Furniture Tenders

Description: Restricted tender with public participation competition Vob/a Bp-2025-0003-de Earthworks and shell construction work, B-002869 Ge 700 Bpol return process The building is a three-story office building (building 700) in the security area of Fraport A ... Morebp-2025-0003-de Earthworks and shell construction work, B-002869 Ge 700 Bpol return process The building is a three-story office building (building 700) in the security area of Fraport Ag, but not on the apron. The building is currently not in use and has been vacant for some time. Parts of the building have a basement, and parts are elevated above the outdoor facilities. Building services systems and expert inspections for the purposes of the maintenance and upkeep of the building are ongoing. As part of an extensive renovation of the interior and exterior areas and by adding additional uses/buildings, building 700 is to be rented to the Federal Police for the long term for repatriation processes and thus revitalized. The following measures are necessary as part of the earthworks: Demolition work is planned for the inner courtyard of the site. This includes, for example, the disposal of gravel and rubble, the terrace and the footbridge (approx. 300m²). All of the furnishings in the courtyard will also be dismantled and disposed of, ie fence, park bench, lamps, picnic table, trash can, table tennis table, etc. (approx. 25 pieces of furniture). In the outdoor facilities, a temporary construction road (825 m²) must be built to the construction site. In addition, approx. 400 m² of paving stones and 110 m of concrete blocks and angled retaining walls must be demolished. Underground pipes must be created, the total pipe length is ~360 m. For the trenches of the drainage channels / shaft structures, approx. 825 m³ of soil up to a maximum of 2.50 m must be loosened and stored to the side. In addition, trench shoring is required for 1275 m². As part of the shell construction work, two extensions are being built onto an H-shaped existing building. A detention area in reinforced concrete construction is being built between the two building blocks (width = 11.25m, length = 34m, height = 5m). The other extension is a steel-constructed suitcase storage facility (width = 9.3m, length = 22.05m, height = 5m) which is connected to the existing building via a new lock (width = 2.85m, length = 12.5m, height = approx. 3m). The detention area will be raised, i.e. the ceiling slab under the ground floor will be placed on strip foundations and will be approx. 70 cm above ground level. The luggage storage area will be provided with a trapezoidal sheet metal roof and the detention area with a reinforced concrete ceiling. Cells will be built inside the detention building. In addition, facade openings will be closed (approx. 200 m²) and core drillings (201) will be made. In addition, isolated concrete renovation work is planned on the external facades (1500 m²). The technical center will be extended on the existing roof (height: approx. 12 m). For this, new steel supports (5) will be installed and a new reinforced concrete beam (4 m³) will be made.

Details: Description Technical Specifications Hauling Expense For The Transfer Of Gsis General Santos Branch Office Prepared By: (original Signed) Hannah Korina F. Ompoco Staff Officer I Approved By: (original Signed) Josephine B. Marcial Branch Manager Gsis General Santos Branch Office   Technical Specifications 1. Project Title Hauling Expense For The Transfer Of Gsis General Santos Branch Office 2. Total Budget The Total Budget For The Project Amounts To Php 300,000.00. Said Budget Is Included In The Corporate Budget For Cy 2024. 3. Brief Discussion Why The Goods And Services To Be Procured Are Necessary Hauling Furniture, Fixtures, Equipment, And Other Necessary Items Is Crucial For Ensuring The Gsis General Santos Branch's Smooth Relocation And Continued Operations. It Helps Prevent Damage To Valuable Items And Minimizes Downtime, Ensuring Efficient Setup At The New Location. Professional Hauling Services Also Ensure Compliance With Safety And Regulatory Standards During The Transfer. 4. Scope Of The Project The Project Includes Services Necessary For The Completion Of The Hauling Services. This Project Will Be Procured Through Small Value Procurement. 