Earthwork Tenders

Details: The subject of the tender procedure is the completion of the construction which will complement the routes of the Mixed Path for Pedestrians and Cyclists on the territory of the city of Staré Plzeň and connect the already implemented sections of the cycle path from Koterov to Staré Plzeň (branch So 101) and further extend this connection against the flow of the Úslavy River up to Ul. Za Dvorem V Sedlci (branch So 102). The implementation will be according to Pd Solving part of the route, which connects in Zú to the end of the modifications of the already implemented bike path from Koterov, resp. In 2022, the Asphalt Surface of Ul. Kozinova A continues through the open space to the Úslava River, where the road bridge approaches, and along the road embankment on the opposite side of the road Ii/180 returns to the level of the existing footpath on the road Ii/180, where the adjustment for the route of the cycle path to Most Ev. no. 180-014 Across the Úslav River And Both Předmosty. The Proposed Construction Also Includes New Safety Railings On The Bridge, Drainage Design, Earthwork Incl. Accompanying Land Improvements, Additional Protection of Existing Engineering Networks at Crossing Points, Resp. Coincidence With the Proposed Routes and Preparation of the Territory Including the Excavation of Topsoil and the Felling of Non-Forest Woods in the Scope of the Proposed Construction. A part of the construction is also a proposal for traffic signs and a proposal for traffic engineering measures (dio) during the construction period.

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Gen Fund-20% / Dev. Fund, Intend To Apply The Sum Of P 2,336,021.71 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Meat Inspection Quarters, Slaughter House Compound, Merila, Brgy. Ubaldo Laya, Iligan City With Project No. Cb(b)-24-068 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Meat Inspection Quarters, Slaughter House Compound, Merila, Brgy. Ubaldo Laya, Iligan City Scope Of Work: General Requirements: • Installation Of Project Billboard • Occupational Safety And Health Program • Mobilization And Demobilization Earthworks •76.35 Cu.m. Total To Be Excavated, Backfilled And Gravel Bedding,1-1/2" Ø Concrete Works, Formworks And Scaffoldings •21.53 Cu.m.total Of Concrete Works, Formworks & Scaffoldings For Foundation, Floor,smooth Finishing,columns, Slab On Grade, Wall-footing (foundation), Zocalo, Catch Basin Flooring (top & Bottom), & Septic Vault Flooring (top & Bottom); Cutting/bending,installation/fastening Of Rebars Masonry Works •188.88 Sq.m. Total Of Masonry Using 4" X 8" X 16" Concrete Hollow Blocks For Wallings, Wall-footing, Catch Basin, Septic Vault W/ Plaster Finish, Smooth On Expose Areas. Steel Reinforcements •total Of 1657.46 Kg Steel Reinforcement Using 10mm¢, 12mm¢ & 16mm¢ Dsb W/ #16 G.itie Wire Tile Works •total Area Of 6.48 Sq.m Installation Of 600mm X 600mm Non Skid Ceramic Tiles And Pvc Tile Trim For Comfort Room. Ceiling Works •total Area Of 139.91sq.m For Installation Of 4' X 8' X 4.smm Thk. Fcb, 19mm X 50mm X 0.4mm Thk. X 5m Double Furring, Blind Rivets, Concrete Nails And Riveter Paint Works & Finishes •a Total Of 464.15 Sq.m.of Skim Coat, Flat Latex Primer, Red Lead Paint For Steel Works, Baby Roller #4 Mini, Tray Paint, Paint Brush, 2", And Sand Paper For Finishes. Doors & Windows •d1:(5-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 1000mm X 2100mm •d2: (1-panel) Wooden Flush Door On 2" X 6" Wooden Door Jamb W/ Complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 800mm X 2100mm •d3: (1-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm •d4 (1-panel) Flush Door On 2" X 611 Wooden Door Jamb W/complete 'accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm •w1: (3-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On Bothsides On 50mm X 100mm Analok Frame W/complete Accessories (2pcs Of Heavy Duty Flush Lock) - 2500mm X 1200mm •w2: (2-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On 50mm X 100mm Analok Frame W/complete Accessories (1pc Of Heavy Duty Flush Lock)- 1700mm X 1200mm •w3: (1-panels) Awning Window W/ 6mm Thk . Bronze Glass On Upvc Frame W/complete Accessories (2pcs Of Steel Hinge & 1pcs Of Cam Handle Lock - 600mm X 600mm Plumbing Works •installation Of Water Pipe And Waste Pipe •installation Of Faucet And Sink Steel Works •a Total Of 268.07 Sq.m Installation Of 50mm X 50mm X 6m X 6mm Thk. Angle Bar, 38mm X 38mm X 6m X 4.mm Thk. Angle Bar, 25mm X 25mm X 4mm Angle Bar, 25mm X 25mm X 4mm Flat Bar Flat Bar, 2" X 3" X 6m X 1.2mm Thk. C-purlins And Epoxy Primer For All Steel Works. Tinsmithry •a Total Of 144.94 Sq.m. For Installation Of 0.40mm Thk. Pre-painted G.i. Rib-type Roofing, 0.40mm Thk. Plain Pre-fab G.i Sheet Ridge Roll, 0.40mm Thick G.i. Sht. Pre-fab Gutier,1.40mm Thk Pre-fab Colored Fascia Cover, 0.4mm Thk. X 8', Sealant, Teksrew, Blind Rivets, Riveter And Aviation Metal Snip Scissor For The Tinsmithry Work . I. Permits & Clearances (q = 1.00 Lumpsum) Includes Fire Fee, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)-6 Sets Of Plan. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2" X 2"x 8' Coco Lumber, Assorted Sizes C.w Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Earthworks (q = 70.35 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled, Gravel Bedding (1-1/2" Ø). Vi.concrete Works, Formworks And Scaffoldings (q = 21.64 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, 2" X 3" X 10' Sized Coco Lumber, Assorted Sized C.w Nails. Vii. Masonry Works (q = 191.73 Sq.m.) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand. Viii. Steel Reinforcements (q = 1,657.46 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Tile Works (q = 6.48 Sq.m.) Includes 600mm X 600mm Non Skid Ceramic Tiles (a = 6.48 Sq.m), Tile Adhesive (heavy Duty), Tile Grout, Portland Cement, Washed Sand, Pvc Tile Trim (6mm X 2.40m), 4" Ø Cutting Disc. X. Ceiling Works (q = 139.91 Sq.m.) Includes 4' X 8' X 4.5mm Thk. Fcb (a = 139.9125 Sq.m), 19mm X 50mm X 0.4mm Thk. X 5m Double Furring, Blind Rivets (1000pcs/box), Concrete Nails. Xi. Steel Works (q = 268.07 Sq.m.) Includes 50mm X 50mm X 6m X 6mm Thk. Angle Bar- 17pcs, 38mm X 38mm X 6m X 4.mm Thk. Angle Bar- 64pcs, 25mm X 25mm X 4mm Angle Bar - 76 Pcs, 25mm X 25mm X 4mm Flat Bar Flat Bar- Spcs, 2" X 3" X 6m X 1.2mm Thk. C-purlins- 41pcs, Welding Rod (6011), Epoxy Primer, Red Lead Paint, 4" Paint Brush, 4" Ø Cutting Disc, 4" Ø Grinding Disc, Assorted Sand Paper. Xi . Tinsmithry (q = 144.95 Sq.m.) Includes 0.40mm Thk. Pre-painted G.i. Rib-type Rooang, 0.40mm Thk. Plain Pre-fab G.i Sheet Ridge Roll, 0.40mm Thk Pre-fab Colored Fascia Cover (0.4mm Thk. X 8'), Sealant, Teksrew, Blind Rivets (1000pcs/box). Xiii. Paint Works & Finishes (q = 324.24 Sq.m.) Includes Skim Coat (a = 324.24 Sq.m), Flat Latex Primer, Masonry Putty, Top Coat (1st & 2nd Coat), Baby Roller #4 Mini, Tray Paint, Paint Brush (2"), Sand Paper. Xiv. Doors 8t Windows (q = 17.00 Set/s) Includes D1: (5-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 1000mm X 2100mm; D2: (1-panel) Wooden Flush Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 800mm X 2100mm; D3: (1-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm; D4: (1-panel) Flush Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy D Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm; W1: (3-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On Bothsides On 50mm X 100mm Analok Frame W/complete Accessories (2pcs Of Heavy Duty Flush Lock) - 2500mm X 1200mm; W2: (2-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On 50mm X 100mm Analok Frame W/complete Accessories (lpc Of Heavy Duty Flush Lock)- 1700mm X 1200mm; W3: (1-panels) Awning Window W/6mm Thk . Bronze Glass On Upvc Frame W/complete Accessories (2pcs Of Steel Hinge & 1pc Of Cam Handle Lock - 600mm X 600mm. Xv.electrical Works (q = 1.00 Lot) Includes Electric Wire ,2.0mm2( #14awg) Thhn Stranded Copper Wire; Electric Wire ,3.5mm2( #12awg) Thhn Stranded Copper Wire; Electric Wire ,5.5mm2( #12awg) Thhn Stranded Copper Wire; Electric Wire, 8.0mm2( #sawg) Thhn Stranded Copper Wire; Electric Wire, 14.0mm2 (#sawg) Thhn Stranded Copper Wire; Switch, 1gang Switch W/led Set 10a 220v; Switch, 2 Gang Switch W/led Set 10a 220v; Switch, 3 Gang Switch W/led Set 10a 220v; T8 Batten Type Led Tube 18w Daylight 4ft.; Led Bulb 9w, 230v Daylight; Ceiling Receptacle 4"; Duplex Convenience Outlet; Airconditioning Outlet; Electrical Tape 3/4" X20yds; Pvc Conduit Pipe, 1/2x3 Meters; Pvc Conduit Coupling (1/2)dia. ;pvc Conduit Elbow 90deg {1/2)dia.;pvc Clamp 1/2mm (100pc/pack); Pvc Adaptor With Locknut 1/2; Junction Box, Pvc Octagonal W/ Cover 2"x4" Depth Type; Electrical Panelboard 6 Branches Plugin Type; Circuit Breaker 2 Pole 15at ,230v Plugin Type; Circuit Breaker 2 Pole 20at, 230v Plugin Type; Circuit Breaker 2 Pole 30at, 230v Plugin Type; Circuit Breaker 2 Pole 60at, 230v Plugin Type; Utility Box 2"x3" Depth Type; Emt Pipe (20mm) 1/2x3; Secondary Rack With 2 Spool; Service Entrance Cap 20mm. Xvi. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4" Dia. Pvc Sanitary Tee, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" Dia. Pvc Coupling; 4" Dia. Pvc Clean Out W/adapter & Plug; 3" Dia. X 10' Pvc Pipe S-1000; 3" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 3" Dia. Sanitary Wye; 3" Dia. Sanitary Tee; 3" X 2" Dia. Sanitary Tee; 3" Dia. Pvc Clean Out W/adapter & Plug; Pipe Strap/clip (for Downspout Pipe); Bolt {100pcs), Nut (100pcs) And Washer (100pcs); 2" Dia. X 10' Pvc Pipe S-1000; 2" Dia. Pvc Tee; 2" Dia. Pvc P-trap; 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); Pvc Cement, 400cc; 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1/2" Diam. G.i Threaded Pipe Elbow, 90deg.; 1/2" Diam. G.i Threaded Pipe Tee; 1/2" Diam. G.i Threaded Union Patente; Gate Valve-heavy Duty; Check Valve­ Heavy Duty; G.i Basket Strainer; 4" X 4" Stainless Floor Drain; Stainless Double Bowl Kitchen Sink/ Faucet & Flexible Hose-heavy Duty; Water Closet W/complete Fittings/accessories-heavy Duty; Lavatory -heavy Duty; Faucet, W/flexible Hose-heavy Duty(lavatory); Wall Faucet, W/flexible Hose-heavy Duty; Teflon Tape, 3/4" X 10m. Approved Budget For The Contract (abc): P 2,336,021.71 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Seven (107) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: July 2– July 23, 2024 – 8:00 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 2. Pre-bid Conference: July 9, 2024– 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3. Submission Of Bids: July 23, 2024– 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids: July 23, 2024– 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: July 2, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. Cb(b)-24-068 (ceo-infra)

