Fencing Tenders

Details: The Indicative Scope Of Works Covers The Following Elements: 1. Sewerage Network Construction Of Sewerage Network In The Approximate Length Of 9.2 Km Which Will Serve To 3000 Inhabitants In The Following Settlements: Kolašin City Centre, Braće Vujisić (dulovina), Breza And Partly Smailagića Polje And Gornji Pažanj. 2. Water Supply Priority Measures Water Supply Priority Measures Include Services, Supplies And Construction Works To Be Designed, Supplied, Installed And Constructed By The Contractor. - Preparatory Services (operational Gis, Hid Based Hydraulic Model, Leakage Detection For 30 Km Of Network And Detailed Design Of New Elements Including Scada) - Supply, Installation And Commissioning Of Bulk Flowmeters, And Water Meters (400), Establishment Of Dmas And Scada - Works For Upgrade Of The Water Distribution System Hydraulic Configuration. 3. Wastewater Treatment Plant Design And Construction Of Wwtp In Bakovići Settlement - Conventional Activated Sludge Process And Aerobic Sludge Stabilization. Design And Construction Of The Wwtp Shall Include Two Phases: Phase I - 4000 Pe (to Be Constructed): Wastewater Flowrate (including Infiltration) = 765 M³/d (9 L/s); Peak Dry Weather Flow = 57 M³/h (16 L/s); Peak Wet Weather Flow To =109 M³/h. Phase Ii - Additional 2000 Pe (to Be Considered In Design): Wastewater Flowrate (including Infiltration= 1045 M³/d (12 L/s); Peak Dry Weather Flow = 77 M³/h (21 L/s); Peak Wet Weather Flow = 150 M³/h The Proposed Process For Wwtp Includes: Influent Pipe And By-pass Line, Inlet Chamber, Coarse Screens, Fine Screens, Aerated Grit Chamber, Distribution Chamber, Primary Sedimentation, Activated Sludge And Secondary Sedimentation (biological) Treatment, Effluent Control And Measurement Chamber, Discharge Line To The Tara River, Sludge Pumping Station, Sludge Distribution Chamber, Sludge Thickener, Sludge Reed Beds, Drainage Pumping Station, Building For Guard, Laboratory, Blowers, Warehouse, Odour Control, Plant Infrastructure, Fences, Access And Internal Roads With Greenery, Utility Connections: Pressure Effluent Line (dn280, 1870 M); Access Road (2100 M); Power Supply; Water Supply (dn100, 1195 M); Telecom. Works Will Be Implemented According To Fidic Yellow Book (1999 Ed). Total Expected Duration Of The Contract Is 48 Months, Including 12 Months Of Defects Notification Period. The Municipality Of Kolašin Intends To Conduct Open International Procedure For Selection Of Contractor. The Selection Procedure Will Be Conducted Through The Procedure As Specified In The Practical Guide For European Union External Action (prag) And Eib Guide To Procurement (2018). In Case Of Any Conflict The Eib Guide To Procurement Https://www.eib.org/en/publications/guide-to-procurement.htm Will Apply..

