City Of Bislig Tender

Description 1. The Local Government Unit Of Bislig City, Through The General Fund 2023 Intends To Apply The Sum Of Twelve Million Pesos Only (ᵽ 12,000,000.00) Being The Abc To Payments Under The Contract For Pbd 010-2024 (goods). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Local Government Unit Of Bislig City, Through The General Fund 2023 Intends To Apply The Sum Of Twelve Million Pesos Only (ᵽ 12,000,000.00) Being The Abc To Payments Under The Contract For Each Lot/item. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Bislig City Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required One Hundred Twenty (120) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours From Monday To Friday At 8:00 Am – 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On September 16, 2024 From The Given Address And Website(s) Below Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos Only (p 25,000.00) The Procuring Entity Shall Allow The Bidder To Deposit At The City Government Of Bislig Lbp Account 2162-1017-68 And Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Bislig City Will Hold A Pre-bid Conference On September 24, 2024, 9:30 Am At Conference Room, Engineering Office, City Hall, Bislig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before October 08, 2024, 9:30 Am, Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On October 08, 2024, 9:30 Am At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Bislig City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 1 Unit Rescue Truck Brand New, (6-wheeler Truck)(base Vehicle) Specifications: *engine Type: 4-cylinder, Turbo Intercooler, Dohc, Common Rail Direct Injection, (at Least Euro Iv) *max. Output(hp): At Least 150hp@ 2,500rpm *max. Torque(nm): At Least 400 Nm @1,500-2,500rpm *engine Size/displacement: At Least 5,000cc *fuel Type: Diesel *fuel Tank Capacity: At Least 100liters *transmission: At Least 5-speed Manual *steering Typer: Power Steering *wheelbase: At Least 3,000mm *overall Dimension: At Least 6,000mm X 1,900mm X 2,200mm *wheel And Tires: At Least (7.50 X 16 X 10pr Tires) * Tire Quantity: 6 + 6pcs Spare Tires (all Tires Must Be Of The Same Brand) Wheel Configuration/drivetrain: - 4x4 (all-wheel Drive) *brake System: Drum Type *suspension: : Front: Multi-leaf Spring Rear: Multi-leaf Spring *gross Vehicle Weight (gvw): At Least 9,000kg (include Payload Weight) Features: * Tuner Radio With Usb, 2 Speakers / Air-conditioned Cabin Warranty: Two Years After Sales Service Will Be Provided Which Includes Technical Back-up, Maintenance And Repair Of The Unit And Its Components. Terms And Conditions: • Bidder Must Have An Authorized Service Center And Technician Within Region 11 & 13. • The Successful Bidder Will Send Two Personnel To Conduct Seminar/training For (5 Days) On The Operation And Maintenance Of The Unit And Rescue Equipment Upon Delivery Free Of Charge. • Free Preventive Maintenance Servicing For Up To 20,000kms. • The Bidder Must Be A Direct Distributor / Authorized Dealer Of The Product Sold To Lgu. • With Free 3 Years Lto Registration (or/cr) And Gsis Comprehensive Insurance Upon Delivery. • Successful Bidder Must Provide Complete Standard Tools, And English Parts Catalog & Operation Manual, Including Ewd And Hydraulic Jack. • Delivery Period: 120 Calendar Days Upon Receipt Of Notice To Proceed (ntp). • With Lgu Logo Stickers & Rescue Vehicle Decals. • Full Fuel Tank Upon Delivery (fob Bislig City) • Similar Unit (brand & Model) Must Be Present