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund Intend To Apply The Sum Of P 2,898,505.28 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City With Project No. Cb(b)-24-128 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City • General Requirements *permits & Clearances; *installation Of Project Billboard,2 Sets; *occupational Safety & Health Program; • Removal Of Structures, Obstructions, Clearing & Grubbing *existing Concrete Structures; *cutting Of Trees •earthworks *excavation For Foundation ,tie Beam, Zocalo, Catch Basin, Wall-footing & Septic Vault; *backfilling & Compaction For The Slab On Grade; *gravel Bedding For Foundation ,slab On Grade, Tie Beam, Zocalo, Wall-footing, Septic Vault, & Catch Basin; • Concrete Works, Forms & Scaffoldings *concrete Pouring For Foundation, Columns, Tie Beam, Roof Beams, Septic Vault Flooring (top & Bot), Zocalo (foundation), Ramp Flooring , Wall-footing (foundation), Slab On Grade, & Catch Basin Flooring (top & Bot); • Masonry Works *installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For Wallings At Ground Floor ,wall-footing , Septic Vault, Catch Basin,& Zocalo, W/plaster Finish,& Smooth On Expose Areas; *using 10mmø X 6m Deformed Steel Bars W/#16 G.i Tie Wire; And Vertical Spaced @600mm O.c & For Horizontal, Every @ 3rd Layer; • Steel Reinforcement *using 10mmø, 12mmø,& 16mmø Deformed Steel Bars W/#16 G.i Tie Wire; • Paint Works & Finishes; *skim Coating & Paint Works For All Wallings And Columns At Ground Floor; •tinsmithry Works *installation Of 0.4mm Thk. Colored Root Long-span Rib Type,0.4mm Thk. Pre-fab Flashing Gutter,0.4mm Thk. Pre-fab Fascia Cover, & 0.30m X 2.40m X 0.4mm Thk . Pre-fab Colored Gutter Spanish Type W/complete Accessories; • Ceiling Works *installation Of 4' X 8' X 4.5mm Thk. Fiber Cement Board (fcb) Including 19mm X 50mm X 0.5mm Thk. Double Furring W/complete Accessories ; • Tile Works *installation Of 300mm X 300mm Non-skid Ceramic Floor Tiles, 300mm X 600mm Ceramic Wall Tiles W/pvc Tile Trim & 600mm X 600mm Floor Tiles; • Doors & Windows *installation Of Pre-fab Wooden Panel Door & Flush Door W/complete Accessories; & Aluminum Glass Door; *installation Of Fixed, Sliding & Awning Glass Window On Aluminum Frame W/complete Accessories; • Electrical Works; *installation Of Electrical Wirings , Connections W/complete Accessories & Fixtures; • Plumbing Works *installation Of Pvc Pipes, Fittings & G.i Pipes; *installation Of G.i Basket Strainer, Pipe Strap/clip W/nut & Washer For 3"ø Pipe (downspout); *installation Of Plumbing Fixtures Such As, Water Closet, Lavatory, Stainless Floor Drain, Stainless Wall Faucet, *installation Of Motor Pump, Water Meter, Check Valve, Gate Valve & Stainless Handrail Grab-bar; • Steel Works *fabrication & Installation Of 2" X 6" X 1.20mm Thk. Channel For Steel Trusses & Web Members, 1" X 1" X 4.0mm Thk. Angle Bar & 1" X 3.0mm Thk. Flat Bar For Steel Fascia Frame; *installation Of 2" X 4" X 1.0mm Thk. C-purlins W/ 10mmø Sagrods And Installation Also Of 6mm Thk. Base Plate And Must Be Full Weld On Steel Trusses At The Top Of The Column W/4-10mmø Anchor Bolt W/ Nut & Washer To Be Full Weld On Vertical Bars; *installation Of 1-1/2"ø Stainless Steel Pipe Railings- Grade 304 For Ramp Only; *all Steel Works Must Be Coat With Epoxy Primer; I. Permit & Clearances (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)- 6 Sets Of Plans. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 2"x 10' Coco Lumber, 2"x 2"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Removal Of Structures, Obstructions & Clearing & Grubbing (q = 1.00 Lot) Includes Existing Concrete Structures, Cutting Of Trees. Vi. Earthworks (q = 78.01 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled/re-use, Pit Run Soil/earthfill, Gravel Bedding (1-1/2"ø). Vii. Concrete Works, Formworks And Scaffoldings (q = 25.98 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/2" Thk. Ordinary Plywood, Assorted Sized Coco Lumber, Assorted Sized C.w Nails. Viii. Masonry Works (q = 231.21 Sq.m.) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Steel Reinforcements (q = 2,720.67 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, #16 G.i Tie Wire. X. Steel Works (q = 1,027.28 Kg/s) Includes 2" X 6" X 1.20mm Thk. Channel (rafter/truss) - 32pcs, 1" X 1" X 4.0mm Thk. Angle Bar - 18pcs, 1" X 3.0mm Thk. Flat Bar - 8pcs, 2" X 4" X 1.0mm Thk. C-purlins - 36pcs, Sagrods-10mmø X 6mm Dsb- 6pcs, 1-1/2"ø X 6m X 1.2mm Thk. Stainless Steel Pipe- Grade 304, 4' X 8' X 6mm Thk. Mild Steel Plate, 10mmø Anchor Bolt (l-type) W/5% Wastage, Welding Rod (6011), Stainless Welding Rod, Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper. Xi. Tinsmithry ( Q = 127.92 Sq.m.) Includes 0.4mm Thk. Colored Roof Long Span Rib Type, Pre-fab Colored Ridge Roll, 0.4mm Thk. X 8', Pre-fab Colored Flashing Gutter, 0.4mm Thk. X 8', 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type, Pre-fab Colored Fascia Cover, 0.4mm Thk. X 8', Sealant, Teksrew, Blind Rivets (1000pcs/box), Riveter, Aviation Metal Snip Scissor. Xii. Paint Works & Finishes ( Q = 336.30 Sq.m.) Includes Skim Coat, Neutralizer, Flat Latex Primer, Masonry Putty, Top Coat (1st & 2nd Coat), Baby Roller #4 Mini, Tray Paint, Paint Brush 2", Sand Paper. Xiii . Ceiling Works (q = 80.00 Sq.m.) Includes 4' X 8' X 4.5mm Thk. Fcb, A = 80.00 Sq.m; 19mm X 50mm X 0.5mm Thk. X 5m Double Furring; W-clip; Blind Rivets (1000pcs/box); 1" X 3mm Screw; 300mm X 300mm Wall Exhaust Fan; Concrete Nails; Aviation Metal Snip Scissor; Riveter. Xiv. Tile Works (q = 107.00 Sq.m.) Includes 600mm X 600mm Ceramic Floor Tiles, A= 76.79 Sq.m; 300mm X 300mm Non Skid Ceramic Floor Tiles, A = 6.81 Sq.m; 300mm X 600mm Ceramic Wall Tiles, A = 23.40 Sq.m; Pvc Tile Trim, 6mm X 2.40m; Tile Adhesive, Heavy Duty; Tile Grout; Portland Cement; Washed Sand; Tile Cutter Disc. Xv. Doors & Windows ( Q = 28.00 Set/s) Includes D1: 1-panel, 1000mm X 2100mm Aluminum Push & Pull Glass Door W/complete Accessories; D2: D2: 900mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D3: D3: 800mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D4: 700mm X 2100mm Flush Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 3 Sets Steel Hinges & Heavy Duty Door Knob); Ds: 1000mm X 2100mm Pre Fab Flush Door W/ss Kick Plate & Louver W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Of Steel Hinges & Heavy Duty Lever Type Door Knob); W1: 2-panels, 1200mm X 1600mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W2: 3-panels, 1200mm X 2300mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W3: 4-panels, 1200mm X 3100mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W4: 1-panel, 1100mm X 1200mm Fixed Window W/complete Accessories On Aluminum Frame W/complete Accessories; Ws: 1-panel, 300mm X 300mm Awning Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (2pcs Stainless Hinges & Heavy Duty Cam Handle Lock) Xvi. Electrical Works (q = 1.00 Lot) Includes Service Entrance Cap,1" 1/2 Ø; Emt Pipe,1"1/2 X10'; Secondary Rack W/spool Insulator,2-pole,w/ Screws; Grounding Rod,10ft,1/2", Copper Plated; Ground Clamp, 1/2", Copper Plated; Panel Board Tqd 2-pole Main, 12 Branches 2-pole Tqc, Bolt-on; Moulded Case Circuit Breaker, 150at,2p, 30kaic @ 415vac; Circuit Breaker, 15a,bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 20a, Bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 30a, Bolt-on, 2pole, 220v, 60hz; Grounding Busbar, Copper; Cu Wire, 2.0mm2,thhn/ Thwn-2, Stranded; Cu Wire, 3.5mm2, Thhn/thwn-2, Stranded;cu Wire,;5.5mm2,thhn(thwn-2,;stranded; Cu Wire, 14mm2,thhn(thwn-2, Stranded; Cu Wire, 50mm2,thhn(thwn-2, Stranded; Switch,16a,spst,w/plate,1-gang; Switch, 16a,spst,w/plate, 2-gang; Switch, 16a,spst,w/plate, 3-gang; Duplex Universal Outlet W/ Ground & Shutter Set, 250vac, 15a; Aircon Outlet W/ Ground, 1gang, 20a; Utility Box,4x2x1.5 In, Pvc; Led Panel Light, 40 Watts, 40001m,30x30 Cm,220-240vac; Led Panel Light,72 Watts, 59001m, 120x60 Cm,220-240vac; Led Round Recessed Pinlight Housing W/ Beehive Reflector W/ Glass Cover,e27 Fixture,6"; Led Bulb, Lw,e-27; Junction Box With Cover And Screws,pvc; Pvc Flexible Hose 1/2" X 100 Meters Corrugated Flex Pipe Fire; Pvc Conduit Pipe,15mm Dia X 3m; Solvent Cement 100cc; Assorted Pvc Connectors; Electrical Tape 3/4" X20yds. Xvii. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4" Dia. Pvc Sanitary Tee, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" X 2" Sanitary Tee; 4" Dia. Pvc Clean Out W/adapter & Plug; 3" Dia. X 10' Pvc Pipe S-1000; 3" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 3" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 3" Dia. Pvc Clean Out W/adapter & Plug; 3" X 2" Pvc Sanitary Wye; Pvc Pipe Strap/clip; Bolt (54pcs), Nut (54pcs) And Washer (54pcs); 2" Dia. X 10' Pvc Pipe S-1000; 2" Dia. Pvc Tee; 2" Dia. Pvc Cross Tee; 2" Dia. Pvc P-trap; 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 2" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); Pvc Cement, 400cc; 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1/2" Diam. G.i Threaded Pipe Elbow, 90deg.; 1/2" Diam. G.i Threaded Pipe Tee; 1/2" Diam. G.i Threaded Union Patente; G.i Basket Strainer;4" X 4" Stainless Floor Drain; Water Closet W/complete Fittings/accessories-heavy Duty; Lavatory -heavy Duty; Stainless Water Faucet (for Lavatory), W/complete Accessories-heavy Duty; Wall Faucet, W/complete Accessories-heavy Duty; Stainless Steel Pwd Handrail Grab Bar-grade 304 W/complete Accessories; 1hp Motor Pump, Heavy Duty; Water Meter-heavy Duty; Gate Valve-heavy Duty; Check Valve Heavy Duty; Teflon Tape, 3/4" X 10m. Approved Budget For The Contract (abc): P 2,898,505.28 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Forty (140) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.issuance Of Bid Documents: October 29 – November 19, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2.pre-bid Conference: November 5, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3.submission Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.opening Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 29, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-128 (ceo-infra)

