Fabrication Tenders

Details: Description Works Includes Demolition Of Old Cabinets, Removed And Replace Old Painting, Fabrication And Installation Of Glass Partition & Door Installation Of Tiles & Plastering, Electrical And Wood Works.

Details: Description 14 February 2025 Invitation To Bid For The Construction Of 2 - Storey Multi-purpose Building At Barangay 108, Caloocan City 1. The City Of Caloocan, Through The 2024 Supplemental Budget No. 17 Approved Under Sangguniang Panlungsod Ordinance No. 1094 S. 2024, Intends To Apply The Sum Of Twenty Million Pesos (₱20,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Construction Of 2 - Storey Multi-purpose Building At Barangay 108, Caloocan City. (general Scope Of Work; General Requirements, Removal Of Structures, Earthworks, Civil Works, Masonry Works, Fabricated Materials, Painting Works, Doors Amd Windows, Ceiling Works, Electrical Works, Plumbing Works, Mechanical Works, Disposal Of Waste Materials). Bids Received In Excess Of The Abc Shall Be Automatically Rejected During The Opening Of Bids 2. The City Of Caloocan Now Invites Contractors With Pcab License And Registration Appropriate To The Project Cost To Bid For The Construction Of 2 - Storey Multi-purpose Building At Barangay 108, Caloocan City. Completion Of Works Is Required Within One Hundred Fifty (150) Calendar Days From The Date Of Receipt Of The Notice To Proceed. Bidders Should Have Completed A Contract Similar To The Project Which Is At Least Fifty Percent (50%) Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From The City Of Caloocan And Inspect The Bidding Documents At The Address Given Below During Office Hours: Bac Secretariat/ Procurement Office Office Of The Bids And Awards Committee 7th Floor Caloocan City Hall 8th St. Cor. 8th Ave. Grace Park, Caloocan City Telephone Number: 5310-2702/8288-8811 Local 2218 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Starting 14 February 2025 From The Address Above And Upon Payment Of Fee For The Bidding Documents In The Amount Of Twenty Five Thousand Pesos (₱25,000.00) It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The City Of Caloocan Will Hold A Pre-bid Conference On 21 February 2025 At 10:00am At The Bids And Awards Committee Conference Room, 3rd Floor Caloocan City Hall, 8th St. Cor. 8th Ave. Grace Park, Caloocan City. 7. Submission Of Bids Shall Be On Or Before 06 March 2025 At 9:30 Am At The Office Of The Bids And Awards Committee Conference Room, 3rd Floor Caloocan City Hall, 8th St. Cor. 8th Ave. Grace Park, Caloocan City. Opening Of Bids Shall Be On The Same Day, 06 March 2025 At 10:00am At The Bids And Awards Committee Conference Room, 3rd Floor Caloocan City Hall, 8th St. Cor. 8th Ave. Grace Park, Caloocan City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Late Bids Shall Not Be Accepted. 8. The City Of Caloocan Reserves The Right To Reject The Bid, Not To Award The Contract Or Declare A Failure Of Bidding At Any Time Prior To Contract Award, Without Thereby Incurring Any Criminal, Civil, Or Administrative Liability, Regardless Of The Outcome Of The Bidding Process. Atty. Christian Niño A. Diaz, Cese Chairman Bids And Awards Committee

Details: Description Republic Of The Philippines Province Of Bukidnon Municipality Of Lantapan Invitation To Bid For Construction Of Water District Multi-purpose Building Phase I (1st Bid) 1. The Local Government Unit Of Lantapan, Through The Capex Intends To Apply The Fourteen Million Three Thousand Three Hundred Six Pesos & 46/100 (php 14,003,306.46) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Water District Multi-purpose Building Phase I Ib # 2025-02-016. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Lantapan Now Invites Bids For The Above Procurement Project. Completion Of The Works Required Is 200 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Local Government Unit Of Lantapan And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 14, 2025 To March 4, 2025 From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos (php 25,000.00). The Procuring Entity Shall Allow The Bidder To Present Personally Its Proof Of Payment For The Fees. 6. The Local Government Unit Of Lantapan Will Hold A Pre-bid Conference On February 20, 2025 At 9:00 O’clock In The Morning At The Municipal Conference Room, Municipal Compound, Poblacion, Lantapan, Bukidnon Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bids And Awards Committee Office At Municipal Conference Room, 2nd Floor Of Municipal Building, Municipal Compound, Poblacion, Lantapan, Bukidnon On Or Before 8:45 A.m. (philippine Standard Time) On March 4, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On March 4, 2025 At 9:00 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. [insert Such Other Necessary Information Deemed Relevant By The Procuring Entity Such As The Use Of A Back-up Data Or Cloud Storage For Large Files Uploaded For Online Bid Submissions] 11. The Local Government Unit Of Lantapan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Jefer Mae B. Macana Bac Secretariat Bac Office, 2/f Municipal Hall Purok 6, Poblacion, Lantapan Bukidnon, Philippines Email Add: Lant.bacsec2024@gmail.