Department Of Agrarian Reform Tender

Description Lot 1 4wd Tractor (49.50 Hp) Specifications: Engine Number Of Cycle: 3 Cycle (2.9 L) Aspiration Naturally Aspired Emission Level: Tier 2 Rated Power: 49.5hp @ 2100 Engine Rpm Max. Torque: 205 Nm @ 1300 Rpm Approximately Fuel Tank Capacity: At Least 60 Liters Transmission And Clutch Type Of Transmission: 8 Forward X 8 Reverse, Mechanical Synchro Shuttle Minimum Speed: 2.75 Kph Maximum Road Speed: 34 Kph Type Of Clutch System: Dual Clutch System/dry, Friction Plate (at Least 11" Diameter) Hydraulics Main Pump Flow/ Pump Pressure (lpm/bar): 38/210 Independent Steering Pump Flow (lpm/bar): 38/210 Rear Remote Valves (max. Number): 2 (factory Fitted) Three-point Linkages Category: I, Ii Lift Capacity: 1,800 Kg @ Ball Ends Maximum Lift Capacity: 1,440 Kg @ .610 Mmbehind Ball Ends Pto Type: Independent (dedicated 11" Clutch For The Pto) Engine Rpm @ 540/540e: 2016/1590 Equipped With Stationary Reverse Pto And Ground Speed Pto Machine Dimensions Weight: At Least 2265 Kg Front Tire Size: Factory Standard Rear Tire Size: Factory Standard Overall Width: At Least 1751 Mm Wheel Base At Least 2040 Mm Overall Length (includes Front Weights): At Least 3750 Mm Height To Top Of Rops W/ Canopy: At Least 2665 Mm Included Implements 1. Disc (blade) Plow Number Of Blades: 3 Discs Discs Diameter (mm, In.): At Least 558.8 Mm/22" Working Depth: Adjustable Between 4 And 7 Inches Furrow Width: Adjustable Around 12-18 Inches 2. Rotary Tiller Flange Piece: 9 Tiling Width: At Least 1750 Mm Tractor Hp: At Least 40-50 Side Gear Type: Gear Rated Shaft Speed: At Least 540 Rpm Rated Blade Speed: At Least 178 Rpm 3. Direct Seeder (multi-seeder) Dimensions Height: At Least 105 Cm Width: At Least 55 Cm Depth: At Least 55 Cm Weight: At Least 30 Kg Hopper Hopper Capacity: At Least 105 Kgs Working Width: 4.5 Meters Maximum Outlets: 6 To 8 Outlets Max. Seeding Rate: 3.4 Kg/minute Other Specifications: Controller: Allows Calibration Of Feed Rate To Ground Speed (e.g. Multi Metering System) Fan Type: Electric Motor Hopper Material: Poly Seed Hopper 4. Engine With Water Pump Engine Type: Single-cylinder, Vertical, Water-cooled Diesel Engine Power Output: 8 Hp Displacement: 611 Cc Fuel Type: Diesel Cooling System: Water-cooled Engine Speed: 2200 Rpm Compression Rate: 17.1 Starting System: Manual Start With Option For Electric Start Weight: 150 Kg Water Pump Pump Type: Centrifugal Pump Or Self-priming Pump Maximum Flow Rate: At Least 2000 To 4000 Lph Maximum Head (pressure): 30 Meters Suction Size: 50 Mm Discharge Size: 50 Mm 5. Rice Milling And Polishing Machine Dimensions Length : 1260 Mm Width: 865 Mm Height: 1532 Mm Weight: 208 Kg Milling Degree: Well Milling Efficiency: 70.295 % Minimu Milling Recovery Index: 0.985 Minimum Percent Head Rice Index: 0.91 Minimum Output Capacity: 25-300 Kg Per Hour (polished Rice) Rated Output Power: 3.73 (kw) Rated Speed: 1760 Rpm Phase: Single Voltage: 220v 6. Post Hole Digger Working Depth: 890 Mm/35" Hitch: Category I Gear Box: Compatible With 55 Hp Max., With 3:1 Ratio Output Shaft: 50 Mm/2" Input: 540 Rpm P.t.o.: Clutch Type Auger Length: 1100/43" Auger Size: 12" Flighting: Semi-double Wieght (approx.): 220 