Details: Description Republic Of The Philippines Province Of Siquijor Bids & Awards Committee Capitol Building, Siquijor, Siquijor Business Name:_____________________________ Ad. No.: 721-11-2024 Address:___________________________________ Date: November 18,2024 Philgeps Registration Number:_________________________ Personal Canvass (request For Quotation) Quote Your Price And Name Of Each Items As Indicated Below. Partial Bids Are Not Accepted. Bidders Are Responsible For The Timely Return Of Their Quotation. All Quotations Must Be Received Not Later Than The Date And Time Stated Below. Closing Date: November 27,2024 Closing Time: 1:30 Pm Item Qty. Unit Description Unit Price Total No. 1 10 Rolls Interlink, 5ft X 2 X 10 2 4 Rolls Hog Wire 3 4 Pcs Bulb Socket 4 1 Pc Switch 5 2 Pcs Electrical Tape 6 1 Kl U Nails 7 3 Kls Common Nails, No. 2 8 2 Kls Common Nails, No. 3 9 2 Kls Common Nails, No. 4 10 3 Kls Tie Wire 11 250 Pcs Hollow Blocks 12 6 Cubic Sand 13 6 Cubic Gravel 14 20 Sacks Cement 15 13 Pcs Gi Tube, 1 1/2 X 20ft 16 15 Pcs Corrugated Bar, No. 10 17 15 Pcs Corrugated Bar, No. 8 18 1 Pc Mesh Wire 19 5 Boxes Welding Rod 20 2 Pcs Shovel 21 2 Pcs Hammer 22 3 Pcs Marine Plywood, 1/4 23 1 Pc Pallette 24 1 Roll Nylon 25 10 Meters Level Hose 26 1 Pc Hand Saw (wood) 27 1 Pc Hand Saw Frame (metal) X-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x Purpose: Materials For Rehabilitation Of The Perimeter Fence Of 11b Siquijor Tbp. I Hereby Certify That The Above Articles Is Carried In Stock In Quality Above Stated Those Marked "none". Atty. Frances Urmyne P. Imbong Bac Chairman/provincial Legal Officer Jcb Date: Time: _______________________________ (firm Manager Or Representative) Signature Over Printed Name

Details: Amendment 001 This Amendment Is Raised To Extend The Solicitation Closing Date To November 22, 2024. ___________________________________________________________________________________________________ Notice Of Proposed Procurement This Requirement Is For: Department Of National Defence (dnd). This Requirement Is Open Only To Those Supply Arrangement Holders Under E60zt-18tsps Who Qualified Under Tier 1 ($0 - $3.75m) Under The Stated Consultant Category, Security Level, Region, Level Of Expertise For The Following Category: Stream 5. Technical Engineering And Maintenance Services. One (1) Resource In The Following Stream: • One (1) 5.16 Life Cycle Management Specialist (lcms) - Senior. The Requirement Is Intended To Result In The Award Of One (1) Contract. The Following Sa Holders Have Been Invited To Submit A Proposal. 1. 9468269 Canada Corp. 2. Adirondack Information Management Inc., The Aim Group Inc. In Joint Venture 3. Akkodis Canada Inc. 4. Altis Recruitment & Technology Inc. 5. Amyantek Inc 6. Arup Canada Inc. 7. Calian Ltd. 8. Deloitte Inc. 9. Fleetway Inc. 10. Ipss Inc. 11. Lengkeek Vessel Engineering Inc. 12. Norda Stelo Inc. 13. Olav Consulting Corp., Moshwa Aboriginal Information Technology Corporation, In Joint Venture 14. Procom Consultants Group Ltd. 15. Promaxis Systems Inc 16. T.i.7 Inc., The Source Staffing Solutions Inc., In Joint Venture 17. Thomas&schmidt Inc. 18. Tiree Facility Solutions Inc. 19. V42 Management Consulting, Inc. 20. Valcom Consulting Group Inc. However, Sa Holders Not Invited To Bid Who Wish To Do So May, No Later Than Five Days Prior To The Published Closing Date Of The Contract, Contact The Contracting Authority And Request An Invitation To Bid. An Invitation Will Be Issued Unless It Would Interfere With The Proper Functioning Of The Procurement System. Under No Circumstances Will Canada Extend The Solicitation Closing Date To Allow These Suppliers To Bid. Where Additional Solicitations Are Issued As Part Of The Solicitation Process, They May Not Be Considered In Amendments To The Solicitation. Description Of The Requirement: This Bid Solicitation Is Being Issued To Satisfy The Requirement Of The Department Of National Defence (dnd) [the "client'] For The Provision Of One (1) Resource Through The Task And Solutions Professional Service (tsps) Supply Arrangement (sa), Specifically One (1) 5.16 Senior (level 3) Life Cycle Management Specialist (lcms), In Support Of Director Maritime Equipment Program Management (major Surface Combatants) (dmepm(msc)) 3-5. The Contractor Must Provide A Range Of Technical Support To The Ta For Power Generation & Distribution (pg&d) Equipment Fitted On-board The Halifax Class Naval Vessels Such As Updating, Maintaining And Managing These Systems Including But Not Limited To Generators, Uninterruptable Power Supplies (upss), Static Frequency Converters (sfcs), Power Distribution, Electrical Cables Management, Other Related Electrical Equipment. Level Of Security Requirement: There Are Security Requirements Associated With