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Date Of Issue: February 14, 2025 Engr. Jessell S. Pacturan, C.e. Bac Chairperson   Bill Of Quantities Reference No. : Ib # 2025-02-016 Name Of Project: Construction Of Water District Multi-purpose Building Phase I Location: Babahagon, Poblacion, Lantapan, Bukidnon Abc: Php 14,003,306.42 Item No. Item Description Unit Of Issue Quantity Unit Price Amount 1 Other General Requirements Permits & Clearances Ls 1.00 Project Billboard/signboard Ea 2.00 Occupational Safety And Health Program Ls 1.00 Mobilization/demobilization Ls 1.00 2 Civil, Mecahnical, Electrical And Sanitary/plumbing Works Earthworks Removal Of Structures & Obstruction Ls 1.00 Structure Excavation (common Soil) M3 290.89 Embankment From Structure Excavation (common Soil) M3 158.66 Embankment From Borrow (common Soil) M3 380.14 Gravel Fill M3 38.98 3 Plain And Reinforced Concrete Work Structural Concrete (3000psi, Class A, 28 Days) M3 187.00 Reinforcing Steel (deformed, Grade 40) Kg 16,473.83 Formworks And Falseworks M2 858.38 4 Finishing And Other Civil Works Fabricated Materials Metal Works Ls 1.00 Metal Deck Panel Lm 266.85 Total Total Bid Price In Figure: _____________________________________ Total Bid Price In Words: ______________________________________________ Prepared And Submitted By: ____________________________________________

Details: Description Republic Of The Philippines Department Of Public Works And Highways Aklan District Engineering Office Region Vi Toting Reyes St., Kalibo, Aklan Invitation To Bid For Contract Id No.: 25ga0099 Contract Name: Completion Of Multi-purpose Building, Barangay Bulwang, Numancia, Aklan 1. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan, Through The Fy 2025 Gaa Intends To Apply The Sum Of Php 2,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Contract Id No. 25ga0099 – Completion Of Multi-purpose Building, Barangay Bulwang, Numancia, Aklan. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Completion Of Multi-purpose Building Contract Id No. : 25ga0099 Locations : Barangay Bulwang, Numancia, Aklan Scope Of Works : Completion Of Multi-purpose Building: Installation Of Unglazed Tiles With A Total Area Of 895 Square Meters. Fabrication And Installation Of Stainless Steel Railings With A Total Length Of 238 Meters. Application Of Painting Works On Masonry/concrete With A Total Area Of 2,925 Square Meters For Finishing Works Only. Installation Of Sewer Line And Plumbing Works. Installation Of Two (2) Sets Of Water Closet For Plumbing/sanitary Works Only. Approved Budget For The Contract : P 2,970,000.00 Contract Duration : 120 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enrol In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. Per Gppb Resolution No. 15-2021, Prospective Bidders Are Required To Upload And Maintain Current Of The Following Eligibility Documents In The Philgeps: A. Registration Certification (sec/dti Registration) B. Mayor’s/business Permit Or Its Equivalent Documents C. Tax Clearance D. Pcab License And Registration, And E. Audited Financial Statements Any Expired Document Among The Afore-cited Eligibility Documents Shall Render The Philgeps Platinum Registration Certificate As Automatically Suspended And Its Validity Shall Resume Only Once The Said Expired Document Is Already Updated With The Philgeps. For Recently Mayor’s Permit, The Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Lgu Shall Be Accepted By The Philgeps For The Purpose Of Updating The Philgeps Certificate Of Platinum Registration And Membership. Consequently, The Prospective Bidders Shall Maintain An Updated And Current Philgeps Platinum Registration And Membership In The Civil Works Application (cwa). Prospective Bidders With Expired Eligibility Documents And Have Not Yet Updated Their Record In The Cwa Are Advised To Attached Their Newly Updated Platinum Registration And Membership Certificate, In The Technical Bid Documents And Not The Updated Particular Eligibility “class A” Document, To Be Considered Eligible By The Bids And Awards Committee. Only The Following Documents Are Required From Prospective Bidders Prior The Sale Of Bidding Documents, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary’s Certificate For Corporation/partnership/joint Venture/cooperative) C. Letter Of Intent (for Foreign Funded Projects) 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan And Inspect The Bidding Documents At Bac (conference Room), Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan During Weekdays From 8:00 A.m To 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 14, 2025 – March 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Will Hold A Pre-bid Conference On February 21, 2025 At 10:00 A.m At Bac Conference Room, Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_aklan@dpwh.gov.ph For Electronic Submission On Or Before March 6, 2025 At 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On March 6, 2025 Immediately After The Deadline Of The Submission Of Bids At Bac (conference Room), Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Maria Paula P. Garcia-custodio Oic – Procurement Unit (036) 268-3269 Email Add: Bactwgaklan@gmail.com Electronicbids_aklan@dpwh.gov.ph Ernan I. Bañes Bac Chairperson (036) 268-3269 Email Add: Bactwgaklan@gmail.com Electronicbids_aklan@dpwh.gov.ph

