Department Of Agriculture Tender

Description Establishment Of 1 Unit Corn Post Harvest Processing Facility, Camansi, Alamada, Cotabato Total Abc: P49,897,970.30 Line Item No. 2: Supply, Delivery, Installation And Commissioning Of Corn Processing Equipment Abc: P23,320,000.00 A. Corn On Cob Dryer (4 Units) Specification: - Heating System Efficiency: Biomass Fuel Indirect Fired : 50% , Minimum - Average Moisture Reduction Rate: 0.25% Per Hour (down To 20% Mc), Minimum - Dried Corn Shall Have No Additional Discoloration, Traces Of Unburned Fuel Or Ashes On Corn Surface And Fermente Or Musty Smell - Final Moisture Content: 20% Mc - System Operation: Batch Type - Load Capacity: 100 Mt Capacity With 4 X 25 Mt Drying Bins - Minimum Components: Drying Bin, Fan/blower, Heating System, Control Panel - With Intake Pit, Floor Level Construction - With Belt Conveyor (feeding, Loading, Distribution) - With Provision Of Steel Ladder For Repair And Maintenance - With Biomass Furnace (indirect Fired, Made Of Refractory Bricks) - With Heat Exchangers (fire Tubes) B. Corn Sheller (3 Units) Specification: - Prime Mover: 10 Hp Electric Motor Or A Sum Of Hp Motors, Minimum - Capacity: 6mt/hr @ 18-20% Mc, Minimum - Shelling Recovery: 97%, Minimum - Shelling Efficiency: 99.5%, Minimum - Losses: > Blower: 1%, Maximum > Separation: 1%, Maximum > Unshelled: 0.5%, Maximum - Purity: 98%, Minimum - Mechanically Damage (broken) Kernel: 3% Maximum - Cleaning Component: Fan, Blower And Sifter - With Conveyor (belt Type) 10,000 Kg/hr Capacity, Minimum - With Individual Grain Elevator - With Provision Of Steel Ladder For Repair And Maintenance C. Grain Dryer (lsu Type) (3 Units) Specification: - Type: Recirculating, Vertical - Load Capacity: 14 Mt Shelled Corn At 20%, Minimum With Individual Biomass Furnace - Moisture Gradient: 2%, Maximum - Drying Rate: 2% Per Hour - Craked Kernel/grain: 10%,maximum - Drying Efficiency: 75%, Minimum - Heating System Efficiency: Biomass Fuel Indirect Fired : 50% , Minimum - Blower Flow Rate: 0.05 Cmm/kg - Static Pressure: 25 Mm H2o - Dust Collecting System: Centrifugal Aspiration Fan - With Accessories: > Provided With Dust Collection System > With During Air Grain Temperature Display > With Built0in Moisture Meter > With Belt Conveyor (loading, Distribution) > With Viewing Window For Every Module - With Centralized Panel For Switches/control Of Grain Drying Temperature, Pressure, Voltage And Current - With Provision Of Steel Ladder For Repair Maintenance - With Bucket Elevator - With Biomass Furnace (indirect Fired, Made Of Refractory Bricks) - With Heat Exchangers (fire Tubes) - With Bagging Bin 12 Tons Capacity, Minimum - With Digital Weighing Scale - With Provision Of Platforms - With Auger Type Conveyors And Thermostat On Furnace For All Dryers D. Electrical Control Panel System (1 Unit) - Provision Of Electrical Control Panel For Corn Processing Facility Compatible To The Equipment E. Electric Bagger Sewer (1 Unit) - Electric Operated - With Direct Driven Fan Motor - With Dust Proof Housing And Permanently Lubricated Bearing - Conversion Two-thread Double Locked Stitch Into Single Thread Chain Stitch Andvice Versa - Speed, 1,200 Sitch Perm Minute (spm), Minimum - Stitch Length: 3 Stitch Per Inc (spi), Minimum - Weight: 6-8 Kilograms With Thread - For Agrisultural Products Use F. Transformer (3 Units) - 100 Kva, Minimum With Accessories And Tools - One Set Socket Wrench (no. 8-32, Minimum) - One (1) Set Combination Wrench, (open End And Box Type, 10 Pcs Of Different Sizes, Size Must Be Appropriate To The Components Of Feed Mill - Adjustable Wrench: 300 Mm, Minimum - Electrical Pliers: 200 Mm, Minimum - Mechanical Pliers: 200 Mm, Minimum - Grease Gun: 100 Cc, Minimum - Screwdriver: Philips And Flat Head, 300 Mm, Minimum - With Toolbox That Can Accommodate All Tools Listed Above - With One (1) Unit Grain Moisture Meter (compatible For Corn) Other Requirements - All Moving And Rotating Components Of The Cpf Must Be Covered - All Components Shall Have Names / Markings / Directions (written In English Comprehensive) Including Buttons - Materials Shall Be All Brand New - With Ease Of Access Maintenance, Repair And Monitoring Works For All Components And Parts Of The Corn Post Harvest Facility - Units Must Bear Da Logo (10 Inches In Diameter, Metal Plated And Revited) - Specifications Must Be Signed And Sealed By Rpabe With Valid Prc And Ptr - Should Have Service Center And Trained Technicians Within The Region - No Reported Major Breakdowns For Products Under Warranty In The Last Two Years - Repair Of Defective Units And Provision Of Other Sales Services Within 72 Hours Upon Receipt Of Complaint/s - The Technician/s Of The Mfaddies And Its Accredited Service Center Must Have Tesda National Certificate Ii (ncii) Relevant To The Job Or An