5. Detailed Specifications Of The Items, Materials, Equipment/hardware/software, Accessories And/or Services To Be Procured # Item Description 1 Lot Hauling Of Furniture, Fixtures And Equipment Hauling Of Furniture, Fixtures And Equipment Other Materials For Hauling In The Transfer Process 6. Manpower Requirements • The Service Provider Shall Have Manpower That Is Fully Qualified To Perform The Work Provided, And That Are Authorized, Properly Trained, Equipped, Organized, And Financed To Perform Such Work. The Service Provider Shall Perform All Work In Accordance With All Conditions Within The Time Stipulated In The Contract. Contact Details Of The Point-person Of The Service Provider Must Be Given To The Office Of The Branch Manager. • The Service Provider Shall Provide Experienced And Qualified Manpower, Tools, And Equipment That Are Capable Of Producing The Quality And Quantity Of Work And Materials Required To Complete The Project As Specified In The Approved Scope Of Work And Specifications. • The Service Provider Shall Agree That The Required Services Shall Be Conducted After Office Hours, Weekends Or Holidays, As May Be Determined By Gsis, In Order Not To Disturb Or Disrupt The Working Schedule Of Gsis Personnel. The Service Provider Shall Exercise Extraordinary Diligence In The Performance Of Its Services To Ensure That No Illness, Accident And/or Any To Its Employees Or Guests Will Take Place. The Service Provider Shall Assume Full Responsibility For Any Claim Or Liability That May Arise By Reason Of Illness, Accident And/or Damage Due To Any Or All Acts Of Omission, Negligence Or Fault Of The Service Provider And Its Agents, Thereby Rendering Gsis Free And Exempt From Any Such Claim Or Liability. • The Service Provider Shall Secure All Necessary And Applicable Permits Or Licenses By All Government And Regulatory Agencies To Operate And Provide Services Not Mentioned In This Technical Specifications. 7. Support Service Requirements • The Service Provider, Through The Dedicated Point-person, Must Accomplish The Gsis Supplier Registration Information Sheet (sris) And Submit The Documentary Requirements For Vendor Registration. 8. Warranty And After-sales Service Requirements • The Supplier Warrants That The Materials Supplied Under The Contract Are New, Unused, Of The Most Recent Or Current Models, And That They Incorporate All Recent Improvements In Design And Materials, Except When The Technical Specifications Required By The Procuring Entity Provides Otherwise. • The Supplier Further Warrants That All Materials Supplied Under This Contract Shall Have No Defect, Arising From Design, Materials, Or Workmanship Or From Any Act Or Omission Of The Supplier That May Develop Under Normal Use Of The Supplied Materials In The Conditions Prevailing In The Country Of Final Destination. • The Repair Shall Be Guaranteed Against Poor Workmanship Under The Terms Of The Standard Warrant. • In Case There Are Defects/damages To The Unit After The Conduct Of Repair, The Cost Of Repair And Labor Shall Be Charged To The Supplier. 9. Clear Statement Of The Required Standards Of Workmanship, Materials And Performance Of The Goods And Services To Be Procured • The Supplier Must Deliver The Labor And Materials/goods/items In Accordance To The Specifications Stated Herein And Must Be Free From Any Factory Defect. • The Vendor/service Provider Shall Be Responsible For Providing Supplies, Materials, And Labor, Be Sure To Inspect The Unit Before And After The Scheduled Preventive Maintenance Handled By Trained And Competent Professionals. Once An Agreement Is Made, The Vendor/service Provider Shall Proceed With The Preventive Maintenance Services. 10. Brand And Specifications Of The Existing Items, Materials, Equipment/hardware/ Software And Accessories, If The Former Are Related To The Goods And Services To Be Procured “not Applicable In This Project”. 11. Drawings/plans And Other Necessary Information “not Applicable In This Project”. 12. Schedule And Place Of Delivery The Winning Service Provider Must Conduct The Hauling Immediately After Receiving The Notice Of Award And Purchase Order And Must Finish The Scope Of Work On Or Before January 31, 2025. 13. Terms Of Payment • Payment Shall Be Made Upon Completion Of Delivery And Upon Submission Of The Supporting Documents For Payment Processing (e.g., Delivery Receipt, Sales Invoice, Billing Statement, Warranty Certificate If Applicable, And Other Documents Required In This Technical Specifications). • Payment Shall Be Subject To Applicable Taxes, Auditing And Accounting Rules And Regulations And Existing Rules And Regulations Of Gsis Relative To Payment Of Procurement Contracts. 