This Requirement: Company Minimum Security Level Required: Secret Resource Minimum Security Level Required: Secret Document Safeguarding Security Level Required: None For More Information On Personnel And Organization Security Screening Or Security Clauses, Bidders Should Refer To Industrial Security And Controlled Goods At Public Services And Procurement Canada - Canada.ca) Website. Applicable Trade Agreements: World Trade Organization Agreement On Government Procurement (wto-agp) Canada-european Union Comprehensive Economic And Trade Agreement (ceta) Canadian Free Trade Agreement (cfta) Canada Korea Free Trade Agreement, (ckfta) Comprehensive And Progressive Agreement For Trans-pacific Partnership (cptpp) Canada – Chile Free Trade Agreement Canada – Colombia Free Trade Agreement Canada – Honduras Free Trade Agreement Canada – Panama Free Trade Agreement Canada – Peru Free Trade Agreement Canada – Ukraine Free Trade Agreement Note To Bidders: Conditional Set-aside Under The Procurement Strategy For Indigenous Business (psib) This Procurement Is Conditionally Set Aside Under The Federal Government Procurement Strategy For Indigenous Business. In Order To Be Considered, The Bidder Must Certify That It Qualifies As An Indigenous Business As Defined Under Psib And That It Will Comply With All Requirements Of Psib. If Bids From Two (2) Or More Indigenous Businesses Are Compliant With The Terms Of The Request For Proposal, The Contracting Authority Will Limit The Competition To Those Indigenous Businesses And Will Not Consider Bids From Any Non-indigenous Businesses That May Have Been Submitted. For More Information On Indigenous Business Requirements Of The Set-aside Program For Indigenous Business, Refer To Annex 9.4 Of The Supply Manual. Associated Documents: The Request For Proposal (rfp) Documents Will Be E-mailed Directly, From The Contracting Authority To The Qualified Supply Arrangement Holders Who Are Being Invited To Bid On This Requirement. Bidders Are Advised That Rfp Documents Are Not Available On The Government Electronic Tendering System (https://canadabuys.canada.ca/en/tender-opportunities). Proposed Period Of Contract: The Proposed Period Of Contract Will Be From Date Of Contract To 31 March 2027 Inclusive, Followed By Up To Four (4) Additional One (1) Year Option Period. Estimated Level Of Effort: The Estimated Level Of Effort Of The Contract Will Be For 240 Days For The Resource File Number: W8482-242486/a Contracting Authority: Loïc Malo, D Mar P 3-3-2-2 E-mail: Dmarp3bidsubmission-domar3soumissiondesoffres@forces.gc.ca Note: The Task And Solutions Professional Services (tsps) Method Of Supply Is Subject To Quarterly Refresh Cycles. If You Wish To Find Out How You Can Be A “qualified Sa Holder”, Please Contact Spts.tsps@tpsgc-pwgsc.gc.ca

Description: Public tender Vob/a landscaping work The existing children's playground in the south of the Solmspark (landscape conservation area) is largely characterized by old trees that are worth protecting. The play area will be fundamentally renovated and is designed for children up to 10 years of age. The following services are planned: Install 20 m of square bars, lay and clear 50 m2 of pressure distribution plates, remove and dispose of 600 m2 of plant-based soil cover, use 15 h of suction excavator, remove and dispose of 5 pieces of play equipment, excavate 115 m3 of soil, dispose of 180 m of soil, install 28 m3 of rough material, install 50 m3 of gravel base layer 0/32, install 70 m of granite paving rows, install 220 m2 of water-borne cover, install 30 m3 of paving rows, install 12 m2 of root bridge, install 140 m2 of water-borne... Make and maintain ceiling Install 30 m2 of drain concrete 8-16 mm Install 78 m3 of wood chips Make 25 m2 of formwork for concrete foundation Install 30 m of concrete block steps as edging Make 50 m2 of plastic fall protection surface Install 15 m of wire mesh fence H = 1.20 m Install 4 pieces of benches Install 1 piece of picnic bench Install 16 pieces of drains Install 1 piece of toddler play tower Install 1 piece of standing seesaw Install 1 piece of multiple swing Install 1 piece of climbing frame Create 240 m2 of vegetation areas Create 240 m2 of herb lawn areas Create 15 m2 of planting areas Plant 30 pieces of individual grasses 1 year of completion maintenance The property can only be accessed from the street ‘Auf Der Insel’, opposite the Evangelical Cyriakus Church (= cul-de-sac and dead-end with no turning facility). Access to the construction site is via a water-bound parking path approximately 3.00-3.50 m wide, access length approximately 150 m, without turning possibility. The Ag expects the tendering company to obtain sufficient information about the construction site before starting the calculation.