Details: Description Republic Of The Philippines Southern Luzon State University Planning And Development Office Lucban, Quezon Project Title: Installation And Upgrading Of Electrical System At The New Slsu Catanuan Campus Project Location: New Slsu Catanuan Campus, Catanuan Quezon Owner: Southern Luzon State University Mode Of Implemetation: By Contract Scope Of Works I. Electrical Works 1.all Electrical Works Shall Provide All Material And Equipment And Perform All The Works Necessary For The Complete Execution Of The Electrical System Shown On The Electrical Drawings With The Reference To The General Construction Drawing As Herein Specified, Or Both Except As Other Wise Excluding The Generality Of The Foregoing, Shall Include But Not Limited To The Following Principal Items Of The Works. 2.supply And Installation Of Electrical Equipment. construction Of Power House excavation, Layout & Installation Of Pipes And Back Filling wiring And Cable Pooling supply, Installation And Termination Of Wires And Fabricated Outdoor Panels supply, Mounting And Installation Of Transformers 3.connection Of Electrical To The Buildings. 4.all Materials And Equipment To Be Installed Shall Be Approved Quality And Should Be Presented To Southern Luzon State University/representative Engineer For Approval Prior To Installation. 5.all Materials Shall Be New And Shall Be Conform To The Reference Code And Standard. Use Of Materials Shall Furfure Be Governed By The Other Requirements, Imposed On The Specification, Material Shall Be Subjected To Test, If Necessary, For Their Fitness If So Required. Project Title: Installation And Upgrading Of Electrical System At The New Slsu Catanauan Campus Project Location: Slsu Catanauan Campus, Catanauan, Quezon Owner: Southern Luzon State University Project Duration: 90 Calendar Days (except Sunday And Holidays) Subject: Specification Of Materials And Finishes Specification Of Materials And Finishes General all Applicable Provisions Of The Different Divisions Of The Specifications For Each Work Shall Apply For All Items Cited In This Schedule. discrepancy Arising From This Section Of The Contract Documents Must Be Brought To The Attention Of The Owner Or Representative Architect/engineer Whose Decision Shall Be Final. materials Deemed Necessary To Complete The Works But Not Specifically Mentioned In The Specification, Working, Drawing, Or In The Contract Document Shall Be Supplied And Installed Or Applied In A Workmanlike Manner At Prescribe Or Appropriate Locations Following The Standard Practice Of Civil Engineering, National Building Code Of The Philippines And Construction Procedures. all Items With Specified Approved Brand, Manufacturer, Supplier, Fabricator, Trademark And The Like Shall Be Strictly Followed. the Contractor Shall Coordinate The Work With The Project Management Office To Expedite The Implementation Of The Project, Most Specially, During The Milestones Of The Project. the Contractor Shall Supply All Finishing Accessories And Furnishing Fixtures As May Be Approved By The Power Or Representative And Shall Be Installed By The Contractor Whenever Required By The Owner Or Representative. all Works Must Be Done Within The Timeline Calendar Days Given Except For Sundays And Holidays. Interpretation Of Contract A.in Case Of Conflict Between The Provisions Of The Agreement Or Of Any Contract Document, Or Between The Provisions Of One Of The Contract Documents And The Provisions Of Another Contract Document, Or In Case Of Discrepancy, Defective Description, Error Or Omission In The Contract, The Following Rules Shall Be Followed: Rule 1: The Agreement And The Contract Documents Shall Be Taken As Mutually Explanatory Of One Another. The Various Provisions Of The Contract Shall Be Interpreted Together, Attributing To The 5 Doubtful Ones That Sense Which May Result From All Of Them Taken Jointly. Rule 2: The Provisions Of The Civil Code Of The Philippines On The Interpretation Of Contracts And Of The Rules Of Court On The Interpretation Of Documents Shall Be Applied. Rule 3: Where The Conflict Between Or Among The Provisions Of The Agreement And/or The Contract Documents Cannot Be Resolved By Rules 1 And 2, It Shall Be Understood That: A. The Detailed Drawings Shall Prevail Over The General Drawings; B. Words And Figures Shall Prevail Over The Drawings; C. Words Shall Prevail Over Figures In Contract Documents; D. Written Dimensions Shall Prevail Over Measured Dimensions. Rule 4: Where The Conflict Cannot Be Resolved By Applying Rule 3 Or Where Rule 3 Does Not Apply, The Conflict Shall Be Resolved By Giving Precedence To The Agreement Or To Provisions Of A Contract Document Higher In Order Of Priority Among The Various Documents Which Comprise The Contract. The Order Of Priority Among These Documents Shall Be As Follows: E. Agreement As Modified By Notice Of Award Of Contract, If Such Be The Case, And The Contractor's Conformity Thereto: F. Instruction To Bidders And Any Amendment Thereto; G. Addenda To Bid Documents; H. Specifications; I. Drawings; J. Special Conditions Of Contract; K. General Conditions Of Contract; L. Ther Contract Documents; And M. Other Documents Forming Part Of The Contract Attached Thereto Or Incorporated Therein By Reference. Where The Order Of Precedence Is Modified In The Agreement, Such Modified Order Of Precedence Shall Be Followed; However, The Mere Listing Of Contract Documents In The Agreement Or Any Contract Document Shall Not Be Interpreted As Establishing An Order Of Precedence Among Them. Rule 5: Where There Is Discrepancy, Defective Description, Error Or Omission In Any Contract Document, The Contract Documents Shall Be Interpreted As Being Complementary To Each Other. Thus, What Is Called For In One Contract Document, Although Not Mentioned In Another Contract Document Where It Should Have Been Mentioned, Shall Be Deemed To Be Called For By The Contract. Rule 6: The Apparent Silence Of The Drawings, Specifications Or Any Other Contract Document As To Any Detail, Or The Lack Of Detailed Description Concerning Any Part Of The Work, Shall Be Understood To Mean That Good And Accepted Construction Practice In Accordance With The Usage Or Custom Of The Place Shall Be Followed. Rule 7: Rules 1 To 6 Shall Yield To Specific Rules Of Interpretation In This Document Or In The Contract. B. The Owner Shall Resolve The Conflict, Or Interpret Or Explain Such Discrepancy, Defective Description, Error Or Omission. C. The Interpretation Of Or Explanation By The Owner Shall Be Issued In The Form Of Instructions To The Contractor. Where The Owner Fails To Issue The Instruction In Writing, The Execution Of That Part Of Work Affected By The Interpretation Or Explanation Without A Timely Objection Or Protest Of The Owner Shall Be Deemed To Have Been Executed In Accordance With The Owner's Explanation Or Interpretation. D. In All Cases Where A Device, Item Or Part Of Equipment Is Referred To In The Singular Number, It Is Intended That Such Reference Shall Apply To As Many Such Devices, Items, Or Parts As Are Required To Complete The Work. I. Mobilization/demobilization mobilization Shall Include All Activities And Associated Costs For Transportation Of Contractor’s Personnel, Equipment, And Operating Supplies To The Site; Establishment Of Temporary Field Offices, And Other Necessary General Facilities For The Contractor’s Operations At The Site; Premiums Paid For Performance And Payment Bonds, Including Co-insurance And Re-insurance Agreements As Applicable. demobilization Shall Include All Activities And Costs For Transportation Of Personnel, Equipment, And Supplies Not Required Or Included In The Contract From The Site; Including The Disassembly, Removal And The Site Cleanup Of Temporary Offices And Other Facilities Assembled On The Site Specifically For This Contract. Ii. Earthworks  Earth Fill/backfill – Excavation Shall Be Backfilled And Filling Materials Shall Be Made In Layers Not To Exceed 15 Centimeters And Thoroughly Tamped Before The Next Fill Is Placed. gravel Bedding –all Gravel Bedding Shall Be Tamped By A Plate Compactor Or Any Tampering Equipment To Make It Compact. demolition Of Old Structure – All Existing Structure Within The Site Of Construction Shall Be Demolished And All The Debris And Material Shall Be Placed Where The Slsu Project Engineer Instructed. compaction And Grading – All Exterior Grades And Compaction Shall Be Formed In Accordance With The Drawings And Specifications. excavation – The Contractor Shall Make All Necessary Excavation For Foundations, Footing Tie Beam To Establish Grades Indicated In The Drawings And Plans. 1.implementing And Adequate Method Of Excavation, And Adhering To Safe Work Sequences And Proper Standards Of Workmanship In Connection Therewith. 2.providing Adequate Protection Of All Excavation From Collapse And Subsidence Of Adjacent Ground And Properties. 3.the Safety And Integrity Of The Adjacent Properties Of The Permanent Works. 4.all Concrete Works Shall Have A Minimum Of 4” Or 100mm Thick Of Gravel Bedding Or As Planned. Site Clearing And Hauling this Specification Is To Be Read In Conjunction With The Conditions Of Contract, Scope Of Work And Drawings. Where Works Are Ordered To Be Performed By The Contractor, But Are Not Specified In The Specification, The Contractor, Must Carry Them Out With Full Diligence And Expedience As Are Expected For Works Of That Nature. as Prior To The Construction Of The Project, Necessary Clearing And Grading Shall Be Done By The Contractor. Iii. Reinforced Concrete Works cement Shall Conform To Portland Cement Astm C150 concrete Aggregates Shall Conform To Astm C33 Except The Aggregates Failing To Meet These Specifications But Which Have Produced Concrete To Adequate Strength And Durability May Be Used To The Approval Of The Civil Engineer. water Used In Mixing Concrete Shall Be Clean And Free From Injurious Amounts Of Oil, Acids, Alkalis, Salts, Organic Materials Or Other Substances Deleterious To Concrete Or Steel. In Addition, The Mixing Water For Pre Stressed Concrete Shall Not Contain Deleterious Amounts Of Chloride Ion. reinforcing Bars Shall Conform To Astm A615 reinforcing Bars Shall Be Stored In Such A Manner To Prevent And Lessen Rusting And Deterioration Or Intrusion Of Foreign Matter. admixtures To Be Used In Concrete Shall Be Subject To Prior Approval By The Structural Engineer. cement And Aggregates Shall Be Stored In Such A Manner As To Prevent Their Deterioration Or The Intrusion Of Foreign Matter. concrete Cylinder Samples For Strength Tests Of Each Class Of Concrete Shall Be Taken In Min Of 3 Concrete Samples. The Cylinder Samples For Strength Test Shall Be Taken Cured And Tested In Accordance With Astm C172, Astm C31 And Astm C39. Acceptance Of Concrete concrete Poured Will Be Considered Satisfactory If The Average Of All Set Of These Consecutive Strength Test Results Equal Or Exceeds The Required Fc' And Not Individual Strength Test Falls Below The Required Fc' By More Than 4000 Psi. Core Test And Load Test if Individual Tests Of Laboratory Cured Cylinder Samples Produced Strength More Than 400 Psi Below Fc' Core Test And Or Load Tests May Be Restored Subject To The Approval By The Civil Engineer. Mixing Of Concrete all Concrete