14. Responsibilities Of The End-user Unit During Project Implementation • In The Implementation Of Work, The Gsis Or Its Representative Shall Not Be Responsible For Any Accident Such As Death Injuries And Diseases Received By The Service Provider Or Any Of His Employee Or Laborers. Likewise, The Gsis Shall Not Be Responsible For Any Loss Or Damage Of Materials, Tools, Equipment Delivered On The Job Site. Damages On The Gsis Properties And Equipment Caused By The Service Provider Shall Be Replaced/repaired At His Own Expense To The Satisfaction Of The Gsis. In The Event Of Failure Of Repair And Or Replacement Of The Same, The Gsis Shall Deduct The Cost Of Such Repairs From The Payment Due To The Service Provider. • The Execution Of All Works Shall Be Subject To The Inspection And Acceptance By The Gsis Authorized Representatives. 15. Penalty For Delay When The Winning Bidder Fails To Satisfactorily Deliver The Services Under The Contract Within The Specified Delivery Schedule, Inclusive Of Duly Granted Time Extensions, If Any, The Supplier Shall Be Liable For Damages For The Delay And Shall Pay Gsis Liquidated Damages, Not By Way Of Penalty, An Amount Equal To One-tenth (1/10) Of One Percent (1%) Of The Cost Of The Delayed Goods Scheduled For Delivery For Every Day Of Delay Until Such Goods Are Finally Delivered And Accepted By Gsis (section 3.1 & 3.2 Liquidated Damages Of Rirr – Annex D). Gsis Need Not Prove That It Has Incurred Actual Damages To Be Entitled To Liquidate Damages. Such Amount Shall Be Deducted From Any Money Due Or Which May Become Due To The Supplier, Or Collected From Any Securities Or Warranties Posted By The Supplier, Whichever Is Convenient To The Procuring Entity Concerned. In No Case Shall The Total Sum Of Liquidated Damages Exceed Ten Percent (10%) Of The Total Contract Price, In Which Event The Procuring Entity Concerned May Rescind The Contract And Impose Appropriate Sanctions Over And Above The Liquidated Damages To Be Paid. 16. Documentary Requirements The Service Provider Must Comply With The Dbm Gppb Non-policy Matter No. 045-2017, If Applicable. “dbm Gppb Non-policy Matter No. 045-2017, "the Gppb Recently Approved Amendments (effective 5 December 2017) To The Documentary Requirements For Negotiated Procurement Under The Small Value Procurement Modality Per Appendix A, Annex “h” Of The 2016 Revised Irr. Thus, Income Or Business Tax Returns Shall Be Required For Procurement Projects With Approved Budget For The Contract (abc) Above ₱500,000.00 And The Omnibus Sworn Statement Shall Be Required Only For Procurement Projects With Abc Above ₱50,000.00.” The Above-mentioned Documentary Requirement Shall Be Submitted By The Winning Vendor Before The Issuance Of The Notice Of Award (noa) / Purchase Order (po) / Contract. 17. Data Privacy The Winning Bidder/supplier Must Comply With All The Provisions Of Republic Act No. 10173, Known As The “data Privacy Act Of 2012” And Its Implementing Rules And Regulations. 18. Non-disclosure Agreement The Winning Bidder/supplier Shall Protect Confidential Information About The Gsis, And To Use It Only For Purposes Of Complying With Its Tasks And Obligations Under The Official Bid Document/contract/purchase Order. It Shall Not Disclose Any Confidential Information About The Gsis Project Or Procurement To A Third Party Without The Consent Of The Gsis. “confidential Information” Refers To Information Concerning The Affairs Of The Gsis Which Are Not Available To The Public Which, If Disclosed, May Compromise The Security Of The System. The Winning Bidder/supplier Shall Not Disclose Any Confidential Information Acquired During Its Engagement With Gsis Even After The Expiration Or Termination Of The Contract. Important Reminder The Government Service Insurance System (gsis) Warns The Public/bidders Of Unscrupulous Individuals And Groups Posing As Officers/employees Of The Gsis Soliciting Money For Alleged Aid For Whatever Purpose. Do Not Give Anything To These Unscrupulous Individuals And Groups. Gsis Is Fully Compliant With The No Solicitation And Gift Policy. In This Regard, Gsis Officials And Employees Are Prohibited From “directly Or Indirectly Soliciting Gifts, Favors Or Benefits From Stakeholders And Directly Or Indirectly Soliciting, Accepting Or Receiving Any Gift, Favor Or Benefits From Any Party Which May Influence The Performance Of Their Official Functions Or Which May Be Perceived As Influencing Their Past, Present And Future Official Functions. We Thus Enjoin The Cooperation Of The Public/vendors/suppliers To Report These Individuals/groups To Gsis Through The Office Of The Vice-president, General Services Office At (02) 7976-4900 Local 4971 And Materials Management Department (mmd) At (02) 7976-4900 Local 3608.