Description: Fabrication, Supply, Transportation, of Steel Parts Of Trail (truss) Bridge Connecting Rauche Sera & Shankhapipal, Bangad Kupinde Municipality-05, Salyan, Tharachauar Suspended Bridge, Bagchaur Municipality-03, Salyan, Chukepakha Mandanda Bhalakhark Suspended Bridge, Bangad Kupinde Municipality-06, Salyan & Kharkhola Thakursamma (sharada River) Suspension Bridge, Kalimati-04, Salyan

Details: Description Items Of Work To Be Done Includes: -site Preparation -excavation (unclassified Materials) -grouted Riprap -canal -curb And Gutter -portland Cement Concrete Pavement -mobilization And Demobilization -fabrication And Installation Of Project Billboard

Details: Description Republic Of The Philippines Department Of Public Works And Highways Aklan District Engineering Office Region Vi Toting Reyes St., Kalibo, Aklan Invitation To Bid For Contract Id No.: 25ga0103 Contract Name: Completion Of Multi-purpose Building, Barangay Tagaroroc, Nabas, Aklan 1. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan, Through The Fy 2025 Gaa Intends To Apply The Sum Of Php 1,980,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Contract Id No. 25ga0103 – Completion Of Multi-purpose Building, Barangay Tagaroroc, Nabas, Aklan. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Completion Of Multi-purpose Building Contract Id No. : 25ga0103 Locations : Barangay Tagaroroc, Nabas, Aklan Scope Of Works : Completion Of A Multi-purpose Building: The Scope Of Works Include The Construction Of Reinforced Concrete Floor Topping For The Existing Covered Court, End Wall Cladding, Flashing And Gutter, Fabrication And Installation Of Ten (10) Units Awning Type Windows With Bottom Metal Cladding, Masonry Works, Plastering And Painting Works, Side Canopy, And Electrical Works (electrical Rough-ins Only). Approved Budget For The Contract : P 1,980,000.00 Contract Duration : 90 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enrol In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. Per Gppb Resolution No. 15-2021, Prospective Bidders Are Required To Upload And Maintain Current Of The Following Eligibility Documents In The Philgeps: A. Registration Certification (sec/dti Registration) B. Mayor’s/business Permit Or Its Equivalent Documents C. Tax Clearance D. Pcab License And Registration, And E. Audited Financial Statements Any Expired Document Among The Afore-cited Eligibility Documents Shall Render The Philgeps Platinum Registration Certificate As Automatically Suspended And Its Validity Shall Resume Only Once The Said Expired Document Is Already Updated With The Philgeps. For Recently Mayor’s Permit, The Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Lgu Shall Be Accepted By The Philgeps For The Purpose Of Updating The Philgeps Certificate Of Platinum Registration And Membership. Consequently, The Prospective Bidders Shall Maintain An Updated And Current Philgeps Platinum Registration And Membership In The Civil Works Application (cwa). Prospective Bidders With Expired Eligibility Documents And Have Not Yet Updated Their Record In The Cwa Are Advised To Attached Their Newly Updated Platinum Registration And Membership Certificate, In The Technical Bid Documents And Not The Updated Particular Eligibility “class A” Document, To Be Considered Eligible By The Bids And Awards Committee. Only The Following Documents Are Required From Prospective Bidders Prior The Sale Of Bidding Documents, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary’s Certificate For Corporation/partnership/joint Venture/cooperative) C. Letter Of Intent (for Foreign Funded Projects) 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan And Inspect The Bidding Documents At Bac (conference Room), Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan During Weekdays From 8:00 A.m To 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 14, 2025 – March 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Will Hold A Pre-bid Conference On February 21, 2025 At 10:00 A.m At Bac Conference Room, Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_aklan@dpwh.gov.ph For Electronic Submission On Or Before March 6, 2025 At 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On March 6, 2025 Immediately After The Deadline Of The Submission Of Bids At Bac (conference Room), Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Maria Paula P. Garcia-custodio Oic – Procurement Unit (036) 268-3269 Email Add: Bactwgaklan@gmail.com Electronicbids_aklan@dpwh.gov.ph Ernan I. Bañes Bac Chairperson (036) 268-3269 Email Add: Bactwgaklan@gmail.com Electronicbids_aklan@dpwh.gov.ph

