City Of Baguio Tender

Description 6 Pieces 4” Ø Gate Valve, Flanged Type With Companion Flanges, And Bng Design Code: Hydraulic Test To Bs 5163 (din3230 /din3352) Or Jis B2043, Din 3352, Awwa C509, Bs5163 Maximum Pressure: Pn16 Or 16 Bar Temperature Range: -20 To 160 Degrees Centigrade Face To Face: Bs 5163 Or Jis B2002, Din 3202-f5, Din 3202-f4, Ansi B16.10, Bs 5163 End Flange: En1092-2 (iso 7005-2) Or Jis B2212 10k, Din 2533 Pn 10/16, Ansi 150#, Bs4504 Pn 10/16 Tightness Test: Operating Torque Test Or Jis B2003, Din3230, Awwa C509, Bs 6755 Materials: Body: Ductile Iron, Ggg-50 To Din 1693 (bs 2789 Grade 500-7) Or Ductile Iron Wedge: Ductile Iron (di) + Nbr Or Ductile Iron, Ggg-50, Core Fully Encapsulated With Epdm Rubber With Integral Wedge Nut Of Dezincification Resistant Brass, Cz 132 To Bs 2874 Wedge Nut: Brass Or Dezincification Resistant Brass Stem: Stainless Steel, Din X 20 Cr 13 Or Stainless Steel / Brass Bonnet Gasket: Epdm Rubber Or Epdm / Nbr Bonnet: Ductile Iron (di) Or Stainless Steel A2, Sealed With Hot Melt O-ring: Nbr Or Epdm / Nbr Stem Collar: Brass Gland Flange: Ductile Iron Or Ductile Iron Gjs-500-7(ggg-50) Dustproof Ring: Nbr Or Epdm / Nbr Hex Nut: Cast Iron Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width Or D Mm Weight Kgs Dn100 (4”) 229 334-430 200-220 26-28 Approved Budget Cost: ₱22,075.00 / Set 3 Pieces 4” Ø Check Valve, Non-slam 100mm Connections: Flanged Iso 7005 Or Ansi B16; Pressure Range: Model 31, 32:7-360 Psi Max. Water Temp.: 80oc Or 180of Body And Cover: Ductile Iron Ggg50 (astm A-536) Main Valve Internal: Sst, Bronze And Coated Steel Diaphragm: Nylon Fabric Reinforced Epdm Seals: Nbr Approved Budget Cost: ₱282,700.00 / Pc 4 Pieces 1” Ø Air Release Valve Pn16 - The Valve Shall Consist Of Two Floats (the Bottom And The Upper Float), The Bottom Float Drops And Allowing The Trapped Air To Be Vented Through The Small Nozzle At The Center Of The Top Float. - The Float Shall Have A Float Guide On Two Sides. - The Valve Shall Be Made Of Cast Iron/ Ductile Iron With Glass Reinforced Plastic (grp) Inner Body. - Float Body Shall Be Made Of Polypropylene And It Should Be Cylindrical/ Trapezoid In Design. Description Materials Base Brass Oring Nbr Automatic Float Foamed Polypropylene Automatic Seal Epdm Bonnet Pa6+30gf Drainage Polypropylene Id Plate Al Metallic Cover Cast Iron Dimensions And Weight 1” Ø Height (h) 137 Mm Width (w) 99.5 Mm Thread (d) 1” (bsp / Npt) Nozzle Area (a) 12.85mm2 Total Width (l) 116.5 Mm Drainage Diameter (e) ¼” Bsp Kinetic Nozzle Area (k) - Flange - Weight 2 Kgs. Approved Budget Cost: ₱14,272.00 / Pc 4 Pieces 1” Ø Ball Valve (threaded) -elements Of The Valve Should Be Free From Dirt, And There Should Not Be Any Dirt, Chip, Burrs, And Flakes Etc. Before Assembling. -the Threaded Parts Of The Socket Should Be Coated With Sealing Glue. -the Valve Should Not Present Block To The Circulation Of Closing And Opening, And It Should Be Flexible. -when The Valve Is Fully Open, The Degree Of The Body Axis And Ball Axis Should Be Less Than 3 Degrees. -seal Test Should Be Carried And Testing Pressure Should Not Be Less Than 0.6mpa. -the Valve Should Be Turned Off During Delivery. Materials Body: Cw617n; Bonnet: Cw617n Ball: Hpb57-3; Ball Seat: Ptfe Sm031 Stem: Hpb57-3; Handle: Hpb57-3 Elastic Cylindrical Pin: Stainless Steel Approved Budget Cost: ₱1,138.00 / Pc X X X X X Note: Not To Be Awarded On A One (1) Lot Basis This Is A Two (2) Envelope System: Envelope “a” To Contain The Following, Among Others: A) A Refundable Bid Bond In The Form Of Cash, A Manager's Or Cashier's Check Equivalent To 2%, Or A Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱ 50,000.00 And Above. The Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration, Regardless Of The Amount Of Bid. B) Terms Of Payment, Delivery, Warranty, Bid Validity, And Complete Specifications; C) Brochure(s) (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱5,000.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship Or Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; -for Bidders Who Have Principal Foreign Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship Or Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship Or Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. -for Locally Produced Or Manufactured Products, Only A Certificate Of Authorized Distributorship Or Dealership Without A Red Ribbon Is Required, If Applicable. F) Iso Certificate Issued To The Principal Supplier Or Participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty Envelope “b” To Contain The Bid Cost Per Unit.