Details: Nasa’s Technology Transfer Program Solicits Inquiries From Companies Interested In Obtaining License Rights To Commercialize, Manufacture And Market The Following Technology. License Rights May Be Issued On An Exclusive Or Nonexclusive Basis And May Include Specific Fields Of Use.nasa Provides No Funding In Conjunction With These Potential Licenses. the Technology: nasa Langley Research Center Has Developed A An Assured Safety Net Technology For Uas, Safeguard, That Can Alleviate Hazards With Unmanned Aircraft (ua) Flying Beyond Their Authorized Perimeters And Into No-fly Zones. Safeguard Works By Continuously Detecting A Uas Proximity To Virtual Perimeters Established Around No-fly-zones (i.e., Stay-out Or Stay-in Regions And Altitude Limits), And Taking Action To Guarantee The Perimeters Are Not Breached. The Key To The Design Is Streamlined Functionality That Has Been Formally Verified To Guarantee Detection Of Possible Perimeter Violations. Safeguard Is Applicable To Both Rotary- And Fixed-wing Systems And Substantially Outperforms Embedded Geo-fences In Terms Of Reliably And Dependably Stopping Excursions Into No-fly Zones. Safeguard Has The Potential To Provide A Means To Comply With Pending Regulatory Directives For Geo-limitation For A Burgeoning Uas Industry. safeguard Is An Independent Avionics Equipment That Can Be Easily Ported To Virtually Any Ua. The Current Prototype Weighs Approximately 1 Lb (without Hardware Optimization). The Invention Innovations Include Formally Verified Algorithms To Monitor And Predict Impending Boundary Violations Through Flight Termination Trajectory Estimation. A System Could Be Configured Without Sole Reliance On The Gps To Avoid Known Problems With Gps Inaccuracies And Unavailability. It Can Operate Independent Of The Ua And Any On-board Components, Such As The Autopilot, For Physical And Logical Separation From Non-aviation-grade Systems. The Perimeter Boundaries Are Described Using Polygons, Which Can Approximate Almost Any Shape, And There Are Practically No Limits To The Number Of Shapes And Boundaries. The Algorithms For Establishing The Validity Of A Boundary And For Detecting Proximity To All Defined Boundaries Are Based On Rigorous Mathematical Models That Have Been Formally Verified. Software Required To Operate Cannot Be Licensed From Nasa, The Licensee Must Create And/or Procure Separately. to Express Interest In This Opportunity, Please Submit A License Application Through Nasa’s Automated Technology Licensing Application System (atlas) By Visitinghttps://technology.nasa.gov/patent/lar-tops-244 if You Have Any Questions, Please E-mail Nasa’s Technology Transfer Program Atagency-patent-licensing@mail.nasa.govwith The Title Of This Technology Transfer Opportunity As Listed In This Sam.gov Notice And Your Preferred Contact Information. For More Information About Licensing Other Nasa-developed Technologies, Please Visit The Nasa Technology Transfer Portal Athttps://technology.nasa.gov/ these Responses Are Provided To Members Of Nasa’s Technology Transfer Program For The Purpose Of Promoting Public Awareness Of Nasa-developed Technology Products, And Conducting Preliminary Market Research To Determine Public Interest In And Potential For Future Licensing Opportunities.no Follow-on Procurement Is Expected To Result From Responses To This Notice.