Kg. Additional Requirements: 1. Amtec Test Report For: A. 49.5 Hp 4wd Tractor B. Rotary Tiller C. Apv Seeder D. Disc Plow 2. Certificate Of Compliance For The Tractor Warranty: One-year Warranty Against Factory Defects Or Minimum Of 400 Machine Hours (minimum) Training: One-day Training On Operation And Maintenance, Including Assembly, Demo, And Testing Of The Machine On The Delivery Site Delivery: On-site: @ Butuan Agusan Farmers Mpc - Los Angeles, Butuan City Sticker: With Reflectorized Sticker Printed With Dar Logo And The Words “provincial Agrarian Reform Office Of Agusan Del Norte - Arf Project” Lot 2 Brand-new Country Of Origin/made: Japan Engine Type: Water-cooled Four-cycle Four-cylinder Vertical Diesel Engine (with Turbocharger) Total Displacement: 2.4 L Minimum Output/rotational Speed: 50.7 Kw/2700 Rpm Minimum Engine Rated Power: 70 Hp Fuel Tank Capacity: 85 L Minimum Travel Section Crawler: Width X Ground Contact Length: 500 X 1700 Mm (minimum) Center Distance: 1200 Mm Minimum Average Ground Pressure: 17 To 18 Kpa Minimum Ground Clearance: 300 Mm Speed Shift System: Hst 3-range (3f/3r) Travel Speed: 5 Kph Minimum Turning System: Clutch And Brake Reaper Section Reel: Dia. X Width - 900 Mm X 1900 Mm (minimum) Up/down Control: Hydraulic System Gathering Length: 2000 Mm Minimum Cutter Bar Length: 1900 Mm Minimum Thresher Section Threshing System: Axial Flow System (threshing Tooth System) Threshing Cylinder: Dia. X Length: 600 X 1600 Mm Minimum Revolutions: 520 Rpm Minimum Sorting Area: Oscilating 3-way Air Stream Cleaning System Battery: 12v Minimum Harvesting Capacity: 0.50 Ha/hr. Minimum Dimensions: Overall Length: 4800 Mm Minimum Overall Width: 2200 Mm Minimum Overall Height: 2800 Mm Minimum Gross Weight: 3000 Kg. Minimum Performance Classification: Field Efficiency: 75% Minimum Total Machine Loss: 3.5% Maximum Purity: 97% Minimum Mechanically Damaged/broken Grain: 2.0% Maximum Net Cracked Grain: 5% Maximum Cutting Width: 2.0 M. Minimum Threshed Grain Output Capacity: 4500 Kg/hr Minimum Grain Tank Capacity: 300 Kg. Minimum Noise Level: 82 To 95 Decibel Grain Unloading: Manual Cleaning System: Mechanical Attachment: 1 Unit Transport Trailer Tools: Set Of Standard/heavy-duty Tools (wrenches-tire Wrench, Cross Wrench, Socket Wrench, Single/two-way Wrench, Screwdrivers, Pliers, Jack, Etc.) Note: All Tool Sizes Must Match Where They Are Needed. Other Features: With Original Equipment Manufacturer Manual With Valid Test Report Issued By Amtec Must Conform To Paes Certificate Of Compliance Of The Unit/model From Bafe Supplier Must Have Namdac Accreditation Supplier Must Submit Certificate Of Dealership To Join Bidding From The Distributor Supplier Must Submit Certificate Of Stocks Allocation From The Distributor Warranty: One-year Warranty Against Factory Defects Or 400 Machine Hours (minimum) Parts/service: Available Within Caraga Region Training: One-day Training On Operation And Maintenance, Includes Assembly Of The Machine In The Delivery Site Delivery: On-site: @ Santo Niño Mpc - Santo Niño, Butuan City Sticker: With Reflectorized Sticker Printed With Dar Logo And The Words “provincial Agrarian Reform Office Of Agusan Del Norte - Arf Project”