Details: Description Invitation To Bid The Local Government Unit Of Sindangan, Through Its Bids And Awards Committee (bac), Hereby Invites Suppliers/manufacturers/ Distributors/contractors To Apply For Eligibility And To Bid For The Hereunder Project. Purchase Request No. Project Approved Budget For The Contract Non - Refundable Fees Of Bid Documents 1.) 2025-01- 021 A Purchase & Installation Of Various Equipment For The Establisment Of Lgu Sindangan People's Dialysis Center P23,000,000.00 25,000.00 1 Set Item 1: First Pass Reverse Osmosis System The First Pass Reverse Osmosis System Should Include The Following Components And Specifications: " Ro Pumps: O Quantity: 2 Units (alternating) O Type: 2 Hp Single Phase Reverse Osmosis Multi-stage Vertical Pumps O Operating Pressure: 200 To 250 Psi O Material: High-grade Stainless Steel Construction O Backup Function: 1 Unit Will Function Automatically When The Other Pump Stops.  Membranes: O Quantity: 3 Units O Type: 4040 Thin Film Composite (tfc) Spiral Wound Membranes O Design: Large Spiral Configuration For High Permeate Flow.  Pressure Vessels: O Quantity: 3 Units O Type: 4040 Frp Pressure Membrane Vessel.  Pre-filtration: O Quantity: 1 Unit O Type: 20"" Slim Filter Housing With 5-micron Sediment Filter (clear Housing)." " Aami Standard Compliance: All Components In Contact With Pure Water Must Meet Aami (association For The Advancement Of Medical Instrumentation) Standards.  Flow Meters: O Quantity: 2 Units (panel-mounted) O Range: 0-10 Gpm O Measurement: Percentage Rejection, Percentage Recovery, And Permeate/product Flow.  Additional Flow Meters: O Quantity: 1 Unit (for Recycle Water Flow Monitoring).  Pressure Gauges: O Quantity: 2 Units (dial Type) O Pressure Rating: 350 Psi And 150 Psi O Material: Stainless Steel Construction.  Pressure Regulator Control Valve: O Quantity: 1 Unit O Size: 1” Npt O Material: Stainless Steel 316.  Conductivity Meter:  Quantity: 1 Unit" " Type: Digital Conductivity Meter (tds Meter For First-stage Pure Water Product).  Automatic Control System: Integrated Automatic Control System For Managing The Operation Of The Ro System.  Recycle Valve And Flushing Option: The System Should Be Equipped With A Recycle Valve And An Automatic Flushing Option.  Low-pressure Switch:  Quantity: 1 Unit  Function: Automatically Stops The Ro Pump When Low Pressure Is Detected.  Solenoid Valves:  Automatic Shut-off Solenoid Valve: 1” Npt (manual Bypass In Case Of Malfunction).  Auto Flushing Solenoid Valve: 1/2” Npt.  Skid Frame:  Material: Stainless Steel Full Skid Frame For Mounting All System Components.  Independent Control System: For Monitoring And Controlling The Ro Process.  Sampling Port: Equipped With A Sampling Port For Pure Water Sampling." 1 Set Item 2: Second Pass Reverse Osmosis Unit The Second Pass Reverse Osmosis Unit Should Include The Following Components And Specifications: " Ro Pumps: O Quantity: 2 Units (alternating) O Type: 1.5 Hp Reverse Osmosis Multi-stage Vertical Pumps O Operating Pressure: 200 To 250 Psi O Material: High-grade Stainless Steel Construction O Backup Function: 1 Unit Will Function Automatically When The Other Pump Stops.  Pressure Vessels: O Quantity: 2 Units O Type: 4040 Frp Pressure Membrane Vessel." 1 Set Item 3: Pre-treatment Equipment Specifications The Pre-treatment Equipment Includes The Following Components: " Multi-media Filtration Unit: O Quantity: 1 Unit O Size: 13” X 54” Frp Tank O Media: Pebbles, Silica Sand, Anthracite, And Garnet For 10-20 Micron Removal. O Backwashing Head: Manual/automatic Timer Backwashing Head. O Accessories: Pressure Gauges On The Inlet And Outlet, Valve For Water Sampling, And Emergency Bypass Valve.  Granulated Activated Carbon Filtration Unit: O Quantity: 2 Units O Size: 13” X 54” Frp Tanks O Media: Pebbles, Quartz Sand, And Industrial-grade Activated Carbon. O Backwashing Head: Manual/automatic Timer Backwashing Head." "o Accessories: Pressure Gauges On The Inlet And Outlet, Valve For Water Sampling, And Emergency Bypass Valve.  Water Softener Filtration Unit: O Quantity: 1 Unit O Size: 13” X 54” Frp Tank O Media: Pebbles And Purolite Resin C-100e. O Backwashing Head: Manual/automatic Timer Backwashing Head. O Accessories: Pressure Gauges On The Inlet And Outlet, Valve For Water Sampling, And Emergency Bypass Valve.  Sampling Ports: Sampling Ports For Multi- Media, Carbon,and Water Softener Filters." " Pressure Gauges: Individual Pressure Gauges For Each Filter (multi-media, Carbon, And Water Softener).  Raw Water Tank: O Quantity: 1 Set O Capacity: 1000 Liters O Material: Polyethylene With Float Valve.  Brine Tank: O Quantity: 1 Unit O Capacity: 130 Kg Of Salt O Accessories: Hose And Strainer.  Raw Water Pump System: O Quantity: 2 Units (alternating) O Type: 1.5 Hp Single Phase Raw Water Multi-stage Horizontal Stainless Steel Pump With Automatic Backup Functionality.  Piping: O Material: Schedule 40 Pvc Pipe With Ball Valves And Fittings. O Fittings: Stainless Steel Fittings." 1 Set Item 4: Support/service Maintenance The Following Services Will Be Included For The Support And Maintenance Of The Water Treatment System: " Installation: Complete Installation Of The Water Treatment System With Training For Operation And Maintenance.  