Details: Description Republic Of The Philippines Province Of Nueva Ecija Municipality Of Talavera Invitation To Apply For Eligibility And To Bid Goods 2025 - 11 The Municipal Government Unit Of Talavera, Through Its Bids And Awards Committee (bac), Invites Contractors For Suppliers For Public Bidding Of Goods To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Contract/project: Name Of Projects Location Brief Description Approved Budget For The Contract (abc) Contract Duration Price Of Bid Documents Purchase Of Ict Equipment, Office Equipment, Furniture & Fixtures Municipality Of Talavera Desktop Computer/ Laptop / Printers/digital Camera/aircon/office Table/chairs, Etc… 1,738,700.00 90 Days 5,000.00 Prospective Bidders Should Passes A Valid License Applicable To The Contract, Have Completed A Similar Contract Both Design And Construction, With A Value At Least 50% Of The Abc, And Have Key Personnel (for Construction & Design Profession) And Equipment, (listed In The Bidding Documents) Available For The Prosecution Of The Contract. The Bac Will Use Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bid Evaluation Procedure To Be Adopted Shall Be In Accordance With The Gprb Resolution No. 22-2007 Dated September 8, 2007. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of R.a 9184 And Its Implementing Rules And Regulations (irr) And Gprb Resolution No. 22-2007 Dated September 8, 2007. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule Issuance Of Bid Documents January 9 - 31, 2025 Deadline For Submission Of Bid And Opening Of Bids January 31, 2025 (10:00 A.m.) ` Bid Opening Shall Be Conducted At The Municipal Engineering Office, Municipal Compound, Pag-asa, Talavera Nueva Ecija. Pursuant To The Iatf Guidelines And Strict Implementation Of The Minimum Health Standard And Safety Protocol. The Bac Will Issue To Prospective Bidders Eligibility Forms At Bac Office, Engineering Office, Municipal Building, Talavera, Nueva Ecija Upon Their Submission Of A Loi. Prospective Bidders Shall Submit The Eligibility Requirements To The Bac At The Said Address. They May Also Obtain The Results Of The Eligibility Check By The Bac At The Same Address. The Bac Will Issue Bidding Documents Only To The Bidders Declared By The Bac To Be Eligible For The Bidding Upon Payment Of A Non-refundable Amount Of Bidding Documents Stated In The Implementing Rules And Regulation Of R.a. 9184 To The Municipal Treasurer’s Office Of Talavera. The Award Shall Be Made After Bid Evaluation & Post Qualification Of The Lowest Calculated Bids. The Lgu - Talavera Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Contact Person: Marvin Dc. Marcial Approved By: Bac Secretariat (sgd) Alfredo S. Atraje Bac Chairman Noted: (sgd) Hon. Nerito S. Santos Jr. Municipal Mayor

Details: Description Qty Unit Items & Description 12 Pc Spin Mop, 360, Tornado Mop Spin-dry Bucket With 1 Microfiber Mop Head Set, Original Spinner Mop, Heavy Duty 10 Pc Double Sided Glass Cleaner Wiper Extendable, Cleaner Windshield, Cleaning Sponge And Rubber Wiper, Car Wiper Cleaning Equipment Double Sided Rectangular Glass Wiper, Extendable 2 Unit Aluminun Ladder, 6 Step Heavy Duty 30 Pc Hard Broom, Good Quality 40 Pc Soft Broom, Good Quality 30 Bottle Muriatic Acid, 1 Liter 20 Pc Dust Pan Plastic, Heavy Duty 30 Pc Dipper, Plastic, Good Quality, Medium 40 Pc Door Mat Ordinary 30 Pc Rubber Floor Mat, Anti Slip 20 Pc Toilet Brush With Handle 30 Pc Hand Brush, Nylon Bristle, Plastic 50 Pc Sponge, Heavy Duty 8 Pack Detergent Powder, Anti-bacterial, 6 X 2000g/pack 40 Gallon Toilet Bowl Cleaner, Power Clean, 1 Gallon 30 Liter Floor Multi Cleaner/disenfectant, 1000 Ml 40 Pc Air Freshener Scented Gel, 180 Grams 30 Pc Bathroom Deodorizer With Holder, 50 Gram 40 Bottle Dishwashing Liquid, 780ml 1 Container Chlorine