description: CATEGORY: Arduino UNO R3 , Arsuino Nano , Resberry Pi 3 , Aurdino Mega , Breadboards 800points , Breadboards 400points , Berg Strip F,M , Zero PCB , 16x2 LDC Display with I2C module , USB Cables , 9V Battery , Resistors Kit , Capacitors Kit , Linear Voltage Reguiulator set , Water Pump Module , Piezoelectic Plate , 8by8 LED Matrix Module , Bluetooth Module , 7 Segment LED Display , GSM Module , GPS Module , Laser Diode Emitter , LDR Module , Keypad , Joy Stick , Active Buzzer , Motor Driver L298P , Sound Playback Module , ESP 32 , Vibrating Motor , Alligator Coonector , DC Jack Male and Female , RGB LEDs , LEDs red , LEDs green , LEDs blue , LEDs yellow , LEDs white , IC LM555 , Diod and Transistor Kit , Button Switch Set , Touch Module , Battery Clip , IR Sensors , Triple Axis Magnetometer , MQ4 Sensor , MQ5 Sensor , MQ6 Sensor , MQ7 Sensor , MQ8 Sensor , MQ135 Sensor , IR Transmiter and Receiver , Ultrasonic Sensor Module , Triple Axis Accelerometer , Pulse Rate Heart Sensor , Relay 1 Channel module , Relay 2 Channel Module , Sound Module , Soil Moisture Sensor Module , Rain Drop Sensor , Flex Sensor , Temperature and Humidity Sensor Module , Force Pressure Sensor , Colour Recognisation Sensor , Water Flow Sensor , Power Bank Module , PIR Motion Sensor Module , RFID Reader , RF Module , Stepper Motor , DC Motor , Servo Motor Metal Gear 180 , Servo Motor Metal Gear 360 , Small Servo Metal Gear , 4 Wheel Robot Car Chassis Kit , Drone Kit , Bio-Medical Kit , 3D printer , 3D filament 1000gm , Cardboard , Foam Core Boards , Rubberband , Popsicle Stick , Wood Glue 500ml , Hacksaw Frame , Hacksaw Blades , Mini Hacksaw Frame , Mini Hacksaw Blades , Pliers set , Twizer Set , Ball Peen Hammer , Steel Shaft Claw Hammer , C-Clamp , Allen key Set , Drill Machine Set , Workstation For Drilling , Spanner Set , Vice Normal , Precision Screw Driver , Wrench , Wire Stripper , Screwdriver , Cordless Rotary Multitool Set , Air Blower , Drill Bit Set , File Set , Mini File Set , Flexiable Cutting Mat , Plastic Storage Drawer , Pegboard , Hot Glue Gun , Digital Oscilloscope , Soldering Kit , Adapter 5v , Adapter 12v , Electric Screw Driver , Dual Temperature Heat Gun , Soldering helping Hand , Return Measuring tape , Stainless Steel Rule , Digital Vernier Calliper , Spirit Level , Digital Multimeter , Diy Paper Microscope , Telescope , Sewing Kit , Glue Stick , Cable Tie , Power Strip Adapters , Buld Holder , Electric wires 20M , First Aid Kit , Fire Extinguisher , Saftey goggles , Safety Gloves , Safety Mask , Furniture , Chairs , LEH Solar Training Kit , LEH Green House Kit

Description: CATEGORY: Arduino UNO R3 , Arsuino Nano , Resberry Pi 3 , Aurdino Mega , Breadboards 800points , Breadboards 400points , Berg Strip F,M , Zero PCB , 16x2 LDC Display with I2C module , USB Cables , 9V Battery , Resistors Kit , Capacitors Kit , Linear Voltage Reguiulator set , Water Pump Module , Piezoelectic Plate , 8by8 LED Matrix Module , Bluetooth Module , 7 Segment LED Display , GSM Module , GPS Module , Laser Diode Emitter , LDR Module , Keypad , Joy Stick , Active Buzzer , Motor Driver L298P , Sound Playback Module , ESP 32 , Vibrating Motor , Alligator Coonector , DC Jack Male and Female , RGB LEDs , LEDs red , LEDs green , LEDs blue , LEDs yellow , LEDs white , IC LM555 , Diod and Transistor Kit , Button Switch Set , Touch Module , Battery Clip , IR Sensors , Triple Axis Magnetometer , MQ4 Sensor , MQ5 Sensor , MQ6 Sensor , MQ7 Sensor , MQ8 Sensor , MQ135 Sensor , IR Transmiter and Receiver , Ultrasonic Sensor Module , Triple Axis Accelerometer , Pulse Rate Heart Sensor , Relay 1 Channel module , Relay 2 Channel Module , Sound Module , Soil Moisture Sensor Module , Rain Drop Sensor , Flex Sensor , Temperature and Humidity Sensor Module , Force Pressure Sensor , Colour Recognisation Sensor , Water Flow Sensor , Power Bank Module , PIR Motion Sensor Module , RFID Reader , RF Module , Stepper Motor , DC Motor , Servo Motor Metal Gear 180 , Servo Motor Metal Gear 360 , Small Servo Metal Gear , 4 Wheel Robot Car Chassis Kit , Drone Kit , Bio-Medical Kit , 3D printer , 3D filament 1000gm , Cardboard , Foam Core Boards , Rubberband , Popsicle Stick , Wood Glue 500ml , Hacksaw Frame , Hacksaw Blades , Mini Hacksaw Frame , Mini Hacksaw Blades , Pliers set , Twizer Set , Ball Peen Hammer , Steel Shaft Claw Hammer , C-Clamp , Allen key Set , Drill Machine Set , Workstation For Drilling , Spanner Set , Vice Normal , Precision Screw Driver , Wrench , Wire Stripper , Screwdriver , Cordless Rotary Multitool Set , Air Blower , Drill Bit Set , File Set , Mini File Set , Flexiable Cutting Mat , Plastic Storage Drawer , Pegboard , Hot Glue Gun , Digital Oscilloscope , Soldering Kit , Adapter 5v , Adapter 12v , Electric Screw Driver , Dual Temperature Heat Gun , Soldering helping Hand , Return Measuring tape , Stainless Steel Rule , Digital Vernier Calliper , Spirit Level , Digital Multimeter , Diy Paper Microscope , Telescope , Sewing Kit , Glue Stick , Cable Tie , Power Strip Adapters , Buld Holder , Electric wires 20M , First Aid Kit , Fire Extinguisher , Saftey goggles , Safety Gloves , Safety Mask , Furniture , Chairs

Description: CATEGORY: Oil Filter for Genr Set 30 KVA , Diesel Filter for Genr Set 30 KVA , Air Filter Assy for Genr Set 30 KVA , Fuel Filter for Genr Set 30 KVA , Air Breather for Genr Set 30 KVA , Volt Meter for Genr Set 30 KVA , Over Flow Pipe for Genr Set 30 KVA , Fan Belt for Genr Set 30 KVA , Radiator Cap for Genr Set 30 KVA , Solenoid for Genr Set 30 KVA , Fuel Feed Pump for Genr Set 15 KVA , Air Filter for Genr Set 15 KVA , Piston Ring Set for Genr Set 15 KVA , Fuel Filter for Genr Set 15 KVA , Fuel Pipe Line for Genr Set 15 KVA , Push Rod Tube Seal for Genr Set 15 KVA , Tapper Cover Gasket for Genr Set 15 KVA , Bty Terminal for Genr Set 15 KVA , Head Gasket for Genr Set 15 KVA , Air Cleaner Assy for Genr Set 15 KVA , Air Filter Assy for Genr Set 15 KVA , Radiant Fan for Genr Set 15 KVA , Radiator Cap for Genr Set 15 KVA , Oil Filter for Genr Set 7.5 KVA with Portable Tower Light , Diesel Filter for Genr Set 7.5 KVA with Portable Tower Light , Air Filter Assy for Genr Set 7.5 KVA with Portable Tower Light , Fuel Filter for Genr Set 7.5 KVA with Portable Tower Light , Tubelight LED with complete fitting , Flexible Wire copper conductor , Service Cable , Bulb 15 W , Halogen Bulb , CGI Sheet 1800 x 1800 x 0.63mm , Paint Black , Paint OG , Paint White , Ceiling Fan 1200 mm sweep , Oil Filter for Portable Tower Light , Air Filter Assy for Portable Tower Light , Diesel Filter for Portable Tower Light , Benzo Washer 17 oblique 19 No for Portable Tower Light , Benzo Bolt 17 oblique 19 No for Portable Tower Light , Fuel Filter for Portable Tower Light , Overhaul of Genr Set of Portable Tower Light , Aluminium Window , MS Steel Window Jail Type , Aluminium Door with ACP Sheet , MS Steel Door Jail Type , Ceiling Tiles 2 feet x 2feet , Main Angle for Ceiling , Ceiling T 4 Feet long , Wall Angle for Ceiling , Ceiling T 2 Feet Long , Wire for Ceiling , Black Screw for Ceiling 3 oblique 4 ench , PVC Insulated Cable Elect 1.5 Sqmm , PVC Insulated Cable1 Sqmm Single Core , Switch socket combination 15 oblique 16 AMP , Socket 5 oblique 6 AMP 5 Pin , PVC Door for Bathroom , Wash Hand Basin , Pillar Cock for Wash Basin , Switch Board 8 ench x10 ench , Bath Cabinet , Corner Shelf , CP Bib Cock 15mm , EWC , Flushing Cistern 10 ltr , EWC Seat Cover , Jet Spray , PVC Connection 600mm long , Shower Rose , GI Pipe 15mm , GI Pipe 20mm

Description: CATEGORY: Tata Safari,Part No.272425200184,Clutch Disc 240 Dia , Tata Safari,Part No.272425400157,Assy 240 Dia Clutch Cover , Tata Safari,Part No.272425600246,Clutch Release Bearing , Tata Safari,Part No.278950500101,Assy Fan Shroud , Tata Safari,Part No.269942700124,Assy Parking Brake Cable Front , Tata Safari,Part No.288842700107,Assy Parking Brake Cable Rear LH , Tata Safari,Part No.288842700108,Assy Parking Brake Cable Rear RH , Tata Safari,Part No.288842103704,Brake Disc , Tata Safari,Part No.269932600119,Off Drg Assy Rear Shock Abs With Rb Stop , Tata Safari,Part No.269972300127,Latch FR DR RH Micro , Tata Safari,Part No.G269974506302,Mould Tailgate Primary , Tata Safari,Part No.269946600284,Assy Power Stg Pump , Tata Safari,Part No.253409110117,Assy Fuel Filter , Tata Safari,Part No.288788500112,Assy Front Bumper , Tata Safari,Part No.288847600102,Assy Fuel Line Complt On Engine , Tata Safari,Part No.288881100104,Assy RVM Ext RH RHD , Tata Safari,Part No.288881100105,Assy Rvm Ext LH RHD , Tata Safari,Part No.278950105801,Rubber Hose Upper Cooling Pipe To Radiator , Tata Safari,Part No.G269972506326,Glass Run Front Mould RH , Tata Safari,Part No.G269972506325,Glass Run Front Mould LH , Tata Safari,Part No.288772502302,Glass Front Door Winding RH Double Lift N , Tata Safari,Part No.288772502301,Glass Front Door Winding LH Double Lift N , Tata Safari,Part No.G269972506322,Outer Belt Fr Mould RH , Tata Safari,Part No.G269972506321,Outer Belt Fr Mould LH , Tata Safari,Part No.G269972506320,Inner Belt Front Mould RH , Tata Safari,Part No.G269972506319,Inner Belt Front Mould LH , Tata Safari,Part No.G269973506311,Mould Rear Door Primary , Tata Safari,Part No.G269973506312,Prim.SMD. RR DR. R , Tata Safari,Part No.269973706313,Plastic Membrane Rear Door L.H. , Tata Safari,Part No.269973706312,Plastic Membrane Rear Door R.H. , Tata Safari,Part No.279709110103,Assy.Sedimentor Delphi , Tata Safari,Part No.278909130106,Air Filter Element Mahle , Tata Safari,Part No.278918130104,Assy. Oil Filter Fleetguard , Tata Safari,Part No.287042100110,Kit Pad Assy.With Packing , Tata Safari,Part No.885527891402,Kit EGR Cooler Strome , Tata Safari,Part No.278909110121,Assy Fuel Filter W Plastic Bkt Delhphi , Tata Safari,Part No.278909110143,Assy Pre Filter Bkt 2 Pin Connection , Tata Safari,Part No.287042300163,Kit Lined Shoe , Tata Safari,Part No.540732600106,Rear Shock Absorber Assy , Tata Safari,Part No.287042100120,Kit Pad Assy With Clip On Shim

Details: Description Republic Of The Philippines University Of Northern Philippines Tamag, Vigan City Invitation To Bid For The Procurement Of Construction Supplies And Materials 1. The University Of Northern Philippines, Through The Use Of Income, 2024 Intends To Apply The Sum Of ₱ 1,320,323.00 The Abc To Payments Under The Contract For The Procurement Of Construction Supplies And Materials/g-2024-41. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The University Of Northern Philippines Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within 20 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From University Of Northern Philippines And Inspect The Bidding Documents At The Address Given Below During 8:00 Am – 12:00 Pm And 1:00-5:00 Pm, From Monday To Friday Except Non-working Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21 – December 11, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee To The Cashier’s Office For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (₱ 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The University Of Northern Philippines Will Hold A Pre-bid Conference On November 29, 2024, 9:00 Am At Bac Meeting Room, 2/f Roco Lina Building, University Of Northern Philippines, Tamag, Vigan City, Ilocos Sur And/or Through Video Conferencing Or Webcasting Via Google Meet (https://meet.google.com/jxm-txqj-xov) Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through: (i) Manual Submission At The Office Address Indicated Below On Or Before December 11, 2024, 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 11, 2024, 9:00 Am At The Given Address Below And/or Via Google Meet (https://meet.google.com/jxm-txqj-xov). Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The University Of Northern Philippines Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Dr. Fatima F. Rocamora/dr. Frances R. Duldulao University Of Northern Philippines Tamag, Vigan City, Ilocos Sur 2700 Bac@unp.edu.ph (077) 632-6895 Www.unp.edu.ph You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph November 20, 2024 Fatima F. Rocamora, Edd Bac Chairperson Procurement Of Construction Supplies & Materials Abc: ₱ 1,320,323.00 Lot No. Item No. Unit Item Description Qty Abc Lot 1 --supplies And Materials For The Building & Water Maintenance Unit (pr #2024-10-14-806) Use Of Income--abc: ₱ 1,320,323.00 1. Kilo Tie Wire #16 -40- 2. Pc Marine Plywood 3/4", Good Quality -180- 3. Pc Marine Plywood 1/2", Good Quality -30- 4. Pc Marine Plywood 1/4", Good Quality -200- 5. Pc Ecolumber 2 X 2 X 12 -180- 6. Pc Ecolumber 2 X 3 X 12 -180- 7. Pc Ecolumber 2 X 4 X 12 -60- 8. Pc Ecolumber 2 X 6 X 12 -40- 9. Kilo Common Wire Nail 2" -50- 10. Kilo Common Wire Nail 1" -25- 11. Kilo Finishing Nail 2" -25- 12. Pair Loose Pin Hinges 3 X 3 -20- 13. Pc Drawer Puller 4", Stainless Type, Heavy Duty -50- 14. Pc Magnetic Catches, Heavy Duty -50- 15. Set Door Knobs, Lever Lock, Heavy Duty -100- 16. Tin Paint, Flat Wall Enamel -5- 17. Tin Paint, Quick Drying Enamel -5- 18. Liter Plasolux Glazing Putty -20- 19. Liter Polytuff With Hardener -45- 20. Feet Sandpaper #80, High Quality, Red Surface -50- 21. Gal Paint Thinner -20- 22. Liter Wood Glue -10- 23. Pc Paint Brush 1", Good Quality -30- 24. Pc Paint Brush 2", Good Quality -30- 25. Pc Piano Hinges With Screw -20- 26. Pc Oil Tinting Color, 1/4 Liter, Assorted -10- 27. Liter Latex Color Paint, Assorted -10- 28. Liter Elastomeric All Purpose Sealant, Wet And Dry -25- 29. Pc Triangular Pile -6- 30. Pc Diamond Cutter Blade 4" -2- 31. Pc Flap Disc 4" -15- 32. Pair Carbon Brass -10- 33. Pc Circular Saw Blade, Heavy Duty 7 1/4" -2- 34. Pc Circular Saw Blade, Heavy Duty 9 1/4" -2- 35. Pair Hand Gloves With Rubber Palm -30- 36. Pc Hacksaw Blade 24tpi -10- 37. Pc Metal Drill Bit (5/32, 3/16, 1/4, 1/2) -20- 38. Pc Tekscrew Adapter -10- 39. Pc Measuring Tape, 10m, Heavy Duty -1- 40. Pc Cut-off Blade 14" -10- 41. Pc Dyna Bolt 3/8 -20- 42. Pc Dyna Bolt 1/2 -10- 43. Pc Dyna Bolt 5/8 -10- 44. Pc Wooden Tekscrew 2" -1000- 45. Pc Wooden Tekscrew 3" -1000- 46. Pc Ppr Pipe 2”, Pn20 -5- 47. Pc Ppr Pine 1 1/4", Pn20 -5- 48. Pc Ppr Pine 3/4", Pn20 -10- 49. Pc Siamese Valve, 3" X 2 1/2 X 2 1/2 -2- 50. Pc Ppr Ball Valve With Union Patente 1 1/4" -2- 51. Pc Ppr Ball Valve With Union Patente 1" -5- 52. Pc Ppr Elbow Plain 1 1/4" -10- 53. Pc Ppr Elbow Plain 1" -20- 54. Pc Ppr Elbow Plain 3/4" -100- 55. Pc Ppr Tee Plain 1 1/4" -5- 56. Pc Ppr Coupling Plain 1 1/4" -5- 57. Pc Ppr Coupling Plain 3/4" -20- 58. Pc Ppr Coupling Reducer Plain 1 1/4 X 3/4 -5- 59. Pc Ppr Coupling Reducer Plain 1 X 3/4 -5- 60. Pc Ppr Coupling Reducer, Female 3/4 X 1/2 -20- 61. Pc Ppr Union Patente Metal Joint 1 1/4" -5- 62. Pc Pe Tee 2" -3- 63. Pc Pressure Switch, Furnas, Heavy Duty, Good Quality -15- 64. Pc Foot Valve 1 1/4", Heavy Duty, Good Quality -3- 65. Pc Foot Valve 1", Heavy Duty, Good Quality -3- 66. Pc Foot Valve 3/4", Heavy Duty, Good Quality -3- 67. Pc Check Valve 1 1/4", Heavy Duty Good Quality -3- 68. Pc Check Valve 3/4", Heavy Duty Good Quality -3- 69. Pc Tank Fittings, Heavy Duty, Good Quality -15- 70. Pc Inlet Valve (supply Fill Valve), Heavy Duty, Good Quality -10- 71. Pc Angle Valve, Heavy Duty, Good Quality 1/2 X 1/2 -50- 72. Pc Flexible Hose, Heavy Duty, Good Quality 1/2 X 1/2 -20- 73. Pc Service Faucet, Heavy Duty, Good Quality -100- 74. Pc Lavatory Faucet, Heavy Duty, Good Quality -15- 75. Pc Gooseneck Lavatory Faucet, Heavy Duty, Good Quality -45- 76. Can Upvc Solvent, 400cc Wth Applicator -20- 77. Pc Tapelon Tape 3/4" -360- 78. Pc G.i. Plug 1 1/4" -5- 79. Pc G.i. Plug 1" -5- 80. Pc G.i. Plug 3/4" -10- 81. Pc G.i. Plug 1/2" -10- 82. Pc Upvc Pipe, 2" S1000 -10- 83. Pc Ppr Elbow Reducer, Female 3/4 X 1/2 -30- 84. Pc Pressure Gauge, Heavy Duty -10- 85. Pc Empeler Goulds, 1.0hp, 1.5hp, Bronze, Heavy Duty -1- 86. Pc Guide Vane Goulds, 1.0hp, 1.5hp, Bronze, Heavy Duty -1- 87. Pc Capacitor For Goulds Pump, 64-77mfd 220vac -5- 88. Pc Pressure Tank, 220 Gals, Stainless #14 -1- 89. Pc Pressure Tank, 82 Gals, Stainless #14 -3- 90. Pc Pressure Tank, 42 Gals, G.i. #14 -3- 91. Unit Electric Impact Drill -2- 92. Unit Circular Saw 235mm -1- 93. Unit Circular Saw 185mm -2- 94. Unit Fusion Machine 1/2-2.0 Dia. -1- 95. Unit Angle Grinder 4" -1- 96. Unit Electric Plainer -1- 97. Unit Welding Machine 200amp, Portable -1- 98. Unit Cut-off Machine 14" Dia. -1- 99. Unit Pump, 1.5hp Deepwell Horizontal -1- 100. Unit Pump, 1.5hp Deepwell Vertical -1- 101. Unit Pump, 1.0hp Shallow -1- 102. Pc Gasket (for Goulds Water Pump) -10- 103. Pc Bearing (for Water Pump) 6203, 6204 -10- 104. Pc Mechanical Seal, Goulds Water Pump, Heavy Duty -10- 105. Pc Mechanical Seal, Saer Water Pump, Heavy Duty -10- 106. Pc Upvc Wye 2" -10- 107. Pc Upvc Tee 2" -10- 108. Pc Upvc Elbow 4", 45deg -10- 109. Pc Upvc Elbow, 3", 45deg -10- 110. Pc Upvc Elbow, 2", 45deg -30- 111. Pc Upvc Elbow, 2" -30- 112. Set Bidet -10-

Details: Description Please Quote Your Lowest Price Inclusive Of Vat On The Following Item/s Or Lot/s Listed Below, Subject To The Terms And Conditions Of This Rfq, And Submit Your Quotation Duly Signed By Your Representative Not Later Than December 2, 2024, At Bids And Awards Committee Of Bfar 8, 3rd Floor Mrgp Commercial Bldg, Marasbaras, Tacloban City. For More Information Please Call The Bac Secretariat At Telephone Nos.: 888-0381 (local 1003) Or Browse The Philgeps Website. Item/job Description: 1 Ss Gi Pipe, 3 Inches Diameter, Sched.60 X 8ft 2 Piece 33,600.00 2 Hardwood Bushing, 3 Inches (outside) & 1 Inch Diameter X 1 Foot (inside) 4 Piece 7,200.00 3 Outrigger Beam Hardwood, 30-35ft X 6"x6" 4 Piece 80,000.00 4 Battery 3sm 2 Unit 12,000.00 5 Pump Belt,5450.17 X 1120 Li 2 Piece 2,400.00 6 Battery Terminal 6 Piece 2,400.00 7 Bildge Pump, 120v, 4m 2 Piece 2,200.00 8 Fuel Filter 317 3 Piece 1,500.00 9 Oil Filter C-503 3 Piece 1,500.00 10 Gear Oil, 1 Gal 1 Gal 2,000.00 11 Engine Oil 10 Liter 8,000.00 12 Welding Rod #32, 20kgs/box 2 Box 4,000.00 13 Sun Shade Net-uv Resistant Hdpe (12ftx16ft) 3500 Bundle 3,500.00 Terms And Conditions: 1. That The Winning Bidder Shall Deliver The Items To Bfar 8-crm Office-diit, Tacloban City 2. That The Materials Must Be Brand New And In Good Condition; 3. That The Winning Bidder Shall Deliver The Items Within 30 Days Upon Receipt Of The Purchase Order; 4. That The Winning Bidder Must Specify The Technical Description And Brand Being Offered; 5. That The Payment Shall Be Made After The Complete Delivery Of Items, Inspected By Bfar's Duly Authorized Representative, Documents Completed, And Papers Processed. Bidders Must Submit The Following Documents: 1.) Philgeps Registration Number 2.) Mayor's Permit 3.) Request For Quotation (rfq) 4.) Omnibus Sworn Statement (oss)* *for Single Proprietorship – Special Power Of Attorney, In Case The Person Signing This Request For Quotation Is Not The Business Owner, In Its Original And Duly Notarized Form. *for Corporation – Board Resolution/secretary’s Certificate, In Its Original And Duly Notarized Form. *for One Person Corporation (opc) – President’s Certificate/secretary’s Certificate, In Its Original And Duly Notarized Form.