Shall Be Mixed Until There In Uniform Distribution Of The Materials And Shall Be Discharges Completely Before The Mixer Is Recharged. Conveying Of Concrete concrete Shall Be Conveyed From The Mixer To The Place Of Final Deposit By Methods That Will Prevent The Separation Or Loss Of Materials Depositing Of Concrete concrete Shall Be Deposited As Nearly As Practicable In Its Final Position To Avoid Segregation Due To Re Handling Or Flowing. Curing concrete Shall Be Maintained In A Moist Condition For At Least 7 Days After Placing. Iv. Masonry Works unless Otherwise Specified, The Vertical Reinforcement Shall Be 10mm Dia At 600mm O.c For All Thickness And Horizontal Reinforcements For Chb Shall Be 10mm At Every 3 Layer Of Chb. Lap Splices Shall Be 300 Long (minimum). chb Of Good Quality Shall Be Use To Ensure Strength Of Walls plastering Of Walls Shall Not Be Less Than 15mm And Not To Exceed 32mm. Must Be Smooth Finished. V. Form Works And Scaffoldings all Formworks Shall Be Formed, That Columns And Beams, And All Other Structure That Needs Form Work, With Quality To Ensure Smooth Concrete Pours. ensure Strength And Safety In Supports And Scaffolding. Vi. Steel, Trusses And Roofing Works fabrication Of Steel Trusses, Installation Of Roof Frame, Pre-painted Ribbed Type Roof, Cap Flashing, Gutter And Other Roof Accessories. painting Of Steel Trusses And Framing. weld All Shop Assembled Connections Continuous Without Undercut And Or Distortion Of Handrails grind And Or Dress Exposed Welds Smooth And Flush To Corner Or Fillet Without Weakening Connection. lightly Sand And Blend With Fine Grit Paper All Light Scratches Prior To Finishing. splices And Expansion Joints Shall Utilize Internal Splice Connectors With Set Screws To Allow For Expansion Over Ambient Temperature Change. Vii. Electrical Works all Works Shall Be In Accordance With The Governing Codes And Regulations Of The Latest Edition Of The Philippine Electrical Code, With The Rules And Regulations Of The National And Local Authorities Concerned In Enforcement Of Electrical Laws And Ordinance And With The Rules And Regulation Of The Utility Companies Concerned. contractor Shall Furnish All Labor, Equipment And Materials As May Be Approved By The Owner Or His/her Representative And Shall Perform All Operations With Electrical System Shown In The Drawings, Their Test And Inspection Complete In Accordance With Specifications And Drawings And Subject To Terms And Conditions Of The Contract And Materials Not Specifically Mentioned To Bring The Electrical System To Operating Condition And Ready For Use By The Owner. electrical Materials Shall Be As Specified In The Electrical Drawing Details As Shown In The Plans And Bill Of Quantities. custom Built Main Distribution Panel Board (mdlp & Mdpp) Shall Be Nema-1 Enclosure In Semi-flushed Wall Mounted. All Panels Shall Be Finished In Light Gray Enamel (ansi # 61) Over A Rush Inhibitor. all Lighting And Power Panels Shall Be Nema-1 Enclosure With Three-phase Main Circuit Breaker, 3 Poles And/or Single Phase 2 Poles Circuit Breaker In The Branch Circuits As Detailed In Drawing. Use Only One (1) Brand Of Circuit Breaker. Preferred Brand Of Circuit Breakers Is Schneider Electric, Abb, Fuji, G.e. Or Their Equivalent In Quality. all Wires And Cables Shall Comply With The Requirements Of The Underwriter’s Laboratories, The Astm And Ipcea As They Apply In The Particular. wires And Cables For Lighting, Power And Auxiliary Systems Shall Be Nylon, Jacketed, Plastic Insulated For 600 Volts Working Pressure, Type Thhn/thwn Unless Otherwise Noted. Type Tw, Colored White For Grinding. Feeder Cable Shall Be Type Thw-2. for Lighting System, No Wire Smaller Than 3.5 Mm2 Thhn/thwn Shall Be Used For Homerun Circuit. Branch Tap To Lighting Fixture/outlet And Switch Wire Can Be 2.0mm2 Thhn/thwn. for Power System, No Wire Smaller Than 3.5 Mm2 Thhn Shall Be Used. Smallest Size Of Grounding Wire 2.0mm2 Tw. all Feeder Cables/wires Shall Be Color Coded And As Manufactured By The Phelps Dodge, Duraflex, Or Approved Equal. A Substitute Of Color Coding Can Be By Properly Identifying Phase Wire With Colored Tape At Each End. 1 Mark Of Red Tape For Line A, 2 Marks Of Yellow Tape For Line B And 3 Marks Of Blue Or Black For Line C. Color Coding Of Wires Are As Follows: 1.1 Line A – Red Ground Wire – White 1.2 Line B – Yellow Line C – Blue Or Black 1.3 Control Wire #01 – Yellow Control Wire #02 – Blue metallic Conduits For Interior And Exterior Systems Shall Be A Standard Weight, Mild, Steel, Hot Dip Galvanized With An Interior Coating As Manufactured By Matsushita, Sumitomo, Mcgill Or Their Approved Equal. Μpvc Nonmetallic Conduits Embedded In Concrete Slabs, Concrete Wall And Partitions Shall Be High-impact Type, Schedule 40 By Emerald Or Approved Equal. no Conduits Shall Be Used In Any System Smaller Than 20mm Diameter, Electric Trade Size, Location And Sizes Of Pull Boxes Shall Be Cleared To The Engineer Prior To Fabrication And Installation. all Materials And Equipment To Be Installed Shall Be Of Approved Quality And Should Be Presented To The Owner For Approval Prior To Installation. other Items Not Mentioned In The Specifications But Are Included In The Installation Shall Be Subjected To Be Pre-approved By The Owner. Viii. Plumbing Works all Plumbing Works Included Herein Shall Be Executed According To The Provisions Of The National Plumbing Code, National Building Code And The Rules And Regulations Of The City/province. use Ppr Pipes And Fittings Of Approved Size And Quality For Water Lines. use Pvc Pipes And Fittings (neltex Or Approved Equivalent) For Sanitary And Sewer Lines. the Drawings Are Not Intended To Show Every Pipe, Fittings, Valves And Appliances. All Such Item Whether Specifically Mentioned Or Not, Or Indicated On The Drawings Shall Be Finished And Installed If Necessary To Complete The System In Accordance With The Best Practice Of The Plumbing Trade And To The Satisfaction Of The Owner/representative. all Materials To Be Used Shall Be New And Shall Conform To The Reference Code And Standards. Use Of Materials Shall Further Be Governed By Other Requirements, Imposed On Other Section Of These Specifications. Materials Shall Be Subject To Test Necessary For Their Fitness If So Required. the Contractor Shall Furnish All Materials, Labor And Equipment Necessary For The Installation Of All Water Lines, And Sewer Lines. all Materials And Equipment To Be Installed Shall Be Of Approved Quality And Should Be Presented To Southern Luzon State University/representative Architect/engineer For Approval Prior To Installation. all Works Shall Be Done Under Direct Supervision Of A Licensed Master Plumber. Ix. Finishing Works Painting Works pressure Clean And Remove Oil, Grease And Loose Foreign Matter, Including, Mold Mildew, Dirt And Corrosion Products, In A Manner Which Causes Neither Undue Damage To The Substrate Nor Damage To, Or Contamination Of, The Surroundings Or The Paint System To Be Applied filling - Fill Cracks And Holes With Fillers, Sealers Or Grouting Cements As Appropriate For The Finishing System And Substrate, And Sand Smooth, To Ensure All Coats Finish Smooth apply Paint And Related Material With An Undercoat Plus Two Coats Of Selected Finish Color Or With The Number Of Coats Specified In Accordance With The Manufacturer's Recommendations. Allow Each Coat To Harden For The Drying Time (or Time Between Coats) Recommended By The Manufacturer. Use Appropriate Paint Type For Interior And Exterior Walls. finish - Ensure Each Coat Of Paint Is Uniform In Color, Gloss, Thickness And Texture And Free Of Runs, Sags, Blisters, Or Other Discontinuities. Doors And Windows use Specified Door Specification And Dimensions As Plan. use Specified Window Specification And Dimensions As Plan. Ceiling construction Of Ceiling In Metal Framing At Classroom, Comfort Room, And Around The Perimeter. all Works Shall Be Done In High Quality To Ensure Quality Finish. materials To Be Use Shall Be Kept Such In A Manner To As To Prevent Their Deterioration Or The Intrusion Of Foreign Matter. spacing Of Screws Shall Be Kept Under Maximum Distances Project Title: Installation And Upgrading Of Electrical System At The New Slsu Catanauan Campus Project Location: Slsu Catanauan Campus, Catanauan, Quezon Owner: Southern Luzon State University Project Duration: 60 Calendar Days (except Sunday And Holidays) Subject: Scope Of Works Scope Of Works I. General Requirements soil Poisoning mobilization And Demobilization. Ii. Earthworks clearing And Hauling compacting And Grading excavation And Backfilling In The Area. excavation Of Required Depth Of Foundation. Iii. Reinforced Concrete Works concreting Of All Structural Elements As Plan, Following Nscp Standard. Iv. Masonry Works laying Of The Concrete Hollow Blocks With Even Textures And Well-defined Edges, All Masonry Works Shall Provide With The 10mm Diameter Reinforcing Steel Bars. masonry Finishes Shall Be Smooth Plaster Finish Unless Otherwise Specified. plastering Of Both Faces Of Walls As Per Standard And Minimum Thickness As Required. finish Shall Be Smooth. V. Formworks And Scaffolding the Work Includes The Construction And Installation Of Formworks And Scaffolding, Fabrication Of Column Forms And Erection Of The Forms And Scaffolding And Dismantling/stripping Of Form Works. Vi. Steel, Trusses And Roofing Works weld All Shop Assembled Connections Continuous Without Undercut And Or Distortion Of Truss grind And Or Dress Exposed Welds Smooth And Flush To Corner Or Fillet Without Weakening Connection. splices And Expansion Joints Shall Utilize Internal Splice Connectors With Set Screws To Allow For Expansion Over Ambient Temperature Change. roofing Materials To Be Installed Shall Be Brand New And Must Conform With Specifications According To Plans Or Approved Equivalent By The Supervising Engineer. Vii. Electrical Works all Electrical Works Shall Provide All Materials And Equipment And Perform All The Works Necessary For The Complete Execution Of The Electrical System Shown On The Electrical Drawings With The Reference To The General Construction Drawings As Herein Specified, Or Both Except As Otherwise Excluding The Generality Of The Foregoing, Shall Include But Not Limited To The Following Principal Items Of The Works. supply And Installation Of Electrical Fixtures. supply And Installation Of Electrical Wire And Cable. supply And Installation Of Electrical Pipe Line. power Supply For The Building Shall Be Connected To The Existing Power House Of The University. all Materials And Equipment To Be Installed Shall Be Approved Quality And Should Be Presented To Southern Luzon State University/representative Engineer For Approval Prior To Installation. all