In House Training - Warranty: One (year Warranty On Parts And Services) - Supplier Must Submit A Copy Of Their Amtec Test (system Test Application Upon Bidding) - Supplier Shall Conduct Operations And Maintenance Training To The Recipients - The Supplier Must Have A Resident Mechanical Engineer To Supervise The Installation Of The Components - Project Duration: 150 Calendar Days - Project Location: Brgy. Camansi, Alamada, Cotabato - Cost Of Bidding Documents: P25,000.00 Line Item No. 3: Supply, Delivery, Installation And Commissioning Of Feed Mill Equipment Abc: P5,875,000.00 A. Dry Feed A. Hammer Mill (1 Unit) Specification: - - Prime Mover: 15 Hp , Electric Motor, Minimum - Milling Capacity: 600 Kg/hr., Minimum - Milling Mechanism: Swinging Type - With Accessories > One (1) Spare Hammer > Collecting Bin For Dicharge Outlet Including Dust Collection System - Noise Level: 96 Db (a), Maximum - With Gear Box Rpm Reducer B. 3-decker Horizontal Feed Mixer With Elevator (1 Unit) Specification: - Prime Mover: 7.5 Hp , Electric Motor, Minimum - Mixing Rate: 2,000 Kg/hr, Minimum - Mixing Drum Position: Horizontal - Mixing Blade: Ribbon Type Type: Batch - No Clogging In The Mixing Chamber - Noise Level: 96 Db (a), Maximum - With Bucket Elevator With 2hp Ac Motor, Minimum - With Batching, Mixing And Discharge Chambers B. Wet Feed A. 1-decker Horizontal Feed Mixer With Elevator (1 Unit) Specification: - Prime Mover: 5 Hp , Electric Motor, Minimum - Mixing Rate: 300 Kg/hr, Minimum - Mixing Drum Position: Horizontal - Mixing Blade: Ribbon Type Type: Batch - No Clogging In The Mixing Chamber - Noise Level: 96 Db (a), Maximum - With Gear Box Rpm Reducer B. Feed Pellet Mill (1 Unit) Specification: - Pelleting Efficiency: 92%, Minimum - Pelleting Recovery: 95%, Minimum - Pellets Diameter's Cofficient Of Variation: 7%, Maximum - Prime Mover: 6 Hp, Electri Motor, Minimum - Capacity: 100 Kgs/hr, Minimum With Adjustable Die Hole Diameter - Type Of Die: Flat - Pelleting Mechanism: Die Rotating Flat Die Pellet Mill - Power Transmission System: V Belt And Pulley - Roller: Hjelical Closed-end Corrugated Roller - Mounted On A Steel Base Structure - Wuth Replaceble Die, At Least Three (3) Sets - With Wpo Gear Reducer, Direct Coupled With Accessories: A. Rotary Recirculating Dryer Specification: - Prime Mover: 3 Hp, Electric Motor, Minimum - Capacity 50 Kgs/hr, Min - Heat Source: Lpg Heat From Existing Cooker Type: : Direct-fired - With Bucket Elevator B. Belt Conveyor Specification: - Prime Mover: 3 Hp, Electric Motor, Minimum - Capacity 50 Kgs/hr, Min - Length : 2.0 M, Minimum C. Oscillating Screen Specification: - Prime Mover: 3 Hp, Electric Motor, Minimum - Capacity 50 Kgs/hr, Min C. Double Ribbon Screw Conveyor Cooker/heater (1 Unit) Specification: - Prime Mover: 3 Hp, Electric Motor, Minimum - Capacity 50 Kgs/hr, Min - Length : 2.0 M, Minimum E. Electric Bagger Sewer (1 Unit) - Electric Operated - With Direct Driven Fan Motor - With Dust Proof Housing And Permanently Lubricated Bearing - Conversion Two-thread Double Locked Stitch Into Single Thread Chain Stitch Andvice Versa - Speed, 1,200 Sitch Per Minute (spm), Minimum - Stitch Length: 3 Stitch Per Inc (spi), Minimum - Weight: 6-8 Kilograms With Thread - For Agricultural Products Use F. Transformer (1 Unit) - 37.5 Kva, Minimum Other Requirements - All Moving And Rotating Components Of The Cpf Must Be Covered - All Components Shall Have Names / Markings / Directions (written In English Comprehensive) Including Buttons - Materials Shall Be All Brand New - With Ease Of Access Maintenance, Repair And Monitoring Works For All Components And Parts Of The Corn Post Harvest Facility - Units Must Bear Da Logo (10 Inches In Diameter, Metal Plated And Revited) - Specifications Must Be Signed And Sealed By Rpabe With Valid Prc And Ptr - Should Have Service Center And Trained Technicians Within The Region - No Reported Major Breakdowns For Products Under Warranty In The Last Two Years - Repair Of Defective Units And Provision Of Other Sales Services Within 72 Hours Upon Receipt Of Complaint/s - The Technician/s Of The Mfaddies And Its Accredited Service Center Must Have Tesda National Certificate Ii (ncii) Relevant To The Job Or An In House Training - Warranty: One (year Warranty On Parts And Services) - Supplier Must Submit A Copy Of Their Amtec Test (system Test Application Upon Bidding) - Supplier Shall Conduct Operations And Maintenance Training To The Recipients - The Supplier Must Have A Resident Mechanical Engineer To Supervise The Installation Of The Components - Project Duration: 30 Calendar Days - Project Location: Brgy. Camansi, Alamada, Cotabato - Cost Of Bidding Documents: P10,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance E. Pcab License 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature