Municipality Of Compostela, Cebu Tender

Description 1 Lot = Establishment Of Advance Waste Solution With Environment Pollution Control Device (aws-epcd) & Component Machineries & Equipment And Shed Building. • 1 Unit Advance Waste Solution Environmental Pollution Control Device (50) Capacity: 3-4 Cu.m/hr (minimum) By Product: Hot Air, Hot Water And Fertilizer Ash Voltage: 110-220 Emission: Complying To Standard Noise Level: 85 Decibels Dimension (hxwxl): 5000x1400x3850mm Reactor Pyrolysis Volume: 1000mm Inlet Dimension-top (lxw): At Least 2x2 Feet Inlet Dimension- Bottom (lxw): 8x8 Feet (minimum) Chimney Height: 12 Feet Minimum • 1 Unit Municipal Waste Shredder Capacity: 500kgs./hr (minimum) Engine: 13 Hp Gasoline Size Of Materials Inlet: 400x300mm (minimum) Amtec Tested Iso Certification Swing Type With Chipper • 1 Unit Dry Scrubber, Diameter 102cm, Height 8ft.(minimum) • 1 Unit Dry Scrubber, Diameter 30 Inches, Height 4 Ft. (minimum) • 1 Unit 50 Kva, 3-phase Transformer • 1 Unit Plastic Shredder/pulverizer/grinder(3 In 1) Capacity: 100-150kgs/hr(minimum) Motor: 4kw Size Of Materials Inlet: 250x200mm (minimum) Amtec Tested Iso Certification Quantity Of Tools: 5 Pcs (1 Spark Plug Wrench, 2 Open Wrench, 1 Screw Driver, 1 Ear Protector Plug) Outline Diameter: 850x600x1300mm (minimum) • 1 Unit Plastic Extruder With Environmental Pollution Device (meeting Machine) Capacity: 50-100kg/hr Plastic Densifier Main Motor 5hp, Single Phase, 220 Volts, 60hz Heating: Heating Zones 3 Periods Heating Power: 2.1kw*3=6.3 Kw Electrical System: Good Quality/heavy Duty Temperature Control Meter For Air Pollution Control Devices: 1 Unit Wet Scrubber 1 Unit Dry Scrubber (with 1/2hp X 2 Units Electric Motor) • 1 Unit Rotary Composter (bioreactor) Capacity:800-1000kgs/load Conduction Motor: 5hp Gear Reducer Ratio: 120:20:1 With Extra Squeezer • 1 Unit Glass Bottle Pulverizer Capacity: 500-1000kgs/hr Engine: 8hp, Water Cooled, Diesel Engine Rotor Diameter: 215mm (minimum) Hoppe Dimension: 22”x18” (minimum) Blades Number: 26 Blades High Impact Steel (minimum) Overall Dimensions: Length 60”, Width46”, Height 62” Noise Level: 95db(a) (maximum) Size Of Perforation Screen: 5/16mm Thickness: 1.2mm With Amtec Test Results • 1 Unit Hollow Blocks Maker Powered By: 1hp, Single Phase, 220 Volts, 60hz Electric Motor Motor Rpm: 1740 Rev/min With 100 Pellets Iso Certification • 1 Unit Mortar Mixer Machine Type: Concrete Mixer Powered By: %hp Motor Height: 39”(minimum) Width: 40” (minimum) • 1 Unit Manual Sorting Conveyor (with Speed Reducer) Material Of Conveyor: Hard Rubber Length: 6 Meters (minimum) Width: 1 Meter (minimum) Height: (including The Motor) 54” (minimum) For Advance Waste Solution (air Scrubber) • 1 Set Cylindrical Gas Reducer 8ft Height, 40” Diameter (minimum) Complete With Ingredient That Will Reduce Dioxin And Furan • 2 Set Wet Cylindrical Scrubber 48” Height X 40” Diameter Coupled With Water Pump, 2 Hp Single Phase, 220 Volts, 60hz. • 1 Lot Installation Of Shed 16mx18m • 1 Unit Multiwaste Shredder With Built-in Squeezer Capacity: 1,000-2,000kg/hr Description: Rapid Composting Machine Powered By 10hp, 3 Phase/220v, 1800rpm • 1 Unit The Stc Water Treatment System (setting Method) Term Of Reference: 1.hands-on Trainings And Supervise Daily Operations Of Operators On Proper Usage Of All Machines For A Period Not Less Than Fifteen (15) Working Days. 2.free Maintenance Of The Whole System Every Month For A Period One (1) Year. 3.warranties And Guarantees Of Spare Parts Of Every Machine At Least One (1) Year. 4. The Company To Submit Certificate Of Compliance From Denr-emb & Approved Laboratory Result For Furan And Dioxin Test. 5. To Assist Lgu In Complying Permit To Operate With Denr 6. Supplier Of Machine Must Have A Demo Unit In The Philippines. 7. Delivery, Installation, Commissioning Of Machines And Shed Must Be Within 120 Days After Receipt Of Notice To Proceed 8. Repair And Maintenance Shall Be Handled By The Supplier After The 1 Year Warranty Expire, Free Labor Cost While Cost Of Parts Shall Be Billable To Lgu. 9. The Aws-epdc (50) Shall Be Payable To The Supplier In The Following Manner: -yr.1 (2024) – 30% Of The Tpc -yr.2 (jan. 2025)- 35% Of The Tpc -yr.3 (jan, 2026)-35% Of The Tpc 10. Supplier Must Submit Environmental Verification