Details: File Number: W8486-259794/a Tier: 1 (< $3.75m) This Requirement Is For The Department Of National Defence (dnd) For The Services Of One (1) Senior Life Cycle Management Specialist Under Stream 5, Technical Engineering And Maintenance Service. The Intent Of This Solicitation Is To Establish One (1) Contract For Two (2) Initial Years, With The Option To Extend The Term Of The Contract By Up To Three (3) One-year Irrevocable Option Periods Under The Same Conditions. This Solicitation Is Only Open To The Below List Of Pre-qualified Suppliers Under The Task And Solutions Professional Services (tsps) (sa) Number E60zt-18tsps. Time Frame Of Delivery: Asap Documents May Be Submitted In Either Official Language Of Canada. Rfp Documents Will Be E-mailed Directly From The Contracting Authority To The Qualified Supply Arrangement Holders Who Are Being Invited To Bid On This Requirement. Bidders Are Advised That The Rfp Documents Are Not Available On The Canadabuys Tender Management Application (https://canadabuys.canada.ca). The Tsps Method Of Supply Is A Result Of A Formal Competitive Process Which Was Established As A Result Of Extensive Consultations With Industry. The Method Of Supply Provides Suppliers With An On-going Opportunity To Become Prequalified For Participation In Future Bidding Opportunities. To Obtain More Information About How To Become A Pre-qualified Supplier For Tsps Please Contact Public Works And Government Services Canada (pwgsc). For General Information On The Various Pwgsc Methods Of Supply, Or To Obtain Specific Information On A Pwgsc Professional Service Method Of Supply, Please Visit Pwgsc's Canadabuys Tender Management Application Website At: Https://canadabuys.canada.ca/en/about-us/news-and-events/transition-canadabuys-tender-management-application#msg List Of Pre-qualified Suppliers : This Requirement Is Open The Following Suppliers Who Qualified Under The Stated Consultant Stream, Security Level, Region And Tier: • 7351933 Canada Inc • 9468269 Canada Corp. • Acf Associates Inc. • Adga Group Consultants Inc. • Adirondack Information Management Inc., The Aim Group Inc. In Joint Venture • Akkodis Canada Inc. • Altis Recruitment & Technology Inc. • Amyantek Inc • Appian Corporation • Calian Ltd. • Deloitte Inc. • Fleetway Inc. • Ipss Inc. • Maverin Business Services Inc. • Maxsys Staffing & Consulting Inc. • Norda Stelo Inc. • Olav Consulting Corp., Moshwa Aboriginal Information Technology Corporation, In Joint Venture • Procom Consultants Group Ltd. • Prologic Systems Ltd. • Promaxis Systems Inc • Protak Consulting Group Inc., Soubliere Interiors Ltd., 2672486 Ontario Inc. In Joint Venture • Reticle Ventures Canada Incorporated • Softsim Technologies Inc. • T.e.s. Contract Services Inc. • T.i.7 Inc., The Source Staffing Solutions Inc., In Joint Venture • Talencity Inc. • Technomics, Incorporated • The Aim Group Inc. • Thomas&schmidt Inc. • Tiree Facility Solutions Inc. • V42 Management Consulting, Inc. • Valcom Consulting Group Inc.

Details: The Project Consists Of A Bundle Of Two (2) Projects: • 240220 - Ric Inmate Yard (280093) – Parent Project • 240234 - Ess Ric Inmate Yard (280100) Separate Purchase Orders Will Be Issued For Each Project. The Request For Proposal Will Be Issued To A Prime Consultant For Both Projects Combined. The Contract Will Be Awarded To One Prime Consultant For Both Projects, With Separate Pos Issued For Each. The Prime Consultant Shall Provide Design And Contract Administration For Both Projects. The Prime Consultant Will Engage The Consultants Noted On ‘appendix C – Schedule A – Prime Consultants Services – 12. General Services Applicable To All Phases – 12.1. Consultant Services’. The Prime Consultant Is Required To Engage A Signage Provider To Supply And Install A New Ontario Builds Signage At Emdc. The Sign