Materials Shall Be New And Shall Conform To The Reference Code And Standard. Use Of Materials Shall Furfure Be Governed By Other Requirements, Imposed On The Specification. Materials Shall Be Subjected To Tests, If Necessary, For Their Fitness If So Required. all Air Conditioning Units Are To Follow. All Outlets Shall Be Supplied And Install. Viii. Plumbing Works all Plumbing Works Included Herein Shall Be Executed According To The Provision Of The National Plumbing Code Of The Philippines, National Building Code And The Rules And Regulation Of The City/province. supply And Installation Of Sewer Pipe Line And Water Drain. construction Of Catch Basin all Materials And Equipment To Be Installed Shall Be Approved Quality And Should Be Presented To Southern Luzon State University/representative Engineer For Approval Prior To Installation. all Materials Shall Be New And Shall Conform To The Reference Code And Standard. Use Of Materials Shall Furfure Be Governed By Other Requirements, Imposed On The Specification. Materials Shall Be Subjected To Test, If Necessary, For Their Fitness If So Required. Ix. General Finishes Paint Works prepare Walls For Painting Using Skim Coats, Etc., Or Equivalent painting Of Interior And Exterior Walls, And Ceiling finish All Doors With High Quality Finish, Varnish Or Equivalent. Ceiling Works supply And Installation Of Ceiling Inside Of Power House And Around The Perimeter. Doors & Windows supply And Installation Of Doors The Plan Specifies. supply And Installation Of Windows The Plan Specifies. Project Title: Installation And Upgrading Of Electrical System At The New Slsu Catanauan Campus Project Location: Slsu Catanauan Campus, Catanauan, Quezon Owner: Southern Luzon State University Project Duration: 60 Calendar Days (except Sunday And Holidays) Subject: Minimum Technical Personnel And Equipment Minimum Technical Personnel And Equipment Quantity Minimum Technical Personnel 1 Site Engineer 1 Foreman 2 Skilled Worker 2 Laborers Quantity Minimum Equipment 1 Unit Bagger Mixer 1 Unit Cut – Off Machine 1 Unit Welding Machine

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00063 : Oo1: Ensure Safe & Reliable National Road System: Network Development Program - Construction Of By-pass And Diversion Roads - Tuguegarao - Enrile Diversion Road (including Tuguegarao - Enrile Bridge And Approaches, Phase 3, Cagayan 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱238,065,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00063: Oo1: Ensure Safe & Reliable National Road System: Network Development Program - Construction Of By-pass And Diversion Roads - Tuguegarao - Enrile Diversion Road (including Tuguegarao - Enrile Bridge And Approaches, Phase 3, Cagayan. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Oo1: Ensure Safe & Reliable National Road System: Network Development Program - Construction Of By-pass And Diversion Roads - Tuguegarao - Enrile Diversion Road (including Tuguegarao - Enrile Bridge And Approaches, Phase 3, Cagayan Contract Id No. : 24b00063 Location : Tuguegarao City And Enrile, Cagayan Brief Project Description : Construction Of Bridge And Approaches, L=1,827.90 M, 8pcs. – 1.60m Ø X 33.20m Bored Piles @ Piers 48-49, 8pcs. – 2.40m Ø X 38m Bored Piles @ Piers 40-43, Column And Coping Of Piers 40 To 44 And 48, 49, Coping Of Pier 47, 120m Length Steel Craneway And 2 Units Platform Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer • Provision Of Furniture /fixtures & Appliances For The Field Office Of The Engineer • Provision Of 4x2 Pickup Type Service Vehicle For The Engineer (rental Basis), Brandnew • Operation And Maintenance Of 4x2 Pickup Type Service Vehicle For The Engineer Other General Requirements • Project Billboard/signboard (dpwh, Coa, Denr) • Occupational Safety And Health Program • Traffic Management • Mobilization/demobilization • Environmental Management And Monitoring Earthworks • Foundation Fill Road/bridge Construction • Steel H-piles (furnished And Driven) • Concrete Piles Cast In Drilled Holes (1.60m And 2.40m) Dia. • Permanent Casing, 12mm Thick (1.60m And 2.40m) Dia. • Pile Integrity Testing (crosshole-sonic And Low Strain) • High Strain Dynamic Testing (p.d.a.) • Structural Steel (furnished, Erected), Grade 36 • Reinforcing Steel Grade (40 And 60), Bridge • Structural Concrete 27.58 Mpa Class A, 28 Days (bridge) • Lean Concrete, Class B, 16.5 Mpa • Bearing Devices, Steel Bearing Approved Budget For The Contract (abc) : ₱238,065,000.00 Contract Duration : 365 Calendar Days Inclusive Of 19 Unworkable/rainy Days, 52 Sundays And Holidays 3. The Major Category Of Work For The Project Is Bcccp - Bridges: Construction-concrete (superstructure) With Cast-in-place Piles. 4. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium B For Bridge. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 5. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 6. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 7. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 8. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 9. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 22 - March 12, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Fifty Thousand Pesos Only (₱50,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 10. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 11. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On February 29, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 12. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 13. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before March 12, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 14. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 15. Bid Opening Shall Be On March 12, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 16. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 3, 2023, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 17. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 18. For Further Information, Please Refer To: Hilario Y. Casem Officer-in-charge, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Editha R. Babaran, Csee Assistant Regional Director Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Email Address: Babaran.editha@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: February 22-28, 2024 Conspicuous Place (procurement Bulletin Board): February 22-28, 2024

Details: Description Invitation To Bid For The Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Installation Of Baloling Solar-powered Irrigation System (spis) In Brgy. Baloling, Mapandan, Pangasinan 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The National Expenditure Program Fy 2024 Intends To Apply The Sum Of Six Million Nine Hundred Twenty-nine Thousand Nine Hundred Ninety-nine Pesos And Sixty Centavos (php6,929,999.60) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Installation Of Baloling Solar-powered Irrigation System (spis) In Brgy. Baloling, Mapandan, Pangasinan With Project Identification Number Da-rfo-1-2024-infra-006. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above Procurement Project With The Following Details And Specifications: Details And Specifications Project Location: Brgy. Baloling, Mapandan, Pangasinan Project Description: Installation Of Spis With A Maximum Pump Discharge Of 1,500 Cu.m./day At 8m Static Head And Total Pipe Length Of 26m Scope Of Work To Be Done: Description Qty Unit I. Mobilization And Demobilization 1.00 L.s. Ii. Access Road 1,020.00 Sq.m. Iii. Provision Of Safety And Health 1.00 L.s. Iv. Construction Of Temporary Facility 1.00 L.s. V. Clearing And Grubbing 300.00 Sq.m. Vi. Earthworks 997.27 Cu.m. Vii. Rsb Works 12,139.84 Kgs. Viii. Form Works 818.61 Sq.m. Ix. Concrete Works 172.33 Cu.m. X. Pv Module And Mounting 19,110.00 Watts Xi. Water Pump 1.00 Unit Xii. Pump Controller/inverter 1.00 Unit Xiii. Iron, Tinsmithry And Carpentry Works 1.00 Lot Xiv. Cable And Electrical Works 1.00 Lot Xv. Distribution Works 27.00 M Xvi. Masonry, Plastering, Painting And Water Proofing Works 55.63 Sq.m. Xvii. Dewatering Works 1.00 Lot Xviii. Doors And Windows 2.29 Sq.m. Xix. Stone Masonry Works 40.62 Cu.m. Xx. Auxiliary Works 1.00 Lot Minimum Technical Personnel Required: • 1 Project Engineer • 1 Foreman • 4 Skilled Workers • 12 Unskilled Workers • 1 Equipment Operator Minimum Equipment Required: • 1 Backhoe 0.75 Cu • 1 Concrete Mixer, One-bagger • 1 Cut-off Machine • 1 Bar Cutter • 1 Hdpe Butt Fusion Machine • 2 Water Pumps • 1 Welding Machine • 1 Acetylene • 1 Generator Set Completion Of The Works Is Within One Hundred Forty (140) Calendar Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours At 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture - Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From December 14, 2023 To January 4, 2024 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 21 December 2023, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 4 January 2024, 3:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 4 January 2024, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization, As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa; C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Requirements May Be Soft-bound/fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed, As Needed, By The Bidder/authorized Representative On Each And Every Page Thereof. E. The Technical Specifications (as Part Of Tab F - Project Requirements), To Be Signed By The Bidder/authorized Representative And Submit During Bid Opening, Of The Unit Offered Must Be Duly Signed/countersigned And Sealed By A Licensed Agricultural And Biosystems Engineer In Accordance With Republic Act 10915, Dated 21 July 2016, Otherwise Known As "philippine Agricultural And Biosystems Engineering Act Of 2016" And Department Of Agriculture (da) Memorandum Order No. 50, Series Of 2020. The Technical Specification Must Be Supported With The Following: O Colored, Clear And Readable Original Copies Of Brochures (in English Language) Of The Offered Goods (pump, Inverter/controller And Solar Module/panel). O Other Technical Specification Requirements: • With Minimum Warranty Of 1 Year On Pump And Controller/inverter, Accessories, And Services • With Minimum Warranty Of 15 Years On Pv Module F. Valid Amtec Test Report For The Pump Is Required. Upon Completion Of The Project The Raed Shall Conduct Acceptance Testing. If The System Fails To Meet The Prescribed Specifications And Performance Standards, The Contractor Shall Institute Corrective Measures For The System To Conform To Specifications And Standards As Requirement For Payment. Otherwise, The Procuring Entity Shall Not Accept The Project And Proceed With The Termination Of Contract On The Ground That The Supplier/ Winning Bidder, Who Is In Default, Fails To Perform Its Obligation Under The Contract. G. The Award Of Contract For Procurement Projects Undertaken Through Epa May Be Made Only Upon The Following Conditions And Shall Be In Accordance With Item 7 Of Appendix 31 Of The 2016 Revised Irr Of Ra 9184: G.1 Approval And Effectivity Of The Funding Sources, To Wit: (i) General Appropriations Act; (ii) Corporate Budget; (iii) Appropriations Ordinance; Or (iv) Loan Agreement In The Case Of Faps; Or G.2 The Reenactment Of The Previous Year’s Budget Which Constitutes The Current Year’s Authorized Budget, When Authorized By The Constitution, Law Or Rules. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Florentino A. Adame, Dvm Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No.:(072) 242/1045-46, Ext. 07 E-mail Add: Darfo1.bacsec1@gmail.com 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ December 12, 2023 Approved By: Florentino A. Adame, Dvm Chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2024-infra-006