Technical Support: Accessibility For Addressing Any Malfunctions Or Technical Problems Within The Warranty Period.  Spare Parts: Availability Of Local Spare Parts For Maintenance.  Service Personnel: Availability Of Service Personnel Within The Warranty Period.  Operator And Technical Manual: Full Set Of Manuals For Operation And Maintenance.  Initial Water Analysis: Complete Initial Water Quality Analysis To Ensure System Suitability." 1 Set Item 5: 5-station Dialyzer Reprocessing System (wall Mounted For Negative Hepa Patient) The Following Specifications Apply To The 5-station Dialyzer Reprocessing System: " Frame Material: Panel Box-type Frame (pvc Material).  Dialyzer Testing Parameters: Max Testing Pressure: 8-14 Psi.  Pressure Regulator Valve: Adjustable Between 15-35 Psi.  Piping And Fittings: Pvc Pipes And Fittings; Chemical-grade Hoses And Fittings.  Chemical Compatibility: System Must Be Compatible With All Types Of Disinfectants.  Chemical Tank: 10 Liters Polyethylene Chemical Tank.  Dialyzer Connectors: 5 Quick-connect Dialyzer Holders.  Chemical Pump: 1 Unit For Chemical Application.  Electrical Control System: Fully Integrated Electrical Control System For Operation." " Solenoid Valves: Ce Certified Stainless Steel Solenoid Valves For Dialyzer Cleaning, Filling Chemicals, And Auto Reverse Ultrafiltration.  Graduated Cylinder: 250 Ml Plastic Graduated Cylinder. Installation & Training:  Full Installation And Training For Operation, Maintenance, And Safety Procedures. Support/service Maintenance:  Installation And Training: Full Setup And Operator Training.  Technical Support: Access To Local Service Personnel During Warranty Period.  Spare Parts Availability: Availability Of Spare Parts Locally During The Warranty Period.  Technical Manual: Full Operator And Technical Manuals." 1 Set Item 6: 2 Station Dialyzer Reprocessing Machine For Positive Hepa Patient "specifications:  Frame Material O Panel Box Type (pvc Materials)  Dialyzer Testing Parameters O 1 Unit Dialyzer Testing Parameters With Maximum Pressure Range: 8-14 Psi  Pressure Regulator Valve O 1 Unit Adjustable Pressure Regulator Valve, Range: 15-35 Psi  Piping And Fittings O Pvc Pipe And Fittings  Chemical Grade Hose And Fittings O Chemical-grade Hose And Fittings For Safe Operation With Disinfectants And Cleaning Solutions." " Compatibility O Machine Is Compatible With Any Type Of Disinfectant Commonly Used In Dialyzer Reprocessing.  Electrical Control System O Integrated Electrical Control System For Efficient Operation. " " Electronic Control Board O 1 Unit Electronic Control Board Designed To Manage Dialyzer Testing Parameters. Solenoid Valves For Dialyzer Cleaning O 2 Pcs Ce Certified Stainless Steel (s/s) Solenoid Valves For Dialyzer Cleaning Procedure.  Solenoid Valves For Chemical Filling  2 Pcs Ce Certified Stainless Steel (s/s) Solenoid Valves For Dialyzer Chemical Filling.  Solenoid Valves For Auto Reverse Ultra Filtrate  2 Pcs Ce Certified Stainless Steel (s/s) Solenoid Valves For Auto Reverse Ultra Filtrate During The Cleaning Cycle." " Programmable Logic Controller (plc)  1 Unit Plc (programmable Logic Controller) With The Following Specifications: O Input: 16 Digital Inputs O Output: 10 Digital Outputs O Voltage: 110-240vac  Secondary Programmable Logic Controller (plc)  1 Unit Secondary Plc With The Following Specifications: O Input: 10 Digital Inputs O Output: 4 Digital Outputs O Voltage: 110-240vac  Illuminated Push Button Switches (rinsing Procedure)  2 Units Of Illuminated Green Push Button Switches (indicating Rinsing Procedure Is Active).  Illuminated Push Button Switches (chemical Filling)  2 Units Of Illuminated Red Push Button Switches (indicating Chemical Filling Is In Progress)." " Diaphragm Type Air Pump  1 Unit Diaphragm-type Air Pump To Provide Necessary Air Pressure For The System.  Plastic Graduated Cylinder  1 Unit 250 Ml Plastic Graduated Cylinder For Accurate Measurement.  Dialyzer Connector  2 Pcs Dialyzer Connectors For Secure And Leak-free Connections During Operation. Support/service Maintenance:  Installation And Training O On-site Installation And Operator Training To Ensure Proper Usage And Maintenance.  Technical Support O Quick Access To Technical Support And Troubleshooting Services During The Warranty Period." " Spare Parts Availability O Local Availability Of Critical Spare Parts To Minimize Downtime.  Service Personnel Availability O Availability Of Trained Service Personnel To Address Any Operational Issues During The Warranty Period.  Operator And Technical Manual O Comprehensive Operator And Technical Manuals Provided For Easy Reference And Proper Maintenance." 2 Sets Item 7: Acid & Bi-carb Mixer Specifications: " 1 Unit Mix Flow Agitator Pump With Propeller  1 Unit Magnet Chemical Pump  1 Unit 100 Liters Polyethylene Conical Tank With Stainless Steel Base  1 Unit 10"" Filter Housing With Micron Filter  Electrical Control System With Panel Box  Pvc Pipe And Fittings Support/service Maintenance:  Installation And Training For Operation And Maintenance.  