Is To Be Designed To The Ontario Builds Standards Provided With This Rfp – “design Guide – Ontario Builds – Dec 2023”.pdf Work Shall Meet All Applicable Codes, Standards, And The Io Design And Commissioning Guidelines. The Consultant Will Prepare And Submit The Building Permit Application During The Design Development Phase (66% Design). The Scope Of Work For Each Project Includes, But Is Not Limited To: 240220 - Ric Inmate Yard (280093) – Parent Project: The Scope Of Work Involves Constructing Two (2) New Inmate Yards, Covering A Total Area Of No More Than 10,000 Sqft, On The Regional Intermittent Centre Grounds (ric) At The Emdc In London, On. Prime Consultant Is Responsible For Designing The Space To Accommodate These New Yards, Which Will Feature Steel Structures, Roofs With Skylights, Access Corridors (fenced To The Yards), Supplemental Lighting, And Connections To Existing Building Systems For Services Such As Stormwater Management, Electrical, And Security. Additionally, The Design Will Include A Basketball Net And Potentially Other Exercise Or Recreational Equipment. The Project Includes Installing A Roof Enclosure System To Provide Inmates With Year-round Access To The Yard, Regardless Of Weather Conditions. Existing Grass Will Be Removed And Replaced With Concrete That Has Sufficient Drainage. The Structure Of The Yards Needs To Be Detached From The Existing Building, Supported By Independent Columns And Structural Systems. 240234 - Ess Ric Inmate Yard (274080): The Scope Includes The Supply, Installation, And Commissioning Of Cctv Cameras, Duress Buttons, Monitors, Intercoms, A Pa System, And Other Electronic Security System (ess) Equipment. The Specific Ess Components Will Be Finalized During The Design Phase Of The Project By The Security Consultant That Will Be Engaged By The Prime Consultant Of The Parent Project 240220. Out Of Scope • Any Work, Repairs Or Improvements On Other Exterior Building Other Than Related To Yards Are Out Of The Scope Of The Project, On The Building’s Exterior Brick Walls, Ric Or Detention Center. • New Sallyport In The Ric. • Mechanical Systems. • Guard Post / Observation Area. • New Storm Water Management System. • Roadwork, Walkways Or Gravel Around The Yard Site. • Push Buttons On Doors And Rubber Flooring. • Indigenous Programming Area. • Doors And Doors Hardwares. • Paid Escort (institution Will Provide Security Escort Officers For The Full Duration Of The Construction Phase Of The Project).

Details: The subject of the execution of the public contract is the realization of a new children's playground with play and fitness elements and an artificial surface and rainwater drainage in Silver and the realization of fencing and retaining walls on the plot of land No. 1899/47 in K.ú. Silver. The subject of Public Procurement is precisely specified in the Work Contract (Annex No. 1 of the Tender Documentation), Project Documentation of the Children's Playground and Rainwater Drainage, Prepared by Ing. Jiří Šedivec, Ič 47704993 A Project Documentation of Fencing and Retaining Walls Prepared by Ing. Michael Hanzlíček, Ič 05189713 (Annex No. 2 of the Tender Documentation).

Description: Amendment 001 This Amendment Is Raised To Conduct The Following Changes In Annex A In The English And French Version Of The Rfp. File Number: W8486-259887/a Notice Of Proposed Procurement The Department Of National Defence Has A Requirement For The Items Detailed Below. The Delivery Is Requested At 25cfsd Montreal And 7cfsd Edmonton By February 28th,2025. Item 1, Gsin: 5330nsn: 5330-01-117-7270 Seal / Joint D'étanchéité P/n Requested: 236629 Nscm/cage: 12603 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 2, Gsin: 5330, Nsn : 5330-01-117-7270 Seal / Joint D'étanchéité P/n Requested: 236629 Nscm/cage: 12603 Quantity: 6 Unit Of Issue: Each To