Details: Description Invitation To Bid For The Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Installation Of Isic-isic Solar-powered Irrigation System (spis) In Brgy. Isic-isic, Vintar, Ilocos Norte 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The National Expenditure Program Fy 2024 Intends To Apply The Sum Of Six Million Five Hundred Forty-six Thousand Three Hundred Seven Pesos And Seventy-two Centavos (php6,546,307.72) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Installation Of Isic-isic Solar-powered Irrigation System (spis) In Brgy. Isic-isic, Vintar, Ilocos Norte With Project Identification Number Da-rfo-1-2024-infra-014. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above Procurement Project With The Following Details And Specifications: Details And Specifications Project Location: Brgy. Isic-isic, Vintar, Ilocos Norte Project Description: Installation Of Spis With A Maximum Pump Discharge Of 155cu.m./hr And Daily Output Of 1,100 Cu.m/day At 10m Static Head Scope Of Work To Be Done: Description Qty Unit I. Mobilization And Demobilization 1.00 L.s Ii. Access Road 300.00 Sq.m Iii. Provision Of Safety And Health 1.00 L.s Iv. Temporary Facility 12.00 Sq.m V. Clearing And Grubbing 600.00 Sq.m Vi. Earthworks 783.33 Cu.m Vii. Rsb Works 2,476.05 Kgs Viii. Form Works 178.50 Sq.m Ix. Concrete Works 33.32 Cu.m X. Pv Module And Mounting 16,380.00 Watts Xi. Water Pump 1.00 Unit Xii. Pump Controller/inverter 1.00 Unit Xiii. Iron, Tinsmithry And Carpentry Works 1.00 Lot Xiv. Cable And Electrical Works 1.00 Lot Xv. Distribution Works 771.00 M Xvi. Masonry, Painting And Water Proofing Works 54.00 Sq.m Xvii. Dewatering Works 1.00 Lot Xviii. Doors And Windows 2.29 Sq.m Xix. Stone Masonry Works 357.00 Cu.m Xx. Irrigation Works A. Excavation 59.50 Cu.m B. Structural Backfill 28.00 Cu.m C. Rsb Works 1,880.17 Kgs D. Concrete Works (class "a" Without Forms) 21.00 Cu.m E. Concrete Works (class "a" With Forms) 28.00 Cu.m Minimum Technical Personnel Required: • 1 Project Engineer • 1 Foreman • 4 Skilled Workers • 9 Unskilled Workers Minimum Equipment Required: • 1 Backhoe 0.75 Cu. • 1 Concrete Mixer, One-bagger • 1 Cut-off Machine • 1 Bar Cutter • 1 Hdpe Butt Fusion Machine • 2 Water Pumps • 1 Welding Machine • 1 Acetylene • 1 Generator Set Completion Of The Works Is Within One Hundred Sixty-three (163) Calendar Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours At 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture - Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From January 5-25, 2024 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 12 January 2024, 11:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 25 January 2024, 11:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 25 January 2024, 11:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa; C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Requirements May Be Soft-bound/fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed, As Needed, By The Bidder/authorized Representative On Each And Every Page Thereof. E. The Technical Specifications (as Part Of Tab F - Project Requirements), To Be Signed By The Bidder/authorized Representative And Submit During Bid Opening, Of The Unit Offered Must Be Duly Signed/countersigned And Sealed By A Licensed Agricultural And Biosystems Engineer In Accordance With Republic Act 10915, Dated 21 July 2016, Otherwise Known As "philippine Agricultural And Biosystems Engineering Act Of 2016" And Department Of Agriculture (da) Memorandum Order No. 50, Series Of 2020. The Technical Specification Must Be Supported With The Following: O Colored, Clear And Readable Original Copies Of Brochures (in English Language) Of The Offered Goods (pump, Inverter/controller And Solar Module/panel). O Other Technical Specification Requirements: • With Minimum Warranty Of 1 Year On Pump And Controller/inverter, Accessories, And Services • With Minimum Warranty Of 15 Years On Pv Module F. Valid Amtec Test Report For The Pump Is Required. Upon Completion Of The Project The Raed Shall Conduct Acceptance Testing. If The System Fails To Meet The Prescribed Specifications And Performance Standards, The Contractor Shall Institute Corrective Measures For The System To Conform To Specifications And Standards As Requirement For Payment. Otherwise, The Procuring Entity Shall Not Accept The Project And Proceed With The Termination Of Contract On The Ground That The Supplier/ Winning Bidder, Who Is In Default, Fails To Perform Its Obligation Under The Contract. G. Permit To Operate And Notification Letter From Bafe Shall Be Verified During Post-qualification. H. The Award Of Contract For Procurement Projects Undertaken Through Epa May Be Made Only Upon The Following Conditions And Shall Be In Accordance With Item 7 Of Appendix 31 Of The 2016 Revised Irr Of Ra 9184: H.1 Approval And Effectivity Of The Funding Sources, To Wit: (i) General Appropriations Act; (ii) Corporate Budget; (iii) Appropriations Ordinance; Or (iv) Loan Agreement In The Case Of Faps; Or H.2 The Reenactment Of The Previous Year’s Budget Which Constitutes The Current Year’s Authorized Budget, When Authorized By The Constitution, Law Or Rules. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Florentino A. Adame, Dvm Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No.:(072) 242/1045-46, Ext. 07 E-mail Add: Darfo1.bacsec1@gmail.com 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ January 3, 2024 Approved By: Florentino A. Adame, Dvm Chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2024-infra-014

Details: Description 1 1 Lot Supply, Delivery And Installation Of Zero Fuel Plasma Pyrolysis Waste Degradation & Reduction System 34,000,000.00 34,000,000.00 I. Equipment Specifications • Electric Powered & Smokeless (4-12 Cu. M Volume Of Waste Per 12-24hrs) • Temperature Range: 300-1,100 Degrees Centigrade • Atleast 4,370mm Length, 1,330mm Width, 2,260mm Height • Not More Than 4,000 Kg Weight • Chamber Volume: ±1.0cu.m (approx.. 3 Units Of The Standard 240l Mgb) • Door Opening: (w) ±800mm X (h) ±500mm • Ashtray Door: (w) ±700mm X (h) ±250mm • Electrical Parts: 2 Units Exhaust Fan, 2 Units Blower Fan And 2 Units Water Pump • Electricity, Kw/h: Not More Than 7kw Per Hour • Use No.8 Sq.mm Thhn Wire • Use 40 At, 100af, 10kaic, 230 Volts Molded Case Circuit Breaker (mccb) With Nema 3r Enclosure • Water/liter: 1.5l ~ 2.5l/hour • Water Discharge: None • Segregation: Minimum To Nil • Hourly Throughput: 3 Units X 240l Mgb/hour • Fabrication: Mild Steel/stainless Steel Fabrication • With Stainless Conventional Water Tank At Least 1000 Liters • With At Least 1hp Motor Pump, Stainless, Single Stage, Heavy Duty • Pollution Free With Full Compliance With (united States Environmental Protection Agency) Us Epa Standard Or Its Equivalent • With Accessories: Bottom Ashtray, Oil Trap, Vapor Trap, Ash Container C/w Siever, Loading Trolley, Carbon Tray, Filter Housing Opener, Shovel, Scraper, Magnetic Retriever, Door Opening Short, Door Opening Long, Glass/vials Crasher, 1.5 Hp Pressure Washer, Personal Protective Equipment (gas Mask, Goggles And Safety Glasses, Gloves, Suit) • It Should Be Smokeless And Odorless With No Hazardous Emission Contamination (shall Comply With Environmental Quality (clean Air) Regulation Of 2014 And Us Epa Standards) • Energy Operation Requirements Not More Than 1,000 Pesos Per Day Consumption For Utilities Expense (electricity, Water And/or Gas/lpg) With 10 Cycles/day Operation Per Unit. • Waste By Product Shall Not Exceed 20% Of Initial Volume And/or Weight Or Better And Shall Be Considered General Non-infectious Waste. • Can Process Organic Waste Decomposes Into Non-harmful, Non-hazardous For Re-purposing. • Can Treat All Potential Contaminated Medical Waste Of At Least 1000 Kilo Per Day Per Unit. • Treats Infectious Waste By Any Thermal Process • Can Manage The Following Materials Of Solid Waste/ Non-hazardous Wastes From Hospital (plastics, Pet Bottles, Papers, Rubber, Tubes, Tires, Municipal Mixed Waste, Industrial, Commercial, Residential, Clinical, Electronics, Fabric And Textile, Green Waste & Chemicals) And Ensure That Emissions Do Not Harm The Environment • Shall Comply With The Denr Standards And Requirements, Provide Approved Treatment, Storage And Disposal (tsd) Certification, Approved Permit To Operate (pto) And Approved Environmental Compliance Certification, Environmental Technological Verification, Process Online Application, Amend Environmental Compliance Certification. No Payment Shall Be Made To The Supplier Unless All The Above-mentioned Permits And Certifications Will Be Provided. • Manual In English Language  Operation Manual Must Be Included In The Submission Of Bidding Documents  Service Manual With Soft Copy And Hardcopy During Delivery • Training Program For End-user On Equipment’s Operation With Certificate Technical Training • The Equipment Installed Shall Have A Warranty Of At Least One (1) Year For All Moving Parts Like Fans And Motors, While For The Enclosure/waste Treatment Facility, The Warranty Shall Be Five (5) Years. • Declaration Of Conformity With Iso/tec/pns As Issued By The Manufacture Or Its Equivalent. • Certification On The Availability Of Spare Parts For The Next 5 Years Duly Notarized • Certification From The Manufacturer Authorizing The Bidder To Exclusively Participate In The Bidding Duly Notarized. • Certificate Of After Sales Duly Notarized • With Calibration Certificate (if Necessary) • Preventive Maintenance Quarterly For A Period Of Three (3) Years • With Actual Supervision From The Supplier Within The Duration Of One (1) Year 2 1 Lot Supply, Delivery Of Labor And Materials For The Construction