Granules, 40 Kg 30 Bottle Multi-purpose Bleach, Original, 3.6l 10 Pack Garbage Bag, Black, Small, 100pcs 5 Pack Garbage Bag, Black, Medium, 100pcs 10 Pack Garbage Bag, Black, Large, 100pcs, Thick 40 Pack Garbage Bag, Black, Xl, 100pcs, Thick 30 Pack Bathroom Tissue Paper, 2ply, 12 Rolls/pack 20 Gallon Alcohol, Ethyl, 70% 30 Pc Disinfectant Spray, 320g, Assorted Scents 5 Pack Moth Balls, Rose Fragrance, 1kg/pack 20 Bottle Glass Cleaner, Power Clean, 500ml 20 Bundle Cotton Hand Gloves, 24 Pcs/12 Pairs 30 Box Surgical Hand Gloves, 100 Pcs/box 30 Pc Furniture Polish Spray, 330ml 40 Bottle Liquid Hand Soap, Antibacterial, 225 Ml 20 Can Floor Wax, 450 Grams 30 Pc Multi Insect Killer Spray,600 Ml 30 Bottle Toilet Clog Remover, 1l 20 Bottle Fabric Conditioner, 2.63l 30 Bundle Round Rags, 50pcs/bundle 30 Pc Plastic Pail With Handle, 12l 6 Pc Raincoat, Multifunction Poncho, Heavy Duty, Size Xl 6 Pair Boots, Hightube, Rainshoe, Size 40-45

Details: Description Republic Of The Philippines Province Of Nueva Ecija Municipality Of Talavera Invitation To Apply For Eligibility And To Bid Goods 2025 - 02 The Municipal Government Unit Of Talavera, Through Its Bids And Awards Committee (bac), Invites Contractors For Suppliers For Public Bidding Of Goods To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Contract/project: Name Of Projects Location Brief Description Approved Budget For The Contract (abc) Contract Duration Price Of Bid Documents Purchase Of Ict Equipment, Office Equipment, Furniture & Fixtures Municipality Of Talavera Aircon/laptop/printers/etc… 493,750.00 90 Days 500.00 Prospective Bidders Should Passes A Valid License Applicable To The Contract, Have Completed A Similar Contract Both Design And Construction, With A Value At Least 50% Of The Abc, And Have Key Personnel (for Construction & Design Profession) And Equipment, (listed In The Bidding Documents) Available For The Prosecution Of The Contract. The Bac Will Use Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bid Evaluation Procedure To Be Adopted Shall Be In Accordance With The Gprb Resolution No. 22-2007 Dated September 8, 2007. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of R.a 9184 And Its Implementing Rules And Regulations (irr) And Gprb Resolution No. 22-2007 Dated September 8, 2007. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule Issuance Of Bid Documents December 23, 2024 - January 15, 2025 Deadline For Submission Of Bid And Opening Of Bids January 15, 2025 (10:00 A.m.) ` Bid Opening Shall Be Conducted At The Municipal Engineering Office, Municipal Compound, Pag-asa, Talavera Nueva Ecija. Pursuant To The Iatf Guidelines And Strict Implementation Of The Minimum Health Standard And Safety Protocol. The Bac Will Issue To Prospective Bidders Eligibility Forms At Bac Office, Engineering Office, Municipal Building, Talavera, Nueva Ecija Upon Their Submission Of A Loi. Prospective Bidders Shall Submit The Eligibility Requirements To The Bac At The Said Address. They May Also Obtain The Results Of The Eligibility Check By The Bac At The Same Address. The Bac Will Issue Bidding Documents Only To The Bidders Declared By The Bac To Be Eligible For The Bidding Upon Payment Of A Non-refundable Amount Of Bidding Documents Stated In The Implementing Rules And Regulation Of R.a. 9184 To The Municipal Treasurer’s Office Of Talavera. The Award Shall Be Made After Bid Evaluation & Post Qualification Of The Lowest Calculated Bids. The Lgu - Talavera Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Contact Person: Marvin Dc. Marcial Approved By: Bac Secretariat (sgd) Alfredo S. Atraje Bac Chairman Noted: (sgd) Hon. Nerito S. Santos Jr. Municipal Mayor