During The Conduct Of Post-qualification. • Bidder Must Have Completed A Contract Or Project Of Unit/vehicle (disaster/rescue Type) Either Sold To Government Or Private Entity) • (if Applicable): Provide 100l Diesel Exhaust Fluid Free Of Charge • Bidder Must Provide Brochure (with Specifications) Of The Product Offered Included In Bidding Documents • Brand Must Exist In The Market For At Least 10 Years • Pre-delivery Inspection Must Be Done Ii. General Body Built Up Body *body Shell Is Made Of 3mm Mild Steel Plate, Right / Left Sides, Front Rear, With Divider, All Cabinetries Are Made Of 2.5mm Mild Steel , All Framing Are Made Of Mild Steel, Running Board Is 3 Mm Aluminum Checkered Plate. *stainless Steel Ladder Installed At Rear Portion Of Body For Ascending And Descending From The Top. *with Equipment Mounting Bracket. Properly Fastened, Fitted And Bracketed. Crew Accomodation *enclosed Driving Compartment With Seating Capacity Of 3 Persons. The Crew Module Is Mounted Directly Behind The Drivers’ Cabin And Provides Forward Facing Seating For 4 Additional Crew. Cabinetry *provided With Adequate Size Cabinets For Rescue Equipment *with Left And Right Roll-up Door Cabinet Iii. Heavy Rescue Equipment: 1. Hydraulic Articulated Boom Arm With Basket And Outrigger Or Knuckle Type Boom With Basket And Outrigger - One (1) Set Hydraulic Articulate Boom Arm With Basket And Outrigger Or Knuckle Type With Basket And Outrigger · With Two Telescopic Boom Extension · With Power Take Off (pto) · 28ft (maximum) · Lift Capacity: At Least 280kgs 2. Front Winch: At Least 5 Tons 3. Hydraulic Light Duty Set (extrication Equipment) *3.1 One (1) Cutter Max. Cutting Opening : At Least 150mm Reach : At Least 120mm Round Bar Ability : Maximum 25mm *3.2 One (1) Unit Spreader Max. Spreading Opening : At Least 600 Mm Spreading Force At Base Of Arm Teeth : Maximum 30ton Spreading Force At Base Of Jaw : At Least 15 Ton Spreading Force 25mm From Tips : At Least 7 Ton Max. Pulling Opening : At Least 400 Mm Pulling Force : At Least 8.0 Ton Squeezing Force At Base Of Arm Teeth: At Least 10 Ton *3.3 One (1) Motor (hydraulic) Power Unit Running Time : At Least. 180min. Engine / Power Supply : At Least 2.0kw, 4-stroke Petrol Fuel Tank Capacity : At Least 0.7 Liter Pump : 3 Stage Radial Piston. Total Hydraulic Fluid Capacity : At Least 3.0 Liter *3.4 One (1) Teleram Dimensions (lxwxh) : At Least 300 X 200 X 250mm Maximum Extended Length : At Least 600mm Spreading/pushing Force (1st Stage): At Least 20 Ton Spreading/pushing Force (2ndstage): At Least 9 Ton *3.5 One (1) Combi Tool Cutting Force : At Least 20 Ton Spreading Opening : At Least 80mm Spreading Force : At Least 4 Ton Round Bar Ability : At Least 15mm *3.6 Two (2) 10-meter Hydraulic Hose – For Combi Tools *3.7 One (1) Chain And Shackle Set *3.8 One (1) Shoring Device (material: Aluminum Or Steel Or Stainless Steel) Weight : At Least 2.0kg Length : At Least 30cm Working Load : Maximum 15 Ton *3.9 Crib Blocks Set Inclusions: · Five (5) Pcs Cb 40 · Four (4) Pcs Cb 80 · Crib Blocks Cb 600 With Strap · Four (4) Pcs Wedge · Two (2) Pcs Rapid Stair With Strap · Five (5) Pcs Connector · Two (2) Pcs Saddle Wedge With Strap · One (1) Pc Transport And Storage Box 4. Lifting Equipment (hybrid Trolley) Inclusions: · Two (2) With Storage Case Operating Pressure : At Least 10 Bar Lifting Capacity : At Least 60 Tonnes Lifting Capacity At Max. Lifting Height : At Least 9 Tonnes Insertion Height : At Least 10mm / 45mm Max Lifting Height : N X At Least 400mm Safety