Accessibility To Address Malfunctions Or Technical Issues Within The Warranty Period.  Availability Of Spare Parts Locally To Minimize Downtime.  Availability Of Service Personnel During The Warranty Period For Prompt Assistance.  Operator And Technical Manual With Detailed Instructions On Operation, Troubleshooting, And Maintenance." 1 Set Item 8: Construction Of Wood Paneling Specifications: " Fabrication Of Wood Paneling Using ¾"" Marine Plywood, Finished With Laminate Formica.  Supply And Installation Of Recirculation Piping System Using Schedule 40 High- Pressure Pipe And Fittings." 1 Set Item 9: Dialyzer Rack Specifications: " Floor-to-ceiling Rack Designed To Hold 110 Dialyzer Units With Secure Storage And Easy Access." 1 Set Item 10: Defibrillator Technical Specifications: " Defibrillator Type: Manual, Synchronized, Asynchronous  Energy Accuracy: ±1%  Energy Selection: 0, 20, 50, 100, 160, 250, 300, 360 Joules (nominal At A Resistance Of 50)  Charging Time: Maximum 10 Seconds To 360 Joules  Standard Adult/pediatric Paddles: Reusable External Adult Paddles (pediatric Paddles Integrated)" "power Requirements:  Ac Power Supply: 100v~240v, 50hz/60hz  Vehicle Voltage (optional): Dc 12v Internal Battery Backup:  Battery Type: Rechargeable Lead-acid Battery (12v 2.0ah X2)  Charging Time: Minimum 4 Hours For Full Charge  Battery Charging: Charged During Ac Power Supply Operation  Charging/low Battery Indication: Red Led  Battery Capacity: 100% Charge Provides 120 Minutes Of Monitoring Or 35 Discharges At 360 Joules. " "display: Lcd Dimensions: 7-inch High-resolution True-color Graphic Display Ecg Features:  Ecg Lead: I, Ii, Iii, Avr, Avl, Avf, V1~v6  S-t Segment Analysis: -2.0mv~+2.0mv  Arrhythmia Analysis: Yes  Protection: Withstands 4000v Ac/50hz Voltage Isolation And Protection Against Electrosurgical Knives And Defibrillation. Respiration:  Measurement Method: Thoracic Impedance Standard Configuration:" " Ecg, Respiration, Defibrillator Monitoring Optional Parameters:  Recorder  Li-ion Battery (11.1v 4ah X2) Support/service Maintenance:  Installation And Training On Device Setup And Use.  Accessibility To Address Malfunctions Or Technical Issues Within The Warranty Period.  Availability Of Spare Parts Locally To Minimize Downtime.  Availability Of Service Personnel Within The Warranty Period For Fast Response And Repairs.  Operator And Technical Manual With Comprehensive Guides For Safe Operation And Maintenance." 15 Sets Item 11: Hemodialysis Machine With Hemodialysis Chairs, Machine Avr & Television Set "the Hemodialysis Machine With Hemodialysis Chairs & Avr Is A High-performance Medical Device Designed To Efficiently Support Various Dialysis Treatments, Including Hemodialysis (hd), Intermittent Ultrafiltration (iuf), Low Flux Continuous Dialysis, High-pressure (hp) Treatments, Plasma Exchange, And Plasma Adsorption. This System Ensures The Safe, Efficient, And Precise Treatment Of Patients With Renal Failure. Key Features: 1. Intelligent Operation:  Lcd Touch Screen: A Multi-angle Rotating Screen With A Multi-language Interface (chinese, English, Etc.), Ensuring Easy Operation And Accessibility.  Guided Operation Interface: Simplifies User Interaction, Providing Step-by-step Guidance For Efficient Machine Operation.  Automated Power On/off & Disinfection: Automatic Settings For Daily Power Cycles And Disinfection Procedures, All Conditions Are Recorded For Traceability.  Automatic Venous Level Detector: Prevents Blood Exposure To Air, Reducing The Risk Of Contamination.  Kt/v Calculation: Monitors Dialysis Efficiency And Ensures Treatment Adequacy.  Substitution Automatic Rinsing: Reduces Hospital Staff Workload And Minimizes Operational Costs." " Automatic Dialyzer Charging & Discharging: Enhances Operational Efficiency And Reduces Manual Labor.  Real-time History Recording: Treatment Parameters, Patient Info, And Running Conditions Can Be Recorded And Retrieved In Real-time For Optimal Monitoring.  Intelligent Maintenance System: Ensures Easy Maintenance And Alerts Users To Any Issues.  Brushless Rotor: Increases System Longevity And Simplifies Maintenance.  Ultrafiltration Clearance: Achieves A 0.1% Accuracy In Ultrafiltration, Improving Dialysis Outcomes.  Three Motor Pump: Ensures Steady, Reliable Fluid Management Throughout The Treatment.  Upgradeable Operating System: The Machine’s Software Can Be Upgraded For Enhanced Functionality. 2. Safety Features:  Individual System Control: Separate Control Of Blood, Hydraulic, And Monitor Systems, Each Equipped With Safety Protocols.  Mandatory Testing: Over Ten Mandatory Tests For Systems Such As Balance, Mixing, Uf, Air Detection, Blood Leakage, Etc., Ensuring Reliable Machine Performance.  Hydraulic And Leakage Monitoring: Ensures Safety During Dehydration Processes And Prevents Leaks.  Ultrasonic & Optical Venous Monitoring: Ensures Safe Blood Return By Detecting Tiny Bubbles." " Led And Audio Alarms: Multi-color Led (red, Yellow, Green) Indicators, Coupled With Various Sound Alarms For Enhanced User-friendliness.  Backup Power Supply: Provides 40 Minutes Of Backup Power In Case Of An Electrical Outage.  Ap, Vp, Tmp Monitoring: Quick Alarm Alerts For Abnormal Pressure Conditions.  Double-stage Endotoxin Filtration: Ensures The Substitution Fluid Meets Aami Standards For Quality.  Advanced Volume Balance Control: Maintains Accurate Ultrafiltration For Precise Patient Treatment.  Dialysate Mixing System: Ensures Accurate Ionic Concentration In The Dialysate For Optimal Treatment.  Integrated Air Detection And Blood Recognition: Detects Even The Smallest Air Bubbles To Prevent Safety Risks. " " Bicarb Fluid: Helps Avoid Microbial Contamination In The B Fluid. 3. Powerful Functionality:  Syringe Support: Includes 10ml, 20ml, 30ml, And 50ml Syringes, Which Are Automatically Recognized And Can Be Self- Tested For Errors. Fully Supports Heparin Profile Management.  Automatic Vital Signs Monitoring: The Machine Automatically Tracks Patient Heart Rate And Blood Pressure During Treatment, Reducing Staff Workload.  Ultra-pure Dialysate Supply: Ensures The Highest Quality Of Dialysis Fluid For Improved Patient Outcomes." " Isolated Hp Mode: Reduces Self-test Time And Minimizes Dialysate Wastage.  Customizable Dialysate Formula: Pre-set And Customizable Dialysate Formulations Are Compatible With A Wide Range Of Solutions Or Powders.  Flexible Dialysis Options: Supports Both Single And Double-needle Dialysis Configurations For Varying Clinical Needs.  Standard And Custom Profiles: Offers Customizable Profiles For Sodium, Uf Rate, Bicarbonate, Heparin Flow, Dialysate Flow, And Temperature, Tailoring Treatment To Individual Patient Needs.  Sequential Dialysis Process: Supports Treatments Such As Sequential Dialysis (hd→iuf) Or High-low Sodium Sequential Dialysis.  Network Usb Integration: Enables Patient Data And Machine Management Through Central Systems." " Central Dialysate Supply Integration: Seamlessly Connects To Centralized Dialysate Supply Systems. Support & Service Maintenance:  Installation And Training: Comprehensive Installation Services, Followed By Operator And Technical Training To Ensure Proper Use And Maintenance Of The Machine.  Warranty And Maintenance: Access To Technical Support For Any Malfunction Or Issues Within The Warranty Period. Local Spare Parts Availability Ensures Minimal Downtime.  Manuals: Detailed Operator And Technical Manuals Are Provided For Ease Of Reference.  Selector Switch For Auto/manual/test Gen  Pilot Lights For Normal And Emergency Conditions" 1 Set Item 12. Pabx / Telephone System " Line Transfer Capability: Supports Transfer From 3 Trunk Lines To 8 Local Lines.  Display: Backlit Lcd Screen For Easy Readability In Various Lighting Conditions.  Audio Features: Hands-free Operation With Full Duplex Functionality For Clear Communication.  Headset Support: Includes Optional Support For Electronic Hook Switch (ehs) Headsets.  Navigation: Features A Cursor And Directory Dial Key For Easy Navigation Through Contacts.  Network Compatibility: Supports 10/100/1g Ethernet For Reliable And High-speed Communication.  Power Options: Power Over Ethernet (poe) Support Or Optional External Power Adapter.  Voip Security: End-to-end Voip Encryption To Secure All Communications.  Mounting: Wall-mountable Design For Space-saving And Flexible Installation. Support/service Maintenance:" " Installation & Training: Comprehensive Installation And User Training Provided To Ensure Optimal System Usage.  Warranty Support: Accessible Support For Troubleshooting And Resolving Technical Issues Within The Warranty Period.  Spare Parts Availability: Local Availability Of Replacement Parts To Minimize Downtime.  Service Personnel: On-site Service Personnel Available Within The Warranty Period For Repairs And Technical Assistance.  Documentation: Detailed Operator And Technical Manuals Included For Ease Of Use And Reference." 1 Set Item 13. Manpower Pooling, Trainings & Seminars " Staff Hiring: Professional Staff Recruitment Services For Laboratory, Dialysis, And Other Essential Healthcare Roles.  Training Programs: O Laboratory & Dialysis Staff: Full- Course Certified Training Program Tailored For Laboratory And Dialysis Personnel, Including Meal Allowances And Accommodation. O Diagnostic Staff: Comprehensive Training For Diagnostic Technicians With Certification, Including Meal Allowances And Accommodation. O Administrative Personnel: Full- Course Certified Training Program For Administrative Staff, With Meal Allowances And Accommodation." "o Administrative Personnel: Full- Course Certified Training Program For Administrative Staff, With Meal Allowances And Accommodation. O Nurses: Full-course Certified Training Program For Nurses, Including Meal Allowances And Accommodation. O Technicians: Certified Technical Training For Medical Equipment Technicians, With Meal Allowances And Accommodation. O Physicians: Full-course Certified Training For Physicians, With Meal Allowances And Accommodation. Each Training Program Is Designed To Ensure Professional Certification And Enhance The Skills Of Healthcare Staff, While Also Providing Full Support For Meals And Accommodation To Ensure A Seamless Learning Experience." 