Details: Description Office Supplies Computer Ink Black 18 Bot Computer Ink Yellow 18 Bot Computer Ink Cyan 18 Bot Computer Ink Magenta 18 Bot Record Book 10 Pc Expanded Envelop 40 Pc Plastic Cover(cellophane) 1 Roll Folder 100 Pc Sign Pen (black) 100 Pc Ballpen (green) 1 Pc Bond Paper (long) 5 Ream Bond Paper (a4) 40 Ream Sub-total Water/electricity/utility /internet Expenses Electricity 3 Pax Water 3 Pax Internet Subscription 3 Pax School Utility 3 Pax Sub-total Medical, Dental And Laboratory Supplies Expense Alcohol (gallon) 10 Gal Alcohol (500ml) 38 Pc Sub-total Other Supplies And Materials Expenses Flash Light 10 Pc Padlock 10 Pc Mop 1 Pc Floorwax 35 Can Insecticide 3 Pc Sub-total Semi-expendable (furniture And Fixture) Chair (mono Block) Beige 50 Pc Chair (office) 3 Pc Filing Cabinet (4 Layerlateral) 2 Pc Filing Cabinet (4 Layer Horizontal) 1 Pc Repairs School Buildings Hollow Blocks 200 Pc Cement 20 Bag Drb 10 Mm Standard 5 Pc Ctw 9 Mm Standard 3 Pc Pvc Door 1 Pc Flash Door 70x210 1 Pc Pvc #2 2 Pc Pvc #4 9 Pc Coarse Sand 4 Cubic Fine Sand 2 Cubic Elbow #2 2 Pc Elbow #4 3 Pc 2x2x10 Coco Lumber 9 Pc 1x4x8 Good Lumber 3 Pc Nails #3 1 Kl Nails #2 ½ 1 Kl Nails #1 1/2 Kl Tire Wire # 16 1 Kl Toilet Bowl 1 Pc Door Knob 2 Pc Tiles 60x60 4 Pc Tiles 40x40 18 Pc Solvent Cement 1 Can Pvc Pipe 1/2 2 Lenght Faucet 1 Pc Plywood 5 Mm Marine 2 Pc Umbrella Nail 1 Kl Kitchen Sink 1 Pc Hinges 3x3 2 Pc Hollow Block Bricks 12 Pc Labor (lavatory And Cr) Marine Plywood #3/4 2 Pc 3’’x3’’x6’(s4s) 4 Pc 1’’x6’’x8’ Lumber 3 Pc Quick Dry Enamel 1 Gal Paint-cast 1 Gal Paint Primer 1 Gal Paint Roller 2 Pcs Sand Paper 5 Sheet Paint Thinner 2 Bot Nails # 2 1 Kl Wood Glue 1 Pack Labor (fabrication Ict)

Details: Description Tesda-op-as-04-f03 Rev. No. 01-07/21/21 Annex “a” Price Quotation Form Date: ________________ Tesda Vii - Provincial Office Salinas Drive Avenue Lahug Cebu City Sir/madam: After Having Carefully Read And Accepted The Terms And Conditions In The Request For Quotation, Hereunder Is Our Quotation/s For The Item/s As Follows: No. Item Description Qty Unit Approved Budget For The Contract (in Peso) Offer "compliance With The Technical Specifications (please Check)" Price Offer Remarks Yes No 1 Alcohol, Ethyl, 70 % 15 Galloon 550.00 2 Dishwashing Liquid Soap, 1 Galloon, Anti-bacterial 10 Bottle 650.00 3 Dishwashing Sponge, Sponge With Scourer Multipurpose Cleaning Scrub 30 Piece 40.00 4 Laundry Soap, Liquid, 2.5l, For Washing Maching 10 Pouch 900.00 5 Fabric Conditioner, 2l Anti-bacterial 10 Pouch 450.00 6 Disinfectant Spray / Air Freshener, 510g, Spray Can 10 Can 600.00 7 Multi-insect Kille, Odorless, 500ml, Spray Can 24 Can 375.00 8 Furniture Polish, Enchancing Polish, 330ml Spray Can 20 Can 350.00 9 Glass Cleaner, Spray Bottle, 500ml 20 Bottle 170.00 10 Feather Duster 12 Piece 150.00 11 Mop, Plastic Handle, Heavy Duty 20 Piece 250.00 12 Pail, At Least 24l 5 Piece 350.00 Page 1 Terms And Conditions 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. 2. Bidders May Quote For Any Or All Of The Items. 3. Price Quotation/s Must Be Valid A Period Of Thirty (30) Calendar Days From The Date Of Submission. 4. Price Quotation/s, To Be Denominated By Philippine Peso Shall Include All Taxes, Duties And Or Levies Payable. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies The Technical Specifications And Other Terms And Conditions Stated Herein. 7. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. 8. The Item/s Shall Be Delivered According To The Requirements In The Technical Specifications. 9. Tesda Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Confirmity To The Technical Specifications. "10. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001) Of The Value Of Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. Tesda Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent ( 10% ) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It." Name Of Business/company Signature Over Printed Name Office Telephone/fax No. Mobile No. E-mail Address Pqf Page 2