Factor : >4 · One (1) Regulator Including 2m Black Rubber Inlet Hose · One (1) Handheld Dual Controller 12 Bar · One (1) Accessory Storage Case · One (1) Connector Key · One (1) Solid Quick Connector · One (1) Power Plate Plug · One (1) Power Plate · One (1) Floor Mat · One (1) Floor Mat Plug · One (1) Delivery Hose 12 Bar/10m/red · One (1) Delivery Hose 12 Bar/10m/yellow · One (1) Shut Off Hose 12 Bar/2m (red) With Safety Valve · One (1) Shut Off Hose 12 Bar/2m (yellow) With Safety Valve 5. Heavy Rescue Basic Set Inclusions: · Two (2) Shoring Device (material: Aluminum Or Steel Or Stainless Steel) Operating Pressure : At Least 10 Bar Span : Ranges From 80 - 140 Cm Total Length : At Least 95 Cm Working Load : At Least 15 Ton · Two (2) Shoring Device (material: Aluminum Or Steel Or Stainless Steel) Weight : At Least 2.0kg Length : At Least 30cm Working Load : Max. 15 Ton · Two (2) Power Plate · Two (2) Power Plate Plug · Two (2) Multi Swivel · Two (2) Rhino · Four (4) Rapid Rescue Single Strap · One (1) Heavy Rescue Multi Tool 6. High Angle Rescue Gear *6.1 Two (2) Rolls Kernmantle Rope: At Least (11mmx100m) *6.2 Two (2) Utility Rope: At Least (14mm X 100m) *6.3 Ten (10) Pcs Carabineer: (d-shape, Steel) *6.4 Five (5) Pcs 8-ring: (material: Steel) *6.5 Two (2) Pcs Single Pulley: (steel, Size: 10-12 Mm Rope) *6.6 Two (2) Pcs Tandem Pulley: (steel, Size: 10-12 Mm Rope) *6.7 Five (5) Pcs Seat Harness: (breaking Strength: At Least 15kn, With Adjustable Buckle, Leg Loops, Waist Belt, Protective Attachments, Equipment Loop, Elastic Webbing). 7. Medical Aid Gear *7.1 Four (4) Sets Standard First Aid Kit *7.2 Two (2) Pcs Spine Board With Strap *(material: Plastic) *7.3 Two (2) Pcs Fold Away Stretcher *( Material: Aluminum Alloy Material And Waterproof Leather Materials) *7.4 Five (5) Pcs Neck Support *7.5 Twenty (20) Pcs Triangular Bandage *7.6 One (1) Unit Automatic External Defibrillator (aed)* (energy Protocol : Between 200-360 J , Portable, Battery Operated, Led Display) 8. Other Equipment *8.1 One (1) Unit Portable Power Generator Set 5 Kva, Gasoline Driven *8.2 One (1) Set Trailer Tow Hitch For 5 Tons (combination Of Pintel Hook And Ball) *8.3 Two (2) Pcs Pick Head Axe *(fiberglass Or Wooden Handle) *8.4 Two (2) Pcs Crowbar *(between 80-120cm) *8.5 Two (2) Pcs Bolt Cutter *(hardened Alloy Steel Jaws) *8.6 Four (4) Pcs Shovel *(steel Or Wooden Handle) *8.7 Two (2) Pcs Sledgehammer *(fiberglass Or Wood Handle) *8.8 One (1) Pc Extension Ladder 10 Ft Up To18 Ft *(made Of Fiberglass) *8.9 One (1) Pc Halligan Bar *(made: Titanium, Beryllium Copper Or Stainless Steel) *8.10 One (1) Pc Chain Saw *(bar Length: At Least 30 Inches, Displacement: At Least 100 Cm^3, Power Output: At Least 4.0 Kw/hp) *8.11 One (1) Pc Circular Saw *(displacement: At Least 90 Cm^3, Power Output: At Least 5.0 Kw/hp) *8.12 One (1) Pc Jack Hammer (impact Energy: At Least 25 J, Continuous Rating Input: At Least 1500 W) *8.13 One (1) Set Standard Tool Set Iv. Electrical Equipment One (1) Set Bar Light At Least 100watts (color: Blue, Blue) And Amplifier With 5 Tone Siren And Microphone, Public Address System Two (2) Pcs Mounted Search Light Four (4) Pcs Strobe Light (rear) 7x9 Inches V. Paint Works A. General During Production Process The Vehicle (chassis) And Superstructure Will Be Protected By Paints And/or Anti-corrosion Products. Undercoating Shall Be Provided. B. Decals Truck Decals And Design (logo Stickers And Decals) Will Be Provided By The Lgu Bislig City And Will Be Installed By The Supplier.