Be Delivered To 7 Cfsd Edmonton, Alberta Item 3, Gsin: 5331, Nsn: 5331- 01-479-8935 O-ring / Joint Torique P/n Requested: 923873.0001 Nscm/cage Zar27 Quantity: 10 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 4, Gsin: 5315, Nsn: 5315- 01-565-1068 Pin,lock / Goupille De Verrouillage P/n Requested: A48638.0100 Nscm/cage U5503 Quantity: 6 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 5, Gsin: 4720, Nsn: 4720- 12-331-5926 Hose,nonmetallic / Tuyau,non Metallique,flexible P/n Requested: 15411 Nscm/cage: Kc3s3 Quantity: 6 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 6, Gsin: 2930, Nsn: 2930- 20-004-4719 Tank,radiator,overflow / Vase D'expansion,radiateur P/n Requested: Ca-72090 Nscm/cage: L1268 Quantity: 8 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 7, Gsin: 2930-, Nsn: 2930- 20-004-4719 Tank,radiator,overflow / Vase D'expansion,radiateur P/n Requested: Ca-72090 Nscm/cage: L1268 Quantity: 4 Unit Of Issue: Each To Be Delivered To 7 Cfsd Edmonton, Alberta Item 8, Gsin: 2530, Nsn: 2530-20-005-9389 Horn Button,vehicle / Bouton,avertisseur De Volant,vehicule P/n Requested: 0047-0104 Nscm/cage: 38490 Quantity: 4 Unit Of Issue: Each To Be Delivered To 7 Cfsd Edmonton, Alberta Item 9, Gsin: 3040, Nsn: 3040- 01-530-1731 Parts Kit,linear Actuating Cylinder Assembly / Rechanges,verin A Action Lineaire P/n Requested: Kitc35-225 Nscm/cage: 38490 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7 Cfsd Edmonton, Alberta Item 10, Gsin: 2940, Nsn: 2940-20-011-7249 Filter Element,intake Air Cleaner / Element Filtrant,filtre A Air,admission P/n Requested: 68690-1 Nscm/cage: 0zlp0 Quantity:7 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 11, Gsin: 2540, Nsn: 2540-20-011-7286 Latch,door,vehicular / Loquet De Porte,vehicule P/n Requested: 771-0070 Nscm/cage: 35342 Unit Of Issue: Each Quantity: 4 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 12, Gsin: 2510,nsn: 2510-20-a0t-7279 Automatic Door Holder - Female / Automatic Door Holder – Female P/n Requested: 711-0049 Nscm/cage: 35342 Quantity: 7 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 13, Gsin: 4730,nsn: 4730- 21-867-0207 Clamp,hose / Collier,tuyau P/n Requested: Hs-36 Nscm/cage: 94223 Quantity: 50 Unit Of Issue: Each To Be Delivered To 7 Cfsd Edmonton, Alberta Item 14, Gsin: 4730,nsn: 4730- 21-867-0207 Clamp,hose / Collier,tuyau P/n Requested: Hs-36 Nscm/cage: 94223 Quantity: 50 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 15, Gsin: 2910, Nsn: 2910- 01-680-9128 Filter Element,fluid / Element Filtrant,fluide P/n Requested: Tmf-05-0 Nscm/cage: 53790 Quantity: 15 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 16, Gsin: 4730, Nsn: 4730- 12-198-6128 Strainer Element,sediment P/n Requested: 0004730035 Nscm/cage: Cn7z7 Quantity: 80 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 17, Gsin: 4730, Nsn: 4730- 12-1986128 Strainer Element,sediment P/n Requested: 0004730035 Nscm/cage: Cn7z7 Quantity: 60 Unit Of Issue: Each To Be Delivered To 7 Cfsd Edmonton, Alberta Item 18, Gsin: 4720, Nsn: 4720- 12-331-5926 Hose,nonmetallic / Tuyau,non Metallique,flexible P/n Requested: 015411 Nscm/cage: Kc3s3 Quantity: 40 Unit Of Issue: Each To Be Delivered To 7 Cfsd Edmonton, Alberta Item 19, Gsin: 2930, Nsn: 2930- 20-001-7573 Cap,filler Opening / Bouchon,orifice De Remplissage P/n Requested: T16 Nscm/cage: L1268 Quantity: 2 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 20, Gsin: 2930, Nsn: 2930- 20-001-7573 Cap,filler Opening / Bouchon,orifice De Remplissage P/n Requested: T16 Nscm/cage: L1268 Quantity: 8 Unit Of Issue: Each To Be Delivered To 7 Cfsd Edmonton, Alberta Item 21, Gsin: 2530, Nsn: 2530-20-001-3656 Rim,wheel,pneumatic Tire / Jante,pneumatique P/n Requested: 44814-c Nscm/cage: 38490 Quantity: 4 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Item 22, Gsin: 