Of Zero Fuel Plasma Pyrolysis Waste Degradation & Reduction System Equipment Building 1,000,000.00 1,000,000.00 Ii. Construction Of Waste Treating Equipment Building A. Site Works • Clearing & Grubbing - Including Leveling & Compaction Of Existing Ground B. Earthworks B.1. Excavation • All Excavation Shall Be Performed By The Contractor To The Excavation Lines, Grades And Slopes And Profiles Shown In The Drawings. Excavation Beyond The Normal Limits Shall Not Be Paid For. B.2. Backfilling Including Compaction • Fill And Backfill Materials Shall Consist Of Suitable Materials From Excavation Or From Approved Borrow Areas, And Shall Be Free From Roots, Wood Scraps, Vegetations, And Other Extraneous Materials And From Large Clods Of Earth Or Stones Greater Than 100mm. Backfilling May Only Proceed When Concrete Has Sufficiently Cured. Observe Enough Care During Backfilling Not To Disturb Or Damage The Newly Placed Concrete. C. Structural & Concrete Works (refer Applicable Sections On Chapter 4 Of The Nscp, For Quality Of Materials, Workmanship, Execution, Acceptance, Etc.) C.1. Standards • Except As Modified By Governing Codes And By Contract Documents, Comply With The Provisions And Recommendations Of The Following, Latest Edition:  Ansi American National Standards Institute  Astm American Society For Testing Of Materials  Aci American Concrete Institute  Nbcp National Building Code Of The Philippines And Its Revised Irr  Nscp National Structural Code Of The Philippines C.3. Concrete (construction Of Waste Treating Equipment Building) • Concrete Pouring Using Concrete Strength 4,000psi Ready Mix Or Job Mixed Concrete Together With The Concrete Cylinder Sample For Testing Materials. • Site-mixed Concrete (job Mixed Concrete) - All Structural Concrete Shall Be Machine-mixed For At Least 1 ½ Minutes After All Materials Including Water Are In The Mixing Drum. No Hand Mixing Shall Be Allowed, Except In Case Of Emergency Of Breakdown During Pouring Operations. • Ready-mixed Concrete - Mixed And Delivered From A Plant Approved By The Project Manager, And Shall Be In Strict Compliance With The Requirements Set Forth In Astm C94. • Concrete Shall Be Placed Only After All Formworks, Materials To Be Embedded, And Preparation Of Surface Involved In The Placing Have Been Inspected And Approved By The Hospital Engineer. The Contractor Shall Provide Equipment And Shall Employ Methods That Will Minimize Separation Of Aggregates From The Concrete Mix. Concrete In Columns Shall Be Placed In One Continuous Operation. Concrete In Girders, Beams And Slabs In Superstructures Shall Be Poured In A Monolithic And Continuous Manner. No Construction Joint Shall Be Allowed On Any Part Of The Structure Without The Approval Of The Hospital Engineer. C.4. Steel Reinforcements (construction Of Waste Treating Equipment Building) • Securing The Reinforcements Using #16 G.i. Tie Wires. • Steel Reinforcement Shall Be Provided Together With All The Necessary Tie Wires, Spacers, Support And Other Necessary Devices. Reinforcing Steel Shall Be Accurately Cut And Bent In Accordance With The Approved Detailed Reinforcement Drawings. C.5. Formworks (construction Of Waste Treating Equipment Building) • All Forms Shall Be Designed By The Contractor For A Safe Construction Activity And Installed To Dimensions Shown On The Drawings. • Using Phenolic Boards On Formworks With Shoring Supports. • Forms Shall Be Used Whenever Necessary To Confine The Concrete And Shape It To The Required Lines And Dimensions, Or To Protect The Concrete From Contamination. Forms Shall Have Sufficient Strength To Withstand The Pressure Resulting From Placement And Vibration Of The Concrete, And Shall Be Maintained Rigidly In Correct Position. Forms Shall Be Sufficiently Tight To Prevent Loss Of Mortar From The Concrete. C.6. Structural Steel And Metal Works (refer Chapter 5 Of The Nscp) (construction Of Waste Treating Equipment Building) • Materials Steel And Metals For The Works Shall Meet The Requirements Of Astm A36, Hot-rolled Shapes And Plates. • Welding Works Shall Be In Accordance With Structural Welding Code (american Welding Society-d1.1, Latest Edition). Welding Electrodes Shall Be E70xx, Minimum, Meeting The Requirements Of Aws A.5. All Welders Shall Meet The Qualifications Under The Aws Codes And Standards. • Roof Framing Roof Framings/rafters Shall Be Constructed, Erected, And Properly Anchored To The Roof Beams Or Columns As Indicated In Drawings. D. Architectural Works D.1 Painting Works • Exterior Finishes  One (1) Coat Of Concrete Neutralizer By Roller, Let Dry For 6 Hours.  Putty Surface Imperfections, Hairline Cracks With Patching Compound Using Putty Knife.  Two (2) Coats Primer By Roller  Finish With Two (2) Coats Acrylic Topcoat Semi-gloss • Structural & Architectural Steel – G.i. Pipe Schedule 40 Columns, Roof Framings, Steel Beams, Catch Basin Cover & Drain Grill Barrier  Prepare The Surface Properly  Apply One Coat Of Primer  If Necessary, Apply Polyester Body Filler By Using Putty Knife.  Apply Two Coats Of Acrylic Topcoat Semi-gloss D.2 Roofing • Roof Sheets Must Be In Ga 24 G.i. Rib-type Long Span, Pre-painted Roofing. • Roofing Shall Be Fastened Properly To The Purlins By A 2-½ Inch Tec Screw (self-drilling Screw). E. Plumbing Works E.1 Sanitary Layout • Provide 4” Diameter Drainage For Cleaning And Disinfection Purposes Of The Building. • Use 2pcs 6” Floor Drain W/ 4” Diameter Pvc Pipes & Fittings That Will Be Connected To The Near Existing Septic Vault. F. Landscape F.1 Fruit-bearing Plants With Pavers • Provide Four (4) Fruit Bearing Plants Around The Housing Structure With Pavers. G. Detailed Architecture And Engineering Design (daed) • Provide The Necessary Daed That Is Required For The Equipment. Completion/delivery Period  The Completion Of The Project Shall Be One Hundred Fifty (150) Calendar Days Upon Receipt Of The Notice To Proceed Including The Delivery, Installation, Testing And Commissioning. 35,000,000.00

Details: Description Local Government Of Valencia Catarata Street, Poblacion, Valencia City, Bukidnon, Philippines Philippine Access (088) 828-5430 Contract Reference No. 45-2024 09/27/2024 Invitation To Bid For The Construction Of 1-classroom School Building At Salubsob Elementary School, Barangay Lilingayon, Valencia City, Bukidnon 1. The City Government Of Valencia Through Its Annual Appropriations Intends To Apply The Sum Of Two Million Ninety-two Thousand Seven Hundred Four Pesos And 21/100 (php 2,092,704.21) Being The Approved Budget Of The Contract (abc) To Payments Under The Contract For The Construction Of 1-classroom School Building At Salubsob Elementary School, Barangay Lilingayon, Valencia City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Valencia Now Invites Bids For The Construction Of 1-classroom School Building At Salubsob Elementary School, Barangay Lilingayon, Valencia City, Bukidnon. Particulars Describes As Follows: Item No. Qty Unit Description Specifications Unit Cost Total Cost 1 1 Lot Construction Of 80.1 Sq.m. 1- Classroom School Building With The Following Scope Of Works: See Attached Plan And Specifications Php2,092,704.21 - Structure Excavation, Backfilling With Compaction And Gravel Bedding; - Concrete Works With Metal Reinforcements; - Installation Of 4" Chb With Cement Plaster Finish; - Fabrication And Installation Of Structural Steel For Roof Framing And Fascia Frame; - Installation Of Pre-painted Corrugated Roofing Sheets, Pre-painted Pre-fabricated Ridge Roll, Pre-painted Pre-fabricated Spanish Gutter, Pre-painted Pre-fabricated End Capping And Fascia Board; - Installation Of Ceiling Joist And Ceiling Board; - Fabrication And Installation Of Blackboard; - Painting Works Of Walls, Ceiling And Blackboard; - Installation Of Doors And Windows; - Fabrication And Installation Of Grills For Windows And Door Transom; - Construction Of Septic Vault; - Installation Of Plumbing Fixtures (w/ Stainless Steel Cylindrical Storage Water Tank; 1500l Capacity), Sanitary Pipes And Fittings And Water Supply Pipes And Fittings; - Installation Of Glazed And Unglazed Tiles For Comfort Room; - Electrical Works And Installation Of Fire Alarm System As Per Approved Plans And Specifications. General Requirements B.5(1) 2.00 Ea Project Billboard/signboard B.7(1) 1.00 L.s. Occupational Safety And Health Program B.9(1) 1.00 L.s. Mobilization/demobilization Earthworks 803(1)a 28.22 Cu.m Structure Excavation 804(1)a 14.17 Cu.m Embankment 804(4) 11.87 Cu.m Gravel Fill Plain And Reinforced Concrete 900(1) 23.84 Cu.m Structural Concrete 902(1)a 2,599.80 Kgs Reinforcing Steel 903(2) 125.75 Sq.m. Forms And Falseworks Masonry Works 1046(2)a1 97.43 Sq.m Chb Non Load Bearing (including Reinforcing Steel) Finishing Works 1027(1) 189.94 Sq.m Plain Cement Plaster Finish 1021(1) C 76.50 Sq.m Cement Floor Finish With Floor Hardener 1021(5) 5.76 Sq.m Cement Floor Finish With Groove 1003(1)a1 100.80 Sq.m Ceiling Works 1003(11)a1 12.48 Sq.m Carpentry And Joinery Works, Fascia Board, Fiber Cement Board 1003(17) 95.00 Bd.ft Carpentry And Joinery Works (blackboard) 1051(5) 18.26 L.m Railings (38mm Dia. Stainless Steel) Fabricated Materials And Harware 1009(1)a 15.89 Sq.m. Glass Jalousie Window 1009(1)b 18.56 Sq.m. Window Grills 1010 4.00 Sets Doors Roof Framing And Roofing Works 1047(8) 1,771.34 Kgs Structural Steel 1014(1)b1 108.00 Sq.m Prepainted Metal Sheets, Long Span, Corrugated 1013(2)a1 51.60 L.m. Fabricated Metal Roofing Accessory Tile Works 1018 18.96 Sq.m Tile Works Painting Works 1032(1)a 191.74 Sq.m Masonry/concrete Painting 1032(1)b 123.44 Sq.m Wood Painting Sanitary And Plumbing Works 1002(27) 5.00 Sets Plumbing Fixtures 1001(8)a 39.60 L.m Sanitary Pipe 1001(8)b 45.00 Pcs Sanitary Fitting 1002(24)a 28.00 L.m Water Supply Pipe 1002(24)b 17.00 Pcs Water Supply Fittings 1001(11) 1.00 L.s. Septic Vault Electrical Works 1100 (1) 1.00 Length 15mm-25mmø Rsc/imc/emt 1100 (6) A 30.00 Length 15mm-32mmø Polyvinyl Chloride (pvc) Pipes 1100 30.00 Pc Junction/utility Pull/square Box 1101 (2) 203.00 M Electric Wire (tw/thhn/twhn²) 1101 (2) F1 60.00 M 14mm² Insulated Acsr Wire Cable 1101 (42) 13.00 Set Wiring Devices 1102 (1) 1.00 Set Panel Board With Main Breaker/branches 1103 (1) 11.00 Set Lighting Fixtures 1200 (2) B 3.00 Set Oscillating Fan 1208(1) 1.00 Lot Fire Alarm System Miscellaneous Spl-ii 1.00 L.s. Hauling Of Other Materials Php2,092,704.21 Required Number Of Days For Completion Is 100 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Within 10 Years From The Date Of Submission And Receipt Of The Bid Hereof. The Description Of An "eligible Bidder" Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 3. No Time Extension Shall Be Granted Unless On Fortuitous Event, Acts Of Nature Or Any Natural Calamities. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail" Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act". Bidding Is Restricted To Filipino Citizens, Sole Proprietorship, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 5. Interested Bidders May Obtain Further Information From Josafat L. Caipang, Head Of Lgu-valencia City Bac Secretariat And Inspect The Bidding Documents At Address Given Below From Mondays-fridays 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On September 28, 2024 To Opening Date From The Address Below And Upon Payment Of Non-refundable Fee For The Bidding Documents In The Amount Five Thousand Pesos (php 5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That The Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Site Inspection Is Required From Every Interested Bidder And Site Inspection Certificate Shall Form Part Of The Bid Documents. No Site Inspection Certificate Shall Mean Automatic Disqualification. Site Inspection Schedule Is On October 4, 2024 At 10:00 O’clock In The Morning, Assembly Area At Bac Office. 6. The City Government Of Valencia Will Hold Its Pre-bid Conference On October 7, 2024 (1:30 Pm) At The Bac Office, City Hall Compound, City Of Valencia, Bukidnon Which Shall Be Open To All Interested Bidders. 7. Only Project Engineers, Materials Engineer And The Like Are Required To Attend The Pre-bid Conference. In The Absence Of The Same, The Representative Must Present To The Bac An Authorization Letter Signed By The Owner. 8. Interested Contractor Are Required To Include In Their Technical Bid Proposal The Duly Signed List Of Contractor's Equipment Units, Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project. 9. Prospective Bidders Who Were Not Able To Purchase Bid Documents Prior To The Bid Opening Shall Not Be Opened And Will Be Disqualified. 10. Bids Must Be Delivered To The Address Below On Or Before (1:00 Pm) October 21, 2024. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representative Who Chooses To Attend At The Address Below. Bid Opening Shall Be On (1:30 Pm) October 21, 2024 At Bac Office, City Hall Compound, City Of Valencia, Bukidnon. Late Bids Shall Not Be Accepted. The Clock In The Bac Office Shall Serve As The Time Reference, And Shall Be The Basis For The Official Time Received Of The Bidding Documents Submitted In The Office. 11. The City Government Of Valencia Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Bid. 12. The Head Of The Procuring Entity (hope) Reserves The Right To Accept Or Reject Any Or All Bids To Annul The Bidding Process, At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. All Correspondence Shall Be Addressed To The Bac Secretariat, Attention: Mr. Abe P. Gillaco, Mpa, Bac Chairman. 14. For Further Information, Please Refer To: Lgu Valencia City-josafat L. Caipang Admin Office, 8709 Catarata St., Poblacion, Valencia City, Bukidnon Tel. No. (088) 828-5430 (sgd) Abe P. Gillaco, Mpa Bac Chairman

Details: Description Local Government Of Valencia Catarata Street, Poblacion, Valencia City, Bukidnon, Philippines Philippine Access (088) 828-5430 Contract Reference No. 46-2024 09/27/2024 Invitation To Bid For The Construction Of 1-classroom School Building At Kouyagan Elementary School, Sitio Sumpong, Barangay Banlag, Valencia City, Bukidnon 1. The City Government Of Valencia Through Its Annual Appropriations Intends To Apply The Sum Of Two Million One Hundred Fifty-nine Thousand Nine Hundred Fourteen Pesos And 91/100 (php 2,159,914.91) Being The Approved Budget Of The Contract (abc) To Payments Under The Contract For The Construction Of 1-classroom School Building At Kouyagan Elementary School, Sitio Sumpong, Barangay Banlag, Valencia City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Valencia Now Invites Bids For The Construction Of 1-classroom School Building At Kouyagan Elementary School, Sitio Sumpong, Barangay Banlag, Valencia City, Bukidnon. Particulars Describes As Follows: Item No. Qty Unit Description Specifications Unit Cost Total Cost 1 1 Lot Construction Of 80.1 Sq.m. 1- Classroom School Building With The Following Scope Of Works: See Attached Plan And Specifications Php2,159,914.91 - Structure Excavation, Backfilling With Compaction And Gravel Bedding; - Concrete Works With Metal Reinforcements; - Installation Of 4" Chb With Cement Plaster Finish; - Fabrication And Installation Of Structural Steel For Roof Framing And Fascia Frame; - Installation Of Pre-painted Corrugated Roofing Sheets, Pre-painted Pre-fabricated Ridge Roll, Pre-painted Pre-fabricated Spanish Gutter, Pre-painted Pre-fabricated End Capping And Fascia Board; - Installation Of Ceiling Joist And Ceiling Board; - Fabrication And Installation Of Blackboard; - Painting Works Of Walls, Ceiling And Blackboard; - Installation Of Doors And Windows; - Fabrication And Installation Of Grills For Windows And Door Transom; - Construction Of Septic Vault; - Installation Of Plumbing Fixtures, Sanitary Pipes And Fittings And Water Supply Pipes And Fittings - Installation Of Glazed And Unglazed Tiles For Comfort Room; - Electrical Works With Solar Hybrid Off/on Grid System; And - Installation Of Fire Alarm System As Per Approved Plans And Specifications. General Requirements B.5(1) 2.00 Ea Project Billboard/signboard B.7(1) 1.00 L.s. Occupational Safety And Health Program B.9(1) 1.00 L.s. Mobilization/demobilization Earthworks 803(1)a 27.14 Cu.m Structure Excavation 804(1)a 13.69 Cu.m Embankment 804(4) 11.51 Cu.m Gravel Fill Plain And Reinforced Concrete 900(1) 23.20 Cu.m Structural Concrete 902(1)a 2,558.77 Kgs Reinforcing Steel 903(2) 125.75 Sq.m. Forms And Falseworks Masonry Works 1046(2)a1 97.43 Sq.m Chb Non Load Bearing (including Reinforcing Steel) Finishing Works 1027(1) 187.54 Sq.m Plain Cement Plaster Finish 1021(1) C 76.50 Sq.m Cement Floor Finish With Floor Hardener 1021(5) 5.76 Sq.m Cement Floor Finish With Groove 1003(1)a1 100.80 Sq.m Ceiling Works 1003(11)a1 12.48 Sq.m Carpentry And Joinery Works, Fascia Board, Fiber Cement Board 1003(17) 95.00 Bd.ft Carpentry And Joinery Works (blackboard) 1051(5) 18.26 L.m Railings (38mm Dia. Stainless Steel) Fabricated Materials And Harware 1009(1)a 15.89 Sq.m. Glass Jalousie Window 1009(1)b 18.56 Sq.m. Window Grills 1010 4.00 Sets Doors Roof Framing And Roofing Works 1047(8) 1,771.34 Kgs Structural Steel 1014(1)b1 108.00 Sq.m Prepainted Metal Sheets, Long Span, Corrugated 1013(2)a1 51.60 L.m. Fabricated Metal Roofing Accessory Tile Works 1018 18.96 Sq.m Tile Works Painting Works 1032(1)a 191.74 Sq.m Masonry/concrete Painting 1032(1)b 123.44 Sq.m Wood Painting Sanitary And Plumbing Works 1002(27) 5.00 Sets Plumbing Fixtures 1001(8)a 39.60 L.m Sanitary Pipe 1001(8)b 45.00 Pcs Sanitary Fitting 1002(24)a 28.00 L.m Water Supply Pipe 1002(24)b 17.00 Pcs Water Supply Fittings 1001(11) 1.00 L.s. Septic Vault Electrical Works 1100 (1) 1.00 Length 15mm-25mmø Rsc/imc/emt 1100 (6) A 30.00 Length 15mm-32mmø Polyvinyl Chloride (pvc) Pipes 1100 30.00 Pc Junction/utility Pull/square Box 1101 (2) 203.00 M Electric Wire (tw/thhn/twhn²) 1101 (42) 13.00 Set Wiring Devices 1102 (1) 1.00 Set Panel Board With Main Breaker/branches 1103 (1) 11.00 Set Lighting Fixtures 1200 (2) B 3.00 Pc Oscillating Fan Spl 1 1.00 Set Solar Hybrid Off/on-grid System 1208(1) 1.00 Lot Fire Alarm System Miscellaneous Spl-ii 1.00 L.s. Hauling Of Other Materials Php2,159,914.91 Required Number Of Days For Completion Is 100 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Within 10 Years From The Date Of Submission And Receipt Of The Bid Hereof. The Description Of An "eligible Bidder" Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 3. No Time Extension Shall Be Granted Unless On Fortuitous Event, Acts Of Nature Or Any Natural Calamities. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail" Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act". Bidding Is Restricted To Filipino Citizens, Sole Proprietorship, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 5. Interested Bidders May Obtain Further Information From Josafat L. Caipang, Head Of Lgu-valencia City Bac Secretariat And Inspect The Bidding Documents At Address Given Below From Mondays-fridays 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On September 28, 2024 To Opening Date From The Address Below And Upon Payment Of Non-refundable Fee For The Bidding Documents In The Amount Five Thousand Pesos (php 5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That The Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Site Inspection Is Required From Every Interested Bidder And Site Inspection Certificate Shall Form Part Of The Bid Documents. No Site Inspection Certificate Shall Mean Automatic Disqualification. Site Inspection Schedule Is On October 4, 2024 At 10:00 O’clock In The Morning, Assembly Area At Bac Office. 6. The City Government Of Valencia Will Hold Its Pre-bid Conference On October 7, 2024 (1:30 Pm) At The Bac Office, City Hall Compound, City Of Valencia, Bukidnon Which Shall Be Open To All Interested Bidders. 7. Only Project Engineers, Materials Engineer And The Like Are Required To Attend The Pre-bid Conference. In The Absence Of The Same, The Representative Must Present To The Bac An Authorization Letter Signed By The Owner. 8. Interested Contractor Are Required To Include In Their Technical Bid Proposal The Duly Signed List Of Contractor's Equipment Units, Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project. 9. Prospective Bidders Who Were Not Able To Purchase Bid Documents Prior To The Bid Opening Shall Not Be Opened And Will Be Disqualified. 10. Bids Must Be Delivered To The Address Below On Or Before (1:00 Pm) October 21, 2024. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representative Who Chooses To Attend At The Address Below. Bid Opening Shall Be On (1:30 Pm) October 21, 2024 At Bac Office, City Hall Compound, City Of Valencia, Bukidnon. Late Bids Shall Not Be Accepted. The Clock In The Bac Office Shall Serve As The Time Reference, And Shall Be The Basis For The Official Time Received Of The Bidding Documents Submitted In The Office. 11. The City Government Of Valencia Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Bid. 12. The Head Of The Procuring Entity (hope) Reserves The Right To Accept Or Reject Any Or All Bids To Annul The Bidding Process, At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. All Correspondence Shall Be Addressed To The Bac Secretariat, Attention: Mr. Abe P. Gillaco, Mpa, Bac Chairman. 14. For Further Information, Please Refer To: Lgu Valencia City-josafat L. Caipang Admin Office, 8709 Catarata St., Poblacion, Valencia City, Bukidnon Tel. No. (088) 828-5430 (sgd) Abe P. Gillaco, Mpa Bac Chairman