Details: Description Quantity Unit Of Issue Description Toiletries Piece 200 Bath Soap, At Least 175 Gram Piece 30 Bathroom Deodorizer, At Least 50 Gram Bottle 80 Body Lotion, At Least 500ml Bottle 200 Cologne For Women, At Least 125ml Pack 20 Cotton Buds, 200's/pack Bottle 20 Feminine Wash, At Least 150ml Pack 100 Hair Conditioner, At Least 11ml, 6's/pack Pack 30 Head Lice Treatment Shampoo, At Least 10ml Piece 30 Mosquito Repellant Lotion, At Least 100ml Bottle 30 Mouthwash, At Least 500ml Pack 350 Sanitary Napkin, Over Night Heavy Flow Dry Wings, 8's/pack Bottle 200 Shampoo, At Least 250ml (for Normal-dry Hair) Janitorial Tin 5 Air Freshener, At Least 320ml Bottle 80 Bleaching Liquid, At Least 1 Liter Bottle 30 Bleaching Liquid, Color Safe, At Least 900ml Piece 10 Broom Stick Pack 60 Detergent Powder Soap, At Least 1kg Piece 50 Dishwashing Paste, At Least 400 Gram Bottle 50 Disinfectant Spray, Type: Aerosol, At Least 510 Gram Bottle 50 Fabric Conditioner, At Least 1 Liter Bottle 50 Furniture Polish (for Wood), At Least 330ml Bottle 20 Glass Cleaner, At Least 500ml Bottle 60 Insect Spray, At Least 500ml Bar 200 Laundry Bar Soap, At Least 360 Gram Box 10 Match, 10's/box Bottle 50 Muriatic Acid, At Least 1 Liter Pack 10 Plastic Sando Bag, Size: Large, 50's/pack Set 6 Rotating Floor Mop W/bucket Piece 15 Soft Broom, Durable Piece 30 Sponge With Scrub Piece 30 Steel Wool Pack 20 Tissue Paper, 3 Ply, 100% Recycled, 12's/pack Bottle 50 Toilet Bowl Cleaner, At Least 900ml Set 30 Toilet Brush With Holder Terms And Conditions: Drop Off Area: Hfg - Brgy. Pungtod, Cabatuan, Iloilo. *please Refer To The Attached Delivery Details For The Quantity To Be Delivered Per Quarter And The Preferred Flavor/color Of The Center. *the Date Of Delivery For The 1st Quarter Should Be Done On January 27 Or Within 15 Days Upon Receipt Of The Purchase Order And For The 2nd Quarter Should Be The First Week Of April 2025. *upon Inspection Damaged/expired Goods Will Not Be Accepted By The End-user. *the Supplier Should Inform The Center In Charge Five (5) Working Days In Order To Ready The Storage Area. *all Goods Should Be In Good Condition Upon Delivery. ***procurement Short Of Award*** ***notice Of Award Will Be Issued Once Funds Are Available*** **nothing Follows**

Details: Description Purpose : Supply And Delivery Of Office Supplies And Equipment Needed For Cpdo. Lot. I Information And Communication Technology Equipment 1 Printer 5 In 1, Print, Scan, Copy, Fax With Adf, Method On-demand Inkjet (piezoelectric) Printer Language: Esc/p-r, Esc/p Rester Nozzle Configuartion: 180 X 1 Nozzles Black, 59 X 1 Nozzles Per Colour (cyan, Magenta, Yellow)maximum Resolution: 5760 X 1440 Dpi Automatic 2 Sided 2 Unit 18,187.50 [ ] [ ] A4, Cis 2 "printer A3, Large Format Printer Printer Type: Inkjet, Ink Tank Functions: Print, Scan, & Copy Print Speed: At Least 38ppm/24ppm (b/c) A4 At Least 3.5ipm/2.3 Ipm (b/c) A3 Duplex Printer: Yes Paper Size : A3, Max. Interface : Usb Network: Lanb + Wifi Inclusions: Starter Set Consumables + Maintenance Box Resetter Extra : 5 Bottles Black Consumables Warranty: One Year!" 1 Unit 43,000.00 [ ] [ ] A3, Cis 3 Ip Phone, Features: 8 Lines, 4 Sips Account, 4 Xml Programmable Context-sensitive Soft Keys, Dual Switched, Auto-sensing Gigabit Ports, Built-in Poe, 32 Digitally Programmable And Customizable Blf/speed-dial Keys, Built-in Bluetooth For Syncing Headsets And Mobile Devices For Contact Books, Calendars & Call Transferring, Hd Audio On The Handset And Speakerphone; Full Duplex Speakerphone, 4-way Audio Conferencing For Easy Conference Calls, With Warranty 1 Unit 10,000.00 [ ] [ ] 4 Global Positioning System (gps), Touchscreen 4" Tft 65k Color Ipx7 Rating, Maps & Memory