5355, Nsn: 5355-21-907-8795 Knob / Bouton De Commande P/n Requested:m8 Nscm/cage: A4857 Quantity: 3 Unit Of Issue: Each To Be Delivered To 25 Cfsd Montreal, Quebec Bidders Proposing An Equivalent Or A Substitute Product Must Indicate The Brand Name And Model And/or Part Number And The Nscm/cage They Are Offering. The Crown Retains The Rights To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada. This Requirement Uses Electronic Receipt Of Bids By E-mail Only. For Details, Please Review The Section Entitled Electronic Submission Of Bids In The Solicitation Document. Bids Must Be Submitted By E-mail Only To: Dlp53bidsreceiving.daat53receptiondessoumissions@forces.gc.ca

Details: Description Republic Of The Philippines Province Of Isabela Municipality Of Dinapigue Invitation To Apply For Eligibility And To Bid Itb No. : 2024 – 11 – 25 (15) The Local Government Unit Of Dinapigue, Isabela Through Its Bids And Awards Committee (bac), Invites All Interested Parties To Apply For Eligibility And To Bid For The Hereunder Project(s): 1. Name Of Project : Construction Of Animal Evacuation Area Phase I (animal Shelter) Location : Brgy. Digumased, Dinapigue, Isabela Approved Budget For The Contract : ₱ 883,414.48 Bid Fee : ₱ 1,000.00 2. Name Of Project : Finishing Of Evacuation Center In All Barangay Location : Brgy. Dibulo, Bucal Sur, Bucal Norte, Dimaluadi, Ayod, Dinapigue, Isabela Approved Budget For The Contract : ₱ 674,863.30 Bid Fee : ₱ 1,000.00 3. Name Of Project : Stone Masonry And Rcpc Leading To Tsunami Evacuation Location : Brgy. Digumased, Dinapigue, Isabela Approved Budget For The Contract : ₱ 1,752,751.35 Bid Fee : ₱ 5,000.00 4. Name Of Project : Improvement Of Emergency Operation Center (mdrrmo Building) Location : Brgy. Digumased, Dinapigue, Isabela Approved Budget For The Contract : ₱ 924,231.27 Bid Fee : ₱ 1,000.00 5. Name Of Project : Greenhouse Water System Installation Location : Brgy. Digumased, Dinapigue, Isabela Approved Budget For The Contract : ₱ 400,000.00 Bid Fee : ₱ 500.00 6. Name Of Project : Repair And Maintenance Of Infra. Asset (perimeter Fence Of Municipal Agriculture Office) Location : Brgy. Digumased, Dinapigue, Isabela Approved Budget For The Contract : ₱ 200,000.00 Bid Fee : ₱ 500.00 7. Name Of Project : Construction Of Outdoor Play Facilities For Daycare Centers In The Municipality Location : Brgy. Digumased, Dibulo, Dimaluade & Ayod Dinapigue, Isabela Approved Budget For The Contract : ₱ 344,000.00 Bid Fee : ₱ 500.00 Interested Bidders May Obtain Information, Secure List Of Bidding Documents Through Its Bids & Awards Committee At The Office Of The Municipal Engineer, Dinapigue, Isabela. Bidding Activity Date & Time Venue Issuance Of Bidding Documents From November 6, 2024 To November 25, 2024, Office Hours Office Of The Municipal Engineer Pre – Bid Conference November 13, 2024, 8:30 Am Office Of The Municipal Engineer Submission & Opening Of Bids November 25, 2024, 8:30 Am Office Of The Municipal Engineer Failure To Follow The Above Mentioned Bidding Activity Instruction Will Be Ground For Disqualification To Attend The Said Bidding. The Local Government Unit Dinapigue, Isabela Reserves All Right To Accept Or Reject Any Bid, To Annul The Biding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Of Bidders. Prospective Bidders Should Have Experience In Undertaking A Similar Project. The Eligibility Check/screening As Well As The Preliminary Examination Bids Shall Use Non- Discretionary “pass/fail” Criteria. Post Qualification Of The Lowest Calculated Bid Shall Be Conducted. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference (s), Evaluation Of The Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of Ra. 9184 And Its Implementing Rules And Regulation (irr). Approved By: (sgd) Jose Mario C. Viernes Chairman, Bids & Awards Committee