City Of Baguio Tender

Description 6 Units 3” Ø Check Valve, Non-slam, Flanged Type, Pn 25 (please See Complete Specifications Below) Approved Budget Cost: ₱235,000.00 / Unit 7 Units 4” Ø Check Valve, Non-slam, Flanged Type, Pn 25 (please See Complete Specifications Below) Approved Budget Cost: ₱282,700.00 Check Valve, Non-slam, Flanged Type Specification: Connections: Flanged Iso 7005 Or Ansi B16; Pressure Range: Model 31, 32:7-360 Psi Max. Water Temp.: 80oc Or 180of Body And Cover: Ductile Iron Ggg50 (astm A-536) Main Valve Internal: Sst, Bronze And Coated Steel Diaphragm: Nylon Fabric Reinforced Epdm Seals: Nbr 13 Units 3” Ø Gate Valve, Flanged Type With Companion Steel Flanges And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱18,795.00 / Unit 12 Units 4” Ø Gate Valve, Flanged Type With Companion Steel Flanges And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱27,479.00 / Unit Gate Valve Flange Type Specification: Design Standard: Design Code: Hydraulic Test To Bs 5163 Maximum Pressure: Pn25 Inspection And Test Std.: Iso5208-1982 Or Acs Certificate 18 Acc Ny 369 Face To Face: En 558 Or Bs5163 Flange Drilling: En1092 Or En1092-2, Iso 7005-2 Materials: Body: Ductile Iron Gjs-500-7 Or Ggg50 Wedge Core: Ductile Iron (di) Wedge Rubber: Epdm Rubber Wedge Nut: Brass Stem: Stainless Steel 420 Bonnet Bolt: Steel, Zinc Plated Or Q235a Bonnet: Ductile Iron (di) O-ring: Nbr Rubber Thrust Collar: Brass Handwheel/stem Cap: Ductile Iron (di) Size / Dn Length (l) Mm Height (h) Mm Width Or D Mm Weight Kgs Dn80 (3”) 203 280-294 200 16-18 Dn100 (4”) 229 320-324 235 21-29 12 Pcs 2” Ball Valve / Stop Cock Ball Type-lock Wing (threaded) Approved Budget Cost: ₱8,425.00 / Pc Ball Valve Specifications: -elements Of The Valve Should Be Free From Dirt, And There Should Not Be Any Dirt, Chip, Burrs, And Flakes Etc. Before Assembling. -the Threaded Parts Of The Socket Should Be Coated With Sealing Glue. -the Valve Should Not Present Block To The Circulation Of Closing And Opening, And It Should Be Flexible. -when The Valve Is Fully Open, The Degree Of The Body Axis And Ball Axis Should Be Less Than 3 Degrees. -seal Test Should Be Carried And Testing Pressure Should Not Be Less Than 0.6mpa. -the Valve Should Be Turned Off During Delivery. Materials Body: Cw617n; Bonnet: Cw617n Ball: Hpb57-3; Ball Seat: Ptfe Sm031 Stem: Hpb57-3; Handle: Hpb57-3 Elastic Cylindrical Pin: Stainless Steel 12 Pcs 2” Air Release Valve Approved Budget Cost: ₱27,527.00 / Pc Combination Air Valves Specifications: Technical Specifications: • The Valve Shall Consist Of Two Floats (the Bottom And The Upper Float), The Bottom Float Drops And Allowing The Trapped Air To Be Vented Through The Small Nozzle At The Center Of The Top Float. • The Float Shall Have A Float Guide On Two Sides. • The Valve Shall Be Made Of Cast Iron / Ductile Iron With Glass Reinforced Plastic (grp) Inner Body • Float Body Shall Be Made Of Polypropylene And It Should Be Cylindrical / Trapezoid In Design I.b Parts Specification Of 2” Ø Combination Air Valves: Description Material Bonnet Pa6+30gf Cover D.i. Flanged Base D.i. Elbow Polypropylene Float Foam Pp Slider Pa6+30gf Seal Epdm Spacer Pom Auto Seal Epdm Flat Seal Epdm O-ring Nitrilic Rubber Id Plate Aluminum Screw Hex Sst Washer Sst Dimensions & Weights: 2” Ø Height (h) 259.50 Mm Width (w) 214 Mm Thread (d) 2” (bsp/npt) Nozzle Area (a) 12.85 Mm2 Total Width (l) - Drainage Diameter (e) 1 1⁄2” Bsp Kinetic Nozzle Area (k) 908 Mm Flange Iso 6/25 / Ansi 1 50 Weight 9 Kgs. Note: Not To Be Awarded On A One (1) Lot Basis. X X X X X This Is A Two (2) Envelope System: Envelope “a” To Contain The Following, Among Others: A) A Refundable Bid Bond In The Form Of Cash, Manager's Or Cashier's Check Equivalent To 2% Or A Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱50,000.00 And Above. Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration Regardless Of The Amount Of Bid; B) Terms Of Payment, Delivery, Warranty, Bid Validity, And Complete Specifications; C) Brochure/s (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱5,000.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship / Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; • For Bidders Who Have Principal Foreign Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship / Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship / Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. • For Locally Produced/manufactured Products, Only A Certificate Of Authorized Distributorship / Dealership W/o Red Ribbon Is Required If Applicable; F) Iso Certificate Issued To The Principal Supplier/participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); International Certificate Of Warranty. Envelope “b” To Contain The Bid Cost Per Unit.