Sensors: Gps, Glonass, Compass Gps Compass, Barometric Altimeter 1 Unit 40,000.00 [ ] [ ] Lot. Iii Other Supplies 5 "water Dispenser, Free Standing Water Dispenser Bottom Loading Hot, Normal And Cold Water Fast Cooling Low Noise Input Voltage: 230v Heating: 500w Cooling: 85w Dimension: 310x3060x1035mm" 1 Unit 15,000.00 [ ] [ ] Lot. Iv Furniture, Fixtures And Equipment 6 Visitors Chair, Black Metal Frame, Leatherette Covered Foam Seat And Back. Dimension: Seat : W - 19.5", L - 19.5", Back: W - 19", H - 22". Please See Sample Unit At The Cpdo. 2 Unit 5,000.00 [ ] [ ] ***nothing Follows*** ( Supplier Must Provide Complete Data For The Information Required Below ) Delivery Period Warranty Place Of Delivery Signature Over Printed Name Designation Name Of Business Address Telephone/mobile/fax No Email Address

Details: The Tender Documentation For This Opportunity Is Accessible (until The Expression Of Interest Period Closes), See Below For Further Details. An Espo National Framework For The Design, Supply, Delivery, Installation, Maintenance And Inspection Of Outdoor Playground Equipment, Outdoor Fitness Equipment, Skate/bmx Parks, Parkour, Multi Use Games Areas, Water Play Areas And Sports Areas Including Associated Services Such As Landscaping, Fencing And Outdoor Furniture. Delivery And Installation Is Direct To Customers' Sites. Lot 1 - Playground Equipment Lot 2 - Bespoke Design Playground Equipment / Play Areas Lot 3.1 - Multi Use Games Area (muga) - Steel - Macadam Surface Lot 3.2 - Multi Use Games Area (muga) - Steel - Synthetic Grass (sand Filled) Lot 3.3 - Multi Use Games Area (muga) - Timber - Macadam Surface Lot 3.4 - Multi Use Games Area (muga) - Timber - Synthetic Grass Lot 4 - Skateparks / Bmx Parks - In-situ Concrete Lot 5 - Other Wheeled Sports Areas - Asphalt Lot 6 - Outdoor Fitness Equipment Lot 7 - Wet Pour Rubber Surfacing Lot 8.1 - Sport And Play Surface - Synthetic Artificial Grass Lot 8.2 - Sport And Play Surface - Needle Punched Carpet Lot 9 - Football - 3rd Generation Synthetic Grass (3g) Pitch Lot 10.1 - Tennis Courts - Macadam Lot 10.2 - Tennis Courts - Synthetic Grass Lot 11 - Indoor Sensory And Soft Play Equipment Lot 12 - Splash / Water Parks Lot 13 - Inspection Reports - Play Equipment, Including Surfacing And Outdoor Sports The Framework Agreement Has The Option To Extend For Up To A Further 24 Months. The Total Estimated Value Stated Includes The Option Period. Espo Shall Monitor The Financial Stability Of The Awarded Suppliers During The Period Of The Framework Agreement By Reference To Credit Rating Agency Reports. Espo Shall Obtain A Credit Score For The Supplier On Or Before The Framework Start Date As A Base Score And Where A Significant Change In The Credit Score Is Identified Over The Life Of The Framework Agreement, Espo Reserves The Right To Investigate The Reasons For This Significant Change. Depending On The Severity Of The Changes, It Will Be At The Sole Discretion Of Espo To Suspend Or Even Permanently Remove The Supplier From The Framework Agreement. Please Ensure That You Access The Itt Event / Activity (activity Summary Screen) For The Tender Documentation Once An Expression Of Interest ('register Interest’) Has Been Completed (the Attached Guide Is Included For Extra Reference Where Required). Note: For Any Questions Relating To The Operation Of The Portal Itself, Procontract, These Should Be Submitted To Proactis, And The Following Links (url's) Can Be Used For This For Supplier Support And System Technical Queries: Https://www.proactis.com/uk/support-login/ Or Via Https://suppliersupport.proactisservicedesk.com/. Otherwise, For Any Questions Relating To The Tender Content, These Should Be Submitted To Espo By Accessing The 'messages' Section (after An Expression Of Interest Has Been Completed).