Details: Description Airconditioning Supplies And Equipment For The Use Of Fmd-hras At Dpwh Head Office Cy 2024 1 Refrigerant Gas 22, 13.6 Kilos/tank R-22 6 Tank 2 Refrigerant Gas R-410a, Kilos/tank 11.3 Kg 4 Tank 3 Acu Cleaning Chemical, Concentrated, 16 Ltrs/container 4 Container 4 Condensate Removal Pump (for Split/ Wall Type Acu) 10 Pc 5 Condensate Removal Pump (for Floor/ Ceiling Acu) 3 Pc 6 Fan Capacitor, 2 Uf 5 Pc 7 Fan Capacitor, 3 Uf 5 Pc 8 Fan Capacitor, 5 Uf 5 Pc 9 Fan Capacitor, 10 Uf 10 Pc 10 Magnetic Contactor, 60 Amps, 3ph 5 Pc 11 Acu Thermostat Control, Manual/analog 3 Pc 12 Industrial Whitening Detergent Powder, 1kg/pack 25 Pack 13 Pvc Tee, 1" Blue 20 Pc 14 Pvc Tee, ¾" Blue 20 Pc 15 Nitrogen Gas (50lbs Tank, With Adaptor), For Aircon Use 1 Tank 16 141b Aircon Flushing Chemical, 500ml 30 Cans 17 Electrical Tape, 10pcs/roll 5 Rolls 18 Work Gloves, Comfort Grip, Nitrile Coated, Cut Resistant, Large Size 15 Pairs Total Amount (php) Please Specify Total Amount In Words (php) "terms And Conditions : " "1. All Entries Must Be Typewritten Or Legibly Written. " 2. Delivery Period Within 15 Working Days Upon Receipt Of The Approved Funded Purchase Order (p.o). Administrative Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall Be Imposed For Non- Delivery Without Valid Reason. "3. Warranty Shall Be For A Mininum Of One (1) Year For Equipment And Three (3) Months For Supplies From Date Of Acceptance By " " The End-user. " "4. Price Validity Shall Be For A Period Of Sixty (60) Calendar Days. " "5. Philgeps Registration Number And Mayor's Permit Shall Be Attached Upon Submission Of The Quotation. " Dti /sec And Latest Tax Clearance Shall Be Submitted Before The Award Of Purchase Order (p.o.). 6. To Establish Financial Capability, Bidders May Attach/includenin Its Quotation A Commited Line Of Credit (clc) Equivalent To 10% Of The Abc, From A Commercial Or Universal Bank. 7. Bidders Must Qoute For All Of The Items And Shall Submit A Proposal On Each Item And Evaluation And Award Of Contract Will Be Undertaken On A Lump Sum Basis. 8. Any Erasure, Correction Or Alteration Made By The Bidders In Any Of The Items Shall Render The Bid Non-complying, Hence, A Ground For Disqualification. 9. The Dpwh Reserves The Right To Accept Or Reject Any Bid To Annul The Bidding Process, And To Reject " All Bids At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder. " "10. Please Indicate The Brand And Model For Each Items Being Offered. " "medmier G. Malig Assistant Secretary For Technical Services And Information Management Service Chairperson, Bac For Goods "