1 Set Item 14. Immunoassay Poct Machine A Compact, Reliable, And High-performance Immunoassay Machine Designed For Point-of-care Testing (poct). Ideal For Rapid Diagnostics, It Ensures High Accuracy And Supports Real-time Testing With Comprehensive Testing Capabilities. Simple Operation And High Throughput Make It Suitable For Various Healthcare Settings, Including Clinics, Hospitals, And Laboratories. "key Features:  Compact And Reliable: Designed For Space Efficiency And Dependable Operation In Busy Environments." " High Accuracy: Equipped With Available Controls And Calibrators To Ensure Precise Results.  Real-time Testing: Provides Immediate Test Results, Enabling Quick Decision- Making.  Simple Operation: User-friendly Interface For Ease Of Use By Healthcare Professionals.  Comprehensive Testing Items: Supports A Wide Range Of Tests, Covering Multiple Aspects Of Patient Health.  High Throughput: Capable Of Processing Large Numbers Of Tests Quickly, Supporting Efficient Workflows." "complete Parameters:  Thyroid Function  Hormones  Cardiac Markers  Inflammation Detection  Renal Function  Digestive Function  Tumor Markers  Allergies  Infectious Diseases  Hba1c, And More. Support/service Maintenance:  Installation And Training: Professional Installation And Operator Training To Ensure Proper Setup And Usage." 1 Set Item 15: Electrolytes Machine "sample Types:  Serum, Plasma, Whole Blood, Cerebrospinal Fluid, Dilute Urine Measuring Speed:  ≤ 25 Seconds Per Test Analysis Method:  Ion Selective Electrode (ise) Sample Volume:  60–150 Μl  200 Μl Sample Capacity:  30 Sample Positions" " 5 Emergency Sample Positions (only For Bke-b/d/f/l Models) Injection Mode:  Manual Or Automatic Injection (only For Bke-b/d/f/l Models)  Manual Injection (for Bke-a/c/e Models) Data Storage:  Up To 50,000 Test Results Printer:  Built-in Thermal Printer Interface:  Rs232 Port For Laboratory Information System (lis) Connectivity Display:  7-inch High-definition Touch Screen Languages Supported:  Chinese And English (other Languages Can Be Customized) Calibration:  Automatic And Manual Calibration Options" "additional Features:  Sample Volume Detection Power Supply:  Ac 110–240v, 50/60hz, 70va Operating Conditions:  Temperature: +10°c To +40°c  Relative Humidity: ≤ 80%  Atmospheric Pressure: 86–106 Kpa Support & Service Maintenance  Installation And Training: Comprehensive Setup And User Training Are Provided.  Technical Support: Access To Support For Any Malfunction Or Technical Issue Within The Warranty Period.  Spare Parts Availability: Spare Parts Are Readily Available Locally.  Service Personnel Availability: Service Technicians Are Available Within The Warranty Period.  Manuals: Operator And Technical Manuals Are Included For Ease Of Use And Maintenance." Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail" Criterion As Specified In The Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The "government Procurement Reform Act". Bids Received In Excess Of The Approved Budget For The Contract (abc) Shall Be Automatically Rejected At Bid Opening. Bid Documents Are Available From February 14, 2025 March 06, 2025 Upon Payment Of Non-refundable Fees Stated Above, From 8:00am To 12:00n And From 1:00pm To 5:00pm, Monday To Friday, And Up To 9:30am On The Last Day Of The Issuance And Acquisition Of Bid Docs, At The Municipal Administrator's Office/bac Secretariat Office, 2nd Fl., Sindangan Municipal Hall (tel. No. (065)224-2750 Or 224-2212). Prospective Bidders Should Have Experience In Undertaking A Similar Project Within The Last Two (2) Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. The Eligibility Check/screening As Well As Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post-qualification Of The Lowest Calculated Bid Shall Be Conducted. The Bac Will Allow A Partial Bid For The Following Items: All Participants Relative To Eligibility Statement And Screening. Bid Security, Performance Security, Pre-bidding Conference(s), Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations (irr). The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1 Issuance Of Bid Document February 14, 2025 8:00 Am 2 Submission Of Bids (deadline) March 06, 2025 9:30 Am 3 Opening Of Bids March 06, 2025 10:00 Am 4 Bid Evaluation March 06, 2025 10:00 Am 5 Post Qualification March 07 2025 10:00 Am 6 Notice Of Award March 10, 2025 10:00 Am "the Local Government Unit Of Sindangan Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders." Approved By: Fletcher C. Fuertes, Mba Bac Chairman

Description: Bulgaria – Miscellaneous Fabricated Products And Related Items – Доставки По Заявки На Хигиенни, Почистващи, Санитарни Материали И Други Артикули За Нуждите На Иа Вквпд По Обособени Позиции

Details: Description Item No. Description Qty. Unit I General Requirements 1.00 Lot Ii Formworks & Scaffoldings 1.00 Lot Iii Carpentry Works 1.00 Lot Iv Doors And Window Glass Fabrication 1.00 Lot V Electrical Works 1.00 Lot Vi Painting Works 1.00 Lot